This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Remove libc-do-syscall from sysdep-dl-routines added by:
commit 3b33d6ed60
Author: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Date: Sun Jan 8 11:38:23 2017 -0200
Rework -fno-omit-frame-pointer support on i386
and use auto-generated io/rtld-libc-do-syscall.os instead. This fixes
BZ #28936.
_STACK_GROWS_DOWN is defined to 0 when the stack grows up. The
code in unwind.c used `#ifdef _STACK_GROWS_DOWN' to selct the
stack grows down define for FRAME_LEFT. As a result, the
_STACK_GROWS_DOWN define was always selected and cleanups were
incorrectly sequenced when the stack grows up.
And optimize it slightly.
This is commit 8c8510ab27 revised.
In _dl_aux_init in elf/dl-support.c, use an explicit loop
and -fno-tree-loop-distribute-patterns to avoid memset.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
1. Also generate .d dependency files for $(tests-container) and
$(tests-printers).
2. elf: Add tst-auditmod17.os to extra-test-objs.
3. iconv: Add tst-gconv-init-failure-mod.os to extra-test-objs.
4. malloc: Rename extra-tests-objs to extra-test-objs.
5. linux: Add tst-sysconf-iov_max-uapi.o to extra-test-objs.
6. x86_64: Add tst-x86_64mod-1.o, tst-platformmod-2.o, test-libmvec.o,
test-libmvec-avx.o, test-libmvec-avx2.o and test-libmvec-avx512f.o to
extra-test-objs.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
With LC_MONETARY parsing fixed we can now generate locales
without forcing output with '-c'.
Removing '-c' from localedef invocation is the equivalent of
using -Werror for localedef. The glibc locale sources should
always be clean and free from warnings.
We remove '-c' from both test locale generation and the targets
used for installing locales e.g. install-locale-archive, and
install-locale-files.
Tested on x86_64 and i686 without regressions.
Tested with install-locale-archive target.
Tested with install-locale-files target.
Reviewed-by: DJ Delorie <dj@redhat.com>
ISO C17, POSIX Issue 7, and ISO 30112 all allow the char*
types to be empty strings i.e. "", integer or char values to
be -1 or CHAR_MAX respectively, with the exception of
decimal_point which must be non-empty in ISO C. Note that
the defaults for mon_grouping vary, but are functionaly
equivalent e.g. "\177" (no further grouping reuqired) vs.
"" (no grouping defined for all groups).
We include a broad comment talking about harmonizing ISO C,
POSIX, ISO 30112, and the default C/POSIX locale for glibc.
We reorder all setting based on locale/categories.def order.
We soften all missing definitions from errors to warnings when
defaults exist.
Given that ISO C, POSIX and ISO 30112 allow the empty string
we change LC_MONETARY handling of mon_decimal_point to allow
the empty string. If mon_decimal_point is not defined at all
then we pick the existing legacy glibc default value of
<U002E> i.e. ".".
We also set the default for mon_thousands_sep_wc at the
same time as mon_thousands_sep, but this is not a change in
behaviour, it is always either a matching value or L'\0',
but if in the future we change the default to a non-empty
string we would need to update both at the same time.
Tested on x86_64 and i686 without regressions.
Tested with install-locale-archive target.
Tested with install-locale-files target.
Reviewed-by: DJ Delorie <dj@redhat.com>
Whenever locale data for any locale included symbolic links, localedef
would throw the error "incomplete set of locale files" and exclude it
from the generated locale archive. This commit fixes that.
Co-authored-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Small sizes (<= 64) represent large portion of memset usages with zero
value. Add sizes (<= 64) to bench-bzero-walk.c to cover small sizes.
Reviewed-by: Sunil K Pandey <skpgkp2@gmail.com>
This patch adds following input to atanh accuracy test.
0x1.f80094p-8
Tested on x86-64 and i686 platforms.
Other platforms may have to regenerate ulps file.
Reviewed-by: Paul Zimmermann <Paul.Zimmermann@inria.fr>
The commit 737e873b30 ("resolv: Do not build libanl.so for ABIs starting
at 2.35") disabled building libanl for ports supporting only 2.35 and
later like OpenRISC.
However, the if statement was not updated quite correctly and the change
ends up disabling many tst-resolv* tests. This was not supposed to be
done and it causes test dependency errors like:
make: Entering directory 'gnu-home/glibc/resolv'
make: *** No rule to make target 'gnu-home/build-glibc/resolv/tst-resolv-res_ninit.out', needed by 'gnu-home/build-glibc/resolv/mtrace-tst-resolv-res_ninit.out'. Stop.
make: Leaving directory 'gnu-home/glibc/resolv'
This patch move the extra-libs += libanl definition and condition down
to be closer to other libanl definitions. The $(have-GLIBC_2.34)
condition now includes libanl-routines and libanl-shared-only-routines as
well.
Also, I have added a comment to endif of $(have-thread-library) to help
show the bondary of the have-thread-library definitions.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
memset with zero as the value to set is by far the majority value (99%+
for Python3 and GCC). Add bench-memset-zero-large.c,
bench-memset-zero-walk.c and bench-memset-zero.c to measure memset
implementations for zeroing.
Reviewed-by: Sunil K Pandey <skpgkp2@gmail.com>
The symbol is not present current POSIX specification and compiler
already generates memset call. The arch specific implementation
is just to avoid the __bzero symbol creation (which ia64 abi does
not export).
This change fixes two warnings from _dl_lookup_address.
The first warning comes from dropping the volatile keyword from
desc in the call to _dl_read_access_allowed. We now have a full
atomic barrier between loading desc[0] and the access check, so
desc no longer needs to be declared as volatile.
The second warning comes from the implicit declaration of
_dl_fix_reloc_arg. This is fixed by including dl-runtime.h and
declaring _dl_fix_reloc_arg in dl-runtime.h.
The current getcontext return trampoline is overly complex and it
unnecessarily clobbers several registers. By saving the context
pointer (r26) in the context, __getcontext_ret can restore any
registers not restored by setcontext. This allows getcontext to
save and restore the entire register context present when getcontext
is entered. We use the unused oR0 context slot for the return
from __getcontext_ret.
While this is not directly useful in C, it can be exploited in
assembly code. Registers r20, r23, r24 and r25 are not clobbered
in the call path to getcontext. This allows a small simplification
of swapcontext.
It also allows saving and restoring the 6-bit SAR register in the
LSB of the oSAR context slot. The getcontext flag value can be
stored in the MSB of the oSAR slot.
Changes in v2:
1. Update commit log.
commit 163f625cf9
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Tue Dec 21 12:35:47 2021 -0800
elf: Remove excessive p_align check on PT_LOAD segments [BZ #28688]
removed the p_align check against the page size. It caused the loader
error or crash on elf/tst-p_align3 when loading elf/tst-p_alignmod3.so,
which has the invalid p_align in PT_LOAD segments, added by
commit d8d94863ef
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Tue Dec 21 13:42:28 2021 -0800
The loader failure caused by a negative length passed to __mprotect is
random, depending on architecture and toolchain. Update _dl_map_segments
to detect invalid holes. This fixes BZ #28838.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
On failure, the contents of the resolved buffer passed in by the caller
to realpath are undefined. Do not copy any partial resolution to the
buffer and also do not test resolved contents in test-canon.c.
Resolves: BZ #28815
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Previously TEST_NAME was passing a function pointer. This didn't fail
because of the -Wno-error flag (to allow for overflow sizes passed
to strncmp/wcsncmp)
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
In the overflow fallback strncmp-avx2-rtm and wcsncmp-avx2-rtm would
call strcmp-avx2 and wcscmp-avx2 respectively. This would have
not checks around vzeroupper and would trigger spurious
aborts. This commit fixes that.
test-strcmp, test-strncmp, test-wcscmp, and test-wcsncmp all pass on
AVX2 machines with and without RTM.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
This change fixes the failure of stdlib/tst-setcontext2 and
stdlib/tst-setcontext7 on hppa. The implementation of swapcontext
in C is broken. C saves the return pointer (rp) and any non
call-clobbered registers (in this case r3, r4 and r5) on the
stack. However, the setcontext call in swapcontext pops the
stack and subsequent calls clobber the saved registers. When
the context in oucp is restored, both tests fault.
Here we rewrite swapcontext in assembly code to avoid using
the stack for register values that need to be used after
restoration. The getcontext and setcontext routines are
revised to save and restore register ret1 for normal returns.
We copy the oucp pointer to ret1. This allows access to
the old context after calling getcontext and setcontext.
