Commit Graph

124 Commits

Author SHA1 Message Date
Paul Eggert
dff8da6b3e Update copyright dates with scripts/update-copyrights 2024-01-01 10:53:40 -08:00
Paul Pluzhnikov
7f0d9e61f4 Fix all the remaining misspellings -- BZ 25337 2023-06-02 01:39:48 +00:00
Frédéric Bérat
a952fcda58 nptl_db/thread_dbP.h: fix warn unused result
Fix unused result warnings, detected when _FORTIFY_SOURCE is enabled in
glibc.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
2023-06-01 13:00:03 -04:00
Joseph Myers
6d7e8eda9b Update copyright dates with scripts/update-copyrights 2023-01-06 21:14:39 +00:00
Paul E. Murphy
aa13fd1618 nptl_db: disable DT_RELR on libthread_db.so
Some nptl tests inadvertently use the host's gdb to verify
libthread_db.so, which is loaded with the host's runtime.  This causes
a couple of test failures when the host glibc does not support DT_RELR.

The not correct, but simple, workaround is to build without DT_RELR
as this library is otherwise likely to load on glibc 2.17 and newer
today.

This allows tst-pthread-gdb-attach{,-static} to continue working
when testing on a gdb loaded with an older glibc.

This avoids a failure in tst-pthread-gdb-attach similar to:

  Trying host libthread_db library: .../build/glibc/nptl_db/libthread_db.so.1.
  dlopen failed: /lib64/libc.so.6: version `GLIBC_ABI_DT_RELR' not found (required by .../build/glibc/nptl_db/libthread_db.so.1).

Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2022-06-08 11:17:47 -05:00
Paul Eggert
581c785bf3 Update copyright dates with scripts/update-copyrights
I used these shell commands:

../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")

and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.

I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah.  I don't
know why I run into these diagnostics whereas others evidently do not.

remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
2022-01-01 11:40:24 -08:00
Siddhesh Poyarekar
30891f35fa Remove "Contributed by" lines
We stopped adding "Contributed by" or similar lines in sources in 2012
in favour of git logs and keeping the Contributors section of the
glibc manual up to date.  Removing these lines makes the license
header a bit more consistent across files and also removes the
possibility of error in attribution when license blocks or files are
copied across since the contributed-by lines don't actually reflect
reality in those cases.

Move all "Contributed by" and similar lines (Written by, Test by,
etc.) into a new file CONTRIBUTED-BY to retain record of these
contributions.  These contributors are also mentioned in
manual/contrib.texi, so we just maintain this additional record as a
courtesy to the earlier developers.

The following scripts were used to filter a list of files to edit in
place and to clean up the CONTRIBUTED-BY file respectively.  These
were not added to the glibc sources because they're not expected to be
of any use in future given that this is a one time task:

https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dc
https://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02

Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2021-09-03 22:06:44 +05:30
Florian Weimer
3640654575 nptl_db: Re-use the ELF-to-abilist converter for ABI checking
The previous approach uses readelf -DWs, which does not produce
a stable output format (older binutils versions do not include
symbol version information).  This commit re-uses scripts/abilist.awk
with a tweak to include GLIBC_PRIVATE symbols.  This awk script
is based on objdump -T output, which appears to be stable over time.

Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
2021-06-29 22:17:08 +02:00
Florian Weimer
fef400a2f9 nptl: Export libthread_db-used symbols under GLIBC_PRIVATE
This allows distributions to strip debugging information from
libc.so.6 without impacting the debugging experience.

Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2021-06-28 15:05:42 +02:00
Florian Weimer
b369cc4e9c nptl: Rename nptl_version to __nptl_version
This prepares it for exporting as a dynamic symbol.

Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
2021-06-28 14:34:48 +02:00
Florian Weimer
d22705e7de nptl_db: Clean up main/rtld variable handling
Most symbols are now in libc.so.6.  The "main" (exempted from
coverage checks) status is therefore not necessary.  Use
DB_MAIN_VARIABLE for the remaining separate symbol,
__nptl_initial_report_events.  DB_RTLD_VARIABLE is now unused, so
remove it.

Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
2021-06-28 14:34:32 +02:00
Florian Weimer
86f0179bc0 nptl_db: Install libthread_db under a regular implementation name
Currently, the name is always libthread_db-1.0.so.  It does not change
with the glibc version, like the other libraries.

GDB hard-codes libthread_db.so.1 (the soname), so this change does not
affect loading libthread_db.

Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
2021-06-28 08:33:57 +02:00
Florian Weimer
3c79234c7a nptl: Move pthreadP.h into sysdeps directory
This mirrors the situation on Hurd.  These directories are on
the include search part, so #include <pthreadP.h> works after this
change on both Hurd and nptl.

Reviewed-by: Adhemerval Zanella  <adhemerval.zanella@linaro.org>
2021-06-22 09:51:10 +02:00
Florian Weimer
f47f1d91af nptl: Move pthread_create, thrd_create into libc
The symbols were moved using scripts/move-symbol-to-libc.py.

The libpthread placeholder symbols need some changes because some
symbol versions have gone away completely.  But
__errno_location@@GLIBC_2.0 still exists, so the GLIBC_2.0 version
is still there.

The internal __pthread_create symbol now points to the correct
function, so the sysdeps/nptl/thrd_create.c override is no longer
necessary.

There was an issue how the hidden alias of pthread_getattr_default_np
was defined, so this commit cleans up that aspects and removes the
GLIBC_PRIVATE export altogether.

Reviewed-by: Adhemerval Zanella  <adhemerval.zanella@linaro.org>
2021-05-21 22:35:00 +02:00
Florian Weimer
23ce1cf35a nptl: Move __nptl_create_event, __nptl_death_event into libc
In libthread_db, use the exported GLIBC_PRIVATE symbols directly
instead of relying on _thread_db_* variables in libpthread
(which used to be created by the DB_FUNCTION macros).

Reviewed-by: Adhemerval Zanella  <adhemerval.zanella@linaro.org>
2021-05-17 10:06:44 +02:00
Florian Weimer
a78e5979a9 nptl: Move __nptl_initial_report_events into ld.so/startup code
The initialization of the report_events TCB field is now performed
in __tls_init_tp instead of __pthread_initialize_minimal_internal
(in libpthread).

The events interface is difficult to test because GDB stopped using it
in 2015.  The td_thr_get_info change to ignore lookup issues is enough
to support GDB with this change.

Reviewed-by: Adhemerval Zanella  <adhemerval.zanella@linaro.org>
2021-05-17 10:04:06 +02:00
Florian Weimer
a91bf4e0ff nptl: Move __pthread_keys global variable into libc
This prepares moving pthread_exit, and later the pthread_key_create
infrastructure.

Reviewed-by: Adhemerval Zanella  <adhemerval.zanella@linaro.org>
2021-04-21 19:49:50 +02:00
Florian Weimer
7a7229de1d nptl_db: Introduce DB_MAIN_ARRAY_VARIABLE
And document the reason for DB_ARRAY_VARIABLE.

Reviewed-by: Adhemerval Zanella  <adhemerval.zanella@linaro.org>
2021-04-21 19:49:50 +02:00
Florian Weimer
43fe356d18 nptl: Move internal __nptl_nthreads variable into libc
Reviewed-by: Adhemerval Zanella   <adhemerval.zanella@linaro.org>
2021-04-21 19:49:50 +02:00
Florian Weimer
a64afc2252 nptl_db: Support different libpthread/ld.so load orders (bug 27744)
libthread_db is loaded once GDB encounters libpthread, and at this
point, ld.so may not have been processed by GDB yet. As a result,
_rtld_global cannot be accessed by regular means from libthread_db.
To make this work until GDB can be fixed, acess _rtld_global through
a pointer stored in libpthread.

The new test does not reproduce bug 27744 with
--disable-hardcoded-path-in-tests, but is still a valid smoke test.
With --enable-hardcoded-path-in-tests, it is necessary to avoid
add-symbol-file because this can tickle a GDB bug.

Fixes commit 1daccf403b ("nptl: Move
stack list variables into _rtld_global").

Tested-by: Emil Velikov <emil.velikov@collabora.com>
2021-04-21 11:50:43 +02:00
Paul Eggert
2b778ceb40 Update copyright dates with scripts/update-copyrights
I used these shell commands:

../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")

and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
2021-01-02 12:17:34 -08:00
Dmitry V. Levin
14ef9c185b treewide: fix incorrect spelling of indices in comments
Replace 'indeces' with 'indices', the most annoying of these typos were
those found in elf.h which is a public header file copied to other
projects.
2020-12-11 02:00:00 +00:00
Florian Weimer
1daccf403b nptl: Move stack list variables into _rtld_global
Now __thread_gscope_wait (the function behind THREAD_GSCOPE_WAIT,
formerly __wait_lookup_done) can be implemented directly in ld.so,
eliminating the unprotected GL (dl_wait_lookup_done) function
pointer.

Reviewed-by: Adhemerval Zanella  <adhemerval.zanella@linaro.org>
2020-11-16 19:33:30 +01:00
Martin Sebor
3eff7504ca Avoid GCC 11 -Warray-parameter warnings [BZ #26686].
Building Glibc with the latest GCC 11 also shows a couple of instances
of the new -Warray-parameter warning in the thread db APIs.

To avoid these, this patch changes the deefinitions of the two functions
to match their definitions.
2020-10-08 12:46:03 -06:00
Joseph Myers
d614a75396 Update copyright dates with scripts/update-copyrights. 2020-01-01 00:14:33 +00:00
Florian Weimer
cba932a5a9 slotinfo in struct dtv_slotinfo_list should be flexible array [BZ #25097]
GCC 10 will warn about subscribing inner length zero arrays.  Use a GCC
extension in csu/libc-tls.c to allocate space for the static_slotinfo
variable.  Adjust nptl_db so that the type description machinery does
not attempt to determine the size of the flexible array member slotinfo.

Change-Id: I51be146a7857186a4ede0bb40b332509487bdde8
2019-11-12 13:54:30 +01:00
Paul Eggert
5a82c74822 Prefer https to http for gnu.org and fsf.org URLs
Also, change sources.redhat.com to sourceware.org.
This patch was automatically generated by running the following shell
script, which uses GNU sed, and which avoids modifying files imported
from upstream:

sed -ri '
  s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g
  s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g
' \
  $(find $(git ls-files) -prune -type f \
      ! -name '*.po' \
      ! -name 'ChangeLog*' \
      ! -path COPYING ! -path COPYING.LIB \
      ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \
      ! -path manual/texinfo.tex ! -path scripts/config.guess \
      ! -path scripts/config.sub ! -path scripts/install-sh \
      ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \
      ! -path INSTALL ! -path  locale/programs/charmap-kw.h \
      ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \
      ! '(' -name configure \
            -execdir test -f configure.ac -o -f configure.in ';' ')' \
      ! '(' -name preconfigure \
            -execdir test -f preconfigure.ac ';' ')' \
      -print)

and then by running 'make dist-prepare' to regenerate files built
from the altered files, and then executing the following to cleanup:

  chmod a+x sysdeps/unix/sysv/linux/riscv/configure
  # Omit irrelevant whitespace and comment-only changes,
  # perhaps from a slightly-different Autoconf version.
  git checkout -f \
    sysdeps/csky/configure \
    sysdeps/hppa/configure \
    sysdeps/riscv/configure \
    sysdeps/unix/sysv/linux/csky/configure
  # Omit changes that caused a pre-commit check to fail like this:
  # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines
  git checkout -f \
    sysdeps/powerpc/powerpc64/ppc-mcount.S \
    sysdeps/unix/sysv/linux/s390/s390-64/syscall.S
  # Omit change that caused a pre-commit check to fail like this:
  # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline
  git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
2019-09-07 02:43:31 -07:00
Florian Weimer
a198d37ade Move remaining nptl_db headers to sysdeps/nptl
sys/procfs.h was already using this sysdeps directory.

This avoids the need for  nptl-specific wrapper headers under
include/, a generic location in the source tree.
2019-02-16 08:25:16 +01:00
Joseph Myers
04277e02d7 Update copyright dates with scripts/update-copyrights.
* All files with FSF copyright notices: Update copyright dates
	using scripts/update-copyrights.
	* locale/programs/charmap-kw.h: Regenerated.
	* locale/programs/locfile-kw.h: Likewise.
2019-01-01 00:11:28 +00:00
Maciej W. Rozycki
b717c14fb1 nptl_db: Remove stale match_pid' parameter from iterate_thread_list'
Complement commit c579f48edb ("Remove cached PID/TID in clone") and
remove the `match_pid' parameter not used by `iterate_thread_list' any
longer.  Update call sites accordingly.

	* nptl_db/td_ta_thr_iter.c (iterate_thread_list): Remove
	`match_pid' parameter.
	(td_ta_thr_iter): Update accordingly.
2018-03-01 16:10:05 +00:00
Joseph Myers
688903eb3e Update copyright dates with scripts/update-copyrights.
* All files with FSF copyright notices: Update copyright dates
	using scripts/update-copyrights.
	* locale/programs/charmap-kw.h: Regenerated.
	* locale/programs/locfile-kw.h: Likewise.
2018-01-01 00:32:25 +00:00
Zack Weinberg
ce870587d5 Move all old ChangeLogs to a top-level ChangeLog.old directory. 2017-09-01 09:31:43 -04:00
Zack Weinberg
9090848d06 Narrowing the visibility of libc-internal.h even further.
posix/wordexp-test.c used libc-internal.h for PTR_ALIGN_DOWN; similar
to what was done with libc-diag.h, I have split the definitions of
cast_to_integer, ALIGN_UP, ALIGN_DOWN, PTR_ALIGN_UP, and PTR_ALIGN_DOWN
to a new header, libc-pointer-arith.h.

It then occurred to me that the remaining declarations in libc-internal.h
are mostly to do with early initialization, and probably most of the
files including it, even in the core code, don't need it anymore.  Indeed,
only 19 files actually need what remains of libc-internal.h.  23 others
need libc-diag.h instead, and 12 need libc-pointer-arith.h instead.
No file needs more than one of them, and 16 don't need any of them!

So, with this patch, libc-internal.h stops including libc-diag.h as
well as losing the pointer arithmetic macros, and all including files
are adjusted.

        * include/libc-pointer-arith.h: New file.  Define
	cast_to_integer, ALIGN_UP, ALIGN_DOWN, PTR_ALIGN_UP, and
        PTR_ALIGN_DOWN here.
        * include/libc-internal.h: Definitions of above macros
	moved from here.  Don't include libc-diag.h anymore either.
	* posix/wordexp-test.c: Include stdint.h and libc-pointer-arith.h.
        Don't include libc-internal.h.

	* debug/pcprofile.c, elf/dl-tunables.c, elf/soinit.c, io/openat.c
	* io/openat64.c, misc/ptrace.c, nptl/pthread_clock_gettime.c
	* nptl/pthread_clock_settime.c, nptl/pthread_cond_common.c
	* string/strcoll_l.c, sysdeps/nacl/brk.c
	* sysdeps/unix/clock_settime.c
	* sysdeps/unix/sysv/linux/i386/get_clockfreq.c
	* sysdeps/unix/sysv/linux/ia64/get_clockfreq.c
	* sysdeps/unix/sysv/linux/powerpc/get_clockfreq.c
	* sysdeps/unix/sysv/linux/sparc/sparc64/get_clockfreq.c:
	Don't include libc-internal.h.

	* elf/get-dynamic-info.h, iconv/loop.c
	* iconvdata/iso-2022-cn-ext.c, locale/weight.h, locale/weightwc.h
	* misc/reboot.c, nis/nis_table.c, nptl_db/thread_dbP.h
	* nscd/connections.c, resolv/res_send.c, soft-fp/fmadf4.c
	* soft-fp/fmasf4.c, soft-fp/fmatf4.c, stdio-common/vfscanf.c
	* sysdeps/ieee754/dbl-64/e_lgamma_r.c
	* sysdeps/ieee754/dbl-64/k_rem_pio2.c
	* sysdeps/ieee754/flt-32/e_lgammaf_r.c
	* sysdeps/ieee754/flt-32/k_rem_pio2f.c
	* sysdeps/ieee754/ldbl-128/k_tanl.c
	* sysdeps/ieee754/ldbl-128ibm/k_tanl.c
	* sysdeps/ieee754/ldbl-96/e_lgammal_r.c
	* sysdeps/ieee754/ldbl-96/k_tanl.c, sysdeps/nptl/futex-internal.h:
	Include libc-diag.h instead of libc-internal.h.

        * elf/dl-load.c, elf/dl-reloc.c, locale/programs/locarchive.c
        * nptl/nptl-init.c, string/strcspn.c, string/strspn.c
	* malloc/malloc.c, sysdeps/i386/nptl/tls.h
	* sysdeps/nacl/dl-map-segments.h, sysdeps/x86_64/atomic-machine.h
	* sysdeps/unix/sysv/linux/spawni.c
        * sysdeps/x86_64/nptl/tls.h:
        Include libc-pointer-arith.h instead of libc-internal.h.

	* elf/get-dynamic-info.h, sysdeps/nacl/dl-map-segments.h
	* sysdeps/x86_64/atomic-machine.h:
        Add multiple include guard.
2017-03-01 20:33:46 -05:00
Joseph Myers
bfff8b1bec Update copyright dates with scripts/update-copyrights. 2017-01-01 00:14:16 +00:00
Adhemerval Zanella
c579f48edb Remove cached PID/TID in clone
This patch remove the PID cache and usage in current GLIBC code.  Current
usage is mainly used a performance optimization to avoid the syscall,
however it adds some issues:

  - The exposed clone syscall will try to set pid/tid to make the new
    thread somewhat compatible with current GLIBC assumptions.  This cause
    a set of issue with new workloads and usecases (such as BZ#17214 and
    [1]) as well for new internal usage of clone to optimize other algorithms
    (such as clone plus CLONE_VM for posix_spawn, BZ#19957).

  - The caching complexity also added some bugs in the past [2] [3] and
    requires more effort of each port to handle such requirements (for
    both clone and vfork implementation).

  - Caching performance gain in mainly on getpid and some specific
    code paths.  The getpid performance leverage is questionable [4],
    either by the idea of getpid being a hotspot as for the getpid
    implementation itself (if it is indeed a justifiable hotspot a
    vDSO symbol could let to a much more simpler solution).

    Other usage is mainly for non usual code paths, such as pthread
    cancellation signal and handling.

For thread creation (on stack allocation) the code simplification in fact
adds some performance gain due the no need of transverse the stack cache
and invalidate each element pid.

Other thread usages will require a direct getpid syscall, such as
cancellation/setxid signal, thread cancellation, thread fail path (at
create_thread), and thread signal (pthread_kill and pthread_sigqueue).
However these are hardly usual hotspots and I think adding a syscall is
justifiable.

It also simplifies both the clone and vfork arch-specific implementation.
And by review each fork implementation there are some discrepancies that
this patch also solves:

  - microblaze clone/vfork does not set/reset the pid/tid field
  - hppa uses the default vfork implementation that fallback to fork.
    Since vfork is deprecated I do not think we should bother with it.

The patch also removes the TID caching in clone. My understanding for
such semantic is try provide some pthread usage after a user program
issue clone directly (as done by thread creation with CLONE_PARENT_SETTID
and pthread tid member).  However, as stated before in multiple discussions
threads, GLIBC provides clone syscalls without further supporting all this
semantics.

I ran a full make check on x86_64, x32, i686, armhf, aarch64, and powerpc64le.
For sparc32, sparc64, and mips I ran the basic fork and vfork tests from
posix/ folder (on a qemu system).  So it would require further testing
on alpha, hppa, ia64, m68k, nios2, s390, sh, and tile (I excluded microblaze
because it is already implementing the patch semantic regarding clone/vfork).

[1] https://codereview.chromium.org/800183004/
[2] https://sourceware.org/ml/libc-alpha/2006-07/msg00123.html
[3] https://sourceware.org/bugzilla/show_bug.cgi?id=15368
[4] http://yarchive.net/comp/linux/getpid_caching.html

	* sysdeps/nptl/fork.c (__libc_fork): Remove pid cache setting.
	* nptl/allocatestack.c (allocate_stack): Likewise.
	(__reclaim_stacks): Likewise.
	(setxid_signal_thread): Obtain pid through syscall.
	* nptl/nptl-init.c (sigcancel_handler): Likewise.
	(sighandle_setxid): Likewise.
	* nptl/pthread_cancel.c (pthread_cancel): Likewise.
	* sysdeps/unix/sysv/linux/pthread_kill.c (__pthread_kill): Likewise.
	* sysdeps/unix/sysv/linux/pthread_sigqueue.c (pthread_sigqueue):
	Likewise.
	* sysdeps/unix/sysv/linux/createthread.c (create_thread): Likewise.
	* sysdeps/unix/sysv/linux/getpid.c: Remove file.
	* nptl/descr.h (struct pthread): Change comment about pid value.
	* nptl/pthread_getattr_np.c (pthread_getattr_np): Remove thread
	pid assert.
	* sysdeps/unix/sysv/linux/pthread-pids.h (__pthread_initialize_pids):
	Do not set pid value.
	* nptl_db/td_ta_thr_iter.c (iterate_thread_list): Remove thread
	pid cache check.
	* nptl_db/td_thr_validate.c (td_thr_validate): Likewise.
	* sysdeps/aarch64/nptl/tcb-offsets.sym: Remove pid offset.
	* sysdeps/alpha/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/arm/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/hppa/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/i386/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/ia64/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/m68k/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/microblaze/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/mips/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/nios2/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/powerpc/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/s390/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/sh/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/sparc/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/tile/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/x86_64/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/unix/sysv/linux/aarch64/clone.S: Remove pid and tid caching.
	* sysdeps/unix/sysv/linux/alpha/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/arm/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/hppa/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/i386/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/ia64/clone2.S: Likewise.
	* sysdeps/unix/sysv/linux/mips/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/nios2/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/sh/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/tile/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/aarch64/vfork.S: Remove pid set and reset.
	* sysdeps/unix/sysv/linux/alpha/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/arm/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/i386/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/ia64/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/m68k/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/m68k/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/mips/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/nios2/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/sh/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/tile/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/tst-clone2.c (f): Remove direct pthread
	struct access.
	(clone_test): Remove function.
	(do_test): Rewrite to take in consideration pid is not cached anymore.
2016-11-24 19:38:51 -02:00
Carlos O'Donell
bb5badf170 Bug 20729: Include libc-internal.h where required.
The original fix for bug 20729 failed to include
libc-internal.h in the files that needed them and
this caused build failures on machines that don't
implicitly include this header. This commit fixes
that by following the consensus rule that a header,
if needed, should always be directly included.
2016-10-31 16:46:57 -04:00
Carlos O'Donell
93fe09cb5f Bug 20729: Fix building with -Os.
This commit adds a new DIAG_IGNORE_Os_NEEDS_COMMENT which is only
enabled when compiling with -Os. This allows developers working on
-Os enabled builds to mark false-positive warnings without impacting the
warnings emitted at -O2.

Then using the new DIAG_IGNORE_Os_NEEDS_COMMENT we fix 6 warnings
generated with GCC 5 to get -Os builds working again.
2016-10-29 23:50:56 -04:00
Zack Weinberg
11160cb76f Installed-header hygiene (BZ#20366): obsolete BSD u_* types.
The types u_char, u_short, u_int, u_long, ushort, uint, ulong, u_int8_t,
u_int16_t, u_int32_t, u_int64_t, quad_t, and u_quad_t are BSDisms that
have never been standardized.  While glibc should continue to *provide*
these types for compatibility's sake, its public headers should not
use them.

The meat of this change was mechanically generated by the following
shell command:

    perl -pi~ -e '
        s/\b(__)?u_char\b/unsigned char/g;
        s/\b(__)?u_?short\b/unsigned short/g;
        s/\b(__)?u_?int\b/unsigned int/g;
        s/\b(__)?u_?long\b/unsigned long/g;
        s/\b(__)?u_int8_t\b/uint8_t/g;
        s/\b(__)?u_int16_t\b/uint16_t/g;
        s/\b(__)?u_int32_t\b/uint32_t/g;
        s/\b(__)?u_int64_t\b/uint64_t/g;
        s/\b(__)?u_quad_t\b/uint64_t/g;
        s/\b(__)?quad_t\b/uint64_t/g;
    ' $(grep -lE -e '\<((__)?(quad_t|u(short|int|long|_(char|short|int([0-9]+_t)?|long|quad_t))))\>' \
        $(grep -LE '\<(_(SYS|BITS)_TYPES_H|rpc/(rpc|rpc_msg|types|xdr)\.h)\>' \
          $(find . \( -false $(sed 's/^/-o -name /' all-installed-headers) \
                   \) -printf '%P\n' | sort -u)))

where 'all-installed-headers' was a list of the basenames of all installed
header files, manually extracted from the Makefiles.  Non-installed
wrapper headers in include/ are also adjusted, for consistency.
I then manually fixed up indentation and line-wrapping.

sys/types.h and bits/types.h are excluded because they must continue
to define the u_* types (under __USE_MISC) for compatibility with
applications.  They do not use these types themselves.

All headers that (transitively) include rpc/types.h are also excluded,
for three reasons.  First, the u_* types are defined by rpc/types.h,
unconditionally (not just under __USE_MISC) so they are logically part
of the SunRPC API.  Second, many of those headers appear to be
machine-generated.  Third, it's my understanding that we are getting
rid of as much of SunRPC as possible in the near future.

(The one file under sunrpc/ that's touched, sunrpc/rpc/rpc_des.h, does
*not* include rpc/types.h.  This may itself be a bug.)

After changing from u_intNN_t to uintNN_t, a number of headers now
need to include stdint.h to pick up those types.  It might be more
hygenic, namespace-wise, to use __uintNN_t instead, but none of these
headers are bound by ISO or POSIX to do so, and it's unlikely that
anyone using them will be bothered.  (The two files that were using
__-prefixed versions of the u_types, sysdeps/mach/hurd/net/route.h and
sysdeps/unix/sysv/linux/net/route.h, both already also contained uses of
the unprefixed versions.)

Some of these files directly included features.h and/or sys/cdefs.h,
which I removed, as the style generally seems to be to let sys/types.h
do that for us.  (This does not change the set of definitions exposed
by any header; sys/types.h unconditionally includes both features.h
and sys/cdefs.h.)

One file included asm/types.h unnecessarily.

	* bits/in.h, gmon/sys/gmon.h, inet/netinet/igmp.h
	* inet/protocols/routed.h, inet/protocols/talkd.h
	* inet/protocols/timed.h, io/fts.h, nptl_db/thread_db.h
	* resolv/arpa/nameser.h, resolv/resolv.h, sunrpc/rpc/rpc_des.h
	* sysdeps/generic/netinet/if_ether.h
	* sysdeps/generic/netinet/in_systm.h
	* sysdeps/generic/netinet/ip.h, sysdeps/generic/netinet/tcp.h
	* sysdeps/gnu/netinet/ip_icmp.h, sysdeps/gnu/netinet/tcp.h
	* sysdeps/gnu/netinet/udp.h, sysdeps/mach/hurd/net/ethernet.h
	* sysdeps/mach/hurd/net/if_arp.h
	* sysdeps/mach/hurd/net/if_ppp.h
	* sysdeps/mach/hurd/net/route.h, sysdeps/mach/sys/reboot.h
	* sysdeps/unix/sysv/linux/bits/in.h
	* sysdeps/unix/sysv/linux/net/ethernet.h
	* sysdeps/unix/sysv/linux/net/if_arp.h
	* sysdeps/unix/sysv/linux/net/if_ppp.h
	* sysdeps/unix/sysv/linux/net/if_shaper.h
	* sysdeps/unix/sysv/linux/net/route.h
	* sysdeps/unix/sysv/linux/netinet/if_ether.h
	* sysdeps/unix/sysv/linux/netinet/if_fddi.h
	* sysdeps/unix/sysv/linux/netinet/if_tr.h
	* sysdeps/unix/sysv/linux/netipx/ipx.h
	* sysdeps/unix/sysv/linux/sys/acct.h
	* include/arpa/nameser.h, include/resolv.h:
	Change all uses of u_char to unsigned char,
	u_short and ushort to unsigned short, u_int and uint to unsigned int,
	u_long and ulong to unsigned long, u_int8_t to uint8_t,
        u_int16_t to uint16_t, u_int32_t to uint32_t, quad_t to int64_t,
	and u_int64_t and u_quad_t to uint64_t.

	* mach/sys/reboot.h: Remove two casts of integer literals
	to the types they already have.

	* bits/in.h: Correct error in description of IP_MULTICAST_LOOP.
	* sysdeps/unix/sysv/linux/bits/in.h: Likewise.
	* sysdeps/unix/sysv/linux/netinet/if_ether.h: Change a comment
	from referring to 'unsigned char' to 'uint8_t' for consistency with
	the macro definition below.

	* gmon/sys/gmon.h, inet/netinet/igmp.h, inet/protocols/talkd.h
	* io/fts.h, resolv/arpa/nameser.h, resolv/resolv.h
	* sunrpc/rpc/rpc_des.h, sysdeps/generic/netinet/ip.h
	* sysdeps/gnu/netinet/tcp.h, sysdeps/gnu/netinet/udp.h
	* sysdeps/mach/hurd/net/if_ppp.h, sysdeps/unix/sysv/linux/net/if_ppp.h
	* sysdeps/unix/sysv/linux/sys/acct.h
	* include/arpa/nameser.h, include/resolv.h:
	Fix indentation disrupted by mechanical edits.

	* inet/protocols/talkd.h, resolv/arpa/nameser.h
	* sysdeps/generic/netinet/in_systm.h
	* sysdeps/gnu/netinet/ip_icmp.h, sysdeps/gnu/netinet/tcp.h
	* sysdeps/gnu/netinet/udp.h
	* sysdeps/unix/sysv/linux/net/ethernet.h
	* sysdeps/unix/sysv/linux/net/if_arp.h
	* sysdeps/unix/sysv/linux/net/if_ppp.h
	* sysdeps/unix/sysv/linux/net/if_shaper.h
	* sysdeps/unix/sysv/linux/netinet/if_fddi.h
	* sysdeps/unix/sysv/linux/netinet/if_tr.h
	* sysdeps/unix/sysv/linux/netipx/ipx.h
	* sysdeps/unix/sysv/linux/sys/acct.h
	Include stdint.h for uintNN_t definitions.
	Don't include sys/cdefs.h, features.h, or asm/types.h directly.
2016-09-23 08:43:56 -04:00
Tom Tromey
b381a388dc Update and install proc_service.h [BZ #20311]
This adds an include guard and __BEGIN/__END_DECLS to proc_service.h,
removes some extraneous "const"s, and then arranges to install the
header.  The idea here is to make it more convenient to implement the
proc_service.h API.
2016-08-03 16:26:32 +02:00
Joseph Myers
f7a9f785e5 Update copyright dates with scripts/update-copyrights. 2016-01-04 16:05:18 +00:00
Joseph Myers
9dd346ff43 Convert 113 more function definitions to prototype style (files with assertions).
This mostly automatically-generated patch converts 113 function
definitions in glibc from old-style K&R to prototype-style.  Following
my other recent such patches, this one deals with the case of function
definitions in files that either contain assertions or where grep
suggested they might contain assertions - and thus where it isn't
possible to use a simple object code comparison as a sanity check on
the correctness of the patch, because line numbers are changed.

A few such automatically-generated changes needed to be supplemented
by manual changes for the result to compile.  openat64 had a prototype
declaration with "..." but an old-style definition in
sysdeps/unix/sysv/linux/dl-openat64.c, and "..." needed adding to the
generated prototype in the definition (I've filed
<https://gcc.gnu.org/bugzilla/show_bug.cgi?id=68024> for diagnosing
such cases in GCC; the old state was undefined behavior not requiring
a diagnostic, but one seems a good idea).  In addition, as Florian has
noted regparm attribute mismatches between declaration and definition
are only diagnosed for prototype definitions, and five functions
needed internal_function added to their definitions (in the case of
__pthread_mutex_cond_lock, via the macro definition of
__pthread_mutex_lock) to compile on i386.

After this patch is in, remaining old-style definitions are probably
most readily fixed manually before we can turn on
-Wold-style-definition for all builds.

Tested for x86_64 and x86 (testsuite).

	* crypt/md5-crypt.c (__md5_crypt_r): Convert to prototype-style
	function definition.
	* crypt/sha256-crypt.c (__sha256_crypt_r): Likewise.
	* crypt/sha512-crypt.c (__sha512_crypt_r): Likewise.
	* debug/backtracesyms.c (__backtrace_symbols): Likewise.
	* elf/dl-minimal.c (_itoa): Likewise.
	* hurd/hurdmalloc.c (malloc): Likewise.
	(free): Likewise.
	(realloc): Likewise.
	* inet/inet6_option.c (inet6_option_space): Likewise.
	(inet6_option_init): Likewise.
	(inet6_option_append): Likewise.
	(inet6_option_alloc): Likewise.
	(inet6_option_next): Likewise.
	(inet6_option_find): Likewise.
	* io/ftw.c (FTW_NAME): Likewise.
	(NFTW_NAME): Likewise.
	(NFTW_NEW_NAME): Likewise.
	(NFTW_OLD_NAME): Likewise.
	* libio/iofwide.c (_IO_fwide): Likewise.
	* libio/strops.c (_IO_str_init_static_internal): Likewise.
	(_IO_str_init_static): Likewise.
	(_IO_str_init_readonly): Likewise.
	(_IO_str_overflow): Likewise.
	(_IO_str_underflow): Likewise.
	(_IO_str_count): Likewise.
	(_IO_str_seekoff): Likewise.
	(_IO_str_pbackfail): Likewise.
	(_IO_str_finish): Likewise.
	* libio/wstrops.c (_IO_wstr_init_static): Likewise.
	(_IO_wstr_overflow): Likewise.
	(_IO_wstr_underflow): Likewise.
	(_IO_wstr_count): Likewise.
	(_IO_wstr_seekoff): Likewise.
	(_IO_wstr_pbackfail): Likewise.
	(_IO_wstr_finish): Likewise.
	* locale/programs/localedef.c (normalize_codeset): Likewise.
	* locale/programs/locarchive.c (add_locale_to_archive): Likewise.
	(add_locales_to_archive): Likewise.
	(delete_locales_from_archive): Likewise.
	* malloc/malloc.c (__libc_mallinfo): Likewise.
	* math/gen-auto-libm-tests.c (init_fp_formats): Likewise.
	* misc/tsearch.c (__tfind): Likewise.
	* nptl/pthread_attr_destroy.c (__pthread_attr_destroy): Likewise.
	* nptl/pthread_attr_getdetachstate.c
	(__pthread_attr_getdetachstate): Likewise.
	* nptl/pthread_attr_getguardsize.c (pthread_attr_getguardsize):
	Likewise.
	* nptl/pthread_attr_getinheritsched.c
	(__pthread_attr_getinheritsched): Likewise.
	* nptl/pthread_attr_getschedparam.c
	(__pthread_attr_getschedparam): Likewise.
	* nptl/pthread_attr_getschedpolicy.c
	(__pthread_attr_getschedpolicy): Likewise.
	* nptl/pthread_attr_getscope.c (__pthread_attr_getscope):
	Likewise.
	* nptl/pthread_attr_getstack.c (__pthread_attr_getstack):
	Likewise.
	* nptl/pthread_attr_getstackaddr.c (__pthread_attr_getstackaddr):
	Likewise.
	* nptl/pthread_attr_getstacksize.c (__pthread_attr_getstacksize):
	Likewise.
	* nptl/pthread_attr_init.c (__pthread_attr_init_2_1): Likewise.
	(__pthread_attr_init_2_0): Likewise.
	* nptl/pthread_attr_setdetachstate.c
	(__pthread_attr_setdetachstate): Likewise.
	* nptl/pthread_attr_setguardsize.c (pthread_attr_setguardsize):
	Likewise.
	* nptl/pthread_attr_setinheritsched.c
	(__pthread_attr_setinheritsched): Likewise.
	* nptl/pthread_attr_setschedparam.c
	(__pthread_attr_setschedparam): Likewise.
	* nptl/pthread_attr_setschedpolicy.c
	(__pthread_attr_setschedpolicy): Likewise.
	* nptl/pthread_attr_setscope.c (__pthread_attr_setscope):
	Likewise.
	* nptl/pthread_attr_setstack.c (__pthread_attr_setstack):
	Likewise.
	* nptl/pthread_attr_setstackaddr.c (__pthread_attr_setstackaddr):
	Likewise.
	* nptl/pthread_attr_setstacksize.c (__pthread_attr_setstacksize):
	Likewise.
	* nptl/pthread_condattr_setclock.c (pthread_condattr_setclock):
	Likewise.
	* nptl/pthread_create.c (__find_in_stack_list): Likewise.
	* nptl/pthread_getattr_np.c (pthread_getattr_np): Likewise.
	* nptl/pthread_mutex_cond_lock.c (__pthread_mutex_lock): Define to
	use internal_function.
	* nptl/pthread_mutex_init.c (__pthread_mutex_init): Convert to
	prototype-style function definition.
	* nptl/pthread_mutex_lock.c (__pthread_mutex_lock): Likewise.
	(__pthread_mutex_cond_lock_adjust): Likewise.  Use
	internal_function.
	* nptl/pthread_mutex_timedlock.c (pthread_mutex_timedlock):
	Convert to prototype-style function definition.
	* nptl/pthread_mutex_trylock.c (__pthread_mutex_trylock):
	Likewise.
	* nptl/pthread_mutex_unlock.c (__pthread_mutex_unlock_usercnt):
	Likewise.
	(__pthread_mutex_unlock): Likewise.
	* nptl_db/td_ta_clear_event.c (td_ta_clear_event): Likewise.
	* nptl_db/td_ta_set_event.c (td_ta_set_event): Likewise.
	* nptl_db/td_thr_clear_event.c (td_thr_clear_event): Likewise.
	* nptl_db/td_thr_event_enable.c (td_thr_event_enable): Likewise.
	* nptl_db/td_thr_set_event.c (td_thr_set_event): Likewise.
	* nss/makedb.c (process_input): Likewise.
	* posix/fnmatch.c (__strchrnul): Likewise.
	(__wcschrnul): Likewise.
	(fnmatch): Likewise.
	* posix/fnmatch_loop.c (FCT): Likewise.
	* posix/glob.c (globfree): Likewise.
	(__glob_pattern_type): Likewise.
	(__glob_pattern_p): Likewise.
	* posix/regcomp.c (re_compile_pattern): Likewise.
	(re_set_syntax): Likewise.
	(re_compile_fastmap): Likewise.
	(regcomp): Likewise.
	(regerror): Likewise.
	(regfree): Likewise.
	* posix/regexec.c (regexec): Likewise.
	(re_match): Likewise.
	(re_search): Likewise.
	(re_match_2): Likewise.
	(re_search_2): Likewise.
	(re_search_stub): Likewise.  Use internal_function
	(re_copy_regs): Likewise.
	(re_set_registers): Convert to prototype-style function
	definition.
	(prune_impossible_nodes): Likewise.  Use internal_function.
	* resolv/inet_net_pton.c (inet_net_pton): Convert to
	prototype-style function definition.
	(inet_net_pton_ipv4): Likewise.
	* stdlib/strtod_l.c (____STRTOF_INTERNAL): Likewise.
	* sysdeps/pthread/aio_cancel.c (aio_cancel): Likewise.
	* sysdeps/pthread/aio_suspend.c (aio_suspend): Likewise.
	* sysdeps/pthread/timer_delete.c (timer_delete): Likewise.
	* sysdeps/unix/sysv/linux/dl-openat64.c (openat64): Likewise.
	Make variadic.
	* time/strptime_l.c (localtime_r): Convert to prototype-style
	function definition.
	* wcsmbs/mbsnrtowcs.c (__mbsnrtowcs): Likewise.
	* wcsmbs/mbsrtowcs_l.c (__mbsrtowcs_l): Likewise.
	* wcsmbs/wcsnrtombs.c (__wcsnrtombs): Likewise.
	* wcsmbs/wcsrtombs.c (__wcsrtombs): Likewise.
2015-10-20 11:54:09 +00:00
Alexandre Oliva
f8aeae3473 Fix DTV race, assert, DTV_SURPLUS Static TLS limit, and nptl_db garbage
for  ChangeLog

	[BZ #17090]
	[BZ #17620]
	[BZ #17621]
	[BZ #17628]
	* NEWS: Update.
	* elf/dl-tls.c (_dl_update_slotinfo): Clean up outdated DTV
	entries with Static TLS too.  Skip entries past the end of the
	allocated DTV, from Alan Modra.
	(tls_get_addr_tail): Update to glibc_likely/unlikely.  Move
	Static TLS DTV entry set up from...
	 (_dl_allocate_tls_init): ... here (fix modid assertion), ...
	* elf/dl-reloc.c (_dl_nothread_init_static_tls): ... here...
	* nptl/allocatestack.c (init_one_static_tls): ... and here...
	* elf/dlopen.c (dl_open_worker): Drop l_tls_modid upper bound
	for Static TLS.
	* elf/tlsdeschtab.h (map_generation): Return size_t.  Check
	that the slot we find is associated with the given map before
	using its generation count.
	* nptl_db/db_info.c: Include ldsodefs.h.
	(rtld_global, dtv_slotinfo_list, dtv_slotinfo): New typedefs.
	* nptl_db/structs.def (DB_RTLD_VARIABLE): New macro.
	(DB_MAIN_VARIABLE, DB_RTLD_GLOBAL_FIELD): Likewise.
	(link_map::l_tls_offset): New struct field.
	(dtv_t::counter): Likewise.
	(rtld_global): New struct.
	(_rtld_global): New rtld variable.
	(dl_tls_dtv_slotinfo_list): New rtld global field.
	(dtv_slotinfo_list): New struct.
	(dtv_slotinfo): Likewise.
	* nptl_db/td_symbol_list.c: Drop gnu/lib-names.h include.
	(td_lookup): Rename to...
	(td_mod_lookup): ... this.  Use new mod parameter instead of
	LIBPTHREAD_SO.
	* nptl_db/td_thr_tlsbase.c: Include link.h.
	(dtv_slotinfo_list, dtv_slotinfo): New functions.
	(td_thr_tlsbase): Check DTV generation.  Compute Static TLS
	addresses even if the DTV is out of date or missing them.
	* nptl_db/fetch-value.c (_td_locate_field): Do not refuse to
	index zero-length arrays.
	* nptl_db/thread_dbP.h: Include gnu/lib-names.h.
	(td_lookup): Make it a macro implemented in terms of...
	(td_mod_lookup): ... this declaration.
	* nptl_db/db-symbols.awk (DB_RTLD_VARIABLE): Override.
	(DB_MAIN_VARIABLE): Likewise.
2015-03-17 00:31:49 -03:00
Adhemerval Zanella
5ca10a0c9a powerpc: Remove HAVE_ASM_GLOBAL_DOT_NAME define
With AIX port deprecated there is no need to check/define
HAVE_ASM_GLOBAL_DOT_NAME anymore since the current minimum binutils
supported (2.22) does not emit global symbol with dot.

This patch removes all the HAVE_ASM_GLOBAL_DOT_NAME definition and
checks for powerpc64 port.
2015-03-11 09:01:05 -04:00
Roland McGrath
9287adf089 Add stub sys/procfs.h file 2015-01-08 13:24:56 -08:00
Joseph Myers
b168057aaa Update copyright dates with scripts/update-copyrights. 2015-01-02 16:29:47 +00:00
Siddhesh Poyarekar
ce9f10f7f0 Remove IS_IN_libpthread
Replace with IS_IN (libpthread).  Generated code unchanged on
x86_64.

	* nptl/lowlevellock.c: Use IS_IN instead of IS_IN_libpthread.
	* nptl/pthreadP.h: Likewise.
	* nptl_db/structs.def: Likewise.
	* sysdeps/arm/sysdep.h: Likewise.
	* sysdeps/nptl/bits/libc-lock.h: Likewise.
	* sysdeps/nptl/bits/libc-lockP.h: Likewise.
	* sysdeps/sparc/sparc32/lowlevellock.c: Likewise.
	* sysdeps/unix/alpha/sysdep.h: Likewise.
	* sysdeps/unix/sysv/linux/aarch64/sysdep-cancel.h: Likewise.
	* sysdeps/unix/sysv/linux/aarch64/sysdep.h: Likewise.
	* sysdeps/unix/sysv/linux/alpha/sysdep-cancel.h: Likewise.
	* sysdeps/unix/sysv/linux/arm/sysdep-cancel.h: Likewise.
	* sysdeps/unix/sysv/linux/hppa/nptl/sysdep-cancel.h: Likewise.
	* sysdeps/unix/sysv/linux/i386/sysdep-cancel.h: Likewise.
	* sysdeps/unix/sysv/linux/i386/sysdep.h: Likewise.
	* sysdeps/unix/sysv/linux/ia64/sysdep-cancel.h: Likewise.
	* sysdeps/unix/sysv/linux/ia64/sysdep.h: Likewise.
	* sysdeps/unix/sysv/linux/m68k/sysdep-cancel.h: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/sysdep-cancel.h: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/sysdep-cancel.h: Likewise.
	* sysdeps/unix/sysv/linux/mips/sysdep-cancel.h: Likewise.
	* sysdeps/unix/sysv/linux/not-cancel.h: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/sysdep-cancel.h: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/sysdep-cancel.h: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/sysdep-cancel.h: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/sysdep-cancel.h: Likewise.
	* sysdeps/unix/sysv/linux/sh/sysdep-cancel.h: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/sysdep-cancel.h: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/sysdep-cancel.h: Likewise.
	* sysdeps/unix/sysv/linux/tile/sysdep-cancel.h: Likewise.
	* sysdeps/unix/sysv/linux/tile/sysdep.h: Likewise.
	* sysdeps/unix/sysv/linux/tile/waitpid.S: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/cancellation.S: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/sysdep-cancel.h: Likewise.
2014-11-24 11:41:46 +05:30
Joseph Myers
ba90e05052 Remove configuration name patterns from shlib-versions.
This patch removes the first column (patterns matching configuration
names) from shlib-versions, leaving shlib-versions entry selection
based purely on sysdeps directories.

An implication of this removal is that the default for any non-Linux
ports using NPTL will be the same SONAMEs for NPTL libraries as for
Linux (as those defaults, previously limited to .*-.*-linux.*, are
left in nptl/shlib-versions and nptl_db/shlib-versions).

Special host_os handling in configure.ac that was purely for
shlib-versions is removed.  (The host_os setting is still used for
libc-abis - see
<https://sourceware.org/ml/libc-alpha/2014-01/msg00375.html> regarding
that - but no entries there are affected by this change.)

Tested on x86_64 and x86 that the installed shared libraries are
unchanged by this patch.

	* scripts/soversions.awk: Do not handle configuration names.
	* Makeconfig ($(common-objpfx)soversions.i): Do not pass cpu,
	vendor and os variables to soversions.awk.
	* configure.ac: Do not modify gnu-* host_os.
	* configure: Regenerated
	* shlib-versions: Remove first column with configuration names.
	* nptl/shlib-versions: Likewise.
	* nptl_db/shlib-versions: Likewise.
	* sysdeps/hppa/shlib-versions: Likewise.
	* sysdeps/m68k/shlib-versions: Likewise.
	* sysdeps/mach/hurd/shlib-versions: Likewise.
	* sysdeps/unix/sysv/linux/aarch64/shlib-versions: Likewise.
	* sysdeps/unix/sysv/linux/alpha/shlib-versions: Likewise.
	* sysdeps/unix/sysv/linux/arm/shlib-versions: Likewise.
	* sysdeps/unix/sysv/linux/hppa/shlib-versions: Likewise.
	* sysdeps/unix/sysv/linux/ia64/shlib-versions: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/shlib-versions: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/shlib-versions: Likewise.
	* sysdeps/unix/sysv/linux/mips/shlib-versions: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/shlib-versions:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/shlib-versions: Likewise.
	* sysdeps/unix/sysv/linux/sh/shlib-versions: Likewise.
	* sysdeps/unix/sysv/linux/shlib-versions: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/shlib-versions: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/shlib-versions: Likewise.
	* sysdeps/unix/sysv/linux/tile/shlib-versions: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/shlib-versions: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/shlib-versions: Likewise.

libidn/ChangeLog:
	* shlib-versions: Remove first column with configuration names.
2014-09-12 12:28:47 +00:00
Joseph Myers
f214606a0e Enumerate tests with special rules in tests-special variable.
This patch is a revised and updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>.

In order to generate overall summaries of the results of all tests in
the glibc testsuite, we need to identify and concatenate the files
with the results of individual tests.

Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this.
However, the normal glibc approach is explicit enumeration of the
expected set of files with a given property, rather than all files
matching some pattern like that.  Furthermore, we would like to be
able to mark tests as UNRESOLVED if the file with their results is for
some reason missing, and in future we would like to be able to mark
tests as UNSUPPORTED if they are disabled for a particular
configuration (rather than simply having them missing from the list of
tests as at present).  Such handling of tests that were not run or did
not record results requires an explicit enumeration of tests.

For the tests following the default makefile rules, $(tests) (and
$(xtests)) provides such an enumeration.  Others, however, are added
directly as dependencies of the "tests" and "xtests" makefile
targets.  This patch changes the makefiles to put them in variables
tests-special and xtests-special, with appropriate dependencies on the
tests listed there then being added centrally.

Those variables are used in Rules and so need to be set before Rules
is included in a subdirectory makefile, which is often earlier in the
makefile than the dependencies were present before.  We previously
discussed the question of where to include Rules; see the question at
<https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a
discussion in
<https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why
Rules is included early rather than late in subdirectory makefiles.

It was necessary to avoid an indirection through the check-abi target
and get the check-abi-* targets for individual libraries into the
tests-special variable.  The intl/ test $(objpfx)tst-gettext.out,
previously built only because of dependencies from other tests, was
also added to tests-special for the same reason.

The entries in tests-special are the full makefile targets, complete
with $(objpfx) and .out.  If a future change causes tests to be named
consistently with a .out suffix, this can be changed to include just
the path relative to $(objpfx), without .out.

Tested x86_64, including that the same set of files is generated in
the build directory by a build and testsuite run both before and after
the patch (except for changes to the
elf/tst-null-argv.debug.out.<number> file name), and a build with
run-built-tests=no to verify there aren't any more obvious instances
of the issue Marcus Shawcroft reported with a previous version in
<https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>.

	* Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	(tests): Depend on $(tests-special).
	* Makerules (check-abi-list): New variable.
	(check-abi): Depend on $(check-abi-list).
	[$(subdir) = elf] (tests-special): Add
	$(objpfx)check-abi-libc.out.
	[$(build-shared) = yes && subdir] (tests-special): Add
	$(check-abi-list).
	[$(build-shared) = yes && subdir] (tests): Do not depend on
	check-abi.
	* Rules (tests): Depend on $(tests-special).
	(xtests): Depend on $(xtests-special).
	* catgets/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* conform/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* elf/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* grp/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* iconv/Makefile (xtests): Change dependencies to ....
	(xtests-special): ... additions to this variable.
	* iconvdata/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* intl/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.  Also add
	$(objpfx)tst-gettext.out.
	* io/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* libio/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* malloc/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* misc/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* nptl/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* nptl_db/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* posix/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	(xtests): Change dependencies to ....
	(xtests-special): ... additions to this variable.
	* resolv/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	(xtests): Change dependencies to ....
	(xtests-special): ... additions to this variable.
	* stdio-common/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	(do-tst-unbputc): Remove target.
	(do-tst-printf): Likewise.
	* stdlib/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* string/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* sysdeps/x86/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.

localedata:
	* Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
2014-03-06 22:35:33 +00:00
Roland McGrath
116f4d1ad6 Retire the separate ChangeLog files in nptl/ and nptl_db/ subdirs. 2014-03-03 15:30:42 -08:00
Joseph Myers
a5f891ac8d Consistently include Makeconfig after defining subdir.
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I
noted it was necessary to add includes of Makeconfig early in various
subdirectory makefiles for the tests-special variable settings added
by that patch to be conditional on configuration information.  No-one
commented on the general question there of whether Makeconfig should
always be included immediately after the definition of subdir.

This patch implements that early inclusion of Makeconfig in each
directory (which is a lot easier than consistent placement of includes
of Rules).  Includes are added if needed, or moved up if already
present.  Subdirectory "all:" targets are removed, since Makeconfig
provides one.

There is potential for further cleanups I haven't done.  Rules and
Makerules have code such as

ifneq   "$(findstring env,$(origin headers))" ""
headers :=
endif

to override to empty any value of various variables that came from the
environment.  I think there is a case for Makeconfig setting all the
subdirectory variables (other than subdir) to empty to ensure no
outside value is going to take effect if a subdirectory fails to
define a variable.  (A list of such variables, possibly out of date
and incomplete, is in manual/maint.texi.)  Rules and Makerules would
give errors if Makeconfig hadn't already been included, instead of
including it themselves.  The special code to override values coming
from the environment would then be obsolete and could be removed.

Tested x86_64, including that installed binaries are identical before
and after the patch.

	* argp/Makefile: Include Makeconfig immediately after defining
	subdir.
	* assert/Makefile: Likewise.
	* benchtests/Makefile: Likewise.
	* catgets/Makefile: Likewise.
	* conform/Makefile: Likewise.
	* crypt/Makefile: Likewise.
	* csu/Makefile: Likewise.
	(all): Remove target.
	* ctype/Makefile: Include Makeconfig immediately after defining
	subdir.
	* debug/Makefile: Likewise.
	* dirent/Makefile: Likewise.
	* dlfcn/Makefile: Likewise.
	* gmon/Makefile: Likewise.
	* gnulib/Makefile: Likewise.
	* grp/Makefile: Likewise.
	* gshadow/Makefile: Likewise.
	* hesiod/Makefile: Likewise.
	* hurd/Makefile: Likewise.
	(all): Remove target.
	* iconvdata/Makefile: Include Makeconfig immediately after
	defining subdir.
	* inet/Makefile: Likewise.
	* intl/Makefile: Likewise.
	* io/Makefile: Likewise.
	* libio/Makefile: Likewise.
	(all): Remove target.
	* locale/Makefile: Include Makeconfig immediately after defining
	subdir.
	* login/Makefile: Likewise.
	* mach/Makefile: Likewise.
	(all): Remove target.
	* malloc/Makefile: Include Makeconfig immediately after defining
	subdir.
	(all): Remove target.
	* manual/Makefile: Include Makeconfig immediately after defining
	subdir.
	* math/Makefile: Likewise.
	* misc/Makefile: Likewise.
	* nis/Makefile: Likewise.
	* nss/Makefile: Likewise.
	* po/Makefile: Likewise.
	(all): Remove target.
	* posix/Makefile: Include Makeconfig immediately after defining
	subdir.
	* pwd/Makefile: Likewise.
	* resolv/Makefile: Likewise.
	* resource/Makefile: Likewise.
	* rt/Makefile: Likewise.
	* setjmp/Makefile: Likewise.
	* shadow/Makefile: Likewise.
	* signal/Makefile: Likewise.
	* socket/Makefile: Likewise.
	* soft-fp/Makefile: Likewise.
	* stdio-common/Makefile: Likewise.
	* stdlib/Makefile: Likewise.
	* streams/Makefile: Likewise.
	* string/Makefile: Likewise.
	* sunrpc/Makefile: Likewise.
	(all): Remove target.
	* sysvipc/Makefile: Include Makeconfig immediately after defining
	subdir.
	* termios/Makefile: Likewise.
	* time/Makefile: Likewise.
	* timezone/Makefile: Likewise.
	(all): Remove target.
	* wcsmbs/Makefile: Include Makeconfig immediately after defining
	subdir.
	* wctype/Makefile: Likewise.

libidn/ChangeLog:
	* Makefile: Include Makeconfig immediately after defining subdir.

localedata/ChangeLog:
	* Makefile: Include Makeconfig immediately after defining subdir.
	(all): Remove target.

nptl/ChangeLog:
	* Makefile: Include Makeconfig immediately after defining subdir.

nptl_db/ChangeLog:
	* Makefile: Include Makeconfig immediately after defining subdir.
2014-02-26 23:12:03 +00:00