Fix the subscript on air->family, which was accidentally set to COUNT
when it should have remained as I.
Resolves: BZ #29605
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Rename atomic_exchange_rel/acq to use atomic_exchange_release/acquire
since these map to the standard C11 atomic builtins.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Replace atomic_decrement_and_test with atomic_fetch_add_relaxed.
These are simple counters which do not protect any shared data from
concurrent accesses. Also remove the unused file cond-perf.c.
Passes regress on AArch64.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Replace atomic_increment and atomic_increment_val with atomic_fetch_add_relaxed.
One case in sem_post.c uses release semantics (see comment above it).
The others are simple counters and do not protect any shared data from
concurrent accesses.
Passes regress on AArch64.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
We don't need RV32 specific floating point functions, instead make them
generic for RISC-V.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Both RV32 and RV64 should have the same libm-test-ulps, so consolidate
them into a single file.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
QEMU does not support support set_robust_list. Thus, we need
to enable detection of set_robust_list system call.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
It avoid a possible compiler warning where right size of operator
is converted from a negative value to unsigned.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
A new internal definition, __LIBC_LOCK_ALIGNMENT, is used to force
the 4-byte alignment only for m68k, other architecture keep the
natural alignment of the type used internally (and hppa does not
require 16-byte alignment for kernel-assisted CAS).
Reviewed-by: Florian Weimer <fweimer@redhat.com>
POSIX does not say this value is special. For example, old XFS file
systems may still use inode number zero.
Also update the comment regarding ENOENT. Linux may return ENOENT
for some file systems.
Non-at functions can be implemented by just calling the corresponding at
function with AT_FDCWD and zero at_flags.
In the linkat case, the at behavior is different (O_NOLINK), so this introduces
__linkat_common to pass O_NOLINK as appropriate.
lstat functions can also be implemented with fstatat by adding
__fstatat64_common which takes a flags parameter in addition to the at_flags
parameter,
In the end this factorizes chmod, chown, link, lstat64, mkdir, readlink,
rename, stat64, symlink, unlink, utimes.
This also makes __lstat, __lxstat64, __stat and __xstat64 directly use
__fstatat64_common instead of __lstat64 or __stat64.
__syscall_error may end up farther than 1MiB away from a caller,
especially when linking statically large binaries. tail allows for
4GiB jumps and is reduced to j when a linked symbol is within range.
Fixes: 36960f0c76 ("RISC-V: Linux Syscall Interface")
Fixes: 7f33b09c65 ("RISC-V: Linux ABI")
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
9e5c991106 ("hurd: Fix readlink() hanging on fifo") separated opening
the file for the stat call from opening the file for the read call. That
however opened a small window for the file to change. Better make this
atomic by reopening the file with O_READ.
readlink() opens the target with O_READ to be able to read the symlink
content. When the target is actually a fifo, that would hang waiting for a
writer (caught in the coreutils testsuite). We thus have to first lookup the
target without O_READ to perform io_stat and lookout for fifos, and only
after checking the symlink type, we can re-lookup with O_READ.
Replace the 3 uses of atomic_bit_set and atomic_bit_test_set with
atomic_fetch_or_relaxed. Using relaxed MO is correct since the
atomics are used to ensure memory is released only once.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Some architectures (mips, powerpc and sparc) define separate values for
EDEADLOCK and EDEADLK. Readd the errlist entry for EDEADLOCK for those
configurations. Also use the dependency files from generating the
auxiliary errlist and siglist files.
C2x makes static_assert and thread_local into keywords, removing the
definitions as macros in assert.h and threads.h. Thus, disable those
macros in those glibc headers for C2x.
The disabling is done based on a combination of language version and
__GNUC_PREREQ, *not* based on __GLIBC_USE (ISOC2X), on the principle
that users of the header (when requesting C11 or later APIs - not
assert.h for C99 and older API versions) should always have the names
static_assert or thread_local available after inclusion of the header,
whether as a keyword or as a macro. Thus, when using a compiler
without the keywords (whether an older compiler, possibly in C2x mode,
or _GNU_SOURCE with any compiler but in an older language mode, for
example) the macros should be defined, even when C2x APIs have been
requested. The __GNUC_PREREQ conditionals here may well need updating
with the versions of other compilers that gained support for these
keywords in C2x mode.
Tested for x86_64.
Not all compilers support the inline asm prefix '%v' to emit the avx
instruction if AVX is enable. Use a prefix instead.
Checked on x86_64-linux-gnu and i686-linux-gnu.
It avoids the possible warning of uninitialized 'frame' variable when
building with clang:
../sysdeps/nptl/jmp-unwind.c:27:42: error: variable 'frame' is
uninitialized when used here [-Werror,-Wuninitialized]
__pthread_cleanup_upto (env->__jmpbuf, CURRENT_STACK_FRAME);
The resulting code is similar to CURRENT_STACK_FRAME.
Checked on x86_64-linux-gnu.
On s390x syscalls are triggered by svc instruction. One can
pass the syscall number encoded in the instruction "svc 123"
or by storing it in r1:
lghi r1,123
svc 0
If the syscall number is encoded in the instruction, this can
cause broken syscall restarts. Therefore this patch is now just
passing the syscall number in r1.
See also kernel-commit:
"s390/signal: switch to using vdso for sigreturn and syscall restart"
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/arch/s390/[%e2%80%a6]call.c?h=v6.0-rc1&id=df29a7440c4b5c65765c8f60396b3b13063e24e9
As information, the "svc 0" feature was introduced in kernel 2.5.62:
commit b5aad611393ef2e132e3648fa4c6e56a9cfa8708
GCC 13 compiles these built-ins to {fmax,fmin}.{s/d} instruction, use
them instead of the generic implementation.
Link: https://gcc.gnu.org/r13-2085
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
We should default to the larger code model, in order to support
larger applications built with -static -pie. This should be
consistent with pic-ccflag, which defaults to -fPIC.
Remove the now redundant override from sysdeps/sparc/Makefile.
Note that -fno-pie and -fno-PIE have the same effect.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
In gnumach, 3e1702a65fb3 ("add rpc_versions for vm types") changed the type
of vm_size_t, making it always a unsigned long. This made it incompatible on
x86 with size_t. Even if we may want to revert it to unsigned int, it's
better to fix the types of parameters according to the .defs files.
posix advises to have strerror_r fill a message even when we are returning
an error.
This makes mach's xpg_strerror_r do this, like the generic version does.
Spotted by the libunistring testsuite test-strerror_r
08d2024b41 ("string: Simplify strerror_r") inadvertently made
__strerror_r print unknown error system in decimal while the original
code was printing it in hexadecimal. perror was kept printing in
hexadecimal in 725eeb4af1 ("string: Use tls-internal on strerror_l"),
let us keep both coherent.
This also fixes a duplicate ':'
Spotted by the libunistring testsuite test-perror2
The start code can get linked into dynamic linked executables where
LGPL would require shipping the source or linkable binaries when the
executable is distributed.
On some targets the license exception was missing in start.S (which
is compiled into crt1.o and Scrt1.o which may end up linked into PDE
and PIE binaries).
I did not review what other code may end up in executables, just
fixed the start.S license inconsistency across targets.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Changes to these arrays are often backported to stable releases,
but additions to these arrays shift the offsets of the following
_rltd_global_ro members, thus breaking the GLIBC_PRIVATE ABI.
Obviously, this change is itself an internal ABI break, but at least
it will avoid further ABI breaks going forward.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This reverts commit 6f85dbf102.
Once this change hits the release branches, it will require relinking
of all statically linked applications before static dlopen works
again, for the majority of updates on release branches: The NEWS file
is regularly updated with bug references, so the __libc_early_init
suffix changes, and static dlopen cannot find the function anymore.
While this ABI check is still technically correct (we do require
rebuilding & relinking after glibc updates to keep static dlopen
working), it is too drastic for stable release branches.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The files NEWS, include/link.h, and sysdeps/generic/ldsodefs.h
contribute to the version fingerprint used for detection. The
fingerprint can be further refined using the --with-extra-version-id
configure argument.
_dl_call_libc_early_init is replaced with _dl_lookup_libc_early_init.
The new function is used store a pointer to libc.so's
__libc_early_init function in the libc_map_early_init member of the
ld.so namespace structure. This function pointer can then be called
directly, so the separate invocation function is no longer needed.
The versioned symbol lookup needs the symbol versioning data
structures, so the initialization of libc_map and libc_map_early_init
is now done from _dl_check_map_versions, after this information
becomes available. (_dl_map_object_from_fd does not set this up
in time, so the initialization code had to be moved from there.)
This means that the separate initialization code can be removed from
dl_main because _dl_check_map_versions covers all maps, including
the initial executable loaded by the kernel. The lookup still happens
before relocation and the invocation of IFUNC resolvers, so IFUNC
resolvers are protected from ABI mismatch.
The __libc_early_init function pointer is not protected because
so little code runs between the pointer write and the invocation
(only dynamic linker code and IFUNC resolvers).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* posix/getopt.c (_getopt_initialize):
* sysdeps/posix/tempname.c (try_dir, try_nocreate):
Put _GL_UNUSED before args instead of after.
This makes no difference for glibc.
It is needed for Gnulib when being compiled on
non-GCC C23 compilers.
gcc introduces gs:0x14 accesses in most functions, so we need some tcbhead
to be ready very early during initialization. This configures a static area
which can be referenced by various protected functions, until proper TLS is
set up.
Linux 5.19 adds more HWCAP2_* values for AArch64; add these to its
bits/hwcap.h header in glibc.
Tested with build-many-glibcs.py for aarch64-linux-gnu.
Linux 5.19 adds a new accounting flag AGROUP; add it to the
enumeration in sys/acct.h.
This shows up that the Alpha-specific variant of this header has a
different set of constants and struct acct, which appear to be the
constants and structure layout from Linux 2.0. These were changed
some time between Linux 2.0 and Linux 2.2; I see no evidence of an
Alpha-specific layout or set of constants, but haven't checked the
detailed Linux kernel history between those versions. Rather, it
looks like tha Alpha-specific header was originally needed because of
the use of types in the kernel structure (such as uid_t and gid_t)
that had different sizes on Alpha, and when glibc was updated for
changes to the structure and constants in the kernel
1998-10-02 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* sysdeps/unix/sysv/linux/sys/acct.h: Bring in sync with current
linux 2.1 version.
that simply omitted to do anything about the Alpha version.
Thus, remove the Alpha version in order to get the updated definitions
into use on Alpha, as I don't think the interfaces are actually
different for Alpha with any kernel version supported by glibc.
Tested for x86_64, and with build-many-glibcs.py for alpha-linux-gnu.
The kernel special-cases the zero argument for alpha brk, and we can
use that to restore the generic Linux error handling behavior.
Fixes commit b57ab258c1 ("Linux:
Introduce __brk_call for invoking the brk system call").
We do not have a hurd data block only when bootstrapping the system, in
which case we don't have a notion of suid yet anyway.
This is needed, otherwise init_standard_fds would check that standard
file descriptors are allocated, which is meaningless during bootstrap.
If the architecture level set is high enough, no IFUNCs are used at
all and the variable i would be unused. Then the build fails with:
../sysdeps/s390/multiarch/ifunc-impl-list.c: In function ‘__libc_ifunc_impl_list’:
../sysdeps/s390/multiarch/ifunc-impl-list.c:76:10: error: unused variable ‘i’ [-Werror=unused-variable]
76 | size_t i = max;
| ^
cc1: all warnings being treated as errors
math/test-float128-y1 fails on x86_64 and ppc64el with gcc 12 and -O3,
because code inside a block guarded by SET_RESTORE_ROUNDL is being moved
after the rounding mode has been restored. Use math_force_eval to
prevent this (and insert some math_opt_barrier calls to prevent code
from being moved before the rounding mode is set).
Fixes#29463
Reviewed-By: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
The #ifdef FSOPEN_CLOEXEC check did not work because the macro
was always defined in this header prior to the check, so that
the <linux/mount.h> contents did not matter.
Fixes commit 774058d729
("linux: Fix sys/mount.h usage with kernel headers").
I.e. from sysdeps/unix/sysv/linux/bits/in.h to netinet/in.h
It is following both the BSD and Linux definitions.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Now that kernel exports linux/mount.h and includes it on linux/fs.h,
its definitions might clash with glibc exports sys/mount.h. To avoid
the need to rearrange the Linux header to be always after glibc one,
the glibc sys/mount.h is changed to:
1. Undefine the macros also used as enum constants. This covers prior
inclusion of <linux/mount.h> (for instance MS_RDONLY).
2. Include <linux/mount.h> based on the usual __has_include check
(needs to use __has_include ("linux/mount.h") to paper over GCC
bugs.
3. Define enum fsconfig_command only if FSOPEN_CLOEXEC is not defined.
(FSOPEN_CLOEXEC should be a very close proxy.)
4. Define struct mount_attr if MOUNT_ATTR_SIZE_VER0 is not defined.
(Added in the same commit on the Linux side.)
This patch also adds some tests to check if including linux/fs.h and
linux/mount.h after and before sys/mount.h does work.
Checked on x86_64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Improve performance of recursive IO locks by adding a fast path for
the single-threaded case. To reduce the number of memory accesses for
locking/unlocking, only increment the recursion counter if the lock
is already taken.
On Neoverse V1, a microbenchmark with many small freads improved by
2.9x. Multithreaded performance improved by 2%.
Reviewed-by: Cristian Rodríguez <crrodriguez@opensuse.org>
So far this test checks if pidfd_open-syscall is supported,
which was introduced with linux 5.3.
The process_madvise-syscall was introduced with linux 5.10.
Thus you'll get FAILs if you are running a kernel in between.
This patch adds a check if the first process_madvise-syscall
returns ENOSYS and in this case will fail with UNSUPPORTED.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
`#ifndef STPCPY` is incorrect for checking if `STRCPY` is already
defined. It doesn't end up mattering as the whole check is
guarded by `#if IS_IN (libc)` but is incorrect none the less.
Similar to 6720d36b66 for x86-64.
Clang cannot assemble movzx in the AT&T dialect mode. Change movzx to
movzbl, which follows the AT&T dialect and is used elsewhere in the
file.
The older libc versions are obsolete for over twenty years now.
This patch removes the special flags for libc5 and libc4 and assumes
that all libraries cached are libc6 compatible and use FLAG_ELF_LIBC6.
Checked with a build for all affected architectures.
Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
exit only terminates the current thread, not the whole process, so it
is the wrong fallback system call in this context. All supported
Linux versions implement the exit_group system call anyway.
This patch updates the kernel version in the tests tst-mman-consts.py,
tst-mount-consts.py and tst-pidfd-consts.py to 5.18. (There are no
new constants covered by these tests in 5.19, or in 5.17 or 5.18 in
the case of tst-mount-consts.py that previously used version 5.16,
that need any other header changes.)
Tested with build-many-glibcs.py.
__pthread_sigmask cannot actually fail with valid pointer arguments
(it would need a really broken seccomp filter), and we do not check
for errors elsewhere.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Since commit ec2c1fcefb ("malloc:
Abort on heap corruption, without a backtrace [BZ #21754]"),
__libc_message always terminates the process. Since commit
a289ea09ea ("Do not print backtraces
on fatal glibc errors"), the backtrace facility has been removed.
Therefore, remove enum __libc_message_action and the action
argument of __libc_message, and mark __libc_message as _No_return.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Linux 5.19 has no new syscalls, but enables memfd_secret in the uapi
headers for RISC-V. Update the version number in syscall-names.list
to reflect that it is still current for 5.19 and regenerate the
arch-syscall.h headers with build-many-glibcs.py update-syscalls.
Tested with build-many-glibcs.py.
The inline and library functions that the CMSG_NXTHDR macro may expand
to increment the pointer to the header before checking the stride of
the increment against available space. Since C only allows incrementing
pointers to one past the end of an array, the increment must be done
after a length check. This commit fixes that and includes a regression
test for CMSG_FIRSTHDR and CMSG_NXTHDR.
The Linux, Hurd, and generic headers are all changed.
Tested on Linux on armv7hl, i686, x86_64, aarch64, ppc64le, and s390x.
[BZ #28846]
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
pidfd_getfd can fail for a valid pidfd with errno EPERM for various
reasons in a restricted environment. Use FAIL_UNSUPPORTED in that case.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Rather than buffering 16 MiB of entropy in userspace (by way of
chacha20), simply call getrandom() every time.
This approach is doubtlessly slower, for now, but trying to prematurely
optimize arc4random appears to be leading toward all sorts of nasty
properties and gotchas. Instead, this patch takes a much more
conservative approach. The interface is added as a basic loop wrapper
around getrandom(), and then later, the kernel and libc together can
work together on optimizing that.
This prevents numerous issues in which userspace is unaware of when it
really must throw away its buffer, since we avoid buffering all
together. Future improvements may include userspace learning more from
the kernel about when to do that, which might make these sorts of
chacha20-based optimizations more possible. The current heuristic of 16
MiB is meaningless garbage that doesn't correspond to anything the
kernel might know about. So for now, let's just do something
conservative that we know is correct and won't lead to cryptographic
issues for users of this function.
This patch might be considered along the lines of, "optimization is the
root of all evil," in that the much more complex implementation it
replaces moves too fast without considering security implications,
whereas the incremental approach done here is a much safer way of going
about things. Once this lands, we can take our time in optimizing this
properly using new interplay between the kernel and userspace.
getrandom(0) is used, since that's the one that ensures the bytes
returned are cryptographically secure. But on systems without it, we
fallback to using /dev/urandom. This is unfortunate because it means
opening a file descriptor, but there's not much of a choice. Secondly,
as part of the fallback, in order to get more or less the same
properties of getrandom(0), we poll on /dev/random, and if the poll
succeeds at least once, then we assume the RNG is initialized. This is a
rough approximation, as the ancient "non-blocking pool" initialized
after the "blocking pool", not before, and it may not port back to all
ancient kernels, though it does to all kernels supported by glibc
(≥3.2), so generally it's the best approximation we can do.
The motivation for including arc4random, in the first place, is to have
source-level compatibility with existing code. That means this patch
doesn't attempt to litigate the interface itself. It does, however,
choose a conservative approach for implementing it.
Cc: Adhemerval Zanella Netto <adhemerval.zanella@linaro.org>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Cristian Rodríguez <crrodriguez@opensuse.org>
Cc: Paul Eggert <eggert@cs.ucla.edu>
Cc: Mark Harris <mark.hsj@gmail.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Commit a06b40cdf5 updated stat.h to use
__USE_XOPEN2K8 instead of __USE_MISC to add the st_atim, st_mtim and
st_ctim members to struct stat. However, for microblaze, there are two
definitions of struct stat, depending on the __USE_FILE_OFFSET64 macro.
The second one was not updated.
Change __USE_MISC to __USE_XOPEN2K8 in the __USE_FILE_OFFSET64 version
of struct stat for microblaze.
The hppa port starts libc at GLIBC_2.2, but has earlier symbol
versions in other shared objects. This means that the compat
symbol for readdir64 is not actually present in libc even though
have-GLIBC_2.1.3 is defined as yes at the make level.
Fixes commit 15e50e6c96 ("Linux:
dirent/tst-readdir64-compat can be a regular test") by mostly
reverting it.
It adds vectorized ChaCha20 implementation based on libgcrypt
cipher/chacha20-amd64-avx2.S. It is used only if AVX2 is supported
and enabled by the architecture.
As for generic implementation, the last step that XOR with the
input is omited. The final state register clearing is also
omitted.
On a Ryzen 9 5900X it shows the following improvements (using
formatted bench-arc4random data):
SSE MB/s
-----------------------------------------------
arc4random [single-thread] 704.25
arc4random_buf(16) [single-thread] 1018.17
arc4random_buf(32) [single-thread] 1315.27
arc4random_buf(48) [single-thread] 1449.36
arc4random_buf(64) [single-thread] 1511.16
arc4random_buf(80) [single-thread] 1539.48
arc4random_buf(96) [single-thread] 1571.06
arc4random_buf(112) [single-thread] 1596.16
arc4random_buf(128) [single-thread] 1613.48
-----------------------------------------------
AVX2 MB/s
-----------------------------------------------
arc4random [single-thread] 922.61
arc4random_buf(16) [single-thread] 1478.70
arc4random_buf(32) [single-thread] 2241.80
arc4random_buf(48) [single-thread] 2681.28
arc4random_buf(64) [single-thread] 2913.43
arc4random_buf(80) [single-thread] 3009.73
arc4random_buf(96) [single-thread] 3141.16
arc4random_buf(112) [single-thread] 3254.46
arc4random_buf(128) [single-thread] 3305.02
-----------------------------------------------
Checked on x86_64-linux-gnu.
It adds vectorized ChaCha20 implementation based on libgcrypt
cipher/chacha20-amd64-ssse3.S. It replaces the ROTATE_SHUF_2 (which
uses pshufb) by ROTATE2 and thus making the original implementation
SSE2.
As for generic implementation, the last step that XOR with the
input is omited. The final state register clearing is also
omitted.
On a Ryzen 9 5900X it shows the following improvements (using
formatted bench-arc4random data):
GENERIC MB/s
-----------------------------------------------
arc4random [single-thread] 443.11
arc4random_buf(16) [single-thread] 552.27
arc4random_buf(32) [single-thread] 626.86
arc4random_buf(48) [single-thread] 649.81
arc4random_buf(64) [single-thread] 663.95
arc4random_buf(80) [single-thread] 674.78
arc4random_buf(96) [single-thread] 675.17
arc4random_buf(112) [single-thread] 680.69
arc4random_buf(128) [single-thread] 683.20
-----------------------------------------------
SSE MB/s
-----------------------------------------------
arc4random [single-thread] 704.25
arc4random_buf(16) [single-thread] 1018.17
arc4random_buf(32) [single-thread] 1315.27
arc4random_buf(48) [single-thread] 1449.36
arc4random_buf(64) [single-thread] 1511.16
arc4random_buf(80) [single-thread] 1539.48
arc4random_buf(96) [single-thread] 1571.06
arc4random_buf(112) [single-thread] 1596.16
arc4random_buf(128) [single-thread] 1613.48
-----------------------------------------------
Checked on x86_64-linux-gnu.
It adds vectorized ChaCha20 implementation based on libgcrypt
cipher/chacha20-aarch64.S. It is used as default and only
little-endian is supported (BE uses generic code).
As for generic implementation, the last step that XOR with the
input is omited. The final state register clearing is also
omitted.
On a virtualized Linux on Apple M1 it shows the following
improvements (using formatted bench-arc4random data):
GENERIC MB/s
-----------------------------------------------
arc4random [single-thread] 380.89
arc4random_buf(16) [single-thread] 500.73
arc4random_buf(32) [single-thread] 552.61
arc4random_buf(48) [single-thread] 566.82
arc4random_buf(64) [single-thread] 574.01
arc4random_buf(80) [single-thread] 581.02
arc4random_buf(96) [single-thread] 591.19
arc4random_buf(112) [single-thread] 592.29
arc4random_buf(128) [single-thread] 596.43
-----------------------------------------------
OPTIMIZED MB/s
-----------------------------------------------
arc4random [single-thread] 569.60
arc4random_buf(16) [single-thread] 825.78
arc4random_buf(32) [single-thread] 987.03
arc4random_buf(48) [single-thread] 1042.39
arc4random_buf(64) [single-thread] 1075.50
arc4random_buf(80) [single-thread] 1094.68
arc4random_buf(96) [single-thread] 1130.16
arc4random_buf(112) [single-thread] 1129.58
arc4random_buf(128) [single-thread] 1137.91
-----------------------------------------------
Checked on aarch64-linux-gnu.
The implementation is based on scalar Chacha20 with per-thread cache.
It uses getrandom or /dev/urandom as fallback to get the initial entropy,
and reseeds the internal state on every 16MB of consumed buffer.
To improve performance and lower memory consumption the per-thread cache
is allocated lazily on first arc4random functions call, and if the
memory allocation fails getentropy or /dev/urandom is used as fallback.
The cache is also cleared on thread exit iff it was initialized (so if
arc4random is not called it is not touched).
Although it is lock-free, arc4random is still not async-signal-safe
(the per thread state is not updated atomically).
The ChaCha20 implementation is based on RFC8439 [1], omitting the final
XOR of the keystream with the plaintext because the plaintext is a
stream of zeros. This strategy is similar to what OpenBSD arc4random
does.
The arc4random_uniform is based on previous work by Florian Weimer,
where the algorithm is based on Jérémie Lumbroso paper Optimal Discrete
Uniform Generation from Coin Flips, and Applications (2013) [2], who
credits Donald E. Knuth and Andrew C. Yao, The complexity of nonuniform
random number generation (1976), for solving the general case.
The main advantage of this method is the that the unit of randomness is not
the uniform random variable (uint32_t), but a random bit. It optimizes the
internal buffer sampling by initially consuming a 32-bit random variable
and then sampling byte per byte. Depending of the upper bound requested,
it might lead to better CPU utilization.
Checked on x86_64-linux-gnu, aarch64-linux, and powerpc64le-linux-gnu.
Co-authored-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Yann Droneaud <ydroneaud@opteya.com>
[1] https://datatracker.ietf.org/doc/html/rfc8439
[2] https://arxiv.org/pdf/1304.1916.pdf
Before this the test fails if run in a chroot by a non-root user:
warning: could not become root outside namespace (Operation not permitted)
../sysdeps/unix/sysv/linux/tst-mount.c:36: numeric comparison failure
left: 1 (0x1); from: errno
right: 19 (0x13); from: ENODEV
error: ../sysdeps/unix/sysv/linux/tst-mount.c:39: not true: fd != -1
error: ../sysdeps/unix/sysv/linux/tst-mount.c:46: not true: r != -1
error: ../sysdeps/unix/sysv/linux/tst-mount.c:48: not true: r != -1
../sysdeps/unix/sysv/linux/tst-mount.c:52: numeric comparison failure
left: 1 (0x1); from: errno
right: 9 (0x9); from: EBADF
error: ../sysdeps/unix/sysv/linux/tst-mount.c:55: not true: mfd != -1
../sysdeps/unix/sysv/linux/tst-mount.c:58: numeric comparison failure
left: 1 (0x1); from: errno
right: 2 (0x2); from: ENOENT
error: ../sysdeps/unix/sysv/linux/tst-mount.c:61: not true: r != -1
../sysdeps/unix/sysv/linux/tst-mount.c:65: numeric comparison failure
left: 1 (0x1); from: errno
right: 2 (0x2); from: ENOENT
error: ../sysdeps/unix/sysv/linux/tst-mount.c:68: not true: pfd != -1
error: ../sysdeps/unix/sysv/linux/tst-mount.c:75: not true: fd_tree != -1
../sysdeps/unix/sysv/linux/tst-mount.c:88: numeric comparison failure
left: 1 (0x1); from: errno
right: 38 (0x26); from: ENOSYS
error: 12 test failures
Checking that the test can enter a new mount namespace is more correct
than just checking the return value of support_become_root() as the test
code changes the mount namespace it runs in so running it as root on a
system that does not support mount namespaces should still skip.
Also change the test to remove the unnecessary fork.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
1. Add default ISA level selection in non-multiarch/rtld
implementations.
2. Add ISA level build guards to different implementations.
- I.e strcpy-avx2.S which is ISA level 3 will only build if
compiled ISA level <= 3. Otherwise there is no reason to
include it as we will always use one of the ISA level 4
implementations (strcpy-evex.S).
3. Refactor the ifunc selector and ifunc implementation list to use
the ISA level aware wrapper macros that allow functions below the
compiled ISA level (with a guranteed replacement) to be skipped.
Tested with and without multiarch on x86_64 for ISA levels:
{generic, x86-64-v2, x86-64-v3, x86-64-v4}
And m32 with and without multiarch.
1. Add ISA level build guards to different implementations.
- wcscpy-ssse3.S is used as ISA level 2/3/4.
- wcscpy-generic.c is only used at ISA level 1 and will
only build if compiled with ISA level == 1. Otherwise
there is no reason to include it as we will always use
wcscpy-ssse3.S
2. Refactor the ifunc selector and ifunc implementation list to use
the ISA level aware wrapper macros that allow functions below the
compiled ISA level (with a guranteed replacement) to be skipped.
Tested with and without multiarch on x86_64 for ISA levels:
{generic, x86-64-v2, x86-64-v3, x86-64-v4}
And m32 with and without multiarch.
1. Add default ISA level selection in non-multiarch/rtld
implementations.
2. Add ISA level build guards to different implementations.
- I.e strcmp-avx2.S which is ISA level 3 will only build if
compiled ISA level <= 3. Otherwise there is no reason to
include it as we will always use one of the ISA level 4
implementations (strcmp-evex.S).
3. Refactor the ifunc selector and ifunc implementation list to use
the ISA level aware wrapper macros that allow functions below the
compiled ISA level (with a guranteed replacement) to be skipped.
Tested with and without multiarch on x86_64 for ISA levels:
{generic, x86-64-v2, x86-64-v3, x86-64-v4}
And m32 with and without multiarch.
Starting with commit e070501d12
"Replace __libc_multiple_threads with __libc_single_threaded"
the testcases nptl/tst-cancel-self and
nptl/tst-cancel-self-cancelstate are failing.
This is fixed by only defining SINGLE_THREAD_BY_GLOBAL on s390x,
but not on s390.
Starting with commit 09c76a7409
"Linux: Consolidate {RTLD_}SINGLE_THREAD_P definition",
SINGLE_THREAD_BY_GLOBAL was defined in
sysdeps/unix/sysv/linux/s390/s390-64/sysdep.h.
Lateron the commit 9a973da617
"s390: Consolidate Linux syscall definition" consolidates the sysdep.h files
from s390-32/s390-64 subdirectories. Unfortunately the macro is now always
defined instead of only on s390-64.
As information:
TLS_MULTIPLE_THREADS_IN_TCB is also only defined for s390.
See: sysdeps/s390/nptl/tls.h
wmemcmp isn't used by the dynamic loader so their no need to add an
RTLD stub for it.
Tested with and without multiarch on x86_64 for ISA levels:
{generic, x86-64-v2, x86-64-v3, x86-64-v4}
And m32 with and without multiarch.
This commit doesn't affect libc.so.6, its just housekeeping to prepare
for adding explicit ISA level support.
Tested build on x86_64 and x86_32 with/without multiarch.
This commit doesn't affect libc.so.6, its just housekeeping to prepare
for adding explicit ISA level support.
Tested build on x86_64 and x86_32 with/without multiarch.
This commit doesn't affect libc.so.6, its just housekeeping to prepare
for adding explicit ISA level support.
Tested build on x86_64 and x86_32 with/without multiarch.
This commit doesn't affect libc.so.6, its just housekeeping to prepare
for adding explicit ISA level support.
Tested build on x86_64 and x86_32 with/without multiarch.
This commit doesn't affect libc.so.6, its just housekeeping to prepare
for adding explicit ISA level support.
Tested build on x86_64 and x86_32 with/without multiarch.
This commit doesn't affect libc.so.6, its just housekeeping to prepare
for adding explicit ISA level support.
Tested build on x86_64 and x86_32 with/without multiarch.
This commit doesn't affect libc.so.6, its just housekeeping to prepare
for adding explicit ISA level support.
Tested build on x86_64 and x86_32 with/without multiarch.
This commit doesn't affect libc.so.6, its just housekeeping to prepare
for adding explicit ISA level support.
Tested build on x86_64 and x86_32 with/without multiarch.
This commit doesn't affect libc.so.6, its just housekeeping to prepare
for adding explicit ISA level support.
Tested build on x86_64 and x86_32 with/without multiarch.
This commit doesn't affect libc.so.6, its just housekeeping to prepare
for adding explicit ISA level support.
Tested build on x86_64 and x86_32 with/without multiarch.
This commit doesn't affect libc.so.6, its just housekeeping to prepare
for adding explicit ISA level support.
Because strcmp-sse2.S implements so many functions (more from
avx2/evex/sse42) add a new file 'strcmp-naming.h' to assist in
getting the correct symbol name for all the function across
multiarch/non-multiarch builds.
Tested build on x86_64 and x86_32 with/without multiarch.
The previous macro name can be confusing given that both
`__strcasecmp_l_nonascii` and `__strcasecmp_nonascii` are
functions and we use the `_l` version.
The intrinsics are not available before GCC7 and using standard
operators generates code of equivalent or better quality.
Removed:
_cvtmask64_u64
_kshiftri_mask64
_kand_mask64
Geometric Mean of 5 Runs of Full Benchmark Suite New / Old: 0.958
These functions all have optimized versions:
__strncat_sse2_unaligned, __strncpy_sse2_unaligned, and
stpncpy_sse2_unaligned which are faster than their respective generic
implementations. Since the sse2 versions can run on baseline x86_64,
we should use these as the baseline implementation and can remove the
generic implementations.
Geometric mean of N=20 runs of the entire benchmark suite on:
11th Gen Intel(R) Core(TM) i7-1165G7 @ 2.80GHz (Tigerlake)
__strncat_sse2_unaligned / __strncat_generic: .944
__strncpy_sse2_unaligned / __strncpy_generic: .726
__stpncpy_sse2_unaligned / __stpncpy_generic: .650
Tested build with and without multiarch and full check with multiarch.
gas -mtune= may change NOP generating patterns but -mtune=i686 has no
difference from the default by inspecting .o and .os files.
Note: Clang doesn't support -Wa,-mtune=i686.
Remove redundant strcspn-generic, strpbrk-generic and strspn-generic
from sysdep_routines in sysdeps/x86_64/multiarch/Makefile added by
commit c69f960b01
Author: Noah Goldstein <goldstein.w.n@gmail.com>
Date: Sun Jul 3 21:28:07 2022 -0700
x86: Add support for building str{c|p}{brk|spn} with explicit ISA level
since they have been added to sysdep_routines in sysdeps/x86_64/Makefile.
This change provides implementations for the mbrtoc8 and c8rtomb
functions adopted for C++20 via WG21 P0482R6 and for C2X via WG14
N2653. It also provides the char8_t typedef from WG14 N2653.
The mbrtoc8 and c8rtomb functions are declared in uchar.h in C2X
mode or when the _GNU_SOURCE macro or C++20 __cpp_char8_t feature
test macro is defined.
The char8_t typedef is declared in uchar.h in C2X mode or when the
_GNU_SOURCE macro is defined and the C++20 __cpp_char8_t feature
test macro is not defined (if __cpp_char8_t is defined, then char8_t
is a builtin type).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
We found that string functions were using AND+ADDP
to find the nibble/syndrome mask but there is an easier
opportunity through `SHRN dst.8b, src.8h, 4` (shift
right every 2 bytes by 4 and narrow to 1 byte) and has
same latency on all SIMD ARMv8 targets as ADDP. There
are also possible gaps for memcmp but that's for
another patch.
We see 10-20% savings for small-mid size cases (<=128)
which are primary cases for general workloads.
1. Refactor files so that all implementations are in the multiarch
directory
- Moved the implementation portion of memcmp sse2 from memcmp.S to
multiarch/memcmp-sse2.S
- The non-multiarch file now only includes one of the
implementations in the multiarch directory based on the compiled
ISA level (only used for non-multiarch builds. Otherwise we go
through the ifunc selector).
2. Add ISA level build guards to different implementations.
- I.e memcmp-avx2-movsb.S which is ISA level 3 will only build if
compiled ISA level <= 3. Otherwise there is no reason to include
it as we will always use one of the ISA level 4
implementations (memcmp-evex-movbe.S).
3. Add new multiarch/rtld-{w}memcmp{eq}.S that just include the
non-multiarch {w}memcmp{eq}.S which will in turn select the best
implementation based on the compiled ISA level.
4. Refactor the ifunc selector and ifunc implementation list to use
the ISA level aware wrapper macros that allow functions below the
compiled ISA level (with a guranteed replacement) to be skipped.
Tested with and without multiarch on x86_64 for ISA levels:
{generic, x86-64-v2, x86-64-v3, x86-64-v4}
And m32 with and without multiarch.
1. Refactor files so that all implementations are in the multiarch
directory
- Moved the implementation portion of memset sse2 from memset.S to
multiarch/memset-sse2.S
- The non-multiarch file now only includes one of the
implementations in the multiarch directory based on the compiled
ISA level (only used for non-multiarch builds. Otherwise we go
through the ifunc selector).
2. Add ISA level build guards to different implementations.
- I.e memset-avx2-unaligned-erms.S which is ISA level 3 will only
build if compiled ISA level <= 3. Otherwise there is no reason
to include it as we will always use one of the ISA level 4
implementations (memset-evex-unaligned-erms.S).
3. Add new multiarch/rtld-memset.S that just include the
non-multiarch memset.S which will in turn select the best
implementation based on the compiled ISA level.
4. Refactor the ifunc selector and ifunc implementation list to use
the ISA level aware wrapper macros that allow functions below the
compiled ISA level (with a guranteed replacement) to be skipped.
Tested with and without multiarch on x86_64 for ISA levels:
{generic, x86-64-v2, x86-64-v3, x86-64-v4}
And m32 with and without multiarch.
1. Refactor files so that all implementations are in the multiarch
directory
- Moved the implementation portion of memmove sse2 from memmove.S
to multiarch/memmove-sse2.S
- The non-multiarch file now only includes one of the
implementations in the multiarch directory based on the compiled
ISA level (only used for non-multiarch builds. Otherwise we go
through the ifunc selector).
2. Add ISA level build guards to different implementations.
- I.e memmove-avx2-unaligned-erms.S which is ISA level 3 will only
build if compiled ISA level <= 3. Otherwise there is no reason
to include it as we will always use one of the ISA level 4
implementations (memmove-evex-unaligned-erms.S).
3. Add new multiarch/rtld-memmove.S that just include the
non-multiarch memmove.S which will in turn select the best
implementation based on the compiled ISA level.
4. Refactor the ifunc selector and ifunc implementation list to use
the ISA level aware wrapper macros that allow functions below the
compiled ISA level (with a guranteed replacement) to be skipped.
Tested with and without multiarch on x86_64 for ISA levels:
{generic, x86-64-v2, x86-64-v3, x86-64-v4}
And m32 with and without multiarch.
isa raising memmove
The changes for these functions are different than the others because
the best implementation (sse4_2) requires the generic
implementation as a fallback to be built as well.
Changes are:
1. Add non-multiarch functions for str{c|p}{brk|spn}.c to statically
select the best implementation based on the configured ISA build
level.
2. Add stubs for str{c|p}{brk|spn}-generic and varshift.c to in the
sysdeps/x86_64 directory so that the the sse4 implementation will
have all of its dependencies for the non-multiarch / rtld build
when ISA level >= 2.
3. Add new multiarch/rtld-strcspn.c that just include the
non-multiarch strcspn.c which will in turn select the best
implementation based on the compiled ISA level.
4. Refactor the ifunc selector and ifunc implementation list to use
the ISA level aware wrapper macros that allow functions below the
compiled ISA level (with a guranteed replacement) to be skipped.
Tested with and without multiarch on x86_64 for ISA levels:
{generic, x86-64-v2, x86-64-v3, x86-64-v4}
And m32 with and without multiarch.
And also fixes the SINGLE_THREAD_P macro for SINGLE_THREAD_BY_GLOBAL,
since header inclusion single-thread.h is in the wrong order, the define
needs to come before including sysdeps/unix/sysdep.h. The macro
is now moved to a per-arch single-threade.h header.
The SINGLE_THREAD_P is used on some more places.
Checked on aarch64-linux-gnu and x86_64-linux-gnu.
It was added on Linux 5.12 (2a1867219c7b27f928e2545782b86daaf9ad50bd)
to allow change the properties of a mount or a mount tree using file
descriptors which the new mount api is based on.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The new mount API was added on Linux 5.2 with six new syscalls:
fsopen, fsconfig, fsmount, move_mount, fspick, and open_tree.
The new test verifies minimal functionality along with error paths
for specific arguments and their corner cases.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.2 (a07b20004793d8926f78d63eb5980559f7813404)
to return a O_PATH-opened file descriptor to an existing mountpoint.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.2 (cf3cba4a429be43e5527a3f78859b1bfd9ebc5fb)
that can be used to pick an existing mountpoint into an filesystem
context which can thereafter be used to reconfigure a superblock
with fsconfig syscall.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.2 (ecdab150fddb42fe6a739335257949220033b782)
as a way to a configure filesystem creation context and trigger
actions upon it, to be used in conjunction with fsopen, fspick and
fsmount.
The fsconfig_command commands are currently only defined as an enum,
so they can't be checked on tst-mount-consts.py with current test
support.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The AFP feature (Alternate floating-point behavior) was added in armv8.7 and
introduced new FPCR bits.
Currently, HWCAP2_AFP bits (bit 0, 1, 2) in FPCR are preserved when fenv is
set to default environment. This is a deviation from standard behaviour.
Clear these bits when setting the fenv to default.
There is no libc API to modify the new FPCR bits. Restoring those bits matters
if the user changed them directly.
The main drive is to optimize the internal usage and required size
when sigset_t is embedded in other data structures. On Linux, the
current supported signal set requires up to 8 bytes (16 on mips),
was lower than the user defined sigset_t (128 bytes).
A new internal type internal_sigset_t is added, along with the
functions to operate on it similar to the ones for sigset_t. The
internal-signals.h is also refactored to remove unused functions
Besides small stack usage on some functions (posix_spawn, abort)
it lower the struct pthread by about 120 bytes (112 on mips).
Checked on x86_64-linux-gnu.
Reviewed-by: Arjun Shankar <arjun@redhat.com>
The new asymmetric mode is available when HWCAP2_MTE3 is set (support is
available), bit2 is set in the tunable (user request per application),
and the system is configured such that the asymmetric mode is preferred over
sync or async (per-cpu system-wide setting).
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
On success, mq_receive() and mq_timedreceive() return the number of
bytes in the received message, so it requires to check if the value
is larger than 0.
Checked on i686-linux-gnu.
Was missing to for the multiarch build rtld-strncmp-sse4_2.os was
being built and exporting symbols:
build/glibc/string/rtld-strncmp-sse4_2.os:
0000000000000000 T __strncmp_sse42
Introduced in:
commit 11ffcacb64
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Wed Jun 21 12:10:50 2017 -0700
x86-64: Implement strcmp family IFUNC selectors in C
Was missing to for the multiarch build rtld-strcspn-sse4.os was
being built and exporting symbols:
build/glibc/string/rtld-strcspn-sse4.os:
U ___m128i_shift_right
U __strcspn_generic
0000000000000000 T __strcspn_sse42
U strlen
build/glibc/string/rtld-varshift.os:
0000000000000000 R ___m128i_shift_right
Introduced in:
commit 06e51c8f3d
Author: H.J. Lu <hongjiu.lu@intel.com>
Date: Fri Jul 3 02:48:56 2009 -0700
Add SSE4.2 support for strcspn, strpbrk, and strspn on x86-64.
Was missing to for the multiarch build rtld-memmove-ssse3.os was
being built and exporting symbols:
>$ nm string/rtld-memmove-ssse3.os
U __GI___chk_fail
0000000000000020 T __memcpy_chk_ssse3
0000000000000040 T __memcpy_ssse3
0000000000000020 T __memmove_chk_ssse3
0000000000000040 T __memmove_ssse3
0000000000000000 T __mempcpy_chk_ssse3
0000000000000010 T __mempcpy_ssse3
U __x86_shared_cache_size_half
Introduced after 2.35 in:
commit 26b2478322
Author: Noah Goldstein <goldstein.w.n@gmail.com>
Date: Thu Apr 14 11:47:40 2022 -0500
x86: Reduce code size of mem{move|pcpy|cpy}-ssse3
1. Remove sse2 instructions when using the avx512 or avx version.
2. Fixup some format nits in how the address offsets where aligned.
3. Use more space efficient instructions in the conditional AVX
restoral.
- vpcmpeqq -> vpcmpeqb
- cmp imm32, r; jz -> inc r; jz
4. Use `rep movsb` instead of `rep movsq`. The former is guranteed to
be fast with the ERMS flags, the latter is not. The latter also
wastes an instruction in size setup.
The primary memmove_{impl}_unaligned_erms implementations don't
interact with this function. Putting them in same file both
wastes space and unnecessarily bloats a hot code section.
Implementation wise:
1. Remove the VZEROUPPER as memset_{impl}_unaligned_erms does not
use the L(stosb) label that was previously defined.
2. Don't give the hotpath (fallthrough) to zero size.
Code positioning wise:
Move memset_{chk}_erms to its own file. Leaving it in between the
memset_{impl}_unaligned both adds unnecessary complexity to the
file and wastes space in a relatively hot cache section.
These files simply include the sysdeps/posix implementations which would
be used even in the absence of the files. They have been unnecessary
since 7b17aeda0c when nice and signal were removed from the
syscalls.list file.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This maintains compatibility between <sys/mman.h> and <linux/uio.h>.
Before that, the addition of process_madvise made those two header
files incompatible. This has been observed resulting in a build
failure in LLDB's Process/Linux/NativeRegisterContextLinux_s390x.cpp
source file.
Fixes commit d19ee3473d
("linux: Add process_madvise").
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
When glibc is built with x86-64 ISA level v3, SSE run-time resolvers
aren't used. For x86-64 ISA level v4 build, both SSE and AVX resolvers
are unused. Check the minimum x86-64 ISA level to exclude the unused
run-time resolvers.
Add third argument to X86_ISA_CPU_FEATURES_ARCH_P macro so the runtime
CPU_FEATURES_ARCH_P check can be inverted if the
MINIMUM_X86_ISA_LEVEL is not high enough to constantly evaluate
the check.
Use this new macro to correct the backwards check in ifunc-evex.h
The function was tuned around 64-byte entry alignment and performs
better for all sizes with it.
As well different code boths where explicitly written to touch the
minimum number of cache line i.e sizes <= 32 touch only the entry
cache line.
By adding an internal alias to avoid the GOT indirection.
On some architecture, __libc_single_thread may be accessed through
copy relocations and thus it requires to update also the copies
default copy.
This is done by adding a new internal macro,
libc_hidden_data_{proto,def}, which has an addition argument that
specifies the alias name (instead of default __GI_ one).
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Fangrui Song <maskray@google.com>
It was added on Linux 5.2 (2db154b3ea8e14b04fee23e3fdfd5e9d17fbc6ae)
as way t move a mount from one place to another and, in the next
commit, allow to attach an unattached mount tree.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
It was added on 5.2 (93766fbd2696c2c4453dd8e1070977e9cd4e6b6d) to
provide a way by which a filesystem opened with fsopen and configured
by a series of fsconfig calls can have a detached mount object
created for it.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.2 (24dcb3d90a1f67fe08c68a004af37df059d74005)
to start the process of preparing to create a superblock that will
then be mountable, using an fd as a context handle.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Minor clean-up, we need to change this part in following patch, clean this up
to prevent we duplicated the change twice.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The sanity tests where meant to ensure that the default implementation
was only being built without multiarch with the exception of the
multiarch/rtld-*.S files.
The code used IS_IN (rtld) to check if the build for was for an
multiarch/rtld-*.S file which is incorrect as IS_IN (rtld) is set for
the non-multiarch build as well.
Most of these don't really matter as there was no dirty upper state
but we should generally avoid stray sse when its not needed.
The one case that really matters is in svml_d_tanh4_core_avx2.S:
blendvps %xmm0, %xmm8, %xmm7
When there was a dirty upper state.
Tested on x86_64-linux
1. Refactor files so that all implementations for in the multiarch
directory.
- Essentially moved sse2 {raw|w}memchr.S implementation to
multiarch/{raw|w}memchr-sse2.S
- The non-multiarch {raw|w}memchr.S file now only includes one of
the implementations in the multiarch directory based on the
compiled ISA level (only used for non-multiarch builds.
Otherwise we go through the ifunc selector).
2. Add ISA level build guards to different implementations.
- I.e memchr-avx2.S which is ISA level 3 will only build if
compiled ISA level <= 3. Otherwise there is no reason to include
it as we will always use one of the ISA level 4
implementations (memchr-evex{-rtm}.S).
3. Add new multiarch/rtld-{raw}memchr.S that just include the
non-multiarch {raw}memchr.S which will in turn select the best
implementation based on the compiled ISA level.
4. Refactor the ifunc selector and ifunc implementation list to use
the ISA level aware wrapper macros that allow functions below the
compiled ISA level (with a guranteed replacement) to be skipped.
- Guranteed replacement essentially means that for any ISA level
build there must be a function that the baseline of the ISA
supports. So for {raw|w}memchr.S since there is not ISA level 2
function, the ISA level 2 build still includes the ISA level
1 (sse2) function. Once we reach the ISA level 3 build, however,
{raw|w}memchr-avx2{-rtm}.S will always be sufficient so the ISA
level 1 implementation ({raw|w}memchr-sse2.S) will not be built.
Tested with and without multiarch on x86_64 for ISA levels:
{generic, x86-64-v2, x86-64-v3, x86-64-v4}
And m32 with and without multiarch.
1. Factor out some of the ISA level defines in isa-level.c to
standalone header isa-level.h
2. Add new headers with ISA level dependent macros for handling
ifuncs.
Note, this file does not change any code.
Tested with and without multiarch on x86_64 for ISA levels:
{generic, x86-64-v2, x86-64-v3, x86-64-v4}
And m32 with and without multiarch.
Let's use LC_ALL=C as we do elsewhere for consistency.
Tested on s390x-ibm-linux-gnu.
See: 72bd208846
Signed-off-by: Sam James <sam@gentoo.org>
Reviewed-by: Stefan Liebler <stli@linux.ibm.com>
We already check for it in root configure.ac with AC_CHECK_TOOL. Let's
use the result.
Tested on s390x-ibm-linux-gnu.
Signed-off-by: Sam James <sam@gentoo.org>
Reviewed-by: Stefan Liebler <stli@linux.ibm.com>
commit c22eb807b0
Author: Noah Goldstein <goldstein.w.n@gmail.com>
Date: Thu Jun 16 15:07:12 2022 -0700
x86: Rename generic functions with unique postfix for clarity
Changed the names of the strspn-c, strcspn-c, and strpbrk-c files
in a general refactor. It didn't change the include paths for the
i386 files breaking the i386 build. This commit fixes that.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
No functions are changed. It just renames generic implementations from
'{func}_sse2' to '{func}_generic'. This is just because the postfix
"_sse2" was overloaded and was used for files that had hand-optimized
sse2 assembly implementations and files that just redirected back
to the generic implementation.
Full xcheck passed on x86_64.
The RTLD_BOOTSTRAP branch is used to relocate ld.so itself. It only
needs to handle RELATIVE, GLOB_DAT, and JUMP_SLOT. RELATIVE has been
handled (by _ELF_DYNAMIC_DO_RELOC due to DT_RELACOUNT, or RELR), so the
switch statement only needs to handle GLOB_DAT and JUMP_SLOT.
We can drop these `#if[n]def RTLD_BOOTSTRAP` and add a large
`# ifndef RTLD_BOOTSTRAP` instead.
The RTLD_BOOTSTRAP branch is used to relocate ld.so itself. It only
needs to handle RELATIVE, GLOB_DAT, and JUMP_SLOT.
TLSDESC/TLS_DTPMOD/TLS_DTPREL handling can be removed. Remove
`case AARCH64_R(RELATIVE)` as well as elf_machine_rela has checked it.
Tested on aarch64-linux-gnu.
The RTLD_BOOTSTRAP branch is used to relocate ld.so itself. It only
needs to handle RELATIVE, GLOB_DAT, and the symbolic relocation type
(R_RISCV_{32,64}). NONE and IRELATIVE can be removed.
The code relies on ld.so having DT_RELACOUNT so that the RTLD_BOOTSTRAP
branch does not need handle RELATIVE. Drop this minor size
optimization for clarity.
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
1. Fix incorrect lower-bound threshold in L(large_memcpy_2x).
Previously was using `__x86_rep_movsb_threshold` and should
have been using `__x86_shared_non_temporal_threshold`.
2. Avoid reloading __x86_shared_non_temporal_threshold before
the L(large_memcpy_4x) bounds check.
3. Document the second bounds check for L(large_memcpy_4x)
more clearly.
The lower-bound (16448) and upper-bound (SIZE_MAX / 16) are assumed
by memmove-vec-unaligned-erms.
The lower-bound is needed because memmove-vec-unaligned-erms unrolls
the loop aggressively in the L(large_memset_4x) case.
The upper-bound is needed because memmove-vec-unaligned-erms
right-shifts the value of `x86_non_temporal_threshold` by
LOG_4X_MEMCPY_THRESH (4) which without a bound may overflow.
The lack of lower-bound can be a correctness issue. The lack of
upper-bound cannot.
If an executable has copy relocations for extern protected data, that
can only work if the library containing the definition is built with
assumptions (a) the compiler emits GOT-generating relocations (b) the
linker produces R_*_GLOB_DAT instead of R_*_RELATIVE. Otherwise the
library uses its own definition directly and the executable accesses a
stale copy. Note: the GOT relocations defeat the purpose of protected
visibility as an optimization, but allow rtld to make the executable and
library use the same copy when copy relocations are present, but it
turns out this never worked perfectly.
ELF_RTYPE_CLASS_EXTERN_PROTECTED_DATA has strange semantics when both
a.so and b.so define protected var and the executable copy relocates
var: b.so accesses its own copy even with GLOB_DAT. The behavior change
is from commit 62da1e3b00 (x86) and then
copied to nios2 (ae5eae7cfc) and arc
(0e7d930c4c).
Without ELF_RTYPE_CLASS_EXTERN_PROTECTED_DATA, b.so accesses the copy
relocated data like a.so.
There is now a warning for copy relocation on protected symbol since
commit 7374c02b68. It's extremely
unlikely anyone relies on the ELF_RTYPE_CLASS_EXTERN_PROTECTED_DATA
behavior, so let's remove it: this removes a check in the symbol lookup
code.
This has been missing since the the ifuncs where added.
The performance of SSE4.2 is preferable to to SSE2.
Measured on Tigerlake with N = 20 runs.
Geometric Mean of all benchmarks SSE4.2 / SSE2: 0.906
Move the setting of `rep_movsb_stop_threshold` to after the tunables
have been collected so that the `rep_movsb_stop_threshold` (which
is used to redirect control flow to the non_temporal case) will
use any user value for `non_temporal_threshold` (set using
glibc.cpu.x86_non_temporal_threshold)
Refine commit 349b0441da:
1. Copy relocations for extern protected data do not work properly,
regardless whether GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS is used.
It makes sense to produce a warning unconditionally.
2. Non-zero value of an undefined function symbol may break pointer
equality, but may be benign in many cases (many programs don't take the
address in the shared object then compare it with the address in the
executable). Reword the diagnostic to be clearer.
3. Remove the unneeded condition !(undef_map->l_1_needed &
GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS). If the executable does
not not have GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS (can only
occur in error cases), the diagnostic should be emitted as well.
When the defining shared object has
GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS, report an error to apply
the intended enforcement.
Add a proper bounds check to __libc_ifunc_impl_list. This makes MAX_IFUNC
redundant and fixes several targets that will write outside the array.
To avoid unnecessary large diffs, pass the maximum in the argument 'i' to
IFUNC_IMPL_ADD - 'max' can be used in new ifunc definitions and existing
ones can be updated if desired.
Passes buildmanyglibc.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Optimizations are:
1. Reduce code size (-112 bytes).
2. Remove redundant move instructions.
3. Slightly improve instruction selection/scheduling where
possible.
4. Prefer registers which get short instruction encoding.
5. Reduce rodata size (-4k+ rodata is shared with avx2).
Result is roughly a 15-16% speedup:
Function, New Time, Old Time, New / Old
_ZGVbN4v_tanhf, 3.158, 3.749, 0.842
Optimizations are:
1. Reduce code size (-81 bytes).
2. Remove redundant move instructions.
3. Slightly improve instruction selection/scheduling where
possible.
4. Prefer registers which get short instruction encoding.
5. Reduce rodata size (-32 bytes).
Result is roughly a 17-18% speedup:
Function, New Time, Old Time, New / Old
_ZGVdN8v_tanhf, 1.977, 2.402, 0.823
tanhf-avx2 and tanhf-sse4 use the same data tables so we can save
over 4kb using a shared datatable. This does increase the memory
footprint of the sse4 version (as now all the targets are 32 bytes
instead of 16), generally it seems worth the code size save.
NB: This patch doesn't do anything itself, it is setup for future
patches.
Optimizations are:
1. Reduce code size (-67 bytes).
2. Remove redundant move instructions.
3. Slightly improve instruction selection/scheduling where
possible.
4. Reduce rodata usage (-448 bytes).
Result is roughly a 14% speedup:
Function, New Time, Old Time, New / Old
_ZGVeN16v_tanhf, 0.649, 0.752, 0.863
Improvements are:
1. Reduce code size (-62 bytes).
2. Remove redundant move instructions.
3. Slightly improve instruction selection/scheduling where
possible.
4. Prefer registers which get short instruction encoding.
5. Reduce rodata usage (-16 bytes).
The throughput improvement is not significant as the port 0 bottleneck
is unavoidable.
Function, New Time, Old Time, New / Old
_ZGVbN4v_atanhf, 8.821, 8.903, 0.991
Improvements are:
1. Reduce code size (-60 bytes).
2. Remove redundant move instructions.
3. Slightly improve instruction selection/scheduling where
possible.
4. Prefer registers which get short instruction encoding.
5. Shrink rodata usage (-32 bytes).
The throughput improvement is not that significant (3-5%) as the
port 0 bottleneck is unavoidable.
Function, New Time, Old Time, New / Old
_ZGVdN8v_atanhf, 2.799, 2.923, 0.958
Improvements are:
1. Reduce code size (-64 bytes).
2. Remove redundant move instructions.
3. Slightly improve instruction selection/scheduling where
possible.
4. Reduce rodata size ([-128, -188] bytes).
The throughput improvement is not significant as the port 0 bottleneck
is unavoidable.
Function, New Time, Old Time, New / Old
_ZGVeN16v_atanhf, 1.39, 1.408, 0.987
commit 6dcbb7d95d
Author: Noah Goldstein <goldstein.w.n@gmail.com>
Date: Mon Jun 6 21:11:33 2022 -0700
x86: Shrink code size of memchr-avx2.S
Changed how the page cross case aligned string (rdi) in
rawmemchr. This was incompatible with how
`L(cross_page_continue)` expected the pointer to be aligned and
would cause rawmemchr to read data start started before the
beginning of the string. What it would read was in valid memory
but could count CHAR matches resulting in an incorrect return
value.
This commit fixes that issue by essentially reverting the changes to
the L(page_cross) case as they didn't really matter.
Test cases added and all pass with the new code (and where confirmed
to fail with the old code).
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Give fall-through path to `vzeroupper` and taken-path to `vzeroall`.
Generally even on machines with RTM the expectation is the
string-library functions will not be called in transactions.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
This is not meant as a performance optimization. The previous code was
far to liberal in aligning targets and wasted code size unnecissarily.
The total code size saving is: 64 bytes
There are no non-negligible changes in the benchmarks.
Geometric Mean of all benchmarks New / Old: 1.000
Full xcheck passes on x86_64.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
This is not meant as a performance optimization. The previous code was
far to liberal in aligning targets and wasted code size unnecissarily.
The total code size saving is: 59 bytes
There are no major changes in the benchmarks.
Geometric Mean of all benchmarks New / Old: 0.967
Full xcheck passes on x86_64.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
The new code:
1. prioritizes smaller user-arg lengths more.
2. optimizes target placement more carefully
3. reuses logic more
4. fixes up various inefficiencies in the logic. The biggest
case here is the `lzcnt` logic for checking returns which
saves either a branch or multiple instructions.
The total code size saving is: 306 bytes
Geometric Mean of all benchmarks New / Old: 0.760
Regressions:
There are some regressions. Particularly where the length (user arg
length) is large but the position of the match char is near the
beginning of the string (in first VEC). This case has roughly a
10-20% regression.
This is because the new logic gives the hot path for immediate matches
to shorter lengths (the more common input). This case has roughly
a 15-45% speedup.
Full xcheck passes on x86_64.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
The new code:
1. prioritizes smaller user-arg lengths more.
2. optimizes target placement more carefully
3. reuses logic more
4. fixes up various inefficiencies in the logic. The biggest
case here is the `lzcnt` logic for checking returns which
saves either a branch or multiple instructions.
The total code size saving is: 263 bytes
Geometric Mean of all benchmarks New / Old: 0.755
Regressions:
There are some regressions. Particularly where the length (user arg
length) is large but the position of the match char is near the
beginning of the string (in first VEC). This case has roughly a
20% regression.
This is because the new logic gives the hot path for immediate matches
to shorter lengths (the more common input). This case has roughly
a 35% speedup.
Full xcheck passes on x86_64.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
The new code:
1. prioritizes smaller lengths more.
2. optimizes target placement more carefully.
3. reuses logic more.
4. fixes up various inefficiencies in the logic.
The total code size saving is: 394 bytes
Geometric Mean of all benchmarks New / Old: 0.874
Regressions:
1. The page cross case is now colder, especially re-entry from the
page cross case if a match is not found in the first VEC
(roughly 50%). My general opinion with this patch is this is
acceptable given the "coldness" of this case (less than 4%) and
generally performance improvement in the other far more common
cases.
2. There are some regressions 5-15% for medium/large user-arg
lengths that have a match in the first VEC. This is because the
logic was rewritten to optimize finds in the first VEC if the
user-arg length is shorter (where we see roughly 20-50%
performance improvements). It is not always the case this is a
regression. My intuition is some frontend quirk is partially
explaining the data although I haven't been able to find the
root cause.
Full xcheck passes on x86_64.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
The RTM vzeroupper mitigation has no way of replacing inline
vzeroupper not before a return.
This can be useful when hoisting a vzeroupper to save code size
for example:
```
L(foo):
cmpl %eax, %edx
jz L(bar)
tzcntl %eax, %eax
addq %rdi, %rax
VZEROUPPER_RETURN
L(bar):
xorl %eax, %eax
VZEROUPPER_RETURN
```
Can become:
```
L(foo):
COND_VZEROUPPER
cmpl %eax, %edx
jz L(bar)
tzcntl %eax, %eax
addq %rdi, %rax
ret
L(bar):
xorl %eax, %eax
ret
```
This code does not change any existing functionality.
There is no difference in the objdump of libc.so before and after this
patch.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
This patch does not touch any existing code and is only meant to be a
tool for future patches so that simple source files can more easily be
maintained to target multiple VEC classes.
There is no difference in the objdump of libc.so before and after this
patch.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
__strncpy_power9 initializes VR 18 with zeroes to be used throughout the
code, including when zero-padding the destination string. However, the
v18 reference was mistakenly being used for stxv and stxvl, which take a
VSX vector as operand. The code ended up using the uninitialized VSR 18
register by mistake.
Both occurrences have been changed to use the proper VSX number for VR 18
(i.e. VSR 50).
Tested on powerpc, powerpc64 and powerpc64le.
Signed-off-by: Kewen Lin <linkw@gcc.gnu.org>
Add an initial SVE memcpy implementation. Copies up to 32 bytes use SVE
vectors which improves the random memcpy benchmark significantly.
Cleanup the memcpy and memmove ifunc selectors.
Adding a 512-bit EVEX version of strstr. The algorithm works as follows:
(1) We spend a few cycles at the begining to peek into the needle. We
locate an edge in the needle (first occurance of 2 consequent distinct
characters) and also store the first 64-bytes into a zmm register.
(2) We search for the edge in the haystack by looking into one cache
line of the haystack at a time. This avoids having to read past a page
boundary which can cause a seg fault.
(3) If an edge is found in the haystack we first compare the first
64-bytes of the needle (already stored in a zmm register) before we
proceed with a full string compare performed byte by byte.
Benchmarking results: (old = strstr_sse2_unaligned, new = strstr_avx512)
Geometric mean of all benchmarks: new / old = 0.66
Difficult skiptable(0) : new / old = 0.02
Difficult skiptable(1) : new / old = 0.01
Difficult 2-way : new / old = 0.25
Difficult testing first 2 : new / old = 1.26
Difficult skiptable(0) : new / old = 0.05
Difficult skiptable(1) : new / old = 0.06
Difficult 2-way : new / old = 0.26
Difficult testing first 2 : new / old = 1.05
Difficult skiptable(0) : new / old = 0.42
Difficult skiptable(1) : new / old = 0.24
Difficult 2-way : new / old = 0.21
Difficult testing first 2 : new / old = 1.04
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Newer versions of GNU grep (after grep 3.7, not inclusive) will warn on
'egrep' and 'fgrep' invocations.
Convert usages within the tree to their expanded non-aliased counterparts
to avoid irritating warnings during ./configure and the test suite.
Signed-off-by: Sam James <sam@gentoo.org>
Reviewed-by: Fangrui Song <maskray@google.com>
Added in Linux 5.15 (884a7e5964e06ed93c7771c0d7cf19c09a8946f1), the new
syscalls allows a caller to free the memory of a dying target process.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.10 (ecb8ac8b1f146915aa6b96449b66dd48984caacc)
with the same functionality as madvise but using a pidfd of the target
process.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This definition is only used as a fallback with old kernel headers.
The change follows kernel commit bfdf4e6208051ed7165b2e92035b4bf11
("rseq: Remove broken uapi field layout on 32-bit little endian").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
LoongArch is going to be the first architecture supported by Linux that
has neither fstat* nor newfstatat [1], instead exclusively relying on
statx. So in fstatat64's implementation, we need to also enable statx
usage if neither fstatat64 nor newfstatat is present, to prepare for
this new case of kernel ABI.
[1]: https://lore.kernel.org/all/20220518092619.1269111-1-chenhuacai@loongson.cn/
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Linux 5.18 adds a constant MADV_DONTNEED_LOCKED (defined in multiple
header files, but with the same value on all architectures). Add this
constant to bits/mman-linux.h.
Tested for x86_64.
Linux 5.18 defines a new AArch64 HWCAP value HWCAP2_MTE3; add it to
glibc's sysdeps/unix/sysv/linux/aarch64/bits/hwcap.h.
Tested with build-many-glibcs.py for aarch64-linux-gnu.
The compiler may substitute calls to sin or cos with calls to sincos, thus
we should have the same optimized implementations for sincos. The
optimized implementations may produce results that differ, that also makes
sure that the sincos call aggrees with the sin and cos calls.
Since ad43cac44a the generic code already shuffles the argv/envp/auxv
on the stack to remove the ld.so own arguments and thus _dl_skip_args
is always 0. So there is no need to adjust the argc or argv.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Since ad43cac44a the generic code already shuffles the argv/envp/auxv
on the stack to remove the ld.so own arguments and thus _dl_skip_args
is always 0. So there is no need to adjust the argc or argv.
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Since ad43cac44a the generic code already shuffles the argv/envp/auxv
on the stack to remove the ld.so own arguments and thus _dl_skip_args
is always 0. So there is no need to adjust the argc or argv.
Checked with qemu-user that arguments are correctly passed on both
constructors and main program.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Since ad43cac44a the generic code already shuffles the argv/envp/auxv
on the stack to remove the ld.so own arguments and thus _dl_skip_args
is always 0. So there is no need to adjust the argc or argv.
Checked on s390x-linux-gnu and s390-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Since ad43cac44a the generic code already shuffles the argv/envp/auxv
on the stack to remove the ld.so own arguments and thus _dl_skip_args
is always 0. So there is no need to adjust the argc or argv.
Checked with qemu-user that arguments are correctly passed on both
constructors and main program.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Since ad43cac44a the generic code already shuffles the argv/envp/auxv
on the stack to remove the ld.so own arguments and thus _dl_skip_args
is always 0. So there is no need to adjust the argc or argv.
Checked with qemu-user that arguments are correctly passed on both
constructors and main program.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Since ad43cac44a the generic code already shuffles the argv/envp/auxv
on the stack to remove the ld.so own arguments and thus _dl_skip_args
is always 0. So there is no need to adjust the argc or argv.
Checked with qemu-user that arguments are correctly passed on both
constructors and main program.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Since ad43cac44a the generic code already shuffles the argv/envp/auxv
on the stack to remove the ld.so own arguments and thus _dl_skip_args
is always 0. So there is no need to adjust the argc or argv.
Checked with qemu-user that arguments are correctly passed on both
constructors and main program.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Since ad43cac44a the generic code already shuffles the argv/envp/auxv
on the stack to remove the ld.so own arguments and thus _dl_skip_args
is always 0. So there is no need to adjust the argc or argv.
Checked with qemu-user that arguments are correctly passed on both
constructors and main program.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Since ad43cac44a the generic code already shuffles the argv/envp/auxv
on the stack to remove the ld.so own arguments and thus _dl_skip_args
is always 0.
The startup code is changed to read the _dl_argc and _dl_argv values,
and envp is calculated from argc and argv.
Checked on ia64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Since ad43cac44a the generic code already shuffles the argv/envp/auxv
on the stack to remove the ld.so own arguments and thus _dl_skip_args
is always 0. So there is no need to adjust the argc or argv.
Checked on i686-linux-gnu.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Different than other architectures, hppa creates an unrelated stack
frame where ld.so argc/argv adjustments done by ad43cac44a
is not done on the argc/argv saved/restore by _dl_start_user.
Instead load _dl_argc and _dl_argv directlty instead of adjust them
using _dl_skip_args value.
Checked on hppa-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Since ad43cac44a the generic code already shuffles the argv/envp/auxv
on the stack to remove the ld.so own arguments and thus _dl_skip_args
is always 0. It makes the fixup_stack branch ununsed.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Since ad43cac44a the generic code already shuffles the argv/envp/auxv
on the stack to remove the ld.so own arguments and thus _dl_skip_args
is always 0. So there is no need to adjust the argc or argv.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Since ad43cac44a the generic code already shuffles the argv/envp/auxv
on the stack to remove the ld.so own arguments and thus _dl_skip_args
is always 0. It makes the _fixup_stack branch ununsed.
Checked with qemu-user that arguments are correctly passed on both
constructors and main program.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Since ad43cac44a the generic code already shuffles the argv/envp/auxv
on the stack to remove the ld.so own arguments and thus _dl_skip_args
is always 0. It makes the fixup_stack branch ununsed.
Checked with qemu-user that arguments are correctly passed on both
constructors and main program.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
According to x86-64 psABI, r_addend should be ignored for R_X86_64_GLOB_DAT
and R_X86_64_JUMP_SLOT. Since linkers always set their r_addends to 0, we
can ignore their r_addends.
Reviewed-by: Fangrui Song <maskray@google.com>
This patch implements following evex512 version of string functions.
Perf gain for evex512 version is up to 50% as compared to evex,
depending on length and alignment.
Placeholder function, not used by any processor at the moment.
- String length function using 512 bit vectors.
- String N length using 512 bit vectors.
- Wide string length using 512 bit vectors.
- Wide string N length using 512 bit vectors.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This patch updates the kernel version in the tests tst-mman-consts.py
and tst-pidfd-consts.py to 5.18. (There are no new constants covered
by these tests in 5.18, or in 5.17 in the case of tst-pidfd-consts.py
that previously used version 5.16, that need any other header
changes.)
Tested with build-many-glibcs.py.
Linux 5.18 has no new syscalls. Update the version number in
syscall-names.list to reflect that it is still current for 5.18.
Tested with build-many-glibcs.py.
In multi-threaded programs, registering via pthread_atfork,
de-registering implicitly via dlclose, or running pthread_atfork
handlers during fork was protected by an internal lock. This meant
that a pthread_atfork handler attempting to register another handler or
dlclose a dynamically loaded library would lead to a deadlock.
This commit fixes the deadlock in the following way:
During the execution of handlers at fork time, the atfork lock is
released prior to the execution of each handler and taken again upon its
return. Any handler registrations or de-registrations that occurred
during the execution of the handler are accounted for before proceeding
with further handler execution.
If a handler that hasn't been executed yet gets de-registered by another
handler during fork, it will not be executed. If a handler gets
registered by another handler during fork, it will not be executed
during that particular fork.
The possibility that handlers may now be registered or deregistered
during handler execution means that identifying the next handler to be
run after a given handler may register/de-register others requires some
bookkeeping. The fork_handler struct has an additional field, 'id',
which is assigned sequentially during registration. Thus, handlers are
executed in ascending order of 'id' during 'prepare', and descending
order of 'id' during parent/child handler execution after the fork.
Two tests are included:
* tst-atfork3: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This test exercises calling dlclose from prepare, parent, and child
handlers.
* tst-atfork4: This test exercises calling pthread_atfork and dlclose
from the prepare handler.
[BZ #24595, BZ #27054]
Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Both float, double, and _Float128 are assumed to be supported
(float and double already only uses builtins). Only long double
is parametrized due GCC bug 29253 which prevents its usage on
powerpc.
It allows to remove i686, ia64, x86_64, powerpc, and sparc arch
specific implementation.
On ia64 it also fixes the sNAN handling:
math/test-float64x-fabs
math/test-ldouble-fabs
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc-linux-gnu,
powerpc64-linux-gnu, sparc64-linux-gnu, and ia64-linux-gnu.
This reverts commit 0910702c4d.
Say both a.so and b.so define protected data symbol `var` and the executable
copy relocates var. ELF_RTYPE_CLASS_EXTERN_PROTECTED_DATA has strange
semantics: a.so accesses the copy in the executable while b.so accesses its
own. This behavior requires that (a) the compiler emits GOT-generating
relocations (b) the linker produces GLOB_DAT instead of RELATIVE.
Without the ELF_RTYPE_CLASS_EXTERN_PROTECTED_DATA code, b.so's GLOB_DAT
will bind to the executable (normal behavior).
For aarch64 it makes sense to restore the original behavior and don't
pay the ELF_RTYPE_CLASS_EXTERN_PROTECTED_DATA cost. The behavior is very
unlikely used by anyone.
* Clang code generator treats STV_PROTECTED the same way as STV_HIDDEN:
no GOT-generating relocation in the first place.
* gold and lld reject copy relocation on a STV_PROTECTED symbol.
* Nowadays -fpie/-fpic modes are popular. GCC/Clang's codegen uses
GOT-generating relocation when accessing an default visibility
external symbol which avoids copy relocation.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Unroll slightly and enforce good instruction scheduling. This improves
performance on out-of-order machines. The unrolling allows for
pipelined multiplies.
As well, as an optional sysdep, reorder the operations and prevent
reassosiation for better scheduling and higher ILP. This commit
only adds the barrier for x86, although it should be either no
change or a win for any architecture.
Unrolling further started to induce slowdowns for sizes [0, 4]
but can help the loop so if larger sizes are the target further
unrolling can be beneficial.
Results for _dl_new_hash
Benchmarked on Tigerlake: 11th Gen Intel(R) Core(TM) i7-1165G7 @ 2.80GHz
Time as Geometric Mean of N=30 runs
Geometric of all benchmark New / Old: 0.674
type, length, New Time, Old Time, New Time / Old Time
fixed, 0, 2.865, 2.72, 1.053
fixed, 1, 3.567, 2.489, 1.433
fixed, 2, 2.577, 3.649, 0.706
fixed, 3, 3.644, 5.983, 0.609
fixed, 4, 4.211, 6.833, 0.616
fixed, 5, 4.741, 9.372, 0.506
fixed, 6, 5.415, 9.561, 0.566
fixed, 7, 6.649, 10.789, 0.616
fixed, 8, 8.081, 11.808, 0.684
fixed, 9, 8.427, 12.935, 0.651
fixed, 10, 8.673, 14.134, 0.614
fixed, 11, 10.69, 15.408, 0.694
fixed, 12, 10.789, 16.982, 0.635
fixed, 13, 12.169, 18.411, 0.661
fixed, 14, 12.659, 19.914, 0.636
fixed, 15, 13.526, 21.541, 0.628
fixed, 16, 14.211, 23.088, 0.616
fixed, 32, 29.412, 52.722, 0.558
fixed, 64, 65.41, 142.351, 0.459
fixed, 128, 138.505, 295.625, 0.469
fixed, 256, 291.707, 601.983, 0.485
random, 2, 12.698, 12.849, 0.988
random, 4, 16.065, 15.857, 1.013
random, 8, 19.564, 21.105, 0.927
random, 16, 23.919, 26.823, 0.892
random, 32, 31.987, 39.591, 0.808
random, 64, 49.282, 71.487, 0.689
random, 128, 82.23, 145.364, 0.566
random, 256, 152.209, 298.434, 0.51
Co-authored-by: Alexander Monakov <amonakov@ispras.ru>
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
To check for the pidfd functions pidfd_open, pidfd_getfd, pid_send_signal,
and waitid with P_PIDFD.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.4 (3695eae5fee0605f316fbaad0b9e3de791d7dfaf)
to extend waitid to wait on pidfd.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This was added on Linux 5.1(3eb39f47934f9d5a3027fe00d906a45fe3a15fad)
as a way to avoid the race condition of using kill (where PID might be
reused by the kernel between between obtaining the pid and sending the
signal).
If the siginfo_t argument is NULL then pidfd_send_signal is equivalent
to kill. If it is not NULL pidfd_send_signal is equivalent to
rt_sigqueueinfo.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This was added on Linux 5.6 (8649c322f75c96e7ced2fec201e123b2b073bf09)
as a way to retrieve a file descriptors for another process though
pidfd (created either with CLONE_PIDFD or pidfd_getfd). The
functionality is similar to recvmmsg SCM_RIGHTS.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This was added on Linux 5.3 (32fcb426ec001cb6d5a4a195091a8486ea77e2df)
as a way to retrieve a pid file descriptors for process that has not
been created CLONE_PIDFD (by usual fork/clone).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
A separate asm file is easier to maintain than a macro that expands to
inline asm.
The RTLD_START macro is only needed now because _dl_start is local in
rtld.c, but _start has to call it, if _dl_start was made hidden then it
could be empty.
_dl_skip_args is no longer needed.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This is for bug 23293 and it relies on the glibc test system running
tests via explicit ld.so invokation by default.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
_dl_skip_args is always 0, so the target specific code that modifies
argv after relro protection is applied is no longer used.
After the patch relro protection is applied to _dl_argv consistently
on all targets.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
When an executable is invoked as
./ld.so [ld.so-args] ./exe [exe-args]
then the argv is adujusted in ld.so before calling the entry point of
the executable so ld.so args are not visible to it. On most targets
this requires moving argv, env and auxv on the stack to ensure correct
stack alignment at the entry point. This had several issues:
- The code for this adjustment on the stack is written in asm as part
of the target specific ld.so _start code which is hard to maintain.
- The adjustment is done after _dl_start returns, where it's too late
to update GLRO(dl_auxv), as it is already readonly, so it points to
memory that was clobbered by the adjustment. This is bug 23293.
- _environ is also wrong in ld.so after the adjustment, but it is
likely not used after _dl_start returns so this is not user visible.
- _dl_argv was updated, but for this it was moved out of relro, which
changes security properties across targets unnecessarily.
This patch introduces a generic _dl_start_args_adjust function that
handles the argument adjustments after ld.so processed its own args
and before relro protection is applied.
The same algorithm is used on all targets, _dl_skip_args is now 0, so
existing target specific adjustment code is no longer used. The bug
affects aarch64, alpha, arc, arm, csky, ia64, nios2, s390-32 and sparc,
other targets don't need the change in principle, only for consistency.
The GNU Hurd start code relied on _dl_skip_args after dl_main returned,
now it checks directly if args were adjusted and fixes the Hurd startup
data accordingly.
Follow up patches can remove _dl_skip_args and DL_ARGV_NOT_RELRO.
Tested on aarch64-linux-gnu and cross tested on i686-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The Linux version used by i686 and m68k provide three overrrides for
generic code:
1. DISTINGUISH_LIB_VERSIONS to print additional information when
libc5 is used by a dependency.
2. EXTRA_LD_ENVVARS to that enabled LD_LIBRARY_VERSION environment
variable.
3. EXTRA_UNSECURE_ENVVARS to add two environment variables related
to aout support.
None are really requires, it has some decades since libc5 or aout
suppported was removed and Linux even remove support for aout files.
The LD_LIBRARY_VERSION is also dead code, dl_correct_cache_id is not
used anywhere.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
The kernel version check is used to avoid glibc to run on older
kernels where some syscall are not available and fallback code are
not enabled to handle graciously fail. However, it does not prevent
if the kernel does not correctly advertise its version through
vDSO note, uname or procfs.
Also kernel version checks are sometime not desirable by users,
where they want to deploy on different system with different kernel
version knowing the minimum set of syscall is always presented on
such systems.
The kernel version check has been removed along with the
LD_ASSUME_KERNEL environment variable. The minimum kernel used to
built glibc is still provided through NT_GNU_ABI_TAG ELF note and
also printed when libc.so is issued.
Checked on x86_64-linux-gnu.
Currently on Linux __get_nprocs_conf first tries to enumerate the
cpus present in the system by iterating on /sys/devices/system/cpuX
directories. This only enumerates the CPUs that are present in
system (but possibly offline), not taking in account possible CPU
that might added in the system through hotplugging.
Linux provides the maximum number of configured cpus on the
/sys/devices/system/cpu file. Although it might present a larger
value of possible active CPUs on some system (where kernel either
get the information from firmaware or is configured at boot time),
the information is what kernel presents to userland.
This also change the returned value of _SC_NPROCESSORS_CONF, which
aligns as the maximum configure cpu in the system.
Checked on x86_64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
This implements mmap fallback for a brk failure during TLS
allocation.
scripts/tls-elf-edit.py is updated to support the new patching method.
The script no longer requires that in the input object is of ET_DYN
type.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Both symbols are marked as legacy in POSIX.1-2001 and removed on
POSIX.1-2008, although the prototypes are defined for _GNU_SOURCE
or _DEFAULT_SOURCE.
GCC also replaces bcopy with a memmove and bzero with memset on default
configuration (to actually get a bzero libc call the code requires
to omit string.h inclusion and built with -fno-builtin), so it is
highly unlikely programs are actually calling libc bzero symbol.
On a recent Linux distro (Ubuntu 22.04), there is no bzero calls
by the installed binaries.
$ cat count_bstring.sh
#!/bin/bash
files=`IFS=':';for i in $PATH; do test -d "$i" && find "$i" -maxdepth 1 -executable -type f; done`
total=0
for file in $files; do
symbols=`objdump -R $file 2>&1`
if [ $? -eq 0 ]; then
ncalls=`echo $symbols | grep -w $1 | wc -l`
((total=total+ncalls))
if [ $ncalls -gt 0 ]; then
echo "$file: $ncalls"
fi
fi
done
echo "TOTAL=$total"
$ ./count_bstring.sh bzero
TOTAL=0
Checked on x86_64-linux-gnu.
Avoid fiddling with autoconf internals and use AC_DEFINE_UNQUOTED to
define macros in the configuration headers rather than handcoding an
equivalent shell sequence with the use of the `as_echo' undocumented
variable.
Switch to using AC_MSG_ERROR rather than `echo' and `exit' directly for
error handling. Owing to the lack of any kind of error annotation it
makes it difficult to spot the message in the flood in a parallel build
and neither it is logged in `config.log'.
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Avoid fiddling with autoconf internals and use AC_DEFINE_UNQUOTED to
define macros in the configuration headers rather than handcoding an
equivalent shell sequence with the use of the `as_echo' undocumented
variable.
Similarly use AC_MSG_ERROR for error handling rather than the internal
undocumented `as_fn_error' variable. Switch to using 1 as the exit code
as it makes no sense to refer $? in the contexts involved, it's not a
command failure handled there.
Switch to using AC_MSG_ERROR rather than `echo' and `exit' directly for
error handling. Owing to the lack of any kind of error annotation it
makes it difficult to spot the message in the flood in a parallel build
and neither it is logged in `config.log'.
Avoid fiddling with autoconf internals and use AC_DEFINE_UNQUOTED to
define macros in the configuration headers rather than handcoding an
equivalent shell sequence with the use of the `as_echo' undocumented
variable.
Switch to using AC_MSG_ERROR rather than `echo' and `exit' directly for
error handling. Owing to the lack of any kind of error annotation it
makes it difficult to spot the message in the flood in a parallel build
and neither it is logged in `config.log'.
The siglist.c is built with -fno-toplevel-reorder to avoid compiler
to reorder the compat assembly directives due an assembler
issue [1] (fixed on 2.39).
This patch removes the compiler flags by split the compat symbol
generation in two phases. First the __sys_siglist and __sys_sigabbrev
without any compat symbol directive is preprocessed to generate an
assembly source code. This generate assembly is then used as input
on a platform agnostic siglist.S which then creates the compat
definitions. This prevents compiler to move any compat directive
prior the _sys_errlist definition itself.
Checked on a make check run-built-tests=no on all affected ABIs.
Reviewed-by: Fangrui Song <maskray@google.com>
The errlist.c is built with -fno-toplevel-reorder to avoid compiler to
reorder the compat assembly directives due an assembler issue [1]
(fixed on 2.39).
This patch removes the compiler flags by split the compat symbol
generation in two phases. First the _sys_errlist_internal internal
without any compat symbol directive is preprocessed to generate an
assembly source code. This generate assembly is then used as input
on a platform agnostic errlist-data.S which then creates the compat
definitions. This prevents compiler to move any compat directive
prior the _sys_errlist_internal definition itself.
Checked on a make check run-built-tests=no on all affected ABIs.
[1] https://sourceware.org/bugzilla/show_bug.cgi?id=29012
And keep the previous definition if it exists. This allows
disabling IA64_USE_NEW_STUB while keeping USE_DL_SYSINFO defined.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Unlike MMAP_CALL, this avoids a TCB dependency for an errno update
on failure.
<mmap_internal.h> cannot be included as is on several architectures
due to the definition of page_unit, so introduce a separate header
file for the definition of MMAP_CALL and MMAP_CALL_INTERNAL,
<mmap_call.h>.
Reviewed-by: Stefan Liebler <stli@linux.ibm.com>
Improve libmvec benchmark integration so that in future other
architectures may be able to run their libmvec benchmarks as well. This
now allows libmvec benchmarks to be run with `make BENCHSET=bench-math`.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The libmvec benchmarks print a message indicating that a certain CPU
feature is unsupported and exit prematurelyi, which breaks the JSON in
bench.out.
Handle this more elegantly in the bench makefile target by adding
support for an UNSUPPORTED exit status (77) so that bench.out continues
to have output for valid tests.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The AT_SYMLINK_NOFOLLOW emulation ues the default 32 bit stat internal
calls, which fails with EOVERFLOW if the file constains timestamps
beyond 2038.
Checked on i686-linux-gnu.
'get_fast_jitter' is meant to be used purely for performance
purposes. In all cases it's used it should be acceptable to get no
randomness (see default case). An example use case is in setting
jitter for retries between threads at a lock. There is a
performance benefit to having jitter, but only if the jitter can
be generated very quickly and ultimately there is no serious issue
if no jitter is generated.
The implementation generally uses 'HP_TIMING_NOW' iff it is
inlined (avoid any potential syscall paths).
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Copied from gnulib/lib/glob.c in order to fix rhbz 1982608
Also fixes swbz 25659
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
PI_STATIC_AND_HIDDEN indicates whether accesses to internal linkage
variables and hidden visibility variables in a shared object (ld.so)
need dynamic relocations (usually R_*_RELATIVE). PI (position
independent) in the macro name is a misnomer: a code sequence using GOT
is typically position-independent as well, but using dynamic relocations
does not meet the requirement.
Not defining PI_STATIC_AND_HIDDEN is legacy and we expect that all new
ports will define PI_STATIC_AND_HIDDEN. Current ports defining
PI_STATIC_AND_HIDDEN are more than the opposite. Change the configure
default.
No functional change.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
These failures were caught while building glibc master for Fedora
Rawhide which is built with '-mtune=generic -msse2 -mfpmath=sse'
using gcc 11.3 (gcc-11.3.1-2.fc35) on a Cascadelake Intel Xeon
processor.
