TLS_INIT_TCB_ALIGN is not actually used. TLS_TCB_ALIGN was likely
introduced to support a configuration where the thread pointer
has not the same alignment as THREAD_SELF. Only ia64 seems to use
that, but for the stack/pointer guard, not for storing tcbhead_t.
Some ports use TLS_TCB_OFFSET and TLS_PRE_TCB_SIZE to shift
the thread pointer, potentially landing in a different residue class
modulo the alignment, but the changes should not impact that.
In general, given that TLS variables have their own alignment
requirements, having different alignment for the (unshifted) thread
pointer and struct pthread would potentially result in dynamic
offsets, leading to more complexity.
hppa had different values before: __alignof__ (tcbhead_t), which
seems to be 4, and __alignof__ (struct pthread), which was 8
(old default) and is now 32. However, it defines THREAD_SELF as:
/* Return the thread descriptor for the current thread. */
# define THREAD_SELF \
({ struct pthread *__self; \
__self = __get_cr27(); \
__self - 1; \
})
So the thread pointer points after struct pthread (hence __self - 1),
and they have to have the same alignment on hppa as well.
Similarly, on ia64, the definitions were different. We have:
# define TLS_PRE_TCB_SIZE \
(sizeof (struct pthread) \
+ (PTHREAD_STRUCT_END_PADDING < 2 * sizeof (uintptr_t) \
? ((2 * sizeof (uintptr_t) + __alignof__ (struct pthread) - 1) \
& ~(__alignof__ (struct pthread) - 1)) \
: 0))
# define THREAD_SELF \
((struct pthread *) ((char *) __thread_self - TLS_PRE_TCB_SIZE))
And TLS_PRE_TCB_SIZE is a multiple of the struct pthread alignment
(confirmed by the new _Static_assert in sysdeps/ia64/libc-tls.c).
On m68k, we have a larger gap between tcbhead_t and struct pthread.
But as far as I can tell, the port is fine with that. The definition
of TCB_OFFSET is sufficient to handle the shifted TCB scenario.
This fixes commit 23c77f6018
("nptl: Increase default TCB alignment to 32").
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Now that Hurd implementis both close_range and closefrom (f2c996597d),
we can make close_range() a base ABI, and make the default closefrom()
implementation on top of close_range().
The generic closefrom() implementation based on __getdtablesize() is
moved to generic close_range(). On Linux it will be overriden by
the auto-generation syscall while on Hurd it will be a system specific
implementation.
The closefrom() now calls close_range() and __closefrom_fallback().
Since on Hurd close_range() does not fail, __closefrom_fallback() is an
empty static inline function set by__ASSUME_CLOSE_RANGE.
The __ASSUME_CLOSE_RANGE also allows optimize Linux
__closefrom_fallback() implementation when --enable-kernel=5.9 or
higher is used.
Finally the Linux specific tst-close_range.c is moved to io and
enabled as default. The Linuxism and CLOSE_RANGE_UNSHARE are
guarded so it can be built for Hurd (I have not actually test it).
Checked on x86_64-linux-gnu, i686-linux-gnu, and with a i686-gnu
build.
It requires less boilerplate code for newer ports. The _Static_assert
checks from internal setjmp are moved to its own internal test since
setjmp.h is included early by multiple headers (to generate
rtld-sizes.sym).
The riscv jmp_buf-macros.h check is also redundant, it is already
done by riscv configure.ac.
Checked with a build for the affected architectures.
The include cleanup on dl-minimal.c removed too much for some
targets.
Also for Hurd, __sbrk is removed from localplt.data now that
tunables allocated memory through mmap.
Checked with a build for all affected architectures.
The close_range () function implements the same API as the Linux and
FreeBSD syscalls. It operates atomically and reliably. The specified
upper bound is clamped to the actual size of the file descriptor table;
it is expected that the most common use case is with last = UINT_MAX.
Like in the Linux syscall, it is also possible to pass the
CLOSE_RANGE_CLOEXEC flag to mark the file descriptors in the range
cloexec instead of acually closing them.
Also, add a Hurd version of the closefrom () function. Since unlike on
Linux, close_range () cannot fail due to being unuspported by the
running kernel, a fallback implementation is never necessary.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20211106153524.82700-1-bugaevc@gmail.com>
No bug.
This commit adds support for __memcmpeq() as a new ABI for all
targets. In this commit __memcmpeq() is implemented only as an alias
to the corresponding targets memcmp() implementation. __memcmpeq() is
added as a new symbol starting with GLIBC_2.35 and defined in string.h
with comments explaining its behavior. Basic tests that it is callable
and works where added in string/tester.c
As discussed in the proposal "Add new ABI '__memcmpeq()' to libc"
__memcmpeq() is essentially a reserved namespace for bcmp(). The means
is shares the same specifications as memcmp() except the return value
for non-equal byte sequences is any non-zero value. This is less
strict than memcmp()'s return value specification and can be better
optimized when a boolean return is all that is needed.
__memcmpeq() is meant to only be called by compilers if they can prove
that the return value of a memcmp() call is only used for its boolean
value.
All tests in string/tester.c passed. As well build succeeds on
x86_64-linux-gnu target.
5bf07e1b3a ("Linux: Simplify __opensock and fix race condition [BZ #28353]")
made __opensock try NETLINK then UNIX then INET. On the Hurd, only INET
knows about network interfaces, so better actually specify that in
if_index.
INTR_MSG_TRAP was tinkering with esp to make it point to
_hurd_intr_rpc_mach_msg's parameters, and notably use (&msg)[-1] which is
meaningless in C.
Instead, just push the parameters on the stack, which also avoids leaving
local variables of _hurd_intr_rpc_mach_msg below esp. We now also
properly express that OPTION and TIMEOUT may be updated during the trap
call.
C2X adds new <math.h> functions for floating-point maximum and
minimum, corresponding to the new operations that were added in IEEE
754-2019 because of concerns about the old operations not being
associative in the presence of signaling NaNs. fmaximum and fminimum
handle NaNs like most <math.h> functions (any NaN argument means the
result is a quiet NaN). fmaximum_num and fminimum_num handle both
quiet and signaling NaNs the way fmax and fmin handle quiet NaNs (if
one argument is a number and the other is a NaN, return the number),
but still raise "invalid" for a signaling NaN argument, making them
exceptions to the normal rule that a function with a floating-point
result raising "invalid" also returns a quiet NaN. fmaximum_mag,
fminimum_mag, fmaximum_mag_num and fminimum_mag_num are corresponding
functions returning the argument with greatest or least absolute
value. All these functions also treat +0 as greater than -0. There
are also corresponding <tgmath.h> type-generic macros.
Add these functions to glibc. The implementations use type-generic
templates based on those for fmax, fmin, fmaxmag and fminmag, and test
inputs are based on those for those functions with appropriate
adjustments to the expected results. The RISC-V maintainers might
wish to add optimized versions of fmaximum_num and fminimum_num (for
float and double), since RISC-V (F extension version 2.2 and later)
provides instructions corresponding to those functions - though it
might be at least as useful to add architecture-independent built-in
functions to GCC and teach the RISC-V back end to expand those
functions inline, which is what you generally want for functions that
can be implemented with a single instruction.
Tested for x86_64 and x86, and with build-many-glibcs.py.
This is an internal function meant to return the number of avaliable
processor where the process can scheduled, different than the
__get_nprocs which returns a the system available online CPU.
The Linux implementation currently only calls __get_nprocs(), which
in tuns calls sched_getaffinity.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
This patch adds the narrowing fused multiply-add functions from TS
18661-1 / TS 18661-3 / C2X to glibc's libm: ffma, ffmal, dfmal,
f32fmaf64, f32fmaf32x, f32xfmaf64 for all configurations; f32fmaf64x,
f32fmaf128, f64fmaf64x, f64fmaf128, f32xfmaf64x, f32xfmaf128,
f64xfmaf128 for configurations with _Float64x and _Float128;
__f32fmaieee128 and __f64fmaieee128 aliases in the powerpc64le case
(for calls to ffmal and dfmal when long double is IEEE binary128).
Corresponding tgmath.h macro support is also added.
The changes are mostly similar to those for the other narrowing
functions previously added, especially that for sqrt, so the
description of those generally applies to this patch as well. As with
sqrt, I reused the same test inputs in auto-libm-test-in as for
non-narrowing fma rather than adding extra or separate inputs for
narrowing fma. The tests in libm-test-narrow-fma.inc also follow
those for non-narrowing fma.
The non-narrowing fma has a known bug (bug 6801) that it does not set
errno on errors (overflow, underflow, Inf * 0, Inf - Inf). Rather
than fixing this or having narrowing fma check for errors when
non-narrowing does not (complicating the cases when narrowing fma can
otherwise be an alias for a non-narrowing function), this patch does
not attempt to check for errors from narrowing fma and set errno; the
CHECK_NARROW_FMA macro is still present, but as a placeholder that
does nothing, and this missing errno setting is considered to be
covered by the existing bug rather than needing a separate open bug.
missing-errno annotations are duly added to many of the
auto-libm-test-in test inputs for fma.
This completes adding all the new functions from TS 18661-1 to glibc,
so will be followed by corresponding stdc-predef.h changes to define
__STDC_IEC_60559_BFP__ and __STDC_IEC_60559_COMPLEX__, as the support
for TS 18661-1 will be at a similar level to that for C standard
floating-point facilities up to C11 (pragmas not implemented, but
library functions done). (There are still further changes to be done
to implement changes to the types of fromfp functions from N2548.)
Tested as followed: natively with the full glibc testsuite for x86_64
(GCC 11, 7, 6) and x86 (GCC 11); with build-many-glibcs.py with GCC
11, 7 and 6; cross testing of math/ tests for powerpc64le, powerpc32
hard float, mips64 (all three ABIs, both hard and soft float). The
different GCC versions are to cover the different cases in tgmath.h
and tgmath.h tests properly (GCC 6 has _Float* only as typedefs in
glibc headers, GCC 7 has proper _Float* support, GCC 8 adds
__builtin_tgmath).
All the ports now have THREAD_GSCOPE_IN_TCB set to 1. Remove all
support for !THREAD_GSCOPE_IN_TCB, along with the definition itself.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20210915171110.226187-4-bugaevc@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
This is a new implementation of GSCOPE which largely mirrors its NPTL
counterpart. Same as in NPTL, instead of a global flag shared between
threads, there is now a per-thread GSCOPE flag stored in each thread's
TCB. This makes entering and exiting a GSCOPE faster at the expense of
making THREAD_GSCOPE_WAIT () slower.
The largest win is the elimination of many redundant gsync_wake () RPC
calls; previously, even simplest programs would make dozens of fully
redundant gsync_wake () calls.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20210915171110.226187-3-bugaevc@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
The next commit is going to introduce a new implementation of
THREAD_GSCOPE_WAIT which needs to access the list of threads.
Since it must be usable from the dynamic laoder, we have to move
the symbols for the list of threads into the loader.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20210915171110.226187-2-bugaevc@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
This patch adds the narrowing square root functions from TS 18661-1 /
TS 18661-3 / C2X to glibc's libm: fsqrt, fsqrtl, dsqrtl, f32sqrtf64,
f32sqrtf32x, f32xsqrtf64 for all configurations; f32sqrtf64x,
f32sqrtf128, f64sqrtf64x, f64sqrtf128, f32xsqrtf64x, f32xsqrtf128,
f64xsqrtf128 for configurations with _Float64x and _Float128;
__f32sqrtieee128 and __f64sqrtieee128 aliases in the powerpc64le case
(for calls to fsqrtl and dsqrtl when long double is IEEE binary128).
Corresponding tgmath.h macro support is also added.
The changes are mostly similar to those for the other narrowing
functions previously added, so the description of those generally
applies to this patch as well. However, the not-actually-narrowing
cases (where the two types involved in the function have the same
floating-point format) are aliased to sqrt, sqrtl or sqrtf128 rather
than needing a separately built not-actually-narrowing function such
as was needed for add / sub / mul / div. Thus, there is no
__nldbl_dsqrtl name for ldbl-opt because no such name was needed
(whereas the other functions needed such a name since the only other
name for that entry point was e.g. f32xaddf64, not reserved by TS
18661-1); the headers are made to arrange for sqrt to be called in
that case instead.
The DIAG_* calls in sysdeps/ieee754/soft-fp/s_dsqrtl.c are because
they were observed to be needed in GCC 7 testing of
riscv32-linux-gnu-rv32imac-ilp32. The other sysdeps/ieee754/soft-fp/
files added didn't need such DIAG_* in any configuration I tested with
build-many-glibcs.py, but if they do turn out to be needed in more
files with some other configuration / GCC version, they can always be
added there.
I reused the same test inputs in auto-libm-test-in as for
non-narrowing sqrt rather than adding extra or separate inputs for
narrowing sqrt. The tests in libm-test-narrow-sqrt.inc also follow
those for non-narrowing sqrt.
Tested as followed: natively with the full glibc testsuite for x86_64
(GCC 11, 7, 6) and x86 (GCC 11); with build-many-glibcs.py with GCC
11, 7 and 6; cross testing of math/ tests for powerpc64le, powerpc32
hard float, mips64 (all three ABIs, both hard and soft float). The
different GCC versions are to cover the different cases in tgmath.h
and tgmath.h tests properly (GCC 6 has _Float* only as typedefs in
glibc headers, GCC 7 has proper _Float* support, GCC 8 adds
__builtin_tgmath).
We stopped adding "Contributed by" or similar lines in sources in 2012
in favour of git logs and keeping the Contributors section of the
glibc manual up to date. Removing these lines makes the license
header a bit more consistent across files and also removes the
possibility of error in attribution when license blocks or files are
copied across since the contributed-by lines don't actually reflect
reality in those cases.
Move all "Contributed by" and similar lines (Written by, Test by,
etc.) into a new file CONTRIBUTED-BY to retain record of these
contributions. These contributors are also mentioned in
manual/contrib.texi, so we just maintain this additional record as a
courtesy to the earlier developers.
The following scripts were used to filter a list of files to edit in
place and to clean up the CONTRIBUTED-BY file respectively. These
were not added to the glibc sources because they're not expected to be
of any use in future given that this is a one time task:
https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dchttps://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Gnumach's 0650a4ee30e3 implements support for high bits being set in the
mask parameter of vm_map. This allows to remove the fmh kludge that was
masking away the address range by mapping a dumb area there.
When the memory object is read-only, the kernel would be right in
refusing max vmprot containing VM_PROT_WRITE.
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
These deprecated functions are only safe to call from
__malloc_initialize_hook and as a result, are not useful in the
general case. Move the implementations to libc_malloc_debug so that
existing binaries that need it will now have to preload the debug DSO
to work correctly.
This also allows simplification of the core malloc implementation by
dropping all the undumping support code that was added to make
malloc_set_state work.
One known breakage is that of ancient emacs binaries that depend on
this. They will now crash when running with this libc. With
LD_BIND_NOW=1, it will terminate immediately because of not being able
to find malloc_set_state but with lazy binding it will crash in
unpredictable ways. It will need a preloaded libc_malloc_debug.so so
that its initialization hook is executed to allow its malloc
implementation to work properly.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The malloc-check debugging feature is tightly integrated into glibc
malloc, so thanks to an idea from Florian Weimer, much of the malloc
implementation has been moved into libc_malloc_debug.so to support
malloc-check. Due to this, glibc malloc and malloc-check can no
longer work together; they use altogether different (but identical)
structures for heap management. This should not make a difference
though since the malloc check hook is not disabled anywhere.
malloc_set_state does, but it does so early enough that it shouldn't
cause any problems.
The malloc check tunable is now in the debug DSO and has no effect
when the DSO is not preloaded.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Wean mtrace away from the malloc hooks and move them into the debug
DSO. Split the API away from the implementation so that we can add
the API to libc.so as well as libc_malloc_debug.so, with the libc
implementations being empty.
Update localplt data since memalign no longer has any callers after
this change.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Split the mcheck implementation into the debugging hooks and API so
that the API can be replicated in libc and libc_malloc_debug.so. The
libc APIs always result in failure.
The mcheck implementation has also been moved entirely into
libc_malloc_debug.so and with it, all of the hook initialization code
can now be moved into the debug library. Now the initialization can
be done independently of libc internals.
With this patch, libc_malloc_debug.so can no longer be used with older
libcs, which is not its goal anyway. tst-vfork3 breaks due to this
since it spawns shell scripts, which in turn execute using the system
glibc. Move the test to tests-container so that only the built glibc
is used.
This move also fixes bugs in the mcheck version of memalign and
realloc, thus allowing removal of the tests from tests-mcheck
exclusion list.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Remove all malloc hook uses from core malloc functions and move it
into a new library libc_malloc_debug.so. With this, the hooks now no
longer have any effect on the core library.
libc_malloc_debug.so is a malloc interposer that needs to be preloaded
to get hooks functionality back so that the debugging features that
depend on the hooks, i.e. malloc-check, mcheck and mtrace work again.
Without the preloaded DSO these debugging features will be nops.
These features will be ported away from hooks in subsequent patches.
Similarly, legacy applications that need hooks functionality need to
preload libc_malloc_debug.so.
The symbols exported by libc_malloc_debug.so are maintained at exactly
the same version as libc.so.
Finally, static binaries will no longer be able to use malloc
debugging features since they cannot preload the debugging DSO.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This switches to public symbols without __ prefixes, due to improved
namespace management in glibc.
The script was used with --no-new-version to move the symbols
__res_nquery, __res_nquerydomain, __res_nsearch, __res_query,
__res_querydomain, __res_search, res_query, res_querydomain,
res_search. The public symbols res_nquery, res_nquerydomain,
res_nsearch, res_ownok, res_query, res_querydomain, res_search
were added with make update-all-abi.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This switches to public symbols without __ prefixes, due to improved
namespace management in glibc.
The symbols res_mkquery, __res_mkquery, __res_nmkquery were
moved with the script (using --no-new-version).
res_mkquery@@GLIBC_2.34, res_nmkquery@@GLIBC_2.34 were added using
make update-all-abi.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Switch to public symbols without __ prefix (due to improved
namespace management).
__res_send, __res_nsend were moved using the script (with
--no-new-version). res_send@@GLIBC_2.34 and res_nsend@@GLIBC_2.34
were added using make update-all-abi.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This reflects what the remaining functions in the file do.
The __res_dnok, __res_hnok, __res_mailok, __res_ownok were moved
with the script, using --no-new-version, and turned into compat
symbols. __libc_res_dnok@@GLIBC_PRIVATE and
__libc_res_hnok@@GLIBC_PRIVATE are added for internal use, to avoid
accidentally binding to compatibility symbols. The new public
symbols res_dnok, res_hnok, res_mailok, res_ownok were added using
make update-all-abi.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And reformat it to GNU style.
dn_skipname is used outside glibc, so do not deprecate it,
and export it as dn_skipname (not __dn_skipname). Due to internal
users, provide a __libc_dn_skipname alias, and keep __dn_skipname
as a pure compatibility symbol.
__dn_skipname@GLIBC_2.0 was moved using the script, and
dn_skipname@@GLIBC_2.34 was added using make update-all-abi.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And reformat it to GNU style.
dn_comp is used in various programs, so keep it as a non-deprecated
symbol. Switch to dn_comp (not __dn_comp) for the ABI name. There
are no internal users, so interposition is not a problem.
The __dn_comp symbol was moved with scripts/move-symbol-to-libc.py
--no-new-version. dn_comp@@GLIBC_2.34 was added with
make update-all-abi.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And reformat to GNU style.
This switches back to the dn_expand name for the ABI symbol and turns
__dn_expand into a compatibility symbol. With the improved namespace
management in current glibc, it is no longer necessary to use a
private namespace symbol. To avoid old code binding to a
GLIBC_PRIVATE symbol by accident, use __libc_dn_expand for the
internal symbol name.
The symbols dn_expand, __dnexpand were moved using
scripts/move-symbol-to-libc.py, followed by an adjustment to make
dn_expand the only GLIBC_2.34 symbol.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And reformat to GNU style.
The symbol was moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And reformat to GNU style, and eliminate the labellen function.
The symbol was moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And reformat to GNU style, and eliminate the digits variable.
The symbol was moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And reformat to GNU style. Check for negative error returns
(instead of -1).
The symbol was moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And reformat to GNU style. Avoid out-of-bounds pointer arithmetic.
This also results in a fix of bug 28091 due to the additional packet
length checks.
The symbol was moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Carlos O'Donell <carlos@systemhalted.org>
Reformat to GNU style. Avoid out-of-bounds buffer arithmetic.
Eliminate the labellen function.
The symbol was moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reformat to GNU style. Avoid out-of-bounds pointer arithmetic
(e.g., use eom - dn < 2 instead of dn + 1 >= eom). Inline the
labellen function and fold the compression pointer check into
the length check (l >= 64). Assume ASCII encoding.
The symbol was moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This was put in __libc_fork by c32c868ab8 ("posix: Add _Fork [BZ #4737]")
so we need to avoid locking them again in _Fork called by __libc_lock, otherwise
we deadlock.
This patch adds a way to close a range of file descriptors on
posix_spawn as a new file action. The API is similar to the one
provided by Solaris 11 [1], where the file action causes the all open
file descriptors greater than or equal to input on to be closed when
the new process is spawned.
The function posix_spawn_file_actions_addclosefrom_np is safe to be
implemented by iterating over /proc/self/fd, since the Linux spawni.c
helper process does not use CLONE_FILES, so its has own file descriptor
table and any failure (in /proc operation) aborts the process creation
and returns an error to the caller.
I am aware that this file action might be redundant to the current
approach of POSIX in promoting O_CLOEXEC in more interfaces. However
O_CLOEXEC is still not the default and for some specific usages, the
caller needs to close all possible file descriptors to avoid them
leaking. Some examples are CPython (discussed in BZ#10353) and OpenJDK
jspawnhelper [2] (where OpenJDK spawns a helper process to exactly
closes all file descriptors). Most likely any environment which calls
functions that might open file descriptor under the hood and aim to use
posix_spawn might face the same requirement.
Checked on x86_64-linux-gnu and i686-linux-gnu on kernel 5.11 and 4.15.
[1] https://docs.oracle.com/cd/E36784_01/html/E36874/posix-spawn-file-actions-addclosefrom-np-3c.html
[2] https://github.com/openjdk/jdk/blob/master/src/java.base/unix/native/libjava/childproc.c#L82
The function closes all open file descriptors greater than or equal to
input argument. Negative values are clamped to 0, i.e, it will close
all file descriptors.
As indicated by the bug report, this is a common symbol provided by
different systems (Solaris, OpenBSD, NetBSD, FreeBSD) and, although
its has inherent issues with not taking in consideration internal libc
file descriptors (such as syslog), this is also a common feature used
in multiple projects [1][2][3][4][5].
The Linux fallback implementation iterates over /proc and close all
file descriptors sequentially. Although it was raised the questioning
whether getdents on /proc/self/fd might return disjointed entries
when file descriptor are closed; it does not seems the case on my
testing on multiple kernel (v4.18, v5.4, v5.9) and the same strategy
is used on different projects [1][2][3][5].
Also, the interface is set a fail-safe meaning that a failure in the
fallback results in a process abort.
Checked on x86_64-linux-gnu and i686-linux-gnu on kernel 5.11 and 4.15.
[1] 5238e95759/src/basic/fd-util.c (L217)
[2] ddf4b77e11/src/lxc/start.c (L236)
[3] 9e4f2f3a6b/Modules/_posixsubprocess.c (L220)
[4] 5f47c0613e/src/libstd/sys/unix/process2.rs (L303-L308)
[5] https://github.com/openjdk/jdk/blob/master/src/java.base/unix/native/libjava/childproc.c#L82
The symbols forkpty, login, login_tty, logout, logwtmp, openpty
were moved using scripts/move-symbol-to-libc.py.
This is a single commit because most of the symbols are tied together
via forkpty, for example.
Several changes to use hidden prototypes are needed. This commit
also updates pseudoterminal terminology on modified lines.
For 390 (31-bit), this commit follows the existing style for the
compat symbol version creation.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Austin Group issue 62 [1] dropped the async-signal-safe requirement
for fork and provided a async-signal-safe _Fork replacement that
does not run the atfork handlers. It will be included in the next
POSIX standard.
It allow to close a long standing issue to make fork AS-safe (BZ#4737).
As indicated on the bug, besides the internal lock for the atfork
handlers itself; there is no guarantee that the handlers itself will
not introduce more AS-safe issues.
The idea is synchronize fork with the required internal locks to allow
children in multithread processes to use mostly of standard function
(even though POSIX states only AS-safe function should be used). On
signal handles, _Fork should be used intead and only AS-safe functions
should be used.
For testing, the new tst-_Fork only check basic usage. I also added
a new tst-mallocfork3 which uses the same strategy to check for
deadlock of tst-mallocfork2 but using threads instead of subprocesses
(and it does deadlock if it replaces _Fork with fork).
[1] https://austingroupbugs.net/view.php?id=62
The Linux nptl implementation is used as base for generic fork
implementation to handle the internal locks and mutexes. The
system specific bits are moved a new internal _Fork symbol.
(This new implementation will be used to provide a async-signal-safe
_Fork now that POSIX has clarified that fork might not be
async-signal-safe [1]).
For Hurd it means that the __nss_database_fork_prepare_parent and
__nss_database_fork_subprocess will be run in a slight different
order.
[1] https://austingroupbugs.net/view.php?id=62
This function has no dependency on libpthread, so the move is also
applied to Hurd.
The symbol was moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This function has no dependency on libpthread, so the move is also
applied to Hurd.
To avoid localplt failures, use __open64_nocancel instead of
pthread_setcancelstate and open.
The symbol was moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch replaced obsolete AC_TRY_COMPILE to AC_COMPILE_IFELSE or
AC_PREPROC_IFELSE.
It has been confirmed that GNU 'autoconf' 2.69 suppressed obsolete
warnings, updated the following files:
- configure
- sysdeps/mach/configure
- sysdeps/mach/hurd/configure
- sysdeps/s390/configure
- sysdeps/unix/sysv/linux/configure
and didn't change the following files:
- sysdeps/ieee754/ldbl-opt/configure
- sysdeps/unix/sysv/linux/powerpc/configure
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The symbol was moved using scripts/move-symbol-to-libc.py.
In elf/Makefile, remove the $(libdl) dependency from testobj1.so
because it the unused libdl DSO now causes elf/tst-unused-deps to
fail.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The symbol was moved using scripts/move-symbol-to-libc.py.
There is a minor functionality enhancement: dlerror now sets
errno if it was set as part of the exception. (This is the result
of using %m in asprintf, to avoid the strerror PLT call.) The
previous errno value upon function return was unpredictable.
Documenting this as a feature is premature; we need to make sure
that the error codes are meaningful when they are set by the dynamic
loader.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Some symbols have explicit versioned_symbol or compat_symbol markers
in the sources, but no corresponding entry in the Versions files.
This presently works because the local: * directive is only applied
to the base version.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
ISO C2X adds a timespec_getres function alongside the C11
timespec_get, with functionality similar to that of POSIX clock_getres
(including allowing a NULL pointer to be passed to the function).
Implement this function for glibc, similarly to the implementation of
timespec_get.
This includes a basic test like that of timespec_get, but no
documentation in the manual, given that TIME_UTC and timespec_get
aren't documented in the manual at all. The handling of 64-bit time
follows that in timespec_get; people maintaining patch series for
64-bit time will need to update them accordingly (to export
__timespec_getres64, redirect calls in time.h and run the test for
_TIME_BITS=64).
Tested for x86_64 and x86, and (previous version; only testcase
differs) with build-many-glibcs.py.
This change continues the improvements to compile-time out of bounds
checking by decorating more APIs with either attribute access, or by
explicitly providing the array bound in APIs such as tmpnam() that
expect arrays of some minimum size as arguments. (The latter feature
is new in GCC 11.)
The only effects of the attribute and/or the array bound is to check
and diagnose calls to the functions that fail to provide a sufficient
number of elements, and the definitions of the functions that access
elements outside the specified bounds. (There is no interplay with
_FORTIFY_SOURCE here yet.)
Tested with GCC 7 through 11 on x86_64-linux.
It operates similar to execve and it is is already used to implement
fexecve without requiring /proc to be mounted. However, different
than fexecve, if the syscall is not supported by the kernel an error
is returned instead of trying a fallback.
Checked on x86_64-linux-gnu and powerpc64le-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
These make variables can be used to add routines to different
libraries for the Hurd and Linux builds.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
All of the isnan functions are in libc.so due to printf_fp, so move
__isnanf128 there too for consistency.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@ascii.art.br>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
During critical sections, signal handling is deferred and thus RPCs return
EINTR, even if SA_RESTART is set. We thus have to restart the whole critical
section in that case.
This also adds HURD_CRITICAL_UNLOCK in the cases where one wants to
break the section in the middle.
The generic implementation basically handle the system agnostic logic
(filtering out the invalid signals) while the __libc_sigaction is
the function with implements the system and architecture bits.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Both htl and nptl uses a different data structure to implement atfork
handlers. The nptl one was refactored by 27761a1042 to use a dynarray
which simplifies the code.
This patch moves the nptl one to be the generic implementation and
replace Hurd linked one. Different than previous NPTL, Hurd also uses
a global lock, so performance should be similar.
Checked on x86_64-linux-gnu, i686-linux-gnu, and with a build for
i686-gnu.
This will be used to consolidate the libgcc_s access for backtrace
and pthread_cancel.
Unlike the existing backtrace implementations, it provides some
hardening based on pointer mangling.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It turns out the startup code in csu/elf-init.c has a perfect pair of
ROP gadgets (see Marco-Gisbert and Ripoll-Ripoll, "return-to-csu: A
New Method to Bypass 64-bit Linux ASLR"). These functions are not
needed in dynamically-linked binaries because DT_INIT/DT_INIT_ARRAY
are already processed by the dynamic linker. However, the dynamic
linker skipped the main program for some reason. For maximum
backwards compatibility, this is not changed, and instead, the main
map is consulted from __libc_start_main if the init function argument
is a NULL pointer.
For statically linked binaries, the old approach based on linker
symbols is still used because there is nothing else available.
A new symbol version __libc_start_main@@GLIBC_2.34 is introduced because
new binaries running on an old libc would not run their ELF
constructors, leading to difficult-to-debug issues.
It was added by 1bfbaf7130 where it added a libc_hidden_proto for
__fstatfs but it didn't update the Hurd version as well.
Checked with a build for i686-gnu.
BSD 4.1 did not have an argument for TIOCFLUSH, BSD 4.2 added it. There
are still a lot of applications out there that pass a NULL argument to
TIOCFLUSH, so we should rather cope with it.
This reverts commit 20b39d5946 for static
library. This avoids the need to rebuild the world for the case where
libstdc++ (and potentially other libraries) are linked to a old glibc.
To avoid requering to provide xstat symbols for newer ABIs (such as
riscv32) a new LIB_COMPAT macro is added. It is similar to SHLIB_COMPAT
but also works for static case (thus evaluating similar to SHLIB_COMPAT
for both shared and static case).
Checked with a check-abi on all affected ABIs. I also check if the
static library does contains the xstat symbols.
In <sys/platform/x86.h>, define CPU features as enum instead of using
the C preprocessor magic to make it easier to wrap this functionality
in other languages. Move the C preprocessor magic to internal header
for better GCC codegen when more than one features are checked in a
single expression as in x86-64 dl-hwcaps-subdirs.c.
1. Rename COMMON_CPUID_INDEX_XXX to CPUID_INDEX_XXX.
2. Move CPUID_INDEX_MAX to sysdeps/x86/include/cpu-features.h.
3. Remove struct cpu_features and __x86_get_cpu_features from
<sys/platform/x86.h>.
4. Add __x86_get_cpuid_feature_leaf to <sys/platform/x86.h> and put it
in libc.
5. Make __get_cpu_features() private to glibc.
6. Replace __x86_get_cpu_features(N) with __get_cpu_features().
7. Add _dl_x86_get_cpu_features to GLIBC_PRIVATE.
8. Use a single enum index for each CPU feature detection.
9. Pass the CPUID feature leaf to __x86_get_cpuid_feature_leaf.
10. Return zero struct cpuid_feature for the older glibc binary with a
smaller CPUID_INDEX_MAX [BZ #27104].
11. Inside glibc, use the C preprocessor magic so that cpu_features data
can be loaded just once leading to more compact code for glibc.
256 bits are used for each CPUID leaf. Some leaves only contain a few
features. We can add exceptions to such leaves. But it will increase
code sizes and it is harder to provide backward/forward compatibilities
when new features are added to such leaves in the future.
When new leaves are added, _rtld_global_ro offsets will change which
leads to race condition during in-place updates. We may avoid in-place
updates by
1. Rename the old glibc.
2. Install the new glibc.
3. Remove the old glibc.
NB: A function, __x86_get_cpuid_feature_leaf , is used to avoid the copy
relocation issue with IFUNC resolver as shown in IFUNC resolver tests.
In the !MAP_FIXED case, when a bogus address is given mmap should pick up a
valide address rather than returning EINVAL: Posix only talks about
EINVAL for the MAP_FIXED case.
This fixes long-running ghc processes.
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
With xmknod wrapper functions removed (589260cef8), the mknod functions
are now properly exported, and version is done using symbols versioning
instead of the extra _MKNOD_* argument.
It also allows us to consolidate Linux and Hurd mknod implementation.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
With xstat wrapper functions removed (8ed005daf0), the stat functions
are now properly exported, and version is done using symbols versioning
instead of the extra _STAT_* argument.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
The new __proc_waitid RPC now expects WEXITED to be passed, allowing to
properly implement waitid, and thus define the missing W* macros
(according to FreeBSD values).
Instead of having the arch-specific trampoline setup code detect whether
preemption happened or not, we'd rather pass it the sigaction. In the
future, this may also allow to change sa_flags from post_signal().
SA_SIGINFO is actually just another way of expressing what we were
already passing over with struct sigcontext. This just introduces the
SIGINFO interface and fixes the posix values when that interface is
requested by the application.
Change sbrk to fail for !__libc_initial (in the generic
implementation). As a result, sbrk is (relatively) safe to use
for the __libc_initial case (from the main libc). It is therefore
no longer necessary to avoid using it in that case (or updating the
brk cache), and the __libc_initial flag does not need to be updated
as part of dlmopen or static dlopen.
As before, direct brk system calls on Linux may lead to memory
corruption.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This code manages the mappings of the available databases in NSS
(i.e. passwd, hosts, netgroup, etc) with the actions that should
be taken to do a query on those databases.
This is the main API between query functions scattered throughout
glibc and the underlying code (actions, modules, etc).
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
On GNU/Hurd we not only need $(common-objpfx) in LD_LIBRARY_PATH when loading
dynamic objects, but also $(common-objpfx)/mach and $(common-objpfx)/hurd. This
adds an ld-library-path variable to be used as LD_LIBRARY_PATH basis in
Makefiles, and a sysdep-ld-library-path variable for sysdeps to add some
more paths, here mach/ and hurd/.
See
https://sourceware.org/pipermail/libc-alpha/2020-November/119575.html
lib{mach,hurd}user.so gets relocated before libc.so, but its references
to strpcpy and memcpy would need an ifunc decision, which e.g. on
x86 relies on cpu_features, but libc.so's _rtld_global_ro is not
relocated yet.
We can however just make lib{mach,hurd}user.so only call non-ifunc
functions, which can be relocated before libc.so is relocated.
The tls.h inclusion is not really required and limits possible
definition on more arch specific headers.
This is a cleanup to allow inline functions on sysdep.h, more
specifically on i386 and ia64 which requires to access some tls
definitions its own.
No semantic changes expected, checked with a build against all
affected ABIs.
Now that _hurd_libc_proc_init is idempotent, we can always call it,
independently of the __libc_multiple_libcs test which may not match
whether signals should be started or not.
Notifying the proc server is an involved task, and unleashes various signal
handling etc. so we have to do this after e.g. ifunc relocations are
completed.
Since htl does not actually need a stack switch, we can initialize it
like nptl is, avoiding all sorts of startup issues with ifunc.
More precisely, htl defines __pthread_initialize_minimal instead of the
elder _cthread_init_routine. We can then drop the stack switching dances.
We need NO_RTLD_HIDDEN because of the need for PLT calls in ld.so.
See Roland's comment in
https://sourceware.org/bugzilla/show_bug.cgi?id=15605
"in the Hurd it's crucial that calls like __mmap be the libc ones
instead of the rtld-local ones after the bootstrap phase, when the
dynamic linker is being used for dlopen and the like."
We used to just avoid all hidden use in the rtld ; this commit switches to
keeping only those that should use PLT calls, i.e. essentially those defined in
sysdeps/mach/hurd/dl-sysdep.c:
__assert_fail
__assert_perror_fail
__*stat64
_exit
This fixes a few startup issues, notably the call to __tunable_get_val that is
made before PLTs are set up.
DL_SYSDEP_INIT and DL_PLATFORM_INIT were not getting called, leading to
missing x86 platform tuning, now mandatory with 0f09154c64
("x86: Initialize CPU info via IFUNC relocation [BZ 26203]")
It also decouple mknod{at} from xmknod{at}. The riscv32 ABI was added
on 2.33, so it is safe to remove the old __xmknot{at} symbols and just
provide the newer mknod{at} ones.
Checked with a build for all affected ABIs. I also checked on x86_64,
i686, powerpc, powerpc64le, sparcv9, sparc64, s390, and s390x.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
This patch removes the mknod and mknodat static wrapper and add the
symbols on the libc with the expected names.
Both the prototypes of the internal symbol linked by the static
wrappers and the inline redirectors are also removed from the installed
sys/stat.h header file. The wrapper implementation license LGPL
exception is also removed since it is no longer statically linked to
binaries.
Internally the _STAT_VER* definitions are moved to the arch-specific
xstatver.h file.
Checked with a build for all affected ABIs. I also checked on x86_64,
i686, powerpc, powerpc64le, sparcv9, sparc64, s390, and s390x.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
This patch removes the stat, stat64, lstat, lstat64, fstat, fstat64,
fstatat, and fstatat64 static wrapper and add the symbol on the libc
with the expected names.
Both the prototypes of the internal symbol linked by the static
wrappers and the inline redirectors are also removed from the installed
sys/stat.h header file. The wrapper implementation license LGPL
exception is also removed since it is no longer statically linked to
binaries.
Internally the _STAT_VER* definitions are moved to a arch-specific
xstatver.h file. The internal defines that redirects internals
{f}stat{at} to their {f}xstat{at} counterparts are removed for Linux
(!NO_RTLD_HIDDEN). Hurd still requires them since {f}stat{at} pulls
extra objects that makes the loader build fail otherwise (I haven't
dig into why exactly).
Checked with a build for all affected ABIs. I also checked on x86_64,
i686, powerpc, powerpc64le, sparcv9, sparc64, s390, and s390x.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
This patch adds the ABI-related bits to reflect the new mallinfo2
function, and adds a test case to verify basic functionality.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
It replaces the internal usage of __{f,l}xstat{at}{64} with the
__{f,l}stat{at}{64}. It should not change the generate code since
sys/stat.h explicit defines redirections to internal calls back to
xstat* symbols.
Checked with a build for all affected ABIs. I also check on
x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Making the brk start exactly at the end of the main application binary was
requiring to get it through the _end symbol, which does not work any more
with recent toolchains, and actually produces in libc.so a confusing
external _end symbol that produces odd results, see
https://sourceware.org/bugzilla/show_bug.cgi?id=23499
Trying to do so is quite outdated anyway with the tendency for address
randomization.
Using _end was also allowing to include the main binary data within
the RLIMIT_DATA, but this also seems outdated with dynamic library
loading, and nowadays' memory consumption via malloc and mmap rather than
statically-allocated data.
This adds a BRK_START macro in <vm_param.h> that just tells where we
want to start the brk, and thus removes the _end symbol.
* sysdeps/mach/hurd/i386/vm_param.h: New file.
* sysdeps/mach/hurd/brk.c: Use BRK_START as brk start instead of _end.
Also ignore __data_start.
* hurd/Versions: Remove _end symbol.
* sysdeps/mach/hurd/i386/libc.abilist: Remove _end symbol.
When e.g. an LD_PRELOAD fails, _dl_signal_exception/error longjmps, but TLS
is not initialized yet, let along signal state. We thus mustn't look at
them within __longjmp.
* sysdeps/mach/hurd/i386/____longjmp_chk.S,__longjmp.S: Check for
initialized value of %gs, and that sigstate is non-NULL.
this means that *always* libnsl is only built as shared library for
backward compatibility and the NSS modules libnss_nis and libnss_nisplus
are not built at all, libnsl's headers aren't installed.
This compatibility is kept only for architectures and ABIs that have
been added in or before version 2.28.
Replacement implementations based on TIRPC, which additionally support
IPv6, are available from <https://github.com/thkukuk/>.
This change does not affect libnss_compat which does not depended
on libnsl since 2.27 and thus can be used without NIS.
libnsl code depends on Sun RPC, e.g. on --enable-obsolete-rpc (installed
libnsl headers use installed Sun RPC headers), which will be removed in
the following commit.
The strerrorname_np returns error number name (e.g. "EINVAL" for EINVAL)
while strerrordesc_np returns string describing error number (e.g
"Invalid argument" for EINVAL). Different than strerror,
strerrordesc_np does not attempt to translate the return description,
both functions return NULL for an invalid error number.
They should be used instead of sys_errlist and sys_nerr, both are
thread and async-signal safe. These functions are GNU extensions.
Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
and s390x-linux-gnu.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The sigabbrev_np returns the abbreviated signal name (e.g. "HUP" for
SIGHUP) while sigdescr_np returns the string describing the error
number (e.g "Hangup" for SIGHUP). Different than strsignal,
sigdescr_np does not attempt to translate the return description and
both functions return NULL for an invalid signal number.
They should be used instead of sys_siglist or sys_sigabbrev and they
are both thread and async-signal safe. They are added as GNU
extensions on string.h header (same as strsignal).
Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
and s390x-linux-gnu.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Use snprintf instead of mempcpy plus itoa_word and remove unused
definitions. There is no potential for infinite recursion because
snprintf only use strerror_r for the %m specifier.
Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
and s390x-linux-gnu.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The buffer allocation uses the same strategy of strsignal.
Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
and s390x-linux-gnu.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
If the thread is terminated then __libc_thread_freeres will free the
storage via __glibc_tls_internal_free.
It is only within the calling thread that this matters. It makes
strerror MT-safe.
Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
and s390x-linux-gnu.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The symbol is deprecated by strerror since its usage imposes some issues
such as copy relocations.
Its internal name is also changed to _sys_errlist_internal to avoid
static linking usage. The compat code is also refactored by removing
the over enginered errlist-compat.c generation from manual entried and
extra comment token in linker script file. It disantangle the code
generation from manual and simplify both Linux and Hurd compat code.
The definitions from errlist.c are moved to errlist.h and a new test
is added to avoid a new errno entry without an associated one in manual.
Checked on x86_64-linux-gnu and i686-linux-gnu. I also run a check-abi
on all affected platforms.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The symbol was deprecated by strsignal and its usage imposes issues
such as copy relocations.
Its internal name is changed to __sys_siglist and __sys_sigabbrev to
avoid static linking usage. The compat code is also refactored, since
both Linux and Hurd usage the same strategy: export the same array with
different object sizes.
The libSegfault change avoids calling strsignal on the SIGFAULT signal
handler (the current usage is already sketchy, adding a call that
potentially issue locale internal function is even sketchier).
Checked on x86_64-linux-gnu and i686-linux-gnu. I also run a check-abi
on all affected platforms.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It refactor how signals are defined by each architecture. Instead of
include a generic header (bits/signum-generic.h) and undef non-default
values in an arch specific header (bits/signum.h) the new scheme uses a
common definition (bits/signum-generic.h) and each architectures add
its specific definitions on a new header (bits/signum-arch.h).
For Linux it requires copy some system default definitions to alpha,
hppa, and sparc. They are historical values and newer ports uses
the generic Linux signum-arch.h.
For Hurd the BSD signum is removed and moved to a new header (it is
used currently only on Hurd).
Checked on a build against all affected ABIs.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The variable is placed in libc.so, and it can be true only in
an outer libc, not libcs loaded via dlmopen or static dlopen.
Since thread creation from inner namespaces does not work,
pthread_create can update __libc_single_threaded directly.
Using __libc_early_init and its initial flag, implementation of this
variable is very straightforward. A future version may reset the flag
during fork (but not in an inner namespace), or after joining all
threads except one.
Reviewed-by: DJ Delorie <dj@redhat.com>
* hurd/hurdselect.c: Include <sysdep-cancel.h>.
(_hurd_select): Surround call to __mach_msg with enabling async cancel.
* sysdeps/mach/hurd/accept4.c: Include <sysdep-cancel.h>.
(__libc_accept4): Surround call to __socket_accept with enabling async cancel,
and use HURD_DPORT_USE_CANCEL instead of HURD_DPORT_USE.
* sysdeps/mach/hurd/connect.c: Include <sysdep-cancel.h>.
(__connect): Surround call to __file_name_lookup and __socket_connect
with enabling async cancel, and use HURD_DPORT_USE_CANCEL instead of
HURD_DPORT_USE.
* sysdeps/mach/hurd/fdatasync.c: Include <sysdep-cancel.h>.
(fdatasync): Surround call to __file_sync with enabling async cancel, and use
HURD_DPORT_USE_CANCEL instead of HURD_DPORT_USE.
* sysdeps/mach/hurd/fsync.c: Include <sysdep-cancel.h>.
(fsync): Surround call to __file_sync with enabling async cancel, and use
HURD_DPORT_USE_CANCEL instead of HURD_DPORT_USE.
* sysdeps/mach/hurd/ioctl.c: Include <sysdep-cancel.h>.
(__ioctl): When request is TIOCDRAIN, surround call to send_rpc with enabling
async cancel, and use HURD_DPORT_USE_CANCEL instead of HURD_DPORT_USE.
* sysdeps/mach/hurd/msync.c: Include <sysdep-cancel.h>.
(msync): Surround call to __vm_object_sync with enabling async cancel.
* sysdeps/mach/hurd/sigsuspend.c: Include <sysdep-cancel.h>.
(__sigsuspend): Surround call to __mach_msg with enabling async cancel.
* sysdeps/mach/hurd/sigwait.c: Include <sysdep-cancel.h>.
(__sigwait): Surround wait code with enabling async cancel.
* sysdeps/mach/msync.c: Include <sysdep-cancel.h>.
(msync): Surround call to __vm_msync with enabling async cancel.
* sysdeps/mach/sleep.c: Include <sysdep-cancel.h>.
(__sleep): Surround call to __mach_msg with enabling async cancel.
* sysdeps/mach/usleep.c: Include <sysdep-cancel.h>.
(usleep): Surround call to __vm_msync with enabling async cancel.
and add _nocancel variant.
* sysdeps/mach/hurd/Makefile [io] (sysdep_routines): Add fcntl_nocancel.
* sysdeps/mach/hurd/fcntl.c [NOCANCEL]: Include <not-cancel.h>.
[!NOCANCEL]: Include <sysdep-cancel.h>.
(__libc_fcntl) [!NOCANCEL]: Surround __file_record_lock call with enabling async cancel, and use HURD_FD_PORT_USE_CANCEL instead of HURD_FD_PORT_USE.
* sysdeps/mach/hurd/fcntl_nocancel.c: New file, defines __fcntl_nocancel by including fcntl.c.
* sysdeps/mach/hurd/not-cancel.h (__fcntl64_nocancel): Replace macro with
__fcntl_nocancel declaration with hidden proto, and make
__fcntl64_nocancel call __fcntl_nocancel.
and add _nocancel variant.
* sysdeps/mach/hurd/Makefile [io] (sysdep_routines): Add wait4_nocancel.
* sysdeps/mach/hurd/wait4.c: Include <sysdep-cancel.h>
(__wait4): Surround __proc_wait with enabling async cancel, and use
__USEPORT_CANCEL instead of __USEPORT.
* sysdeps/mach/hurd/wait4_nocancel.c: New file, contains previous
implementation of __wait4.
* sysdeps/mach/hurd/not-cancel.h (__waitpid_nocancel): Replace macro with
__wait4_nocancel declaration with hidden proto, and make
__waitpid_nocancel call __wait4_nocancel.
HURD_*PORT_USE link fd and port with a stack-stored structure, so on
thread cancel we need to cleanup this.
* hurd/fd-cleanup.c: New file.
* hurd/port-cleanup.c (_hurd_port_use_cleanup): New function.
* hurd/Makefile (routines): Add fd-cleanup.
* sysdeps/hurd/include/hurd.h (__USEPORT_CANCEL): New macro.
* sysdeps/hurd/include/hurd/fd.h (_hurd_fd_port_use_data): New
structure.
(_hurd_fd_port_use_cleanup): New prototype.
(HURD_DPORT_USE_CANCEL, HURD_FD_PORT_USE_CANCEL): New macros.
* sysdeps/hurd/include/hurd/port.h (_hurd_port_use_data): New structure.
(_hurd_port_use_cleanup): New prototype.
(HURD_PORT_USE_CANCEL): New macro.
* hurd/hurd/fd.h (HURD_FD_PORT_USE): Also refer to HURD_FD_PORT_USE_CANCEL.
* hurd/hurd.h (__USEPORT): Also refer to __USEPORT_CANCEL.
* hurd/hurd/port.h (HURD_PORT_USE): Also refer to HURD_PORT_USE_CANCEL.
* hurd/fd-read.c (_hurd_fd_read): Call HURD_FD_PORT_USE_CANCEL instead
of HURD_FD_PORT_USE.
* hurd/fd-write.c (_hurd_fd_write): Likewise.
* sysdeps/mach/hurd/send.c (__send): Call HURD_DPORT_USE_CANCEL instead
of HURD_DPORT_USE.
* sysdeps/mach/hurd/sendmsg.c (__libc_sendmsg): Likewise.
* sysdeps/mach/hurd/sendto.c (__sendto): Likewise.
* sysdeps/mach/hurd/recv.c (__recv): Likewise.
* sysdeps/mach/hurd/recvfrom.c (__recvfrom): Likewise.
* sysdeps/mach/hurd/recvmsg.c (__libc_recvmsg): Call __USEPORT_CANCEL
instead of __USEPORT, and HURD_DPORT_USE_CANCEL instead of
HURD_DPORT_USE.
Like hurd_thread_cancel does.
* sysdeps/mach/hurd/htl/pt-docancel.c: Include <hurd/signal.h>
(__pthread_do_cancel): Lock target thread's critical_section_lock and ss
lock around thread mangling.
This patch changes the exp10f error handling semantics to only set
errno according to POSIX rules. New symbol version is introduced at
GLIBC_2.32. The old wrappers are kept for compat symbols.
There are some outliers that need special handling:
- ia64 provides an optimized implementation of exp10f that uses ia64
specific routines to set SVID compatibility. The new symbol version
is aliased to the exp10f one.
- m68k also provides an optimized implementation, and the new version
uses it instead of the sysdeps/ieee754/flt32 one.
- riscv and csky uses the generic template implementation that
does not provide SVID support. For both cases a new exp10f
version is not added, but rather the symbols version of the
generic sysdeps/ieee754/flt32 is adjusted instead.
Checked on aarch64-linux-gnu, x86_64-linux-gnu, i686-linux-gnu,
powerpc64le-linux-gnu.
* sysdeps/mach/hurd/Makefile [subdir=misc] (sysdep_routines): Add
writev_nocancel writev_nocancel_nostatus.
* sysdeps/mach/hurd/not-cancel.h (__writev_nocancel_nostatus): Replace
macro with function declaration (with hidden prototype in libc).
(__writev_nocancel): New function declaration (with hidden prototype in libc).
* sysdeps/mach/hurd/writev_nocancel_nostatus.c: New file.
* sysdeps/posix/writev_nocancel.c: New file, includes writev.c to make a
nocancel variant that calls __write_nocancel.
* sysdeps/posix/writev.c (writev): Do not define alias if __writev is
renamed.
and add _nocancel variants.
* sysdeps/mach/hurd/write.c (__libc_write): Call __write_nocancel
surrounded by enabling async cancel, to replace implementation moved
to...
* sysdeps/mach/hurd/write_nocancel.c (__write_nocancel): ... here.
* sysdeps/mach/hurd/pwrite64.c (__libc_pwrite64): Call
__pwrite64_nocancel surrounded by enabling async cancel, to replace
implementation moved to...
* sysdeps/mach/hurd/pwrite64_nocancel.c (__pwrite64_nocancel): ... here.
* sysdeps/mach/hurd/Makefile (sysdep_routines): Add write_nocancel and
pwrite64_nocancel.
* sysdeps/mach/hurd/not-cancel.h (__write_nocancel,
__pwrite64_nocancel): Replace macros with prototypes with a hidden proto on
libc.
* sysdeps/mach/hurd/dl-sysdep.c (__write_nocancel): New alias, check
that it is not hidden.
* sysdeps/mach/hurd/Versions (libc.GLIBC_PRIVATE): Add __write_nocancel.
(ld.GLIBC_PRIVATE): Add __write_nocancel.
* sysdeps/mach/hurd/i386/localplt.data (__write_nocancel): Add
reference.
* sysdeps/mach/hurd/recv.c (__recv): Make the __socket_recv call
cancellable.
* sysdeps/mach/hurd/recvfrom.c (__recvfrom): Make the __socket_recv and
__socket_whatis_address calls cancellable.
* sysdeps/mach/hurd/recvmsg.c (__libc_recvmsg): Make the __socket_recv,
__socket_whatis_address, __io_reauthenticate, and __auth_user_authenticate calls
cancellable.
* sysdeps/htl/pthreadP.h: Include <link.h>
(__pthread_init_static_tls): New prototype.
* htl/pt-alloc.c (__pthread_init_static_tls): New function.
* sysdeps/mach/hurd/htl/pt-sysdep.c (_init_routine): Initialize tcb
field of initial thread. Set GL(dl_init_static_tls) to
&__pthread_init_static_tls.
and add _nocancel variants.
* sysdeps/mach/hurd/pread64.c (__libc_pread64): Call __pread64_nocancel
surrounded by enabling async cancel, to replace implementation moved to...
* sysdeps/mach/hurd/pread64_nocancel.c (__pread64_nocancel): ... here.
* sysdeps/mach/hurd/read.c (__libc_read): Call __read_nocancel surrounded by
enabling async cancel, to replace implementation moved to...
* sysdeps/mach/hurd/read_nocancel.c (__read_nocancel): ... here.
* sysdeps/mach/hurd/Makefile (sysdep_routines): Add read_nocancel and
pread64_nocancel.
* sysdeps/mach/hurd/not-cancel.h (__read_nocancel, __pread64_nocancel):
Replace macros with prototypes with a hidden proto on libc.
* sysdeps/mach/hurd/dl-sysdep.c: Include <not-cancel.h>.
(__pread64_nocancel): New alias, check that it is not hidden.
(__read_nocancel): New alias, check that it is not hidden.
* sysdeps/mach/hurd/Versions (libc.GLIBC_PRIVATE): Add __read_nocancel and
__pread64_nocancel.
(ld.GLIBC_2.1): Add __pread64.
(ld.GLIBC_PRIVATE): Add __read_nocancel and __pread64_nocancel.
* sysdeps/mach/hurd/i386/ld.abilist (__pread64): Add symbol.
* sysdeps/mach/hurd/i386/localplt.data (__read_nocancel, __pread64,
__pread64_nocancel): Add references.
* sysdeps/i386/htl/Makefile: New file.
* sysdeps/i386/htl/tcb-offsets.sym: New file.
* sysdeps/mach/hurd/i386/Makefile [setjmp] (gen-as-const-headers): Add
signal-defines.sym.
* sysdeps/mach/hurd/i386/____longjmp_chk.S: Include tcb-offsets.h.
(____longjmp_chk): Harmonize with i386's __longjmp. Clear SS_ONSTACK
when jumping off the alternate stack.
* sysdeps/mach/hurd/i386/__longjmp.S: New file.
This allows to reuse the storage after calling pthread_cond_destroy.
* sysdeps/htl/bits/types/struct___pthread_cond.h (__pthread_cond):
Replace unused struct __pthread_condimpl *__impl field with unsigned int
__wrefs.
(__PTHREAD_COND_INITIALIZER): Update accordingly.
* sysdeps/htl/pt-cond-timedwait.c (__pthread_cond_timedwait_internal):
Register as waiter in __wrefs field. On unregistering, wake any pending
pthread_cond_destroy.
* sysdeps/htl/pt-cond-destroy.c (__pthread_cond_destroy): Register wake
request in __wrefs.
* nptl/Makefile (tests): Move tst-cond20 tst-cond21 to...
* sysdeps/pthread/Makefile (tests): ... here.
* nptl/tst-cond20.c nptl/tst-cond21.c: Move to...
* sysdeps/pthread/tst-cond20.c sysdeps/pthread/tst-cond21.c: ... here.
This change makes it easier to set a breakpoint on these calls.
This also addresses the issue that including <ldsodefs.h> without
<unistd.h> does not result usable _dl_*printf macros because of the
use of the STD*_FILENO macros there.
(The private symbol for _dl_fatal_printf will go away again
once the exception handling implementation is unified between
libc and ld.so.)
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This was originally added to support binutils older than version
2.22:
<https://sourceware.org/ml/libc-alpha/2010-12/msg00051.html>
Since 2.22 is older than the minimum required binutils version
for building glibc, we no longer need this. (The changes do
not impact the statically linked startup code.)
For Linux glibc ports the __TIMESIZE == 64 ensures proper aliasing for
__clock_gettime64 (to __clock_gettime).
When __TIMESIZE != 64 (like ARM32, PPC) the glibc expects separate definition
of the __clock_gettime64.
The HURD port only provides __clock_gettime, so this patch adds
__clock_gettime64 as a tiny wrapper on it.
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
This function is defined in libc.so, and the dynamic loader calls
right after relocation has been finished, before any ELF constructors
or the preinit function is invoked. It is also used in the static
build for initializing parts of the static libc.
To locate __libc_early_init, a direct symbol lookup function is used,
_dl_lookup_direct. It does not search the entire symbol scope and
consults merely a single link map. This function could also be used
to implement lookups in the vDSO (as an optimization).
A per-namespace variable (libc_map) is added for locating libc.so,
to avoid repeated traversals of the search scope. It is similar to
GL(dl_initfirst). An alternative would have been to thread a context
argument from _dl_open down to _dl_map_object_from_fd (where libc.so
is identified). This could have avoided the global variable, but
the change would be larger as a result. It would not have been
possible to use this to replace GL(dl_initfirst) because that global
variable is used to pass the function pointer past the stack switch
from dl_main to the main program. Replacing that requires adding
a new argument to _dl_init, which in turn needs changes to the
architecture-specific libc.so startup code written in assembler.
__libc_early_init should not be used to replace _dl_var_init (as
it exists today on some architectures). Instead, _dl_lookup_direct
should be used to look up a new variable symbol in libc.so, and
that should then be initialized from the dynamic loader, immediately
after the object has been loaded in _dl_map_object_from_fd (before
relocation is run). This way, more IFUNC resolvers which depend on
these variables will work.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The POSIX waitid implementation is problematic in some ways:
- It emulates using waitpid, which default implementation calls
wait4 and wait4 returns ENOSYS as default.
- Also by using waitpid it does not allod support the WNOWAIT,
WEXITED, WSTOPPED, or WCONTINUED flag. With current POSIX
specification the flags are no longer marked as optional.
Also due BZ#23091 Hurd still uses the implementation, so it is moved
to as a Hurd arch-specific folder (with some minor cleanups).
Checked against a i686-gnu (run-built-tests=no)
The new type struct fd_to_filename makes the allocation of the
backing storage explicit.
Hurd uses /dev/fd, not /proc/self/fd.
Co-Authored-By: Paul Eggert <eggert@cs.ucla.edu>
Exporting functions and relying on symbol interposition from libc.so
makes the choice of implementation dependent on DT_NEEDED order, which
is not what some compiler drivers expect.
This commit replaces one magic mechanism (symbol interposition) with
another one (preprocessor-/compiler-based redirection). This makes
the hand-over from the minimal malloc to the full malloc more
explicit.
Removing the ABI symbols is backwards-compatible because libc.so is
always in scope, and the dynamic loader will find the malloc-related
symbols there since commit f0b2132b35
("ld.so: Support moving versioned symbols between sonames
[BZ #24741]").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
900778283a ("htl: make pthread_spin_lock really spin") made
pthread_spin_lock really spin and not block, but the current users of
__pthread_spin_lock were assuming that it blocks, i.e. they use it as a
lightweight mutex fitting in just one int.
__pthread_spin_wait provides that support back.
so it gets shared by nptl and htl. Also add htl versions of thrd_current and
thrd_yield.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The __suseconds64_t type is supposed to be the 64 bit type across all
architectures.
It would be mostly used internally in the glibc - however, when passed to
Linux kernel (very unlikely), if necessary, it shall be converted to 32
bit type (i.e. __suseconds_t)
Build tests:
./src/scripts/build-many-glibcs.py glibcs
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Without a proper size, we get MACH_RCV_TOO_LARGE instead of MACH_MSG_SUCCESS.
* sysdeps/mach/hurd/setitimer.c (timer_thread): Add return_code_type
field to received message, and set the receive size in __mach_msg call.
As explained on
https://sourceware.org/ml/libc-alpha/2020-01/msg00049.html
the presence of __errno_location in libpthread.so on GNU/Linux makes
libpthread getting linked in for libstdc++. This aligns on that behavior, to
avoid issues that only GNU/Hurd would get.
This adds _hurd_sigstate_set_global_rcv used by libpthread to enable
POSIX-confirming behavior of signals on a per-thread basis.
This also provides a sigstate destructor _hurd_sigstate_delete, and a
global process signal state, which needs to be locked and check when
global disposition is enabled, thus the addition of _hurd_sigstate_lock
_hurd_sigstate_actions _hurd_sigstate_pending _hurd_sigstate_unlock helpers.
This also updates all the glibc code accordingly.
This also drops support for get_int(INIT_SIGMASK), which did not make sense
any more since we do not have a single signal thread any more.
During fork/spawn, this also reinitializes the child global sigstate's
lock. That cures an issue that would very rarely cause a deadlock in the
child in fork, tries to unlock ss' critical section lock at the end of
fork. This will typically (always?) be observed in /bin/sh, which is not
surprising as that is the foremost caller of fork.
To reproduce an intermediate state, add an endless loop if
_hurd_global_sigstate is locked after __proc_dostop (cast through
volatile); that is, while still being in the fork's parent process.
When that triggers (use the libtool testsuite), the signal thread has
already locked ss (which is _hurd_global_sigstate), and is stuck at
hurdsig.c:685 in post_signal, trying to lock _hurd_siglock (which the
main thread already has locked and keeps locked until after
__task_create). This is the case that ss->thread == MACH_PORT_NULL, that
is, a global signal. In the main thread, between __proc_dostop and
__task_create is the __thread_abort call on the signal thread which would
abort any current kernel operation (but leave ss locked). Later in fork,
in the parent, when _hurd_siglock is unlocked in fork, the parent's
signal thread can proceed and will unlock eventually the global sigstate.
In the client, _hurd_siglock will likewise be unlocked, but the global
sigstate never will be, as the client's signal thread has been configured
to restart execution from _hurd_msgport_receive. Thus, when the child
tries to unlock ss' critical section lock at the end of fork, it will
first lock the global sigstate, will spin trying to lock it, which can
never be successful, and we get our deadlock.
Options seem to be:
* Move the locking of _hurd_siglock earlier in post_signal -- but that
may generally impact performance, if this locking isn't generally
needed anyway?
On the other hand, would it actually make sense to wait here until we
are not any longer in a critical section (which is meant to disable
signal delivery anyway (but not for preempted signals?))?
* Clear the global sigstate in the fork's child with the rationale that
we're anyway restarting the signal thread from a clean state. This
has now been implemented.
Why has this problem not been observed before Jérémie's patches? (Or has
it? Perhaps even more rarely?) In _S_msg_sig_post, the signal is now
posted to a *global receiver thread*, whereas previously it was posted to
the *designated signal-receiving thread*. The latter one was in a
critical section in fork, so didn't try to handle the signal until after
leaving the critical section? (Not completely analyzed and verified.)
Another question is what the signal is that is being received
during/around the time __proc_dostop executes.
Adapted from the Linux x86 functions.
Not thoroughly tested, but manual testing as well as glibc tests look fine, and
manual -lpthread testing also looks fine (within the given bounds for a new
stack to be used with makecontext).
This has also been in use in Debian since 2013.
After commit f7649d5780 ("dlopen: Do not
block signals"), the dynamic linker no longer uses sigprocmask, which
means that it does not have to be made available explicitly on hurd.
This reverts commit 892badc9bb
("hurd: Make __sigprocmask GLIBC_PRIVATE") and commit
d5ed9ba29a ("hurd: Fix ld.so link"),
but keeps the comment changes from the second commit.
* sysdeps/mach/hurd/getrandom.c (__getrandom): Open the random source
with O_NONBLOCK when the GRND_NONBLOCK flag is provided.
Message-Id: <20191217182929.90989-1-jrtc27@jrtc27.com>
Not only libc/rtld use __close_nocancel_nostatus.
* sysdeps/mach/hurd/Makefile [$(subdir) == io] (sysdep_routines): Add
close_nocancel_nostatus.
* sysdeps/mach/hurd/Versions (libc): Add __close_nocancel_nostatus to
GLIBC_PRIVATE.
* sysdeps/mach/hurd/not-cancel.h (__close_nocancel_nostatus): Declare
function instead of defining inline.
[IS_IN (libc) || IS_IN (rtld)] (__close_nocancel_nostatus): Make
function hidden.
* sysdeps/mach/hurd/close_nocancel_nostatus.c: New file.
* sysdeps/mach/hurd/i386/trampoline.c (_hurd_setup_sighandler): Always check
for interrupted code being with esp pointing at mach_msg arguments, even
when using an altstack. If we need to abort the RPC we will need
this.
ld.so symbols to be overriden by libc need to be extern to really get
overriden. __access happens to have never been exposed, putting it to
GLIBC_PRIVATE.
ld.so symbols to be overriden by libc need to be extern to really get
overriden. __getcwd happens to have never been exposed, putting it to
GLIBC_PRIVATE.
The trampoline code should really be rewritten in assembler because
this is all very undefined at the C level.
Change-Id: Ided58244ca0ee48892519faac5ac222a4e02dec4
They cause a check-localplt failure after commit f9a7554009.
Fixes: f9a7554009
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Change-Id: I37bc20f3449b9e358f32879ed231720c969965b4
The generic version is straightforward. For Hurd, its nanosleep
implementation is moved to clock_nanosleep with adjustments from
generic unix implementation.
The generic clock_nanosleep unix version is also removed since
it calls nanosleep.
Checked on x86_64-linux-gnu and powerpc64le-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Consolidate generic gettimeofday implementation to use clock_gettime.
Linux ports that still provide gettimeofday through vDSO are not
changed.
Remove sysdeps/unix/clock_gettime.c, which implemented clock_gettime
using gettimeofday; new OS ports must provide a real implementation of
clock_gettime.
Rename sysdeps/mach/gettimeofday.c to sysdeps/mach/clock_gettime.c and
convert into an implementation of clock_gettime. It only supports
CLOCK_REALTIME; Mach does not appear to have any support for monotonic
clocks. It uses __host_get_time, which provides at best microsecond
resolution. Hurd is currently using sysdeps/posix/clock_getres.c for
clock_getres; its output for CLOCK_REALTIME is based on
sysconf (_SC_CLK_TCK), and I do not know whether that gives the
correct result.
Unlike settimeofday, there are no known uses of gettimeofday's
vestigial "get time zone" feature that are not bugs. (The per-process
timezone support in localtime and friends is unrelated, and the
programs that set the kernel's offset between the hardware clock and
UTC do not need to read it back.) Therefore, this feature is dummied
out. Henceforth, if gettimeofday's "struct timezone" argument is not
NULL, it will write zeroes to both fields. Any program that is
actually looking at this data will thus think it is running in UTC,
which is probably more correct than whatever it was doing before.
[__]gettimeofday no longer has any internal callers, so we can now
remove its internal prototype and PLT bypass aliases. The
__gettimeofday@GLIBC_2.0 export remains, in case it is used by any
third-party code.
It also allows to simplify the arch-specific implementation on x86 and
powerpc to remove the hack to disable the internal route to non iFUNC
variant for internal symbol.
This patch also fixes a missing optimization on aarch64, powerpc, and
x86 where the code used on static build do not use the vDSO.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu.
Co-authored-by: Zack Weinberg <zackw@panix.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Unconditionally, on all ports, use clock_settime to implement
settimeofday. Remove sysdeps/unix/clock_settime.c, which implemented
clock_settime by calling settimeofday; new OS ports must henceforth
provide a real implementation of clock_settime.
Hurd had a real implementation of settimeofday but not of
clock_settime; this patch converts it into an implementation of
clock_settime. It only supports CLOCK_REALTIME and microsecond
resolution; Hurd/Mach does not appear to have any support for
finer-resolution clocks.
The vestigial "set time zone" feature of settimeofday complicates the
generic settimeofday implementation a little. The only remaining uses
of this feature that aren't just bugs, are using it to inform the
Linux kernel of the offset between the hardware clock and UTC, on
systems where the hardware clock doesn't run in UTC (usually because
of dual-booting with Windows). There currently isn't any other way to
do this. However, the callers that do this call settimeofday with
_only_ the timezone argument non-NULL. Therefore, glibc's new
behavior is: callers of settimeofday must supply one and only one of
the two arguments. If both arguments are non-NULL, or both arguments
are NULL, the call fails and sets errno to EINVAL.
When only the timeval argument is supplied, settimeofday calls
__clock_settime(CLOCK_REALTIME), same as stime.
When only the timezone argument is supplied, settimeofday calls a new
internal function called __settimezone. On Linux, only, this function
will pass the timezone structure to the settimeofday system call. On
all other operating systems, and on Linux architectures that don't
define __NR_settimeofday, __settimezone is a stub that always sets
errno to ENOSYS and returns -1.
The settimeoday syscall is enabled on Linux by the flag
COMPAT_32BIT_TIME, which is an option to either 32-bits ABIs or COMPAT
builds (defined usually by 64-bit kernels that want to support 32-bit
ABIs, such as x86). The idea to future 64-bit time_t only ABIs
is to not provide settimeofday syscall.
The same semantics are implemented for Linux/Alpha's GLIBC_2.0 compat
symbol for settimeofday.
There are no longer any internal callers of __settimeofday, so the
internal prototype is removed.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Since gettimeofday will shortly be implemented in terms of
clock_gettime on all platforms, internal code should use clock_gettime
directly; in addition to removing a layer of indirection, this will
allow us to remove the PLT-bypass gunk for gettimeofday. (We can't
quite do that yet, but it'll be coming later in this patch series.)
In many cases, the changed code does fewer conversions.
The changed code always assumes __clock_gettime (CLOCK_REALTIME)
cannot fail. Most of the call sites were assuming gettimeofday could
not fail, but a few places were checking for errors. POSIX says
clock_gettime can only fail if the clock constant is invalid or
unsupported, and CLOCK_REALTIME is the one and only clock constant
that's required to be supported. For consistency I grepped the entire
source tree for any other places that checked for errors from
__clock_gettime (CLOCK_REALTIME), found one, and changed it too.
(For the record, POSIX also says gettimeofday can never fail.)
(It would be nice if we could declare that GNU systems will always
support CLOCK_MONOTONIC as well as CLOCK_REALTIME; there are several
places where we are using CLOCK_REALTIME where _MONOTONIC would be
more appropriate, and/or trying to use _MONOTONIC and then falling
back to _REALTIME. But the Hurd doesn't support CLOCK_MONOTONIC yet,
and it looks like adding it would involve substantial changes to
gnumach's internals and API. Oh well.)
A few Hurd-specific files were changed to use __host_get_time instead
of __clock_gettime, as this seemed tidier. We also assume this cannot
fail. Skimming the code in gnumach leads me to believe the only way
it could fail is if __mach_host_self also failed, and our
Hurd-specific code consistently assumes that can't happen, so I'm
going with that.
With the exception of support/support_test_main.c, test cases are not
modified, mainly because I didn't want to have to figure out which
test cases were testing gettimeofday specifically.
The definition of GETTIME in sysdeps/generic/memusage.h had a typo and
was not reading tv_sec at all. I fixed this. It appears nobody has been
generating malloc traces on a machine that doesn't have a superseding
definition.
There are a whole bunch of places where the code could be simplified
by factoring out timespec subtraction and/or comparison logic, but I
want to keep this patch as mechanical as possible.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
The valid_nanoseconds () static inline function has been introduced to
check if nanoseconds value is in the correct range - greater or equal to
zero and less than 1000000000.
The explicit #include <time.h> has been added to files where it was
missing.
The __syscall_slong_t type for ns has been used to avoid issues on x32.
Tested with:
- scripts/build-many-glibcs.py
- make PARALLELMFLAGS="-j12" && make PARALLELMFLAGS="-j12" xcheck on x86_64
Add a new macro __STATFS_MATCHES_STATFS64 that specifies if fsblkcnt_t
matches fsblkcnt64_t and if fsfilcnt_t matches fsfilcnt64_t.
As we don't have the padding we also need to update the overflow checker
to not access the undefined members.
Commit 95c1056962 ("elf: Use nocancel
pread64() instead of lseek()+read()") added calls to __pread64 to
the dynamic loader. On Hurd, this needs an implementation in the
dynamic loader because the rtld-pread64 rebuild pulls in too many
symbols.
Fixes: 95c1056962
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
In glibc 2.17, the functions clock_getcpuclockid, clock_getres,
clock_gettime, clock_nanosleep, and clock_settime were moved from
librt.so to libc.so, leaving compatibility stubs behind. Now that the
dynamic linker no longer insists on finding versioned symbols in the
same library that originally defined them, we do not need the stubs
anymore, and this means we don't need GLIBC_PRIVATE __-prefix aliases
for most of the functions anymore either. (clock_gettime still needs
one.) For ports added before 2.17, libc.so needs to provide two
symbol versions for each, the default at GLIBC_2.17 plus a compat
version matching what librt had.
While I'm at it, move the clock_*.c files and their tests from rt/ to
time/.
* sysdeps/mach/hurd/i386/sigreturn.c (__sigreturn2): New function,
unlocks SS and returns to the saved PC.
(__sigreturn): Do not unlock SS, and "return" into __sigreturn2 on the
thread stack instead of the saved PC.
Optimizing anonymous maps brings bugs, and does not optimize much anyway.
[BZ #19903]
* sysdeps/mach/hurd/mmap.c (__mmap): Remove optimizing anonymous maps
as __vm_allocate.
To be efficient, the remap translator simply returns ports from the underlying
filesystem, and thus the root directory found through browsing '..' is the
underlying root, not the remap root. This should not be a reason for getcwd to
fail.
* sysdeps/mach/hurd/getcwd.c (_hurd_canonicalize_directory_name_internal): Do
not remove the heading slash if we got an unknown root directory.
(__getcwd): Do not fail with EGRATUITOUS if we got an unknown root directory.
The preemptor sigcode doesn't match since the POSIX sigcode SI_TIMER is
used when SIGALRM is sent. In addition, The inline version of
hurd_preempt_signals doesn't update _hurdsig_preempted_set. For these
reasons, the preemptor would be skipped by post_signal.
* sysdeps/mach/hurd/setitimer.c (setitimer_locked): Fix preemptor setup.
This patch refactor sigcontextinfo.h header to use SA_SIGINFO as default
for both gmon and debug implementations. This allows simplify
profil-counter.h on Linux to use a single implementation and remove the
requirements for newer ports to redefine __sigaction/sigaction to use
SA_SIGINFO.
The GET_PC macro is also replaced with a function sigcontext_get_pc that
returns an uintptr_t instead of a void pointer. It allows easier convertion
to integer on ILP32 architecture, such as x32, without the need to suppress
compiler warnings.
The patch also requires some refactor of register-dump.h file for some
architectures (to reflect it is now called from a sa_sigaction instead of
sa_handler signal context).
- Alpha, i386, and s390 are straighfoward to take in consideration the
new argument type.
- ia64 takes in consideration the kernel pass a struct sigcontextt
as third argument for sa_sigaction.
- sparc take in consideration the kernel pass a pt_regs struct
as third argument for sa_sigaction.
- m68k dummy function is removed and the FP state is dumped on
register_dump itself.
- For SH the register-dump.h file is consolidate on a common implementation
and the floating-point state is checked based on ownedfp field.
The register_dump does not change its output format in any affected
architecture.
I checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu,
arm-linux-gnueabihf, sparcv9-linux-gnu, sparc64-linux-gnu, powerpc-linux-gnu,
powerpc64-linux-gnu, and powerpc64le-linux-gnu.
I also checked the libSegFault.so through catchsegv on alpha-linux-gnu,
m68k-linux-gnu and sh4-linux-gnu to confirm the output has not changed.
Adhemerval Zanella <adhemerval.zanella@linaro.org>
Florian Weimer <fweimer@redhat.com>
* debug/segfault.c (install_handler): Use SA_SIGINFO if defined.
* sysdeps/generic/profil-counter.h (__profil_counter): Cast to
uintptr_t.
* sysdeps/generic/sigcontextinfo.h (GET_PC): Rename to
sigcontext_get_pc and return aligned cast to uintptr_t.
* sysdeps/mach/hurd/i386/sigcontextinfo.h (GET_PC): Likewise.
* sysdeps/posix/profil.c (profil_count): Change PC argument to
uintptr_t.
(__profil): Use SA_SIGINFO.
* sysdeps/posix/sprofil.c (profil_count): Change PCP argument to
uintptr_t.
(__sprofil): Use SA_SIGINFO.
* sysdeps/unix/sysv/linux/profil-counter.h: New file.
* sysdeps/unix/sysv/linux/aarch64/profil-counter.h: Remove file.
* sysdeps/unix/sysv/linux/csky/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/hppa/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/i386/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/ia64/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/microblaze/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/mips/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/nios2/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/x86_64/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/riscv/profil-counter.h: Likewise.
* sysdeps/sysv/linux/s390/s390-32/profil-counter.h: Likewise.
* sysdeps/sysv/linux/s390/s390-64/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/sh/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/arm/profil-counter.h (__profil_counter):
Assume SA_SIGINFO and use sigcontext_get_pc instead of GET_PC.
* sysdeps/unix/sysv/linux/sparc/profil-counter.h: New file.
* sysdeps/unix/sysv/linux/sparc/sparc64/profil-counter.h: Remove file.
* sysdeps/unix/sysv/linux/sparc/sparc32/profil-counter.h: Likewise.
* sysdpes/unix/sysv/linux/aarch64/sigcontextinfo.h (SIGCONTEXT,
GET_PC, __sigaction, sigaction): Remove defines.
(sigcontext_get_pc): New function.
* sysdeps/unix/sysv/linux/alpha/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/arm/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/csky/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/hppa/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/i386/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/ia64/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/m68k/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/mips/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/nios2/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/s390/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/microblaze/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/riscv/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/sh/sigcontextinfo.h: Likewise.
* sysdeps/sysv/linux/sparc/sparc32/sigcontextinfo.h: Likewise.
* sysdeps/sysv/linux/sparc/sparc64/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/x86_64/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/alpha/register-dump.h (register_dump):
Handle CTX argument as ucontext_t.
* sysdeps/unix/sysv/linux/i386/register-dump.h: Likewise.
Likewise.
* sysdeps/unix/sysv/linux/m68k/register-dump.h: Likewise.
* sysdeps/sysv/linux/s390/s390-32/register-dump.h: Likewise.
* sysdeps/sysv/linux/s390/s390-64/register-dump.h: Likewise.
* sysdeps/unix/sysv/linux/sh/register-dump.h: New file.
* sysdeps/unix/sysv/linux/sh/sh4/register-dump.h: Remove File.
* sysdeps/unix/sysv/linux/sh/sh3/register-dump.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/register-dump.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/register-dump.h: Likewise.
* sysdeps/unix/sysv/linux/Makefile (tests-internal): Add
tst-sigcontextinfo-get_pc.
* sysdeps/unix/sysv/linux/tst-sigcontextinfo-get_pc.c: New file.
(CFLAGS-tst-sigcontextinfo-get_pc.c): New rule.
It doesn't make sense to remove all the internal uses of time.
It's still a standard ISO C function, and its callers don't need
sub-second resolution and would be unnecessarily complicated if
they had to declare a struct timespec instead of just a time_t.
However, a handful of places were using the vestigial "result"
argument instead of the return value, which is slightly less
efficient and also looks strange. Correct this.
* misc/syslog.c (__vsyslog_internal)
* time/getdate.c (__getdate_r)
* time/tst_wcsftime.c (main):
Use return value of time, not its argument.
* string/strfry.c (strfry)
* sysdeps/mach/sleep.c (__sleep):
Remove unnecessary casts of NULL in calls to time.
The resolution of C floating-point Clarification Request 25
<http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2397.htm#dr_25> is
that the totalorder and totalordermag functions should take pointer
arguments, and this has been adopted in C2X (with const added; note
that the integration of this change into C2X is present in the C
standard git repository but postdates the most recent public PDF
draft).
This patch updates glibc accordingly. As a defect resolution, the API
is changed unconditionally rather than supporting any sort of TS
18661-1 mode for compilation with the old version of the API. There
are compat symbols for existing binaries that pass floating-point
arguments directly. As a consequence of changing to pointer
arguments, there are no longer type-generic macros in tgmath.h for
these functions.
Because of the fairly complicated logic for creating libm function
aliases and determining the set of aliases to create in a given glibc
configuration, rather than duplicating all that in individual source
files to create the versioned and compat symbols, the source files for
the various versions of totalorder functions are set up to redefine
weak_alias before using libm_alias_* macros to create the symbols
required. In turn, this requires creating a separate alias for each
symbol version pointing to the same implementation (see binutils bug
<https://sourceware.org/bugzilla/show_bug.cgi?id=23840>), which is
done automatically using __COUNTER__. (As I noted in
<https://sourceware.org/ml/libc-alpha/2018-10/msg00631.html>, it might
well make sense for glibc's symbol versioning macros to do that alias
creation with __COUNTER__ themselves, which would somewhat simplify
the logic in the totalorder source files.)
It is of course desirable to test the compat symbols. I did this with
the generic libm-test machinery, but didn't wish to duplicate the
actual tables of test inputs and outputs, and thought it risky to
attempt to have a single object file refer to both default and compat
versions of the same function in order to test them together. Thus, I
created libm-test-compat_totalorder.inc and
libm-test-compat_totalordermag.inc which include the generated .c
files (with the processed version of those tables of inputs) from the
non-compat tests, and added appropriate dependencies. I think this
provides sufficient test coverage for the compat symbols without also
needing to make the special ldbl-96 and ldbl-128ibm tests (of
peculiarities relating to the representations of those formats that
can't be covered in the generic tests) run for the compat symbols.
Tests of compat symbols need to be internal tests, meaning _ISOMAC is
not defined. Making some libm-test tests into internal tests showed
up two other issues. GCC diagnoses duplicate macro definitions of
__STDC_* macros, including __STDC_WANT_IEC_60559_TYPES_EXT__; I added
an appropriate conditional and filed
<https://gcc.gnu.org/bugzilla/show_bug.cgi?id=91451> for this issue.
On ia64, include/setjmp.h ends up getting included indirectly from
libm-symbols.h, resulting in conflicting definitions of the STR macro
(also defined in libm-test-driver.c); I renamed the macros in
include/setjmp.h. (It's arguable that we should have common internal
headers used everywhere for stringizing and concatenation macros.)
Tested for x86_64 and x86, and with build-many-glibcs.py.
* math/bits/mathcalls.h
[__GLIBC_USE (IEC_60559_BFP_EXT) || __MATH_DECLARING_FLOATN]
(totalorder): Take pointer arguments.
[__GLIBC_USE (IEC_60559_BFP_EXT) || __MATH_DECLARING_FLOATN]
(totalordermag): Likewise.
* manual/arith.texi (totalorder): Likewise.
(totalorderf): Likewise.
(totalorderl): Likewise.
(totalorderfN): Likewise.
(totalorderfNx): Likewise.
(totalordermag): Likewise.
(totalordermagf): Likewise.
(totalordermagl): Likewise.
(totalordermagfN): Likewise.
(totalordermagfNx): Likewise.
* math/tgmath.h (__TGMATH_BINARY_REAL_RET_ONLY): Remove macro.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (totalordermag): Likewise.
* math/Versions (GLIBC_2.31): Add totalorder, totalorderf,
totalorderl, totalordermag, totalordermagf, totalordermagl,
totalorderf32, totalorderf64, totalorderf32x, totalordermagf32,
totalordermagf64, totalordermagf32x, totalorderf64x,
totalordermagf64x, totalorderf128 and totalordermagf128.
* math/Makefile (libm-test-funcs-noauto): Add compat_totalorder
and compat_totalordermag.
(libm-test-funcs-compat): New variable.
(libm-tests-compat): Likewise.
(tests): Do not include compat tests.
(tests-internal): Add compat tests.
($(foreach t,$(libm-tests-base),
$(objpfx)$(t)-compat_totalorder.o)): Depend
on $(objpfx)libm-test-totalorder.c.
($(foreach t,$(libm-tests-base),
$(objpfx)$(t)-compat_totalordermag.o): Depend on
$(objpfx)libm-test-totalordermag.c.
(tgmath3-macros): Remove totalorder and totalordermag.
* math/libm-test-compat_totalorder.inc: New file.
* math/libm-test-compat_totalordermag.inc: Likewise.
* math/libm-test-driver.c (struct test_ff_i_data): Update comment.
(RUN_TEST_fpfp_b): New macro.
(RUN_TEST_LOOP_fpfp_b): Likewise.
* math/libm-test-totalorder.inc (totalorder_test_data): Use
TEST_fpfp_b.
(totalorder_test): Condition on [!COMPAT_TEST].
(do_test): Likewise.
* math/libm-test-totalordermag.inc (totalordermag_test_data): Use
TEST_fpfp_b.
(totalordermag_test): Condition on [!COMPAT_TEST].
(do_test): Likewise.
* math/gen-tgmath-tests.py (Tests.add_all_tests): Remove
totalorder and totalordermag.
* math/test-tgmath.c (NCALLS): Change to 132.
(F(compile_test)): Do not call totalorder or totalordermag.
(F(totalorder)): Remove.
(F(totalordermag)): Likewise.
* include/float.h (__STDC_WANT_IEC_60559_TYPES_EXT__): Do not
define if [__STDC_WANT_IEC_60559_TYPES_EXT__].
* include/setjmp.h [!_ISOMAC] (STR_HELPER): Rename to
SJSTR_HELPER.
[!_ISOMAC] (STR): Rename to SJSTR. Update call to STR_HELPER.
[!_ISOMAC] (TEST_SIZE): Update call to STR.
[!_ISOMAC] (TEST_ALIGN): Likewise.
[!_ISOMAC] (TEST_OFFSET): Likewise.
* sysdeps/ieee754/dbl-64/s_totalorder.c: Include <shlib-compat.h>
and <first-versions.h>.
(__totalorder): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/dbl-64/s_totalordermag.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermag): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalorder): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/dbl-64/wordsize-64/s_totalordermag.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermag): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/float128/float128_private.h
(__totalorder_compatl): New macro.
(__totalordermag_compatl): Likewise.
* sysdeps/ieee754/flt-32/s_totalorderf.c: Include <shlib-compat.h>
and <first-versions.h>.
(__totalorderf): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/flt-32/s_totalordermagf.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermagf): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/ldbl-128/s_totalorderl.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalorderl): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/ldbl-128/s_totalordermagl.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermagl): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/ldbl-128ibm/s_totalorderl.c: Include
<shlib-compat.h>.
(__totalorderl): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/ldbl-128ibm/s_totalordermagl.c: Include
<shlib-compat.h>.
(__totalordermagl): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/ldbl-96/s_totalorderl.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalorderl): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/ldbl-96/s_totalordermagl.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermagl): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/ldbl-opt/nldbl-totalorder.c (totalorderl): Take
pointer arguments.
* sysdeps/ieee754/ldbl-opt/nldbl-totalordermag.c (totalordermagl):
Likewise.
* sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c
(do_test): Update calls to totalorderl and totalordermagl.
* sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c (do_test):
Update calls to totalorderl and totalordermagl.
* sysdeps/mach/hurd/i386/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/csky/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
The twalk function is very difficult to use in a multi-threaded
program because there is no way to pass external state to the
iterator function.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch removes CLOCK_THREAD_CPUTIME_ID and CLOCK_PROCESS_CPUTIME_ID support
from clock_gettime and clock_settime generic implementation. For Linux, kernel
already provides supports through the syscall and Hurd HTL lacks
__pthread_clock_gettime and __pthread_clock_settime internal implementation.
As described in clock_gettime man-page [1] on 'Historical note for SMP
system', implementing CLOCK_{THREAD,PROCESS}_CPUTIME_ID with timer registers
is error-prone and susceptible to timing and accurary issues that the libc
can not deal without kernel support.
This allows removes unused code which, however, still incur in some runtime
overhead in thread creation (the struct pthread cpuclock_offset
initialization).
If hurd eventually wants to support them it should either either implement as
a kernel facility (or something related due its architecture) or in system
specific implementation.
Checked on aarch64-linux-gnu, x86_64-linux-gnu, and i686-linux-gnu. I also
checked on a i686-gnu build.
* nptl/Makefile (libpthread-routines): Remove pthread_clock_gettime and
pthread_clock_settime.
* nptl/pthreadP.h (__find_thread_by_id): Remove prototype.
* elf/dl-support.c [!HP_TIMING_NOAVAIL] (_dl_cpuclock_offset): Remove.
(_dl_non_dynamic_init): Remove _dl_cpuclock_offset setting.
* elf/rtld.c (_dl_start_final): Likewise.
* nptl/allocatestack.c (__find_thread_by_id): Remove function.
* sysdeps/generic/ldsodefs.h [!HP_TIMING_NOAVAIL] (_dl_cpuclock_offset):
Remove.
* sysdeps/mach/hurd/dl-sysdep.c [!HP_TIMING_NOAVAIL]
(_dl_cpuclock_offset): Remove.
* nptl/descr.h (struct pthread): Rename cpuclock_offset to
cpuclock_offset_ununsed.
* nptl/nptl-init.c (__pthread_initialize_minimal_internal): Remove
cpuclock_offset set.
* nptl/pthread_create.c (START_THREAD_DEFN): Likewise.
* sysdeps/nptl/fork.c (__libc_fork): Likewise.
* nptl/pthread_clock_gettime.c: Remove file.
* nptl/pthread_clock_settime.c: Likewise.
* sysdeps/unix/clock_gettime.c (hp_timing_gettime): Remove function.
[HP_TIMING_AVAIL] (realtime_gettime): Remove CLOCK_THREAD_CPUTIME_ID
and CLOCK_PROCESS_CPUTIME_ID support.
* sysdeps/unix/clock_settime.c (hp_timing_gettime): Likewise.
[HP_TIMING_AVAIL] (realtime_gettime): Likewise.
* sysdeps/posix/clock_getres.c (hp_timing_getres): Likewise.
[HP_TIMING_AVAIL] (__clock_getres): Likewise.
* sysdeps/unix/clock_nanosleep.c (CPUCLOCK_P, INVALID_CLOCK_P):
Likewise.
(__clock_nanosleep): Remove CPUCLOCK_P and INVALID_CLOCK_P usage.
[1] http://man7.org/linux/man-pages/man2/clock_gettime.2.html
Mach does not support IP_RECVERR, so replace this function with a
stub in a sysdeps override for Hurd.
This fixes commit 08504de718
("resolv: Enable full ICMP errors for UDP DNS sockets [BZ #24047]").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This patch fixes further coding style issues where code should have
broken lines before operators in accordance with the GNU Coding
Standards but instead was breaking lines after them.
Tested for x86_64, and with build-many-glibcs.py.
* stdio-common/vfscanf-internal.c (ARG): Break lines before rather
than after operators.
* sysdeps/mach/hurd/setitimer.c (timer_thread): Likewise.
(setitimer_locked): Likewise.
* sysdeps/mach/hurd/sigaction.c (__sigaction): Likewise.
* sysdeps/mach/hurd/sigaltstack.c (__sigaltstack): Likewise.
* sysdeps/mach/pagecopy.h (PAGE_COPY_FWD): Likewise.
* sysdeps/mach/thread_state.h (machine_get_basic_state): Likewise.
* sysdeps/powerpc/powerpc64/tst-ucontext-ppc64-vscr.c
(PPC_CPU_SUPPORTED): Likewise.
* sysdeps/unix/sysv/linux/alpha/a.out.h (N_TXTOFF): Likewise.
* sysdeps/unix/sysv/linux/generic/wordsize-32/overflow.h
(stat_overflow): Likewise.
(statfs_overflow): Likewise.
* sysdeps/unix/sysv/linux/tst-personality.c (do_test): Likewise.
* sysdeps/unix/sysv/linux/tst-ttyname.c (eq_ttyname): Likewise.
(eq_ttyname_r): Likewise.
(run_chroot_tests): Likewise.
This patch fixes -Wimplicit-fallthrough warnings in system-specific
code that show up building glibc with -Wextra, by adding fall-through
comments, or moving existing such comments to the place required for
them to work (immediately before the case label being fallen through).
Tested with build-many-glibcs.py.
* sysdeps/i386/dl-machine.h (elf_machine_rela): Add fall-through
comments.
* sysdeps/m68k/m680x0/fpu/s_cexp_template.c (s(__cexp)): Likewise.
* sysdeps/m68k/memcopy.h (WORD_COPY_FWD): Likewise.
(WORD_COPY_BWD): Likewise.
* sysdeps/mach/hurd/ioctl.c (__ioctl): Likewise.
* sysdeps/powerpc/powerpc64/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/s390/iso-8859-1_cp037_z900.c (TR_LOOP): Likewise.
* sysdeps/mips/dl-machine.h (elf_machine_reloc): Move fall-through
comment.
* sysdeps/mips/dl-trampoline.c (__dl_runtime_resolve): Likewise.
GCC mainline now gives errors for an asm that clobbers the stack
pointer. According to
<https://gcc.gnu.org/ml/gcc-patches/2018-12/msg00932.html> GCC
previously ignored such a clobber; thus, this patch removes it from
_hurd_stack_setup.
Tested with build-many-glibcs.py for i686-gnu.
* sysdeps/mach/hurd/i386/init-first.c (_hurd_stack_setup): Do not
clobber sp.
Along with posix_spawn_file_actions_addchdir,
posix_spawn_file_actions_addfchdir is the subject of a change proposal
for POSIX: <http://austingroupbugs.net/view.php?id=1208>
The logic for generating sysdeps/mach/hurd/bits/errno.h involves a
stamp file and $(move-if-change).
The temporary file (generated unconditionally) is generated in the
source directory. This means that even if
sysdeps/mach/hurd/bits/errno.h is up to date, and has an up to date
timestamp, the build will fail if the source directory is read-only.
Even with a writable source directory, multiple concurrent builds for
i686-gnu with the same source directory could race to access the
temporary file (which always has the same name).
This patch uses the build directory for the temporary file instead to
avoid those problems. (In the case where the file is out of date and
the temporary file does need to be moved to the source directory, if
there are multiple concurrent builds for i686-gnu with the same source
directory, and the source and build directories are on different
filesystems, it's possible there might still be races replacing the
file in the source directory, depending on exactly how mv handles such
cross-filesystem moves. This is certainly no worse than the present
situation, where such a case would have races regardless of whether
the file is out of date or whether different filesystems are in use.)
Tested with a build-many-glibcs.py build for i686-gnu.
* sysdeps/mach/hurd/Makefile ($(common-objpfx)stamp-errnos): Use
$(hurd-objpfx)bits/errno.h-tmp, not $(hurd)/bits/errno.h-tmp.
Introduce new pow symbol version that doesn't do SVID compatible error
handling. The standard errno and fp exception based error handling is
inline in the new code and does not have significant overhead.
The wrapper is disabled for sysdeps/ieee754/dbl-64 by using empty
w_pow.c and enabled for targets with their own pow implementation or
ifunc dispatch on __ieee754_pow by including math/w_pow.c.
The compatibility symbol version still uses the wrapper with SVID error
handling around the new code. There is no new symbol version nor
compatibility code on !LIBM_SVID_COMPAT targets (e.g. riscv).
On targets where previously powl was an alias of pow, now it points to
the compatibility symbol with the wrapper, because it still need the
SVID compatible error handling. This affects NO_LONG_DOUBLE (e.g. arm)
and LONG_DOUBLE_COMPAT (e.g. alpha) targets as well.
The __pow_finite symbol is now an alias of pow. Both __pow_finite and
pow set errno and thus not const functions.
The ia64 asm is changed so the compat and new symbol versions map to the
same address.
On x86_64 #include <math.h> was added before macro definitions that
may affect that header.
Tested with build-many-glibcs.py.
* math/Versions (GLIBC_2.29): Add pow.
* math/w_pow_compat.c (__pow_compat): Change to versioned compat
symbol.
* math/w_pow.c: New file.
* sysdeps/i386/fpu/w_pow.c: New file.
* sysdeps/ia64/fpu/e_pow.S: Add versioned symbols.
* sysdeps/ieee754/dbl-64/e_pow.c (__ieee754_pow): Rename to __pow
and add necessary aliases.
* sysdeps/ieee754/dbl-64/w_pow.c: New file.
* sysdeps/m68k/m680x0/fpu/w_pow.c: New file.
* sysdeps/mach/hurd/i386/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Update.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Update.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Update.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Update.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Update.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Update.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Update.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Update.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Update.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Update.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Update.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Update.
* sysdeps/x86_64/fpu/multiarch/e_pow-fma.c (__ieee754_pow): Rename to
__pow.
* sysdeps/x86_64/fpu/multiarch/e_pow-fma4.c (__ieee754_pow): Likewise.
* sysdeps/x86_64/fpu/multiarch/e_pow.c (__ieee754_pow): Likewise.
* sysdeps/x86_64/fpu/multiarch/w_pow.c: New file.
Introduce new log2 symbol version that doesn't do SVID compatible error
handling. The standard errno and fp exception based error handling is
inline in the new code and does not have significant overhead.
The wrapper is disabled for sysdeps/ieee754/dbl-64 by using empty
w_log2.c and enabled for targets with their own log2 implementation by
including math/w_log2.c.
The compatibility symbol version still uses the wrapper with SVID error
handling around the new code. There is no new symbol version nor
compatibility code on !LIBM_SVID_COMPAT targets (e.g. riscv).
On targets where previously log2l was an alias of log2, now it points to
the compatibility symbol with the wrapper, because it still need the
SVID compatible error handling. This affects NO_LONG_DOUBLE (e.g. arm)
and LONG_DOUBLE_COMPAT (e.g. alpha) targets as well.
The __log2_finite symbol is now an alias of log2. Both __log2_finite
and log2 set errno and thus not const functions.
The ia64 asm is changed so the compat and new symbol versions map to the
same address.
Tested with build-many-glibcs.py.
* math/Versions (GLIBC_2.29): Add log2.
* math/w_log2_compat.c (__log2_compat): Change to versioned compat
symbol.
* math/w_log2.c: New file.
* sysdeps/i386/fpu/w_log2.c: New file.
* sysdeps/ia64/fpu/e_log2.S: Add versioned symbols.
* sysdeps/ieee754/dbl-64/e_log2.c (__ieee754_log2): Rename to __log2
and add necessary aliases.
* sysdeps/ieee754/dbl-64/w_log2.c: New file.
* sysdeps/m68k/m680x0/fpu/w_log2.c: New file.
* sysdeps/mach/hurd/i386/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Update.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Update.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Update.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Update.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Update.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Update.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Update.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Update.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Update.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Update.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Update.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Update.
Introduce new log symbol version that doesn't do SVID compatible error
handling. The standard errno and fp exception based error handling is
inline in the new code and does not have significant overhead.
The wrapper is disabled for sysdeps/ieee754/dbl-64 by using empty
w_log.c and enabled for targets with their own log implementation by
including math/w_log.c.
The compatibility symbol version still uses the wrapper with SVID error
handling around the new code. There is no new symbol version nor
compatibility code on !LIBM_SVID_COMPAT targets (e.g. riscv).
On targets where previously logl was an alias of log, now it points to
the compatibility symbol with the wrapper, because it still need the
SVID compatible error handling. This affects NO_LONG_DOUBLE (e.g. arm)
and LONG_DOUBLE_COMPAT (e.g. alpha) targets as well.
The __log_finite symbol is now an alias of log. Both __log_finite and
log set errno and thus not const functions.
The ia64 asm is changed so the compat and new symbol versions map to the
same address.
On x86_64 #include <math.h> was added before macro definitions that may
affect that header.
Tested with build-many-glibcs.py.
* math/Versions (GLIBC_2.29): Add log.
* math/w_log_compat.c (__log_compat): Change to versioned compat
symbol.
* math/w_log.c: New file.
* sysdeps/i386/fpu/w_log.c: New file.
* sysdeps/ia64/fpu/e_log.S: Update.
* sysdeps/ieee754/dbl-64/e_log.c (__ieee754_log): Rename to __log
and add necessary aliases.
* sysdeps/ieee754/dbl-64/w_log.c: New file.
* sysdeps/m68k/m680x0/fpu/w_log.c: New file.
* sysdeps/mach/hurd/i386/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Update.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Update.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Update.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Update.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Update.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Update.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Update.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Update.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Update.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Update.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Update.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Update.
* sysdeps/x86_64/fpu/multiarch/e_log-avx.c (__ieee754_log): Rename to
__log.
* sysdeps/x86_64/fpu/multiarch/e_log-fma.c (__ieee754_log): Likewise.
* sysdeps/x86_64/fpu/multiarch/e_log-fma4.c (__ieee754_log): Likewise.
* sysdeps/x86_64/fpu/multiarch/e_log.c (__ieee754_log): Likewise.
* sysdeps/x86_64/fpu/multiarch/w_log.c: New file.
Introduce new exp and exp2 symbol version that don't do SVID compatible
error handling. The standard errno and fp exception based error handling
is inline in the new code and does not have significant overhead.
The double precision wrappers are disabled for sysdeps/ieee754/dbl-64
by using empty w_exp.c and w_exp2.c files, the math/w_exp.c and
math/w_exp2.c files use the wrapper template and can be included by
targets that have their own exp and exp2 implementations or use ifunc
on the glibc internal __ieee754_exp symbol.
The compatibility symbol versions still use the wrapper with SVID error
handling around the new code. There is no new symbol version nor
compatibility code on !LIBM_SVID_COMPAT targets (e.g. riscv).
On targets where previously expl and exp2l were aliases of exp and exp2,
now they point to the compatibility symbols with the wrapper, because
they still need the SVID compatible error handling. This affects
NO_LONG_DOUBLE (e.g arm) and LONG_DOUBLE_COMPAT (e.g. alpha) targets
as well.
The _finite symbols are now aliases of the standard symbols (they have
no performance advantage anymore). Both the standard symbols and
_finite symbols set errno and thus not const functions.
The ia64 asm is changed so the compat and new symbol versions map to the
same address.
On x86_64 #include <math.h> was added before macro definitions that may
affect that header (the new macro name is __exp instead of __ieee754_exp
which breaks some math.h macros).
Tested with build-many-glibcs.py.
* math/Versions (GLIBC_2.29): Add exp and exp2.
* math/w_exp2_compat.c (__exp2_compat): Change to versioned compat
symbol, handle NO_LONG_DOUBLE and LONG_DOUBLE_COMPAT explicitly.
* math/w_exp_compat.c (__exp_compat): Likewise.
* math/w_exp.c: New file.
* math/w_exp2.c: New file.
* sysdeps/i386/fpu/w_exp.c: New file.
* sysdeps/i386/fpu/w_exp2.c: New file.
* sysdeps/ia64/fpu/e_exp.S: Add versioned symbols.
* sysdeps/ia64/fpu/e_exp2.S: Likewise.
* sysdeps/ieee754/dbl-64/e_exp.c (__ieee754_exp): Rename to __exp
and add necessary aliases.
* sysdeps/ieee754/dbl-64/e_exp2.c (__ieee754_exp2): Rename to __exp2
and add necessary aliases.
* sysdeps/ieee754/dbl-64/w_exp.c: New file.
* sysdeps/ieee754/dbl-64/w_exp2.c: New file.
* sysdeps/m68k/m680x0/fpu/w_exp.c: New file.
* sysdeps/m68k/m680x0/fpu/w_exp2.c: New file.
* sysdeps/mach/hurd/i386/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Update.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Update.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Update.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Update.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Update.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Update.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Update.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Update.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Update.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Update.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Update.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Update.
* sysdeps/x86_64/fpu/multiarch/e_exp-avx.c (__exp1): Remove.
(__ieee754_exp): Rename to __exp.
* sysdeps/x86_64/fpu/multiarch/e_exp-fma.c (__exp1): Remove.
(__ieee754_exp): Rename to __exp.
* sysdeps/x86_64/fpu/multiarch/e_exp-fma4.c (__exp1): Remove.
(__ieee754_exp): Rename to __exp.
* sysdeps/x86_64/fpu/multiarch/e_exp.c (__ieee754_exp): Rename to
__exp.
* sysdeps/x86_64/fpu/multiarch/w_exp.c: New file.
* sysdeps/mach/hurd/dl-sysdep.c (check_no_hidden): Use
__attribute_copy__ to copy attributes from name. Drop static qualifier
to avoid warnings about leaf attribute not having effect on static
functions.
* hurd/hurd/userlink.h (_hurd_userlink_move): New function.
* hurd/hurd/port.h (_hurd_port_move): New function.
* sysdeps/mach/hurd/spawni.c (NEW_ULINK_TABLE): New macro.
(EXPAND_DTABLE): Use NEW_ULINK_TABLE macro for ulink_dtable.
This fixes build-many-glibcs.py on i686-gnu.
Thanks Florian Weimer for the initial version.
* sysdeps/mach/hurd/spawni.c (__spawni): Add ccwdir port. Test and use
it, free it if needed.
(reauthenticate): Test and use ccwdir.
(child_init_port): In non-resetids case, test and use ccwdir.
(child_chdir): New nested function to set ccwdir.
* sysdeps/mach/hurd/i386/intr-msg.h (INTR_MSG_TRAP): Make
_hurd_intr_rpc_msg_about_to global point to start of controlled
assembly snippet. Make it check canceled flag.
* hurd/hurdsig.c (_hurdsig_abort_rpcs): Only mutate thread if it passed
the _hurd_intr_rpc_msg_about_to point.
* hurd/intr-msg.c (_hurd_intr_rpc_mach_msg): Remove comment on mutation
issue, remove cancel flag check.
