Add vector cosh/coshf and input files to libmvec microbenchmark.
libmvec-cosh-inputs:
90% Normal random distribution
range: (-710.0, 710.0)
mean: 0.0
sigma: 32.0
10% uniform random distribution in range (-500.0, 500.0)
libmvec-coshf-inputs:
90% Normal random distribution
range: (-89.0f, 89.0f)
mean: 0.0f
sigma: 16.0f
10% uniform random distribution in range (-50.0f, 50.0f)
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Add vector exp10/exp10f and input files to libmvec microbenchmark.
libmvec-exp10-inputs:
90% Normal random distribution
range: (-307.0, 308.0)
mean: 0.0
sigma: 16.0
10% uniform random distribution in range (-250.0, 250.0)
libmvec-exp10f-inputs:
90% Normal random distribution
range: (-37.0f, 38.0f)
mean: 0.0f
sigma: 8.0f
10% uniform random distribution in range (-25.0f, 25.0f)
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Add vector exp2/exp2f and input files to libmvec microbenchmark.
libmvec-exp2-inputs:
90% Normal random distribution
range: (-1022.0, 1024.0)
mean: 0.0
sigma: 16.0
10% uniform random distribution in range (-1000.0, 1000.0)
libmvec-exp2f-inputs:
90% Normal random distribution
range: (-126.0f, 128.0f)
mean: 0.0f
sigma: 8.0f
10% uniform random distribution in range (-100.0f, 100.0f)
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Add vector hypot/hypotf and input files to libmvec microbenchmark.
libmvec-hypot-inputs:
arg1:
90% Normal random distribution
range: (-DBL_MAX, DBL_MAX)
mean: 0.0
sigma: 10.0
10% uniform random distribution in range (-1000.0, 1000.0)
arg1:
90% Normal random distribution
range: (-DBL_MAX, DBL_MAX)
mean: 0.0
sigma: 10.0
10% uniform random distribution in range (-1000.0, 1000.0)
libmvec-hypotf-inputs:
arg1:
90% Normal random distribution
range: (-FLT_MAX, FLT_MAX)
mean: 0.0f
sigma: 10.0f
10% uniform random distribution in range (-1000.0f, 1000.0f)
arg2:
90% Normal random distribution
range: (-FLT_MAX, FLT_MAX)
mean: 0.0f
sigma: 10.0f
10% uniform random distribution in range (-1000.0f, 1000.0f)
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Add vector asin/asinf and input files to libmvec microbenchmark.
libmvec-asin-inputs:
90% Normal random distribution
range: (-1.0, 1.0)
mean: 0.0
sigma: 1.0
10% uniform random distribution in range (-1.0, 1.0)
libmvec-asinf-inputs:
90% Normal random distribution
range: (-1.0f, 1.0f)
mean: 0.0f
sigma: 1.0f
10% uniform random distribution in range (-1.0f, 1.0f)
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Add vector atan/atanf and input files to libmvec microbenchmark.
libmvec-atan-inputs:
arg1:
90% Normal random distribution
range: (-DBL_MAX, DBL_MAX)
mean: 0.0
sigma: 4.0
10% uniform random distribution in range (-1.0e6, 1.0e6)
arg2:
90% Normal random distribution
range: (-DBL_MAX, DBL_MAX)
mean: 0.0
sigma: 4.0
10% uniform random distribution in range (-1.0e6, 1.0e6)
libmvec-atanf-inputs:
arg1:
90% Normal random distribution
range: (-FLT_MAX, FLT_MAX)
mean: 0.0f
sigma: 4.0f
10% uniform random distribution in range (-1.0e6f, 1.0e6f)
arg2:
90% Normal random distribution
range: (-FLT_MAX, FLT_MAX)
mean: 0.0f
sigma: 4.0f
10% uniform random distribution in range (-1.0e6f, 1.0e6f)
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Replace tst-audit24bmod2.so with tst-audit24bmod2 to silence:
make[2]: Entering directory '/export/gnu/import/git/gitlab/x86-glibc/elf'
Makefile:2201: warning: overriding recipe for target '/export/build/gnu/tools-build/glibc-gitlab/build-x86_64-linux/elf/tst-audit24bmod2.so'
../Makerules:765: warning: ignoring old recipe for target '/export/build/gnu/tools-build/glibc-gitlab/build-x86_64-linux/elf/tst-audit24bmod2.so'
Add vector acos/acosf and input files to libmvec microbenchmark.
libmvec-acos-inputs:
90% Normal random distribution
range: (-1.0, 1.0)
mean: 0.0
sigma: 1.0
10% uniform random distribution in range (-1.0, 1.0)
libmvec-acosf-inputs:
90% Normal random distribution
range: (-1.0f, 1.0f)
mean: 0.0f
sigma: 1.0f
10% uniform random distribution in range (-1.0f, 1.0f)
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Add more small and medium sized tests for strcmp and strncmp.
As well for strcmp add option for more direct control of
alignment. Previously alignment was being pushed to the end of the
page. While this is the most difficult case to implement, it is far
from the common case and so shouldn't be the only benchmark.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Optimization are primarily to the loop logic and how the page cross
logic interacts with the loop.
The page cross logic is at times more expensive for short strings near
the end of a page but not crossing the page. This is done to retest
the page cross conditions with a non-faulty check and to improve the
logic for entering the loop afterwards. This is only particular cases,
however, and is general made up for by more than 10x improvements on
the transition from the page cross -> loop case.
The non-page cross cases as well are nearly universally improved.
test-strcmp, test-strncmp, test-wcscmp, and test-wcsncmp all pass.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Optimization are primarily to the loop logic and how the page cross
logic interacts with the loop.
The page cross logic is at times more expensive for short strings near
the end of a page but not crossing the page. This is done to retest
the page cross conditions with a non-faulty check and to improve the
logic for entering the loop afterwards. This is only particular cases,
however, and is general made up for by more than 10x improvements on
the transition from the page cross -> loop case.
The non-page cross cases are improved most for smaller sizes [0, 128]
and go about even for (128, 4096]. The loop page cross logic is
improved so some more significant speedup is seen there as well.
test-strcmp, test-strncmp, test-wcscmp, and test-wcsncmp all pass.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Add additional test cases for small / medium sizes.
Add tests in test-strncmp.c where `n` is near ULONG_MAX or LONG_MIN to
test for overflow bugs in length handling.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
These implementations just add to test duration. Since we have
simple_* implementations we already have a safe reference
implementation.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Commit 948ce73b31 made recvmsg/recvmmsg to always call
__convert_scm_timestamps for 64 bit time_t symbol, so adjust it to
always build it for __TIMESIZE != 64.
It fixes build for architecture with 32 bit time_t support when
configured with minimum kernel of 5.1.
Pass the actual number of bytes returned by the kernel.
Fixes: 33099d72e4 ("linux: Simplify get_nprocs")
Reviewed-by: Dmitry V. Levin <ldv@altlinux.org>
The test changes the current foreground process group, which might
break testing depending of how the make check is issued. For instance:
nohup make -j1 test t=posix/tst-spawn6 | less
Will set 'make' and 'less' to be in the foreground process group in
the current session. When tst-spawn6 new child takes over it becomes
the foreground process and 'less' is stopped and backgrounded which
interrupts the 'make check' command.
To fix it a pseudo-terminal is allocated, the test starts in new
session (so there is no controlling terminal associated), and the
pseudo-terminal is set as the controlling one (similar to what
login_tty does).
Checked on x86_64-linux-gnu.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Moved LD_AUDIT notes into requirements section since the LAV_CURRENT
bump is a requirements change that impacts loading old audit modules
or new audit modules on older loaders.
This matches the data size initial-exec relocations use on most
targets.
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The posix_spawnattr_tcsetpgrp_np works on a file descriptor (the
controlling terminal), so it would make more sense to actually fit
it on the file actions API.
Also, POSIX_SPAWN_TCSETPGROUP is not really required since it is
implicit by the presence of tcsetpgrp file action.
The posix/tst-spawn6.c is also fixed when TTY can is not present.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
PI_STATIC_AND_HIDDEN means that references to static functions, data
and symbols with hidden visibility do not need any run-time relocations
after the final link, with the build flags used by glibc.
OpenRISC follows this so enabled PI_STATIC_AND_HIDDEN by adding
configure.ac and generating configure.
Suggested-by: Florian Weimer <fweimer@redhat.com>
It is not Hurd-specific, but H.J. Lu wants it there.
Also, dc.a can be used to avoid hardcoding .long vs .quad and thus use
the same implementation for i386 and x86_64.
The rtld audit support show two problems on aarch64:
1. _dl_runtime_resolve does not preserve x8, the indirect result
location register, which might generate wrong result calls
depending of the function signature.
2. The NEON Q registers pushed onto the stack by _dl_runtime_resolve
were twice the size of D registers extracted from the stack frame by
_dl_runtime_profile.
While 2. might result in wrong information passed on the PLT tracing,
1. generates wrong runtime behaviour.
The aarch64 rtld audit support is changed to:
* Both La_aarch64_regs and La_aarch64_retval are expanded to include
both x8 and the full sized NEON V registers, as defined by the
ABI.
* dl_runtime_profile needed to extract registers saved by
_dl_runtime_resolve and put them into the new correctly sized
La_aarch64_regs structure.
* The LAV_CURRENT check is change to only accept new audit modules
to avoid the undefined behavior of not save/restore x8.
* Different than other architectures, audit modules older than
LAV_CURRENT are rejected (both La_aarch64_regs and La_aarch64_retval
changed their layout and there are no requirements to support multiple
audit interface with the inherent aarch64 issues).
* A new field is also reserved on both La_aarch64_regs and
La_aarch64_retval to support variant pcs symbols.
Similar to x86, a new La_aarch64_vector type to represent the NEON
register is added on the La_aarch64_regs (so each type can be accessed
directly).
Since LAV_CURRENT was already bumped to support bind-now, there is
no need to increase it again.
Checked on aarch64-linux-gnu.
Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The audit symbind callback is not called for binaries built with
-Wl,-z,now or when LD_BIND_NOW=1 is used, nor the PLT tracking callbacks
(plt_enter and plt_exit) since this would change the expected
program semantics (where no PLT is expected) and would have performance
implications (such as for BZ#15533).
LAV_CURRENT is also bumped to indicate the audit ABI change (where
la_symbind flags are set by the loader to indicate no possible PLT
trace).
To handle powerpc64 ELFv1 function descriptor, _dl_audit_symbind
requires to know whether bind-now is used so the symbol value is
updated to function text segment instead of the OPD (for lazy binding
this is done by PPC64_LOAD_FUNCPTR on _dl_runtime_resolve).
Checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu,
powerpc64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
For audit modules and dependencies with initial-exec TLS, we can not
set the initial TLS image on default loader initialization because it
would already be set by the audit setup. However, subsequent thread
creation would need to follow the default behaviour.
This patch fixes it by setting l_auditing link_map field not only
for the audit modules, but also for all its dependencies. This is
used on _dl_allocate_tls_init to avoid the static TLS initialization
at load time.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
la_activity is not called during application exit, even though
la_objclose is.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
We have had one downstream report from Canonical [1] that
an rrdtool test was broken by the differences in LC_TIME
that we had in the non-builtin C locale (C.UTF-8). If one
application has an issue there are going to be others, and
so with this commit we review and fix all the issues that
cause the builtin C locale to be different from C.UTF-8,
which includes:
* mon_decimal_point should be empty e.g. ""
- Depends on mon_decimal_point_wc fix.
* negative_sign should be empty e.g. ""
* week should be aligned with the builtin C/POSIX locale
* d_fmt corrected with escaped slashes e.g. "%m//%d//%y"
* yesstr and nostr should be empty e.g. ""
* country_ab2 and country_ab3 should be empty e.g. ""
We bump LC_IDENTIFICATION version and adjust the date to
indicate the change in the locale.
A new tst-c-utf8-consistency test is added to ensure
consistency between C/POSIX and C.UTF-8.
Tested on x86_64 and i686 without regression.
[1] https://sourceware.org/pipermail/libc-alpha/2022-January/135703.html
Co-authored-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
The handling of mon_decimal_point is incorrect when it comes to
handling the empty "" value. The existing parser in monetary_read()
will correctly handle setting the non-wide-character value and the
wide-character value e.g. STR_ELEM_WC(mon_decimal_point) if they are
set in the locale definition. However, in monetary_finish() we have
conflicting TEST_ELEM() which sets a default value (if the locale
definition doesn't include one), and subsequent code which looks for
mon_decimal_point to be NULL to issue a specific error message and set
the defaults. The latter is unused because TEST_ELEM() always sets a
default. The simplest solution is to remove the TEST_ELEM() check,
and allow the existing check to look to see if mon_decimal_point is
NULL and set an appropriate default. The final fix is to move the
setting of mon_decimal_point_wc so it occurs only when
mon_decimal_point is being set to a default, keeping both values
consistent. There is no way to tell the difference between
mon_decimal_point_wc having been set to the empty string and not
having been defined at all, for that distinction we must use
mon_decimal_point being NULL or "", and so we must logically set
the default together with mon_decimal_point.
Lastly, there are more fixes similar to this that could be made to
ld-monetary.c, but we avoid that in order to fix just the code
required for mon_decimal_point, which impacts the ability for C.UTF-8
to set mon_decimal_point to "", since without this fix we end up with
an inconsistent setting of mon_decimal_point set to "", but
mon_decimal_point_wc set to "." which is incorrect.
Tested on x86_64 and i686 without regression.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Add <dl-r_debug.h> to get the adddress of the r_debug structure after
relocation and its offset before relocation from the PT_DYNAMIC segment
to support DT_DEBUG, DT_MIPS_RLD_MAP_REL and DT_MIPS_RLD_MAP.
Co-developed-by: Xi Ruoyao <xry111@mengyan1223.wang>
The test leaks bits from the freed pointer via the return value
in ret, and the compiler correctly identifies this issue.
We switch the test to use TEST_VERIFY and terminate the test
if any of the pointers return an unexpected alignment.
This fixes another -Wuse-after-free error when compiling glibc
with gcc 12.
Tested on x86_64 and i686 without regression.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The timestamps created by __convert_scm_timestamps only make sense for
64 bit time_t programs, 32 bit time_t programs will ignore 64 bit time_t
timestamps since SO_TIMESTAMP will be defined to old values (either by
glibc or kernel headers).
Worse, if the buffer is not suffice MSG_CTRUNC is set to indicate it
(which breaks some programs [1]).
This patch makes only 64 bit time_t recvmsg and recvmmsg to call
__convert_scm_timestamps. Also, the assumption to called it is changed
from __ASSUME_TIME64_SYSCALLS to __TIMESIZE != 64 since the setsockopt
might be called by libraries built without __TIME_BITS=64. The
MSG_CTRUNC is only set for the 64 bit symbols, it should happen only
if 64 bit time_t programs run older kernels.
Checked on x86_64-linux-gnu and i686-linux-gnu.
[1] https://github.com/systemd/systemd/pull/20567
Reviewed-by: Florian Weimer <fweimer@redhat.com>
