On Linux/i386, there are 3 ways to make a system call:
1. call *%gs:SYSINFO_OFFSET. This requires TLS initialization.
2. call *_dl_sysinfo. This requires relocation of _dl_sysinfo.
3. int $0x80. This is slower than #2 and #3, but works everywhere.
When an object file is compiled with PIC, #1 is prefered since it is
faster than #3 and doesn't require relocation of _dl_sysinfo. For
dynamic executables, ld.so initializes TLS. However, for static
executables, before TLS is initialized by __libc_setup_tls, #3 should
be used for system calls.
This patch adds <startup.h> which defines _startup_fatal and defaults
it to __libc_fatal. It replaces __libc_fatal with _startup_fatal in
static executables where it is called before __libc_setup_tls is called.
This header file is included in all files containing functions which are
called before __libc_setup_tls is called. On Linux/i386, when PIE is
enabled by default, _startup_fatal is turned into ABORT_INSTRUCTION and
I386_USE_SYSENTER is defined to 0 so that "int $0x80" is used for system
calls before __libc_setup_tls is called.
Tested on i686 and x86-64. Without this patch, all statically-linked
tests will fail on i686 when the compiler defaults to -fPIE.
[BZ #21913]
* csu/libc-tls.c: Include <startup.h> first.
(__libc_setup_tls): Call _startup_fatal instead of __libc_fatal.
* elf/dl-tunables.c: Include <startup.h> first.
* include/libc-symbols.h (BUILD_PIE_DEFAULT): New.
* sysdeps/generic/startup.h: New file.
* sysdeps/unix/sysv/linux/i386/startup.h: Likewise.
* sysdeps/unix/sysv/linux/i386/brk.c [BUILD_PIE_DEFAULT != 0]
(I386_USE_SYSENTER): New. Defined to 0.
Different than other architectures hppa-linux-gnu define different values
for ENOTSUP and EOPNOTSUPP, where the later is a Linux specific one.
This leads to tst-preadwritev{64}v2 tests failures:
$ ./testrun.sh misc/tst-preadvwritev2
error: tst-preadvwritev2-common.c:35: preadv2 failure did not set errno to ENOTSUP (223)
error: 1 test failures
The straightforward fix is to return the POSIX defined ENOTSUP on all
p{read,write}v{64}v2 implementations instead of Linux specific one.
Checked on x86_64-linux-gnu and the tst-preadwritev{64}v2 on
hppa-linux-gnu (although due the installed kernel on my testing system
the pwritev{64}v2 with an invalid flag still fails due a known kernel
issue [1]).
[BZ #21780]
* sysdeps/posix/preadv2.c (preadv2): Use ENOTSUP instead of
EOPNOTSUPP.
* sysdeps/posix/preadv64v2.c (preadv64v2): Likewise.
* sysdeps/posix/pwritev2.c (pwritev2): Likewise.
* sysdeps/posix/pwritev64v2.c (pwritev64v2): Likewise.
* sysdeps/unix/sysv/linux/preadv2.c (preadv2): Likewise.
* sysdeps/unix/sysv/linux/preadv64v2.c (preadv64v2): Likewise.
* sysdeps/unix/sysv/linux/pwritev2.c (pwritev2): Likewise.
* sysdeps/unix/sysv/linux/pwritev64v2.c (pwritev64v2): Likewise.
[1] https://sourceware.org/ml/libc-alpha/2017-06/msg00726.html
For XPG4.2, sa_sigaction, SA_ONSTACK, SA_RESETHAND, SA_RESTART and
SA_NODEFER should be defined in signal.h, but they are only defined
for other standards at present.
This patch fixes the various bits/sigaction.h headers accordingly.
All the fixes are essentially the same, except those for SPARC and
Tile.
For SPARC, the header (a) spuriously defined various nonstandard
macros for __USE_UNIX98 || defined __USE_XOPEN2K8 and (b) defined some
standard macros as aliases of nonstandard ones instead of the other
way round. This patch fixes the SPARC header to handle these macros
the same way and with the same conditions as those for other
architectures, so the standard macros are the primary ones and the
other ones are defined only for __USE_MISC and are aliases of the
standard ones where applicable.
For Tile, the header spuriously defined the nonstandard macro
SA_NOPTRACE for __USE_UNIX98 || defined __USE_XOPEN2K8; this is moved
to __USE_MISC.
(Those nonstandard macros are in a reserved namespace, but it seems
desirable to be consistent between architectures as far as possible,
and so not define them in standard modes anywhere.)
Tested for x86_64, and with build-many-glibcs.py.
[BZ #21899]
* bits/sigaction.h (struct sigaction): Define sa_handler and
sa_sigaction using union also for [__USE_XOPEN_EXTENDED].
(SA_ONSTACK): Change [__USE_UNIX98] condition to
[__USE_XOPEN_EXTENDED].
(SA_RESTART): Likewise.
(SA_NODEFER): Likewise.
(SA_RESETHAND): Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/sigaction.h
(struct sigaction): Define sa_handler and sa_sigaction using union
also for [__USE_XOPEN_EXTENDED].
(SA_ONSTACK): Change [__USE_UNIX98] condition to
[__USE_XOPEN_EXTENDED].
(SA_RESTART): Likewise.
(SA_NODEFER): Likewise.
(SA_RESETHAND): Likewise.
* sysdeps/unix/sysv/linux/bits/sigaction.h
(struct sigaction): Define sa_handler and sa_sigaction using union
also for [__USE_XOPEN_EXTENDED].
(SA_ONSTACK): Change [__USE_UNIX98] condition to
[__USE_XOPEN_EXTENDED].
(SA_RESTART): Likewise.
(SA_NODEFER): Likewise.
(SA_RESETHAND): Likewise.
* sysdeps/unix/sysv/linux/hppa/bits/sigaction.h
(struct sigaction): Define sa_handler and sa_sigaction using union
also for [__USE_XOPEN_EXTENDED].
(SA_ONSTACK): Change [__USE_UNIX98] condition to
[__USE_XOPEN_EXTENDED].
(SA_RESTART): Likewise.
(SA_NODEFER): Likewise.
(SA_RESETHAND): Likewise.
* sysdeps/unix/sysv/linux/ia64/bits/sigaction.h
(struct sigaction): Define sa_handler and sa_sigaction using union
also for [__USE_XOPEN_EXTENDED].
(SA_ONSTACK): Change [__USE_UNIX98] condition to
[__USE_XOPEN_EXTENDED].
(SA_RESTART): Likewise.
(SA_NODEFER): Likewise.
(SA_RESETHAND): Likewise.
* sysdeps/unix/sysv/linux/mips/bits/sigaction.h
(struct sigaction): Define sa_handler and sa_sigaction using union
also for [__USE_XOPEN_EXTENDED].
(SA_ONSTACK): Change [__USE_UNIX98] condition to
[__USE_XOPEN_EXTENDED].
(SA_RESTART): Likewise.
(SA_NODEFER): Likewise.
(SA_RESETHAND): Likewise.
* sysdeps/unix/sysv/linux/s390/bits/sigaction.h
(struct sigaction): Define sa_handler and sa_sigaction using union
also for [__USE_XOPEN_EXTENDED].
(SA_ONSTACK): Change [__USE_UNIX98] condition to
[__USE_XOPEN_EXTENDED].
(SA_RESTART): Likewise.
(SA_NODEFER): Likewise.
(SA_RESETHAND): Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/sigaction.h
(struct sigaction): Define sa_handler and sa_sigaction using union
also for [__USE_XOPEN_EXTENDED].
(SA_ONSTACK): Change [__USE_UNIX98] condition to
[__USE_XOPEN_EXTENDED].
(SA_RESTART): Likewise.
(SA_NODEFER): Likewise. Define directly rather than as alias.
(SA_RESETHAND): Likewise.
(SA_INTERRUPT): Define only for [__USE_MISC].
(SA_NOMASK): Define as alias of SA_NODEFER, only for [__USE_MISC].
(SA_ONESHOT): Define as alias of SA_RESETHAND, only for
[__USE_MISC].
(SA_STACK): Define only for [__USE_MISC].
* sysdeps/unix/sysv/linux/tile/bits/sigaction.h
(struct sigaction): Define sa_handler and sa_sigaction using union
also for [__USE_XOPEN_EXTENDED].
(SA_ONSTACK): Change [__USE_UNIX98] condition to
[__USE_XOPEN_EXTENDED].
(SA_RESTART): Likewise.
(SA_NODEFER): Likewise.
(SA_RESETHAND): Likewise.
(SA_NOPTRACE): Define only for [__USE_MISC].
Define I386_USE_SYSENTER to 0 or 1 so that special versions of syscalls
with "int $0x80" can be provided for static PIE during self relocation.
Also check PIC instead SHARED for PIC version of syscall macros.
* sysdeps/unix/sysv/linux/i386/sysdep.h (I386_USE_SYSENTER):
Define to I386_USE_SYSENTER to 0 or 1 if not defined.
(ENTER_KERNEL): Check if I386_USE_SYSENTER is 1 and check PIC.
(INTERNAL_SYSCALL_MAIN_INLINE): Likewise.
(INTERNAL_SYSCALL_NCS): Likewise.
(LOADARGS_1): Likewise.
(LOADARGS_5): Likewise.
(RESTOREARGS_1): Likewise.
(RESTOREARGS_5): Likewise.
The relative branch directly to __libc_vfork results in an relocation
that cannot be resolved. Specifically a R_MICROBLAZE_64_PCREL relocation
is created for this branch, however for MicroBlaze R_MICROBLAZE_64_PCREL
type relocations symbols are not resolved. Additionally due to the
branch being located in the .text section the instruction cannot be
rewritten as the section is not writable, and causes a segfault at
runtime when loading libpthread.
To resolve this issue, ensure the branch is done using PLT. This removes
the need to modify the instruction and trades the R_MICROBLAZE_64_PCREL
for a more common R_MICROBLAZE_JUMP via the PLT.
[BZ #21779]
* sysdeps/unix/sysv/linux/microblaze/pt-vfork.S: Branch using PLT.
The function maybe_enable_malloc_check, which is called by
__tunables_init, calls __access_noerrno. It isn't problem when
symbol is is in ld.so, which has a special version of __access_noerrno
without stack protector. But when glibc is built with stack protector,
maybe_enable_malloc_check in libc.a can't call the regular version of
__access_noerrno with stack protector.
This patch changes how Linux defines the __access_noerrno to be an
inline call instead and thus preventing defining different build
rules for ld/static and shared.
H.J. Lu <hongjiu.lu@intel.com>
Adhemerval Zanella <adhemerval.zanella@linaro.org>
[BZ #21744]
* elf/dl-tunables.c: Include not-errno.h header.
* include/unistd.h (__access_noerrno): Remove definition.
* sysdeps/unix/sysv/linux/access.c (__access_noerrno): Likewise.
* sysdeps/generic/not-errno.h: New file.
* sysdeps/unix/sysv/linux/not-errno.h: Likewise.
sys/ptrace.h on S390 used to be includible both before and after
asm/ptrace.h, until commit b08a6a0dea
among other changes introduced PTRACE_SINGLEBLOCK enum constant which
is also defined in asm/ptrace.h as a macro, making sys/ptrace.h fail
to compile when included after asm/ptrace.h.
* sysdeps/unix/sysv/linux/s390/sys/ptrace.h [_LINUX_PTRACE_H ||
_S390_PTRACE_H]: Undefine all PTRACE_* macro constants defined
later as enum constants, except PTRACE_PEEKUSER, PTRACE_POKEUSER,
and PTRACE_SEIZE_DEVEL that are not defined by Linux headers.
This patch fixes the argument passing for exit syscall after
the clone function returns on hppa. This fixes misc/tst-clone2
on alpha-linux-gnu.
Checked misc/tst-clone2 on alpha-linux-gnu.
[BZ #21512]
* sysdeps/unix/sysv/linux/alpha/clone.S (__clone): Fix argument
passing to syscall exit.
The patch proposed by Peter Bergner [1] to libgcc in order to fix
[BZ #21707] adds a dependency on a symbol provided by the loader,
forcing the loader to be linked to tests after libgcc was linked.
It also requires to read the thread pointer during IRELA relocations.
Tested on powerpc, powerpc64, powerpc64le, s390x and x86_64.
[1] https://sourceware.org/ml/libc-alpha/2017-06/msg01383.html
[BZ #21707]
* csu/libc-start.c (LIBC_START_MAIN): Perform IREL{,A}
relocations before or after initializing the TCB on statically
linked executables. That's a per-architecture definition.
* elf/rtld.c (dl_main): Add a comment about thread-local
variables initialization.
* sysdeps/generic/libc-start.h: New file. Define
ARCH_APPLY_IREL and ARCH_SETUP_IREL.
* sysdeps/powerpc/Makefile:
[$(subdir) = elf && $(multi-arch) != no] (tests-static-internal): Add tst-tlsifunc-static.
[$(subdir) = elf && $(multi-arch) != no && $(build-shared) == yes]
(tests-internal): Add tst-tlsifunc.
* sysdeps/powerpc/tst-tlsifunc.c: New file.
* sysdeps/powerpc/tst-tlsifunc-static.c: Likewise.
* sysdeps/powerpc/powerpc64le/Makefile (f128-loader-link): New
variable.
[$(subdir) = math] (test-float128% test-ifloat128%): Force
linking to the loader after linking to libgcc.
[$(subdir) = wcsmbs || $(subdir) = stdlib] (bug-strtod bug-strtod2)
(bug-strtod2 tst-strtod-round tst-wcstod-round tst-strtod6 tst-strrom)
(tst-strfrom-locale strfrom-skeleton): Likewise.
* sysdeps/unix/sysv/linux/powerpc/libc-start.h: New file. Define
ARCH_APPLY_IREL and ARCH_SETUP_IREL.
This patch fixes the argument passing for exit syscall after
the clone function returns on hppa. This fixes misc/tst-clone2
on hppa-linux-gnu.
Checked misc/tst-clone2 on hppa-linux-gnu.
[BZ #21512]
* sysdeps/unix/sysv/linux/hppa/clone.S (__clone): Fix argument
passing to syscall exit.
This patch adds the HWCAP_JSCVT, HWCAP_FCMA and HWCAP_LRCPC macros
from Linux 4.12 to the AArch64 bits/hwcap.h.
* sysdeps/unix/sysv/linux/aarch64/bits/hwcap.h (HWCAP_FCMA): New macro.
(HWCAP_JSCVT, HWCAP_LRCPC): Likewise.
Linux 4.12 (b745fafaf70c0a98a2e1e7ac8cb14542889ceb0e) adds a new
p{read,write}v2 flag RWF_NOWAIT. This patch adds it for linux
uio-ext.h header.
Checked on x86_64-linux-gnu (on a 4.10 kernel).
[BZ #21738]
* manual/llio.texi (RWF_NOWAIT): New item.
* misc/tst-preadvwritev2-common.c (do_test_with_invalid_flags):
Add RWF_NOWAIT check.
* sysdeps/unix/sysv/linux/bits/uio-ext.h (RWF_NOWAIT): New flag.
The request PTRACE_SINGLEBLOCK was introduced in Linux 3.15. Thus the ptrace call
will fail on older kernels.
Thus the test is now testing PTRACE_SINGLEBLOCK with data argument pointing to a
buffer on stack which is assumed to fail. If the request would be interpreted as
PTRACE_GETREGS, then the ptrace call will not fail and the regs are written to buf.
If we run with a kernel with support for PTRACE_SINGLEBLOCK a ptrace call with
data=NULL, returns zero with no error. If we run with a kernel without support for
PTRACE_SINGLEBLOCK a ptrace call with data=NULL reports an error.
In the latter case, the test is just continuing with PTRACE_CONT.
ChangeLog:
* sysdeps/unix/sysv/linux/s390/tst-ptrace-singleblock.c:
Support running on kernels without PTRACE_SINGLEBLOCK.
Add a new tunable (glibc.tune.cpu) to override CPU identification on
aarch64. This is useful in two cases: one where it is desirable to
pretend to be another CPU for purposes of testing or because routines
written for that CPU are beneficial for specific workloads and second
where the underlying kernel does not support emulation of MRS to get
the MIDR of the CPU.
* elf/dl-tunables.h (tunable_is_name): Move from...
* elf/dl-tunables.c (is_name): ... here.
(parse_tunables, __tunables_init): Adjust.
* manual/tunables.texi: Document glibc.tune.cpu.
* sysdeps/aarch64/dl-tunables.list: New file.
* sysdeps/unix/sysv/linux/aarch64/cpu-features.c (struct
cpu_list): New type.
(cpu_list): New list of CPU names and their MIDR.
(get_midr_from_mcpu): New function.
(init_cpu_features): Override MIDR if necessary.
This patch fixes various miscellaneous namespace issues in
sys/ucontext.h headers.
Some struct tags are removed where the structs also have *_t typedef
names, while other struct tags without such names are renamed to start
__; the changes are noted in NEWS as they can affect C++ name mangling
(although there seems to be little if any external use of these types,
at least based on checking codesearch.debian.net). For powerpc,
pointers to struct pt_regs (not defined in this header) are changed to
point to struct __ctx(pt_regs), so in the __USE_MISC case those struct
fields continue to point to the existing struct pt_regs type for
maximum compatibility, while when that's a namespace issue they point
to a struct __pt_regs type which is always an incomplete struct.
Tested for affected architectures with build-many-glibcs.py.
[BZ #21457]
* sysdeps/unix/sysv/linux/m68k/sys/ucontext.h (fpregset_t): Remove
struct tag.
* sysdeps/unix/sysv/linux/mips/sys/ucontext.h (fpregset_t):
Likewise.
* sysdeps/unix/sysv/linux/nios2/sys/ucontext.h (mcontext_t):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h (pt_regs):
Declare struct type with __ctx.
[__WORDSIZE != 32] (mcontext_t): Use __ctx with pt_regs struct
tag.
(ucontext_t) [__WORDSIZE == 32]: Use __ctx with pt_regs struct tag
and regs field name.
The new hwcap values indicate support for:
- Vector packed decimal facility
- Vector enhancements facility 1
- Guarded storage facility
Note: arch12 is NOT the official name of the new CPU.
It refers to the edition number of the Principle of Operations manual.
ChangeLog:
* sysdeps/s390/dl-procinfo.c (_dl_s390_cap_flags):
Add vxd, vxe, gs flag.
* sysdeps/s390/dl-procinfo.h: Add HWCAP_S390_VXD, HWCAP_S390_VXE,
HWCAP_S390_GS capability.
* sysdeps/unix/sysv/linux/s390/bits/hwcap.h
(HWCAP_S390_VXD, HWCAP_S390_VXE, HWCAP_S390_GS): Define.
This patch enables float128 support for ia64, so that all the
configurations where GCC supports _Float128 / __float128 as an
ABI-distinct type now have glibc support as well. bits/floatn.h
declares the support to be available for GCC 4.4 and later, which is
when the libgcc support was added. The removal of
sysdeps/ia64/fpu/k_rem_pio2.c is because the generic k_rem_pio2.c
defines a function required by the float128 code.
Tested (compilation only) with build-many-glibcs.py for ia64 (GCC 6
and GCC 7).
Given how long it is since libm-test-ulps has been updated for ia64, I
think truncating the file and regenerating it from scratch would be a
good idea when doing a regeneration to add float128 ulps. I expect
various ia64 libm issues (at least some already filed in Bugzilla) to
result in test failures even after ulps regeneration, but hopefully
the float128 code will pass tests as it's the same as used on other
architectures.
* sysdeps/ia64/Implies: Add ieee754/float128.
* sysdeps/ia64/bits/floatn.h: New file.
* sysdeps/ia64/float128-abi.h: Likewise.
* manual/math.texi (Mathematics): Document support for _Float128
on ia64.
* sysdeps/ia64/Makefile [$(subdir) = math] (CPPFLAGS): Append to
Makefile variable.
* sysdeps/ia64/fpu/e_sqrtf128.c: New file.
* sysdeps/ia64/fpu/k_rem_pio2.c: Remove file.
* sysdeps/ia64/fpu/sfp-machine.h: New file. Based on libgcc.
* sysdeps/ia64/math-tests.h: New file.
* math/libm-test-support.h (XFAIL_FLOAT128_PAYLOAD): Also define
based on TEST_COND_binary128 for [__ia64__].
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Update.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise,
The ucontext_t type has a tag struct ucontext. As with previous such
issues for siginfo_t and stack_t, this tag is not permitted by POSIX
(is not in a reserved namespace), and so namespace conformance means
breaking C++ name mangling for this type.
In this case, the type does need to have some tag rather than just a
typedef name, because it includes a pointer to itself. This patch
uses struct ucontext_t as the new tag, so the type is mangled as
ucontext_t (the POSIX *_t reservation applies in all namespaces, not
just the namespace of ordinary identifiers). Another reserved name
such as struct __ucontext could of course be used.
Because of other namespace issues, this patch does not by itself fix
bug 21457 or allow any XFAILs to be removed.
Tested for x86_64, and with build-many-glibcs.py.
[BZ #21457]
* sysdeps/arm/sys/ucontext.h (struct ucontext): Rename to struct
ucontext_t.
* sysdeps/generic/sys/ucontext.h (struct ucontext): Likewise.
* sysdeps/i386/sys/ucontext.h (struct ucontext): Likewise.
* sysdeps/m68k/sys/ucontext.h (struct ucontext): Likewise.
* sysdeps/mips/sys/ucontext.h (struct ucontext): Likewise.
* sysdeps/unix/sysv/linux/aarch64/sys/ucontext.h (struct
ucontext): Likewise.
* sysdeps/unix/sysv/linux/alpha/sys/ucontext.h (struct ucontext):
Likewise.
* sysdeps/unix/sysv/linux/arm/sys/ucontext.h (struct ucontext):
Likewise.
* sysdeps/unix/sysv/linux/hppa/sys/ucontext.h (struct ucontext):
Likewise.
* sysdeps/unix/sysv/linux/ia64/sys/ucontext.h (struct ucontext):
Likewise.
* sysdeps/unix/sysv/linux/m68k/sys/ucontext.h (struct ucontext):
Likewise.
* sysdeps/unix/sysv/linux/mips/sys/ucontext.h (struct ucontext):
Likewise.
* sysdeps/unix/sysv/linux/nios2/sys/ucontext.h (struct ucontext):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h (struct
ucontext): Likewise.
* sysdeps/unix/sysv/linux/s390/sys/ucontext.h (struct ucontext):
Likewise.
* sysdeps/unix/sysv/linux/sh/sys/ucontext.h (struct ucontext):
Likewise.
* sysdeps/unix/sysv/linux/sparc/sys/ucontext.h (struct ucontext):
Likewise.
* sysdeps/unix/sysv/linux/tile/sys/ucontext.h (struct ucontext):
Likewise.
* sysdeps/unix/sysv/linux/x86/sys/ucontext.h (struct ucontext):
Likewise.
* sysdeps/powerpc/powerpc32/backtrace.c (struct
rt_signal_frame_32): Likewise.
* sysdeps/powerpc/powerpc64/backtrace.c (struct signal_frame_64):
Likewise.
* sysdeps/unix/sysv/linux/aarch64/kernel_rt_sigframe.h (struct
kernel_rt_sigframe): Likewise.
* sysdeps/unix/sysv/linux/aarch64/sigcontextinfo.h (SIGCONTEXT):
Likewise.
* sysdeps/unix/sysv/linux/arm/register-dump.h (register_dump):
Likewise.
* sysdeps/unix/sysv/linux/arm/sigcontextinfo.h (SIGCONTEXT):
Likewise.
* sysdeps/unix/sysv/linux/hppa/profil-counter.h
(__profil_counter): Likewise.
* sysdeps/unix/sysv/linux/microblaze/sigcontextinfo.h
(SIGCONTEXT): Likewise.
* sysdeps/unix/sysv/linux/mips/kernel_rt_sigframe.h (struct
kernel_rt_sigframe): Likewise.
* sysdeps/unix/sysv/linux/nios2/kernel_rt_sigframe.h (struct
kernel_rt_sigframe): Likewise.
* sysdeps/unix/sysv/linux/nios2/sigcontextinfo.h (SIGCONTEXT):
Likewise.
* sysdeps/unix/sysv/linux/sh/makecontext.S (__makecontext):
Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/makecontext.c
(__start_context): Likewise.
* sysdeps/unix/sysv/linux/tile/sigcontextinfo.h (SIGCONTEXT):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/register-dump.h (register_dump):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/sigcontextinfo.h (SIGCONTEXT):
Likewise.
This patch enables float128 support for x86_64 and x86. All GCC
versions that can build glibc provide the required support, but since
GCC 6 and before don't provide __builtin_nanq / __builtin_nansq, sNaN
tests and some tests of NaN payloads need to be disabled with such
compilers (this does not affect the generated glibc binaries at all,
just the tests). bits/floatn.h declares float128 support to be
available for GCC versions that provide the required libgcc support
(4.3 for x86_64, 4.4 for i386 GNU/Linux, 4.5 for i386 GNU/Hurd);
compilation-only support was present some time before then, but not
really useful without the libgcc functions.
fenv_private.h needed updating to avoid trying to put _Float128 values
in registers. I make no assertion of optimality of the
math_opt_barrier / math_force_eval definitions for this case; they are
simply intended to be sufficient to work correctly.
Tested for x86_64 and x86, with GCC 7 and GCC 6. (Testing for x32 was
compilation tests only with build-many-glibcs.py to verify the ABI
baseline updates. I have not done any testing for Hurd, although the
float128 support is enabled there as for GNU/Linux.)
* sysdeps/i386/Implies: Add ieee754/float128.
* sysdeps/x86_64/Implies: Likewise.
* sysdeps/x86/bits/floatn.h: New file.
* sysdeps/x86/float128-abi.h: Likewise.
* manual/math.texi (Mathematics): Document support for _Float128
on x86_64 and x86.
* sysdeps/i386/fpu/fenv_private.h: Include <bits/floatn.h>.
(math_opt_barrier): Do not put _Float128 values in floating-point
registers.
(math_force_eval): Likewise.
[__x86_64__] (SET_RESTORE_ROUNDF128): New macro.
* sysdeps/x86/fpu/Makefile [$(subdir) = math] (CPPFLAGS): Append
to Makefile variable.
* sysdeps/x86/fpu/e_sqrtf128.c: New file.
* sysdeps/x86/fpu/sfp-machine.h: Likewise. Based on libgcc.
* sysdeps/x86/math-tests.h: New file.
* math/libm-test-support.h (XFAIL_FLOAT128_PAYLOAD): New macro.
* math/libm-test-getpayload.inc (getpayload_test_data): Use
XFAIL_FLOAT128_PAYLOAD.
* math/libm-test-setpayload.inc (setpayload_test_data): Likewise.
* math/libm-test-totalorder.inc (totalorder_test_data): Likewise.
* math/libm-test-totalordermag.inc (totalordermag_test_data):
Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist: Update.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
On aarch64, alpha, arm, hppa, mips, nios2, powerpc, sh, sparc, tile,
and x86_64 the clone syscall jumps to _exit after the child execution
and the function ends the process execution by calling exit_group.
This behavior have a small issue where threads created with
CLONE_THREAD using clone syscall directly will eventually exit the
whole group altogether instead of just the thread created. Also,
s390, microblaze, ia64, i386, and m68k differs by calling exit
syscall directly.
This patch changes all architectures to call the exit syscall
directly, as for s390, microblaze, ia64, i386, and m68k. This do not
have change glibc internal behavior in any sort, since the only
usage of clone implementation in posix_spawn calls _exit directly
in the created child (fork uses a direct call to clone).
Checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu,
powerpc-linux-gnu, powerpc64le-linux-gnu, sparc64-linux-gnu,
and sparcv9-linux-gnu.
[BZ #21512]
* sysdeps/unix/sysv/linux/aarch64/clone.S (__clone): Call exit
syscall instead of jump to _exit.
(CLONE_VM_BIT): Remove unused define.
(CLONE_VM): Likewise.
(CLONE_THREAD_BIT): Likewise.
(CLONE_THREAD): Likewise.
* sysdeps/unix/sysv/linux/alpha/clone.S (__clone): Likewise.
(CLONE_VM): Remove unused define.
* sysdeps/unix/sysv/linux/arm/clone.S (__clone): Likewise.
(CLONE_VM): Remove unused define.
(CLONE_THREAD): Likewise.
* sysdeps/unix/sysv/linux/i386/clone.S (CLONE_VM): Likewise.
* sysdeps/unix/sysv/linux/ia64/clone2.S (__clone2): Call exit
syscall instead of jump to _exit.
* sysdeps/unix/sysv/linux/hppa/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/mips/clone.S (__clone): Likewise.
(CLONE_VM): Remove unused define.
(CLONE_THREAD): Likewise.
* sysdeps/unix/sysv/linux/nios2/clone.S (__clone): Likewise.
(CLONE_VM): Remove unused define.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S (__clone):
Likewise.
(CLONE_VM): Remove unused define.
(CLONE_THREAD): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S (__clone):
Likewise.
(CLONE_VM): Remove unused define.
(CLONE_THREAD): Likewise.
* sysdeps/unix/sysv/linux/sh/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/clone.S (__clone): Likewise.
(CLONE_VM): Remove unused define.
* sysdeps/unix/sysv/linux/sparc/sparc64/clone.S (__clone): Likewise.
(CLONE_VM): Remove unused define.
* sysdeps/unix/sysv/linux/tile/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/x86_64/clone.S (__clone): Likewise.
(CLONE_VM): Remove unused define.
* sysdeps/unix/sysv/linux/Makefile (tests): Add tst-clone3.
* sysdeps/unix/sysv/linux/tst-clone3.c: New file.
Fix
This patch adds ULPs for the float128 type, updates the abilist for libc
and libm, and adds the files bits/floatn.h and float128-abi.h, in order to
enable the new type for powerpc64le.
This patch also adds the implementation of sqrtf128 for powerpc64le, since
it is not implemented in libgcc. The sfp-machine.h header is taken from
libgcc.
Tested for powerpc64le (GCC 6.2 and GCC 7.1), powerpc64 and s390x.
* manual/math.texi (Mathematics): Mention the enabling of float128
for powerpc64le.
* sysdeps/powerpc/bits/floatn.h: New file.
* sysdeps/powerpc/fpu/libm-test-ulps: Regenerated.
* sysdeps/powerpc/fpu/math_private.h:
(__ieee754_sqrtf128): New inline override.
* sysdeps/powerpc/powerpc64le/Implies-before: New file.
* sysdeps/powerpc/powerpc64le/Makefile: New file.
* sysdeps/powerpc/powerpc64le/fpu/e_sqrtf128.c: New file.
* sysdeps/powerpc/powerpc64le/fpu/sfp-machine.h: New file.
* sysdeps/powerpc/powerpc64le/power9/fpu/e_sqrtf128.c: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist:
Updated.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64le/float128-abi.h:
New file.
Commit cdfbe5037f added sysconf support
for cache geometries on powerpc, but mishandled errno. For valid input
parameters, sysconf() should not set errno.
* sysdeps/unix/sysv/linux/powerpc/sysconf.c: Remove references
to errno, and simplify remaining related code.
As shown by conform/ tests once the remaining namespace issues are
fixed, the tile bits/sigaction.h fails to declare SA_RESETHAND,
SA_RESTART and SA_NODEFER for non-XSI POSIX.1:2008 as other versions
do. Those constants were moved from XSI to Base in the 2008 edition
of POSIX. This patch fixes the conditions to match other versions of
this header.
Tested (compilation only) for tilegx-linux-gnu with
build-many-glibcs.py.
[BZ #21622]
* sysdeps/unix/sysv/linux/tile/bits/sigaction.h (SA_RESTART):
Define for [__USE_UNIX98 || __USE_XOPEN2K8], not [__USE_UNIX98 ||
__USE_MISC].
(SA_NODEFER): Likewise.
(SA_RESETHAND): Likewise.
Many of the things defined by bits/signum.h are invariant across all
supported operating systems. This patch factors out all of them to a
new header bits/signum-generic.h, which each bits/signum.h will include
and then override whichever things need adjustment. Normally that will
mean, at most, adding or changing a few signal numbers.
A user-visible side effect is that the obsolete signal constant SIGUNUSED
(which is an alias for SIGSYS on all platforms that define it) is no
longer exposed by any version of bits/signum.h.
A side effect only relevant to glibc hackers is that _NSIG is now defined
in terms of __SIGRTMAX, instead of the other way around. This is because
__SIGRTMAX varies from platform to platform, but _NSIG==__SIGRTMAX+1 is
true universally. If your platform doesn't support realtime signals,
leave __SIGRTMAX equal to __SIGRTMIN.
I also added a Linux-specific test to make sure that our signal constants
match the ones in <asm/signal.h>, since we can't use that header (it's
not even vaguely namespace-clean).
* bits/signum-generic.h: Renamed from bits/signum.h.
Add proper multiple include guard and misuse check.
Define __SIGRTMIN = __SIGRTMAX = 32, and define _NSIG = __SIGRTMAX+1.
Move definition of SIGIO to "archaic names for compatibility" section.
* bits/signum.h: New file which just includes bits/signum-generic.h.
* sysdeps/unix/bsd/bits/signum.h
* sysdeps/unix/sysv/linux/bits/signum.h
* sysdeps/unix/sysv/linux/alpha/bits/signum.h
* sysdeps/unix/sysv/linux/hppa/bits/signum.h
* sysdeps/unix/sysv/linux/mips/bits/signum.h
* sysdeps/unix/sysv/linux/sparc/bits/signum.h
Just include <bits/signum-generic.h> and then add or adjust
signal constants. Do not define SIGUNUSED, SIGRTMIN, or SIGRTMAX.
* signal/Makefile: Install bits/signum-generic.h.
* signal/signal.h: Define SIGRTMIN and SIGRTMAX here.
* sysdeps/generic/siglist.h: SIGSYS and SIGWINCH are
universal. Prefer SIGPOLL to SIGIO. Simplify #ifdeffage.
* sysdeps/unix/sysv/linux/tst-signal-numbers.sh: New test.
* sysdeps/unix/sysv/linux/Makefile: Run it.
This patch consolidates the open Linux syscall implementation on
sysdeps/unix/sysv/linux/open{64}.c. The changes are:
1. Remove wordsize-64 openat{64}.
2. For architetures that define __OFF_T_MATCHES_OFF64_T openat64
will be default one with alias to required symbols. Otherwise
openat64 will pass the required O_LARGEFILE flag on syscall.
Checked on i686-linux-gnu, x86_64-linux-gnu, x86_64-linux-gnux32,
arch64-linux-gnu, arm-linux-gnueabihf, and powerpc64le-linux-gnu.
* sysdeps/unix/sysv/linux/openat.c (__libc_openat): Build only
for !__OFF_T_MATCHES_OFF64_T.
* sysdeps/unix/sysv/linux/openat64.c (__libc_openat64): New
implementation based on open64.
* sysdeps/unix/sysv/linux/wordsize-64/openat.c: Remove file.
* sysdeps/unix/sysv/linux/wordsize-64/openat64.c: Likewise.
This patch XFAILs one test where the powerpc32 ucontext_t has the
wrong type of a field, to allow the conform/ tests as a whole to pass
once the namespace issues are fixed.
Tested with build-many-glibcs.py.
[BZ #21635]
* sysdeps/unix/sysv/linux/powerpc/powerpc32/Makefile
[$(subdir) = conform] (conformtest-xfail-conds): New variable.
* conform/data/signal.h-data (uc_mcontext): XFAIL for
powerpc32-linux.
* conform/data/ucontext.h-data (uc_mcontext): Likewise.
This patch XFAILs one test where the ia64 ucontext_t has the wrong
type of a field, to allow the conform/ tests as a whole to pass once
the namespace issues are fixed.
Tested with build-many-glibcs.py.
[BZ #21634]
* sysdeps/unix/sysv/linux/ia64/Makefile [$(subdir) = conform]
(conformtest-xfail-conds): New variable.
* conform/data/signal.h-data (uc_sigmask): XFAIL for ia64-linux.
* conform/data/ucontext.h-data (uc_sigmask): Likewise.
The current IFUNC selection is based on microbenchmarks in glibc. It
should give the best performance for most workloads. But other choices
may have better performance for a particular workload or on the hardware
which wasn't available at the selection was made. The environment
variable, GLIBC_TUNABLES=glibc.tune.ifunc=-xxx,yyy,-zzz...., can be used
to enable CPU/ARCH feature yyy, disable CPU/ARCH feature yyy and zzz,
where the feature name is case-sensitive and has to match the ones in
cpu-features.h. It can be used by glibc developers to override the
IFUNC selection to tune for a new processor or improve performance for
a particular workload. It isn't intended for normal end users.
NOTE: the IFUNC selection may change over time. Please check all
multiarch implementations when experimenting.
Also, GLIBC_TUNABLES=glibc.tune.x86_non_temporal_threshold=NUMBER is
provided to set threshold to use non temporal store to NUMBER,
GLIBC_TUNABLES=glibc.tune.x86_data_cache_size=NUMBER to set data cache
size, GLIBC_TUNABLES=glibc.tune.x86_shared_cache_size=NUMBER to set
shared cache size.
* elf/dl-tunables.list (tune): Add ifunc,
x86_non_temporal_threshold,
x86_data_cache_size and x86_shared_cache_size.
* manual/tunables.texi: Document glibc.tune.ifunc,
glibc.tune.x86_data_cache_size, glibc.tune.x86_shared_cache_size
and glibc.tune.x86_non_temporal_threshold.
* sysdeps/unix/sysv/linux/x86/dl-sysdep.c: New file.
* sysdeps/x86/cpu-tunables.c: Likewise.
* sysdeps/x86/cacheinfo.c
(init_cacheinfo): Check and get data cache size, shared cache
size and non temporal threshold from cpu_features.
* sysdeps/x86/cpu-features.c [HAVE_TUNABLES] (TUNABLE_NAMESPACE):
New.
[HAVE_TUNABLES] Include <unistd.h>.
[HAVE_TUNABLES] Include <elf/dl-tunables.h>.
[HAVE_TUNABLES] (TUNABLE_CALLBACK (set_ifunc)): Likewise.
[HAVE_TUNABLES] (init_cpu_features): Use TUNABLE_GET to set
IFUNC selection, data cache size, shared cache size and non
temporal threshold.
* sysdeps/x86/cpu-features.h (cpu_features): Add data_cache_size,
shared_cache_size and non_temporal_threshold.
This patch removes PTRACE_GETREGS, PTRACE_SETREGS, PTRACE_GETFPREGS
and PTRACE_SETFPREGS as these requests does not exist on s390 kernel.
But the kernel has support for PTRACE_SINGLEBLOCK,
PTRACE_SECCOMP_GET_FILTER, PTRACE_PEEKUSR_AREA, PTRACE_POKEUSR_AREA,
PTRACE_GET_LAST_BREAK, PTRACE_ENABLE_TE, PTRACE_DISABLE_TE and
PTRACE_TE_ABORT_RAND. Thus those are defined now.
The current kernel s390 specific ptrace.h file also defines
PTRACE_PEEKTEXT_AREA, PTRACE_PEEKDATA_AREA, PTRACE_POKETEXT_AREA,
PTRACE_POKEDATA_AREA, PTRACE_PEEK_SYSTEM_CALL, PTRACE_POKE_SYSTEM_CALL
and PTRACE_PROT, but those requests are not supported.
Thus those defines are skipped in glibc ptrace.h.
There were old includes of ptrace.h in sysdeps/s390/fpu/fesetenv.c.
The ptrace feature isn't used there anymore, thus I removed the includes.
Before this patch, <glibc>/sysdeps/unix/sysv/linux/s390/sys/ptrace.h
uses ptrace-request 12 for PTRACE_GETREGS,
but <kernel>/include/uapi/linux/ptrace.h uses 12 for PTRACE_SINGLEBLOCK.
The s390 kernel has never had support for PTRACE_GETREGS!
Thus glibc ptrace.h is adjusted to match kernel ptrace.h.
The new s390 specific test ensures, that PTRACE_SINGLEBLOCK defined
in glibc works as expected. If the kernel would interpret it as
PTRACE_GETREGS, then the testcase will not make any progress
and will time out.
ChangeLog:
[BZ #21539]
* NEWS: Mention s390 ptrace request changes.
* sysdeps/unix/sysv/linux/s390/sys/ptrace.h
(PTRACE_GETREGS, PTRACE_SETREGS, PTRACE_GETFPREGS,
PTRACE_SETFPREGS): Remove enum constant.
(PT_GETREGS, PT_SETREGS, PT_GETFPREGS, T_SETFPREGS):
Remove defines.
(PTRACE_SINGLEBLOCK): New enum constant.
(PT_STEPBLOCK): New define.
(PTRACE_PEEKUSR_AREA, PTRACE_POKEUSR_AREA,
PTRACE_GET_LAST_BREAK, PTRACE_ENABLE_TE, PTRACE_DISABLE_TE,
PTRACE_TE_ABORT_RAND): New enum constant and define.
* sysdeps/s390/fpu/fesetenv.c: Remove ptrace.h includes.
* sysdeps/unix/sysv/linux/s390/tst-ptrace-singleblock.c:
New file.
* sysdeps/unix/sysv/linux/s390/Makefile: Add test.
This patch fixes a namespace issue for one more field in the x86
sys/ucontext.h that I missed in my previous changes.
Tested for x86_64.
[BZ #21457]
* sysdeps/unix/sysv/linux/x86/sys/ucontext.h [__x86_64__] (struct
_libc_xmmreg): Use __ctx in defining field.
Some older standards (XPG4.2 through POSIX.1:2001, XSI only) require
sys/wait.h to include the definition of struct rusage. This is
missing in glibc.
This patch adds the required definition. struct rusage is moved to a
new header bits/types/struct_rusage.h to avoid bringing in the whole
of sys/resource.h (although the standards in question do allow the
whole of sys/resource.h to be brought in). In the five
bits/resource.h headers, the only variation between the definitions of
struct rusage is that the sysdeps/unix/sysv/linux version is prepared
for x32 (by having anonymous unions with __syscall_slong_t fields) and
the others are not. Thus, this version is suitable for use
generically (everything other than x32 simply has __syscall_slong_t
the same as long int, so there are no API or ABI changes involved, and
anonymous unions are already a required language feature for glibc
headers elsewhere), and this patch uses it as a base for the single
implementation of bits/types/struct_rusage.h.
Tested for x86_64, and with build-many-glibcs.py.
[BZ #21575]
* resource/bits/types/struct_rusage.h: New file.
* include/bits/types/struct_rusage.h: Likewise.
* bits/resource.h (struct rusage): Include
<bits/types/struct_rusage.h> instead of defining here.
* sysdeps/unix/sysv/linux/bits/resource.h (struct rusage):
Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/resource.h (struct rusage):
Likewise.
* sysdeps/unix/sysv/linux/mips/bits/resource.h (struct rusage):
Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/resource.h (struct rusage):
Likewise.
* resource/Makefile (headers): Add bits/types/struct_rusage.h.
* posix/sys/wait.h [__USE_XOPEN_EXTENDED && !__USE_XOPEN2K8]:
Include <bits/types/struct_rusage.h>
Building glibc with gcc configured with --enable-default-pie failed on s390
due to assembler messages:
../sysdeps/unix/sysv/linux/s390/s390-32/__makecontext_ret.S:44:
Error: junk at end of line, first unrecognized character is `@'
HIDDEN_JUMPTARGET was expanded to exit@PLT@GOTOFF.
If SHARED is not defined, HIDDEN_JUMPTARGET is defined to JUMPTARGET
in sysdeps/s390/s390-32/sysdep.h. There it expanded to exit@PLT
in non SHARED case as PIC is defined if gcc is configured with
--enable-default-pie. Thus I've changed the "ifdef PIC" to "ifdef SHARED"
as we do not want PLTs in the static obj files. I've also changed this
in sysdeps/s390/s390-64/sysdep.h.
I've also adjusted sysdeps/unix/sysv/linux/s390/s390-32/__makecontext_ret.S.
If glibc is configured with --disable-hidden-plt, then NO_HIDDEN is defined.
In SHARED case HIDDEN_JUMPTARGET would be expanded to exit@PLT@GOTOFF
instead of __GI_exit@GOTOFF.
Now we jump to:
- __GI_exit if SHARED is defined
- exit@PLT if SHARED and NO_HIDDEN is defined
- exit if both are not defined.
On s390 31bit we have to setup GOT pointer in r12 if we use a PLT stub.
Therefore I use SYSCALL_PIC_SETUP from sysdep.h and added the missing semicolons.
ChangeLog:
[BZ #21537]
* sysdeps/s390/s390-32/sysdep.h (JUMPTARGET, SYSCALL_PIC_SETUP):
Check SHARED instead of PIC.
(SYSCALL_PIC_SETUP): Add missing semicolons.
* sysdeps/s390/s390-64/sysdep.h (JUMPTARGET, SYSCALL_PIC_SETUP):
Check SHARED instead of PIC.
* sysdeps/unix/sysv/linux/s390/s390-32/__makecontext_ret.S
(__makecontext_ret): Adjust code to jump to exit.
Since kernel 2.6.0 all Linux version accept the system call number
in register 1 for svc 0. There is no need to have special handling
that uses EX for system calls < 256. This will simplify and speed
up that code.
A microbenchmark doing "syscall(__NR_getpid);" in a loops gets faster
by ~12%.
* sysdeps/unix/sysv/linux/s390/s390-32/syscall.S: Simplify
code by always using SVC 0 instead of EX.
* sysdeps/unix/sysv/linux/s390/s390-64/syscall.S: Likewise.
This patch consolidates Linux sync_file_range at default
sysdeps/unix/sysv/linux/sync_file_range.c implementation. It also
moves the rules flags from generic io/Makefile to Linux one due the
fact it is a Linux-only symbol.
Checked on i686-linux-gnu and x86_64-linux-gnu.
* io/Makefile (CFLAGS-sync_file_range.c): Remove rule.
* sysdeps/unix/sysv/linux/Makefile (CFLAGS-sync_file_range.c): New
rule.
* sysdeps/unix/sysv/linux/wordsize-64/syscalls.list: Remove
sync_file_range.
