On the test workload (mpv --cache=yes with VP9 video decoding), the
bin scanning has a very poor success rate (less than 2%). The tcache
scanning has about 50% success rate, so keep that.
Update comments in malloc/tst-memalign-2 to indicate the purpose
of the tests. Even with the scanning removed, the additional
merging opportunities since commit 542b110585
("malloc: Enable merging of remainders in memalign (bug 30723)")
are sufficient to pass the existing large bins test.
Remove leftover variables from _int_free from refactoring in the
same commit.
Reviewed-by: DJ Delorie <dj@redhat.com>
Previously, calling _int_free from _int_memalign could put remainders
into the tcache or into fastbins, where they are invisible to the
low-level allocator. This results in missed merge opportunities
because once these freed chunks become available to the low-level
allocator, further memalign allocations (even of the same size are)
likely obstructing merges.
Furthermore, during forwards merging in _int_memalign, do not
completely give up when the remainder is too small to serve as a
chunk on its own. We can still give it back if it can be merged
with the following unused chunk. This makes it more likely that
memalign calls in a loop achieve a compact memory layout,
independently of initial heap layout.
Drop some useless (unsigned long) casts along the way, and tweak
the style to more closely match GNU on changed lines.
Reviewed-by: DJ Delorie <dj@redhat.com>
The trim_threshold is too aggressive a heuristic to decide if chunk
reuse is OK for reallocated memory; for repeated small, shrinking
allocations it leads to internal fragmentation and for repeated larger
allocations that fragmentation may blow up even worse due to the dynamic
nature of the threshold.
Limit reuse only when it is within the alignment padding, which is 2 *
size_t for heap allocations and a page size for mmapped allocations.
There's the added wrinkle of THP, but this fix ignores it for now,
pessimizing that case in favor of keeping fragmentation low.
This resolves BZ #30579.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reported-by: Nicolas Dusart <nicolas@freedelity.be>
Reported-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
This patch adds the strict checking for power-of-two alignments
in aligned_alloc(), and updates the manual accordingly.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Based on these comments in malloc.c:
size field is or'ed with NON_MAIN_ARENA if the chunk was obtained
from a non-main arena. This is only set immediately before handing
the chunk to the user, if necessary.
The NON_MAIN_ARENA flag is never set for unsorted chunks, so it
does not have to be taken into account in size comparisons.
When we pull a chunk off the unsorted list (or any list) we need to
make sure that flag is set properly before returning the chunk.
Use the rounded-up size for chunk_ok_for_memalign()
Do not scan the arena for reusable chunks if there's no arena.
Account for chunk overhead when determining if a chunk is a reuse
candidate.
mcheck interferes with memalign, so skip mcheck variants of
memalign tests.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This patch adds a chunk scanning algorithm to the _int_memalign code
path that reduces heap fragmentation by reusing already aligned chunks
instead of always looking for chunks of larger sizes and splitting
them. The tcache macros are extended to allow removing a chunk from
the middle of the list.
The goal is to fix the pathological use cases where heaps grow
continuously in workloads that are heavy users of memalign.
Note that tst-memalign-2 checks for tcache operation, which
malloc-check bypasses.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
And make always supported. The configure option was added on glibc 2.25
and some features require it (such as hwcap mask, huge pages support, and
lock elisition tuning). It also simplifies the build permutations.
Changes from v1:
* Remove glibc.rtld.dynamic_sort changes, it is orthogonal and needs
more discussion.
* Cleanup more code.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
git commit 0849eed45d ("malloc: Move MORECORE fallback mmap to
sysmalloc_mmap_fallback") moved a block of code from sysmalloc to a
new helper function sysmalloc_mmap_fallback(), but 'pagesize' is used
for the 'minsize' argument and 'MMAP_AS_MORECORE_SIZE' for the
'pagesize' argument.
Fixes: 0849eed45d ("malloc: Move MORECORE fallback mmap to sysmalloc_mmap_fallback")
Signed-off-by: Robert Morell <rmorell@nvidia.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* malloc/malloc.c (_int_malloc): remove redundant check of
unsorted bin corruption
With commit "b90ddd08f6dd688e651df9ee89ca3a69ff88cd0c"
(malloc: Additional checks for unsorted bin integrity),
same check of (bck->fd != victim) is added before checking of unsorted
chunk corruption, which was added in "bdc3009b8ff0effdbbfb05eb6b10966753cbf9b8"
(Added check before removing from unsorted list).
..
3773 if (__glibc_unlikely (bck->fd != victim)
3774 || __glibc_unlikely (victim->fd != unsorted_chunks (av)))
3775 malloc_printerr ("malloc(): unsorted double linked list corrupted");
..
..
3815 /* remove from unsorted list */
3816 if (__glibc_unlikely (bck->fd != victim))
3817 malloc_printerr ("malloc(): corrupted unsorted chunks 3");
3818 unsorted_chunks (av)->bk = bck;
..
So this extra check can be removed.
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Signed-off-by: Ayush Mittal <ayush.m@samsung.com>
Reviewed-by: DJ Delorie <dj@redhat.com>
If there is enough space in the chunk to satisfy the new size, return
the old pointer as is, thus avoiding any locks or reallocations. The
only real place this has a benefit is in large chunks that tend to get
satisfied with mmap, since there is a large enough spare size (up to a
page) for it to matter. For allocations on heap, the extra size is
typically barely a few bytes (up to 15) and it's unlikely that it would
make much difference in performance.
Also added a smoke test to ensure that the old pointer is returned
unchanged if the new size to realloc is within usable size of the old
pointer.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
MAX_FAST_SIZE is 160 at most, so a uint8_t is sufficient. This makes
it harder to use memory corruption, by overwriting global_max_fast
with a large value, to fundamentally alter malloc behavior.
Reviewed-by: DJ Delorie <dj@redhat.com>
Rename atomic_exchange_rel/acq to use atomic_exchange_release/acquire
since these map to the standard C11 atomic builtins.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This is used to detect errors early. The read of the oldsize is
not protected by any lock, so check this value to avoid causing
bigger mistakes.
Reviewed-by: DJ Delorie <dj@redhat.com>
Address space for heap segments is reserved in a mmap call with
MAP_ANONYMOUS | MAP_PRIVATE and protection flags PROT_NONE. This
reservation does not count against the RSS limit of the process or
system. Backing memory is allocated using mprotect in alloc_new_heap
and grow_heap, and at this point, the allocator expects the kernel
to provide memory (subject to memory overcommit).
The SIGSEGV that might generate due to MAP_NORESERVE (according to
the mmap manual page) does not seem to occur in practice, it's always
SIGKILL from the OOM killer. Even if there is a way that SIGSEGV
could be generated, it is confusing to applications that this only
happens for secondary heaps, not for large mmap-based allocations,
and not for the main arena.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Redirect internal assertion failures to __libc_assert_fail, based on
based on __libc_message, which writes directly to STDERR_FILENO
and calls abort. Also disable message translation and reword the
error message slightly (adjusting stdlib/tst-bz20544 accordingly).
As a result of these changes, malloc no longer needs its own
redefinition of __assert_fail.
__libc_assert_fail needs to be stubbed out during rtld dependency
analysis because the rtld rebuilds turn __libc_assert_fail into
__assert_fail, which is unconditionally provided by elf/dl-minimal.c.
This change is not possible for the public assert macro and its
__assert_fail function because POSIX requires that the diagnostic
is written to stderr.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Since commit ec2c1fcefb ("malloc:
Abort on heap corruption, without a backtrace [BZ #21754]"),
__libc_message always terminates the process. Since commit
a289ea09ea ("Do not print backtraces
on fatal glibc errors"), the backtrace facility has been removed.
Therefore, remove enum __libc_message_action and the action
argument of __libc_message, and mark __libc_message as _No_return.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Cancellation currently cannot happen at this point because dlopen
as used by the unwind link always performs additional allocations
for libgcc_s.so.1, even if it has been loaded already as a dependency
of the main executable. But it seems prudent not to rely on this
quirk.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
It is prudent not to run too much code after detecting heap
corruption, and __fxprintf is really complex. The line number
and file name do not carry much information, so it is not included
in the error message. (__libc_message only supports %s formatting.)
The function name and assertion should provide some context.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
In-band signaling avoids an uninitialized variable warning when
building with -Og and GCC 12.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
The current limit on MALLOC_MMAP_THRESHOLD is either 1 Mbyte (for
32-bit apps) or 32 Mbytes (for 64-bit apps). This value was set by a
patch dated 2006 (15 years ago). Attempts to set the threshold higher
are currently ignored.
The default behavior is appropriate for many highly parallel
applications where many processes or threads are sharing RAM. In other
situations where the number of active processes or threads closely
matches the number of cores, a much higher limit may be desired by the
application designer. By today's standards on personal computers and
small servers, 2 Gbytes of RAM per core is commonly available. On
larger systems 4 Gbytes or more of RAM is sometimes available.
Instead of raising the limit to match current needs, this patch
proposes to remove the limit of the tunable, leaving the decision up
to the user of a tunable to judge the best value for their needs.
This patch does not change any of the defaults for malloc tunables,
retaining the current behavior of the dynamic malloc mmap threshold.
bugzilla 27801 - Remove upper limit on tunable MALLOC_MMAP_THRESHOLD
Reviewed-by: DJ Delorie <dj@redhat.com>
malloc/
malloc.c changed do_set_mmap_threshold to remove test
for HEAP_MAX_SIZE.
This patch adds support huge page support on main arena allocation,
enable with tunable glibc.malloc.hugetlb=2. The patch essentially
disable the __glibc_morecore() sbrk() call (similar when memory
tag does when sbrk() call does not support it) and fallback to
default page size if the memory allocation fails.
Checked on x86_64-linux-gnu.
Reviewed-by: DJ Delorie <dj@redhat.com>
It is enabled as default for glibc.malloc.hugetlb set to 2 or higher.
It also uses a non configurable minimum value and maximum value,
currently set respectively to 1 and 4 selected huge page size.
The arena allocation with huge pages does not use MAP_NORESERVE. As
indicate by kernel internal documentation [1], the flag might trigger
a SIGBUS on soft page faults if at memory access there is no left
pages in the pool.
On systems without a reserved huge pages pool, is just stress the
mmap(MAP_HUGETLB) allocation failure. To improve test coverage it is
required to create a pool with some allocated pages.
Checked on x86_64-linux-gnu with no reserved pages, 10 reserved pages
(which trigger mmap(MAP_HUGETBL) failures) and with 256 reserved pages
(which does not trigger mmap(MAP_HUGETLB) failures).
[1] https://www.kernel.org/doc/html/v4.18/vm/hugetlbfs_reserv.html#resv-map-modifications
Reviewed-by: DJ Delorie <dj@redhat.com>
With the morecore hook removed, there is not easy way to provide huge
pages support on with glibc allocator without resorting to transparent
huge pages. And some users and programs do prefer to use the huge pages
directly instead of THP for multiple reasons: no splitting, re-merging
by the VM, no TLB shootdowns for running processes, fast allocation
from the reserve pool, no competition with the rest of the processes
unlike THP, no swapping all, etc.
This patch extends the 'glibc.malloc.hugetlb' tunable: the value
'2' means to use huge pages directly with the system default size,
while a positive value means and specific page size that is matched
against the supported ones by the system.
Currently only memory allocated on sysmalloc() is handled, the arenas
still uses the default system page size.
To test is a new rule is added tests-malloc-hugetlb2, which run the
addes tests with the required GLIBC_TUNABLE setting. On systems without
a reserved huge pages pool, is just stress the mmap(MAP_HUGETLB)
allocation failure. To improve test coverage it is required to create
a pool with some allocated pages.
Checked on x86_64-linux-gnu.
Reviewed-by: DJ Delorie <dj@redhat.com>
To increase effectiveness with Transparent Huge Page with madvise, the
large page size is use instead page size for sbrk increment for the
main arena.
Checked on x86_64-linux-gnu.
Reviewed-by: DJ Delorie <dj@redhat.com>
Linux Transparent Huge Pages (THP) current supports three different
states: 'never', 'madvise', and 'always'. The 'never' is
self-explanatory and 'always' will enable THP for all anonymous
pages. However, 'madvise' is still the default for some system and
for such case THP will be only used if the memory range is explicity
advertise by the program through a madvise(MADV_HUGEPAGE) call.
To enable it a new tunable is provided, 'glibc.malloc.hugetlb',
where setting to a value diffent than 0 enables the madvise call.
This patch issues the madvise(MADV_HUGEPAGE) call after a successful
mmap() call at sysmalloc() with sizes larger than the default huge
page size. The madvise() call is disable is system does not support
THP or if it has the mode set to "never" and on Linux only support
one page size for THP, even if the architecture supports multiple
sizes.
To test is a new rule is added tests-malloc-hugetlb1, which run the
addes tests with the required GLIBC_TUNABLE setting.
Checked on x86_64-linux-gnu.
Reviewed-by: DJ Delorie <dj@redhat.com>
Hoist the NULL check for malloc_usable_size into its entry points in
malloc-debug and malloc and assume non-NULL in all callees. This fixes
BZ #28506
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
We stopped adding "Contributed by" or similar lines in sources in 2012
in favour of git logs and keeping the Contributors section of the
glibc manual up to date. Removing these lines makes the license
header a bit more consistent across files and also removes the
possibility of error in attribution when license blocks or files are
copied across since the contributed-by lines don't actually reflect
reality in those cases.
Move all "Contributed by" and similar lines (Written by, Test by,
etc.) into a new file CONTRIBUTED-BY to retain record of these
contributions. These contributors are also mentioned in
manual/contrib.texi, so we just maintain this additional record as a
courtesy to the earlier developers.
The following scripts were used to filter a list of files to edit in
place and to clean up the CONTRIBUTED-BY file respectively. These
were not added to the glibc sources because they're not expected to be
of any use in future given that this is a one time task:
https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dchttps://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Remove unused code and declare __libc_mallopt when !IS_IN (libc) to
allow the debug hook to build with --disable-tunables.
Also, run tst-ifunc-isa-2* tests only when tunables are enabled since
the result depends on it.
Tested on x86_64.
Reported-by: Matheus Castanho <msc@linux.ibm.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
These deprecated functions are only safe to call from
__malloc_initialize_hook and as a result, are not useful in the
general case. Move the implementations to libc_malloc_debug so that
existing binaries that need it will now have to preload the debug DSO
to work correctly.
This also allows simplification of the core malloc implementation by
dropping all the undumping support code that was added to make
malloc_set_state work.
One known breakage is that of ancient emacs binaries that depend on
this. They will now crash when running with this libc. With
LD_BIND_NOW=1, it will terminate immediately because of not being able
to find malloc_set_state but with lazy binding it will crash in
unpredictable ways. It will need a preloaded libc_malloc_debug.so so
that its initialization hook is executed to allow its malloc
implementation to work properly.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The malloc-check debugging feature is tightly integrated into glibc
malloc, so thanks to an idea from Florian Weimer, much of the malloc
implementation has been moved into libc_malloc_debug.so to support
malloc-check. Due to this, glibc malloc and malloc-check can no
longer work together; they use altogether different (but identical)
structures for heap management. This should not make a difference
though since the malloc check hook is not disabled anywhere.
malloc_set_state does, but it does so early enough that it shouldn't
cause any problems.
The malloc check tunable is now in the debug DSO and has no effect
when the DSO is not preloaded.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Now that mcheck no longer needs to check __malloc_initialized (and no
other third party hook can since the symbol is not exported), make the
variable boolean and static so that it is used strictly within malloc.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Remove all malloc hook uses from core malloc functions and move it
into a new library libc_malloc_debug.so. With this, the hooks now no
longer have any effect on the core library.
libc_malloc_debug.so is a malloc interposer that needs to be preloaded
to get hooks functionality back so that the debugging features that
depend on the hooks, i.e. malloc-check, mcheck and mtrace work again.
Without the preloaded DSO these debugging features will be nops.
These features will be ported away from hooks in subsequent patches.
Similarly, legacy applications that need hooks functionality need to
preload libc_malloc_debug.so.
The symbols exported by libc_malloc_debug.so are maintained at exactly
the same version as libc.so.
Finally, static binaries will no longer be able to use malloc
debugging features since they cannot preload the debugging DSO.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Make the __morecore and __default_morecore symbols compat-only and
remove their declarations from the API. Also, include morecore.c
directly into malloc.c; this should ideally get merged into malloc in
a future cleanup.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Remove __after_morecore_hook from the API and finalize the symbol so
that it can no longer be used in new applications. Old applications
using __after_morecore_hook will find that their hook is no longer
called.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
As a result, is not necessary to specify __attribute__ ((nocommon))
on individual definitions.
GCC 10 defaults to -fno-common on all architectures except ARC,
but this change is compatible with older GCC versions and ARC, too.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
_int_realloc is correctly declared at the top to be static, but
incorrectly defined without the static keyword. Fix that. The
generated binaries have identical code.
The tcache allocator layer uses the tcache pointer as a key to
identify a block that may be freed twice. Since this is in the
application data area, an attacker exploiting a use-after-free could
potentially get access to the entire tcache structure through this
key. A detailed write-up was provided by Awarau here:
https://awaraucom.wordpress.com/2020/07/19/house-of-io-remastered/
Replace this static pointer use for key checking with one that is
generated at malloc initialization. The first attempt is through
getrandom with a fallback to random_bits(), which is a simple
pseudo-random number generator based on the clock. The fallback ought
to be sufficient since the goal of the randomness is only to make the
key arbitrary enough that it is very unlikely to collide with user
data.
Co-authored-by: Eyal Itkin <eyalit@checkpoint.com>
After commit 1e26d35193 ("malloc: Fix
tcache leak after thread destruction [BZ #22111]"),
tcache_shutting_down is still not early enough. When we detach a
thread with no tcache allocated, tcache_shutting_down would still be
false.
Reviewed-by: DJ Delorie <dj@redhat.com>
