The bits/floatn.h header currently only has defines relating to
_Float128. This patch adds defines relating to other _FloatN /
_FloatNx types.
The approach taken is to add defines for all _FloatN / _FloatNx types
known to GCC, and to put them in a common bits/floatn-common.h header
included at the end of all the individual bits/floatn.h headers. If
in future some defines become different for different glibc
configurations, they will move out into the separate bits/floatn.h
headers.
Some defines are expected always to be the same across glibc ports.
Corresponding defines are nevertheless put in this header. The intent
is that where there are conditionals (in headers or in non-installed
files) that can just repeat the same or nearly the same logic for each
floating-point type, they should do so, even if in fact the cases for
some types could be unconditionally present or absent because the same
conditionals are true or false for all glibc configurations. This
should make the glibc code with such conditionals easier to read,
because the reader can just see that the same conditionals are
repeated for each type, rather than seeing different conditionals for
different types and needing to reason, at each location with such
differences, why those differences are indeed correct there. (Cases
involving per-format rather than per-type logic are more likely still
to need differences in how they handle different types.)
Having such defines and conditionals also helps in incremental
preparation for adding _Float32 / _Float64 / _Float32x / _Float64x
function aliases. I intend subsequent patches to add such
conditionals corresponding to those already present for _Float128, as
well as making more architecture-specific function implementations use
common macros to define aliases in preparation for adding such _FloatN
/ _FloatNx aliases.
Tested for x86_64.
* bits/floatn-common.h: New file.
* math/Makefile (headers): Add bits/floatn-common.h.
* bits/floatn.h: Include <bits/floatn-common.h>.
* sysdeps/ia64/bits/floatn.h: Likewise.
* sysdeps/ieee754/ldbl-128/bits/floatn.h: Likewise.
* sysdeps/mips/ieee754/bits/floatn.h: Likewise.
* sysdeps/powerpc/bits/floatn.h: Likewise.
* sysdeps/x86/bits/floatn.h: Likewise.
Simplify the C99 isgreater macros. Although some support was added
in GCC 2.97, not all targets added support until GCC 3.1. Therefore
only use the builtins in math.h from GCC 3.1 onwards, and defer to
generic macros otherwise. Improve the generic isunordered macro
to use compares rather than call fpclassify twice - this is not only
faster but also correct for signaling NaNs.
* math/math.h: Improve handling of C99 isgreater macros.
* sysdeps/alpha/fpu/bits/mathinline.h: Remove isgreater macros.
* sysdeps/m68k/m680x0/fpu/bits/mathinline.h: Likewise.
* sysdeps/powerpc/bits/mathinline.h: Likewise.
* sysdeps/sparc/fpu/bits/mathinline.h: Likewise.
* sysdeps/x86/fpu/bits/mathinline.h: Likewise.
In math/math.h, __MATH_TG will expand signbit to __builtin_signbit*,
e.g.: __builtin_signbitf128, before GCC 6. However, there has never
been a __builtin_signbitf128 in GCC and the type-generic builtin is
only available since GCC 6. For older GCC, this patch defines
__builtin_signbitf128 to __signbitf128, so that the internal function
is used instead of the non-existent builtin.
This patch also changes the implementation of __signbitf128, because
it was reusing the implementation of __signbitl from ldbl-128, which
calls __builtin_signbitl. Using the long double version of the
builtin is not correct on machines where _Float128 is ABI-distinct
from long double (i.e.: ia64, powerpc64le, x86, x86_84). The new
implementation does not rely on builtins when being built with GCC
versions older than 6.0.
The new code does not currently affect powerpc64le builds, because
only GCC 6.2 fulfills the requirements from configure. It might
affect powerpc64le builds if those requirements are backported to
older versions of the compiler. The new code affects x86_64 builds,
since glibc is supposed to build correctly with older versions of GCC.
Tested for powerpc64le and x86_64.
* include/math.h (__signbitf128): Define as hidden.
* sysdeps/ieee754/float128/s_signbitf128.c (__signbitf128):
Reimplement without builtins.
* sysdeps/ia64/bits/floatn.h [!__GNUC_PREREQ (6, 0)]
(__builtin_signbitf128): Define to __signbitf128.
* sysdeps/powerpc/bits/floatn.h: Likewise.
* sysdeps/x86/bits/floatn.h: Likewise.
This patch adds ULPs for the float128 type, updates the abilist for libc
and libm, and adds the files bits/floatn.h and float128-abi.h, in order to
enable the new type for powerpc64le.
This patch also adds the implementation of sqrtf128 for powerpc64le, since
it is not implemented in libgcc. The sfp-machine.h header is taken from
libgcc.
Tested for powerpc64le (GCC 6.2 and GCC 7.1), powerpc64 and s390x.
* manual/math.texi (Mathematics): Mention the enabling of float128
for powerpc64le.
* sysdeps/powerpc/bits/floatn.h: New file.
* sysdeps/powerpc/fpu/libm-test-ulps: Regenerated.
* sysdeps/powerpc/fpu/math_private.h:
(__ieee754_sqrtf128): New inline override.
* sysdeps/powerpc/powerpc64le/Implies-before: New file.
* sysdeps/powerpc/powerpc64le/Makefile: New file.
* sysdeps/powerpc/powerpc64le/fpu/e_sqrtf128.c: New file.
* sysdeps/powerpc/powerpc64le/fpu/sfp-machine.h: New file.
* sysdeps/powerpc/powerpc64le/power9/fpu/e_sqrtf128.c: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist:
Updated.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64le/float128-abi.h:
New file.
Linux commit ID a4700a26107241cc7b9ac8528b2c6714ff99983d reserved 2 more
bits for the instructions darn (Deliver a Random Number) and scv (System
Call Vectored).
Linux commit ID 6997e57d693b07289694239e52a10d2f02c3a46f reserved
another bit for internal usage.
* sysdeps/powerpc/bits/hwcap.h: Add PPC_FEATURE2_DARN and
PPC_FEATURE2_SCV.
* sysdeps/powerpc/dl-procinfo.c (_dl_powerpc_cap_flags): Add scv
and darn.
Information about whether the ABI of long double is the same as that
of double is split between bits/mathdef.h and bits/wordsize.h.
When the ABIs are the same, bits/mathdef.h defines
__NO_LONG_DOUBLE_MATH. In addition, in the case where the same glibc
binary supports both -mlong-double-64 and -mlong-double-128,
bits/wordsize.h defines __LONG_DOUBLE_MATH_OPTIONAL, along with
__NO_LONG_DOUBLE_MATH if this particular compilation is with
-mlong-double-64.
As part of the refactoring I proposed in
<https://sourceware.org/ml/libc-alpha/2016-11/msg00745.html>, this
patch puts all that information in a single header,
bits/long-double.h. It is included from sys/cdefs.h alongside the
include of bits/wordsize.h, so other headers generally do not need to
include bits/long-double.h directly.
Previously, various bits/mathdef.h headers and bits/wordsize.h headers
had this long double information (including implicitly in some
bits/mathdef.h headers through not having the defines present in the
default version). After the patch, it's all in six bits/long-double.h
headers. Furthermore, most of those new headers are not
architecture-specific. Architectures with optional long double all
use the ldbl-opt sysdeps directory, either in the order (ldbl-64-128,
ldbl-opt, ldbl-128) or (ldbl-128ibm, ldbl-opt). Thus a generic header
for the case where long double = double, and headers in ldbl-128,
ldbl-96 and ldbl-opt, suffices to cover every architecture except for
cases where long double properties vary between different ABIs sharing
a set of installed headers; fortunately all the ldbl-opt cases share a
single compiler-predefined macro __LONG_DOUBLE_128__ that can be used
to tell whether this compilation is -mlong-double-64 or
-mlong-double-128.
The two cases where a set of headers is shared between ABIs with
different long double properties, MIPS (o32 has long double = double,
other ABIs use ldbl-128) and SPARC (32-bit has optional long double,
64-bit has required long double), need their own bits/long-double.h
headers.
As with bits/wordsize.h, multiple-include protection for this header
is generally implicit through the include guards on sys/cdefs.h, and
multiple inclusion is harmless in any case. There is one subtlety:
the header must not define __LONG_DOUBLE_MATH_OPTIONAL if
__NO_LONG_DOUBLE_MATH was defined before its inclusion, because doing
so breaks how sysdeps/ieee754/ldbl-opt/nldbl-compat.h defines
__NO_LONG_DOUBLE_MATH itself before including system headers. Subject
to keeping that working, it would be reasonable to move these macros
from defined/undefined #ifdef to always-defined 1/0 #if semantics, but
this patch does not attempt to do so, just rearranges where the macros
are defined.
After this patch, the only use of bits/mathdef.h is the alpha one for
modifying complex function ABIs for old GCC. Thus, all versions of
the header other than the default and alpha versions are removed, as
is the include from math.h.
Tested for x86_64 and x86. Also did compilation-only testing with
build-many-glibcs.py.
* bits/long-double.h: New file.
* sysdeps/ieee754/ldbl-128/bits/long-double.h: Likewise.
* sysdeps/ieee754/ldbl-96/bits/long-double.h: Likewise.
* sysdeps/ieee754/ldbl-opt/bits/long-double.h: Likewise.
* sysdeps/mips/bits/long-double.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/long-double.h: Likewise.
* math/Makefile (headers): Add bits/long-double.h.
* misc/sys/cdefs.h: Include <bits/long-double.h>.
* stdlib/strtold.c: Include <bits/long-double.h> instead of
<bits/wordsize.h>.
* bits/mathdef.h [!_COMPLEX_H]: Do not allow inclusion.
[!__NO_LONG_DOUBLE_MATH]: Remove conditional code.
* math/math.h: Do not include <bits/mathdef.h>.
* sysdeps/aarch64/bits/mathdef.h: Remove file.
* sysdeps/alpha/bits/mathdef.h [!_COMPLEX_H]: Do not allow
inclusion.
* sysdeps/ia64/bits/mathdef.h: Remove file.
* sysdeps/m68k/m680x0/bits/mathdef.h: Likewise.
* sysdeps/mips/bits/mathdef.h: Likewise.
* sysdeps/powerpc/bits/mathdef.h: Likewise.
* sysdeps/s390/bits/mathdef.h: Likewise.
* sysdeps/sparc/bits/mathdef.h: Likewise.
* sysdeps/x86/bits/mathdef.h: Likewise.
* sysdeps/s390/s390-32/bits/wordsize.h
[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]: Remove
conditional code.
* sysdeps/s390/s390-64/bits/wordsize.h
[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]:
Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/wordsize.h
[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/wordsize.h
[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]:
Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/wordsize.h
[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]:
Likewise.
Continuing the refactoring of bits/mathdef.h, this patch stops it
defining FP_ILOGB0 and FP_ILOGBNAN, moving the required information to
a new header bits/fp-logb.h.
There are only two possible values of each of those macros permitted
by ISO C. TS 18661-1 adds corresponding macros for llogb, and their
values are required to correspond to those of the ilogb macros in the
obvious way. Thus two boolean values - for which the same choices are
correct for most architectures - suffice to determine the value of all
these macros, and by defining macros for those boolean values in
bits/fp-logb.h we can then define the public FP_* macros in math.h and
avoid the present duplication of the associated feature test macro
logic.
This patch duly moves to bits/fp-logb.h defining __FP_LOGB0_IS_MIN and
__FP_LOGBNAN_IS_MIN. Default definitions of those to 0 are correct
for both architectures, while ia64, m68k and x86 get their own
versions of bits/fp-logb.h to reflect their use of values different
from the defaults.
The patch renders many copies of bits/mathdef.h trivial (needed only
to avoid the default __NO_LONG_DOUBLE_MATH). I'll revise
<https://sourceware.org/ml/libc-alpha/2016-11/msg00865.html>
accordingly so that it removes all bits/mathdef.h headers except the
default one and the alpha one, and arranges for the header to be
included only by complex.h as the only remaining use at that point
will be for the alpha ABI issues there.
Tested for x86_64 and x86. Also did compile-only testing with
build-many-glibcs.py (using glibc sources from before the commit that
introduced many build failures with undefined __GI___sigsetjmp).
* bits/fp-logb.h: New file.
* sysdeps/ia64/bits/fp-logb.h: Likewise.
* sysdeps/m68k/m680x0/bits/fp-logb.h: Likewise.
* sysdeps/x86/bits/fp-logb.h: Likewise.
* math/Makefile (headers): Add bits/fp-logb.h.
* math/math.h: Include <bits/fp-logb.h>.
[__USE_ISOC99] (FP_ILOGB0): Define based on __FP_LOGB0_IS_MIN.
[__USE_ISOC99] (FP_ILOGBNAN): Define based on __FP_LOGBNAN_IS_MIN.
* bits/mathdef.h (FP_ILOGB0): Remove.
(FP_ILOGBNAN): Likewise.
* sysdeps/aarch64/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/alpha/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/ia64/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/m68k/m680x0/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/mips/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/powerpc/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/s390/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/sparc/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/x86/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
Continuing the refactoring of bits/mathdef.h, this patch moves the
FP_FAST_* definitions into a new bits/fp-fast.h header. Currently
this is only for FP_FAST_FMA*, but in future it would be the
appropriate place for the FP_FAST_* macros from TS 18661-1 as well.
The generic bits/mathdef.h header defines these macros based on
whether the compiler defines __FP_FAST_*. Most architecture-specific
headers, however, fail to do so, meaning that if the architecture (or
some particular processors) does in fact have fused operations, and
GCC knows to use them inline, the FP_FAST_* macros will still not be
defined.
By refactoring, this patch causes the generic version (based on
__FP_FAST_*) to be used in more cases, and so the macro definitions to
be more accurate. Architectures that already defined some or all of
these macros other than based on the predefines have their own
versions of fp-fast.h, which are arranged so they define FP_FAST_* if
either the architecture-specific conditions are true or __FP_FAST_*
are defined.
After this refactoring, various bits/mathdef.h headers for
architectures with long double = double are semantically identical to
the generic version. The patch removes those headers that are
redundant. (In fact two of the four removed were already redundant
before this patch because they did use __FP_FAST_*.)
Tested for x86_64 and x86, and compilation-only with
build-many-glibcs.py.
* bits/fp-fast.h: New file.
* sysdeps/aarch64/bits/fp-fast.h: Likewise.
* sysdeps/powerpc/bits/fp-fast.h: Likewise.
* math/Makefile (headers): Add bits/fp-fast.h.
* math/math.h: Include <bits/fp-fast.h>.
* bits/mathdef.h (FP_FAST_FMA): Remove.
(FP_FAST_FMAF): Likewise.
(FP_FAST_FMAL): Likewise.
* sysdeps/aarch64/bits/mathdef.h (FP_FAST_FMA): Likewise.
(FP_FAST_FMAF): Likewise.
* sysdeps/powerpc/bits/mathdef.h (FP_FAST_FMA): Likewise.
(FP_FAST_FMAF): Likewise.
* sysdeps/x86/bits/mathdef.h (FP_FAST_FMA): Likewise.
(FP_FAST_FMAF): Likewise.
(FP_FAST_FMAL): Likewise.
* sysdeps/arm/bits/mathdef.h: Remove file.
* sysdeps/hppa/fpu/bits/mathdef.h: Likewise.
* sysdeps/sh/sh4/bits/mathdef.h: Likewise.
* sysdeps/tile/bits/mathdef.h: Likewise.
At present, definitions of float_t and double_t are split among many
bits/mathdef.h headers.
For all but three architectures, these types are float and double.
Furthermore, if you assume __FLT_EVAL_METHOD__ to be defined, that
provides a more generic way of determining the correct values of these
typedefs. Defining these typedefs more generally based on
__FLT_EVAL_METHOD__ was previously proposed by Paul Eggert in
<https://sourceware.org/ml/libc-alpha/2012-02/msg00002.html>.
This patch refactors things in the way I proposed in
<https://sourceware.org/ml/libc-alpha/2016-11/msg00745.html>. A new
header bits/flt-eval-method.h defines a single macro,
__GLIBC_FLT_EVAL_METHOD, which is then used by math.h to define
float_t and double_t. The default is based on __FLT_EVAL_METHOD__
(although actually a default to 0 would have the same effect for
current ports, because ports where values other than 0 or 16 are
possible all have their own headers).
To avoid changing the existing semantics in any case, including for
compilers not defining __FLT_EVAL_METHOD__, architecture-specific
files are then added for m68k, s390, x86 which replicate the existing
semantics. At least with __FLT_EVAL_METHOD__ values possible with
GCC, there should be no change to the choices of float_t and double_t
for any supported configuration.
Architecture maintainer notes:
* m68k: sysdeps/m68k/m680x0/bits/flt-eval-method.h always defines
__GLIBC_FLT_EVAL_METHOD to 2 to replicate the existing logic. But
actually GCC defines __FLT_EVAL_METHOD__ to 0 if TARGET_68040. It
might make sense to make the header prefer to base things on
__FLT_EVAL_METHOD__ if defined, like the x86 version, and so make
the choices of these types more accurate (with a NEWS entry as for
the other changes to these types on particular architectures).
* s390: sysdeps/s390/bits/flt-eval-method.h always defines
__GLIBC_FLT_EVAL_METHOD to 1 to replicate the existing logic. As
previously discussed, it might make sense in coordination with GCC
to eliminate the historic mistake, avoid excess precision in the
-fexcess-precision=standard case and make the typedefs match (with a
NEWS entry, again).
Tested for x86-64 and x86. Also did compilation-only testing with
build-many-glibcs.py.
* bits/flt-eval-method.h: New file.
* sysdeps/m68k/m680x0/bits/flt-eval-method.h: Likewise.
* sysdeps/s390/bits/flt-eval-method.h: Likewise.
* sysdeps/x86/bits/flt-eval-method.h: Likewise.
* math/Makefile (headers): Add bits/flt-eval-method.h.
* math/math.h: Include <bits/flt-eval-method.h>.
[__USE_ISOC99] (float_t): Define based on __GLIBC_FLT_EVAL_METHOD.
[__USE_ISOC99] (double_t): Likewise.
* bits/mathdef.h (float_t): Remove.
(double_t): Likewise.
* sysdeps/aarch64/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/alpha/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/arm/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/hppa/fpu/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/ia64/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/m68k/m680x0/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/mips/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/powerpc/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/s390/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/sh/sh4/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/sparc/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/tile/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/x86/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
TS 18661-1 defines a type femode_t to represent the set of dynamic
floating-point control modes (such as the rounding mode and trap
enablement modes), and functions fegetmode and fesetmode to manipulate
those modes (without affecting other state such as the raised
exception flags) and a corresponding macro FE_DFL_MODE.
This patch series implements those interfaces for glibc. This first
patch adds the architecture-independent pieces, the x86 and x86_64
implementations, and the <bits/fenv.h> and ABI baseline updates for
all architectures so glibc keeps building and passing the ABI tests on
all architectures. Subsequent patches add the fegetmode and fesetmode
implementations for other architectures.
femode_t is generally an integer type - the same type as fenv_t, or as
the single element of fenv_t where fenv_t is a structure containing a
single integer (or the single relevant element, where it has elements
for both status and control registers) - except where architecture
properties or consistency with the fenv_t implementation indicate
otherwise. FE_DFL_MODE follows FE_DFL_ENV in whether it's a magic
pointer value (-1 cast to const femode_t *), a value that can be
distinguished from valid pointers by its high bits but otherwise
contains a representation of the desired register contents, or a
pointer to a constant variable (the powerpc case; __fe_dfl_mode is
added as an exported constant object, an alias to __fe_dfl_env).
Note that where architectures (that share a register between control
and status bits) gain definitions of new floating-point control or
status bits in future, the implementations of fesetmode for those
architectures may need updating (depending on whether the new bits are
control or status bits and what the implementation does with
previously unknown bits), just like existing implementations of
<fenv.h> functions that take care not to touch reserved bits may need
updating when the set of reserved bits changes. (As any new bits are
outside the scope of ISO C, that's just a quality-of-implementation
issue for supporting them, not a conformance issue.)
As with fenv_t, femode_t should properly include any software DFP
rounding mode (and for both fenv_t and femode_t I'd consider that
fragment of DFP support appropriate for inclusion in glibc even in the
absence of the rest of libdfp; hardware DFP rounding modes should
already be included if the definitions of which bits are status /
control bits are correct).
Tested for x86_64, x86, mips64 (hard float, and soft float to test the
fallback version), arm (hard float) and powerpc (hard float, soft
float and e500). Other architecture versions are untested.
* math/fegetmode.c: New file.
* math/fesetmode.c: Likewise.
* sysdeps/i386/fpu/fegetmode.c: Likewise.
* sysdeps/i386/fpu/fesetmode.c: Likewise.
* sysdeps/x86_64/fpu/fegetmode.c: Likewise.
* sysdeps/x86_64/fpu/fesetmode.c: Likewise.
* math/fenv.h: Update comment on inclusion of <bits/fenv.h>.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (fegetmode): New function
declaration.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (fesetmode): Likewise.
* bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New
typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/aarch64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/alpha/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/arm/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/hppa/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/ia64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/m68k/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/microblaze/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/mips/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/nios2/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/powerpc/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (__fe_dfl_mode): New variable
declaration.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/s390/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/sh/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/sparc/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/tile/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/x86/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* manual/arith.texi (FE_DFL_MODE): Document macro.
(fegetmode): Document function.
(fesetmode): Likewise.
* math/Versions (fegetmode): New libm symbol at version
GLIBC_2.25.
(fesetmode): Likewise.
* math/Makefile (libm-support): Add fegetmode and fesetmode.
(tests): Add test-femode and test-femode-traps.
* math/test-femode-traps.c: New file.
* math/test-femode.c: Likewise.
* sysdeps/powerpc/fpu/fenv_const.c (__fe_dfl_mode): Declare as
alias for __fe_dfl_env.
* sysdeps/powerpc/nofpu/fenv_const.c (__fe_dfl_mode): Likewise.
* sysdeps/powerpc/powerpc32/e500/nofpu/fenv_const.c
(__fe_dfl_mode): Likewise.
* sysdeps/powerpc/Versions (__fe_dfl_mode): New libm symbol at
version GLIBC_2.25.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
The operand modifier %s on powerpc is an undocumented internal implementation
detail of GCC. Besides that, the GCC community wants to remove it. This patch
rewrites the expressions that use this modifier with logically equivalent
expressions that don't require it.
Explanation for the substitution:
The %s modifier takes an immediate operand and prints 32 less such immediate.
Thus, in the previous code, the expression resulted in:
32 - __builtin_ffs(e)
where e was guaranteed to have exactly a single bit set, by the following
expressions:
(e & (e-1) == 0) : e has at most one bit set.
(e != 0) : e is not zero, thus it has at least one bit set.
Since we guarantee that there is exactly only one bit set, the following
statement is true:
32 - __builtin_ffs(e) == __builtin_clz(e)
Thus, we can replace __builtin_ffs with __builtin_clz and remove the %s operand
modifier.
It was noted in
<https://sourceware.org/ml/libc-alpha/2012-09/msg00305.html> that the
bits/*.h naming scheme should only be used for installed headers.
This patch renames bits/atomic.h to atomic-machine.h to follow that
convention.
This is the only change in this series that needs to change the
filename rather than simply removing a directory level (because both
atomic.h and bits/atomic.h exist at present).
Tested for x86_64 (testsuite, and that installed stripped shared
libraries are unchanged by the patch).
[BZ #14912]
* sysdeps/aarch64/bits/atomic.h: Move to ...
* sysdeps/aarch64/atomic-machine.h: ...here.
(_AARCH64_BITS_ATOMIC_H): Rename macro to
_AARCH64_ATOMIC_MACHINE_H.
* sysdeps/alpha/bits/atomic.h: Move to ...
* sysdeps/alpha/atomic-machine.h: ...here.
* sysdeps/arm/bits/atomic.h: Move to ...
* sysdeps/arm/atomic-machine.h: ...here. Update comments.
* bits/atomic.h: Move to ...
* sysdeps/generic/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/i386/bits/atomic.h: Move to ...
* sysdeps/i386/atomic-machine.h: ...here.
* sysdeps/ia64/bits/atomic.h: Move to ...
* sysdeps/ia64/atomic-machine.h: ...here.
* sysdeps/m68k/coldfire/bits/atomic.h: Move to ...
* sysdeps/m68k/coldfire/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/m68k/m680x0/m68020/bits/atomic.h: Move to ...
* sysdeps/m68k/m680x0/m68020/atomic-machine.h: ...here.
* sysdeps/microblaze/bits/atomic.h: Move to ...
* sysdeps/microblaze/atomic-machine.h: ...here.
* sysdeps/mips/bits/atomic.h: Move to ...
* sysdeps/mips/atomic-machine.h: ...here.
(_MIPS_BITS_ATOMIC_H): Rename macro to _MIPS_ATOMIC_MACHINE_H.
* sysdeps/powerpc/bits/atomic.h: Move to ...
* sysdeps/powerpc/atomic-machine.h: ...here. Update comments.
* sysdeps/powerpc/powerpc32/bits/atomic.h: Move to ...
* sysdeps/powerpc/powerpc32/atomic-machine.h: ...here. Update
comments. Include <atomic-machine.h> instead of <bits/atomic.h>.
* sysdeps/powerpc/powerpc64/bits/atomic.h: Move to ...
* sysdeps/powerpc/powerpc64/atomic-machine.h: ...here. Include
<atomic-machine.h> instead of <bits/atomic.h>.
* sysdeps/s390/bits/atomic.h: Move to ...
* sysdeps/s390/atomic-machine.h: ...here.
* sysdeps/sparc/sparc32/bits/atomic.h: Move to ...
* sysdeps/sparc/sparc32/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/sparc/sparc32/sparcv9/bits/atomic.h: Move to ...
* sysdeps/sparc/sparc32/sparcv9/atomic-machine.h: ...here.
* sysdeps/sparc/sparc64/bits/atomic.h: Move to ...
* sysdeps/sparc/sparc64/atomic-machine.h: ...here.
* sysdeps/tile/bits/atomic.h: Move to ...
* sysdeps/tile/atomic-machine.h: ...here.
* sysdeps/tile/tilegx/bits/atomic.h: Move to ...
* sysdeps/tile/tilegx/atomic-machine.h: ...here. Include
<sysdeps/tile/atomic-machine.h> instead of
<sysdeps/tile/bits/atomic.h>.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/tile/tilepro/bits/atomic.h: Move to ...
* sysdeps/tile/tilepro/atomic-machine.h: ...here. Include
<sysdeps/tile/atomic-machine.h> instead of
<sysdeps/tile/bits/atomic.h>.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/unix/sysv/linux/arm/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/arm/atomic-machine.h: ...here. Include
<sysdeps/arm/atomic-machine.h> instead of
<sysdeps/arm/bits/atomic.h>.
* sysdeps/unix/sysv/linux/hppa/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/hppa/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/unix/sysv/linux/m68k/coldfire/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/m68k/coldfire/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/unix/sysv/linux/nios2/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/nios2/atomic-machine.h: ...here.
(_NIOS2_BITS_ATOMIC_H): Rename macro to _NIOS2_ATOMIC_MACHINE_H.
* sysdeps/unix/sysv/linux/sh/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/sh/atomic-machine.h: ...here.
* sysdeps/x86_64/bits/atomic.h: Move to ...
* sysdeps/x86_64/atomic-machine.h: ...here.
* include/atomic.h: Include <atomic-machine.h> instead of
<bits/atomic.h>.
Linux commit b4b56f9ecab40f3b4ef53e130c9f6663be491894 introduced
a new HWCAP2 bit to indicate that the kernel now aborts a memory
transaction when a syscall is made. This patch adds that bit to
sysdeps/powerpc/bits/hwcap.h.
2015-08-26 Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
* sysdeps/powerpc/bits/hwcap.h: Add PPC_FEATURE2_HTM_NOSC.
* sysdeps/powerpc/dl-procinfo.c:
(_dl_powerpc_cap_flags): Added descriptor for this hwcap
feature so it shows when LD_SHOW_AUXV=1.
This patch fixes the inline feraiseexcept and feclearexcept macros for
powerpc by casting the input argument to integer before operation on it.
It fixes BZ#17776.
The natural fix for some linknamespace test failures, where C90 libm
functions call C99 <fenv.h> functions, is to make fe* into weak
aliases for __fe* and call __fe* from within libm as needed.
To do this, the __fe* names need to be available for that purpose -
that is, they must not be used for something other than aliases of
fe*. On powerpc, however, __fegetround is an inline function in
fenv_libc.h, with no corresponding fegetround inline function;
fegetround has an equivalent macro expansion in bits/fenvinline.h, but
that is disabled if __NO_MATH_INLINES (which is defined for building
libm).
I see no need for that disabling; it's not even clear that
__NO_MATH_INLINES should affect <fenv.h>, and the results of
fegetround are completely defined so there is no semantic effect of
that disabling at all outside glibc. The x86 inline feraiseexcept is
conditioned on __USE_EXTERN_INLINES not __NO_MATH_INLINES (but that's
an inline function rather than a macro).
This patch removes the __NO_MATH_INLINES conditional on that
fegetround macro, so resulting in it being expanded inline inside
glibc. In turn, this means that direct calls to __fegetround from C99
functions in ldbl-128ibm can be changed to calls to fegetround, so
that nofpu fenv_libc.h files don't need to define __fegetround at all
and, by changing ldbl-128ibm files to use <fenv.h> not <fenv_libc.h>,
non-e500 nofpu no longer needs an fenv_libc.h file.
The other macros in fenvinline.h are left conditional on
__NO_MATH_INLINES, although since the only case where this should make
a difference is one involving undefined behavior (if the argument to
the function is not a valid exception macro).
The out-of-line definition for fegetround uses __fegetround (the
inline function removed by this patch). So this continues to work,
the fenvinline.h header is made to define __fegetround, and then to
define fegetround to call __fegetround.
Tested for powerpc32 (hard float) that installed stripped shared
libraries are unchanged by this patch; also tested that powerpc-nofpu
build still works. (This patch does not itself fix any bugs; it
simply cleans things up in preparation for separate bug fixes.)
* sysdeps/powerpc/bits/fenvinline.h (fegetround): Rename macro to
__fegetround and redefine to call __fegetround. Remove condition
on [!__NO_MATH_INLINES].
* sysdeps/powerpc/fpu/fenv_libc.h (__fegetround): Remove inline
function.
* sysdeps/powerpc/nofpu/fenv_libc.h: Remove file.
* sysdeps/powerpc/powerpc32/e500/nofpu/fenv_libc.h (__fegetround):
Remove macro.
* sysdeps/ieee754/ldbl-128ibm/s_llrintl.c: Include <fenv.h>
instead of <fenv_libc.h>.
(__llrintl): Call fegetround instead of __fegetround.
* sysdeps/ieee754/ldbl-128ibm/s_llroundl.c: Include <fenv.h>
instead of <fenv_libc.h>.
* sysdeps/ieee754/ldbl-128ibm/s_lrintl.c: Likewise.
(__lrintl): Call fegetround instead of __fegetround.
* sysdeps/ieee754/ldbl-128ibm/s_lroundl.c: Include <fenv.h>
instead of <fenv_libc.h>.
* sysdeps/ieee754/ldbl-128ibm/s_rintl.c: Likewise.
(__rintl): Call fegetround instead of __fegetround.
On powerpc, atomic_exchange_and_add is implemented without any
barriers. This patchs adds the missing instruction and memory barrier
for acquire and release semanthics.
Linux commit dd58a092c4202f2bd490adab7285b3ff77f8e467 added the
PPC_FEATURE2_VEC_CRYPTO auvx capability to indicate whether to
hardware supports vector crypto hardware instructions. This patch
adds its definition to powerpc hwcap bits.
elf/tst-auxv.c includes misc/sys/auxv.h, which ends up not actually
being included due to the guard overlap, and getauxval becomes an
implicit declaration and implicit pointer conversion which means, at
best, the test isn't actually testing what it thinks it is and, at
worst, it'll crash and burn on platforms where implict pointer
conversion is a Very Bad Thing.
* sysdeps/powerpc/bits/hwcap.h: Allow _SYSDEPS_SYSDEP_H guard as a
synonym for _SYS_AUXV_H to allow direct inclusion.
* sysdeps/sparc/bits/hwcap.h: Likewise.
* sysdeps/powerpc/sysdep.h: Define _SYSDEPS_SYSDEP_H instead of
_SYS_AUXV_H so we can include sysdep.h and sys/auxv.h together.
* sysdeps/sparc/sysdep.h: Likewise.
The ELFv2 ABI changes the calling convention by passing and returning
structures in registers in more cases than the old ABI:
http://gcc.gnu.org/ml/gcc-patches/2013-11/msg01145.htmlhttp://gcc.gnu.org/ml/gcc-patches/2013-11/msg01147.html
For the most part, this does not affect glibc, since glibc assembler
files do not use structure parameters / return values. However, one
place is affected: the LD_AUDIT interface provides a structure to
the audit routine that contains all registers holding function
argument and return values for the intercepted PLT call.
Since the new ABI now sometimes uses registers to return values
that were never used for this purpose in the old ABI, this structure
has to be extended. To force audit routines to be modified for the
new ABI if necessary, the patch defines v2 variants of the la_ppc64
types and routines.
In addition, the patch contains two unrelated changes to the
PLT trampoline routines: it fixes a bug where FPR return values
were stored in the wrong place, and it removes the unnecessary
save/restore of CR.
__fe_nomask_env.
* sysdeps/powerpc/fpu/fe_nomask.c: Add libm_hidden_def.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/fe_nomask.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/fpu/fe_nomask.c: Likewise.
* sysdeps/powerpc/bits/fenv.h: Make safe for C++.
* sysdeps/unix/sysv/linux/powerpc/bits/mathinline.h: New file.
* sysdeps/powerpc/fpu/fegetexcept.c (__fegetexcept): Rename
function from fegetexcept and make old name weak alias.
* include/fenv.h: Declare __fegetexcept.
* sysdeps/powerpc/fpu/fedisblxcpt.c: Use __fegetexcept instead of
fegetexcept.
* sysdeps/powerpc/fpu/feenablxcpt.c: Likewise.
* sysdeps/powerpc/fpu/fraiseexcpt.c (__feraiseexcept): Avoid call
to fetestexcept.
* sysdeps/ieee754/ldbl-128ibm/s_log1pl.c (__log1pl): Use __frexpl
instead of frexpl to avoid local PLT.
* math/s_significandl.c (__significandl): Use __ilogbl instead of
ilogbl to avoid local PLT.
* sysdeps/ieee754/ldbl-128ibm/s_expm1l.c (__expm1l): Use __ldexpl
instead of ldexpl to avoid local PLT.
* sysdeps/ieee754/ldbl-128ibm/e_expl.c (__ieee754_expl): Use
__roundl not roundl to avoid local PLT.
* sysdeps/ieee754/ldbl-128/e_j0l.c: Use function names which avoid
local PLTs. Use __sincosl instead of separate sinl and cosl
calls.
* sysdeps/ieee754/ldbl-128/e_j1l.c: Likewise.
Peter Bergner <bergner@us.ibm.com>
* sysdeps/powerpc/bits/fenv.h: Declare __fe_mask_env extern.
Define FE_NOMASK_ENV as FE_EANBLED_ENV. Define FE_MASK_ENV.
* sysdeps/powerpc/fpu/Makefile: Add fe_mask to libm-support.
* sysdeps/powerpc/fpu/fe_mask.c: New file.
* sysdeps/powerpc/fpu/fe_nomask.c: Correct comment.
* sysdeps/powerpc/fpu/fedisblxcpt.c (fedisableexcept):
Call __fe_mask_env() if all FP exceptions disabled.
* sysdeps/powerpc/fpu/feholdexcpt.c (feholdexcept): Copy high 32-bits
from old FPSCR to new fenv to propagate DFP rounding modes.
Call __fe_mask_env() if FP exceptions previously enabled.
* sysdeps/powerpc/fpu/fesetenv.c (fesetenv): Change mask to merge
exceptions from env. Use __fe_nomask_env() or __fe_mask_env() when
transitioning from all exceptions disabled to any exception enabled
or visa versa.
* sysdeps/powerpc/fpu/feupdateenv.c (__feupdateenv): Change mask to
merge exceptions from env. Call __fe_nomask_env or __fe_mask_env
when transitioning from all exceptions disabled to any exception
enabled or visa versa.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fe_nomask.c: Moved to...
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/fe_nomask.c: ...here.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/fe_nomask.c: Moved to...
* sysdeps/unix/sysv/linux/powerpc/powerpc64/fpu/fe_nomask.c: ...here.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/fe_mask.c: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/fpu/fe_mask.c: New file.
* math/multc3.c: New file.
* sysdeps/unix/sysv/linux/sparc/sparc32/Makefile
[$(subdir) = math] (libm-routines): Add multc3, divtc3.
* sysdeps/unix/sysv/linux/sparc/sparc32/fpu/Implies: New file.
* sysdeps/sparc/sparc32/fpu/s_fabsl.c: Include math.h and
math_ldbl_opt.h.
(fabsl): Use long_double_symbol instead of weak_alias.
* sysdeps/sparc/sparc32/fpu/s_fabs.c: Include math.h and
math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (fabsl): Add compat_symbol.
2006-01-31 Martin Schwidefsky <schwidefsky@de.ibm.com>
Jakub Jelinek <jakub@redhat.com>
* sysdeps/unix/sysv/linux/s390/Implies: New file.
* sysdeps/unix/sysv/linux/s390/fpu/Implies: New file.
* sysdeps/unix/sysv/linux/s390/nldbl-abi.h: New file.
* sysdeps/s390/fpu/bits/mathinline.h (signbitl, sqrtl): New inlines.
* sysdeps/s390/bits/mathdef.h: New file.
* sysdeps/s390/fpu/e_sqrtl.c: New file.
* sysdeps/s390/s390-32/bits/wordsize.h (__LONG_DOUBLE_MATH_OPTIONAL,
__NO_LONG_DOUBLE_MATH): Define.
* sysdeps/s390/s390-64/bits/wordsize.h: Likewise.
* sysdeps/s390/Implies: Add ieee754/ldbl-128.
* sysdeps/s390/ldbl2mpn.c: File removed.
* sysdeps/s390/fpu/libm-test-ulps: Updated.
2006-01-31 Roland McGrath <roland@redhat.com>
* sysdeps/alpha/fpu/bits/mathdef.h: Moved to ...
* sysdeps/alpha/bits/mathdef.h: ... here.
* sysdeps/i386/fpu/bits/mathdef.h: Moved to ...
* sysdeps/i386/bits/mathdef.h: ... here.
* sysdeps/mips/fpu/bits/mathdef.h: Moved to ...
* sysdeps/mips/bits/mathdef.h: ... here.
* sysdeps/m68k/fpu/bits/mathdef.h: Moved to ...
* sysdeps/m68k/bits/mathdef.h: ... here.
* sysdeps/powerpc/fpu/bits/mathdef.h: Moved to ...
* sysdeps/powerpc/bits/mathdef.h: ... here.
* sysdeps/sparc/fpu/bits/mathdef.h: Moved to ...
* sysdeps/sparc/bits/mathdef.h: ... here.
* sysdeps/ia64/fpu/bits/mathdef.h: Moved to ...
* sysdeps/ia64/bits/mathdef.h: ... here.
* sysdeps/sh/sh4/fpu/bits/mathdef.h: Moved to ...
* sysdeps/sh/sh4/bits/mathdef.h: ... here.
* sysdeps/x86_64/fpu/bits/mathdef.h: Moved to ...
* sysdeps/x86_64/bits/mathdef.h: ... here.
2006-01-31 Jakub Jelinek <jakub@redhat.com>
