It allows to read directories using the six readdir variants
without writing type-specific code or using skeleton files
that are compiled four times.
The readdir_r subtest for support_readdir_expect_error revealed
bug 32124.
Reviewed-by: DJ Delorie <dj@redhat.com>
This allows to monitor the exact file system operations
performed by glibc and inject errors.
Hurd does not have <sys/mount.h>. To get the sources to compile
at least, the same approach as in support/test-container.c is used.
Reviewed-by: DJ Delorie <dj@redhat.com>
Use static functions for readdir/readdir_r, so that
-D_FILE_OFFSET_BITS=64 does not improperly redirect calls to the wrong
implementation.
Reviewed-by: DJ Delorie <dj@redhat.com>
And include the required licensing information. The only
change is a removed trailing empty line in
LICENSES/exceptions/Linux-syscall-note.
Bundling <linux/fuse.h> is the recommended way to deal with
the evolution of the FUSE userspace interface because
structs change sizes over time. The kernel maintains
compatibility, but source-level compatibility on recompilation
may require additional code that is aware of older struct sizes.
Signed-off-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: DJ Delorie <dj@redhat.com>
Macros will automatically use the correct types, without
having to fiddle with internal glibc macros. It's also
impossible to get the types wrong due to aliasing because
support_check_stat_fd and support_check_stat_path do not
depend on the struct stat* types.
The changes reveal some inconsistencies in tests.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This is currently implied by the internal headers, but it makes
sense not to rely on this.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This is not needed: include/intprops.h has its own detection logic.
It makes building these files outside of glibc easer.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Add a FAIL test failure helper analogous to FAIL_RET, that does not
cause the current function to return, providing a standardized way to
report a test failure with a message supplied while permitting the
caller to continue executing, for further reporting, cleaning up, etc.
Update existing test cases that provide a conflicting definition of FAIL
by removing the local FAIL definition and then as follows:
- tst-fortify-syslog: provide a meaningful message in addition to the
file name already added by <support/check.h>; 'support_record_failure'
is already called by 'support_print_failure_impl' invoked by the new
FAIL test failure helper.
- tst-ctype: no update to FAIL calls required, with the name of the file
and the line number within of the failure site additionally included
by the new FAIL test failure helper, and error counting plus count
reporting upon test program termination also already provided by
'support_record_failure' and 'support_report_failure' respectively,
called by 'support_print_failure_impl' and 'adjust_exit_status' also
respectively. However in a number of places 'printf' is called and
the error count adjusted by hand, so update these places to make use
of FAIL instead. And last but not least adjust the final summary just
to report completion, with any error count following as reported by
the test driver.
- test-tgmath2: no update to FAIL calls required, with the name of the
file of the failure site additionally included by the new FAIL test
failure helper. Also there is no need to track the return status by
hand as any call to FAIL will eventually cause the test case to return
an unsuccesful exit status regardless of the return status from the
test function, via a call to 'adjust_exit_status' made by the test
driver.
Reviewed-by: DJ Delorie <dj@redhat.com>
The error message in xgetsockname was incorrectly referring to a
different function. This commit fixes that.
Suggested-by: Arjun Shankar <arjun@redhat.com>
Signed-off-by: Avinal Kumar <avinal.xlvii@gmail.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was raised on libc-help [1] that some Linux kernel interfaces expect
the libc to define __USE_TIME_BITS64 to indicate the time_t size for the
kABI. Different than defined by the initial y2038 design document [2],
the __USE_TIME_BITS64 is only defined for ABIs that support more than
one time_t size (by defining the _TIME_BITS for each module).
The 64 bit time_t redirects are now enabled using a different internal
define (__USE_TIME64_REDIRECTS). There is no expected change in semantic
or code generation.
Checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu, and
arm-linux-gnueabi
[1] https://sourceware.org/pipermail/libc-help/2024-January/006557.html
[2] https://sourceware.org/glibc/wiki/Y2038ProofnessDesign
Reviewed-by: DJ Delorie <dj@redhat.com>
For container tests, gdb needs to set the sysroot to the corresponding
testroot.root directory. The assumption was that PIDs < 3 means that
we are running within a container.
Starting with commit 2fe64148a8
"Allow for unpriviledged nested containers", the default is to use
the PID namespace of the parent. Thus support_test_main.c does not
recognize our container anymore.
This patch now assumes that we are running inside a container if
test-container.c has set PID_OUTSIDE_CONTAINER and always uses this
PID independent of having a new PID namespace or not.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
If the binary to run is 'env', test-containers skips it and adds
any required environment variable on the process envs variables.
This simplifies the required code to spawn new process (no need
to build an env-like program).
However, this is an issue for recursive_remove if there is any
LD_PRELOAD, since test-container will not prepend the loader command
along with required paths. If the required preloaded library can
not be loaded by the system glibc, the 'post-clean rsync' will
eventually fail.
One example is if system glibc does not support DT_RELR and the
built glibc does, the nss/tst-nss-gai-hv2-canonname test fails
with:
../scripts/evaluate-test.sh nss/tst-nss-gai-hv2-canonname $? false false
86_64-linux-gnu/nss/tst-nss-gai-hv2-canonname.test-result
rm: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_ABI_DT_RELR' not
found (required by x86_64-linux-gnu/malloc/libc_malloc_debug.so)
Instead trying to figure out the required loader arguments on how
to spawn the 'rm -rf', replace the command with a nftw call.
Checked on x86_64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Stefan Liebler <stli@linux.ibm.com>
Changing tst-cleanup4.c to use xread instead of read caused
the nptl/tst-cleanupx4 test to fail. The routines in libsupport.a
need to be built with exception handling and asynchronous unwind
table support.
v2: Use "CFLAGS-.oS" instead of "override CFLAGS".
With fortification enabled, system calls return result needs to be checked,
has it gets the __wur macro enabled.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
With fortification enabled, read calls return result needs to be checked,
has it gets the __wur macro enabled.
Note on read call removal from sysdeps/pthread/tst-cancel20.c and
sysdeps/pthread/tst-cancel21.c:
It is assumed that this second read call was there to overcome the race
condition between pipe closure and thread cancellation that could happen
in the original code. Since this race condition got fixed by
d0e3ffb7a5 the second call seems
superfluous. Hence, instead of checking for the return value of read, it
looks reasonable to simply remove it.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
With fortification enabled, fgets calls return result needs to be checked,
has it gets the __wur macro enabled.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
With fortification enabled, fread calls return result needs to be checked,
has it gets the __wur macro enabled.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
With fortification enabled, few function calls return result need to be
checked, has they get the __wur macro enabled.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
In some cases (e.g. when podman creates user containers), the only other
group assigned to the executing user is nobody and fchown fails with it
because the group is not mapped. Do not fail the test in this case,
instead exit as unsupported.
Reported-by: Frédéric Bérat <fberat@redhat.com>
Tested-by: Frédéric Bérat <fberat@redhat.com>
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Add list end markers.
Sort text using scripts/sort-makefile-lines.py.
No code generation changes observed in non-test binary artifacts.
No regressions on x86_64 and i686.
Prevent sh from interpreting a user string as shell options if it
starts with '-' or '+'. Since the version of /bin/sh used for testing
system() is different from the full-fledged system /bin/sh add support
to it for handling "--" after "-c". Add a testcase to ensure the
expected behavior.
Signed-off-by: Joe Simmons-Talbott <josimmon@redhat.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Fix bug that SIGCHLD is erroneously blocked forever in the following
scenario:
1. Thread A calls system but hasn't returned yet
2. Thread B calls another system but returns
SIGCHLD would be blocked forever in thread B after its system() returns,
even after the system() in thread A returns.
Although POSIX does not require, glibc system implementation aims to be
thread and cancellation safe. This bug was introduced in
5fb7fc9635 when we moved reverting signal
mask to happen when the last concurrently running system returns,
despite that signal mask is per thread. This commit reverts this logic
and adds a test.
Signed-off-by: Adam Yi <ayi@janestreet.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
C2x adds binary integer constants starting with 0b or 0B, and supports
those constants for the %i scanf format (in addition to the %b format,
which isn't yet implemented for scanf in glibc). Implement that scanf
support for glibc.
As with the strtol support, this is incompatible with previous C
standard versions, in that such an input string starting with 0b or 0B
was previously required to be parsed as 0 (with the rest of the input
potentially matching subsequent parts of the scanf format string).
Thus this patch adds 12 new __isoc23_* functions per long double
format (12, 24 or 36 depending on how many long double formats the
glibc configuration supports), with appropriate header redirection
support (generally very closely following that for the __isoc99_*
scanf functions - note that __GLIBC_USE (DEPRECATED_SCANF) takes
precedence over __GLIBC_USE (C2X_STRTOL), so the case of GNU
extensions to C89 continues to get old-style GNU %a and does not get
this new feature). The function names would remain as __isoc23_* even
if C2x ends up published in 2024 rather than 2023.
When scanf %b support is added, I think it will be appropriate for all
versions of scanf to follow C2x rules for inputs to the %b format
(given that there are no compatibility concerns for a new format).
Tested for x86_64 (full glibc testsuite). The first version was also
tested for powerpc (32-bit) and powerpc64le (stdio-common/ and wcsmbs/
tests), and with build-many-glibcs.py.
From the tests point of view, this is a necessary step for another
patch [1] and allows parsing macros such as "#define A | B". Without
it, a few tests [2] choke when the other patch [1] is applied:
/src/glibc/scripts/../elf/elf.h:4167: error: uninterpretable macro
token sequence: ( EF_ARC_MACH_MSK | EF_ARC_OSABI_MSK )
Traceback (most recent call last):
File "/src/glibc/elf/tst-glibcelf.py", line 23, in <module>
import glibcelf
File "/src/glibc/scripts/glibcelf.py", line 226, in <module>
_elf_h = _parse_elf_h()
^^^^^^^^^^^^^^
File "/src/glibc/scripts/glibcelf.py", line 223, in _parse_elf_h
raise IOError('parse error in elf.h')
OSError: parse error in elf.h
[1] ARC: update definitions in elf/elf.h
https://sourceware.org/pipermail/libc-alpha/2022-November/143503.html
[2]
tst-glibcelf, tst-relro-ldso, and tst-relro-libc
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Shahab Vahedi <shahab@synopsys.com>
Since Linux 4.9, the kernel provides
/proc/sys/user/max_{mnt,pid,user}_namespace as a limitation of number of
namespaces. Some distros (for example, Slint Linux 14.2.1) set them (or
only max_user_namespace) to zero as a "security policy" for disabling
namespaces.
The clone() call will set errno to ENOSPC under such a limitation. We
didn't check ENOSPC in the code so the test will FAIL, and report:
unable to unshare user/fs: No space left on device
This message is, unfortunately, very unhelpful. It leads people to
check the memory or disk space, instead of finding the real issue.
To improve the situation, we should check for ENOSPC and return
UNSUPPORTED as the test result. Also refactor check_for_unshare_hints()
to emit a proper message telling people how to make the test work, if
they really need to run the namespaced tests.
Reported-by: Philippe Delavalade <philippe.delavalade@orange.fr>
URL: https://lists.linuxfromscratch.org/sympa/arc/lfs-support/2022-06/msg00022.html
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Reviewed-by: DJ Delorie <dj@redhat.com>
It makes sense to include the owner name (LHS) and record type in the
output, so that they can be checked for correctness.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
