Commit Graph

11 Commits

Author SHA1 Message Date
Paul Eggert
dff8da6b3e Update copyright dates with scripts/update-copyrights 2024-01-01 10:53:40 -08:00
Joseph Myers
2e0c0ff95c Remove __access_noerrno
A recent commit, apparently commit
6c6fce572f "elf: Remove /etc/suid-debug
support", resulted in localplt failures for i686-gnu and x86_64-gnu:

Missing required PLT reference: ld.so: __access_noerrno

After that commit, __access_noerrno is actually no longer used at all.
So rather than just removing the localplt expectation for that symbol
for Hurd, completely remove all definitions of and references to that
symbol.

Tested for x86_64, and with build-many-glibcs.py for i686-gnu and
x86_64-gnu.
2023-11-23 19:01:32 +00:00
Joseph Myers
6d7e8eda9b Update copyright dates with scripts/update-copyrights 2023-01-06 21:14:39 +00:00
Paul Eggert
581c785bf3 Update copyright dates with scripts/update-copyrights
I used these shell commands:

../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")

and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.

I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah.  I don't
know why I run into these diagnostics whereas others evidently do not.

remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
2022-01-01 11:40:24 -08:00
Paul Eggert
2b778ceb40 Update copyright dates with scripts/update-copyrights
I used these shell commands:

../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")

and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
2021-01-02 12:17:34 -08:00
Joseph Myers
d614a75396 Update copyright dates with scripts/update-copyrights. 2020-01-01 00:14:33 +00:00
Paul Eggert
5a82c74822 Prefer https to http for gnu.org and fsf.org URLs
Also, change sources.redhat.com to sourceware.org.
This patch was automatically generated by running the following shell
script, which uses GNU sed, and which avoids modifying files imported
from upstream:

sed -ri '
  s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g
  s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g
' \
  $(find $(git ls-files) -prune -type f \
      ! -name '*.po' \
      ! -name 'ChangeLog*' \
      ! -path COPYING ! -path COPYING.LIB \
      ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \
      ! -path manual/texinfo.tex ! -path scripts/config.guess \
      ! -path scripts/config.sub ! -path scripts/install-sh \
      ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \
      ! -path INSTALL ! -path  locale/programs/charmap-kw.h \
      ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \
      ! '(' -name configure \
            -execdir test -f configure.ac -o -f configure.in ';' ')' \
      ! '(' -name preconfigure \
            -execdir test -f preconfigure.ac ';' ')' \
      -print)

and then by running 'make dist-prepare' to regenerate files built
from the altered files, and then executing the following to cleanup:

  chmod a+x sysdeps/unix/sysv/linux/riscv/configure
  # Omit irrelevant whitespace and comment-only changes,
  # perhaps from a slightly-different Autoconf version.
  git checkout -f \
    sysdeps/csky/configure \
    sysdeps/hppa/configure \
    sysdeps/riscv/configure \
    sysdeps/unix/sysv/linux/csky/configure
  # Omit changes that caused a pre-commit check to fail like this:
  # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines
  git checkout -f \
    sysdeps/powerpc/powerpc64/ppc-mcount.S \
    sysdeps/unix/sysv/linux/s390/s390-64/syscall.S
  # Omit change that caused a pre-commit check to fail like this:
  # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline
  git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
2019-09-07 02:43:31 -07:00
Joseph Myers
04277e02d7 Update copyright dates with scripts/update-copyrights.
* All files with FSF copyright notices: Update copyright dates
	using scripts/update-copyrights.
	* locale/programs/charmap-kw.h: Regenerated.
	* locale/programs/locfile-kw.h: Likewise.
2019-01-01 00:11:28 +00:00
Adhemerval Zanella
5fb7fc9635 posix: Use posix_spawn on system
This patch uses posix_spawn on system implementation.  On Linux this has
the advantage of much lower memory consumption (usually 32 Kb minimum for
the mmap stack area).

Although POSIX does not require, glibc system implementation aims to be
thread and cancellation safe.  The cancellation code is moved to generic
implementation and enabled iff SIGCANCEL is defined (similar on how the
cancellation handler is enabled on nptl-init.c).

Checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu,
arm-linux-gnueabihf, and powerpc64le-linux-gnu.

	* sysdeps/unix/sysv/linux/spawni.c (__spawni_child): Use
	__sigismember instead of sigismember.
	* sysdeps/posix/system.c [SIGCANCEL] (cancel_handler_args,
	cancel_handler): New definitions.
	(CLEANUP_HANDLER, CLEANUP_RESET): Likewise.
	(DO_LOCK, DO_UNLOCK, INIT_LOCK, ADD_REF, SUB_REF): Remove.
	(do_system): Use posix_spawn instead of fork and execl and remove
	reentracy code.
	* sysdeps/generic/not-errno.h (__kill_noerrno): New prototype.
	* sysdeps/unix/sysv/linux/not-errno.h (__kill_noerrno): Likewise.
	* sysdeps/unix/sysv/linux/ia64/system.c: Remove file.
	* sysdeps/unix/sysv/linux/s390/system.c: Likewise.
	* sysdeps/unix/sysv/linux/sparc/system.c: Likewise.
	* sysdeps/unix/sysv/linux/system.c: Likewise.
2018-11-30 18:42:05 -02:00
Joseph Myers
688903eb3e Update copyright dates with scripts/update-copyrights.
* All files with FSF copyright notices: Update copyright dates
	using scripts/update-copyrights.
	* locale/programs/charmap-kw.h: Regenerated.
	* locale/programs/locfile-kw.h: Likewise.
2018-01-01 00:32:25 +00:00
Adhemerval Zanella
95a7339258 tunables: Use direct syscall for access (BZ#21744)
The function maybe_enable_malloc_check, which is called by
__tunables_init, calls __access_noerrno.  It isn't problem when
symbol is is in ld.so, which has a special version of __access_noerrno
without stack protector.  But when glibc is built with stack protector,
maybe_enable_malloc_check in libc.a can't call the regular version of
__access_noerrno with stack protector.

This patch changes how Linux defines the __access_noerrno to be an
inline call instead and thus preventing defining different build
rules for ld/static and shared.

	H.J. Lu  <hongjiu.lu@intel.com>
	Adhemerval Zanella  <adhemerval.zanella@linaro.org>

	[BZ #21744]
	* elf/dl-tunables.c: Include not-errno.h header.
	* include/unistd.h (__access_noerrno): Remove definition.
	* sysdeps/unix/sysv/linux/access.c (__access_noerrno): Likewise.
	* sysdeps/generic/not-errno.h: New file.
	* sysdeps/unix/sysv/linux/not-errno.h: Likewise.
2017-07-24 11:21:07 -03:00