This change makes it easier to set a breakpoint on these calls.
This also addresses the issue that including <ldsodefs.h> without
<unistd.h> does not result usable _dl_*printf macros because of the
use of the STD*_FILENO macros there.
(The private symbol for _dl_fatal_printf will go away again
once the exception handling implementation is unified between
libc and ld.so.)
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
These property values are specified by the AArch64 ELF ABI and
binutils can create binaries marked with them.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Also add the private type union pthread_attr_transparent, to reduce
the amount of casting that is required.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
pthread_attr_destroy needs to be a weak alias to avoid future
linknamespace failures.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This is part of the libpthread removal project:
<https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html>
Use __getline instead of __getdelim to avoid a localplt failure.
Likewise for __getrlimit/getrlimit.
The abilist updates were performed by:
git ls-files 'sysdeps/unix/sysv/linux/**/libc.abilist' \
| while read x ; do
echo "GLIBC_2.32 pthread_getattr_np F" >> $x
done
python3 scripts/move-symbol-to-libc.py --only-linux pthread_getattr_np
The private export of __pthread_getaffinity_np is no longer needed, but
the hidden alias still necessary so that the symbol can be exported with
versioned_symbol.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This is part of the libpthread removal project:
<https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html>
The abilist updates were performed by:
git ls-files 'sysdeps/unix/sysv/linux/**/libc.abilist' \
| while read x ; do
echo "GLIBC_2.32 pthread_getaffinity_np F" >> $x
done
python3 scripts/move-symbol-to-libc.py pthread_getaffinity_np
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This is part of the libpthread removal project:
<https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html>
The symbol did not previously exist in libc, so a new GLIBC_2.32
symbol is needed, to get correct dependency for binaries which
use the symbol but no longer link against libpthread.
The abilist updates were performed by:
git ls-files 'sysdeps/unix/sysv/linux/**/libc.abilist' \
| while read x ; do
echo "GLIBC_2.32 pthread_attr_setaffinity_np F" >> $x
done
python3 scripts/move-symbol-to-libc.py pthread_attr_setaffinity_np
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The stubs for pthread_getaffinity_np, pthread_getname_np,
pthread_setaffinity_np, pthread_setname_np are replaced, and corresponding
tests are moved.
After the removal of the NaCl port, nptl is Linux-specific, and the stubs
are no longer needed. This effectively reverts commit
c76d1ff514 ("NPTL: Add stubs for Linux-only
extension functions.").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This fixes a build error:
../sysdeps/unix/sysv/linux/ntp_gettime.c: In function ‘__ntp_gettime’:
../sysdeps/unix/sysv/linux/ntp_gettime.c:56:10: error: ‘ntv64.tai’ is used uninitialized in this function [-Werror=uninitialized]
56 | *ntv = valid_ntptimeval64_to_ntptimeval (ntv64);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The __clock_gettime internal function is not supporting 64 bit time on
architectures with __WORDSIZE == 32 and __TIMESIZE != 64 (like e.g. ARM 32
bit).
The __clock_gettime64 function shall be used instead in the glibc itself as
it supports 64 bit time on those systems.
This patch does not bring any changes to systems with __WORDSIZE == 64 as
for them the __clock_gettime64 is aliased to __clock_gettime (in
./include/time.h).
Without this, these functions appear under the node Default Thread
Attributes, which is confusing.
Eventually, the documentation should be merged with the (yet to be
documented) standardized functions.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This patch provides new __ntp_gettimex64 explicit 64 bit function for getting
time parameters via NTP interface.
The call to __adjtimex in __ntp_gettime64 function has been replaced with
direct call to __clock_adjtime64 syscall, to simplify the code.
Moreover, a 32 bit version - __ntp_gettimex has been refactored to internally
use __ntp_gettimex64.
The __ntp_gettimex is now supposed to be used on systems still supporting 32
bit time (__TIMESIZE != 64) - hence the necessary conversions between struct
ntptimeval and 64 bit struct __ntptimeval64.
Build tests:
./src/scripts/build-many-glibcs.py glibcs
Run-time tests:
- Run specific tests on ARM/x86 32bit systems (qemu):
https://github.com/lmajewski/meta-y2038 and run tests:
https://github.com/lmajewski/y2038-tests/commits/master
Above tests were performed with Y2038 redirection applied as well as without to
test the proper usage of both __ntp_gettimex64 and __ntp_gettimex.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch provides new __ntp_gettime64 explicit 64 bit function for getting
time parameters via NTP interface.
Internally, the __clock_adjtime64 syscall is used instead of __adjtimex. This
patch is necessary for having architectures with __WORDSIZE == 32 Y2038 safe.
Moreover, a 32 bit version - __ntp_gettime has been refactored to internally
use __ntp_gettime64.
The __ntp_gettime is now supposed to be used on systems still supporting 32
bit time (__TIMESIZE != 64) - hence the necessary conversions between struct
ntptimeval and 64 bit struct __ntptimeval64.
Build tests:
./src/scripts/build-many-glibcs.py glibcs
Run-time tests:
- Run specific tests on ARM/x86 32bit systems (qemu):
https://github.com/lmajewski/meta-y2038 and run tests:
https://github.com/lmajewski/y2038-tests/commits/master
Above tests were performed with Y2038 redirection applied as well as without to
test the proper usage of both __ntp_gettime64 and __ntp_gettime.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Those functions allow easy conversion between Y2038 safe, glibc internal
struct __ntptimeval64 and struct ntptimeval.
The reserved fields (i.e. __glibc_reserved{1234}) during conversion are
zeroed as well, to provide behavior similar to one in ntp_gettimex function
(where those are cleared before the struct ntptimeval is returned).
Those functions are put in Linux specific sys/timex.h file, as putting
them into glibc's local include/time.h would cause build break on HURD as
it doesn't support struct timex related syscalls.
Build tests:
./src/scripts/build-many-glibcs.py glibcs
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This type is a glibc's "internal" type to get time parameters data from
Linux kernel (NTP daemon interface). It stores time in struct __timeval64
rather than struct timeval, which makes it Y2038-proof.
Build tests:
./src/scripts/build-many-glibcs.py glibcs
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch provides new __adjtime64 explicit 64 bit function for adjusting
Linux kernel clock.
Internally, the __clock_adjtime64 syscall is used instead of __adjtimex. This
patch is necessary for having architectures with __WORDSIZE == 32 Y2038 safe.
Moreover, a 32 bit version - __adjtime has been refactored to internally use
__adjtime64.
The __adjtime is now supposed to be used on systems still supporting 32
bit time (__TIMESIZE != 64) - hence the necessary conversions between struct
timeval and 64 bit struct __timeval64.
Build tests:
./src/scripts/build-many-glibcs.py glibcs
Run-time tests:
- Run specific tests on ARM/x86 32bit systems (qemu):
https://github.com/lmajewski/meta-y2038 and run tests:
https://github.com/lmajewski/y2038-tests/commits/master
Above tests were performed with Y2038 redirection applied as well as without to
test the proper usage of both __adjtime64 and __adjtime.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch provides new ___adjtimex64 explicit 64 bit function for adjusting
Linux kernel clock.
Internally, the __clock_adjtime64 syscall is used. This patch is necessary
for having architectures with __WORDSIZE == 32 Y2038 safe.
Moreover, a 32 bit version - ___adjtimex has been refactored to internally
use ___adjtimex64.
The ___adjtimex is now supposed to be used on systems still supporting 32
bit time (__TIMESIZE != 64) - hence the necessary conversions between struct
timex and 64 bit struct __timex64.
Last but not least, in ___adjtimex64 function the __clock_adjtime syscall has
been replaced with __clock_adjtime64 to support 64 bit time on architectures
with __WORDSIZE == 32 and __TIMESIZE != 64.
Build tests:
./src/scripts/build-many-glibcs.py glibcs
Run-time tests:
- Run specific tests on ARM/x86 32bit systems (qemu):
https://github.com/lmajewski/meta-y2038 and run tests:
https://github.com/lmajewski/y2038-tests/commits/master
Above tests were performed with Y2038 redirection applied as well as without to
test the proper usage of both ___adjtimex64 and ___adjtimex.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch replaces auto generated wrapper (as described in
sysdeps/unix/sysv/linux/syscalls.list) for clock_adjtime with one which adds
extra support for reading 64 bit time values on machines with __TIMESIZE != 64.
To achieve this goal new __clock_adjtime64 explicit 64 bit function for
adjusting Linux clock has been added.
Moreover, a 32 bit version - __clock_adjtime has been refactored to internally
use __clock_adjtime64.
The __clock_adjtime is now supposed to be used on systems still supporting 32
bit time (__TIMESIZE != 64) - hence the necessary conversions between 64 bit
struct __timespec64 and struct timespec.
The new __clock_adjtime64 syscall available from Linux 5.1+ has been used, when
applicable.
Up till v5.4 in the Linux kernel there was a bug preventing this call from
obtaining correct struct's timex time.tv_sec time after time_t overflow
(i.e. not being Y2038 safe).
Build tests:
- ./src/scripts/build-many-glibcs.py glibcs
Run-time tests:
- Run specific tests on ARM/x86 32bit systems (qemu):
https://github.com/lmajewski/meta-y2038 and run tests:
https://github.com/lmajewski/y2038-tests/commits/master
Linux kernel, headers and minimal kernel version for glibc build test matrix:
- Linux v5.1 (with clock_adjtime64) and glibc build with v5.1 as
minimal kernel version (--enable-kernel="5.1.0")
The __ASSUME_TIME64_SYSCALLS flag defined.
- Linux v5.1 and default minimal kernel version
The __ASSUME_TIME64_SYSCALLS not defined, but kernel supports clock_adjtime64
syscall.
- Linux v4.19 (no clock_adjtime64 support) with default minimal kernel version
for contemporary glibc (3.2.0)
This kernel doesn't support clock_adjtime64 syscall, so the fallback to
clock_adjtime is tested.
Above tests were performed with Y2038 redirection applied as well as without
(so the __TIMESIZE != 64 execution path is checked as well).
No regressions were observed.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
During cleanup, before returning from get*_r functions, the end*ent
calls must not change errno. Otherwise, an ERANGE error from the
underlying implementation can be hidden, causing unexpected lookup
failures. This commit introduces an internal_end*ent_noerror
function which saves and restore errno, and marks the original
internal_end*ent function as warn_unused_result, so that it is used
only in contexts were errors from it can be handled explicitly.
Reviewed-by: DJ Delorie <dj@redhat.com>
This version uses vector instructions and is up to 60% faster on medium
matches and up to 90% faster on long matches, compared to the POWER7
version. A few examples:
__rawmemchr_power9 __rawmemchr_power7
Length 32, alignment 0: 2.27566 3.77765
Length 64, alignment 2: 2.46231 3.51064
Length 1024, alignment 0: 17.3059 32.6678
When CET is enabled, it is an error to dlopen a non CET enabled shared
library in CET enabled application. It may be desirable to make CET
permissive, that is disable CET when dlopening a non CET enabled shared
library. With the new --enable-cet=permissive configure option, CET is
disabled when dlopening a non CET enabled shared library.
Add DEFAULT_DL_X86_CET_CONTROL to config.h.in:
/* The default value of x86 CET control. */
#define DEFAULT_DL_X86_CET_CONTROL cet_elf_property
which enables CET features based on ELF property note.
--enable-cet=permissive it to
/* The default value of x86 CET control. */
#define DEFAULT_DL_X86_CET_CONTROL cet_permissive
which enables CET features permissively.
Update tst-cet-legacy-5a, tst-cet-legacy-5b, tst-cet-legacy-6a and
tst-cet-legacy-6b to check --enable-cet and --enable-cet=permissive.
This was originally added to support binutils older than version
2.22:
<https://sourceware.org/ml/libc-alpha/2010-12/msg00051.html>
Since 2.22 is older than the minimum required binutils version
for building glibc, we no longer need this. (The changes do
not impact the statically linked startup code.)
If we try to run constructors before relocation, this is always
a dynamic linker bug. An assert is easier to notice than a call
via an invalid function pointer (which may not even produce a valid
call stack).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Add stpcpy support to the POWER9 strcpy. This is up to 40% faster on
small strings and up to 90% faster on long relatively unaligned strings,
compared to the POWER8 version. A few examples:
__stpcpy_power9 __stpcpy_power8
Length 20, alignments in bytes 4/ 4: 2.58246 4.8788
Length 1024, alignments in bytes 1/ 6: 24.8186 47.8528
This version uses VSX store vector with length instructions and is
significantly faster on small strings and relatively unaligned large
strings, compared to the POWER8 version. A few examples:
__strcpy_power9 __strcpy_power8
Length 16, alignments in bytes 0/ 0: 2.52454 4.62695
Length 412, alignments in bytes 4/ 0: 11.6 22.9185
1. Include <dl-procruntime.c> to get architecture specific initializer in
rtld_global.
2. Change _dl_x86_feature_1[2] to _dl_x86_feature_1.
3. Add _dl_x86_feature_control after _dl_x86_feature_1, which is a
struct of 2 bitfields for IBT and SHSTK control
This fixes [BZ #25887].
Following on 00c3da43a ('sunrpc/tst-udp-timeout: Fix timeout value').
While e.g. 2.5 timeout can be represented exactly with doubles, time stamps
may not be represented that exactly, and thus with coarse-grain clocks (e.g.
10ms) we may end up with 2.499-ish values due to rounding errors.
* sunrpc/tst-udp-timeout.c (test_udp_server): Add more timeout slack.
* sunrpc/tst-udp-nonblocking.c (do_test): Likewise.
The getcpu cache was removed from the kernel in Linux 2.6.24. glibc
support from the sched_getcpu implementation was removed in commit
dd26c44403 ("Consolidate sched_getcpu").
This patch updates files coming from tzcode to tzcode 2020a.
This is mostly for better support for Internet RFC 8536, by adding
support to zic for the Expires line (new to tzcode 2020a), the -b
option (new to 2019b) and the -r option (new to 2019a).
One trivial change to other glibc was needed.
* time/tzfile.c (__tzfile_read): Adjust to tzcode private.h renaming.
* timezone/private.h, timezone/tzfile.h, timezone/version:
* timezone/zdump.c, timezone/zic.c: Update from tzcode 2020a.
This patch fixes the optimized implementation of strcpy and strnlen
on a big-endian arm64 machine.
The optimized method uses neon, which can process 128bit with one
instruction. On a big-endian machine, the bit order should be reversed
for the whole 128-bits double word. But with instuction
rev64 datav.16b, datav.16b
it reverses 64bits in the two halves rather than reversing 128bits.
There is no such instruction as rev128 to reverse the 128bits, but we
can fix this by loading the data registers accordingly.
Fixes 0237b61526e7("aarch64: Optimized implementation of strcpy") and
2911cb68ed3d("aarch64: Optimized implementation of strnlen").
Signed-off-by: Lexi Shao <shaolexi@huawei.com>
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
ISO-8859-8-based locales will need this transliteration if the locale
files contain these Unicode characters.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
GCC 8 relaxed what kind of expressions can be used in initializers,
and the previous use of static const variables relied on that. Switch
to wide (non-int) enum constants instead, which is another GCC
extension that is more widely implemented.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
After using "make update-syscall-lists" to update arch-syscall.h for
new kernel versions, sysd-syscalls will not be not be regenerated.
This will cause a compile error because the new data is not being
picked up.
Fixes commit a1bd5f8673
("Linux: Use system call tables during build").
Reviewed-by: Florian Weimer <fweimer@redhat.com>
The second call does not do anything because the data structures have
already been resized by the call that comes before the demarcation
point. Fixes commit a509eb117f
("Avoid late dlopen failure due to scope, TLS slotinfo updates
[BZ #25112]").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
There is a race between __nptl_setxid and exiting detached thread, which
causes a deadlock on stack_cache_lock. The deadlock happens in this
state:
T1: setgroups -> __nptl_setxid (holding stack_cache_lock, waiting on cmdp->cntr == 0)
T2 (detached, exiting): start_thread -> __deallocate_stack (waiting on stack_cache_lock)
more threads waiting on stack_cache_lock in pthread_create
For non-detached threads, start_thread waits for its own setxid handler to
finish before exiting. Do this for detached threads as well.
When using outline atomics (-moutline-atomics, the default for ARMv8-A
starting with GCC 10), libgcc contains an ELF constructor which calls
__getauxval. This code is built outside of glibc, so none of its
internal PLT avoidance schemes can be applied to it. This change
suppresses the elf/check-localplt failure.
The core problem here is that the filter array elements are unsigned
but the computed constants are signed. This both causes a
signededness conversion at the &= step and may cause undefined
behavior if the MSB is being modified. This patch uses unsigned
constants to avoid both cases. - DJ
The script can now be called to query the definition status of
system call numbers across all architectures, like this:
$ python3 sysdeps/unix/sysv/linux/glibcsyscalls.py query-syscall sync_file_range sync_file_range2
sync_file_range:
defined: aarch64 alpha csky hppa i386 ia64 m68k microblaze mips/mips32 mips/mips64/n32 mips/mips64/n64 nios2 riscv/rv64 s390/s390-32 s390/s390-64 sh sparc/sparc32 sparc/sparc64 x86_64/64 x86_64/x32
undefined: arm powerpc/powerpc32 powerpc/powerpc64
sync_file_range2:
defined: arm powerpc/powerpc32 powerpc/powerpc64
undefined: aarch64 alpha csky hppa i386 ia64 m68k microblaze mips/mips32 mips/mips64/n32 mips/mips64/n64 nios2 riscv/rv64 s390/s390-32 s390/s390-64 sh sparc/sparc32 sparc/sparc64 x86_64/64 x86_64/x32
This command lists the headers containing the system call numbers:
$ python3 sysdeps/unix/sysv/linux/glibcsyscalls.py list-headers
The argument parser code is based on a suggestion from Adhemerval Zanella.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Suppress or avoid warnings in tests that exercise failure modes by making
calls with invalid arguments.
Reviewed-by: DJ Delorie <dj@redhat.com>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Joseph Myers <joseph@codesourcery.com>
