Since GCC commit f31a019d1161ec78846473da743aedf49cca8c27 "Emit
funcall external declarations only if actually used.", the glibc
testsuite has failed to build for 32-bit SPARC with GCC mainline.
/scratch/jmyers/glibc-bot/install/compilers/sparc64-linux-gnu/lib/gcc/sparc64-glibc-linux-gnu/14.0.0/../../../../sparc64-glibc-linux-gnu/bin/ld: /scratch/jmyers/glibc-bot/install/compilers/sparc64-linux-gnu/lib/gcc/sparc64-glibc-linux-gnu/14.0.0/32/libgcc.a(_divsi3.o): in function `.div':
/scratch/jmyers/glibc-bot/src/gcc/libgcc/config/sparc/lb1spc.S:138: multiple definition of `.div'; /scratch/jmyers/glibc-bot/build/glibcs/sparcv9-linux-gnu/glibc/libc.a(sdiv.o):/scratch/jmyers/glibc-bot/src/glibc/gnulib/../sysdeps/sparc/sparc32/sparcv9/sdiv.S:13: first defined here
/scratch/jmyers/glibc-bot/install/compilers/sparc64-linux-gnu/lib/gcc/sparc64-glibc-linux-gnu/14.0.0/../../../../sparc64-glibc-linux-gnu/bin/ld: disabling relaxation; it will not work with multiple definitions
collect2: error: ld returned 1 exit status
make[3]: *** [../Rules:298: /scratch/jmyers/glibc-bot/build/glibcs/sparcv9-linux-gnu/glibc/nptl/tst-cancel24-static] Error 1
https://sourceware.org/pipermail/libc-testresults/2023q4/012154.html
I'm not sure of the exact sequence of undefined references that cause
first the glibc object file defining .div and then the libgcc object
file defining both .div and .udiv to be pulled in (which must have
been perturbed by that GCC change in a way that introduced the build
failure), but I think the failure illustrates that it's inherently
fragile for glibc to define symbols in separate object files that
libgcc defines in the same object file - and indeed for glibc to
redefine libgcc symbols at all, since the division into object files
shouldn't really be part of the interface between libgcc and libc.
These symbols appear to be in libc only for compatibility, maybe one
of the cases where they were accidentally exported from shared libc in
glibc 2.0 before the introduction of symbol versioning and so programs
started expecting shared libc to provide them. Thus, there is no need
to have them in static libc. Add this set of libgcc functions to
shared-only-routines so they are no longer provided in static libc.
(No change is made regarding .mul - dotmul source file - since unlike
the other symbols in this grouping, it doesn't actually appear to be a
libgcc symbol, at least in current GCC.)
Tested with build-many-glibcs.py for sparcv9-linux-gnu with GCC
mainline.
The _dl_non_dynamic_init does not parse LD_PROFILE, which does not
enable profile for dlopen objects. Since dlopen is deprecated for
static objects, it is better to remove the support.
It also allows to trim down libc.a of profile support.
Checked on x86_64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Fixes commit a61933fe27 ("sparc: Remove bzero optimization") that
after moving code jumped to the wrong label 4.
Verfied by successfully running string/test-memset on sparc32.
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Ludwig Rydberg <ludwig.rydberg@gaisler.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The libcrypt was maked to be phase out on 2.38, and a better project
already exist that provide both compatibility and better API
(libxcrypt). The sparc optimizations add the burden to extra
build-many-glibcs.py configurations.
Checked on sparc64 and sparcv9.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Bump autoconf requirement to 2.71 to allow regenerating configure on
more recent distributions. autoconf 2.71 has been in Fedora since F36
and is the current version in Debian stable (bookworm). It appears to
be current in Gentoo as well.
All sysdeps configure and preconfigure scripts have also been
regenerated; all changes are trivial transformations that do not affect
functionality.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The sparc ABI has multiple cases on how to handle JMP_SLOT relocations,
(sparc_fixup_plt/sparc64_fixup_plt). For BINDNOW, _dl_audit_symbind
will be responsible to setup the final relocation value; while for
lazy binding _dl_fixup/_dl_profile_fixup will call the audit callback
and tail cail elf_machine_fixup_plt (which will call
sparc64_fixup_plt).
This patch fixes by issuing the SPARC specific routine on bindnow and
forwarding the audit value to elf_machine_fixup_plt for lazy resolution.
It fixes the la_symbind for bind-now tests on sparc64 and sparcv9:
elf/tst-audit24a
elf/tst-audit24b
elf/tst-audit24c
elf/tst-audit24d
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
And make always supported. The configure option was added on glibc 2.25
and some features require it (such as hwcap mask, huge pages support, and
lock elisition tuning). It also simplifies the build permutations.
Changes from v1:
* Remove glibc.rtld.dynamic_sort changes, it is orthogonal and needs
more discussion.
* Cleanup more code.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
This makes it more likely that the compiler can compute the strlen
argument in _startup_fatal at compile time, which is required to
avoid a dependency on strlen this early during process startup.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
In the future, this will result in a compilation failure if the
macros are unexpectedly undefined (due to header inclusion ordering
or header inclusion missing altogether).
Assembler sources are more difficult to convert. In many cases,
they are hand-optimized for the mangling and no-mangling variants,
which is why they are not converted.
sysdeps/s390/s390-32/__longjmp.c and sysdeps/s390/s390-64/__longjmp.c
are special: These are C sources, but most of the implementation is
in assembler, so the PTR_DEMANGLE macro has to be undefined in some
cases, to match the assembler style.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This allows us to define a generic no-op version of PTR_MANGLE and
PTR_DEMANGLE. In the future, we can use PTR_MANGLE and PTR_DEMANGLE
unconditionally in C sources, avoiding an unintended loss of hardening
due to missing include files or unlucky header inclusion ordering.
In i386 and x86_64, we can avoid a <tls.h> dependency in the C
code by using the computed constant from <tcb-offsets.h>. <sysdep.h>
no longer includes these definitions, so there is no cyclic dependency
anymore when computing the <tcb-offsets.h> constants.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Besides the option being gcc specific, this approach is still fragile
and not future proof since we do not know if this will be the only
optimization option gcc will add that transforms loops to memset
(or any libcall).
This patch adds a new header, dl-symbol-redir-ifunc.h, that can b
used to redirect the compiler generated libcalls to port the generic
memset implementation if required.
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Removal of legacy hwcaps support from the dynamic loader left
no users of _dl_string_hwcap.
Signed-off-by: Javier Pello <devel@otheo.eu>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Rename atomic_exchange_rel/acq to use atomic_exchange_release/acquire
since these map to the standard C11 atomic builtins.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
We should default to the larger code model, in order to support
larger applications built with -static -pie. This should be
consistent with pic-ccflag, which defaults to -fPIC.
Remove the now redundant override from sysdeps/sparc/Makefile.
Note that -fno-pie and -fno-PIE have the same effect.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Add a proper bounds check to __libc_ifunc_impl_list. This makes MAX_IFUNC
redundant and fixes several targets that will write outside the array.
To avoid unnecessary large diffs, pass the maximum in the argument 'i' to
IFUNC_IMPL_ADD - 'max' can be used in new ifunc definitions and existing
ones can be updated if desired.
Passes buildmanyglibc.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Since ad43cac44a the generic code already shuffles the argv/envp/auxv
on the stack to remove the ld.so own arguments and thus _dl_skip_args
is always 0. So there is no need to adjust the argc or argv.
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Both float, double, and _Float128 are assumed to be supported
(float and double already only uses builtins). Only long double
is parametrized due GCC bug 29253 which prevents its usage on
powerpc.
It allows to remove i686, ia64, x86_64, powerpc, and sparc arch
specific implementation.
On ia64 it also fixes the sNAN handling:
math/test-float64x-fabs
math/test-ldouble-fabs
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc-linux-gnu,
powerpc64-linux-gnu, sparc64-linux-gnu, and ia64-linux-gnu.
_dl_skip_args is always 0, so the target specific code that modifies
argv after relro protection is applied is no longer used.
After the patch relro protection is applied to _dl_argv consistently
on all targets.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
PI_STATIC_AND_HIDDEN indicates whether accesses to internal linkage
variables and hidden visibility variables in a shared object (ld.so)
need dynamic relocations (usually R_*_RELATIVE). PI (position
independent) in the macro name is a misnomer: a code sequence using GOT
is typically position-independent as well, but using dynamic relocations
does not meet the requirement.
Not defining PI_STATIC_AND_HIDDEN is legacy and we expect that all new
ports will define PI_STATIC_AND_HIDDEN. Current ports defining
PI_STATIC_AND_HIDDEN are more than the opposite. Change the configure
default.
No functional change.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
-z combreloc has been the default regadless of the architecture since
binutils commit f4d733664aabd7bd78c82895e030ec9779a92809 (2002). The
configure check added in commit fdde83499a (2001) has long been
unneeded.
We can therefore treat HAVE_Z_COMBRELOC as always 1 and delete dead code
paths in dl-machine.h files (many were copied from commit a711b01d34
and ee0cb67ec2).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
For sparc64 is the same as the generic implementation, while for
sparc32 the builtin generates the same code.
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
Prelinked binaries and libraries still work, the dynamic tags
DT_GNU_PRELINKED, DT_GNU_LIBLIST, DT_GNU_CONFLICT just ignored
(meaning the process is reallocated as default).
The loader environment variable TRACE_PRELINKING is also removed,
since it used solely on prelink.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
And use machine-sp.h instead. The Linux implementation is based on
already provided CURRENT_STACK_FRAME (used on nptl code) and
STACK_GROWS_UPWARD is replaced with _STACK_GROWS_UP.
It consolidates the code required to call la_pltexit audit
callback.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Build glibc programs and tests as PIE by default and enable static-pie
automatically if the architecture and toolchain supports it.
Also add a new configuration option --disable-default-pie to prevent
building programs as PIE.
Only the following architectures now have PIE disabled by default
because they do not work at the moment. hppa, ia64, alpha and csky
don't work because the linker is unable to handle a pcrel relocation
generated from PIE objects. The microblaze compiler is currently
failing with an ICE. GNU hurd tries to enable static-pie, which does
not work and hence fails. All these targets have default PIE disabled
at the moment and I have left it to the target maintainers to enable PIE
on their targets.
build-many-glibcs runs clean for all targets. I also tested x86_64 on
Fedora and Ubuntu, to verify that the default build as well as
--disable-default-pie work as expected with both system toolchains.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
TLS_INIT_TCB_ALIGN is not actually used. TLS_TCB_ALIGN was likely
introduced to support a configuration where the thread pointer
has not the same alignment as THREAD_SELF. Only ia64 seems to use
that, but for the stack/pointer guard, not for storing tcbhead_t.
Some ports use TLS_TCB_OFFSET and TLS_PRE_TCB_SIZE to shift
the thread pointer, potentially landing in a different residue class
modulo the alignment, but the changes should not impact that.
In general, given that TLS variables have their own alignment
requirements, having different alignment for the (unshifted) thread
pointer and struct pthread would potentially result in dynamic
offsets, leading to more complexity.
hppa had different values before: __alignof__ (tcbhead_t), which
seems to be 4, and __alignof__ (struct pthread), which was 8
(old default) and is now 32. However, it defines THREAD_SELF as:
/* Return the thread descriptor for the current thread. */
# define THREAD_SELF \
({ struct pthread *__self; \
__self = __get_cr27(); \
__self - 1; \
})
So the thread pointer points after struct pthread (hence __self - 1),
and they have to have the same alignment on hppa as well.
Similarly, on ia64, the definitions were different. We have:
# define TLS_PRE_TCB_SIZE \
(sizeof (struct pthread) \
+ (PTHREAD_STRUCT_END_PADDING < 2 * sizeof (uintptr_t) \
? ((2 * sizeof (uintptr_t) + __alignof__ (struct pthread) - 1) \
& ~(__alignof__ (struct pthread) - 1)) \
: 0))
# define THREAD_SELF \
((struct pthread *) ((char *) __thread_self - TLS_PRE_TCB_SIZE))
And TLS_PRE_TCB_SIZE is a multiple of the struct pthread alignment
(confirmed by the new _Static_assert in sysdeps/ia64/libc-tls.c).
On m68k, we have a larger gap between tcbhead_t and struct pthread.
But as far as I can tell, the port is fine with that. The definition
of TCB_OFFSET is sufficient to handle the shifted TCB scenario.
This fixes commit 23c77f6018
("nptl: Increase default TCB alignment to 32").
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
rseq support will use a 32-byte aligned field in struct pthread,
so the whole struct needs to have at least that alignment.
nptl/tst-tls3mod.c uses TCB_ALIGNMENT, therefore include <descr.h>
to obtain the fallback definition.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
No bug.
This commit adds support for __memcmpeq() as a new ABI for all
targets. In this commit __memcmpeq() is implemented only as an alias
to the corresponding targets memcmp() implementation. __memcmpeq() is
added as a new symbol starting with GLIBC_2.35 and defined in string.h
with comments explaining its behavior. Basic tests that it is callable
and works where added in string/tester.c
As discussed in the proposal "Add new ABI '__memcmpeq()' to libc"
__memcmpeq() is essentially a reserved namespace for bcmp(). The means
is shares the same specifications as memcmp() except the return value
for non-equal byte sequences is any non-zero value. This is less
strict than memcmp()'s return value specification and can be better
optimized when a boolean return is all that is needed.
__memcmpeq() is meant to only be called by compilers if they can prove
that the return value of a memcmp() call is only used for its boolean
value.
All tests in string/tester.c passed. As well build succeeds on
x86_64-linux-gnu target.
The 4af6982e4c fix does not fully handle RTLD_BOOTSTRAP usage on
rtld.c due two issues:
1. RTLD_BOOTSTRAP is also used on dl-machine.h on various
architectures and it changes the semantics of various machine
relocation functions.
2. The elf_get_dynamic_info() change was done sideways, previously
to 490e6c62aa get-dynamic-info.h was included by the first
dynamic-link.h include *without* RTLD_BOOTSTRAP being defined.
It means that the code within elf_get_dynamic_info() that uses
RTLD_BOOTSTRAP is in fact unused.
To fix 1. this patch now includes dynamic-link.h only once with
RTLD_BOOTSTRAP defined. The ELF_DYNAMIC_RELOCATE call will now have
the relocation fnctions with the expected semantics for the loader.
And to fix 2. part of 4af6982e4c is reverted (the check argument
elf_get_dynamic_info() is not required) and the RTLD_BOOTSTRAP
pieces are removed.
To reorganize the includes the static TLS definition is moved to
its own header to avoid a circular dependency (it is defined on
dynamic-link.h and dl-machine.h requires it at same time other
dynamic-link.h definition requires dl-machine.h defitions).
Also ELF_MACHINE_NO_REL, ELF_MACHINE_NO_RELA, and ELF_MACHINE_PLT_REL
are moved to its own header. Only ancient ABIs need special values
(arm, i386, and mips), so a generic one is used as default.
The powerpc Elf64_FuncDesc is also moved to its own header, since
csu code required its definition (which would require either include
elf/ folder or add a full path with elf/).
Checked on x86_64, i686, aarch64, armhf, powerpc64, powerpc32,
and powerpc64le.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
dynamic-link.h is included more than once in some elf/ files (rtld.c,
dl-conflict.c, dl-reloc.c, dl-reloc-static-pie.c) and uses GCC nested
functions. This harms readability and the nested functions usage
is the biggest obstacle prevents Clang build (Clang doesn't support GCC
nested functions).
The key idea for unnesting is to add extra parameters (struct link_map
*and struct r_scope_elm *[]) to RESOLVE_MAP,
ELF_MACHINE_BEFORE_RTLD_RELOC, ELF_DYNAMIC_RELOCATE, elf_machine_rel[a],
elf_machine_lazy_rel, and elf_machine_runtime_setup. (This is inspired
by Stan Shebs' ppc64/x86-64 implementation in the
google/grte/v5-2.27/master which uses mixed extra parameters and static
variables.)
Future simplification:
* If mips elf_machine_runtime_setup no longer needs RESOLVE_GOTSYM,
elf_machine_runtime_setup can drop the `scope` parameter.
* If TLSDESC no longer need to be in elf_machine_lazy_rel,
elf_machine_lazy_rel can drop the `scope` parameter.
Tested on aarch64, i386, x86-64, powerpc64le, powerpc64, powerpc32,
sparc64, sparcv9, s390x, s390, hppa, ia64, armhf, alpha, and mips64.
In addition, tested build-many-glibcs.py with {arc,csky,microblaze,nios2}-linux-gnu
and riscv64-linux-gnu-rv64imafdc-lp64d.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch adds the narrowing fused multiply-add functions from TS
18661-1 / TS 18661-3 / C2X to glibc's libm: ffma, ffmal, dfmal,
f32fmaf64, f32fmaf32x, f32xfmaf64 for all configurations; f32fmaf64x,
f32fmaf128, f64fmaf64x, f64fmaf128, f32xfmaf64x, f32xfmaf128,
f64xfmaf128 for configurations with _Float64x and _Float128;
__f32fmaieee128 and __f64fmaieee128 aliases in the powerpc64le case
(for calls to ffmal and dfmal when long double is IEEE binary128).
Corresponding tgmath.h macro support is also added.
The changes are mostly similar to those for the other narrowing
functions previously added, especially that for sqrt, so the
description of those generally applies to this patch as well. As with
sqrt, I reused the same test inputs in auto-libm-test-in as for
non-narrowing fma rather than adding extra or separate inputs for
narrowing fma. The tests in libm-test-narrow-fma.inc also follow
those for non-narrowing fma.
The non-narrowing fma has a known bug (bug 6801) that it does not set
errno on errors (overflow, underflow, Inf * 0, Inf - Inf). Rather
than fixing this or having narrowing fma check for errors when
non-narrowing does not (complicating the cases when narrowing fma can
otherwise be an alias for a non-narrowing function), this patch does
not attempt to check for errors from narrowing fma and set errno; the
CHECK_NARROW_FMA macro is still present, but as a placeholder that
does nothing, and this missing errno setting is considered to be
covered by the existing bug rather than needing a separate open bug.
missing-errno annotations are duly added to many of the
auto-libm-test-in test inputs for fma.
This completes adding all the new functions from TS 18661-1 to glibc,
so will be followed by corresponding stdc-predef.h changes to define
__STDC_IEC_60559_BFP__ and __STDC_IEC_60559_COMPLEX__, as the support
for TS 18661-1 will be at a similar level to that for C standard
floating-point facilities up to C11 (pragmas not implemented, but
library functions done). (There are still further changes to be done
to implement changes to the types of fromfp functions from N2548.)
Tested as followed: natively with the full glibc testsuite for x86_64
(GCC 11, 7, 6) and x86 (GCC 11); with build-many-glibcs.py with GCC
11, 7 and 6; cross testing of math/ tests for powerpc64le, powerpc32
hard float, mips64 (all three ABIs, both hard and soft float). The
different GCC versions are to cover the different cases in tgmath.h
and tgmath.h tests properly (GCC 6 has _Float* only as typedefs in
glibc headers, GCC 7 has proper _Float* support, GCC 8 adds
__builtin_tgmath).
All the ports now have THREAD_GSCOPE_IN_TCB set to 1. Remove all
support for !THREAD_GSCOPE_IN_TCB, along with the definition itself.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20210915171110.226187-4-bugaevc@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
include/math.h has a mechanism to redirect internal calls to various
libm functions, that can often be inlined by the compiler, to call
non-exported __* names for those functions in the case when the calls
aren't inlined, with the redirection being disabled when
NO_MATH_REDIRECT. Add fma to the functions to which this mechanism is
applied.
At present, libm-internal fma calls (generally to __builtin_fma*
functions) are only done when it's known the call will be inlined,
with alternative code not relying on an fma operation being used in
the caller otherwise. This patch is in preparation for adding the TS
18661 / C2X narrowing fma functions to glibc; it will be natural for
the narrowing function implementations to call the underlying fma
functions unconditionally, with this either being inlined or resulting
in an __fma* call. (Using two levels of round-to-odd computation like
that, in the case where there isn't an fma hardware instruction, isn't
optimal but is certainly a lot simpler for the initial implementation
than writing different narrowing fma implementations for all the
various pairs of formats.)
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by the patch (using
<https://sourceware.org/pipermail/libc-alpha/2021-September/130991.html>
to fix installed library stripping in build-many-glibcs.py). Also
tested for x86_64.
We stopped adding "Contributed by" or similar lines in sources in 2012
in favour of git logs and keeping the Contributors section of the
glibc manual up to date. Removing these lines makes the license
header a bit more consistent across files and also removes the
possibility of error in attribution when license blocks or files are
copied across since the contributed-by lines don't actually reflect
reality in those cases.
Move all "Contributed by" and similar lines (Written by, Test by,
etc.) into a new file CONTRIBUTED-BY to retain record of these
contributions. These contributors are also mentioned in
manual/contrib.texi, so we just maintain this additional record as a
courtesy to the earlier developers.
The following scripts were used to filter a list of files to edit in
place and to clean up the CONTRIBUTED-BY file respectively. These
were not added to the glibc sources because they're not expected to be
of any use in future given that this is a one time task:
https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dchttps://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
They provide TLS_GD/TLS_LD/TLS_IE/TLS_IE macros for TLS testing. Now
that we have migrated to __thread and tls_model attributes, these macros
are unused and the tls-macros.h files can retire.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Only the placeholder compatibility symbols are left now.
The __errno_location symbol was removed (moved) using
scripts/move-symbol-to-libc.py.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
