Previously, we allocated room in the result space before the check,
leaving uninitialized data there in case the check failed.
This also consolidates the behavior between single (A or AAAA) and
dual (A and AAAA in parallel) queries. Single queries checked
the record length against the QTYPE, not the RRTYPE.
The conformtest expectations for signal.h have various declarations
that are expected for POSIX (1996) and all later standards, except,
wrongly, for XOPEN2K. This shows up as failures of tests for two
other headers, which are allowed to make visible symbols from
signal.h, because of an incorrect namespace failure for sigval
(required in signal.h in XOPEN2K, so should be allowed for those other
headers); signal.h tests for various standards fail anyway because of
other problems in the header. This patch fixes the incorrect
expectations and removes the two XFAILs that this fixes.
Tested for x86_64 and x86.
* conform/data/signal.h-data (union sigval): Expect also if
[XOPEN2K].
(struct sigevent): Likewise.
(SIGEV_NONE): Likewise.
(SIGEV_SIGNAL): Likewise.
(SIGEV_THREAD): Likewise.
(SIGRTMIN): Likewise.
(SIGRTMAX): Likewise.
* conform/Makefile (test-xfail-XOPEN2K/aio.h/conform): Remove
variable.
(test-xfail-XOPEN2K/mqueue.h/conform): Likewise.
In various error scenarios (for example, if the server closes the
TCP connection before sending the full response), send_vc can return
without resetting the *resplen2 value. This can pass uninitialized
or unexpected data to the caller.
this patch adds the missing SOL_IUCV socket level definition
and socket options SO_IPRMDATA_MSG, SO_MSGLIMIT, SO_MSGSIZE
which can be used with get/setsockopt().
SCM_IUCV_TRGCLS is needed to send/receive ancillary data with send/recvmsg().
The defines are copied from kernel-source:
include/net/iucv/af_iucv.h
include/linux/socket.h
Current GLIBC fmemopen fails with a simple testcase:
char buffer[500] = "x";
FILE *stream;
stream = fmemopen(buffer, 500, "r+");
fwrite("fish",sizeof(char),5,stream);
printf("pos-1:%ld\n",ftell(stream));
fflush(stream);
printf("pos-2:%ld\n",ftell(stream));
It returns:
pos-1:5
pos-2:0
Where it should return:
pos-1:5
pos-2:5
This is due the internal write function does not correctly update the internal
object position state and then the seek operation returns a wrong value. This
patch fixes it.
It fixes both BZ #20005 and BZ #19230 (marked as duplicated). A new test is
added to check for such case.
Tested on x86_64 and i686.
* libio/fmemopen.c (fmemopen_write): Update internal position after
write.
* stdio-common/Makefile (tests): Add tst-fmemopen4.c.
* stdio-common/tst-fmemopen4.c: New file..
langinfo.h declares nl_langinfo_l if __USE_XOPEN2K. But this function
was new in the 2008 edition of POSIX. This patch fixes the condition
accordingly.
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).
[BZ #19996]
* locale/langinfo.h (nl_langinfo_l): Declare if [__USE_XOPEN2K8],
not [__USE_XOPEN2K].
* conform/Makefile (test-xfail-XOPEN2K/langinfo.h/conform): Remove
variable.
The conform/ test expectations for stdarg.h were wrongly missing an
expectation of va_copy for XOPEN2K (based on C99, so including that
macro). This patch fixes this.
Tested for x86_64 and x86.
* conform/data/stdarg.h-data [XOPEN2K] (va_copy): Require macro.
* conform/Makefile (test-xfail-XOPEN2K/stdarg.h/conform): Remove
variable.
The header conformance test for stdio.h for XOPEN2K fails because the
header does not define the off_t type, used in the expected
declarations for fseeko and ftello.
The absence of this type is not actually strictly a bug (hence no bug
report being filed in Bugzilla), since POSIX didn't require the type
to be declared in this header until the 2008 edition. However, the
glibc convention in such cases - where the type falls under the
general *_t POSIX reservation, and so it's OK to define it for all
POSIX versions - is to make the headers self-contained in this regard
even for the older POSIX versions not requiring the type to be defined
despite including other declarations depending on the type. Thus,
this patch adjusts the condition in the header and removes the XFAIL
(rather than adapting the expectation to work when the functions are
declared using __off_t without off_t being defined).
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* libio/stdio.h (off_t): Define if [__USE_XOPEN2K], not
[__USE_XOPEN2K8].
[__USE_LARGEFILE64] (off64_t): Likewise.
* conform/Makefile (test-xfail-XOPEN2K/stdio.h/conform): Remove
variable.
stdio.h declares cuserid if __USE_XOPEN. But this was removed in the
2001 edition of POSIX.
The #endif comment "Use X/Open, but not issue 6." reflects the correct
logic, but does not correspond to the #ifdef. The use of a correct
libc-hacker. The online archives for libc-hacker in August 2000 are
broken, but the messages can be found in the qmail archives in
/sourceware1/qmail/lists-sourceware/libc-hacker/archive/26 if you have
shell access to sourceware.
The issue showed up in August 2000 because of a warning about a
non-prototype definition in sysdeps/posix/cuserid.c when there was no
previous prototype declaration. Since we've now eliminated
non-prototype function definitions, that issue does not apply. The
other points from that discussion were about whether it should be
included in _GNU_SOURCE; whether _GNU_SOURCE should include
"everything"; whether deprecated interfaces such as this should be
excluded from it; and whether, even given exclusion of deprecated
interfaces, it should apply for deprecations in a version of POSIX
that at that time had not been released.
This patch follows the more conservative approach to a fix of keeping
the interface in _GNU_SOURCE. That matches how L_cuserid is handled.
I think there is a strong case for eliminating this interface from
_GNU_SOURCE (but this may not automatically be the case for every
interface removed in newer POSIX versions), but then L_cuserid should
also be removed from _GNU_SOURCE (in stdio-common/stdio_lim.h.in) at
the same time.
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).
[BZ #19989]
* libio/stdio.h (cuserid): Do not declare if
[__USE_XOPEN2K && !__USE_GNU].
* conform/Makefile (test-xfail-XOPEN2K8/stdio.h/conform): Remove
variable.
RFC2292 macros were obsoleted by RFC3542, and should not be exposed
any more. Notably since IPV6_PKTINFO has been reintroduced with a
completely different API.
* bits/in.h (IPV6_PKTINFO): Rename to IPV6_2292PKTINFO.
(IPV6_HOPOPTS): Rename to IPV6_2292HOPOPTS.
(IPV6_DSTOPTS): Rename to IPV6_2292DSTOPTS.
(IPV6_RTHDR): Rename to IPV6_2292RTHDR.
(IPV6_PKTOPTIONS): Rename to IPV6_2292PKTOPTIONS.
(IPV6_HOPLIMIT): Rename to IPV6_2292HOPLIMIT.
(IPV6_RECVPKTINFO): New macro.
(IPV6_PKTINFO): New macro.
__libc_memalign in ld.so allocates one page at a time and tries to
optimize consecutive __libc_memalign calls by hoping that the next
mmap is after the current memory allocation.
However, the kernel hands out mmap addresses in top-down order, so
this optimization in practice never happens, with the result that we
have more mmap calls and waste a bunch of space for each __libc_memalign.
This change makes __libc_memalign to mmap one page extra. Worst case,
the kernel never puts a backing page behind it, but best case it allows
__libc_memalign to operate much much better. For elf/tst-align --direct,
it reduces number of mmap calls from 12 to 9.
* elf/dl-minimal.c (__libc_memalign): Mmap one extra page.
The ISO 14652/30112 specs say the defaults for the week keyword are:
7, 19971130, 7
The localedef has been using those defaults for the first two, but
0 for the last one.
This patch optimizes strcasestr function for power >= 8 systems. The average
improvement of this optimization is ~40% and compares 16 bytes at a time
using vector instructions. This patch is tested on powerpc64 and powerpc64le.
This patch adds full support for cross-building benchmarks. Some
benchmarks like those that need locales to be generated cannot be
built and are hence skipped for cross builds.
Tested by cross building for aarch64 on x86_64 and then running the
generated benchmark on aarch64.
* benchtests/Makefile (wcsmbs-benchset): Include only for
native builds and runs.
(LOCALES): Likewise.
(bench-build): Build timing-type here instead of the bench
target. Generate locale only for native builds.
* benchtests/README: Add note for cross-building.
For situations where we are cross-building or where we want to avoid
building on the target system, we want a way to only build benchmarks
and then copy them over to the target system to run them. I have also
added a simple enhancement for the 'bench' target where all benchmark
binaries are built and then the benchmarks executed.
Tested on arm.
Makefile.in (bench-build): New target.
Rules (PHONY): Add bench-build target.
benchtests/Makefile (bench): Depend on bench-build.
(bench-build): New target.
The newer version of the standard adds %C %e %t to tel_int_fmt and
tel_dom_fmt. Make sure localedef accepts them.
Also change the default tel_int_fmt to include %t per the standard.
This updates a few locales based on CLDR v29 data. I've verified most by
hand while the rest I know are correct.
For int_curr_symbol, it should be 3 characters followed by a space:
ar_SS: changing SDG to SSP
bem_ZM: changing ZMK to ZMW
dz_BT: changing BTN to BTN # Just changing " " to "<U0020>".
en_ZW: changing ZWD to USD
es_SV: changing SVC to USD
lv_LV: changing LVL to EUR
ne_NP: changing INR to NPR
pap_AW: changing ANG to AWG
the_NP: changing INR to NPR
Some of these require updates iso-4217.def.
For currency_symbol, it should be the standard/localized symbol name:
aa_DJ: changing $ to Fdj
ar_SA: changing ريال to ر.س
ar_SS: changing ج.س. to £
az_AZ: changing man. to ₼
bg_BG: changing лв to лв.
ce_RU: changing руб to ₽
crh_UA: changing gr to ₴
cv_RU: changing t to ₽
de_CH: changing Fr. to CHF
dz_BT: changing དངུལ་ཀྲམ་ to Nu.
en_BW: changing Pu to P
en_DK: changing ¤ to kr.
en_PH: changing Php to ₱
en_ZW: changing Z$ to $
es_BO: changing $b to Bs
es_DO: changing $ to RD$
es_HN: changing L. to L
es_PA: changing B/ to B/.
es_SV: changing ₡ to $
fil_PH: changing PhP to ₱
he_IL: changing שח to ₪
hy_AM: changing Դ to ֏
ka_GE: changing ლ to ₾
kk_KZ: changing тг to ₸
ko_KR: changing ￦ to ₩
lg_UG: changing /- to USh
lv_LV: changing Ls to €
mg_MG: changing AR to Ar
mhr_RU: changing ТЕҤ to ₽
my_MM: changing Ks to K
os_RU: changing сом to ₽
pap_AW: changing f to ƒ
pap_CW: changing f to ƒ
ps_AF: changing افغانۍ to ؋
rw_RW: changing Frw to FRw
ru_RU: changing руб to ₽
ru_UA: changing гр to ₴
sd_IN@devanagari: changing रु to ₹
se_NO: changing ru to kr
si_LK: changing ₨ to රු
so_SO: changing $ to S
sq_AL: changing Lek to L
ti_ER: changing $ to Nfk
ti_ET: changing $ to Br
tl_PH: changing PhP to ₱
tr_TR: changing TL to ₺
tt_RU: changing руб to ₽
tt_RU@iqtelif: changing sum to ₽
uz_UZ: changing so'm to soʻm
Note: Some of the characters might not render as they're still quite new
in the Unicode database.
Updated from the model numbers of Goldmont and Airmont processors in
Intel64 And IA-32 Processor Architectures Software Developer's Manual
Volume 3 Revision 058.
* sysdeps/x86/cpu-features.c (init_cpu_features): Detect Intel
Goldmont and Airmont processors.
This patch fixes the __ALIGNMENT_{ARG,COUNT} definition for ports that
define __ASSUME_ALIGNED_REGISTER_PAIRS by including the kernel-features.h
(where it is defined if the case).
This was shown on arm with failing cases:
FAIL: debug/tst-chk1
FAIL: debug/tst-chk2
FAIL: debug/tst-chk3
FAIL: debug/tst-chk4
FAIL: debug/tst-chk5
FAIL: debug/tst-chk6
FAIL: debug/tst-lfschk1
FAIL: debug/tst-lfschk2
FAIL: debug/tst-lfschk3
FAIL: debug/tst-lfschk4
FAIL: debug/tst-lfschk5
FAIL: debug/tst-lfschk6
FAIL: posix/tst-preadwrite
FAIL: posix/tst-preadwrite64
The patches fixes it. Tested on armhf.
* sysdeps/unix/sysv/linux/sysdep.h: Include kernel-features.h.
The commit 985fc132f2
"strfmon_l: Use specified locale for number formatting [BZ #19633]"
introduced an elf/check-abi-libc testfailure due to __printf_fp_l
on architectures which use sysdeps/ieee754/ldbl-opt/math_ldbl_opt.h.
This patch uses libc_hidden_def instead of ldbl_hidden_def.
The ldbl_strong_alias is removed due to the rename of ___printf_fp_l
to __printf_fp_l.
ChangeLog:
* stdio-common/printf_fp.c (__printf_fp_l):
Rename ___printf_fp_l to __printf_fp_l and
remove strong alias. Use libc_hidden_def instead
of ldbl_hidden_def macro.
The fork handler now runs so late that there is no risk anymore that
other fork handlers in the same thread use malloc, so it is no
longer necessary to install malloc hooks which made a subset
of malloc functionality available to the thread that called fork.
Previously, a thread M invoking fork would acquire locks in this order:
(M1) malloc arena locks (in the registered fork handler)
(M2) libio list lock
A thread F invoking flush (NULL) would acquire locks in this order:
(F1) libio list lock
(F2) individual _IO_FILE locks
A thread G running getdelim would use this order:
(G1) _IO_FILE lock
(G2) malloc arena lock
After executing (M1), (F1), (G1), none of the threads can make progress.
This commit changes the fork lock order to:
(M'1) libio list lock
(M'2) malloc arena locks
It explicitly encodes the lock order in the implementations of fork,
and does not rely on the registration order, thus avoiding the deadlock.
The overloading approach in the W* macros was incompatible with
integer expressions of a type different from int. Applications
using union wait and these macros will have to migrate to the
POSIX-specified int status type.
The large memcpy micro benchmark in glibc shows that there is a
regression with large data on Haswell machine. non-temporal store in
memcpy on large data can improve performance significantly. This
patch adds a threshold to use non temporal store which is 6 times of
shared cache size. When size is above the threshold, non temporal
store will be used, but avoid non-temporal store if there is overlap
between destination and source since destination may be in cache when
source is loaded.
For size below 8 vector register width, we load all data into registers
and store them together. Only forward and backward loops, which move 4
vector registers at a time, are used to support overlapping addresses.
For forward loop, we load the last 4 vector register width of data and
the first vector register width of data into vector registers before the
loop and store them after the loop. For backward loop, we load the first
4 vector register width of data and the last vector register width of
data into vector registers before the loop and store them after the loop.
[BZ #19928]
* sysdeps/x86_64/cacheinfo.c (__x86_shared_non_temporal_threshold):
New.
(init_cacheinfo): Set __x86_shared_non_temporal_threshold to 6
times of shared cache size.
* sysdeps/x86_64/multiarch/memmove-avx-unaligned-erms.S
(VMOVNT): New.
* sysdeps/x86_64/multiarch/memmove-avx512-unaligned-erms.S
(VMOVNT): Likewise.
* sysdeps/x86_64/multiarch/memmove-sse2-unaligned-erms.S
(VMOVNT): Likewise.
(VMOVU): Changed to movups for smaller code sizes.
(VMOVA): Changed to movaps for smaller code sizes.
* sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S: Update
comments.
(PREFETCH): New.
(PREFETCH_SIZE): Likewise.
(PREFETCHED_LOAD_SIZE): Likewise.
(PREFETCH_ONE_SET): Likewise.
Rewrite to use forward and backward loops, which move 4 vector
registers at a time, to support overlapping addresses and use
non temporal store if size is above the threshold and there is
no overlap between destination and source.
This patch adds support for using the implementations of gettimeofday()
and clock_gettime() provided by the kernel in the VDSO. The VDSO will
always provide clock_gettime() as CLOCK_{REALTIME,MONOTONIC}_COARSE can
be implemented regardless of platform. CLOCK_{REALTIME,MONOTONIC}, along
with gettimeofday(), are only implemented on platforms which make use of
either the CP0 count or GIC as their clocksource. On other platforms,
the VDSO does not provide the __vdso_gettimeofday symbol, as it is
never useful.
The VDSO functions return ENOSYS when they encounter an unsupported
request, in which case glibc should fall back to the standard syscall.
Tested with upstream kernel 4.5 and QEMU emulating Malta.
./vdsotest gettimeofday bench
gettimeofday: syscall: 1021 nsec/call
gettimeofday: libc: 262 nsec/call
gettimeofday: vdso: 174 nsec/call
* sysdeps/unix/sysv/linux/mips/Makefile (sysdep_routines):
Include dl-vdso.
* sysdeps/unix/sysv/linux/mips/Versions: Add
__vdso_clock_gettime.
* sysdeps/unix/sysv/linux/mips/init-first.c: New file.
* sysdeps/unix/sysv/linux/mips/libc-vdso.h: New file.
* sysdeps/unix/sysv/linux/mips/mips32/sysdep.h:
(INTERNAL_VSYSCALL_CALL): Define to be compatible with MIPS
definitions of INTERNAL_SYSCALL_{ERROR_P,ERRNO}.
(HAVE_CLOCK_GETTIME_VSYSCALL): Define.
(HAVE_GETTIMEOFDAY_VSYSCALL): Define.
* sysdeps/unix/sysv/linux/mips/mips64/n32/sysdep.h: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/sysdep.h: Likewise.
This patch consolidates all the pwrite/pwrite64 implementation for Linux
in only one (sysdeps/unix/sysv/linux/pwrite{64}.c). It also removes the
syscall from the auto-generation using assembly macros.
For pwrite{64} offset argument placement the new SYSCALL_LL{64} macro
is used. For pwrite ports that do not define __NR_pwrite will use
__NR_pwrite64 and for pwrite64 ports that dot define __NR_pwrite64 will
use __NR_pwrite for the syscall.
Checked on x86_64, x32, i386, aarch64, and ppc64le.
* sysdeps/unix/sysv/linux/arm/pwrite.c: Remove file.
* sysdeps/unix/sysv/linux/arm/pwrite64.c: Likewise.
* sysdeps/unix/sysv/linux/generic/wordsize-32/pwrite.c: Likewise.
* sysdeps/unix/sysv/linux/generic/wordsize-32/pwrite64.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/pwrite.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/pwrite64.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/pwrite64.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/syscalls.list (prite): Remove
syscalls generation.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/sysdep.h
[__NR_pwrite64] (__NR_write): Remove define.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/sysdep.h
[__NR_pwrite64] (__NR_write): Remove define.
* sysdeps/unix/sysv/linux/pwrite.c [__NR_pwrite64] (__NR_pwrite):
Remove define.
(__libc_pwrite): Use SYSCALL_LL macro on offset argument.
* sysdeps/unix/sysv/linux/pwrite64.c [__NR_pwrite64] (__NR_pwrite):
Remove define.
(__libc_pwrite64): Use SYSCALL_LL64 macro on offset argument.
* sysdeps/unix/sysv/linux/sh/pwrite.c: Rewrite using default
Linux implementation as base.
* sysdeps/unix/sysv/linux/sh/pwrite64.c: Likewise.
* sysdeps/unix/sysv/linux/mips/pwrite.c: Likewise.
* sysdeps/unix/sysv/linux/mips/pwrite64.c: Likewise.
This patch consolidates all the pread/pread64 implementation for Linux
in only one (sysdeps/unix/sysv/linux/pread.c). It also removes the
syscall from the auto-generation using assembly macros.
For pread{64} offset argument placement the new SYSCALL_LL{64} macro
is used. For pread ports that do not define __NR_pread will use
__NR_pread64 and for pread64 ports that dot define __NR_pread64 will
use __NR_pread for the syscall.
Checked on x86_64, x32, i386, aarch64, and ppc64le.
* sysdeps/unix/sysv/linux/arm/pread.c: Remove file.
* sysdeps/unix/sysv/linux/arm/pread64.c: Likewise.
* sysdeps/unix/sysv/linux/generic/wordsize-32/pread.c: Likewise.
* sysdeps/unix/sysv/linux/generic/wordsize-32/pread64.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/pread.c: Likewise,
* sysdeps/unix/sysv/linux/powerpc/powerpc32/pread64.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/pread64.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/syscalls.list (pread): Remove
syscall generation.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/sysdep.h
[__NR_pread64] (__NR_pread): Remove define.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/sysdep.h:
[__NR_pread64] (__NR_pread): Likewise.
* sysdeps/unix/sysv/linux/pread.c [__NR_pread64] (__NR_pread): Remove
define.
(__libc_pread): Use SYSCALL_LL macro on offset argument.
* sysdeps/unix/sysv/linux/pread64.c [__NR_pread64] (__NR_pread):
Remove define.
(__libc_pread64): Use SYSCALL_LL64 macro on offset argument.
* sysdeps/unix/sysv/linux/sh/pread.c: Rewrite using default
Linux implementation as base.
* sysdeps/unix/sysv/linux/sh/pread64.c: Likewise.
* sysdeps/unix/sysv/linux/mips/pread.c: Likewise.
* sysdeps/unix/sysv/linux/mips/pread64.c: Likewise.
