This is an internal function meant to return the number of avaliable
processor where the process can scheduled, different than the
__get_nprocs which returns a the system available online CPU.
The Linux implementation currently only calls __get_nprocs(), which
in tuns calls sched_getaffinity.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
(cherry picked from commit 11a02b035b)
The choice between the kill vs tgkill system calls is not just about
the TID reuse race, but also about whether the signal is sent to the
whole process (and any thread in it) or to a specific thread.
This was caught by the openposix test suite:
LTP: openposix test suite - FAIL: SIGUSR1 is member of new thread pendingset.
<https://gitlab.com/cki-project/kernel-tests/-/issues/764>
Fixes commit 526c3cf11e ("nptl: Fix race
between pthread_kill and thread exit (bug 12889)").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit eae81d7057)
Some kernel versions (observed with kernel 5.14 and earlier) can list
"0" entries in /proc/self/task. This happens when a thread exits
while the task list is being constructed. Treat this entry as not
present, like the proposed kernel patch does:
[PATCH] procfs: Do not list TID 0 in /proc/<pid>/task
<https://lore.kernel.org/all/8735pn5dx7.fsf@oldenburg.str.redhat.com/>
Fixes commit 032d74eaf6 ("support: Add
support_wait_for_thread_exit").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 176c88f521)
As part of the fix for bug 12889, signals are blocked during
thread exit, so that application code cannot run on the thread that
is about to exit. This would cause problems if the application
expected signals to be delivered after the signal handler revealed
the thread to still exist, despite pthread_kill can no longer be used
to send signals to it. However, glibc internally uses the SIGSETXID
signal in a way that is incompatible with signal blocking, due to the
way the setxid handshake delays thread exit until the setxid operation
has completed. With a blocked SIGSETXID, the handshake can never
complete, causing a deadlock.
As a band-aid, restore the previous handshake protocol by not blocking
SIGSETXID during thread exit.
The new test sysdeps/pthread/tst-pthread-setuid-loop.c is based on
a downstream test by Martin Osvald.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 2849e2f533)
It ensures a continuous range of file descriptor and avoid hitting
the RLIMIT_NOFILE.
Checked on x86_64-linux-gnu.
(cherry picked from commit 6b20880b22)
It returns a range of file descriptor referring to the '/dev/null'
pathname. The function takes care of restarting the open range
if a file descriptor is found within the specified range and
also increases RLIMIT_NOFILE if required.
Checked on x86_64-linux-gnu.
(cherry picked from commit e814f4b04e)
The fix for bug 19193 breaks some old applications which appear
to use pthread_kill to probe if a thread is still running, something
that is not supported by POSIX.
(cherry picked from commit 95dba35bf0)
There is a GNU extension that allows to call getcwd(NULL, >0). It is
described in the documentation, but also directly in the unistd.h
header, just above the declaration.
Therefore the attribute access mode added in commit 06febd8c67
is not correct. Drop it.
Linux 5.14 adds constants MADV_POPULATE_READ and MADV_POPULATE_WRITE
(with the same values on all architectures). Add these to glibc's
bits/mman-linux.h.
Tested for x86_64.
(cherry picked from commit 3561106278)
This patch updates the kernel version in the test tst-mman-consts.py
to 5.14. (There are no new MAP_* constants covered by this test in
5.14 that need any other header changes.)
Tested with build-many-glibcs.py.
(cherry picked from commit 4b39e34983)
Linux 5.14 has two new syscalls, memfd_secret (on some architectures
only) and quotactl_fd. Update syscall-names.list and regenerate the
arch-syscall.h headers with build-many-glibcs.py update-syscalls.
Tested with build-many-glibcs.py.
(cherry picked from commit 89dc0372a9)
This patch makes build-many-glibcs.py use Linux 5.14.
Tested with build-many-glibcs.py (host-libraries, compilers and glibcs
builds).
(cherry picked from commit 4e04a47208)
When a local resolver like unbound is listening on the IPv4 loopback
address 127.0.0.1, the nss/tst-nss-files-hosts-long test fails. This is
due to:
- the default resolver in the absence of resolv.conf being 127.0.0.1
- the default DNS NSS database configuration in the absence of
nsswitch.conf being 'hosts: dns [!UNAVAIL=return] file'
This causes the requests for 'test4' and 'test6' to first be sent to the
local resolver, which responds with NXDOMAIN in the likely case those
records do no exist. In turn that causes the access to /etc/hosts to be
skipped, which is the purpose of that test.
Fix that by providing a simple nsswitch.conf file forcing access to
/etc/hosts for that test. I have tested that the only changed result in
the testsuite is that test.
(cherry picked from commit 2738480a4b)
The consolidation of configuration parsing broke behaviour with
--prefix, where the prefix bled into the modules cache. Accept a
prefix which, when non-NULL, is prepended to the path when looking for
configuration files but only the original directory is added to the
modules cache.
This has no effect on the codegen of gconv_conf since it passes NULL.
Reported-by: Patrick McCarty <patrick.mccarty@intel.com>
Reported-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
Reviewed-by: Andreas Schwab <schwab@linux-m68k.org>
(cherry picked from commit 43cea6d565)
A new thread exit lock and flag are introduced. They are used to
detect that the thread is about to exit or has exited in
__pthread_kill_internal, and the signal is not sent in this case.
The test sysdeps/pthread/tst-pthread_cancel-select-loop.c is derived
from a downstream test originally written by Marek Polacek.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 526c3cf11e)
This closes one remaining race condition related to bug 12889: if
the thread already exited on the kernel side, returning ESRCH
is not correct because that error is reserved for the thread IDs
(pthread_t values) whose lifetime has ended. In case of a
kernel-side exit and a valid thread ID, no signal needs to be sent
and cancellation does not have an effect, so just return 0.
sysdeps/pthread/tst-kill4.c triggers undefined behavior and is
removed with this commit.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 8af8456004)
{f,l,}xstat stub for MIPS is using INTERNAL_SYSCALL
to do xstat syscall for glibc ver, However it leaves
errno untouched and thus giving bad errno output.
Setup errno properly when syscall returns non-zero.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 66016ec8ae)
Use testl, instead of andl, to check __x86_string_control to avoid
updating __x86_string_control.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 3c8b9879ca)
This test implements following logic:
1) Create POSIX message queue.
Register a notification with mq_notify (using NULL attributes).
Then immediately unregister the notification with mq_notify.
Helper thread in a vulnerable version of glibc
should cause NULL pointer dereference after these steps.
2) Once again, register the same notification.
Try to send a dummy message.
Test is considered successfulif the dummy message
is successfully received by the callback function.
Signed-off-by: Nikita Popov <npv1310@gmail.com>
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
(cherry picked from commit 4cc79c2177)
Helper thread frees copied attribute on NOTIFY_REMOVED message
received from the OS kernel. Unfortunately, it fails to check whether
copied attribute actually exists (data.attr != NULL). This worked
earlier because free() checks passed pointer before actually
attempting to release corresponding memory. But
__pthread_attr_destroy assumes pointer is not NULL.
So passing NULL pointer to __pthread_attr_destroy will result in
segmentation fault. This scenario is possible if
notification->sigev_notify_attributes == NULL (which means default
thread attributes should be used).
Signed-off-by: Nikita Popov <npv1310@gmail.com>
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
(cherry picked from commit b805aebd42)
__REDIRECT and __THROW are not compatible with C++ due to the ordering of the
__asm__ alias and the throw specifier. __REDIRECT_NTH has to be used
instead.
Fixes commit 8a40aff86b ("io: Add time64 alias
for fcntl"), commit 82c395d91e ("misc: Add
time64 alias for ioctl"), commit b39ffab860
("Linux: Add time64 alias for prctl").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit c87fcacc50)
If close() on infd and outfd succeeded, reset the fd numbers so that
we don't attempt to close them again.
Reviewed-by: Arjun Shankar <arjun@redhat.com>
(cherry picked from commit 45caed9d67)
labellist and precedencelist could get freed a second time if there
are allocation failures, so set them to NULL to avoid a double-free.
Reviewed-by: Arjun Shankar <arjun@redhat.com>
(cherry picked from commit 77a34079d8)
The allocated `conf` would leak if we have to skip over the file due
to the underlying filesystem not supporting dt_type.
Reviewed-by: Arjun Shankar <arjun@redhat.com>
(cherry picked from commit 5f9b78fe35)
Commit 03e187a41d added a regression when an audit module does not have
libc as DT_NEEDED (although unusual it is possible).
Checked on x86_64-linux-gnu.
commit 3ec5d83d2a
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Sat Jan 25 14:19:40 2020 -0800
x86-64: Avoid rep movsb with short distance [BZ #27130]
introduced some regressions on Intel processors without Fast Short REP
MOV (FSRM). Add Avoid_Short_Distance_REP_MOVSB to avoid rep movsb with
short distance only on Intel processors with FSRM. bench-memmove-large
on Skylake server shows that cycles of __memmove_evex_unaligned_erms
improves for the following data size:
before after Improvement
length=4127, align1=3, align2=0: 479.38 349.25 27%
length=4223, align1=9, align2=5: 405.62 333.25 18%
length=8223, align1=3, align2=0: 786.12 496.38 37%
length=8319, align1=9, align2=5: 727.50 501.38 31%
length=16415, align1=3, align2=0: 1436.88 840.00 41%
length=16511, align1=9, align2=5: 1375.50 836.38 39%
length=32799, align1=3, align2=0: 2890.00 1860.12 36%
length=32895, align1=9, align2=5: 2891.38 1931.88 33%
The benchmark and tests must fail in case of allocation failure in the
implementation array. Also annotate the x* allocators in support.h so
that the compiler has more information about them.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Tell the compiler that xmalloc family of allocators always return
non-NULL. xrealloc in locale/programs also always returns non-NULL,
but that conflicts with default realloc behaviour and that of xrealloc
in libsupport, so keep it as is for now and resolve the differences
later.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
All references to libraries in the manual are without the .so prefix,
so do the same for libc_malloc_debug.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
mcheck and malloc-check no longer work with static binaries, so drop
those tests.
Reported-by: Samuel Thibault <samuel.thibault@gnu.org>
Tested-by: Samuel Thibault <samuel.thibault@gnu.org>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
These functions call the core allocator functions (realloc and malloc
respectively) and are hence guaranteed to allocate memory using the
correct functions when multiple allocators are interposed. Having
these functions interposed in one allocator and not another may result
in confusion, hence discourage interposing them altogether.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
1. Install <bits/platform/x86.h> for <sys/platform/x86.h> which includes
<bits/platform/x86.h>.
2. Rename HAS_CPU_FEATURE to CPU_FEATURE_PRESENT which checks if the
processor has the feature.
3. Rename CPU_FEATURE_USABLE to CPU_FEATURE_ACTIVE which checks if the
feature is active. There may be other preconditions, like sufficient
stack space or further setup for AMX, which must be satisfied before the
feature can be used.
This fixes BZ #27958.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
