This patch is using the corresponding GCC builtin for llrintf, llrint,
llrintl and llrintf128 if the USE_FUNCTION_BUILTIN macros are defined to one
in math-use-builtins-function.h.
Co-Authored-By: Xi Ruoyao <xry111@xry111.site>
This patch is using the corresponding GCC builtin for lrintf, lrint,
lrintl and lrintf128 if the USE_FUNCTION_BUILTIN macros are defined to one
in math-use-builtins-function.h.
Co-Authored-By: Xi Ruoyao <xry111@xry111.site>
This makes it more likely that the compiler can compute the strlen
argument in _startup_fatal at compile time, which is required to
avoid a dependency on strlen this early during process startup.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
The old exception handling implementation used function interposition
to replace the dynamic loader implementation (no TLS support) with the
libc implementation (TLS support). This results in problems if the
link order between the dynamic loader and libc is reversed (bug 25486).
The new implementation moves the entire implementation of the
exception handling functions back into the dynamic loader, using
THREAD_GETMEM and THREAD_SETMEM for thread-local data support.
These depends on Hurd support for these macros, added in commit
b65a82e4e7 ("hurd: Add THREAD_GET/SETMEM/_NC").
One small obstacle is that the exception handling facilities are used
before the TCB has been set up, so a check is needed if the TCB is
available. If not, a regular global variable is used to store the
exception handling information.
Also rename dl-error.c to dl-catch.c, to avoid confusion with the
dlerror function.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
According to the specification of ISO/IEC TS 18661-1:2014,
The strfromd, strfromf, and strfroml functions are equivalent to
snprintf(s, n, format, fp) (7.21.6.5), except the format string contains only
the character %, an optional precision that does not contain an asterisk *, and
one of the conversion specifiers a, A, e, E, f, F, g, or G, which applies to
the type (double, float, or long double) indicated by the function suffix
(rather than by a length modifier). Use of these functions with any other 20
format string results in undefined behavior.
strfromf will convert the arguement with type float to double first.
According to the latest version of IEEE754 which is published in 2019,
Conversion of a quiet NaN from a narrower format to a wider format in the same
radix, and then back to the same narrower format, should not change the quiet
NaN payload in any way except to make it canonical.
When either an input or result is a NaN, this standard does not interpret the
sign of a NaN. However, operations on bit strings—copy, negate, abs,
copySign—specify the sign bit of a NaN result, sometimes based upon the sign
bit of a NaN operand. The logical predicates totalOrder and isSignMinus are
also affected by the sign bit of a NaN operand. For all other operations, this
standard does not specify the sign bit of a NaN result, even when there is only
one input NaN, or when the NaN is produced from an invalid operation.
converting NAN or -NAN with type float to double doesn't need to keep
the signbit. As a result, this test case isn't mandatory.
The problem is that according to RISC-V ISA manual in chapter 11.3 of
riscv-isa-20191213,
Except when otherwise stated, if the result of a floating-point operation is
NaN, it is the canonical NaN. The canonical NaN has a positive sign and all
significand bits clear except the MSB, a.k.a. the quiet bit. For
single-precision floating-point, this corresponds to the pattern 0x7fc00000.
which means that conversion -NAN from float to double won't keep the signbit.
Since glibc ought to be consistent here between types and architectures, this
patch adds copysign to fix this problem if the string is NAN. This patch
adds two different functions under sysdeps directory to work around the
issue.
This patch has been tested on x86_64 and riscv64.
Resolves: BZ #29501
v2: Change from macros to different inline functions.
v3: Add unlikely check to isnan.
v4: Fix wrong commit message header.
v5: Fix style: add space before parentheses.
v6: Add copyright.
Signed-off-by: Letu Ren <fantasquex@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This consolidates the destructor invocations from _dl_fini and
dlclose. Remove the micro-optimization that avoids
calling _dl_call_fini if they are no destructors (as dlclose is quite
expensive anyway). The debug log message is now printed
unconditionally.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This allows the rest of dynamic loader to check whether the TCB
has been set up (and THREAD_GETMEM and THREAD_SETMEM will work).
Reviewed-by: Siddhesh Poyarekar <siddhesh@gotplt.org>
In the future, this will result in a compilation failure if the
macros are unexpectedly undefined (due to header inclusion ordering
or header inclusion missing altogether).
Assembler sources are more difficult to convert. In many cases,
they are hand-optimized for the mangling and no-mangling variants,
which is why they are not converted.
sysdeps/s390/s390-32/__longjmp.c and sysdeps/s390/s390-64/__longjmp.c
are special: These are C sources, but most of the implementation is
in assembler, so the PTR_DEMANGLE macro has to be undefined in some
cases, to match the assembler style.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This allows us to define a generic no-op version of PTR_MANGLE and
PTR_DEMANGLE. In the future, we can use PTR_MANGLE and PTR_DEMANGLE
unconditionally in C sources, avoiding an unintended loss of hardening
due to missing include files or unlucky header inclusion ordering.
In i386 and x86_64, we can avoid a <tls.h> dependency in the C
code by using the computed constant from <tcb-offsets.h>. <sysdep.h>
no longer includes these definitions, so there is no cyclic dependency
anymore when computing the <tcb-offsets.h> constants.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Besides the option being gcc specific, this approach is still fragile
and not future proof since we do not know if this will be the only
optimization option gcc will add that transforms loops to memset
(or any libcall).
This patch adds a new header, dl-symbol-redir-ifunc.h, that can b
used to redirect the compiler generated libcalls to port the generic
memset implementation if required.
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Removal of legacy hwcaps support from the dynamic loader left
no users of _dl_string_hwcap.
Signed-off-by: Javier Pello <devel@otheo.eu>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Last commit made it so that the value passed for that parameter was
always 0 at its only call site.
Signed-off-by: Javier Pello <devel@otheo.eu>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
A new internal definition, __LIBC_LOCK_ALIGNMENT, is used to force
the 4-byte alignment only for m68k, other architecture keep the
natural alignment of the type used internally (and hppa does not
require 16-byte alignment for kernel-assisted CAS).
Reviewed-by: Florian Weimer <fweimer@redhat.com>
This reverts commit 6f85dbf102.
Once this change hits the release branches, it will require relinking
of all statically linked applications before static dlopen works
again, for the majority of updates on release branches: The NEWS file
is regularly updated with bug references, so the __libc_early_init
suffix changes, and static dlopen cannot find the function anymore.
While this ABI check is still technically correct (we do require
rebuilding & relinking after glibc updates to keep static dlopen
working), it is too drastic for stable release branches.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The files NEWS, include/link.h, and sysdeps/generic/ldsodefs.h
contribute to the version fingerprint used for detection. The
fingerprint can be further refined using the --with-extra-version-id
configure argument.
_dl_call_libc_early_init is replaced with _dl_lookup_libc_early_init.
The new function is used store a pointer to libc.so's
__libc_early_init function in the libc_map_early_init member of the
ld.so namespace structure. This function pointer can then be called
directly, so the separate invocation function is no longer needed.
The versioned symbol lookup needs the symbol versioning data
structures, so the initialization of libc_map and libc_map_early_init
is now done from _dl_check_map_versions, after this information
becomes available. (_dl_map_object_from_fd does not set this up
in time, so the initialization code had to be moved from there.)
This means that the separate initialization code can be removed from
dl_main because _dl_check_map_versions covers all maps, including
the initial executable loaded by the kernel. The lookup still happens
before relocation and the invocation of IFUNC resolvers, so IFUNC
resolvers are protected from ABI mismatch.
The __libc_early_init function pointer is not protected because
so little code runs between the pointer write and the invocation
(only dynamic linker code and IFUNC resolvers).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Rather than buffering 16 MiB of entropy in userspace (by way of
chacha20), simply call getrandom() every time.
This approach is doubtlessly slower, for now, but trying to prematurely
optimize arc4random appears to be leading toward all sorts of nasty
properties and gotchas. Instead, this patch takes a much more
conservative approach. The interface is added as a basic loop wrapper
around getrandom(), and then later, the kernel and libc together can
work together on optimizing that.
This prevents numerous issues in which userspace is unaware of when it
really must throw away its buffer, since we avoid buffering all
together. Future improvements may include userspace learning more from
the kernel about when to do that, which might make these sorts of
chacha20-based optimizations more possible. The current heuristic of 16
MiB is meaningless garbage that doesn't correspond to anything the
kernel might know about. So for now, let's just do something
conservative that we know is correct and won't lead to cryptographic
issues for users of this function.
This patch might be considered along the lines of, "optimization is the
root of all evil," in that the much more complex implementation it
replaces moves too fast without considering security implications,
whereas the incremental approach done here is a much safer way of going
about things. Once this lands, we can take our time in optimizing this
properly using new interplay between the kernel and userspace.
getrandom(0) is used, since that's the one that ensures the bytes
returned are cryptographically secure. But on systems without it, we
fallback to using /dev/urandom. This is unfortunate because it means
opening a file descriptor, but there's not much of a choice. Secondly,
as part of the fallback, in order to get more or less the same
properties of getrandom(0), we poll on /dev/random, and if the poll
succeeds at least once, then we assume the RNG is initialized. This is a
rough approximation, as the ancient "non-blocking pool" initialized
after the "blocking pool", not before, and it may not port back to all
ancient kernels, though it does to all kernels supported by glibc
(≥3.2), so generally it's the best approximation we can do.
The motivation for including arc4random, in the first place, is to have
source-level compatibility with existing code. That means this patch
doesn't attempt to litigate the interface itself. It does, however,
choose a conservative approach for implementing it.
Cc: Adhemerval Zanella Netto <adhemerval.zanella@linaro.org>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Cristian Rodríguez <crrodriguez@opensuse.org>
Cc: Paul Eggert <eggert@cs.ucla.edu>
Cc: Mark Harris <mark.hsj@gmail.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
It adds vectorized ChaCha20 implementation based on libgcrypt
cipher/chacha20-aarch64.S. It is used as default and only
little-endian is supported (BE uses generic code).
As for generic implementation, the last step that XOR with the
input is omited. The final state register clearing is also
omitted.
On a virtualized Linux on Apple M1 it shows the following
improvements (using formatted bench-arc4random data):
GENERIC MB/s
-----------------------------------------------
arc4random [single-thread] 380.89
arc4random_buf(16) [single-thread] 500.73
arc4random_buf(32) [single-thread] 552.61
arc4random_buf(48) [single-thread] 566.82
arc4random_buf(64) [single-thread] 574.01
arc4random_buf(80) [single-thread] 581.02
arc4random_buf(96) [single-thread] 591.19
arc4random_buf(112) [single-thread] 592.29
arc4random_buf(128) [single-thread] 596.43
-----------------------------------------------
OPTIMIZED MB/s
-----------------------------------------------
arc4random [single-thread] 569.60
arc4random_buf(16) [single-thread] 825.78
arc4random_buf(32) [single-thread] 987.03
arc4random_buf(48) [single-thread] 1042.39
arc4random_buf(64) [single-thread] 1075.50
arc4random_buf(80) [single-thread] 1094.68
arc4random_buf(96) [single-thread] 1130.16
arc4random_buf(112) [single-thread] 1129.58
arc4random_buf(128) [single-thread] 1137.91
-----------------------------------------------
Checked on aarch64-linux-gnu.
The implementation is based on scalar Chacha20 with per-thread cache.
It uses getrandom or /dev/urandom as fallback to get the initial entropy,
and reseeds the internal state on every 16MB of consumed buffer.
To improve performance and lower memory consumption the per-thread cache
is allocated lazily on first arc4random functions call, and if the
memory allocation fails getentropy or /dev/urandom is used as fallback.
The cache is also cleared on thread exit iff it was initialized (so if
arc4random is not called it is not touched).
Although it is lock-free, arc4random is still not async-signal-safe
(the per thread state is not updated atomically).
The ChaCha20 implementation is based on RFC8439 [1], omitting the final
XOR of the keystream with the plaintext because the plaintext is a
stream of zeros. This strategy is similar to what OpenBSD arc4random
does.
The arc4random_uniform is based on previous work by Florian Weimer,
where the algorithm is based on Jérémie Lumbroso paper Optimal Discrete
Uniform Generation from Coin Flips, and Applications (2013) [2], who
credits Donald E. Knuth and Andrew C. Yao, The complexity of nonuniform
random number generation (1976), for solving the general case.
The main advantage of this method is the that the unit of randomness is not
the uniform random variable (uint32_t), but a random bit. It optimizes the
internal buffer sampling by initially consuming a 32-bit random variable
and then sampling byte per byte. Depending of the upper bound requested,
it might lead to better CPU utilization.
Checked on x86_64-linux-gnu, aarch64-linux, and powerpc64le-linux-gnu.
Co-authored-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Yann Droneaud <ydroneaud@opteya.com>
[1] https://datatracker.ietf.org/doc/html/rfc8439
[2] https://arxiv.org/pdf/1304.1916.pdf
The main drive is to optimize the internal usage and required size
when sigset_t is embedded in other data structures. On Linux, the
current supported signal set requires up to 8 bytes (16 on mips),
was lower than the user defined sigset_t (128 bytes).
A new internal type internal_sigset_t is added, along with the
functions to operate on it similar to the ones for sigset_t. The
internal-signals.h is also refactored to remove unused functions
Besides small stack usage on some functions (posix_spawn, abort)
it lower the struct pthread by about 120 bytes (112 on mips).
Checked on x86_64-linux-gnu.
Reviewed-by: Arjun Shankar <arjun@redhat.com>
If an executable has copy relocations for extern protected data, that
can only work if the library containing the definition is built with
assumptions (a) the compiler emits GOT-generating relocations (b) the
linker produces R_*_GLOB_DAT instead of R_*_RELATIVE. Otherwise the
library uses its own definition directly and the executable accesses a
stale copy. Note: the GOT relocations defeat the purpose of protected
visibility as an optimization, but allow rtld to make the executable and
library use the same copy when copy relocations are present, but it
turns out this never worked perfectly.
ELF_RTYPE_CLASS_EXTERN_PROTECTED_DATA has strange semantics when both
a.so and b.so define protected var and the executable copy relocates
var: b.so accesses its own copy even with GLOB_DAT. The behavior change
is from commit 62da1e3b00 (x86) and then
copied to nios2 (ae5eae7cfc) and arc
(0e7d930c4c).
Without ELF_RTYPE_CLASS_EXTERN_PROTECTED_DATA, b.so accesses the copy
relocated data like a.so.
There is now a warning for copy relocation on protected symbol since
commit 7374c02b68. It's extremely
unlikely anyone relies on the ELF_RTYPE_CLASS_EXTERN_PROTECTED_DATA
behavior, so let's remove it: this removes a check in the symbol lookup
code.
Refine commit 349b0441da:
1. Copy relocations for extern protected data do not work properly,
regardless whether GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS is used.
It makes sense to produce a warning unconditionally.
2. Non-zero value of an undefined function symbol may break pointer
equality, but may be benign in many cases (many programs don't take the
address in the shared object then compare it with the address in the
executable). Reword the diagnostic to be clearer.
3. Remove the unneeded condition !(undef_map->l_1_needed &
GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS). If the executable does
not not have GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS (can only
occur in error cases), the diagnostic should be emitted as well.
When the defining shared object has
GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS, report an error to apply
the intended enforcement.
Both float, double, and _Float128 are assumed to be supported
(float and double already only uses builtins). Only long double
is parametrized due GCC bug 29253 which prevents its usage on
powerpc.
It allows to remove i686, ia64, x86_64, powerpc, and sparc arch
specific implementation.
On ia64 it also fixes the sNAN handling:
math/test-float64x-fabs
math/test-ldouble-fabs
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc-linux-gnu,
powerpc64-linux-gnu, sparc64-linux-gnu, and ia64-linux-gnu.
Unroll slightly and enforce good instruction scheduling. This improves
performance on out-of-order machines. The unrolling allows for
pipelined multiplies.
As well, as an optional sysdep, reorder the operations and prevent
reassosiation for better scheduling and higher ILP. This commit
only adds the barrier for x86, although it should be either no
change or a win for any architecture.
Unrolling further started to induce slowdowns for sizes [0, 4]
but can help the loop so if larger sizes are the target further
unrolling can be beneficial.
Results for _dl_new_hash
Benchmarked on Tigerlake: 11th Gen Intel(R) Core(TM) i7-1165G7 @ 2.80GHz
Time as Geometric Mean of N=30 runs
Geometric of all benchmark New / Old: 0.674
type, length, New Time, Old Time, New Time / Old Time
fixed, 0, 2.865, 2.72, 1.053
fixed, 1, 3.567, 2.489, 1.433
fixed, 2, 2.577, 3.649, 0.706
fixed, 3, 3.644, 5.983, 0.609
fixed, 4, 4.211, 6.833, 0.616
fixed, 5, 4.741, 9.372, 0.506
fixed, 6, 5.415, 9.561, 0.566
fixed, 7, 6.649, 10.789, 0.616
fixed, 8, 8.081, 11.808, 0.684
fixed, 9, 8.427, 12.935, 0.651
fixed, 10, 8.673, 14.134, 0.614
fixed, 11, 10.69, 15.408, 0.694
fixed, 12, 10.789, 16.982, 0.635
fixed, 13, 12.169, 18.411, 0.661
fixed, 14, 12.659, 19.914, 0.636
fixed, 15, 13.526, 21.541, 0.628
fixed, 16, 14.211, 23.088, 0.616
fixed, 32, 29.412, 52.722, 0.558
fixed, 64, 65.41, 142.351, 0.459
fixed, 128, 138.505, 295.625, 0.469
fixed, 256, 291.707, 601.983, 0.485
random, 2, 12.698, 12.849, 0.988
random, 4, 16.065, 15.857, 1.013
random, 8, 19.564, 21.105, 0.927
random, 16, 23.919, 26.823, 0.892
random, 32, 31.987, 39.591, 0.808
random, 64, 49.282, 71.487, 0.689
random, 128, 82.23, 145.364, 0.566
random, 256, 152.209, 298.434, 0.51
Co-authored-by: Alexander Monakov <amonakov@ispras.ru>
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
This was added on Linux 5.6 (8649c322f75c96e7ced2fec201e123b2b073bf09)
as a way to retrieve a file descriptors for another process though
pidfd (created either with CLONE_PIDFD or pidfd_getfd). The
functionality is similar to recvmmsg SCM_RIGHTS.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
_dl_skip_args is always 0, so the target specific code that modifies
argv after relro protection is applied is no longer used.
After the patch relro protection is applied to _dl_argv consistently
on all targets.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The Linux version used by i686 and m68k provide three overrrides for
generic code:
1. DISTINGUISH_LIB_VERSIONS to print additional information when
libc5 is used by a dependency.
2. EXTRA_LD_ENVVARS to that enabled LD_LIBRARY_VERSION environment
variable.
3. EXTRA_UNSECURE_ENVVARS to add two environment variables related
to aout support.
None are really requires, it has some decades since libc5 or aout
suppported was removed and Linux even remove support for aout files.
The LD_LIBRARY_VERSION is also dead code, dl_correct_cache_id is not
used anywhere.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
The kernel version check is used to avoid glibc to run on older
kernels where some syscall are not available and fallback code are
not enabled to handle graciously fail. However, it does not prevent
if the kernel does not correctly advertise its version through
vDSO note, uname or procfs.
Also kernel version checks are sometime not desirable by users,
where they want to deploy on different system with different kernel
version knowing the minimum set of syscall is always presented on
such systems.
The kernel version check has been removed along with the
LD_ASSUME_KERNEL environment variable. The minimum kernel used to
built glibc is still provided through NT_GNU_ABI_TAG ELF note and
also printed when libc.so is issued.
Checked on x86_64-linux-gnu.
This implements mmap fallback for a brk failure during TLS
allocation.
scripts/tls-elf-edit.py is updated to support the new patching method.
The script no longer requires that in the input object is of ET_DYN
type.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The siglist.c is built with -fno-toplevel-reorder to avoid compiler
to reorder the compat assembly directives due an assembler
issue [1] (fixed on 2.39).
This patch removes the compiler flags by split the compat symbol
generation in two phases. First the __sys_siglist and __sys_sigabbrev
without any compat symbol directive is preprocessed to generate an
assembly source code. This generate assembly is then used as input
on a platform agnostic siglist.S which then creates the compat
definitions. This prevents compiler to move any compat directive
prior the _sys_errlist definition itself.
Checked on a make check run-built-tests=no on all affected ABIs.
Reviewed-by: Fangrui Song <maskray@google.com>
'get_fast_jitter' is meant to be used purely for performance
purposes. In all cases it's used it should be acceptable to get no
randomness (see default case). An example use case is in setting
jitter for retries between threads at a lock. There is a
performance benefit to having jitter, but only if the jitter can
be generated very quickly and ultimately there is no serious issue
if no jitter is generated.
The implementation generally uses 'HP_TIMING_NOW' iff it is
inlined (avoid any potential syscall paths).
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
After 73fc4e28b9,
__libc_enable_secure_decided is always 0 and a statically linked
executable may overwrite __libc_enable_secure without considering
AT_SECURE.
The __libc_enable_secure has been correctly initialized in _dl_aux_init,
so just remove __libc_enable_secure_decided and __libc_init_secure.
This allows us to remove some startup_get*id functions from
22b79ed7f4.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
It is not used on rtld and ldsodef interfaces are meant to be used
solely on loader. It also removes the only usage of gcc extension
__builtin_va_arg_pack.
Prelinked binaries and libraries still work, the dynamic tags
DT_GNU_PRELINKED, DT_GNU_LIBLIST, DT_GNU_CONFLICT just ignored
(meaning the process is reallocated as default).
The loader environment variable TRACE_PRELINKING is also removed,
since it used solely on prelink.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
It is not Hurd-specific, but H.J. Lu wants it there.
Also, dc.a can be used to avoid hardcoding .long vs .quad and thus use
the same implementation for i386 and x86_64.
The rtld audit support show two problems on aarch64:
1. _dl_runtime_resolve does not preserve x8, the indirect result
location register, which might generate wrong result calls
depending of the function signature.
2. The NEON Q registers pushed onto the stack by _dl_runtime_resolve
were twice the size of D registers extracted from the stack frame by
_dl_runtime_profile.
While 2. might result in wrong information passed on the PLT tracing,
1. generates wrong runtime behaviour.
The aarch64 rtld audit support is changed to:
* Both La_aarch64_regs and La_aarch64_retval are expanded to include
both x8 and the full sized NEON V registers, as defined by the
ABI.
* dl_runtime_profile needed to extract registers saved by
_dl_runtime_resolve and put them into the new correctly sized
La_aarch64_regs structure.
* The LAV_CURRENT check is change to only accept new audit modules
to avoid the undefined behavior of not save/restore x8.
* Different than other architectures, audit modules older than
LAV_CURRENT are rejected (both La_aarch64_regs and La_aarch64_retval
changed their layout and there are no requirements to support multiple
audit interface with the inherent aarch64 issues).
* A new field is also reserved on both La_aarch64_regs and
La_aarch64_retval to support variant pcs symbols.
Similar to x86, a new La_aarch64_vector type to represent the NEON
register is added on the La_aarch64_regs (so each type can be accessed
directly).
Since LAV_CURRENT was already bumped to support bind-now, there is
no need to increase it again.
Checked on aarch64-linux-gnu.
Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The audit symbind callback is not called for binaries built with
-Wl,-z,now or when LD_BIND_NOW=1 is used, nor the PLT tracking callbacks
(plt_enter and plt_exit) since this would change the expected
program semantics (where no PLT is expected) and would have performance
implications (such as for BZ#15533).
LAV_CURRENT is also bumped to indicate the audit ABI change (where
la_symbind flags are set by the loader to indicate no possible PLT
trace).
To handle powerpc64 ELFv1 function descriptor, _dl_audit_symbind
requires to know whether bind-now is used so the symbol value is
updated to function text segment instead of the OPD (for lazy binding
this is done by PPC64_LOAD_FUNCPTR on _dl_runtime_resolve).
Checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu,
powerpc64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
For audit modules and dependencies with initial-exec TLS, we can not
set the initial TLS image on default loader initialization because it
would already be set by the audit setup. However, subsequent thread
creation would need to follow the default behaviour.
This patch fixes it by setting l_auditing link_map field not only
for the audit modules, but also for all its dependencies. This is
used on _dl_allocate_tls_init to avoid the static TLS initialization
at load time.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Add <dl-r_debug.h> to get the adddress of the r_debug structure after
relocation and its offset before relocation from the PT_DYNAMIC segment
to support DT_DEBUG, DT_MIPS_RLD_MAP_REL and DT_MIPS_RLD_MAP.
Co-developed-by: Xi Ruoyao <xry111@mengyan1223.wang>
The usage of internal static symbol for statically linked binaries
does not work correctly for objects built with -D_TIME_BITS=64,
since the internal definition does not provide the expected aliases.
This patch makes it to use the default stat functions instead (which
uses the default 64 time_t alias and types).
Checked on i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The usage of internal static symbol for statically linked binaries
does not work correctly for objects built with -D_TIME_BITS=64,
since the internal definition does not provide the expected aliases.
This patch makes it to use the default stat functions instead (which
uses the default 64 time_t alias and types).
Checked on i686-linux-gnu.
Converting double precision constants to float is now affected by the
runtime dynamic rounding mode instead of being evaluated at compile
time with default rounding mode (except static object initializers).
This can change the computed result and cause performance regression.
The known correctness issues (increased ulp errors) are already fixed,
this patch fixes remaining cases of unnecessary runtime conversions.
Add float M_* macros to math.h as new GNU extension API. To avoid
conversions the new M_* macros are used and instead of casting double
literals to float, use float literals (only required if the conversion
is inexact).
The patch was tested on aarch64 where the following symbols had new
spurious conversion instructions that got fixed:
__clog10f
__gammaf_r_finite@GLIBC_2.17
__j0f_finite@GLIBC_2.17
__j1f_finite@GLIBC_2.17
__jnf_finite@GLIBC_2.17
__kernel_casinhf
__lgamma_negf
__log1pf
__y0f_finite@GLIBC_2.17
__y1f_finite@GLIBC_2.17
cacosf
cacoshf
casinhf
catanf
catanhf
clogf
gammaf_positive
Fixes bug 28713.
Reviewed-by: Paul Zimmermann <Paul.Zimmermann@inria.fr>
