For k1 in 1 and 3, n can only have values of 0 and 2, so checking k1 &
2 is equivalent to checking n & 2. We prefer the latter so that we
don't use k1 for anything other than selecting the quadrant in
do_sincos_1, thus dropping it completely.
The previous logic was:
"Compute sine for the value and based on the new rotated quadrant
(k1) negate the value if we're in the fourth quadrant."
With this change, the logic now is:
"Compute sine for the value and negate it if we were either (1) in
the fourth quadrant or (2) we actually wanted the cosine and were
in the third quadrant."
* sysdeps/ieee754/dbl-64/s_sin.c (do_sincos_1): Check N
instead of K1.
The do_sincos_* functions are helpers to compute sin/cos, where they
get cosine by computing sine for the next quadrant. This is decided
with the value of K passed to it, which is the amount by which to
shift the quadrant. Since we will only need the shift to be 0 or 1,
we make K a bool to make that explicit.
* sysdeps/ieee754/dbl-64/s_sin.c (do_sincos_1): Rename K to
SHIFT_QUADRANT and make it bool.
(do_sincos_2): Likewise.
(sloww): Likewise.
(sloww1): Likewise.
(__sin): Adjust calls to do_sincos_1 and do_sincos_2.
(__cos): Likewise.
As described in
<https://sourceware.org/ml/libc-alpha/2016-10/msg00047.html>, there is
an include ordering issue with the integer width macros in glibc's
<limits.h>, where definitions conditional on LONG_MAX do not work as
intended because when the headers are installed, this part of glibc's
<limits.h> is processed before the part of GCC's <limits.h> that will
define LONG_MAX. This patch changes the definitions just to use
__WORDSIZE for the expansion of LONG_WIDTH and ULONG_WIDTH rather than
making those definitions conditional on LONG_MAX.
Tested for x86_64 and x86.
* include/limits.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (LONG_WIDTH):
Define to __WORDSIZE, not conditional on [LONG_MAX ==
0x7fffffffL].
[__GLIBC_USE (IEC_60559_BFP_EXT)] (ULONG_WIDTH): Likewise.
Fix powerpc-specific headers:
- Make it compatible to C89 by replace references to inline by __inline__.
- Get the definition of sigset_t used by
sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h.
- Includes missing header file.
Linux 4.8 adds TCP_REPAIR_WINDOW to include/uapi/linux/tcp.h. This
patch adds it to sysdeps/gnu/netinet/tcp.h accordingly, along with
struct tcp_repair_window as requested in
<https://sourceware.org/ml/libc-alpha/2016-10/msg00019.html>.
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).
* sysdeps/gnu/netinet/tcp.h (TCP_REPAIR_WINDOW): New macro.
(struct tcp_repair_window): New type.
Add string.h to avoid tst-memstream3 build failure in some environments:
tst-memstream3.c:32:17: error: implicit declaration of function 'strcmp' [-Werror=implicit-function-declaration]
# define STRCMP strcmp
^
tst-memstream3.c:96:7: note: in expansion of macro 'STRCMP'
if (STRCMP (buf, W("b")) != 0)
Checked on x86_64.
* libio/tst-memstream3.c: Include string.h.
This patches fixes multiples issues on open_{w}memstream reported on both
BZ#18241 and BZ#20181:
- failed fseek does not set errno.
- negative offset in fseek fails even when resulting position is
a valid one.
- a flush after write if the current write position is not at the
end of the stream currupt data.
The main fix is on seek operation for memstream (_IO_{w}str_seekoff), where
both _IO_read_ptr and _IO_read_end pointer are updated if a write operation
has occured (similar to default file operations). Also, to calculate the
offset on both read and write pointers, a temporary value is instead of
updating the argument supplied value. Negative offset are valid if resulting
internal pointer is within the range of _IO_{read,write}_base and
_IO_{read,write}_end.
Also POSIX states that a null or wide null shall be appended to the current
buffer iff a write moves the position to a value larger than the current
lenght. Current implementation appends a null or wide null regardless
of this condition. This patch fixes it by removing the 'else' condition
on _IO_{w}mem_sync.
Checked on x86_64.
[BZ #18241]
[BZ #20181]
* libio/Makefile (test): Add tst-memstream3 and tst-wmemstream3.
* libio/memstream.c (_IO_mem_sync): Only append a null byte if
write position is at the end the buffer.
* libio/wmemstream.c (_IO_wmem_sync): Likewise.
* libio/strops.c (_IO_str_switch_to_get_mode): New function.
(_IO_str_seekoff): Set correct offset from negative displacement and
set EINVAL for invalid ones.
* libio/wstrops.c (enlarge_userbuf): Use correct function to calculate
buffer length.
(_IO_wstr_switch_to_get_mode): New function.
(_IO_wstr_seekoff): Set correct offset from negative displacement and
set EINVAL for invalid ones.
* libio/tst-memstream3.c: New file.
* libio/tst-wmemstream3.c: Likewise.
* manual/examples/memstrm.c: Remove warning when priting size_t.
sysdeps/ieee754/dbl-64/dla.h can use a macro DLA_FMS for more
efficient double-width operations when fused multiply-subtract is
supported. However, this macro is only defined for x86_64,
conditional on architecture-specific __FMA4__. This patch makes the
code use __builtin_fma conditional on __FP_FAST_FMA, as used elsewhere
in glibc.
Tested for x86_64, x86 and powerpc. On powerpc (where this is causing
fused operations to be used where they weren't previously) I see an
increase from 1ulp to 2ulp in the imaginary part of clog10:
testing double (without inline functions)
Failure: Test: Imaginary part of: clog10 (0x1.7a858p+0 - 0x6.d940dp-4 i)
Result:
is: -1.2237865208199886e-01 -0x1.f5435146bb61ap-4
should be: -1.2237865208199888e-01 -0x1.f5435146bb61cp-4
difference: 2.7755575615628914e-17 0x1.0000000000000p-55
ulp : 2.0000
max.ulp : 1.0000
Maximal error of real part of: clog10
is : 3 ulp
accepted: 3 ulp
Maximal error of imaginary part of: clog10
is : 2 ulp
accepted: 1 ulp
This is actually resulting from atan2 becoming *more* accurate (atan2
(-0x6.d940dp-4, 0x1.7a858p+0) should ideally be -0x1.208cd6e841554p-2
but was -0x1.208cd6e841555p-2 from a powerpc libm built before this
change, and is -0x1.208cd6e841554p-2 from a powerpc libm built after
this change). Since these functions are not expected to be correctly
rounding by glibc's accuracy goals, neither result is a problem, but
this does imply that some of this code, although designed to be
correctly rounding, is not in fact correctly rounding (possibly
because of GCC creating fused operations where the code does not
expect it, something we've only disabled for specific functions where
it was found to cause large errors). (Of course as previously
discussed I think we should remove the slow cases where an error
analysis shows this wouldn't increase the errors much above 0.5ulp;
it's only functions such as cratan2 that are expected to be correctly
rounding, not atan2.)
* sysdeps/ieee754/dbl-64/dla.h [__FP_FAST_FMA] (DLA_FMS): Define
macro to use __builtin_fma.
* sysdeps/x86_64/fpu/dla.h: Remove file.
This patch fixes the ldbl-128ibm version of the iscanonical macro not
to use __iscanonicall when long double = double (-mlong-double-64).
Tested for powerpc.
* sysdeps/ieee754/ldbl-128ibm/bits/iscanonical.h
[__NO_LONG_DOUBLE_MATH] (__iscanonicall): Do not declare.
[__NO_LONG_DOUBLE_MATH] (iscanonical): Define to evaluate to 1.
The function _dl_addr_inside_object is simplified by removing
the conditional 'reladdr - l->l_phdr[n].p_vaddr >= 0' which is
always true. The function is refactored into it's own object file
and a unit test added to verify the correct behaviour of the
function.
TS 18661-1 adds an iscanonical classification macro to <math.h>.
The motivation for this is decimal floating-point, where some values
have both canonical and noncanonical encodings. For IEEE binary
interchange formats, all encodings are canonical. For x86/m68k
ldbl-96, and for ldbl-128ibm, there are encodings that do not
represent any valid value of the type; although formally iscanonical
does not need to handle trap representations (and so could just always
return 1), it seems useful, and in line with the description in the TS
of "representations that are extraneous to the floating-point model"
as being non-canonical (as well as "redundant representations of some
or all of its values"), for it to detect those representations and
return 0 for them.
This patch adds iscanonical to glibc. It goes in a header
<bits/iscanonical.h>, included under appropriate conditions in
<math.h>. The default header version just evaluates the argument
(converted to its semantic type, though current GCC will probably
discard that conversion and any exceptions resulting from it) and
returns 1. ldbl-96 and ldbl-128ibm then have versions of the header
that call a function __iscanonicall for long double (the sizeof-based
tests will of course need updating for float128 support, like other
such type-generic macro implementations). The ldbl-96 version of
__iscanonicall has appropriate conditionals to reflect the differences
in the m68k version of that format (where the high mantissa bit may be
either 0 or 1 when the exponent is 0 or 0x7fff). Corresponding tests
for those formats are added as well. Other architectures do not have
any new functions added because just returning 1 is correct for all
their floating-point formats.
Tested for x86_64, x86, mips64 (to test the default macro version) and
powerpc.
* math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Include
<bits/iscanonical.h>.
* bits/iscanonical.h: New file.
* math/s_iscanonicall.c: Likewise.
* math/Versions (__iscanonicall): New libm symbol at version
GLIBC_2.25.
* math/libm-test.inc (iscanonical_test_data): New array.
(iscanonical_test): New function.
(main): Call iscanonical_test.
* math/Makefile (headers): Add bits/iscanonical.h.
(type-ldouble-routines): Add s_iscanonicall.
* manual/arith.texi (Floating Point Classes): Document
iscanonical.
* manual/libm-err-tab.pl: Update comment on interfaces without
ulps tabulated.
* sysdeps/ieee754/ldbl-128ibm/bits/iscanonical.h: New file.
* sysdeps/ieee754/ldbl-128ibm/s_iscanonicall.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/test-iscanonical-ldbl-128ibm.c:
Likewise.
* sysdeps/ieee754/ldbl-128ibm/Makefile (tests): Add
test-iscanonical-ldbl-128ibm.
* sysdeps/ieee754/ldbl-96/bits/iscanonical.h: New file.
* sysdeps/ieee754/ldbl-96/s_iscanonicall.c: Likewise.
* sysdeps/ieee754/ldbl-96/test-iscanonical-ldbl-96.c: Likewise.
* sysdeps/ieee754/ldbl-96/Makefile: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Update.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
The new check-installed-headers rule check now complains with C++
comment from string3.h with:
../string/bits/string3.h:129:1: error: C++ style comments are not allowed in ISO C90
// XXX We have no corresponding builtin yet.
Let use old C style comment to make compiler happy in old modes.
Tested on x86_64.
* string/bits/string3.h: Remove C++ style comments.
These are remaining cases where we can deduce and conclude that the
sign of the result should be the same as the sign of the input being
checked. For example, for sin(x), the sign of the result is the same
as the result itself for x < pi. Likewise, for sine values where x
after range reduction falls into this range and its sign is preserved.
* sysdeps/ieee754/dbl-64/s_sin.c (do_sincos_1): Use copysign
instead of ternary condition.
(do_sincos_2): Likewise.
(__sin): Likewise.
(__cos): Likewise.
(slow): Likewise.
(sloww): Likewise.
(sloww1): Likewise.
(bsloww): Likewise.
(bsloww1): Likewise.
This is the first very simple substitution of ternary conditions for
correction adjustments with __copysign for positive constants.
* sysdeps/ieee754/dbl-64/s_sin.c (do_cos_slow): use copysign
instead of ternary condition.
(do_sin_slow): Likewise.
(do_sincos_1): Likewise.
(do_sincos_2): Likewise.
(__cos): Likewise.
(sloww): Likewise.
(sloww1): Likewise.
(sloww2): Likewise.
(bsloww): Likewise.
(bsloww1): Likewise.
(bsloww2): Likewise.
Simplify the code a bit by consolidating sign checks in slow1 and
slow2 into __sin at the higher level.
* sysdeps/ieee754/dbl-64/s_sin.c (slow1): Consolidate sign
check from here...
(slow2): ... and here...
(__sin): ... to here.
Floating-point classification macros are supposed to remove any excess
range or precision from their arguments. This patch fixes the
non-sNaN version of iszero to do so, by casting the argument to its
own type. (This will of course work only for standard-conforming
excess precision, not for what GCC does on 32-bit x86 by default where
the back end hides excess precision from the front end; the same
applies to most of the classification macros in that case, as showed
up when we made them use GCC built-in functions.)
(iseqsig will have the reverse issue, needing to ensure that when an
underlying function is used it's for a type wide enough not to remove
any excess precision, since comparison macros must not remove excess
precision.)
Tested for x86_64 and x86.
* math/math.h
[__GLIBC_USE (IEC_60559_BFP_EXT) && !__SUPPORT_SNAN__] (iszero):
Cast argument to its own type.
* math/test-iszero-excess-precision.c: New file.
* math/Makefile (tests): Add test-iszero-excess-precision.
(CFLAGS-test-iszero-excess-precision.c): New variable.
On posix_spawn open file action (issued by posix_spawn_file_actions_addopen)
POSIX states that if fildes was already an open file descriptor, it shall be
closed before the new file is openedi [1]. This avoid pontential issues when
posix_spawn plus addopen action is called with the process already at maximum
number of file descriptor opened and also for multiple actions on single-open
special paths (like /dev/watchdog).
This fixes its behavior on Linux posix_spawn implementation and also adds
a tests to check for its behavior.
Checked on x86_64.
* posix/Makefile (tests): Add tst-spawn3.
* posix/tst-spawn3.c: New file.
* sysdeps/unix/sysv/linux/spawni.c (__spawni_child): Close file descriptor
if it is already opened for open action.
[1] http://pubs.opengroup.org/onlinepubs/9699919799/functions/posix_spawn_file_actions_addclose.html
Using CLONE_VFORK already ensures that the parent does not run until the
child has either exec'ed succesfully or called _exit. Hence we don't
need to read from a CLOEXEC pipe to ensure proper synchronization - we
just make explicit use of the fact the the child and parent run in the
same VM, so the child can write an error code to a field of the
posix_spawn_args struct instead of sending it through a pipe.
To ensure that this mechanism really works, the parent initializes the
field to -1 and the child writes 0 before execing.
This eliminates some annoying bookkeeping that is necessary to avoid
the file actions from clobbering the write end of the pipe, and
getting rid of the pipe creation in the first place means fewer system
calls (four in the parent, usually one in the child) and fewer
chanches for the spawn to fail (e.g. if we're close to EMFILE).
Checked on x86_64 and i686.
* sysdeps/unix/sysv/linux/spawni.c (posix_spawn_args): Remove pipe
field, add err field.
(__spawni_child): Report error through err member instead of pipe.
(__spawnix): Likewise.
This patch adds two new macros for internal and inline syscall to use
within GLIBC: INTERNAL_SYSCALL_CALL and INLINE_SYSCALL_CALL. They are
similar to the old INTERNAL_SYSCALL and INLINE_SYSCALL with the difference
the new macros accept a variable argument call and do not require to pass
the expected argument size.
The advantage is it is possible to use variable argument macros like
SYSCALL_LL{64} without the need to also handle the argument size. So
for an ABI where SYSCALL_LL might split the argument in high and low
parts, instead of:
INTERNAL_SYSCALL_DECL (err);
#if ...
INTERNAL_SYSCALL (syscall, err, 2, SYSCALL_LL (len));
#else
INTERNAL_SYSCALL (syscall, err, 1, SYSCALL_LL (len));
#endif
It will be just:
INTERNAL_SYSCALL_CALL (syscall, err, SYSCALL_LL (len));
The INLINE_SYSCALL_CALL follows the same semanthic regarding the argument
and is similar to INLINE_SYSCALL regarding setting errno.
Checked with a build for x86_64, i386, aach64, armhf, powerpc64le, powerpc32,
and mips32. No code generation changed.
* sysdeps/unix/sysdep.h (__INTERNAL_SYSCALL0): New macro.
(__INTERNAL_SYSCALL1): Likewise.
(__INTERNAL_SYSCALL2): Likewise.
(__INTERNAL_SYSCALL3): Likewise.
(__INTERNAL_SYSCALL4): Likewise.
(__INTERNAL_SYSCALL5): Likewise.
(__INTERNAL_SYSCALL6): Likewise.
(__INTERNAL_SYSCALL7): Likewise.
(__INTERNAL_SYSCALL_NARGS_X): Likewise.
(__INTERNAL_SYSCALL_NARGS): Likewise.
(__INTERNAL_SYSCALL_DISP): Likewise.
(INTERNAL_SYSCALL_CALL): Likewise.
(__SYSCALL0): Rename to __INLINE_SYSCALL0.
(__SYSCALL1): Rename to __INLINE_SYSCALL1.
(__SYSCALL2): Rename to __INLINE_SYSCALL2.
(__SYSCALL3): Rename to __INLINE_SYSCALL3.
(__SYSCALL4): Rename to __INLINE_SYSCALL4.
(__SYSCALL5): Rename to __INLINE_SYSCALL5.
(__SYSCALL6): Rename to __INLINE_SYSCALL6.
(__SYSCALL7): Rename to __INLINE_SYSCALL7.
(__SYSCALL_NARGS_X): Rename to __INLINE_SYSCALL_NARGS_X.
(__SYSCALL_NARGS): Rename to __INLINE_SYSCALL_NARGS.
(__SYSCALL_DISP): Rename to __INLINE_SYSCALL_DISP.
(__SYSCALL_CALL): Rename to INLINE_SYSCALL_CALL.
(SYSCALL_CANCEL): Replace __SYSCALL_CALL with INLINE_SYSCALL_CALL.
TS 18661-1 adds an iszero classification macro to <math.h>. This
patch implements it for glibc. There are no new underlying functions
in libm because the implementation uses fpclassify when sNaN support
is required and a direct comparison otherwise; any optimizations for
this macro should be done through adding __builtin_iszero in GCC and
using it in the header for suitable GCC versions, not through adding
other optimized inline or out-of-line versions to glibc.
Tested for x86_64 and x86.
* math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (iszero): New
macro.
* math/libm-test.inc (iszero_test_data): New array.
(iszero_test): New function.
(main): Call iszero_test.
* manual/arith.texi (Floating Point Classes): Document iszero.
* manual/libm-err-tab.pl: Update comment on interfaces without
ulps tabulated.
This adds a test to ensure that the problems fixed in the last several
patches do not recur. Each directory checks the headers that it
installs for two properties: first, each header must be compilable in
isolation, as both C and C++, under a representative combination of
language and library conformance levels; second, there is a blacklist
of identifiers that may not appear in any installed header, currently
consisting of the legacy BSD typedefs. (There is an exemption for the
headers that define those typedefs, and for the RPC headers. It may be
necessary to make this more sophisticated if we add more stuff to the
blacklist in the future.)
In order for this test to work correctly, every wrapper header
that actually defines something must guard those definitions with
#ifndef _ISOMAC. This is the existing mechanism used by the conform/
tests to tell wrapper headers not to define anything that the public
header wouldn't, and not to use anything from libc-symbols.h. conform/
only cares for headers that we need to check for standards conformance,
whereas this test applies to *every* header. (Headers in include/ that
are either installed directly, or are internal-use-only and do *not*
correspond to any installed header, are not affected.)
* scripts/check-installed-headers.sh: New script.
* Rules: In each directory that defines header files to be installed,
run check-installed-headers.sh on them as a special test.
* Makefile: Likewise for the headers installed at top level.
* include/aliases.h, include/alloca.h, include/argz.h
* include/arpa/nameser.h, include/arpa/nameser_compat.h
* include/elf.h, include/envz.h, include/err.h
* include/execinfo.h, include/fpu_control.h, include/getopt.h
* include/gshadow.h, include/ifaddrs.h, include/libintl.h
* include/link.h, include/malloc.h, include/mcheck.h
* include/mntent.h, include/netinet/ether.h
* include/nss.h, include/obstack.h, include/printf.h
* include/pty.h, include/resolv.h, include/rpc/auth.h
* include/rpc/auth_des.h, include/rpc/auth_unix.h
* include/rpc/clnt.h, include/rpc/des_crypt.h
* include/rpc/key_prot.h, include/rpc/netdb.h
* include/rpc/pmap_clnt.h, include/rpc/pmap_prot.h
* include/rpc/pmap_rmt.h, include/rpc/rpc.h
* include/rpc/rpc_msg.h, include/rpc/svc.h
* include/rpc/svc_auth.h, include/rpc/xdr.h
* include/rpcsvc/nis_callback.h, include/rpcsvc/nislib.h
* include/rpcsvc/yp.h, include/rpcsvc/ypclnt.h
* include/rpcsvc/ypupd.h, include/shadow.h
* include/stdio_ext.h, include/sys/epoll.h
* include/sys/file.h, include/sys/gmon.h, include/sys/ioctl.h
* include/sys/prctl.h, include/sys/profil.h
* include/sys/statfs.h, include/sys/sysctl.h
* include/sys/sysinfo.h, include/ttyent.h, include/utmp.h
* sysdeps/arm/nacl/include/bits/setjmp.h
* sysdeps/mips/include/sys/asm.h
* sysdeps/unix/sysv/linux/include/sys/sysinfo.h
* sysdeps/unix/sysv/linux/include/sys/timex.h
* sysdeps/x86/fpu/include/bits/fenv.h:
Add #ifndef _ISOMAC guard around internal declarations.
Add multiple-inclusion guard if not already present.
sys/ucontext.h unconditionally uses stack_t, and it does not make
sense to change that. But signal.h only declares stack_t under
__USE_XOPEN_EXTENDED || __USE_XOPEN2K8. The actual definition is
already in a bits header, bits/sigstack.h, but that header insists on
only being included by signal.h, so we have to change that as well as
all of the sys/ucontext.h variants. (Some but not all variants of
bits/sigcontext.h, which sys/ucontext.h may also need, had already
received this adjustment; for consistency, I made them all the same,
even if that's not strictly necessary in some configurations.)
bits/sigcontext.h and bits/sigstack.h also all need to receive
multiple inclusion guards.
* sysdeps/generic/sys/ucontext.h
* sysdeps/arm/sys/ucontext.h
* sysdeps/i386/sys/ucontext.h
* sysdeps/m68k/sys/ucontext.h
* sysdeps/mips/sys/ucontext.h
* sysdeps/unix/sysv/linux/aarch64/sys/ucontext.h
* sysdeps/unix/sysv/linux/alpha/sys/ucontext.h
* sysdeps/unix/sysv/linux/arm/sys/ucontext.h
* sysdeps/unix/sysv/linux/hppa/sys/ucontext.h
* sysdeps/unix/sysv/linux/ia64/sys/ucontext.h
* sysdeps/unix/sysv/linux/m68k/sys/ucontext.h
* sysdeps/unix/sysv/linux/mips/sys/ucontext.h
* sysdeps/unix/sysv/linux/nios2/sys/ucontext.h
* sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h
* sysdeps/unix/sysv/linux/s390/sys/ucontext.h
* sysdeps/unix/sysv/linux/sh/sys/ucontext.h
* sysdeps/unix/sysv/linux/sparc/sys/ucontext.h
* sysdeps/unix/sysv/linux/tile/sys/ucontext.h
* sysdeps/unix/sysv/linux/x86/sys/ucontext.h:
Include both bits/sigcontext.h and bits/sigstack.h.
Fix grammar error in comment, if present.
* bits/sigstack.h
* sysdeps/unix/sysv/linux/aarch64/bits/sigstack.h
* sysdeps/unix/sysv/linux/alpha/bits/sigstack.h
* sysdeps/unix/sysv/linux/bits/sigstack.h
* sysdeps/unix/sysv/linux/ia64/bits/sigstack.h
* sysdeps/unix/sysv/linux/mips/bits/sigstack.h
* sysdeps/unix/sysv/linux/powerpc/bits/sigstack.h
* sysdeps/unix/sysv/linux/sparc/bits/sigstack.h
* bits/sigcontext.h
* sysdeps/mach/hurd/i386/bits/sigcontext.h
* sysdeps/unix/sysv/linux/bits/sigcontext.h
* sysdeps/unix/sysv/linux/ia64/bits/sigcontext.h
* sysdeps/unix/sysv/linux/sparc/bits/sigcontext.h:
Add multiple inclusion guard. Permit inclusion by sys/ucontext.h
as well as signal.h, if this was not already allowed. Request
definition of size_t if necessary. Minimize semantically-null
differences across files.
Many headers are expected to expose a subset of the type definitions
in time.h. time.h has a whole bunch of messy logic for conditionally
defining some its types and structs, but, as best I can tell, this
has never worked 100%. In particular, __need_timespec is ineffective
if _TIME_H has already been defined, which means that if you compile
#include <time.h>
#include <sched.h>
with e.g. -fsyntax-only -std=c89 -Wall -Wsystem-headers, you will get
In file included from test.c:2:0:
/usr/include/sched.h:74:57: warning: "struct timespec" declared inside
parameter list will not be visible outside of this definition or declaration
extern int sched_rr_get_interval (__pid_t __pid, struct timespec *__t) __THROW;
^~~~~~~~
And if you want to _use_ sched_rr_get_interval in a TU compiled that
way, you're hosed.
This patch replaces all of that with small bits/types/TYPE.h headers
as introduced earlier. time.h and bits/time.h are now *much* simpler,
and a lot of other headers are slightly simpler.
* time/time.h, bits/time.h, sysdeps/unix/sysv/linux/bits/time.h:
Remove all logic conditional on __need macros. Move all the
conditionally defined types to their own headers...
* time/bits/types/clock_t.h: Define clock_t here.
* time/bits/types/clockid_t.h: Define clockid_t here.
* time/bits/types/struct_itimerspec.h: Define struct itimerspec here.
* time/bits/types/struct_timespec.h: Define struct timespec here.
* time/bits/types/struct_timeval.h: Define struct timeval here.
* time/bits/types/struct_tm.h: Define struct tm here.
* time/bits/types/time_t.h: Define time_t here.
* time/bits/types/timer_t.h: Define timer_t here.
* time/Makefile: Install the new headers.
* bits/resource.h, io/fcntl.h, io/sys/poll.h, io/sys/stat.h
* io/utime.h, misc/sys/select.h, posix/sched.h, posix/sys/times.h
* posix/sys/types.h, resolv/netdb.h, rt/aio.h, rt/mqueue.h
* signal/signal.h, pthread/semaphore.h, sysdeps/nptl/pthread.h
* sysdeps/unix/sysv/linux/alpha/bits/resource.h
* sysdeps/unix/sysv/linux/alpha/sys/acct.h
* sysdeps/unix/sysv/linux/bits/resource.h
* sysdeps/unix/sysv/linux/bits/timex.h
* sysdeps/unix/sysv/linux/mips/bits/resource.h
* sysdeps/unix/sysv/linux/net/ppp_defs.h
* sysdeps/unix/sysv/linux/sparc/bits/resource.h
* sysdeps/unix/sysv/linux/sys/acct.h
* sysdeps/unix/sysv/linux/sys/timerfd.h
* sysvipc/sys/msg.h, sysvipc/sys/sem.h, sysvipc/sys/shm.h
* time/sys/time.h, time/sys/timeb.h
Use the new bits/types headers.
* include/time.h: Remove __need logic.
* include/bits/time.h
* include/bits/types/clock_t.h, include/bits/types/clockid_t.h
* include/bits/types/time_t.h, include/bits/types/timer_t.h
* include/bits/types/struct_itimerspec.h
* include/bits/types/struct_timespec.h
* include/bits/types/struct_timeval.h
* include/bits/types/struct_tm.h:
New wrapper headers.
Several network-related structures are defined conditionally under
__USE_MISC, but unconditionally used by other headers. The path of
least resistance is usually to condition the uses on __USE_MISC as
well.
* sysdeps/mach/hurd/net/if_ppp.h
* sysdeps/unix/sysv/linux/net/if_ppp.h:
Only define struct ifpppstatsreq and struct ifpppcstatsreq
if __USE_MISC is defined, to ensure struct ifreq is declared.
* inet/netinet/ether.h: Condition all function prototypes
on __USE_MISC, to ensure struct ether_addr is declared.
sys/socket.h defines struct osockaddr only under __USE_MISC, whereas
protocols/talkd.h requires it unconditionally. Here it doesn't make
sense to condition the entire body of protocols/talkd.h on __USE_MISC.
Rather than complicate sys/socket.h with a __need macro or duplicate
the definition, I am introducing a new concept: tiny headers named
bits/types/TYPE.h that define TYPE and nothing else. This can, I hope,
ultimately replace *all* the __need macros. The guard macro for such
headers will be __TYPE_defined, just in case application or third-party
library code is looking at them.
* socket/bits/types/struct_osockaddr.h: New header.
* include/bits/types/struct_osockaddr.h: New wrapper.
* socket/Makefile: Install the new header.
* socket/sys/socket.h, inet/protocols/talkd.h:
Refer to bits/types/struct_osockaddr.h for the definition of
struct osockaddr.
The types u_char, u_short, u_int, u_long, ushort, uint, ulong, u_int8_t,
u_int16_t, u_int32_t, u_int64_t, quad_t, and u_quad_t are BSDisms that
have never been standardized. While glibc should continue to *provide*
these types for compatibility's sake, its public headers should not
use them.
The meat of this change was mechanically generated by the following
shell command:
perl -pi~ -e '
s/\b(__)?u_char\b/unsigned char/g;
s/\b(__)?u_?short\b/unsigned short/g;
s/\b(__)?u_?int\b/unsigned int/g;
s/\b(__)?u_?long\b/unsigned long/g;
s/\b(__)?u_int8_t\b/uint8_t/g;
s/\b(__)?u_int16_t\b/uint16_t/g;
s/\b(__)?u_int32_t\b/uint32_t/g;
s/\b(__)?u_int64_t\b/uint64_t/g;
s/\b(__)?u_quad_t\b/uint64_t/g;
s/\b(__)?quad_t\b/uint64_t/g;
' $(grep -lE -e '\<((__)?(quad_t|u(short|int|long|_(char|short|int([0-9]+_t)?|long|quad_t))))\>' \
$(grep -LE '\<(_(SYS|BITS)_TYPES_H|rpc/(rpc|rpc_msg|types|xdr)\.h)\>' \
$(find . \( -false $(sed 's/^/-o -name /' all-installed-headers) \
\) -printf '%P\n' | sort -u)))
where 'all-installed-headers' was a list of the basenames of all installed
header files, manually extracted from the Makefiles. Non-installed
wrapper headers in include/ are also adjusted, for consistency.
I then manually fixed up indentation and line-wrapping.
sys/types.h and bits/types.h are excluded because they must continue
to define the u_* types (under __USE_MISC) for compatibility with
applications. They do not use these types themselves.
All headers that (transitively) include rpc/types.h are also excluded,
for three reasons. First, the u_* types are defined by rpc/types.h,
unconditionally (not just under __USE_MISC) so they are logically part
of the SunRPC API. Second, many of those headers appear to be
machine-generated. Third, it's my understanding that we are getting
rid of as much of SunRPC as possible in the near future.
(The one file under sunrpc/ that's touched, sunrpc/rpc/rpc_des.h, does
*not* include rpc/types.h. This may itself be a bug.)
After changing from u_intNN_t to uintNN_t, a number of headers now
need to include stdint.h to pick up those types. It might be more
hygenic, namespace-wise, to use __uintNN_t instead, but none of these
headers are bound by ISO or POSIX to do so, and it's unlikely that
anyone using them will be bothered. (The two files that were using
__-prefixed versions of the u_types, sysdeps/mach/hurd/net/route.h and
sysdeps/unix/sysv/linux/net/route.h, both already also contained uses of
the unprefixed versions.)
Some of these files directly included features.h and/or sys/cdefs.h,
which I removed, as the style generally seems to be to let sys/types.h
do that for us. (This does not change the set of definitions exposed
by any header; sys/types.h unconditionally includes both features.h
and sys/cdefs.h.)
One file included asm/types.h unnecessarily.
* bits/in.h, gmon/sys/gmon.h, inet/netinet/igmp.h
* inet/protocols/routed.h, inet/protocols/talkd.h
* inet/protocols/timed.h, io/fts.h, nptl_db/thread_db.h
* resolv/arpa/nameser.h, resolv/resolv.h, sunrpc/rpc/rpc_des.h
* sysdeps/generic/netinet/if_ether.h
* sysdeps/generic/netinet/in_systm.h
* sysdeps/generic/netinet/ip.h, sysdeps/generic/netinet/tcp.h
* sysdeps/gnu/netinet/ip_icmp.h, sysdeps/gnu/netinet/tcp.h
* sysdeps/gnu/netinet/udp.h, sysdeps/mach/hurd/net/ethernet.h
* sysdeps/mach/hurd/net/if_arp.h
* sysdeps/mach/hurd/net/if_ppp.h
* sysdeps/mach/hurd/net/route.h, sysdeps/mach/sys/reboot.h
* sysdeps/unix/sysv/linux/bits/in.h
* sysdeps/unix/sysv/linux/net/ethernet.h
* sysdeps/unix/sysv/linux/net/if_arp.h
* sysdeps/unix/sysv/linux/net/if_ppp.h
* sysdeps/unix/sysv/linux/net/if_shaper.h
* sysdeps/unix/sysv/linux/net/route.h
* sysdeps/unix/sysv/linux/netinet/if_ether.h
* sysdeps/unix/sysv/linux/netinet/if_fddi.h
* sysdeps/unix/sysv/linux/netinet/if_tr.h
* sysdeps/unix/sysv/linux/netipx/ipx.h
* sysdeps/unix/sysv/linux/sys/acct.h
* include/arpa/nameser.h, include/resolv.h:
Change all uses of u_char to unsigned char,
u_short and ushort to unsigned short, u_int and uint to unsigned int,
u_long and ulong to unsigned long, u_int8_t to uint8_t,
u_int16_t to uint16_t, u_int32_t to uint32_t, quad_t to int64_t,
and u_int64_t and u_quad_t to uint64_t.
* mach/sys/reboot.h: Remove two casts of integer literals
to the types they already have.
* bits/in.h: Correct error in description of IP_MULTICAST_LOOP.
* sysdeps/unix/sysv/linux/bits/in.h: Likewise.
* sysdeps/unix/sysv/linux/netinet/if_ether.h: Change a comment
from referring to 'unsigned char' to 'uint8_t' for consistency with
the macro definition below.
* gmon/sys/gmon.h, inet/netinet/igmp.h, inet/protocols/talkd.h
* io/fts.h, resolv/arpa/nameser.h, resolv/resolv.h
* sunrpc/rpc/rpc_des.h, sysdeps/generic/netinet/ip.h
* sysdeps/gnu/netinet/tcp.h, sysdeps/gnu/netinet/udp.h
* sysdeps/mach/hurd/net/if_ppp.h, sysdeps/unix/sysv/linux/net/if_ppp.h
* sysdeps/unix/sysv/linux/sys/acct.h
* include/arpa/nameser.h, include/resolv.h:
Fix indentation disrupted by mechanical edits.
* inet/protocols/talkd.h, resolv/arpa/nameser.h
* sysdeps/generic/netinet/in_systm.h
* sysdeps/gnu/netinet/ip_icmp.h, sysdeps/gnu/netinet/tcp.h
* sysdeps/gnu/netinet/udp.h
* sysdeps/unix/sysv/linux/net/ethernet.h
* sysdeps/unix/sysv/linux/net/if_arp.h
* sysdeps/unix/sysv/linux/net/if_ppp.h
* sysdeps/unix/sysv/linux/net/if_shaper.h
* sysdeps/unix/sysv/linux/netinet/if_fddi.h
* sysdeps/unix/sysv/linux/netinet/if_tr.h
* sysdeps/unix/sysv/linux/netipx/ipx.h
* sysdeps/unix/sysv/linux/sys/acct.h
Include stdint.h for uintNN_t definitions.
Don't include sys/cdefs.h, features.h, or asm/types.h directly.
