Most of these don't really matter as there was no dirty upper state
but we should generally avoid stray sse when its not needed.
The one case that really matters is in svml_d_tanh4_core_avx2.S:
blendvps %xmm0, %xmm8, %xmm7
When there was a dirty upper state.
Tested on x86_64-linux
Optimizations are:
1. Reduce code size (-112 bytes).
2. Remove redundant move instructions.
3. Slightly improve instruction selection/scheduling where
possible.
4. Prefer registers which get short instruction encoding.
5. Reduce rodata size (-4k+ rodata is shared with avx2).
Result is roughly a 15-16% speedup:
Function, New Time, Old Time, New / Old
_ZGVbN4v_tanhf, 3.158, 3.749, 0.842
Optimizations are:
1. Reduce code size (-81 bytes).
2. Remove redundant move instructions.
3. Slightly improve instruction selection/scheduling where
possible.
4. Prefer registers which get short instruction encoding.
5. Reduce rodata size (-32 bytes).
Result is roughly a 17-18% speedup:
Function, New Time, Old Time, New / Old
_ZGVdN8v_tanhf, 1.977, 2.402, 0.823
tanhf-avx2 and tanhf-sse4 use the same data tables so we can save
over 4kb using a shared datatable. This does increase the memory
footprint of the sse4 version (as now all the targets are 32 bytes
instead of 16), generally it seems worth the code size save.
NB: This patch doesn't do anything itself, it is setup for future
patches.
Optimizations are:
1. Reduce code size (-67 bytes).
2. Remove redundant move instructions.
3. Slightly improve instruction selection/scheduling where
possible.
4. Reduce rodata usage (-448 bytes).
Result is roughly a 14% speedup:
Function, New Time, Old Time, New / Old
_ZGVeN16v_tanhf, 0.649, 0.752, 0.863
Improvements are:
1. Reduce code size (-62 bytes).
2. Remove redundant move instructions.
3. Slightly improve instruction selection/scheduling where
possible.
4. Prefer registers which get short instruction encoding.
5. Reduce rodata usage (-16 bytes).
The throughput improvement is not significant as the port 0 bottleneck
is unavoidable.
Function, New Time, Old Time, New / Old
_ZGVbN4v_atanhf, 8.821, 8.903, 0.991
Improvements are:
1. Reduce code size (-60 bytes).
2. Remove redundant move instructions.
3. Slightly improve instruction selection/scheduling where
possible.
4. Prefer registers which get short instruction encoding.
5. Shrink rodata usage (-32 bytes).
The throughput improvement is not that significant (3-5%) as the
port 0 bottleneck is unavoidable.
Function, New Time, Old Time, New / Old
_ZGVdN8v_atanhf, 2.799, 2.923, 0.958
Improvements are:
1. Reduce code size (-64 bytes).
2. Remove redundant move instructions.
3. Slightly improve instruction selection/scheduling where
possible.
4. Reduce rodata size ([-128, -188] bytes).
The throughput improvement is not significant as the port 0 bottleneck
is unavoidable.
Function, New Time, Old Time, New / Old
_ZGVeN16v_atanhf, 1.39, 1.408, 0.987
The compiler may substitute calls to sin or cos with calls to sincos, thus
we should have the same optimized implementations for sincos. The
optimized implementations may produce results that differ, that also makes
sure that the sincos call aggrees with the sin and cos calls.
Both float, double, and _Float128 are assumed to be supported
(float and double already only uses builtins). Only long double
is parametrized due GCC bug 29253 which prevents its usage on
powerpc.
It allows to remove i686, ia64, x86_64, powerpc, and sparc arch
specific implementation.
On ia64 it also fixes the sNAN handling:
math/test-float64x-fabs
math/test-ldouble-fabs
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc-linux-gnu,
powerpc64-linux-gnu, sparc64-linux-gnu, and ia64-linux-gnu.
Improve libmvec benchmark integration so that in future other
architectures may be able to run their libmvec benchmarks as well. This
now allows libmvec benchmarks to be run with `make BENCHSET=bench-math`.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The libmvec benchmarks print a message indicating that a certain CPU
feature is unsupported and exit prematurelyi, which breaks the JSON in
bench.out.
Handle this more elegantly in the bench makefile target by adding
support for an UNSUPPORTED exit status (77) so that bench.out continues
to have output for valid tests.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
