_dl_tlsdesc_undefweak and _dl_tlsdesc_dynamic access the thread pointer
via the tcb field in TCB:
_dl_tlsdesc_undefweak:
_CET_ENDBR
movq 8(%rax), %rax
subq %fs:0, %rax
ret
_dl_tlsdesc_dynamic:
...
subq %fs:0, %rax
movq -8(%rsp), %rdi
ret
Since the tcb field in TCB is a pointer, %fs:0 is a 32-bit location,
not 64-bit. It should use "sub %fs:0, %RAX_LP" instead. Since
_dl_tlsdesc_undefweak returns ptrdiff_t and _dl_make_tlsdesc_dynamic
returns void *, RAX_LP is appropriate here for x32 and x86-64. This
fixes BZ #31185.
(cherry picked from commit 81be2a61da)
On x32, I got
FAIL: elf/tst-tlsgap
$ gdb elf/tst-tlsgap
...
open tst-tlsgap-mod1.so
Thread 2 "tst-tlsgap" received signal SIGSEGV, Segmentation fault.
[Switching to LWP 2268754]
_dl_tlsdesc_dynamic () at ../sysdeps/x86_64/dl-tlsdesc.S:108
108 movq (%rsi), %rax
(gdb) p/x $rsi
$4 = 0xf7dbf9005655fb18
(gdb)
This is caused by
_dl_tlsdesc_dynamic:
_CET_ENDBR
/* Preserve call-clobbered registers that we modify.
We need two scratch regs anyway. */
movq %rsi, -16(%rsp)
movq %fs:DTV_OFFSET, %rsi
Since the dtv field in TCB is a pointer, %fs:DTV_OFFSET is a 32-bit
location, not 64-bit. Load the dtv field to RSI_LP instead of rsi.
This fixes BZ #31184.
(cherry picked from commit 3502440397)
The string parsing routine may end up writing beyond bounds of tunestr
if the input tunable string is malformed, of the form name=name=val.
This gets processed twice, first as name=name=val and next as name=val,
resulting in tunestr being name=name=val:name=val, thus overflowing
tunestr.
Terminate the parsing loop at the first instance itself so that tunestr
does not overflow.
This also fixes up tst-env-setuid-tunables to actually handle failures
correct and add new tests to validate the fix for this CVE.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 1056e5b4c3)
V2 of this patch fixes an issue in V1, where the state was changed to ON not
OFF at end of _mcleanup. I hadn't noticed that (counterintuitively) ON=0 and
OFF=3, hence zeroing the buffer turned it back on. So set the state to OFF
after the memset.
1. Prevent double free, and reads from unallocated memory, when
_mcleanup is (incorrectly) called two or more times in a row,
without an intervening call to __monstartup; with this patch, the
second and subsequent calls effectively become no-ops instead.
While setting tos=NULL is minimal fix, safest action is to zero the
whole gmonparam buffer.
2. Prevent memory leak when __monstartup is (incorrectly) called two
or more times in a row, without an intervening call to _mcleanup;
with this patch, the second and subsequent calls effectively become
no-ops instead.
3. After _mcleanup, treat __moncontrol(1) as __moncontrol(0) instead.
With zeroing of gmonparam buffer in _mcleanup, this stops the
state incorrectly being changed to GMON_PROF_ON despite profiling
actually being off. If we'd just done the minimal fix to _mcleanup
of setting tos=NULL, there is risk of far worse memory corruption:
kcount would point to deallocated memory, and the __profil syscall
would make the kernel write profiling data into that memory,
which could have since been reallocated to something unrelated.
4. Ensure __moncontrol(0) still turns off profiling even in error
state. Otherwise, if mcount overflows and sets state to
GMON_PROF_ERROR, when _mcleanup calls __moncontrol(0), the __profil
syscall to disable profiling will not be invoked. _mcleanup will
free the buffer, but the kernel will still be writing profiling
data into it, potentially corrupted arbitrary memory.
Also adds a test case for (1). Issues (2)-(4) are not feasible to test.
Signed-off-by: Simon Kissane <skissane@gmail.com>
Reviewed-by: DJ Delorie <dj@redhat.com>
(cherry picked from commit bde1218720)
When mcount overflows, no gmon.out file is generated, but no message is printed
to the user, leaving the user with no idea why, and thinking maybe there is
some bug - which is how BZ 27576 ended up being logged. Print a message to
stderr in this case so the user knows what is going on.
As a comment in sys/gmon.h acknowledges, the hardcoded MAXARCS value is too
small for some large applications, including the test case in that BZ. Rather
than increase it, add tunables to enable MINARCS and MAXARCS to be overridden
at runtime (glibc.gmon.minarcs and glibc.gmon.maxarcs). So if a user gets the
mcount overflow error, they can try increasing maxarcs (they might need to
increase minarcs too if the heuristic is wrong in their case.)
Note setting minarcs/maxarcs too large can cause monstartup to fail with an
out of memory error. If you set them large enough, it can cause an integer
overflow in calculating the buffer size. I haven't done anything to defend
against that - it would not generally be a security vulnerability, since these
tunables will be ignored in suid/sgid programs (due to the SXID_ERASE default),
and if you can set GLIBC_TUNABLES in the environment of a process, you can take
it over anyway (LD_PRELOAD, LD_LIBRARY_PATH, etc). I thought about modifying
the code of monstartup to defend against integer overflows, but doing so is
complicated, and I realise the existing code is susceptible to them even prior
to this change (e.g. try passing a pathologically large highpc argument to
monstartup), so I decided just to leave that possibility in-place.
Add a test case which demonstrates mcount overflow and the tunables.
Document the new tunables in the manual.
Signed-off-by: Simon Kissane <skissane@gmail.com>
Reviewed-by: DJ Delorie <dj@redhat.com>
(cherry picked from commit 31be941e43)
The `__monstartup()` allocates a buffer used to store all the data
accumulated by the monitor.
The size of this buffer depends on the size of the internal structures
used and the address range for which the monitor is activated, as well
as on the maximum density of call instructions and/or callable functions
that could be potentially on a segment of executable code.
In particular a hash table of arcs is placed at the end of this buffer.
The size of this hash table is calculated in bytes as
p->fromssize = p->textsize / HASHFRACTION;
but actually should be
p->fromssize = ROUNDUP(p->textsize / HASHFRACTION, sizeof(*p->froms));
This results in writing beyond the end of the allocated buffer when an
added arc corresponds to a call near from the end of the monitored
address range, since `_mcount()` check the incoming caller address for
monitored range but not the intermediate result hash-like index that
uses to write into the table.
It should be noted that when the results are output to `gmon.out`, the
table is read to the last element calculated from the allocated size in
bytes, so the arcs stored outside the buffer boundary did not fall into
`gprof` for analysis. Thus this "feature" help me to found this bug
during working with https://sourceware.org/bugzilla/show_bug.cgi?id=29438
Just in case, I will explicitly note that the problem breaks the
`make test t=gmon/tst-gmon-dso` added for Bug 29438.
There, the arc of the `f3()` call disappears from the output, since in
the DSO case, the call to `f3` is located close to the end of the
monitored range.
Signed-off-by: Леонид Юрьев (Leonid Yuriev) <leo@yuriev.ru>
Another minor error seems a related typo in the calculation of
`kcountsize`, but since kcounts are smaller than froms, this is
actually to align the p->froms data.
Co-authored-by: DJ Delorie <dj@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 801af9fafd)
Fix bug that SIGCHLD is erroneously blocked forever in the following
scenario:
1. Thread A calls system but hasn't returned yet
2. Thread B calls another system but returns
SIGCHLD would be blocked forever in thread B after its system() returns,
even after the system() in thread A returns.
Although POSIX does not require, glibc system implementation aims to be
thread and cancellation safe. This bug was introduced in
5fb7fc9635 when we moved reverting signal
mask to happen when the last concurrently running system returns,
despite that signal mask is per thread. This commit reverts this logic
and adds a test.
Signed-off-by: Adam Yi <ayi@janestreet.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 436a604b7d)
The divss instruction clobbers its first argument, and the constraints
need to reflect that. Fortunately, with GCC 12, generated code does
not actually change, so there is no externally visible bug.
Suggested-by: Jakub Jelinek <jakub@redhat.com>
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
(cherry picked from commit 5d1ccdda7b)
Before this change, sgetsgent_r did not set errno to ERANGE, but
sgetsgent only check errno, not the return value from sgetsgent_r.
Consequently, sgetsgent did not detect any error, and reported
success to the caller, without initializing the struct sgrp object
whose address was returned.
This commit changes sgetsgent_r to set errno as well. This avoids
similar issues in applications which only change errno.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
(cherry picked from commit 969e9733c7)
The minimum non_temporal_threshold is 0x4040. non_temporal_threshold may
be set to less than the minimum value when the shared cache size isn't
available (e.g., in an emulator) or by the tunable. Add checks for
minimum and maximum of non_temporal_threshold.
This fixes BZ #29953.
(cherry picked from commit 48b74865c6)
The daylight variable is supposed to be set to 1 if DST is ever in
use for the current time zone. But __tzfile_read used to do this:
__daylight = rule_stdoff != rule_dstoff;
This check can fail to set __daylight to 1 if the DST and non-DST
offsets happen to be the same.
(cherry picked from commit 35141f304e)
Supports pcrel addressing of TLS GOT entry. Also tweak the non-pcrel
asm constraint to better reflect how the reg is used.
(cherry picked from commit 94628de778)
Although the nscd module is built with 64 bit time_t, the routines
linked direct to libc.so need to use the internal symbols.
Reviewed-by: DJ Delorie <dj@redhat.com>
(cherry picked from commit fa4a192778)
Old applications pass __IPC_64 as part of the command argument because
old glibc did not check for unknown commands, and passed through the
arguments directly to the kernel, without adding __IPC_64.
Applications need to continue doing that for old glibc compatibility,
so this commit enables this approach in current glibc.
For msgctl and shmctl, if no translation is required, make
direct system calls, as we did before the time64 changes. If
translation is required, mask __IPC_64 from the command argument.
For semctl, the union-in-vararg argument handling means that
translation is needed on all architectures.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 22a46dee24)
The 106ff08526 did not take in consideration the buffer might be
reallocated if the total path is larger than PATH_MAX. The realloc
uses 'dirbuf', where 'dirstreams' is the allocated buffer.
Checked on x86_64-linux-gnu.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
(cherry picked from commit 1836bb2ebf)
Copy regex-related files back from Gnulib, to fix a problem with
static checking of regex calls noted by Martin Sebor. This merges the
following changes:
* New macro __attribute_nonnull__ in misc/sys/cdefs.h, for use later
when copying other files back from Gnulib.
* Use __GNULIB_CDEFS instead of __GLIBC__ when deciding
whether to include bits/wordsize.h etc.
* Avoid duplicate entries in epsilon closure table.
* New regex.h macro _REGEX_NELTS to let regexec say that its pmatch
arg should contain nmatch elts. Use that for regexec, instead of
__attr_access (which is incorrect).
* New regex.h macro _Attr_access_ which is like __attr_access except
portable to non-glibc platforms.
* Add some DEBUG_ASSERTs to pacify gcc -fanalyzer and to catch
recently-fixed performance bugs if they recur.
* Add Gnulib-specific stuff to port the dynarray- and lock-using parts
of regex code to non-glibc platforms.
* Fix glibc bug 11053.
* Avoid some undefined behavior when popping an empty fail stack.
(cherry picked from commit 0b5ca7c3e5)
The generic Linux struct_stat misses the conditionals to use
bits/struct_stat_time64_helper.h in the __USE_TIME_BITS64 for
architecture that uses __TIMESIZE == 32 (currently csky and nios2).
Since newer ports should not support 32 bit time_t, the generic
implementation should be used as default.
For arm, hppa, and sh a copy of default struct_stat is added,
while for csky and nios a new one based on generic is used, along
with conditionals to use bits/struct_stat_time64_helper.h.
The default struct_stat is also replaced with the generic one.
Checked on aarch64-linux-gnu and arm-linux-gnueabihf.
(cherry picked from commit 7a6ca82f80)
The data in the _ns_debug member must be preserved, otherwise
_dl_debug_initialize enters an infinite loop. To be conservative,
only clear the libc_map member for now, to fix bug 29528.
Fixes commit d0e357ff45
("elf: Call __libc_early_init for reused namespaces (bug 29528)"),
by reverting most of it.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 2c42257314)
(Conflict in elf/dl-open.c due to missing _r_debug namespace support.)
getent implicitly passes AI_ADDRCONFIG to getaddrinfo by default.
Use --no-addrconfig to suppress that, so that both IPv4 and IPv6
lookups succeed even if the address family is not supported by the
host.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit c75d20b5b2)
The ahosts, ahostsv4, ahostsv6 commands unconditionally pass
AI_ADDRCONFIG to getaddrinfo, which is not always desired.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit a623f13adf)
Allocate the pointer arrays only at the end, when their sizes
are known. This addresses bug 29305.
Skip over invalid names instead of failing lookups. This partially
fixes bug 12154 (for gethostbyname, fixing getaddrinfo requires
different changes).
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
(cherry picked from commit d101d836e7)
It's possible that inode numbers are outside the 32-bit range.
The existing code only handles the in-libc case correctly, and
still uses the legacy interfaces when building iconv.
Suggested-by: Helge Deller <deller@gmx.de>
(cherry picked from commit f97905f246)
Processes cache network interface information such as whether IPv4 or IPv6
are enabled. This is only checked again if the "netlink timestamp" provided
by nscd changed, which is triggered by netlink socket activity.
However, in the epoll handler for the netlink socket, it was missed to
assign the new timestamp to the nscd database. The handler for plain poll
did that properly, copy that over.
This bug caused that e.g. processes which started before network
configuration got unusuable addresses from getaddrinfo, like IPv6 only even
though only IPv4 is available:
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/issues/1041
It's a bit hard to reproduce, so I verified this by checking the timestamp
on calls to __check_pf manually. Without this patch it's stuck at 1, now
it's increasing on network changes as expected.
Signed-off-by: Fabian Vogt <fvogt@suse.de>
(cherry picked from commit 02ca25fef2)
libc_map is never reset to NULL, neither during dlclose nor on a
dlopen call which reuses the namespace structure. As a result, if a
namespace is reused, its libc is not initialized properly. The most
visible result is a crash in the <ctype.h> functions.
To prevent similar bugs on namespace reuse from surfacing,
unconditionally initialize the chosen namespace to zero using memset.
(cherry picked from commit d0e357ff45)
The inline and library functions that the CMSG_NXTHDR macro may expand
to increment the pointer to the header before checking the stride of
the increment against available space. Since C only allows incrementing
pointers to one past the end of an array, the increment must be done
after a length check. This commit fixes that and includes a regression
test for CMSG_FIRSTHDR and CMSG_NXTHDR.
The Linux, Hurd, and generic headers are all changed.
Tested on Linux on armv7hl, i686, x86_64, aarch64, ppc64le, and s390x.
[BZ #28846]
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
(cherry picked from commit 9c443ac455)
The kernel special-cases the zero argument for alpha brk, and we can
use that to restore the generic Linux error handling behavior.
Fixes commit b57ab258c1 ("Linux:
Introduce __brk_call for invoking the brk system call").
(cherry picked from commit e7ad26ee3c)
Since ad43cac44a the generic code already shuffles the argv/envp/auxv
on the stack to remove the ld.so own arguments and thus _dl_skip_args
is always 0. So there is no need to adjust the argc or argv.
Checked with qemu-user that arguments are correctly passed on both
constructors and main program.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 4868ba5d25)
Different than other architectures, hppa creates an unrelated stack
frame where ld.so argc/argv adjustments done by ad43cac44a
is not done on the argc/argv saved/restore by _dl_start_user.
Instead load _dl_argc and _dl_argv directlty instead of adjust them
using _dl_skip_args value.
Checked on hppa-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 6242602273)
The issue is only when used within libc.so (iconvconfig already builds
with _TIME_SIZE=64).
This is a missing spot initially from 52a5fe70a2.
Checked on i686-linux-gnu.
(cherry picked from commit c789e6e409)
The AT_SYMLINK_NOFOLLOW emulation ues the default 32 bit stat internal
calls, which fails with EOVERFLOW if the file constains timestamps
beyond 2038.
Checked on i686-linux-gnu.
(cherry picked from commit 118a2aee07)
When audit modules are loaded, ld.so initialization is not yet
complete, and rtld_active () returns false even though ld.so is
mostly working. Instead, the static dlopen hook is used, but that
does not work at all because this is not a static dlopen situation.
Commit 466c1ea15f ("dlfcn: Rework
static dlopen hooks") moved the hook pointer into _rtld_global_ro,
which means that separate protection is not needed anymore and the
hook pointer can be checked directly.
The guard for disabling libio vtable hardening in _IO_vtable_check
should stay for now.
Fixes commit 8e1472d2c1 ("ld.so:
Examine GLRO to detect inactive loader [BZ #20204]").
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 8dcb6d0af0)
This is necessary to place the libio vtables into the RELRO segment.
New tests elf/tst-relro-ldso and elf/tst-relro-libc are added to
verify that this is what actually happens.
The new tests fail on ia64 due to lack of (default) RELRO support
inbutils, so they are XFAILed there.
(cherry picked from commit 198abcbb94)
