Use the generic C memset/memcpy/memmove in benchtests since comparing
against a slow byte-oriented implementation makes no sense.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2019-08-29 Wilco Dijkstra <wdijkstr@arm.com>
* benchtests/bench-memcpy.c (simple_memcpy): Remove.
(generic_memcpy): Include generic C memcpy.
* benchtests/bench-memmove.c (simple_memmove): Remove.
(generic_memmove): Include generic C memmove.
* benchtests/bench-memset.c (simple_memset): Remove.
(generic_memset): Include generic C memset.
* benchtests/bench-memset-large.c (simple_memset): Remove.
(generic_memset): Include generic C memset.
* benchtests/bench-memset-walk.c (simple_memset): Remove.
(generic_memset): Include generic C memset.
* string/memcpy.c (MEMCPY): Add defines to enable redirection.
* string/memset.c (MEMSET): Likewise.
* sysdeps/x86_64/memcopy.h: Remove empty file.
It doesn't make sense to remove all the internal uses of time.
It's still a standard ISO C function, and its callers don't need
sub-second resolution and would be unnecessarily complicated if
they had to declare a struct timespec instead of just a time_t.
However, a handful of places were using the vestigial "result"
argument instead of the return value, which is slightly less
efficient and also looks strange. Correct this.
* misc/syslog.c (__vsyslog_internal)
* time/getdate.c (__getdate_r)
* time/tst_wcsftime.c (main):
Use return value of time, not its argument.
* string/strfry.c (strfry)
* sysdeps/mach/sleep.c (__sleep):
Remove unnecessary casts of NULL in calls to time.
C2X adds the memccpy, strdup and strndup functions. This patch duly
adds __GLIBC_USE (ISOC2X) to the conditions under which <string.h>
declares them.
Tested for x86_64.
* string/string.h (memccpy): Also declare if [__GLIBC_USE (ISOC2X)].
(strdup): Likewise.
(strndup): Likewise.
This patch fixes the following gcc 9 warnings for "make xcheck" / "make bench":
-string/tst-strcasestr.c:
../include/bits/../../misc/bits/error.h:42:5: error: ‘%s’ directive argument is null [-Werror=format-overflow=]
-argp/argp-test.c:
argp-test.c:130:20: error: ‘%d’ directive writing between 1 and 11 bytes into a region of size 10 [-Werror=format-overflow=]
argp-test.c:130:19: note: directive argument in the range [-2147483648, 122]
argp-test.c:130:5: note: ‘sprintf’ output between 2 and 12 bytes into a destination of size 10
-nss/tst-field.c:
tst-field.c:52:7: error: ‘%s’ directive argument is null [-Werror=format-overflow=]
-benchtests/bench-strstr.c:
../include/bits/../../misc/bits/error.h:42:5: error: ‘%s’ directive argument is null [-Werror=format-overflow=]
-benchtests/bench-malloc-simple.c:
bench-malloc-simple.c:93:16: error: iteration 3 invokes undefined behavior [-Werror=aggressive-loop-optimizations]
ChangeLog:
[BZ #24556]
* string/test-strcasestr.c (check_result): Add NULL check.
* nss/tst-field.c (check_rewrite): Likewise.
* benchtests/bench-strstr.c (do_one_test): Likewise.
* string/test-strstr.c (check_result): Likewise.
* argp/argp-test.c (popt): Increase size of buf to 12.
* benchtests/bench-malloc-simple.c (bench):
Do not initialize tests array out of bounds.
This patch significantly improves performance of memmem using a novel
modified Horspool algorithm. Needles up to size 256 use a bad-character
table indexed by hashed pairs of characters to quickly skip past mismatches.
Long needles use a self-adapting filtering step to avoid comparing the whole
needle repeatedly.
By limiting the needle length to 256, the shift table only requires 8 bits
per entry, lowering preprocessing overhead and minimizing cache effects.
This limit also implies worst-case performance is linear.
Small needles up to size 2 use a dedicated linear search. Very long needles
use the Two-Way algorithm (to avoid increasing stack size or slowing down
the common case, inlining is disabled).
The performance gain is 6.6 times on English text on AArch64 using random
needles with average size 8.
Tested against GLIBC testsuite and randomized tests.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
* string/memmem.c (__memmem): Rewrite to improve performance.
This patch significantly improves performance of strstr using a novel
modified Horspool algorithm. Needles up to size 256 use a bad-character
table indexed by hashed pairs of characters to quickly skip past mismatches.
Long needles use a self-adapting filtering step to avoid comparing the whole
needle repeatedly.
By limiting the needle length to 256, the shift table only requires 8 bits
per entry, lowering preprocessing overhead and minimizing cache effects.
This limit also implies worst-case performance is linear.
Small needles up to size 3 use a dedicated linear search. Very long needles
use the Two-Way algorithm.
The performance gain using the improved bench-strstr on Cortex-A72 is 5.8
times basic_strstr and 3.7 times twoway_strstr.
Tested against GLIBC testsuite, randomized tests and the GNULIB strstr test
(https://git.savannah.gnu.org/cgit/gnulib.git/tree/tests/test-strstr.c).
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
* string/str-two-way.h (two_way_short_needle): Add inline to avoid
warning.
(two_way_long_needle): Block inlining.
* string/strstr.c (strstr2): Add new function.
(strstr3): Likewise.
(STRSTR): Completely rewrite strstr to improve performance.
Commit 1294b1892e ("Add support for sqrt asm redirects") added the
-fno-math-errno flag to build most of the glibc in order to enable GCC
to inline math functions. Due to GCC bug #88576, saving and restoring
errno around calls to malloc are optimized-out. In turn this causes
strerror to set errno to ENOMEM if it get passed an invalid error number
and if malloc sets errno to ENOMEM (which might happen even if it
succeeds). This is not allowed by POSIX.
This patch changes the build flags, building only libm with
-fno-math-errno and all the remaining code with -fno-math-errno. This
should be safe as libm doesn't contain any code saving and restoring
errno around malloc. This patch can probably be reverted once the GCC
bug is fixed and available in stable releases.
Tested on x86-64, no regression in the testsuite.
Changelog:
[BZ #24024]
* Makeconfig: Build libm with -fno-math-errno but build the remaining
code with -fmath-errno.
* string/Makefile [$(build-shared)] (tests): Add test-strerror-errno.
[$(build-shared)] (LDLIBS-test-strerror-errno): New variable.
* string/test-strerror-errno.c: New file.
The generic strstr in GLIBC 2.28 fails to match huge needles. The optimized
AVAILABLE macro reads ahead a large fixed amount to reduce the overhead of
repeatedly checking for the end of the string. However if the needle length
is larger than this, two_way_long_needle may confuse this as meaning the end
of the string and return NULL. This is fixed by adding the needle length to
the amount to read ahead.
[BZ #23637]
* string/test-strstr.c (pr23637): New function.
(test_main): Add tests with longer needles.
* string/strcasestr.c (AVAILABLE): Fix readahead distance.
* string/strstr.c (AVAILABLE): Likewise.
As done in commit 284f42bc77, memcmp
can be used after memchr to avoid the initialization overhead of the
two-way algorithm for the first match. This has shown improvement
>40% for first match.
Looking at the benchtests, both strstr and strcasestr spend a lot of time
in a slow initialization loop handling one character per iteration.
This can be simplified and use the much faster strlen/strnlen/strchr/memcmp.
Read ahead a few cachelines to reduce the number of strnlen calls, which
improves performance by ~3-4%. This patch improves the time taken for the
full strstr benchtest by >40%.
* string/strcasestr.c (STRCASESTR): Simplify and speedup first match.
* string/strstr.c (AVAILABLE): Likewise.
On s390x, the test string/tst-xbzero-opt is failing if build with gcc head:
FAIL: no clear/prepare: expected 32 got 0
FAIL: no clear/test: expected some got 0
FAIL: ordinary clear/prepare: expected 32 got 0
INFO: ordinary clear/test: found 0 patterns (memset not eliminated)
PASS: explicit clear/prepare: expected 32 got 32
PASS: explicit clear/test: expected 0 got 0
In setup_no_clear / setup_ordinary_clear, GCC is omitting the memcpy loop
in prepare_test_buffer. Thus count_test_patterns does not find any of the
test_pattern.
This patch calls use_test_buffer in order to force the compiler to really copy
the pattern to buf.
ChangeLog:
* string/tst-xbzero-opt.c (use_test_buffer): New function.
(prepare_test_buffer): Call use_test_buffer as compiler barrier.
Add <bits/indirect-return.h> and include it in <ucontext.h>.
__INDIRECT_RETURN defined in <bits/indirect-return.h> indicates if
swapcontext requires special compiler treatment. The default
__INDIRECT_RETURN is empty.
On x86, when shadow stack is enabled, __INDIRECT_RETURN is defined
with indirect_return attribute, which has been added to GCC 9, to
indicate that swapcontext returns via indirect branch. Otherwise
__INDIRECT_RETURN is defined with returns_twice attribute.
When shadow stack is enabled, remove always_inline attribute from
prepare_test_buffer in string/tst-xbzero-opt.c to avoid:
tst-xbzero-opt.c: In function ‘prepare_test_buffer’:
tst-xbzero-opt.c:105:1: error: function ‘prepare_test_buffer’ can never be inlined because it uses setjmp
prepare_test_buffer (unsigned char *buf)
when indirect_return attribute isn't available.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* bits/indirect-return.h: New file.
* misc/sys/cdefs.h (__glibc_has_attribute): New.
* sysdeps/x86/bits/indirect-return.h: Likewise.
* stdlib/Makefile (headers): Add bits/indirect-return.h.
* stdlib/ucontext.h: Include <bits/indirect-return.h>.
(swapcontext): Add __INDIRECT_RETURN.
* string/tst-xbzero-opt.c (ALWAYS_INLINE): New.
(prepare_test_buffer): Use it.
Improve strstr performance. Strstr tends to be slow because it uses
many calls to memchr and a slow byte loop to scan for the next match.
Performance is significantly improved by using strnlen on larger blocks
and using strchr to search for the next matching character. strcasestr
can also use strnlen to scan ahead, and memmem can use memchr to check
for the next match.
On the GLIBC bench tests the performance gains on Cortex-A72 are:
strstr: +25%
strcasestr: +4.3%
memmem: +18%
On a 256KB dataset strstr performance improves by 67%, strcasestr by 47%.
Reviewd-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The __libc_freeres framework does not extend to non-libc.so objects.
This causes problems in general for valgrind and mtrace detecting
unfreed objects in both libdl.so and libpthread.so. This change is
a pre-requisite to properly moving the malloc hooks out of malloc
since such a move now requires precise accounting of all allocated
data before destructors are run.
This commit adds a proper hook in libc.so.6 for both libdl.so and
for libpthread.so, this ensures that shm-directory.c which uses
freeit () to free memory is called properly. We also remove the
nptl_freeres hook and fall back to using weak-ref-and-check idiom
for a loaded libpthread.so, thus making this process similar for
all DSOs.
Lastly we follow best practice and use explicit free calls for
both libdl.so and libpthread.so instead of the generic hook process
which has undefined order.
Tested on x86_64 with no regressions.
Signed-off-by: DJ Delorie <dj@redhat.com>
Signed-off-by: Carlos O'Donell <carlos@redhat.com>
Building the testsuite with GCC mainline fails with
-Wstringop-overflow= errors in string/tst-cmp.c. These are for calls
to strncmp and strncasecmp with SIZE_MAX size argument. The tests are
deliberately using this size that would be dubious in normal code, so
this patch disables the warning for the calls in question.
Tested with build-many-glibcs.py for aarch64-linux-gnu.
* string/tst-cmp.c: Include <libc-diag.h>.
(strncmp_max): Disable -Wstringop-overflow= around call to
strncmp.
(strncasecmp_max): Disable -Wstringop-overflow= around call to
strncasecmp.
Building the testsuite with GCC mainline fails with:
bug-strspn1.c: In function 'main':
bug-strspn1.c:14:3: error: right-hand operand of comma expression has no effect [-Werror=unused-value]
strspn (b++, "");
^~~~~~~~~~~~~~~~
and a similar error for bug-strpbrk1.c. I'm not sure what GCC change
introduced this, and the wording of the message is a bit off (in the
source it's not a comma expression, that must reflect GCC's IR). But
the warning is correct (strspn is a pure function, the call is
useless, and if there wasn't an argument with a side effect much older
GCC would have warned); the point of the test is to verify that the
side effect in an argument still occurs for this useless call that can
otherwise be optimized to an (unused) constant (testing for a bug
there once was in an old strspn macro). This patch duly arranges for
the warning to be disabled for this code.
Tested with build-many-glibcs.py for aarch64-linux-gnu.
* string/bug-strpbrk1.c: Include <libc-diag.h>.
(main): Disable -Wunused-value around call to strpbrk.
* string/bug-strspn1.c: Include <libc-diag.h>.
(main): Disable -Wunused-value around call to strspn.
With current GCC mainline, one strncat test involving a size close to
SIZE_MAX results in a -Wrestrict warning that that buffer size would
imply that the two buffers must overlap. This patch fixes the build
by adding disabling of -Wrestrict (for GCC versions supporting that
option) to the already-present disabling of -Wstringop-overflow= and
-Warray-bounds for this test.
Tested with build-many-glibcs.py that this restores the testsuite
build with GCC mainline for aarch64-linux-gnu.
* string/tester.c (test_strncat) [__GNUC_PREREQ (7, 0)]: Also
ignore -Wrestrict for one test.
While there are now clean -Os build and test results on x86_64 (given
my patch <https://sourceware.org/ml/libc-alpha/2018-02/msg00602.html>,
pending review), testing with -Os with build-many-glibcs.py shows the
build is still failing with -Os everywhere except for x86_64, x86 and
s390x.
There are a variety of different build failures, but the most common
seem to be in strcoll / wcscoll, similar to existing such cases where
DIAG_* are used to disable -Wmaybe-uninitialized. There are various
different failures even within those functions. This patch fixes one
particular case that seems quite common, where the warning appears at
the declarations of seq1 and seq2.
Tested with build-many-glibcs.py that this fixes the -Os build for
aarch64-linux-gnu with GCC 7.
* string/strcoll_l.c: Include <libc-diag.h>.
(STRCOLL): Ignore -Wmaybe-uninitialized for -Os around
declarations of seq1 and seq2.
Among other localplt test failures when building with -Os, there are
libc.so PLT references for argz_next and __argz_next. This is a
simple case of functions that are inlined for -O2 but not for -Os;
this patch adds libc_hidden_proto / libc_hidden_def for them to avoid
localplt failures even when not inlined.
Tested for x86_64 (both that it removes these particular localplt
failures for -Os - but other such failures remain so the bug can't yet
be closed - and that the testsuite continues to pass without -Os).
[BZ #15105]
* include/argz.h (argz_next): Use libc_hidden_proto.
(__argz_next): Likewise.
* string-argz-next.c (__argz_next): Use libc_hidden_def.
(argz_next): Use libc_hidden_weak.
We have a general principle of preferring optimizations for library
facilities to use compiler built-in functions rather than being
located in library headers, where the compiler can reasonably optimize
code without needing to know glibc implementation details.
This patch applies this principle to bits/byteswap.h, eliminating all
the architecture-specific variants and bits/byteswap-16.h. The
__bswap_16, __bswap_32 and __bswap_64 interfaces all become inline
functions, never macros, using the GCC built-in functions where
available and otherwise a single architecture-independent definition
using shifts and masking (which compilers may well be able to detect
and optimize; GCC has detection of various byte-swapping idioms).
The __bswap_constant_32 macro needs to stay around because of uses in
static initializers within glibc and its tests, and so for consistency
all __bswap_constant_* are kept rather than just being inlined into
the old-GCC-or-non-GCC parts of the __bswap_* inline function
definitions.
Various open bugs are addressed by this cleanup, with caveats about
exactly what is covered by those bugs and when the bugs applied at
all.
Bug 14508 reports -Wformat warnings building glibc because __bswap_*
sometimes returned the wrong types. Obviously we already don't have
such warnings any more or the build would be failing, given -Werror,
and I suspect that bug was originally for wrong types for x86_64, as
fixed by commit d394eb742a (glibc 2.17).
The only case I saw removed by this patch where the types would still
have been wrong was the non-__GNUC__ case of __bswap_64 in the s390
header (using unsigned long long int, but uint64_t would be unsigned
long int for 64-bit). In any case, the single header consistently
uses __uintN_t types after this patch, thereby eliminating all such
bugs. The existing string/test-endian-types.c test already suffices
to verify that the types are correct with the compiler used to build
glibc and its tests.
Bug 15512 reports an error from __bswap_constant_16 with -Werror
-Wsign-conversion. I am unable to reproduce this with any GCC version
supporting -Wsign-conversion - all seem to be able to avoid warning
for ((x) >> 8) & 0xffu, where x is uint16_t, which while it formally
does involve an implicit conversion from int to unsigned int, is also
a case where it should be easy for the compiler to see that the value
converted is never negative. But in this patch __bswap_constant_16 is
changed to use signed 0xff so that no such implicit conversion occurs
at all, and a test with -Werror -Wsign-conversion is added.
Bug 17082 objects to the use of ({}) statement expressions in these
macros preventing use at file scope (in C, that's in sizeof etc.; in
C++, more generally in static initializers). The particular case of
these interfaces is fixed by this patch as it changes them to inline
functions, eliminating all uses of ({}) in bits/byteswap.h, and a
corresponding testcase is added. The bug tries to raise a more
general policy question about use of ({}) in macros in installed
headers, referring to "many other libc functions" (unspecified which
functions are being considered).
Since such policy questions belong on libc-alpha, and since there
*are* macros in installed headers which can't really avoid using ({})
(where they are type-generic, so can't use an inline function, but
need a temporary variable, and a few where the interface involves
returning memory from alloca so can't use an inline function either),
I propose to consider that bug fixed with this change. That is
without prejudice to any other new bugs anyone wishes to file *for
precisely defined sets of macros* requesting moving away from ({})
*where it is clearly possible for those interfaces*. Where ({}) can
be avoided, typically by use of an inline function, I think that's a
good idea - that inline functions are typically to be preferred to
({}) for header interfaces where such optimizations are useful but the
interface is suited to being defined using an inline function.
Bug 20530 requests use of __builtin_bswap16 when available (GCC 4.8
and later), which this patch implements.
Tested for x86_64, and with build-many-glibcs.py. Also did an x86_64
test with the __GNUC_PREREQ conditionals changed to "#if 0" to verify
the old-GCC/non-GCC case in the headers. (There are already existing
tests for correctness of results of these interfaces.)
[BZ #14508]
[BZ #15512]
[BZ #17082]
[BZ #20530]
* bits/byteswap.h: Update file comment. Do not include
<bits/byteswap-16.h>.
(__bswap_constant_16): Cast result to __uint16_t. Use signed 0xff
constant.
(__bswap_16): Define as inline function.
(__bswap_constant_32): Reformat definition.
(__bswap_32): Always define as inline function, not macro, using
__uint32_t. Use __builtin_bswap32 if [__GNUC_PREREQ (4, 3)],
otherwise __bswap_constant_32.
(__bswap_constant_64): Reformat definition. Do not use
__extension__ here.
(__bswap_64): Always define as inline function, not macro. Use
__extension__ on function definition. Use __builtin_bswap64 if
[__GNUC_PREREQ (4, 3)], otherwise __bswap_constant_64.
* string/test-endian-file-scope.c: New file.
* string/test-endian-sign-conversion.c: Likewise.
* string/Makefile (headers): Remove bits/byteswap-16.h.
(tests): Add test-endian-file-scope and
test-endian-sign-conversion.
(CFLAGS-test-endian-sign-conversion.c): New variable.
* bits/byteswap-16.h: Remove file.
* sysdeps/ia64/bits/byteswap-16.h: Likewise.
* sysdeps/ia64/bits/byteswap.h: Likewise.
* sysdeps/m68k/bits/byteswap.h: Likewise.
* sysdeps/s390/bits/byteswap-16.h: Likewise.
* sysdeps/s390/bits/byteswap.h: Likewise.
* sysdeps/tile/bits/byteswap.h: Likewise.
* sysdeps/x86/bits/byteswap-16.h: Likewise.
* sysdeps/x86/bits/byteswap.h: Likewise.
Bug 19667 reports unchecked malloc calls in the test
string/testcopy.c. This patch makes that test use xmalloc and the
support/test-driver.c test framework.
Tested for x86_64.
[BZ #19667]
* string/testcopy.c: Include <support/support.h>. Do not include
<malloc.h>. Use <support/test-driver.c>.
(main): Rename to do_test. Make static. Use xmalloc instead of
malloc.
Some strncat tests fail to build with GCC 8 because of -Warray-bounds
warnings. These tests are deliberately test over-large size arguments
passed to strncat, and already disable -Wstringop-overflow warnings,
but now the warnings for these tests come under -Warray-bounds so that
option needs disabling for them as well, which this patch does (with
an update on the comments; the DIAG_IGNORE_NEEDS_COMMENT call for
-Warray-bounds doesn't need to be conditional itself, because that
option is supported by all versions of GCC that can build glibc).
Tested compilation with build-many-glibcs.py for aarch64-linux-gnu.
* string/tester.c (test_strncat): Also disable -Warray-bounds
warnings for two tests.
GCC 8 warns about more cases of string functions truncating their
output or not copying a trailing NUL byte.
This patch fixes testsuite build failures caused by such warnings in
string/tester.c. In general, the warnings are disabled around the
relevant calls using DIAG_* macros, since the relevant cases are being
deliberately tested. In one case, the warning is with
-Wstringop-overflow= instead of -Wstringop-truncation; in that case,
the conditional is __GNUC_PREREQ (7, 0) (being the version where
-Wstringop-overflow= was introduced), to allow the conditional to be
removed sooner, since it's harmless to disable the warning for a
GCC version where it doesn't actually occur. In the case of warnings
for strncpy calls in test_memcmp, the calls in question are changed to
use memcpy, as they don't copy a trailing NUL and the point of that
code is to test memcmp rather than strncpy.
Tested (compilation) with GCC 8 for x86_64-linux-gnu with
build-many-glibcs.py (in conjunction with Martin's patch to allow
glibc to build).
* string/tester.c (test_stpncpy): Disable -Wstringop-truncation
for stpncpy calls for GCC 8.
(test_strncat): Disable -Wstringop-truncation warning for strncat
calls for GCC 8. Disable -Wstringop-overflow= warning for one
strncat call for GCC 7.
(test_strncpy): Disable -Wstringop-truncation warning for strncpy
calls for GCC 8.
(test_memcmp): Use memcpy instead of strncpy for calls not copying
trailing NUL.
GCC 8 warns about strncat calls with truncated output.
string/bug-strncat1.c tests such a call; this patch disables the
warning for it.
Tested (compilation) with GCC 8 for x86_64-linux-gnu with
build-many-glibcs.py (in conjunction with Martin's patch to allow
glibc to build).
* string/bug-strncat1.c: Include <libc-diag.h>.
(main): Disable -Wstringop-truncation for strncat call for GCC 8.
Hide internal __strsep function to allow direct access within libc.so and
libc.a without using GOT nor PLT.
[BZ #18822]
* include/string.h (__strsep): Add libc_hidden_proto.
* string/strsep.c (__strsep): Add libc_hidden_def.
Fix GCC 7 errors when string/stratcliff.c is compiled with -O3:
stratcliff.c: In function ‘do_test’:
cc1: error: assuming signed overflow does not occur when assuming that (X - c) <= X is always true [-Werror=strict-overflow]
[BZ #21982]
* string/stratcliff.c (do_test): Declare size, nchars, inner,
middle and outer with size_t instead of int. Repleace %d and
%Zd with %zu in printf. Update "MAX (0, nchars - 128)" and
"MAX (outer, nchars - 64)" to support unsigned outer and
nchars. Also exit loop when outer == 0.
Move internal argz function prototypes to include/argz.h and mark them
with attribute_hidden to allow direct access within libc.so and libc.a
without using GOT nor PLT. This also brings string/argz.h closer to the
gnulib version.
[BZ #18822]
* include/argz.h (__argz_create_sep): New function prototype.
(__argz_append): Likewise.
(__argz_add): Likewise.
(__argz_add_sep): Likewise.
(__argz_delete): Likewise.
(__argz_insert): Likewise.
(__argz_replace): Likewise.
* string/argz.h (__argz_create_sep): Removed.
(__argz_append): Likewise.
(__argz_add): Likewise.
(__argz_add_sep): Likewise.
(__argz_delete): Likewise.
(__argz_insert): Likewise.
(__argz_replace): Likewise.
This patch increases the timeouts for some tests that I've seen timing
out on slow systems in my 2.26 release testing. (In the case of
tst-tsearch.c, increasing the timeout means removing a setting of 10
that was put there before the default timeout was increased to 20
seconds, so putting the default into effect.)
* iconvdata/tst-loading.c (TIMEOUT): Define to 30.
* misc/tst-tsearch.c (TIMEOUT): Remove.
* nptl/tst-create-detached.c (TIMEOUT): Define to 100.
* nptl/tst-robust-fork.c (TIMEOUT): Likewise.
* nptl/tst-rwlock19.c (TIMEOUT): Likewise.
* string/tst-cmp.c (TIMEOUT): Define to 600.
This code:
L(between_2_3):
/* Load as big endian with overlapping loads and bswap to avoid
branches. */
movzwl -2(%rdi, %rdx), %eax
movzwl -2(%rsi, %rdx), %ecx
shll $16, %eax
shll $16, %ecx
movzwl (%rdi), %edi
movzwl (%rsi), %esi
orl %edi, %eax
orl %esi, %ecx
bswap %eax
bswap %ecx
subl %ecx, %eax
ret
needs a saturating subtract because the full register is used.
With this commit, only the lower 24 bits of the register are used,
so a regular subtraction suffices.
The test case change adds coverage for these kinds of bugs.
<locale.h> is specified to define locale_t in POSIX.1-2008, and so are
all of the headers that define functions that take locale_t arguments.
Under _GNU_SOURCE, the additional headers that define such functions
have also always defined locale_t. Therefore, there is no need to use
__locale_t in public function prototypes, nor in any internal code.
* ctype/ctype-c99_l.c, ctype/ctype.h, ctype/ctype_l.c
* include/monetary.h, include/stdlib.h, include/time.h
* include/wchar.h, locale/duplocale.c, locale/freelocale.c
* locale/global-locale.c, locale/langinfo.h, locale/locale.h
* locale/localeinfo.h, locale/newlocale.c
* locale/nl_langinfo_l.c, locale/uselocale.c
* localedata/bug-usesetlocale.c, localedata/tst-xlocale2.c
* stdio-common/vfscanf.c, stdlib/monetary.h, stdlib/stdlib.h
* stdlib/strfmon_l.c, stdlib/strtod_l.c, stdlib/strtof_l.c
* stdlib/strtol.c, stdlib/strtol_l.c, stdlib/strtold_l.c
* stdlib/strtoll_l.c, stdlib/strtoul_l.c, stdlib/strtoull_l.c
* string/strcasecmp.c, string/strcoll_l.c, string/string.h
* string/strings.h, string/strncase.c, string/strxfrm_l.c
* sysdeps/ieee754/float128/strtof128_l.c
* sysdeps/ieee754/float128/wcstof128.c
* sysdeps/ieee754/float128/wcstof128_l.c
* sysdeps/ieee754/ldbl-128ibm/strtold_l.c
* sysdeps/ieee754/ldbl-64-128/strtold_l.c
* sysdeps/ieee754/ldbl-opt/nldbl-compat.c
* sysdeps/ieee754/ldbl-opt/nldbl-strfmon_l.c
* sysdeps/ieee754/ldbl-opt/nldbl-strtold_l.c
* sysdeps/ieee754/ldbl-opt/nldbl-wcstold_l.c
* sysdeps/powerpc/powerpc32/power7/strcasecmp.S
* sysdeps/powerpc/powerpc64/power7/strcasecmp.S
* sysdeps/x86_64/strcasecmp_l-nonascii.c
* sysdeps/x86_64/strncase_l-nonascii.c, time/strftime_l.c
* time/strptime_l.c, time/time.h, wcsmbs/mbsrtowcs_l.c
* wcsmbs/wchar.h, wcsmbs/wcscasecmp.c, wcsmbs/wcsncase.c
* wcsmbs/wcstod.c, wcsmbs/wcstod_l.c, wcsmbs/wcstof.c
* wcsmbs/wcstof_l.c, wcsmbs/wcstol_l.c, wcsmbs/wcstold.c
* wcsmbs/wcstold_l.c, wcsmbs/wcstoll_l.c, wcsmbs/wcstoul_l.c
* wcsmbs/wcstoull_l.c, wctype/iswctype_l.c
* wctype/towctrans_l.c, wctype/wcfuncs_l.c
* wctype/wctrans_l.c, wctype/wctype.h, wctype/wctype_l.c:
Change all uses of __locale_t to locale_t.
xlocale.h is already a single-type micro-header, defining struct
__locale_struct and the typedefs __locale_t and locale_t. This patch
brings it into the bits/types/ scheme: there are now
bits/types/__locale_t.h which defines only __locale_struct and
__locale_t, and bits/types/locale_t.h which defines locale_t as well
as the other two. None of *our* headers need __locale_t.h, but it
appears to me that libstdc++ could make use of it.
There are a lot of external uses of xlocale.h, but all the uses I
checked had an autoconf test or equivalent for its existence. It has
never been available from other C libraries, and it has always
contained a comment reading "This file is not standardized, don't rely
on it, it can go away without warning" so I think dropping it is
pretty safe.
I also took the opportunity to clean up comments in various public
header files that still talk about the *_l interfaces as though they
were completely nonstandard. There are a few of them, notably the
strtoX_l and wcstoX_l families, that haven't been standardized, but
the bulk are in POSIX.1-2008.
* locale/xlocale.h: Rename to...
* locale/bits/types/__locale_t.h: ...here. Adjust commentary.
Only define struct __locale_struct and __locale_t, not locale_t.
* locale/bits/types/locale_t.h: New file; define locale_t here.
* locale/Makefile (headers): Update to match.
* include/xlocale.h: Delete wrapper.
* include/bits/types/__locale_t.h: New wrapper.
* include/bits/types/locale_t.h: New wrapper.
* ctype/ctype.h, include/printf.h, include/time.h
* locale/langinfo.h, locale/locale.h, stdlib/monetary.h
* stdlib/stdlib.h, string/string.h, string/strings.h, time/time.h
* wcsmbs/wchar.h, wctype/wctype.h: Use bits/types/locale_t.h.
Correct outdated comments regarding the standardization status of
the functions that take locale_t arguments.
* stdlib/strtod_l.c, stdlib/strtof_l.c, stdlib/strtol_l.c
* stdlib/strtold_l.c, stdlib/strtoul_l.c, stdlib/strtoull_l.c
* sysdeps/ieee754/ldbl-128ibm/strtold_l.c
* sysdeps/ieee754/ldbl-64-128/strtold_l.c
* wcsmbs/wcstod.c, wcsmbs/wcstod_l.c, wcsmbs/wcstof.c
* wcsmbs/wcstof_l.c, wcsmbs/wcstold.c, wcsmbs/wcstold_l.c:
Don't include xlocale.h. If necessary, include locale.h instead.
* stdlib/strtold_l.c: Unconditionally include wchar.h.
Remove one more string inline that was defined directly in string.h;
in the absence of the rest of the inlines, it broke the build.
Like other ifunc shims for these functions,
x86_64/multiarch/{mem,st}pcpy.c need to define __NO_STRING_INLINES and
NO_MEMPCPY_STPCPY_REDIRECT.
* string/string.h (__mempcpy_inline): Delete.
* sysdeps/x86_64/multiarch/mempcpy.c
* sysdeps/x86_64/multiarch/stpcpy.c:
Define NO_MEMPCPY_STPCPY_REDIRECT and __NO_STRING_INLINES
before including string.h.
These machine-dependent inline string functions have never been on by
default, and even if they were a good idea at the time they were
introduced, they haven't really been touched in ten to fifteen years
and probably aren't a good idea on current-gen processors. Current
thinking is that this class of optimization is best left to the
compiler.
* bits/string.h, string/bits/string.h
* sysdeps/aarch64/bits/string.h
* sysdeps/m68k/m680x0/m68020/bits/string.h
* sysdeps/s390/bits/string.h, sysdeps/sparc/bits/string.h
* sysdeps/x86/bits/string.h: Delete file.
* string/string.h: Don't include bits/string.h.
* string/bits/string3.h: Rename to bits/string_fortified.h.
No need to undef various symbols that the removed headers
might have defined as macros.
* string/Makefile (headers): Remove bits/string.h, change
bits/string3.h to bits/string_fortified.h.
* string/string-inlines.c: Update commentary. Remove definitions
of various macros that nothing looks at anymore. Don't directly
include bits/string.h. Set _STRING_INLINE_unaligned here, based on
compiler-predefined macros.
* string/strncat.c: If STRNCAT is not defined, or STRNCAT_PRIMARY
_is_ defined, provide internal hidden alias __strncat.
* include/string.h: Declare internal hidden alias __strncat.
Only forward __stpcpy to __builtin_stpcpy if __NO_STRING_INLINES is
not defined.
* include/bits/string3.h: Rename to bits/string_fortified.h,
update to match above.
* sysdeps/i386/string-inlines.c: Define compat symbols for
everything formerly defined by sysdeps/x86/bits/string.h.
Make existing definitions into compat symbols as well.
Remove some no-longer-necessary messing around with macros.
* sysdeps/powerpc/powerpc32/power4/multiarch/mempcpy.c
* sysdeps/powerpc/powerpc64/multiarch/mempcpy.c
* sysdeps/powerpc/powerpc64/multiarch/stpcpy.c
* sysdeps/s390/multiarch/mempcpy.c
No need to define _HAVE_STRING_ARCH_mempcpy.
Do define __NO_STRING_INLINES and NO_MEMPCPY_STPCPY_REDIRECT.
* sysdeps/i386/i686/multiarch/strncat-c.c
* sysdeps/s390/multiarch/strncat-c.c
* sysdeps/x86_64/multiarch/strncat-c.c
Define STRNCAT_PRIMARY. Don't change definition of libc_hidden_def.
This is fairly complicated, not because the users of __need_Emath and
__need_error_t have complicated requirements, but because the core
changes had a lot of fallout.
__need_error_t exists for gnulib compatibility in argz.h and argp.h.
error_t itself is a Hurdism, an enum containing all the E-constants,
so you can do 'p (error_t) errno' in gdb and get a symbolic value.
argz.h and argp.h use it for function return values, and they want to
fall back to 'int' when that's not available. There is no reason why
these nonstandard headers cannot just go ahead and include all of
errno.h; so we do that.
__need_Emath is defined only by .S files; what they _really_ need is
for errno.h to avoid declaring anything other than the E-constants
(e.g. 'extern int __errno_location(void);' is a syntax error in
assembly language). This is replaced with a check for __ASSEMBLER__ in
errno.h, plus a carefully documented requirement for bits/errno.h not
to define anything other than macros. That in turn has the
consequence that bits/errno.h must not define errno - fortunately, all
live ports use the same definition of errno, so I've moved it to
errno.h. The Hurd bits/errno.h must also take care not to define
error_t when __ASSEMBLER__ is defined, which involves repeating all of
the definitions twice, but it's a generated file so that's okay.
* stdlib/errno.h: Remove __need_Emath and __need_error_t logic.
Reorganize file. Declare errno here. When __ASSEMBLER__ is
defined, don't declare anything other than the E-constants.
* include/errno.h: Change conditional for exposing internal
declarations to (not _ISOMAC and not __ASSEMBLER__).
* bits/errno.h: Remove logic for __need_Emath. Document
requirements for a port-specific bits/errno.h.
* sysdeps/unix/sysv/linux/bits/errno.h
* sysdeps/unix/sysv/linux/alpha/bits/errno.h
* sysdeps/unix/sysv/linux/hppa/bits/errno.h
* sysdeps/unix/sysv/linux/mips/bits/errno.h
* sysdeps/unix/sysv/linux/sparc/bits/errno.h:
Add multiple-include guard and check against improper inclusion.
Remove __need_Emath logic. Don't declare errno here. Ensure all
constants are defined as simple integer literals. Consistent
formatting.
* sysdeps/mach/hurd/errnos.awk: Likewise. Only define error_t and
enum __error_t_codes if __ASSEMBLER__ is not defined.
* sysdeps/mach/hurd/bits/errno.h: Regenerate.
* argp/argp.h, string/argz.h: Don't define __need_error_t before
including errno.h.
* sysdeps/i386/i686/fpu/multiarch/s_cosf-sse2.S
* sysdeps/i386/i686/fpu/multiarch/s_sincosf-sse2.S
* sysdeps/i386/i686/fpu/multiarch/s_sinf-sse2.S
* sysdeps/x86_64/fpu/s_cosf.S
* sysdeps/x86_64/fpu/s_sincosf.S
* sysdeps/x86_64/fpu/s_sinf.S:
Just include errno.h; don't define __need_Emath or include
bits/errno.h directly.
Add an undef of __stpcpy in string-inlines.c to avoid a redefinition
error on x86.
* string/string-inlines.c: Add undef of __stpcpy to fix build issue.
There is no longer a need for string2.h, so remove it and all mention of it.
Move the redirect for __stpcpy to include/string.h since it is still required
until all internal uses have been renamed.
This fixes several linknamespace/localplt failures when building with -Os.
[BZ #15105]
[BZ #19463]
* include/string.h: Add internal redirect for __stpcpy.
* string/Makefile: Remove bits/string2.h.
* string/string.h: Update comment.
* string/string-inlines.c: Remove bits/string2.h include and comment.
* string/bits/string2.h: Remove file.
This patch adds tests for len == 0 and tests for positions close to the
beginning, which are equivalent to positions close to the end for memchr.
* string/test-memrchr.c (test_main): Add tests for len == 0
and tests for positions close to the beginning, which are
equivalent to positions close to the end for memchr.
This patch adds a new build module called 'testsuite'.
IS_IN (testsuite) implies _ISOMAC, as do IS_IN_build and __cplusplus
(which means several ad-hoc tests for __cplusplus can go away).
libc-symbols.h now suppresses almost all of *itself* when _ISOMAC is
defined; in particular, _ISOMAC mode does not get config.h
automatically anymore.
There are still quite a few tests that need to see internal gunk of
one variety or another. For them, we now have 'tests-internal' and
'test-internal-extras'; files in this category will still be compiled
with MODULE_NAME=nonlib, and everything proceeds as it always has.
The bulk of this patch is moving tests from 'tests' to
'tests-internal'. There is also 'tests-static-internal', which has
the same effect on files in 'tests-static', and 'modules-names-tests',
which has the *inverse* effect on files in 'modules-names' (it's
inverted because most of the things in modules-names are *not* tests).
For both of these, the file must appear in *both* the new variable and
the old one.
There is also now a special case for when libc-symbols.h is included
without MODULE_NAME being defined at all. (This happens during the
creation of libc-modules.h, and also when preprocessing Versions
files.) When this happens, IS_IN is set to be always false and
_ISOMAC is *not* defined, which was the status quo, but now it's
explicit.
The remaining changes to C source files in this patch seemed likely to
cause problems in the absence of the main change. They should be
relatively self-explanatory. In a few cases I duplicated a definition
from an internal header rather than move the test to tests-internal;
this was a judgement call each time and I'm happy to change those
however reviewers feel is more appropriate.
* Makerules: New subdir configuration variables 'tests-internal'
and 'test-internal-extras'. Test files in these categories will
still be compiled with MODULE_NAME=nonlib. Test files in the
existing categories (tests, xtests, test-srcs, test-extras) are
now compiled with MODULE_NAME=testsuite.
New subdir configuration variable 'modules-names-tests'. Files
which are in both 'modules-names' and 'modules-names-tests' will
be compiled with MODULE_NAME=testsuite instead of
MODULE_NAME=extramodules.
(gen-as-const-headers): Move to tests-internal.
(do-tests-clean, common-mostlyclean): Support tests-internal.
* Makeconfig (built-modules): Add testsuite.
* Makefile: Change libof-check-installed-headers-c and
libof-check-installed-headers-cxx to 'testsuite'.
* Rules: Likewise. Support tests-internal.
* benchtests/strcoll-inputs/filelist#en_US.UTF-8:
Remove extra-modules.mk.
* config.h.in: Don't check for __OPTIMIZE__ or __FAST_MATH__ here.
* include/libc-symbols.h: Move definitions of _GNU_SOURCE,
PASTE_NAME, PASTE_NAME1, IN_MODULE, IS_IN, and IS_IN_LIB to the
very top of the file and rationalize their order.
If MODULE_NAME is not defined at all, define IS_IN to always be
false, and don't define _ISOMAC.
If any of IS_IN (testsuite), IS_IN_build, or __cplusplus are
true, define _ISOMAC and suppress everything else in this file,
starting with the inclusion of config.h.
Do check for inappropriate definitions of __OPTIMIZE__ and
__FAST_MATH__ here, but only if _ISOMAC is not defined.
Correct some out-of-date commentary.
* include/math.h: If _ISOMAC is defined, undefine NO_LONG_DOUBLE
and _Mlong_double_ before including math.h.
* include/string.h: If _ISOMAC is defined, don't expose
_STRING_ARCH_unaligned. Move a comment to a more appropriate
location.
* include/errno.h, include/stdio.h, include/stdlib.h, include/string.h
* include/time.h, include/unistd.h, include/wchar.h: No need to
check __cplusplus nor use __BEGIN_DECLS/__END_DECLS.
* misc/sys/cdefs.h (__NTHNL): New macro.
* sysdeps/m68k/m680x0/fpu/bits/mathinline.h
(__m81_defun): Use __NTHNL to avoid errors with GCC 6.
* elf/tst-env-setuid-tunables.c: Include config.h with _LIBC
defined, for HAVE_TUNABLES.
* inet/tst-checks-posix.c: No need to define _ISOMAC.
* intl/tst-gettext2.c: Provide own definition of N_.
* math/test-signgam-finite-c99.c: No need to define _ISOMAC.
* math/test-signgam-main.c: No need to define _ISOMAC.
* stdlib/tst-strtod.c: Convert to test-driver. Split locale_test to...
* stdlib/tst-strtod1i.c: ...this new file.
* stdlib/tst-strtod5.c: Convert to test-driver and add copyright notice.
Split tests of __strtod_internal to...
* stdlib/tst-strtod5i.c: ...this new file.
* string/test-string.h: Include stdint.h. Duplicate definition of
inhibit_loop_to_libcall here (from libc-symbols.h).
* string/test-strstr.c: Provide dummy definition of
libc_hidden_builtin_def when including strstr.c.
* sysdeps/ia64/fpu/libm-symbols.h: Suppress entire file in _ISOMAC
mode; no need to test __STRICT_ANSI__ nor __cplusplus as well.
* sysdeps/x86_64/fpu/math-tests-arch.h: Include cpu-features.h.
Don't include init-arch.h.
* sysdeps/x86_64/multiarch/test-multiarch.h: Include cpu-features.h.
Don't include init-arch.h.
* elf/Makefile: Move tst-ptrguard1-static, tst-stackguard1-static,
tst-tls1-static, tst-tls2-static, tst-tls3-static, loadtest,
unload, unload2, circleload1, neededtest, neededtest2,
neededtest3, neededtest4, tst-tls1, tst-tls2, tst-tls3,
tst-tls6, tst-tls7, tst-tls8, tst-dlmopen2, tst-ptrguard1,
tst-stackguard1, tst-_dl_addr_inside_object, and all of the
ifunc tests to tests-internal.
Don't add $(modules-names) to test-extras.
* inet/Makefile: Move tst-inet6_scopeid_pton to tests-internal.
Add tst-deadline to tests-static-internal.
* malloc/Makefile: Move tst-mallocstate and tst-scratch_buffer to
tests-internal.
* misc/Makefile: Move tst-atomic and tst-atomic-long to tests-internal.
* nptl/Makefile: Move tst-typesizes, tst-rwlock19, tst-sem11,
tst-sem12, tst-sem13, tst-barrier5, tst-signal7, tst-tls3,
tst-tls3-malloc, tst-tls5, tst-stackguard1, tst-sem11-static,
tst-sem12-static, and tst-stackguard1-static to tests-internal.
Link tests-internal with libpthread also.
Don't add $(modules-names) to test-extras.
* nss/Makefile: Move tst-field to tests-internal.
* posix/Makefile: Move bug-regex5, bug-regex20, bug-regex33,
tst-rfc3484, tst-rfc3484-2, and tst-rfc3484-3 to tests-internal.
* stdlib/Makefile: Move tst-strtod1i, tst-strtod3, tst-strtod4,
tst-strtod5i, tst-tls-atexit, and tst-tls-atexit-nodelete to
tests-internal.
* sunrpc/Makefile: Move tst-svc_register to tests-internal.
* sysdeps/powerpc/Makefile: Move test-get_hwcap and
test-get_hwcap-static to tests-internal.
* sysdeps/unix/sysv/linux/Makefile: Move tst-setgetname to
tests-internal.
* sysdeps/x86_64/fpu/Makefile: Add all libmvec test modules to
modules-names-tests.
The default rawmemchr implementation uses memchr with size (size_t)-1,
which produces a warning with current GCC mainline. The warning seems
reasonable for normal code, so this patch uses the DIAG_* macros to
disable it.
Tested (compilation of glibc only) with build-many-glibcs.py for
arm-linux-gnueabi and powerpc64le-linux-gnu, two architectures for
which the build was previously failing. Note that the glibc testsuite
will still fail to build with GCC mainline because of
<https://gcc.gnu.org/bugzilla/show_bug.cgi?id=80669>.
* string/rawmemchr.c: Include <libc-diag.h>.
(RAWMEMCHR): Disable -Wstringop-overflow around call to memchr
with size (size_t)-1.
May be tricky for otimized implementations to handle strings around
page boundary once, for instance, it is performed unaligned loads or
when maxlen is used as a hint for vectorized loops. The test cases
should unveil regression bugs on these cases.
To some extend do_random_tests in string/test-strnlen tests strings
placed at page end but it does not cover all cases. So this change
adds tests which consists of placing strings of varying sizes ending
at the page boundary. It also combines with different values of maxlen.
Tested on ppc64le and x86_64.
* string/test-strnlen.c (do_page_tests): New function
to check length of strings ending at the page boundary.
(test_main): Added call to the do_page_tests function.
This patch fixes the regression added by 23d2770 for final address
overflow calculation. The subtraction of the considered size (16)
at line 120 is at wrong place, for sizes less than 16 subsequent
overflow check will not take in consideration an invalid size (since
the subtraction will be negative). Also, the lea instruction also
does not raise the carry flag (CF) that is used in subsequent jbe
to check for overflow.
The fix is to follow x86_64 logic from 3daef2c where the overflow
is first check and a sub instruction is issued. In case of resulting
negative size, CF will be set by the sub instruction and a NULL
result will be returned. The patch also add similar tests reported
in bug report.
Checked on i686-linux-gnu and x86_64-linux-gnu.
* string/test-memchr.c (do_test): Add BZ#21182 checks for address
near end of a page.
* sysdeps/i386/i686/multiarch/memchr-sse2.S (__memchr): Fix
overflow calculation.
glibc headers include some code (not particularly consistent or
systematic) to put various declarations in C++ namespaces std and
__c99, if _GLIBCPP_USE_NAMESPACES is defined.
As noted in <https://gcc.gnu.org/ml/libstdc++/2017-03/msg00025.html>,
this macro was removed from libstdc++ in 2000. I don't expect
compilation with such old versions of libstdc++ to work with current
glibc headers anyway (whereas old *binaries* are expected to stay
working with current glibc); this patch (which should be a no-op with
any libstdc++ version postdating that removal) removes all this code
from the glibc headers.
The begin-end-check.pl test, whose comments say it is about checking
these namespace macro calls, is also removed. The code in that test
would have covered __BEGIN_DECLS / __END_DECLS as well, but if those
weren't properly matched it would show up with the
check-installed-headers-cxx tests, so I don't think there is an actual
use for keeping begin-end-check.pl with the namespace code removed.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* misc/sys/cdefs.h (__BEGIN_NAMESPACE_STD): Remove macro.
(__END_NAMESPACE_STD): Likewise.
(__USING_NAMESPACE_STD): Likewise.
(__BEGIN_NAMESPACE_C99): Likewise.
(__END_NAMESPACE_C99): Likewise.
(__USING_NAMESPACE_C99): Likewise.
* math/math.h (_Mdouble_BEGIN_NAMESPACE): Do not define and
undefine macro.
(_Mdouble_END_NAMESPACE): Likewise.
* ctype/ctype.h: Do not handle C++ namespaces.
* libio/bits/stdio-ldbl.h: Likewise.
* libio/stdio.h: Likewise.
* locale/locale.h: Likewise.
* math/bits/mathcalls.h: Likewise.
* setjmp/setjmp.h: Likewise.
* signal/signal.h: Likewise.
* stdlib/bits/stdlib-float.h: Likewise.
* stdlib/bits/stdlib-ldbl.h: Likewise.
* stdlib/stdlib.h: Likewise.
* string/string.h: Likewise.
* sysdeps/x86/fpu/bits/mathinline.h: Likewise.
* time/bits/types/clock_t.h: Likewise.
* time/bits/types/struct_tm.h: Likewise.
* time/bits/types/time_t.h: Likewise.
* time/time.h: Likewise.
* wcsmbs/bits/wchar-ldbl.h: Likewise.
* wcsmbs/uchar.h: Likewise.
* wcsmbs/wchar.h: Likewise.
[_GLIBCPP_USE_NAMESPACES] (wint_t): Remove conditional definition.
* wctype/wctype.h: Do not handle C++ namespaces.
* scripts/begin-end-check.pl: Remove.
* Makefile (installed-headers): Likewise.
(tests-special): Do not add $(objpfx)begin-end-check.out.
($(objpfx)begin-end-check.out): Remove.
calls with constant strings shows a small (~10%) performance gain, strdup is
typically used in error reporting code, so not performance critical.
Remove the now unused __need_malloc_and_calloc related defines from stdlib.h.
Rename existing uses of str(n)dup to __str(n)dup so it no longer needs to be
redirected to a builtin. Also building GLIBC with -Os now no longer shows
localplt or linkname space failures (partial fix for BZ #15105 and BZ #19463).
[BZ #15105]
[BZ #19463]
* elf/dl-cache.c (_dl_load_cache_lookup): Use __strdup.
* inet/rcmd.c (rcmd_af): Likewise.
* inet/rexec.c (rexec_af): Likewise.
* intl/dcigettext.c (_LIBC): Likewise.
* intl/finddomain.c (_nl_find_domain): Use strdup expansion.
* locale/loadarchive.c (_nl_load_locale_from_archive): Use __strdup.
* locale/setlocale.c (setlocale): Likewise.
* posix/spawn_faction_addopen.c
(posix_spawn_file_actions_addopen): Likewise.
* stdlib/putenv.c (putenv): Use __strndup.
* sunrpc/svc_simple.c (__registerrpc): Use __strdup.
* sysdeps/posix/getaddrinfo.c (gaih_inet): Use __strdup/__strndup.
* include/stdlib.h (__need_malloc_and_calloc): Remove uses.
(__Need_M_And_C) Remove define/undef.
* stdlib/stdlib.h (__need_malloc_and_calloc): Remove uses.
(__malloc_and_calloc_defined): Remove define.
* string/bits/string2.h (__strdup): Remove define.
(strdup): Likewise.
(__strndup): Likewise.
(strndup): Likewise.
posix/wordexp-test.c used libc-internal.h for PTR_ALIGN_DOWN; similar
to what was done with libc-diag.h, I have split the definitions of
cast_to_integer, ALIGN_UP, ALIGN_DOWN, PTR_ALIGN_UP, and PTR_ALIGN_DOWN
to a new header, libc-pointer-arith.h.
It then occurred to me that the remaining declarations in libc-internal.h
are mostly to do with early initialization, and probably most of the
files including it, even in the core code, don't need it anymore. Indeed,
only 19 files actually need what remains of libc-internal.h. 23 others
need libc-diag.h instead, and 12 need libc-pointer-arith.h instead.
No file needs more than one of them, and 16 don't need any of them!
So, with this patch, libc-internal.h stops including libc-diag.h as
well as losing the pointer arithmetic macros, and all including files
are adjusted.
* include/libc-pointer-arith.h: New file. Define
cast_to_integer, ALIGN_UP, ALIGN_DOWN, PTR_ALIGN_UP, and
PTR_ALIGN_DOWN here.
* include/libc-internal.h: Definitions of above macros
moved from here. Don't include libc-diag.h anymore either.
* posix/wordexp-test.c: Include stdint.h and libc-pointer-arith.h.
Don't include libc-internal.h.
* debug/pcprofile.c, elf/dl-tunables.c, elf/soinit.c, io/openat.c
* io/openat64.c, misc/ptrace.c, nptl/pthread_clock_gettime.c
* nptl/pthread_clock_settime.c, nptl/pthread_cond_common.c
* string/strcoll_l.c, sysdeps/nacl/brk.c
* sysdeps/unix/clock_settime.c
* sysdeps/unix/sysv/linux/i386/get_clockfreq.c
* sysdeps/unix/sysv/linux/ia64/get_clockfreq.c
* sysdeps/unix/sysv/linux/powerpc/get_clockfreq.c
* sysdeps/unix/sysv/linux/sparc/sparc64/get_clockfreq.c:
Don't include libc-internal.h.
* elf/get-dynamic-info.h, iconv/loop.c
* iconvdata/iso-2022-cn-ext.c, locale/weight.h, locale/weightwc.h
* misc/reboot.c, nis/nis_table.c, nptl_db/thread_dbP.h
* nscd/connections.c, resolv/res_send.c, soft-fp/fmadf4.c
* soft-fp/fmasf4.c, soft-fp/fmatf4.c, stdio-common/vfscanf.c
* sysdeps/ieee754/dbl-64/e_lgamma_r.c
* sysdeps/ieee754/dbl-64/k_rem_pio2.c
* sysdeps/ieee754/flt-32/e_lgammaf_r.c
* sysdeps/ieee754/flt-32/k_rem_pio2f.c
* sysdeps/ieee754/ldbl-128/k_tanl.c
* sysdeps/ieee754/ldbl-128ibm/k_tanl.c
* sysdeps/ieee754/ldbl-96/e_lgammal_r.c
* sysdeps/ieee754/ldbl-96/k_tanl.c, sysdeps/nptl/futex-internal.h:
Include libc-diag.h instead of libc-internal.h.
* elf/dl-load.c, elf/dl-reloc.c, locale/programs/locarchive.c
* nptl/nptl-init.c, string/strcspn.c, string/strspn.c
* malloc/malloc.c, sysdeps/i386/nptl/tls.h
* sysdeps/nacl/dl-map-segments.h, sysdeps/x86_64/atomic-machine.h
* sysdeps/unix/sysv/linux/spawni.c
* sysdeps/x86_64/nptl/tls.h:
Include libc-pointer-arith.h instead of libc-internal.h.
* elf/get-dynamic-info.h, sysdeps/nacl/dl-map-segments.h
* sysdeps/x86_64/atomic-machine.h:
Add multiple include guard.
These are a grab bag of changes where the testsuite was using internal
symbols of some variety, but this was straightforward to fix, and the
fixed code should work with or without the change to compile the
testsuite under _ISOMAC.
Four of these are just more #include adjustments, but I want to highlight
sysdeps/powerpc/fpu/tst-setcontext-fpscr.c, which appears to have been
written before the advent of sys/auxv.h. I think a big chunk of this file
could be replaced by a simple call to getauxval, but I'll let someone who
actually has a powerpc machine to test on do that.
dlfcn/tst-dladdr.c was including ldsodefs.h just so it could use
DL_LOOKUP_ADDRESS to print an additional diagnostic; as requested by Carlos,
I have removed this.
math/test-misc.c was using #ifndef NO_LONG_DOUBLE, which is an internal
configuration macro, to decide whether to do certain tests involving
'long double'. I changed the test to #if LDBL_MANT_DIG > DBL_MANT_DIG
instead, which uses only public float.h macros and is equivalent on
all supported platforms. (Note that NO_LONG_DOUBLE doesn't mean 'the
compiler doesn't support long double', it means 'long double is the
same as double'.)
tst-writev.c has a configuration macro 'ARTIFICIAL_LIMIT' that the
Makefiles are expected to define, and sysdeps/unix/sysv/linux/Makefile
was using the internal __getpagesize in the definition; changed to
sysconf(_SC_PAGESIZE) which is the POSIX equivalent.
ia64-linux doesn't supply 'clone', only '__clone2', which is not
defined in the public headers(!) All the other clone tests have local
extern declarations of __clone2, but tst-clone.c doesn't; it was
getting away with this because include/sched.h does declare __clone2.
* nss/tst-cancel-getpwuid_r.c: Include nss.h.
* string/strcasestr.c: No need to include config.h.
* sysdeps/powerpc/fpu/tst-setcontext-fpscr.c: Include
sys/auxv.h. Don't include sysdep.h.
* sysdeps/powerpc/tst-set_ppr.c: Don't include dl-procinfo.h.
* dlfcn/tst-dladdr.c: Don't include ldsodefs.h. Don't use
DL_LOOKUP_ADDRESS.
* math/test-misc.c: Instead of testing NO_LONG_DOUBLE, test whether
LDBL_MANT_DIG is greater than DBL_MANT_DIG.
* sysdeps/unix/sysv/linux/Makefile (CFLAGS-tst-writev.c): Use
sysconf (_SC_PAGESIZE) instead of __getpagesize in definition
of ARTIFICIAL_LIMIT.
* sysdeps/unix/sysv/linux/tst-clone.c [__ia64__]: Add extern
declaration of __clone2.
Quite a few tests include libc-internal.h just for the DIAG_* macros.
Split those macros to their own file, which can be included safely in
_ISOMAC mode. I also moved ignore_value, since it seems logically
related, even though I didn't notice any tests needing it.
Also add -Wnonnull suppressions to two tests that _should_ have them,
but the error is masked when compiling against internal headers.
* include/libc-diag.h: New file. Define ignore_value,
DIAG_PUSH_NEEDS_COMMENT, DIAG_POP_NEEDS_COMMENT,
DIAG_IGNORE_NEEDS_COMMENT, and DIAG_IGNORE_Os_NEEDS_COMMENT here.
* include/libc-internal.h: Definitions of above macros moved from
here. Include libc-diag.h. Add copyright notice.
* malloc/tst-malloc.c, malloc/tst-memcheck.c, malloc/tst-realloc.c
* misc/tst-error1.c, posix/tst-dir.c, stdio-common/bug21.c
* stdio-common/scanf14.c, stdio-common/scanf4.c, stdio-common/scanf7.c
* stdio-common/test-vfprintf.c, stdio-common/tst-printf.c
* stdio-common/tst-printfsz.c, stdio-common/tst-sprintf.c
* stdio-common/tst-unlockedio.c, stdio-common/tstdiomisc.c
* stdlib/bug-getcontext.c, string/tester.c, string/tst-endian.c
* time/tst-strptime2.c, wcsmbs/tst-wcstof.c:
Include libc-diag.h instead of libc-internal.h.
* stdlib/tst-environ.c: Include libc-diag.h. Suppress -Wnonnull for
call to unsetenv (NULL).
* nptl/tst-mutex1.c: Include libc-diag.h. Suppress -Wnonnull for
call to pthread_mutexattr_destroy (NULL).
* crypt/md5.h: Test _LIBC with #if defined, not #if.
* dirent/opendir-tst1.c: Include sys/stat.h.
* dirent/tst-fdopendir.c: Include sys/stat.h.
* dirent/tst-fdopendir2.c: Include stdlib.h.
* dirent/tst-scandir.c: Include stdbool.h.
* elf/tst-auditmod1.c: Include link.h and stddef.h.
* elf/tst-tls15.c: Include stdlib.h.
* elf/tst-tls16.c: Include stdlib.h.
* elf/tst-tls17.c: Include stdlib.h.
* elf/tst-tls18.c: Include stdlib.h.
* iconv/tst-iconv6.c: Include endian.h.
* iconvdata/bug-iconv11.c: Include limits.h.
* io/test-utime.c: Include stdint.h.
* io/tst-faccessat.c: Include sys/stat.h.
* io/tst-fchmodat.c: Include sys/stat.h.
* io/tst-fchownat.c: Include sys/stat.h.
* io/tst-fstatat.c: Include sys/stat.h.
* io/tst-futimesat.c: Include sys/stat.h.
* io/tst-linkat.c: Include sys/stat.h.
* io/tst-mkdirat.c: Include sys/stat.h and stdbool.h.
* io/tst-mkfifoat.c: Include sys/stat.h and stdbool.h.
* io/tst-mknodat.c: Include sys/stat.h and stdbool.h.
* io/tst-openat.c: Include stdbool.h.
* io/tst-readlinkat.c: Include sys/stat.h.
* io/tst-renameat.c: Include sys/stat.h.
* io/tst-symlinkat.c: Include sys/stat.h.
* io/tst-unlinkat.c: Include stdbool.h.
* libio/bug-memstream1.c: Include stdlib.h.
* libio/bug-wmemstream1.c: Include stdlib.h.
* libio/tst-fwrite-error.c: Include stdlib.h.
* libio/tst-memstream1.c: Include stdlib.h.
* libio/tst-memstream2.c: Include stdlib.h.
* libio/tst-memstream3.c: Include stdlib.h.
* malloc/tst-interpose-aux.c: Include stdint.h.
* misc/tst-preadvwritev-common.c: Include sys/stat.h.
* nptl/tst-basic7.c: Include limits.h.
* nptl/tst-cancel25.c: Include pthread.h, not pthreadP.h.
* nptl/tst-cancel4.c: Include stddef.h, limits.h, and sys/stat.h.
* nptl/tst-cancel4_1.c: Include stddef.h.
* nptl/tst-cancel4_2.c: Include stddef.h.
* nptl/tst-cond16.c: Include limits.h.
Use sysconf(_SC_PAGESIZE) instead of __getpagesize.
* nptl/tst-cond18.c: Include limits.h.
Use sysconf(_SC_PAGESIZE) instead of __getpagesize.
* nptl/tst-cond4.c: Include stdint.h.
* nptl/tst-cond6.c: Include stdint.h.
* nptl/tst-stack2.c: Include limits.h.
* nptl/tst-stackguard1.c: Include stddef.h.
* nptl/tst-tls4.c: Include stdint.h. Don't include tls.h.
* nptl/tst-tls4moda.c: Include stddef.h.
Don't include stdio.h, unistd.h, or tls.h.
* nptl/tst-tls4modb.c: Include stddef.h.
Don't include stdio.h, unistd.h, or tls.h.
* nptl/tst-tls5.h: Include stddef.h. Don't include stdlib.h or tls.h.
* posix/tst-getaddrinfo2.c: Include stdio.h.
* posix/tst-getaddrinfo5.c: Include stdio.h.
* posix/tst-pathconf.c: Include sys/stat.h.
* posix/tst-posix_fadvise-common.c: Include stdint.h.
* posix/tst-preadwrite-common.c: Include sys/stat.h.
* posix/tst-regex.c: Include stdint.h.
Don't include spawn.h or spawn_int.h.
* posix/tst-regexloc.c: Don't include spawn.h or spawn_int.h.
* posix/tst-vfork3.c: Include sys/stat.h.
* resolv/tst-bug18665-tcp.c: Include stdlib.h.
* resolv/tst-res_hconf_reorder.c: Include stdlib.h.
* resolv/tst-resolv-search.c: Include stdlib.h.
* stdio-common/tst-fmemopen2.c: Include stdint.h.
* stdio-common/tst-vfprintf-width-prec.c: Include stdlib.h.
* stdlib/test-canon.c: Include sys/stat.h.
* stdlib/tst-tls-atexit.c: Include stdbool.h.
* string/test-memchr.c: Include stdint.h.
* string/tst-cmp.c: Include stdint.h.
* sysdeps/pthread/tst-timer.c: Include stdint.h.
* sysdeps/unix/sysv/linux/tst-sync_file_range.c: Include stdint.h.
* sysdeps/wordsize-64/tst-writev.c: Include limits.h and stdint.h.
* sysdeps/x86_64/fpu/math-tests-arch.h: Include cpu-features.h.
Don't include init-arch.h.
* sysdeps/x86_64/multiarch/test-multiarch.h: Include cpu-features.h.
Don't include init-arch.h.
* sysdeps/x86_64/tst-auditmod10b.c: Include link.h and stddef.h.
* sysdeps/x86_64/tst-auditmod3b.c: Include link.h and stddef.h.
* sysdeps/x86_64/tst-auditmod4b.c: Include link.h and stddef.h.
* sysdeps/x86_64/tst-auditmod5b.c: Include link.h and stddef.h.
* sysdeps/x86_64/tst-auditmod6b.c: Include link.h and stddef.h.
* sysdeps/x86_64/tst-auditmod6c.c: Include link.h and stddef.h.
* sysdeps/x86_64/tst-auditmod7b.c: Include link.h and stddef.h.
* time/clocktest.c: Include stdint.h.
* time/tst-posixtz.c: Include stdint.h.
* timezone/tst-timezone.c: Include stdint.h.
* string/string.h [__USE_MISC]: Include strings.h.
(__bzero, bcmp, bcopy, bzero, index, rindex)
(strcasecmp, strncasecmp, strcasecmp_l, strncasecmp_l)
(ffs, ffsl, ffsll): Don't declare.
* string/strings.h: Do not suppress the file if string.h has
already been included.
(bcmp, bcopy, bzero, strcasecmp, strncasecmp): Add __nonnull
annotations.
(index, rindex): Define inline forwarders even if
__CORRECT_ISO_CPP_STRING_H_PROTO is defined.
(ffs): Use __attribute_const__.
(ffsl, ffsll): Declare here.
(strcasecmp_l, strncasecmp_l): Correct comments; these functions
have now been standardized.
* include/string.h (__bzero): Declare here.
optimization seems unlikely to ever be useful, but if it occurs in
real code it should be added to GCC. Expanding strcmp of small strings
does appear useful (benchmarking shows it is 2-3x faster), so this would
be useful to implement in GCC (PR 78809).
* string/bits/string2.h (strcmp): Remove define.
(__strcmp_cg): Likewise.
(strncmp): Likewise.
This is transformed into rawmemchr by the bits/string2.h header.
However this is generally slower than strlen on most targets, even when
an optimized rawmemchr implementation exists. Since GCC7 optimizes
strchr (s, '\0') to strlen (s) + s, the GLIBC headers should not
transform this to rawmemchr. As GCC recognizes strchr as a builtin,
defining strchr as the builtin is not useful.
* string/bits/string2.h (strchr): Remove define.
On s390x this test failed with:
FAIL: explicit clear/test: expected 0 got 1
In setup_explicit_clear, the buffer is filled with the test_pattern.
On s390x the memcpy in prepare_test_buffer is done by loading
r4 / r5 with the test_pattern and using store multiple instruction
to store r4 / r5 to buf.
If explicit_bzero is resolved in setup_explicit_clear, r4 / r5 is
stored to stack by _dl_runtime_resolve and the call to memmem in
count_test_patterns finds a hit of the test_pattern on the stack.
This patch resolves all symbols at program startup by linking with
-z now. This omits the call of _dl_runtime_resolve within
setup_explicit_clear and the test passes.
ChangeLog:
[BZ #21006]
* string/Makefile (LDFLAGS-tst-xbzero-opt): New variable.
Bug 16458 reports that the endian-conversion macros in <endian.h> and
<netinet/in.h>, in the case where no endian conversion is needed, just
return their arguments without converting to the expected return type,
so failing to act as expected for a macro version of a function. (The
<netinet/in.h> macros, in particular, are described with prototypes in
POSIX so should act like correspondingly prototyped functions.)
Where previously this was a fairly obscure issue, it now results in
glibc build with GCC mainline breaking for big-endian systems:
nss_hesiod/hesiod-service.c: In function '_nss_hesiod_getservbyport_r':
nss_hesiod/hesiod-service.c:142:39: error: '%d' directive output may be truncated writing between 1 and 11 bytes into a region of size 6 [-Werror=format-truncation=]
snprintf (portstr, sizeof portstr, "%d", ntohs (port));
^~
nss_hesiod/hesiod-service.c:142:38: note: using the range [1, -2147483648] for directive argument
snprintf (portstr, sizeof portstr, "%d", ntohs (port));
^~~~
nss_hesiod/hesiod-service.c:142:3: note: format output between 2 and 12 bytes into a destination of size 6
snprintf (portstr, sizeof portstr, "%d", ntohs (port));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The port argument is passed as int to this function, so when ntohs
does not convert the compiler cannot tell that the result is within
the range of uint16_t. (I don't know if in fact it's possible for
out-of-range values to reach this function and so get truncated as
strings without this patch or as integers with it.)
This patch arranges for these macros to use identity functions to
ensure appropriate conversions while having warnings for implicit
conversions of function arguments that might not occur with a cast.
Tested for x86_64 and x86; with build-many-glibcs.py with GCC 6; and
with build-many-glibcs.py with GCC mainline for powerpc to test the
build fix.
[BZ #16458]
* bits/uintn-identity.h: New file.
* inet/netinet/in.h: Include <bits/uintn-identity.h>.
[__BYTE_ORDER == __BIG_ENDIAN] (ntohl): Use __uint32_identity.
[__BYTE_ORDER == __BIG_ENDIAN] (ntohs): Use __uint16_identity.
[__BYTE_ORDER == __BIG_ENDIAN] (htonl): Use __uint32_identity.
[__BYTE_ORDER == __BIG_ENDIAN] (htohs): Use __uint16_identity.
* string/endian.h: Include <bits/uintn-identity.h>.
[__BYTE_ORDER == __LITTLE_ENDIAN] (htole16): Use
__uint16_identity.
[__BYTE_ORDER == __LITTLE_ENDIAN] (le16toh): Likewise.
[__BYTE_ORDER == __LITTLE_ENDIAN] (htole32): Use
__uint32_identity.
[__BYTE_ORDER == __LITTLE_ENDIAN] (le32toh): Likewise.
[__BYTE_ORDER == __LITTLE_ENDIAN] (htole64): Use
__uint64_identity.
[__BYTE_ORDER == __LITTLE_ENDIAN] (le64toh): Likewise.
[__BYTE_ORDER != __LITTLE_ENDIAN] (htobe16): Use
__uint16_identity.
[__BYTE_ORDER != __LITTLE_ENDIAN] (be16toh): Likewise.
[__BYTE_ORDER != __LITTLE_ENDIAN] (htobe32): Use
__uint32_identity.
[__BYTE_ORDER != __LITTLE_ENDIAN] (be32toh): Likewise.
[__BYTE_ORDER != __LITTLE_ENDIAN] (htobe64): Use
__uint64_identity.
[__BYTE_ORDER != __LITTLE_ENDIAN] (be64toh): Likewise.
* string/Makefile (headers): Add bits/uintn-identity.h.
(tests): Add test-endian-types.
* string/test-endian-types.c: New file.
* inet/Makefile (tests): Add test-hnto-types.
* inet/test-hnto-types.c: New file.
Commit 38765ab68f moved the bzero, bcopy, and explicit_bzero
fortified macros to a common header (strings_fortified.h). However
the side effect is a fortified explicit_bzero is defined when including
only strings.h.
This patch moves back the fortified explicit_bzero definition to
strings3.h header.
Checked on x86_64-linux-gnu.
* string/bits/strings_fortified.h (explicit_bzero): Move back to ..
* string/bits/string3.h: ... here.
As described in BZ#20558, bzero and bcopy declaration can only benefit
from fortified macros when decl came from string.h and when __USE_MISC
is defined (default behaviour).
This is due no standard includes those functions in string.h, so they
are only declared if __USE_MISC is defined (as pointed out in comment 4).
However fortification should be orthogona to other features test macros,
i.e, any function should be fortified if that function is declared.
To fix this behavior, the patch moved the bzero, bcopy, and
__explicit_bzero_chk to a common header (string/bits/strings_fortified.h)
and explicit fortified inclusion macros similar to string.h is added
on strings.h. This allows to get fortified declarions by only including
strings.h.
Checked on x86_64-linux-gnu and along on a bootstrap installation to check
if the fortified are correctly triggered with example from bug report.
[BZ #20558]
* string/bits/string3.h [__USE_MISC] (bcopy): Move to
strings_fortified.h.
[__USE_MISC] (bzero): Likewise.
[__USE_MISC] (explicit_bzero): Likewise.
* string/strings.h: Include strings_fortified.h.
* string/Makefile (headers): Add strings_fortified.h.
* string/bits/strings_fortified.h: New file.
* include/bits/strings_fortified.h: Likewise.
GCC 7 has a -Wstringop-overflow= warning that includes warning for
strncat with a size specified that is larger than the size of the
buffer (which is dubious usage, but valid at runtime if in fact there
isn't an overflow with the particular buffer contents present).
string/tester.c tests such cases; this patch arranges for this warning
to be ignored around relevant strncat calls.
Tested compilation for aarch64 (GCC mainline) with
build-many-glibcs.py; did execution testing for x86_64 (GCC 5).
* string/tester.c (test_strncat): Disable -Wstringop-overflow=
around tests of strncat with large sizes.
Similar to BZ#19387, BZ#21014, and BZ#20971, both x86 sse2 strncat
optimized assembly implementations do not handle the size overflow
correctly.
The x86_64 one is in fact an issue with strcpy-sse2-unaligned, but
that is triggered also with strncat optimized implementation.
This patch uses a similar strategy used on 3daef2c8ee, where
saturared math is used for overflow case.
Checked on x86_64-linux-gnu and i686-linux-gnu. It fixes BZ #19390.
[BZ #19390]
* string/test-strncat.c (test_main): Add tests with SIZE_MAX as
maximum string size.
* sysdeps/i386/i686/multiarch/strcat-sse2.S (STRCAT): Avoid overflow
in pointer addition.
* sysdeps/x86_64/multiarch/strcpy-sse2-unaligned.S (STRCPY):
Likewise.
Current optimized memchr for x86_64 does for input arguments pointers
module 64 in range of [49,63] if there is no searchr char in the rest
of 64-byte block a pointer addition which might overflow:
* sysdeps/x86_64/memchr.S
77 .p2align 4
78 L(unaligned_no_match):
79 add %rcx, %rdx
Add (uintptr_t)s % 16 to n in %rdx.
80 sub $16, %rdx
81 jbe L(return_null)
This patch fixes by adding a saturated math that sets a maximum pointer
value if it overflows (UINTPTR_MAX).
Checked on x86_64-linux-gnu and powerpc64-linux-gnu.
[BZ# 19387]
* sysdeps/x86_64/memchr.S (memchr): Avoid overflow in pointer
addition.
* string/test-memchr.c (do_test): Remove alignment limitation.
(test_main): Add test that trigger BZ# 19387.
The startup code in csu/, and the brk and sbrk functions are
needed very early in initialization of a statically-linked program,
before the stack guard is initialized; TLS initialization also uses
memcpy, which cannot overrun its own stack. Mark all of these as
-fno-stack-protector.
We also finally introduce @libc_cv_ssp@ and @no_stack_protector@, both
substituted by the configury changes made earlier, to detect the case
when -fno-stack-protector is supported by the compiler, and
unconditionally pass it in when this is the case, whether or not
--enable-stack-protector is passed to configure. (This means that
it'll even work when the compiler's been hacked to pass
-fstack-protector by default, unless the hackage is so broken that
it does so in a way that is impossible to override.)
Currently strsep calls strpbrk is is now a veneer to strcspn. Calling
strcspn directly is faster. Since it handles a delimiter string of size
1 as a special case, this is not needed in strsep itself. Although this
means there is a slightly higher overhead if the delimiter size is 1,
all other cases are slightly faster. The overall performance gain is 5-10%
on AArch64.
The string/bits/string2.h header contains optimizations for constant
delimiters of size 1-3. Benchmarking these showed similar performance for
size 1 (since in all cases strchr/strchrnul is used), while size 2 and 3
can give up to 2x speedup for small input strings. However if these cases
are common it seems much better to add this optimization to strcspn.
So move these header optimizations to string-inlines.c.
Improve the strsep benchmark so that it actually benchmarks something.
The current version contains a delimiter character at every position in the
input string, so there is very little work to do, and the extremely inefficent
simple_strsep implementation appears fastest in every case. The new version
has either no match in the input for the fail case and a match halfway in the
input for the success case. The input is then restored so that each iteration
does exactly the same amount of work. Reduce the number of testcases since
simple_strsep takes a lot of time now.
* benchtests/bench-strsep.c (oldstrsep): Add old implementation.
(do_one_test) Restore original string so iteration works.
* string/string-inlines.c (do_test): Create better input strings.
(test_main) Reduce number of testruns.
* string/string-inlines.c (__old_strsep_1c): New function.
(__old_strsep_2c): Likewise.
(__old_strsep_3c): Likewise.
* string/strsep.c (__strsep): Remove case of small delim string.
Call strcspn directly rather than strpbrk.
* string/bits/string2.h (__strsep): Remove define.
(__strsep_1c): Remove.
(__strsep_2c): Remove.
(__strsep_3c): Remove.
(strsep): Remove.
* sysdeps/unix/sysv/linux/internal_statvfs.c
(__statvfs_getflags): Rename to __strsep.
Some targets fail to apply dead store elimination to the
memset call in setup_ordinary_clear. Before this commit,
this causes the test case to fail. Instead, the test case
now logs lack of memset elimination as an informational
message.
explicit_bzero(s, n) is the same as memset(s, 0, n), except that the
compiler is not allowed to delete a call to explicit_bzero even if the
memory pointed to by 's' is dead after the call. Right now, this effect
is achieved externally by having explicit_bzero be a function whose
semantics are unknown to the compiler, and internally, with a no-op
asm statement that clobbers memory. This does mean that small
explicit_bzero operations cannot be expanded inline as small memset
operations can, but on the other hand, small memset operations do get
deleted by the compiler. Hopefully full compiler support for
explicit_bzero will happen relatively soon.
There are two new tests: test-explicit_bzero.c verifies the
visible semantics in the same way as the existing test-bzero.c,
and tst-xbzero-opt.c verifies the not-being-optimized-out property.
The latter is conceptually based on a test written by Matthew Dempsky
for the OpenBSD regression suite.
The crypt() implementation has an immediate use for this new feature.
We avoid having to add a GLIBC_PRIVATE alias for explicit_bzero
by running all of libcrypt's calls through the fortified variant,
__explicit_bzero_chk, which is in the impl namespace anyway. Currently
I'm not aware of anything in libc proper that needs this, but the
glue is all in place if it does become necessary. The legacy DES
implementation wasn't bothering to clear its buffers, so I added that,
mostly for consistency's sake.
* string/explicit_bzero.c: New routine.
* string/test-explicit_bzero.c, string/tst-xbzero-opt.c: New tests.
* string/Makefile (routines, strop-tests, tests): Add them.
* string/test-memset.c: Add ifdeffage for testing explicit_bzero.
* string/string.h [__USE_MISC]: Declare explicit_bzero.
* debug/explicit_bzero_chk.c: New routine.
* debug/Makefile (routines): Add it.
* debug/tst-chk1.c: Test fortification of explicit_bzero.
* string/bits/string3.h: Fortify explicit_bzero.
* manual/string.texi: Document explicit_bzero.
* NEWS: Mention addition of explicit_bzero.
* crypt/crypt-entry.c (__crypt_r): Clear key-dependent intermediate
data before returning, using explicit_bzero.
* crypt/md5-crypt.c (__md5_crypt_r): Likewise.
* crypt/sha256-crypt.c (__sha256_crypt_r): Likewise.
* crypt/sha512-crypt.c (__sha512_crypt_r): Likewise.
* include/string.h: Redirect internal uses of explicit_bzero
to __explicit_bzero_chk[_internal].
* string/Versions [GLIBC_2.25]: Add explicit_bzero.
* debug/Versions [GLIBC_2.25]: Add __explicit_bzero_chk.
* sysdeps/arm/nacl/libc.abilist
* sysdeps/unix/sysv/linux/aarch64/libc.abilist
* sysdeps/unix/sysv/linux/alpha/libc.abilist
* sysdeps/unix/sysv/linux/arm/libc.abilist
* sysdeps/unix/sysv/linux/hppa/libc.abilist
* sysdeps/unix/sysv/linux/i386/libc.abilist
* sysdeps/unix/sysv/linux/ia64/libc.abilist
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist
* sysdeps/unix/sysv/linux/microblaze/libc.abilist
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist
* sysdeps/unix/sysv/linux/nios2/libc.abilist
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist
* sysdeps/unix/sysv/linux/sh/libc.abilist
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist
* sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist:
Add entries for explicit_bzero and __explicit_bzero_chk.
Current optimized powercp64/power7 memchr uses a strategy to check for
p versus align(p+n) (where 'p' is the input char pointer and n the
maximum size to check for the byte) without taking care for possible
overflow on the pointer addition in case of large 'n'.
It was triggered by 3038145ca2 where default rawmemchr (used to
created ppc64 rawmemchr in ifunc selection) now uses memchr (p, c, (size_t)-1)
on its implementation.
This patch fixes it by implement a satured addition where overflows
sets the maximum pointer size to UINTPTR_MAX.
Checked on powerpc64le-linux-gnu.
[BZ# 20971]
* sysdeps/powerpc/powerpc64/power7/memchr.S (__memchr): Avoid
overflow in pointer addition.
* string/test-memchr.c (do_test): Add an argument to pass as
the size on memchr.
(test_main): Add check for SIZE_MAX.
calls strcspn, call strcspn directly so we get the end of the token without
an extra call to rawmemchr. Also avoid an unnecessary call to strcspn after
the last token by adding an early exit for an empty string. Change strtok
to tailcall strtok_r to avoid unnecessary code duplication.
Remove the special header optimization for strtok_r of a 1-character
constant string - both strspn and strcspn contain optimizations for this
case. Benchmarking this showed similar performance in the worst case,
but up to 5.5x better performance in the "found" case for large inputs.
* benchtests/bench-strtok.c (oldstrtok): Add old implementation.
* string/strtok.c (strtok): Change to tailcall __strtok_r.
* string/strtok_r.c (__strtok_r): Optimize for performance.
* string/string-inlines.c (__old_strtok_r_1c): New function.
* string/bits/string2.h (__strtok_r): Move to string-inlines.c.
assembler version by tailcalling memchr with the maximum size.
If a target has an optimized memchr this is significantly faster,
if not, then this makes little difference.
Also optimize the special case of zero to use strlen as this is
typically faster than memchr.
* string/rawmemchr.c (RAWMEMCHR): Use faster memchr/strlen.
The comment above the bzero() macro in this file appears to have been
copied verbatim from the comment above the memset() prototype in
string.h proper. bzero() has no 'c' argument and can only set memory
contents to 0. (The comment above the prototype of bzero() in
string.h proper does not make the same mistake.)
* string/bits/string2.h: Fix typo in comment.
This commit adds a new DIAG_IGNORE_Os_NEEDS_COMMENT which is only
enabled when compiling with -Os. This allows developers working on
-Os enabled builds to mark false-positive warnings without impacting the
warnings emitted at -O2.
Then using the new DIAG_IGNORE_Os_NEEDS_COMMENT we fix 6 warnings
generated with GCC 5 to get -Os builds working again.
The new check-installed-headers rule check now complains with C++
comment from string3.h with:
../string/bits/string3.h:129:1: error: C++ style comments are not allowed in ISO C90
// XXX We have no corresponding builtin yet.
Let use old C style comment to make compiler happy in old modes.
Tested on x86_64.
* string/bits/string3.h: Remove C++ style comments.
This patch implements support for the __STDC_WANT_LIB_EXT2__ feature
test macro from ISO/IEC TR 24731-2:2010, thereby implementing one
possible approach for supporting ISO C feature test macros.
Recall that, as described in
<https://sourceware.org/ml/libc-alpha/2016-05/msg00486.html>, these
macros work based on the definition when affected headers are
included, so cannot be handled once when the first system header is
included because that might not be one of the headers the particular
macro in question affects.
<https://sourceware.org/ml/libc-alpha/2016-05/msg00680.html> expresses
views on possible approaches for implementation and
<https://sourceware.org/ml/libc-alpha/2016-06/msg00039.html> follows
up on that.
This patch arranges things so that the relevant condition is
__GLIBC_USE (LIB_EXT2), following one of the suggestions given.
Headers using these macros include <bits/libc-header-start.h>, which
in turn includes <features.h>. Headers must define
__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION before including
<bits/libc-header-start.h>, to discourage inclusion outside glibc as
requested. __USE_GNU conditions on affected functions are changed to
__GLIBC_USE (LIB_EXT2), while it's added as an additional alternative
on the conditions for functions already enabled for some POSIX
versions.
It would be possible to convert existing __USE_* conditionals to
__GLIBC_USE (with the relevant __GLIBC_USE_* being defined in
<features.h> where __USE_* are presently defined), and so make them
typo-proof (given -Wundef -Werror in glibc builds) because __GLIBC_USE
is used with #if not #ifdef / #if defined.
No attempt is made to enforce the rule about diagnosing different
definitions of __STDC_WANT_LIB_EXT2__ when affected headers are
included; such a diagnostic is incompatible with multiple-include
guards on the affected headers, unless compiler extensions are added
to support it.
As previously noted, glibc does not implement all features from TR
24731-2:2010: the functions aswprintf vaswprintf getwdelim getwline
are not in glibc, although they would be appropriate to add if someone
wished to do so. But I think it makes sense to support the feature
test macro if *any* of the controlled features are present in glibc.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* bits/libc-header-start.h: New file.
* Makefile (headers): Add bits/libc-header-start.h.
* include/features.h (__STDC_WANT_LIB_EXT2__): Document.
(__GLIBC_USE): New macro.
* libio/stdio.h: Define
__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
<bits/libc-header-start.h> instead of including <features.h>.
(fmemopen): Declare also if [__GLIBC_USE (LIB_EXT2)].
(open_memstream): Likewise.
(vasprintf): Declare if [__GLIBC_USE (LIB_EXT2)], not [__USE_GNU].
(__asprintf): Likewise.
(asprintf): Likewise.
(__getdelim): Declare also if [__GLIBC_USE (LIB_EXT2)].
(getdelim): Likewise.
(getline): Likewise.
* string/string.h: Define
__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
<bits/libc-header-start.h> instead of including <features.h>.
(strdup): Declare also if [__GLIBC_USE (LIB_EXT2)]
(strndup): Likewise.
* wcsmbs/wchar.h: Define
__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
<bits/libc-header-start.h> instead of including <features.h>.
(open_wmemstream): Declare also if [__GLIBC_USE (LIB_EXT2)].
* manual/creature.texi (__STDC_WANT_LIB_EXT2__): Document macro.
Clear the destination buffer updated by the previous run in bench-memcpy.c
and test-memcpy.c to catch the error when the following implementations do
not copy anything.
[BZ #19907]
* benchtests/bench-memcpy.c (do_one_test): Clear the destination
buffer updated by the previous run.
* string/test-memcpy.c (do_one_test): Likewise.
* benchtests/bench-memmove.c (do_one_test): Add a comment.
* string/test-memmove.c (do_one_test): Likewise.
With now a faster strcspn implementation, it is faster to just use
it with some return tests than reimplementing strpbrk itself.
As for strcspn optimization, it is generally at least 10 times faster
than the existing implementation on bench-strspn on a few AArch64
implementations.
Also the string/bits/string2.h inlines make no longer sense, as current
implementation will already implement most of the optimizations.
Tested on x86_64, i386, and aarch64.
* string/strpbrk.c (strpbrk): Rewrite function.
* string/bits/string2.h (strpbrk): Use __builtin_strpbrk.
(__strpbrk_c2): Likewise.
(__strpbrk_c3): Likewise.
* string/string-inlines.c
[SHLIB_COMPAT(libc, GLIBC_2_1_1, GLIBC_2_24)] (__strpbrk_c2):
Likewise.
[SHLIB_COMPAT(libc, GLIBC_2_1_1, GLIBC_2_24)] (__strpbrk_c3):
Likewise.
As for strcspn, this patch improves strspn performance using a much
faster algorithm. It first constructs a 256-entry table based on
the accept string and then uses it as a lookup table for the
input string. As for strcspn optimization, it is generally at least
10 times faster than the existing implementation on bench-strspn
on a few AArch64 implementations.
Also the string/bits/string2.h inlines make no longer sense, as current
implementation will already implement most of the optimizations.
Tested on x86_64, i686, and aarch64.
* string/strspn.c (strcspn): Rewrite function.
* string/bits/string2.h (strspn): Use __builtin_strcspn.
(__strspn_c1): Remove inline function.
(__strspn_c2): Likewise.
(__strspn_c3): Likewise.
* string/string-inlines.c
[SHLIB_COMPAT(libc, GLIBC_2_1_1, GLIBC_2_24)] (__strspn_c1): Add
compatibility symbol.
[SHLIB_COMPAT(libc, GLIBC_2_1_1, GLIBC_2_24)] (__strspn_c2):
Likewise.
[SHLIB_COMPAT(libc, GLIBC_2_1_1, GLIBC_2_24)] (__strspn_c3):
Likewise.
Improve strcspn performance using a much faster algorithm. It is kept simple
so it works well on most targets. It is generally at least 10 times faster
than the existing implementation on bench-strcspn on a few AArch64
implementations, and for some tests 100 times as fast (repeatedly calling
strchr on a small string is extremely slow...).
In fact the string/bits/string2.h inlines make no longer sense, as GCC
already uses strlen if reject is an empty string, strchrnul is 5 times as
fast as __strcspn_c1, while __strcspn_c2 and __strcspn_c3 are slower than
the strcspn main loop for large strings (though reject length 2-4 could be
special cased in the future to gain even more performance).
Tested on x86_64, i686, and aarch64.
* string/Version (libc): Add GLIBC_2.24.
* string/strcspn.c (strcspn): Rewrite function.
* string/bits/string2.h (strcspn): Use __builtin_strcspn.
(__strcspn_c1): Remove inline function.
(__strcspn_c2): Likewise.
(__strcspn_c3): Likewise.
* string/string-inline.c
[SHLIB_COMPAT(libc, GLIBC_2_1_1, GLIBC_2_24)] (__strcspn_c1): Add
compatibility symbol.
[SHLIB_COMPAT(libc, GLIBC_2_1_1, GLIBC_2_24)] (__strcspn_c2):
Likewise.
[SHLIB_COMPAT(libc, GLIBC_2_1_1, GLIBC_2_24)] (__strcspn_c3):
Likewise.
* sysdeps/i386/string-inlines.c: Include generic string-inlines.c.
As discussed in
https://sourceware.org/ml/libc-alpha/2015-10/msg00403.html
the setting of _STRING_ARCH_unaligned currently controls the external
GLIBC ABI as well as selecting the use of unaligned accesses withing
GLIBC.
Since _STRING_ARCH_unaligned was recently changed for AArch64, this
would potentially break the ABI in GLIBC 2.23, so split the uses and add
_STRING_INLINE_unaligned to select the string ABI. This setting must be
fixed for each target, while _STRING_ARCH_unaligned may be changed from
release to release. _STRING_ARCH_unaligned is used unconditionally in
glibc. But <bits/string.h>, which defines _STRING_ARCH_unaligned, isn't
included with -Os. Since _STRING_ARCH_unaligned is internal to glibc and
may change between glibc releases, it should be made private to glibc.
_STRING_ARCH_unaligned should defined in the new string_private.h heade
file which is included unconditionally from internal <string.h> for glibc
build.
[BZ #19462]
* bits/string.h (_STRING_ARCH_unaligned): Renamed to ...
(_STRING_INLINE_unaligned): This.
* include/string.h: Include <string_private.h>.
* string/bits/string2.h: Replace _STRING_ARCH_unaligned with
_STRING_INLINE_unaligned.
* sysdeps/aarch64/bits/string.h (_STRING_ARCH_unaligned): Removed.
(_STRING_INLINE_unaligned): New.
* sysdeps/aarch64/string_private.h: New file.
* sysdeps/generic/string_private.h: Likewise.
* sysdeps/m68k/m680x0/m68020/string_private.h: Likewise.
* sysdeps/s390/string_private.h: Likewise.
* sysdeps/x86/string_private.h: Likewise.
* sysdeps/m68k/m680x0/m68020/bits/string.h
(_STRING_ARCH_unaligned): Renamed to ...
(_STRING_INLINE_unaligned): This.
* sysdeps/s390/bits/string.h (_STRING_ARCH_unaligned): Renamed
to ...
(_STRING_INLINE_unaligned): This.
* sysdeps/sparc/bits/string.h (_STRING_ARCH_unaligned): Renamed
to ...
(_STRING_INLINE_unaligned): This.
* sysdeps/x86/bits/string.h (_STRING_ARCH_unaligned): Renamed
to ...
(_STRING_INLINE_unaligned): This.
Building string/tst-endian.c with gcc 6 produces an build warning/error on s390 (big endian machine):
gcc tst-endian.c -c -std=gnu11 -fgnu89-inline -O2 or -O3 ...
tst-endian.c: In function ‘do_test’:
tst-endian.c:16:30: error: self-comparison always evaluates to false [-Werror=tautological-compare]
if (htobe16 (be16toh (i)) != i)
^~
...
See definitions of htobexx, bexxtoh in string/endian.h:
...
This patch silences these warnings with DIAG_* macros if build with gcc 6
and newer.
The same warnings occur on little endian machines with the
"htoleXX (leXXtoh (i)) != i" if-statements.
ChangeLog:
* string/tst-endian.c: Include <libc-internal.h>.
(do_test): Ignore tautological-compare warnings around
"htobeXX (beXXtoh (i)) != i" and
"htoleXX (leXXtoh (i)) != i" if-statements.
This automatically-generated patch converts 29 function definitions in
glibc (including one in an example in the manual) from old-style K&R
to prototype-style. Following my other recent such patches, this one
deals with the case of function definitions where one K&R parameter
declaration declares multiple parameters, as in:
void
foo (a, b)
int a, *b;
{
}
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* crypt/crypt.c (_ufc_doit_r): Convert to prototype-style function
definition.
(_ufc_doit_r): Likewise.
* crypt/crypt_util.c (_ufc_copymem): Likewise.
(_ufc_output_conversion_r): Likewise.
* inet/inet_mkadr.c (__inet_makeaddr): Likewise.
* inet/rcmd.c (rcmd_af): Likewise.
(rcmd): Likewise.
(ruserok_af): Likewise.
(ruserok): Likewise.
(ruserok2_sa): Likewise.
(ruserok_sa): Likewise.
(iruserok_af): Likewise.
(iruserok): Likewise.
(__ivaliduser): Likewise.
(__validuser2_sa): Likewise.
* inet/rexec.c (rexec_af): Likewise.
(rexec): Likewise.
* inet/ruserpass.c (ruserpass): Likewise.
* locale/programs/xmalloc.c (xcalloc): Likewise.
* manual/examples/timeval_subtract.c (timeval_subtract): Likewise.
* math/w_drem.c (__drem): Likewise.
* math/w_dremf.c (__dremf): Likewise.
* math/w_dreml.c (__dreml): Likewise.
* misc/daemon.c (daemon): Likewise.
* resolv/res_debug.c (p_fqnname): Likewise.
* stdlib/div.c (div): Likewise.
* string/memcmp.c (memcmp_bytes): Likewise.
* sunrpc/pmap_rmt.c (pmap_rmtcall): Likewise.
* sunrpc/svc_udp.c (svcudp_bufcreate): Likewise.
Fix the copyright year and remove contributed by in the
bug-strcoll2 test. In addition add the correct dependency
on $(gen-locales) to ensure all the test locales are generated.
The optimization introduced in commit
f13c2a8dff, causes regressions in
sorting for languages that have digraphs that change sort order, like
cs_CZ which sorts ch between h and i.
My analysis shows the fast-forwarding optimization in STRCOLL advances
through a digraph while possibly stopping in the middle which results
in a subsequent skipping of the digraph and incorrect sorting. The
optimization is incorrect as implemented and because of that I'm
removing it for 2.23, and I will also commit this fix for 2.22 where
it was originally introduced.
This patch reverts the optimization, introduces a new bug-strcoll2.c
regression test that tests both cs_CZ.UTF-8 and da_DK.ISO-8859-1 and
ensures they sort one digraph each correctly. The optimization can't be
applied without regressing this test.
Checked on x86_64, bug-strcoll2.c fails without this patch and passes
after. This will also get a fix on 2.22 which has the same bug.
This patch provides optimized versions of memccpy with the z13 vector
instructions.
ChangeLog:
* sysdeps/s390/multiarch/memccpy-c.c: New File.
* sysdeps/s390/multiarch/memccpy-vx.S: Likewise.
* sysdeps/s390/multiarch/memccpy.c: Likewise.
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Add memccpy functions.
* sysdeps/s390/multiarch/ifunc-impl-list-common.c
(__libc_ifunc_impl_list_common): Add ifunc test for memccpy.
* string/memccpy.c: Use MEMCCPY if defined.
This patch provides optimized versions of strcmp and wcscmp with the z13
vector instructions.
The architecture specific string.h had a typo, which leads to ommiting the
inline version in this file if __USE_STRING_INLINES is defined.
Tested this inline version by tweaking test-strcmp.c.
ChangeLog:
* sysdeps/s390/multiarch/strcmp-vx.S: New File.
* sysdeps/s390/multiarch/strcmp.c: Likewise.
* sysdeps/s390/multiarch/wcscmp-c.c: Likewise.
* sysdeps/s390/multiarch/wcscmp-vx.S: Likewise.
* sysdeps/s390/multiarch/wcscmp.c: Likewise.
* sysdeps/s390/s390-32/multiarch/strcmp.c: Likewise.
* sysdeps/s390/s390-64/multiarch/strcmp.c: Likewise.
* sysdeps/s390/multiarch/Makefile (sysdep_routines): Add strcmp and
wcscmp functions.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add ifunc test for strcmp, wcscmp.
* string/strcmp.c (STRCMP): Define and use macro.
* benchtests/bench-wcscmp.c: New File.
* benchtests/Makefile (wcsmbs-bench): Add wcscmp.
* sysdeps/s390/bits/string.h: Fix typo: _HAVE_STRING_ARCH_strcmp
instead of _HAVE_STRING_ARCH_memchr.
This patch provides optimized versions of strlen and wcslen with the z13 vector
instructions.
The helper macro IFUNC_VX_IMPL is introduced and is used to register all
__<func>_c() and __<func>_vx() functions within __libc_ifunc_impl_list()
to the ifunc test framework.
ChangeLog:
* sysdeps/s390/multiarch/Makefile: New File.
* sysdeps/s390/multiarch/strlen-c.c: Likewise.
* sysdeps/s390/multiarch/strlen-vx.S: Likewise.
* sysdeps/s390/multiarch/strlen.c: Likewise.
* sysdeps/s390/multiarch/wcslen-c.c: Likewise.
* sysdeps/s390/multiarch/wcslen-vx.S: Likewise.
* sysdeps/s390/multiarch/wcslen.c: Likewise.
* string/strlen.c (STRLEN): Define and use macro.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(IFUNC_VX_IMPL): New macro function.
(__libc_ifunc_impl_list): Add ifunc test for strlen, wcslen.
* benchtests/Makefile (wcsmbs-bench): New variable.
(string-bench-all): Added wcsmbs-bench.
* benchtests/bench-wcslen.c: New File.
I think the last clause of the conditional,
|| __n <= __bos (__dest)
may be backward. The code should call the runtime-checking function
if __n is not constant, or if __n is known to be LARGER than the size
of the destination.
This patches uses the default strcpy/stpcpy implementation for
POWER7/PPC64. This is faster in mostly inputs for benchtests
and for multiarch the implementation uses the POWER7 strlen and
memcpy.
* string/stpcpy.c (__stpcpy): Use STPCPY to redefine symbol name and
cleanup macro usage.
* string/strcpy.c (strcpt): Use STRCPY to redefine symbol name.
* sysdeps/powerpc/powerpc64/multiarch/stpcpy-power7.S: Remove file.
* sysdeps/powerpc/powerpc64/multiarch/stpcpy-ppc64.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strcpy-power7.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strcpy-ppc64.S: Likewise.
* sysdeps/powerpc/powerpc64/power7/stpcpy.S: Likewise.
* sysdeps/powerpc/powerpc64/power7/strcpy.S: Likewise.
* sysdeps/powerpc/powerpc64/power7/strcpy.c: Likewise.
* sysdeps/powerpc/powerpc64/stpcpy.S: Likewise.
* sysdeps/powerpc/powerpc64/strcpy.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/stpcpy.c
[SHARED && IS_IN (libc)]: Include <string/strcpy.c>.
* sysdeps/powerpc/powerpc64/multiarch/stpcpy.c
[SHARED && IS_IN (libc)]: Include <string/stpcpy.c>.
* sysdeps/powerpc/powerpc64/multiarch/stpcpy-power7.c: New file.
* sysdeps/powerpc/powerpc64/multiarch/stpcpy-ppc64.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strcpy-power7.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strcpy-ppc64.c: Likewise.
* sysdeps/powerpc/powerpc64/power7/strcpy.c: Likewise.
These tests were skipped by the use-test-skeleton conversion done in
commit 29955b5d because they did not have an `int main (void)'
declaration. Instead their `main' functions were declared with arguments
(i.e. argc, argv) even though they didn't use them.
Remove these arguments and include the test skeleton in these tests.
on bench-strncpy is 1.9-2.1x faster on average. I tried several variations, and using a tailcall and
calling memset conditionally gave the best overall results.
Various code in glibc uses __strnlen instead of strnlen for namespace
reasons. However, __strnlen does not use libc_hidden_proto /
libc_hidden_def (as is normally done for any function defined and
called within the same library, whether or not exported from the
library and whatever namespace it is in), so the compiler does not
know that those calls are to a function within libc.
This patch uses libc_hidden_proto / libc_hidden_def with __strnlen.
On x86_64, it makes no difference to the installed stripped shared
libraries. On 32-bit x86, it causes __strnlen calls to go to the same
place as strnlen calls (the fallback strnlen implementation), rather
than through a PLT entry for the strnlen IFUNC; I'm not sure of the
logic behind when calls from within libc should use IFUNCs versus when
they should go direct to a particular function implementation, but
clearly it doesn't make sense for strnlen and __strnlen to be handled
differently in this regard.
Tested for x86_64 and x86 (testsuite, and comparison of installed
shared libraries as described above).
* string/strnlen.c [!STRNLEN] (__strnlen): Use libc_hidden_def.
* include/string.h (__strnlen): Use libc_hidden_proto.
* sysdeps/aarch64/strnlen.S (__strnlen): Use libc_hidden_def.
* sysdeps/i386/i686/multiarch/strnlen-c.c [SHARED]
(libc_hidden_def): Define __GI___strnlen as well as __GI_strnlen.
* sysdeps/powerpc/powerpc32/power4/multiarch/strnlen-power7.S
(libc_hidden_def): Undefine and redefine.
* sysdeps/powerpc/powerpc32/power4/multiarch/strnlen-ppc32.c
[SHARED] (libc_hidden_def): Define __GI___strnlen as well as
__GI_strnlen.
* sysdeps/powerpc/powerpc32/power7/strnlen.S (__strnlen): Use
libc_hidden_def.
* sysdeps/tile/tilegx/strnlen.c (__strnlen): Likewise.
pathconf (sysdeps/unix/sysv/linux/pathconf.c) uses basename. But
pathconf is in POSIX back to 1990 while basename is only reserved with
external linkage in those standards including XPG functions. This
patch fixes this namespace issue in the usual way, renaming basename
to __basename and making it into a weak alias.
Tested for x86_64 and x86 (testsuite, and that disassembly of
installed shared libraries is unchanged by the patch).
[BZ #18444]
* string/basename.c (basename): Rename to __basename and define as
weak alias of __basename. Use libc_hidden_weak.
* include/string.h (__basename): Declare. Use libc_hidden_proto.
* sysdeps/unix/sysv/linux/pathconf.c (distinguish_extX): Call
__basename instead of basename.
* conform/Makefile (test-xfail-POSIX2008/unistd.h/linknamespace):
Remove variable.
(test-xfail-XOPEN2K8/unistd.h/linknamespace): Likewise.
[BZ #18206]
* wcsmbs/wcsncmp.c (wcsncmp): Compare as wchar_t, not wint_t.
Use signed comparision instead of substraction to avoid
overflow bug.
* localedata/tests-mbwc/tst_wcsncmp.c (tst_wcsncmp):
Take the sign of ret.
* localedata/tests-mbwc/dat_wcsncmp.c (tst_wcsncmp_loc):
Do not expect precise return values. Only the sign matters.
* wcsmbs/Makefile (strop-tests): Add wcsncmp.
* wcsmbs/test-wcsncmp.c: New File.
* string/test-strncmp.c: Add wcsncmp support.
[Modified from the original email by Siddhesh Poyarekar]
This patch solves bug #16009 by implementing an additional path in
strxfrm that does not depend on caching the weight and rule indices.
In detail the following changed:
* The old main loop was factored out of strxfrm_l into the function
do_xfrm_cached to be able to alternativly use the non-caching version
do_xfrm.
* strxfrm_l allocates a a fixed size array on the stack. If this is not
sufficiant to store the weight and rule indices, the non-caching path is
taken. As the cache size is not dependent on the input there can be no
problems with integer overflows or stack allocations greater than
__MAX_ALLOCA_CUTOFF. Note that malloc-ing is not possible because the
definition of strxfrm does not allow an oom errorhandling.
* The uncached path determines the weight and rule index for every char
and for every pass again.
* Passing all the locale data array by array resulted in very long
parameter lists, so I introduced a structure that holds them.
* Checking for zero src string has been moved a bit upwards, it is
before the locale data initialization now.
* To verify that the non-caching path works correct I added a test run
to localedata/sort-test.sh & localedata/xfrm-test.c where all strings
are patched up with spaces so that they are too large for the caching path.
gcc now warns when the arguments to memset may have been accidentally
transposed (i.e. length set to zero instead of the byte), so we don't
need that bit of the code in glibc headers anymore.
Tested on x86_64. Coe generated by gcc 4.8 is identical with or
without the patch. I also tested gcc master, which does not result in
any new failures. It does fail quite a few FORTIFY_SOURCE tests, but
those failures are not due to this patch.
TEST_IFUNC is only tested in two headers, bench-string.h and
test-string.h, after it gets defined by those headers, and it never
gets undefined.
Thus no defines of TEST_IFUNC are needed, and the *-ifunc.c tests that
just define TEST_IFUNC and include other tests are also redundant, as
is the code to remove $(tests-ifunc) and $(xtests-ifunc) conditionally
from tests and xtests. This patch removes the useless defines and
tests of TEST_IFUNC and the associated useless tests and makefile
code. It thereby fixes a series of warnings
"../string/test-string.h:21:0: warning: "TEST_IFUNC" redefined" where
test-string.h defines TEST_IFUNC to empty, other files define it to 1
and this produces warnings.
Tested for x86_64.
* debug/test-stpcpy_chk-ifunc.c: Remove file.
* debug/test-strcpy_chk-ifunc.c: Likewise.
* wcsmbs/test-wcschr-ifunc.c: Likewise.
* wcsmbs/test-wcscmp-ifunc.c: Likewise.
* wcsmbs/test-wcscpy-ifunc.c: Likewise.
* wcsmbs/test-wcslen-ifunc.c: Likewise.
* wcsmbs/test-wcsrchr-ifunc.c: Likewise.
* wcsmbs/test-wmemcmp-ifunc.c: Likewise.
* Rules [$(multi-arch) = no] (tests): Do not filter out
$(tests-ifunc).
[$(multi-arch) = no] (xtests): Do not filter out $(xtests-ifunc).
* debug/Makefile (tests-ifunc): Remove variable.
(tests): Do not add $(tests-ifunc).
* wcsmbs/Makefile (tests-ifunc): Remove variable.
(tests): Do not add $(tests-ifunc).
* benchtests/bench-string.h (TEST_IFUNC): Remove macro.
[TEST_IFUNC]: Remove conditionals.
* string/test-string.h (TEST_IFUNC): Remove macro.
[TEST_IFUNC]: Remove conditionals.
string/test-strchr.c is used for both wide and narrow string testing,
but produces a series of warnings for wide string testing because of
hardcoded use of narrow characters in the function check1. This patch
fixes that function to use macros abstracting away the wide / narrow
string choice, adding a new such macro to handle the string and
character constants.
Tested for x86_64.
* string/test-strchr.c [!WIDE] (L): New macro.
[WIDE] (L): Likewise.
(check1): Use CHAR instead of char. Use L on string and character
constants.
This patch fixes the build of C mempcpy and stpcpy by disabling the
redirection to __mempcpy and __stpcpy asm names if
NO_MEMPCPY_STPCPY_REDIRECT is defined, and defining that macro in the
relevant source files.
Tested for powerpc32 that the build is fixed.
* include/string.h [NO_MEMPCPY_STPCPY_REDIRECT] (mempcpy): Do not
redeclare with asm name.
[NO_MEMPCPY_STPCPY_REDIRECT] (stpcpy): Likewise.
* string/mempcpy.c (NO_MEMPCPY_STPCPY_REDIRECT): Define before
including <string.h>.
* string/stpcpy.c (NO_MEMPCPY_STPCPY_REDIRECT): Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/mempcpy.c
[!NOT_IN_libc] (NO_MEMPCPY_STPCPY_REDIRECT): Likewise.
* sysdeps/powerpc/powerpc64/multiarch/mempcpy.c
[!NOT_IN_libc] (NO_MEMPCPY_STPCPY_REDIRECT): Likewise.
* sysdeps/powerpc/powerpc64/multiarch/stpcpy.c
[SHARED && !NOT_IN_libc] (NO_MEMPCPY_STPCPY_REDIRECT): Likewise.
Locale code, brought in by ISO C functions, calls memmem, which is not
an ISO C function. This isn't an ISO C conformance bug, because all
mem* names are reserved, but glibc practice is not to rely on that
reservation (thus, memmem is only declared in string.h if __USE_GNU
even though ISO C would allow it to be declared unconditionally, for
example). This patch changes that code to use __memmem.
Note: there are uses of memmem elsewhere in glibc that I didn't
change, although it may turn out some of those also need to use
__memmem.
Tested for x86_64 (testsuite, and that disassembly of installed shared
libraries is unchanged by this patch).
[BZ #17585]
* string/memmem.c [!_LIBC] (__memmem): Define to memmem.
(memmem): Rename to __memmem and define as weak alias of
__memmem. Use libc_hidden_weak.
(__memmem): Use libc_hidden_def.
* include/string.h (__memmem): Declare. Use libc_hidden_proto.
* locale/findlocale.c (valid_locale_name): Use __memmem instead of
memmem.
Modifies the test examination in test-skeleton.c so that a test can be
successful if it is interrupted or it returns uninterrupted with the
expected status. For this both EXPECTED_SIGNAL and EXPECTED_STATUS
have to be set, as is done in tst-strcoll-overflow.c.
this
will improve performance even on targets which don't have an optimized strlen. It is about twice
as
fast as the original strncat in bench-strncat.
implementation, so this improves performance even on targets which don't have an optimized
strlen and strcpy - it is 25% faster in bench-strcat. On targets which don't provide an
optimized strcat but which do have an optimized strlen and strcpy, performance gain is > 2x.
this is a path that should solve bug 15884. It complains about the performance
of strcoll(). It was found out that the runtime of strcoll() is actually bound
to strlen which is needed for calculating the size of a cache that was
installed to improve the comparison performance.
The idea for this patch was that the cache is only useful in rare cases
(strings of same length and same first-level-chars) and that it would be
better to avoid memory allocation at all. To prove this I wrote a performance
test bench-strcoll.c with test data in benchtests-strcoll.tar.gz. Also
modifications in benchtests/Makefile and localedata/Makefile are necessary to
make it work.
After removing the cache the strcoll method showed the predicted behavior
(getting slightly faster) in all but the test case for hindi word sorting.
This was due the hindi text having much more equal words than the other ones.
For equal strings the performance was worse since all comparison levels were
run through and from the second level on the cache improved the comparison
performance of the original version.
Therefore I added a bytewise test via strcmp iff the first level comparison
found that both strings did match because in this case it is very likely that
equal strings are compared. This solved the problem with the hindi test case
and improved the performance of the others.
Performance comparison:
glibc files -33.77%
vi_VN.UTF-8 -34.12%
en_US.UTF-8 -42.42%
ar_SA.UTF-8 -27.49%
zh_CN.UTF-8 +07.90%
cs_CZ.UTF-8 -29.67%
en_GB.UTF-8 -28.50%
da_DK.UTF-8 -36.57%
pl_PL.UTF-8 -39.31%
fr_FR.UTF-8 -28.57%
pt_PT.UTF-8 -22.82%
el_GR.UTF-8 -26.77%
ru_RU.UTF-8 -35.81%
iw_IL.UTF-8 -35.34%
es_ES.UTF-8 -34.46%
hi_IN.UTF-8 -00.38%
sv_SE.UTF-8 -36.99%
hu_HU.UTF-8 -16.35%
tr_TR.UTF-8 -27.80%
is_IS.UTF-8 -33.24%
it_IT.UTF-8 -24.39%
sr_RS.UTF-8 -37.55%
ja_JP.UTF-8 +02.84%
This patch adds an optimized memmove optimization for POWER7/powerpc64.
Basically the idea is to use the memcpy for POWER7 on non-overlapped
memory regions and a optimized backward memcpy for memory regions
that overlap (similar to the idea of string/memmove.c).
The backward memcpy algorithm used is similar the one use for memcpy for
POWER7, with adjustments done for alignment. The difference is memory
is always aligned to 16 bytes before using VSX/altivec instructions.
Merge most of the gnulib implementation of memchr. The changes that
remain are:
- copyright header
- bp-sym.h removed
- reg_char removed
- allow MEMCHR to be redefined
- non-conforming whitespace changes
The merged code fixes a number of -Wundef warnings and also introduces
an optimized algorithm. I haven't detected any performance difference
in the new code which I believe is down to the quite specific
circumstances required to hit it. However the new code is approximately
half the size of the old code on AArch64 (which uses generic memchr).
ChangeLog:
2014-07-04 Will Newton <will.newton@linaro.org>
* string/memchr.c: Merge from gnulib.
[_LIBC]: Remove conditionals.
(__ptr_t): Remove define.
(LONG_MAX_32_BITS): Likewise.
(LONG_MAX): Likewise.
(MEMCHR): Use ANSI prototype and optimize algorithm.
The PAGE_COPY_THRESHOLD macro is meant to be overridden by
architecture-specific pagecopy.h, but it is currently done only by
mach; all other architectures use the default. Check to see if the
macro is defined in addition to whether it is set to a non-zero value.
Various glibc build / install / test code has C locale settings that
are redundant with LC_ALL=C.
LC_ALL takes precedence over LANG, so anywhere that sets LC_ALL=C
(explicitly, or through it being in the default environment for
running tests) does not need to set LANG=C. LC_ALL=C also takes
precedence over LANGUAGE, since
2001-01-02 Ulrich Drepper <drepper@redhat.com>
* intl/dcigettext.c (guess_category_value): Rewrite so that LANGUAGE
value is ignored if the selected locale is the C locale.
* intl/tst-gettext.c: Set locale for above change.
* intl/tst-translit.c: Likewise.
and so settings of LANGUAGE=C are also redundant when LC_ALL=C is
set. One test also had LC_ALL=C in its -ENV setting, although it's
part of the default environment used for tests.
This patch removes the redundant settings. It removes a suggestion in
install.texi of setting LANGUAGE=C LC_ALL=C for "make install"; the
Makefile.in target "install" already sets LC_ALL_C so there's no need
for the user to set it (and nor should there be any need for the user
to set it).
If some build machine tool used by "make install" uses a version of
libintl predating that 2001 change, and the user has LANGUAGE set, the
removal of LANGUAGE=C from the Makefile.in "install" rule could in
principle affect the user's installation. However, I don't think we
need to be concerned about pre-2001 build tools.
Tested x86_64.
* Makefile (install): Don't set LANGUAGE.
* Makefile.in (install): Likewise.
* assert/Makefile (test-assert-ENV): Remove variable.
(test-assert-perr-ENV): Likewise.
* elf/Makefile (neededtest4-ENV): Likewise.
* iconvdata/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Don't set LANGUAGE.
* io/ftwtest-sh (LANG): Remove variable.
* libio/Makefile (tst-widetext-ENV): Likewise.
* manual/install.texi (Running make install): Don't refer to
environment settings for make install.
* INSTALL: Regenerated.
* nptl/tst-tls6.sh: Don't set LANG.
* posix/globtest.sh (LANG): Remove variable.
* string/Makefile (tester-ENV): Likewise.
(inl-tester-ENV): Likewise.
(noinl-tester-ENV): Likewise.
* sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Don't set LANGUAGE.
* timezone/Makefile (build-testdata): Use $(built-program-cmd)
without explicit environment settings.
localedata/ChangeLog:
* tst-fmon.sh: Don't set LANGUAGE.
* tst-locale.sh: Likewise.
Tests run using the default $(make-test-out) automatically get
GCONV_PATH and LC_ALL set, whether or not those environment variables
are actually needed for the individual test. However, they do not get
LOCPATH set, meaning that a large number of tests have -ENV settings
just to set LOCPATH.
This patch moves LOCPATH into the default environment used for all
tests, on the principle that like GCONV_PATH any settings needed to
use files associated with the newly built library, rather than any old
installed files, are appropriate to use by default.
A further motivation is that various tests using .sh files also set
some combination of LC_ALL, GCONV_PATH and LOCPATH. Preferably .sh
files should also use the default environment with any additions
required for the individual test. Now, it was suggested in
<https://sourceware.org/ml/libc-alpha/2014-05/msg00715.html> that
various Makefile variables used in testing should be derived by
composing the -before-env and -after-env variables used when explicit
environment settings are required. With such a change, it's also
natural for those variables to include the default settings (via some
intermediate makefile variable also used in make-test-out).
Because some .sh files only set variables that correspond to the
default settings, or a subset thereof, and this applies to more of the
.sh files once LOCPATH is in the default settings, doing so reduces
the size of a revised version of
<https://sourceware.org/ml/libc-alpha/2014-05/msg00596.html>: scripts
only needing the (expanded) default settings will not need to receive
the separate -before-env and -after-env variables, only the single
variable they do at present. So moving LOCPATH into the default
settings can reduce churn caused by subsequent patches.
Tested x86_64 and x86.
* Rules (make-test-out): Include
LOCPATH=$(common-objpfx)localedata in default environment.
* debug/Makefile (tst-chk1-ENV): Remove variable.
(tst-chk2-ENV): Likewise.
(tst-chk3-ENV): Likewise.
(tst-chk4-ENV): Likewise.
(tst-chk5-ENV): Likewise.
(tst-chk6-ENV): Likewise.
(tst-lfschk1-ENV): Likewise.
(tst-lfschk2-ENV): Likewise.
(tst-lfschk3-ENV): Likewise.
(tst-lfschk4-ENV): Likewise.
(tst-lfschk5-ENV): Likewise.
(tst-lfschk6-ENV): Likewise.
* iconvdata/Makefile (bug-iconv6-ENV): Likewise.
(tst-iconv7-ENV): Likewise.
* intl/Makefile (LOCPATH-ENV): Likewise.
(tst-codeset-ENV): Likewise.
(tst-gettext3-ENV): Likewise.
(tst-gettext5-ENV): Likewise.
* libio/Makefile (tst-widetext-ENV): Don't set LOCPATH.
(tst-fopenloc-ENV): Likewise.
(tst-fgetws-ENV): Remove variable.
(tst-ungetwc1-ENV): Likewise.
(tst-ungetwc2-ENV): Likewise.
(bug-ungetwc2-ENV): Likewise.
(tst-swscanf-ENV): Likewise.
(bug-ftell-ENV): Likewise.
(tst-fgetwc-ENV): Likewise.
(tst-fseek-ENV): Likewise.
(tst-ftell-partial-wide-ENV): Likewise.
(tst-ftell-active-handler-ENV): Likewise.
(tst-ftell-append-ENV): Likewise.
* posix/Makefile (tst-fnmatch-ENV): Likewise.
(tst-regexloc-ENV): Likewise.
(bug-regex1-ENV): Likewise.
(tst-regex-ENV): Likewise.
(tst-regex2-ENV): Likewise.
(bug-regex5-ENV): Likewise.
(bug-regex6-ENV): Likewise.
(bug-regex17-ENV): Likewise.
(bug-regex18-ENV): Likewise.
(bug-regex19-ENV): Likewise.
(bug-regex20-ENV): Likewise.
(bug-regex22-ENV): Likewise.
(bug-regex23-ENV): Likewise.
(bug-regex25-ENV): Likewise.
(bug-regex26-ENV): Likewise.
(bug-regex30-ENV): Likewise.
(bug-regex32-ENV): Likewise.
(bug-regex33-ENV): Likewise.
(bug-regex34-ENV): Likewise.
(bug-regex35-ENV): Likewise.
(tst-rxspencer-ENV): Likewise.
(tst-rxspencer-no-utf8-ENV): Likewise.
* stdio-common/Makefile (tst-sprintf-ENV): Likewise.
(tst-sscanf-ENV): Likewise.
(tst-swprintf-ENV): Likewise.
(tst-swscanf-ENV): Likewise.
(test-vfprintf-ENV): Likewise.
(scanf13-ENV): Likewise.
(bug14-ENV): Likewise.
(tst-grouping-ENV): Likewise.
* stdlib/Makefile (tst-strtod-ENV): Likewise.
(tst-strtod3-ENV): Likewise.
(tst-strtod4-ENV): Likewise.
(tst-strtod5-ENV): Likewise.
(testmb2-ENV): Likewise./
* string/Makefile (tst-strxfrm-ENV): Likewise.
(tst-strxfrm2-ENV): Likewise.
(bug-strcoll1-ENV): Likewise.
(test-strcasecmp-ENV): Likewise.
(test-strncasecmp-ENV): Likewise.
* time/Makefile (tst-strptime-ENV): Likewise.
(tst-ftime_l-ENV): Likewise.
* wcsmbs/Makefile (tst-btowc-ENV): Likewise.
(tst-mbrtowc-ENV): Likewise.
(tst-wcrtomb-ENV): Likewise.
(tst-mbrtowc2-ENV): Likewise.
(tst-c16c32-1-ENV): Likewise.
(tst-mbsnrtowcs-ENV): Likewise.
localedata/ChangeLog:
* Makefile (TEST_MBWC_ENV): Remove variable.
(tst_iswalnum-ENV): Likewise.
(tst_iswalpha-ENV): Likewise.
(tst_iswcntrl-ENV): Likewise.
(tst_iswctype-ENV): Likewise.
(tst_iswdigit-ENV): Likewise.
(tst_iswgraph-ENV): Likewise.
(tst_iswlower-ENV): Likewise.
(tst_iswprint-ENV): Likewise.
(tst_iswpunct-ENV): Likewise.
(tst_iswspace-ENV): Likewise.
(tst_iswupper-ENV): Likewise.
(tst_iswxdigit-ENV): Likewise.
(tst_mblen-ENV): Likewise.
(tst_mbrlen-ENV): Likewise.
(tst_mbrtowc-ENV): Likewise.
(tst_mbsrtowcs-ENV): Likewise.
(tst_mbstowcs-ENV): Likewise.
(tst_mbtowc-ENV): Likewise.
(tst_strcoll-ENV): Likewise.
(tst_strfmon-ENV): Likewise.
(tst_strxfrm-ENV): Likewise.
(tst_swscanf-ENV): Likewise.
(tst_towctrans-ENV): Likewise.
(tst_towlower-ENV): Likewise.
(tst_towupper-ENV): Likewise.
(tst_wcrtomb-ENV): Likewise.
(tst_wcscat-ENV): Likewise.
(tst_wcschr-ENV): Likewise.
(tst_wcscmp-ENV): Likewise.
(tst_wcscoll-ENV): Likewise.
(tst_wcscpy-ENV): Likewise.
(tst_wcscspn-ENV): Likewise.
(tst_wcslen-ENV): Likewise.
(tst_wcsncat-ENV): Likewise.
(tst_wcsncmp-ENV): Likewise.
(tst_wcsncpy-ENV): Likewise.
(tst_wcspbrk-ENV): Likewise.
(tst_wcsrtombs-ENV): Likewise.
(tst_wcsspn-ENV): Likewise.
(tst_wcsstr-ENV): Likewise.
(tst_wcstod-ENV): Likewise.
(tst_wcstok-ENV): Likewise.
(tst_wcstombs-ENV): Likewise.
(tst_wcswidth-ENV): Likewise.
(tst_wcsxfrm-ENV): Likewise.
(tst_wctob-ENV): Likewise.
(tst_wctomb-ENV): Likewise.
(tst_wctrans-ENV): Likewise.
(tst_wctype-ENV): Likewise.
(tst_wcwidth-ENV): Likewise.
(tst-digits-ENV): Likewise.
(tst-mbswcs6-ENV): Likewise.
(tst-xlocale1-ENV): Likewise.
(tst-xlocale2-ENV): Likewise.
(tst-strfmon1-ENV): Likewise.
(tst-strptime-ENV): Likewise.
(tst-setlocale-ENV): Don't set LOCPATH.
(bug-iconv-trans-ENV): Remove variable.
(tst-sscanf-ENV): Likewise.
(tst-leaks-ENV): Don't set LOCPATH.
(bug-setlocale1-ENV): Remove variable.
(bug-setlocale1-static-ENV): Likewise.
(tst-setlocale2-ENV): Likewise.
[BZ #16885]
* sysdeps/sparc/sparc64/strcmp.S: Fix end comparison handling when
multiple zero bytes exist at the end of a string.
Reported by Aurelien Jarno <aurelien@aurel32.net>
* string/test-strcmp.c (check): Add explicit test for situations where
there are multiple zero bytes after the first.
Clean up string functions that do not have a version in gnulib on
the assumption that glibc is the canonical upstream copy of this
code. basename has a copy in gnulib but it is largely written to
handle Windows paths so merging it is not really viable. The changes
mostly consist of switching to ANSI function prototypes and removing
unused includes.
As many of these functions do not get built in a typical build due
to architecture optimized versions being used instead I built these
by hand to verify there were no build warnings and the code was
identical.
2014-04-07 Will Newton <will.newton@linaro.org>
* string/basename.c [HAVE_CONFIG_H]: Remove #ifdef and
and contents. [!_LIBC] Remove #ifndef and contents.
(basename): Use ANSI prototype. [_LIBC] Remove #idef.
* string/memccpy.c (__memccpy): Use ANSI prototype.
* string/memfrob.c (memfrob): Likewise.
* string/strcoll.c (STRCOLL): Likewise.
* string/strlen.c (strlen): Likewise.
* string/strtok.c (STRTOK): Likewise.
* string/strcat.c: Remove unused #include of memcopy.h.
(strcat): Use ANSI prototype.
* string/strchr.c: Remove unused #include of memcopy.h.
(strchr): Use ANSI prototype.
* string/strcmp.c: Remove unused #include of memcopy.h.
(strcmp): Use ANSI prototype.
* string/strcpy.c: Remove unused #include of memcopy.h.
(strcpy): Use ANSI prototype.
This patch add an optimized strpbrk for POWER7 by using a different
algorithm than default implementation: it constructs a table based on
the 'accept' argument and use this table to check for any occurance on
the input string. The idea is similar as x86_64 uses.
For PowerPC some tunings were added, such as unroll loops and memory
clear using VSX instructions.
This patch add a optimized strcspn for POWER7 by using a different
algorithm than default implementation: it constructs a table based on
the 'accept' argument and use this table to check for any occurance
on the input string. The idea is similar as x86_64 uses.
For PowerPC some tunings were added, such as unroll loops and align
stack memory to table to 16 bytes (so VSX clean can ran without
alignment issues).
The optimization is achieved by following techniques:
> hashing of needle.
> hashing avoids scanning of duplicate entries in needle across the string.
> initializing the hash table with Vector instructions (VSX) by quadword access.
> unrolling when scanning for character in string across hash table.
This patch is a revised and updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>.
In order to generate overall summaries of the results of all tests in
the glibc testsuite, we need to identify and concatenate the files
with the results of individual tests.
Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this.
However, the normal glibc approach is explicit enumeration of the
expected set of files with a given property, rather than all files
matching some pattern like that. Furthermore, we would like to be
able to mark tests as UNRESOLVED if the file with their results is for
some reason missing, and in future we would like to be able to mark
tests as UNSUPPORTED if they are disabled for a particular
configuration (rather than simply having them missing from the list of
tests as at present). Such handling of tests that were not run or did
not record results requires an explicit enumeration of tests.
For the tests following the default makefile rules, $(tests) (and
$(xtests)) provides such an enumeration. Others, however, are added
directly as dependencies of the "tests" and "xtests" makefile
targets. This patch changes the makefiles to put them in variables
tests-special and xtests-special, with appropriate dependencies on the
tests listed there then being added centrally.
Those variables are used in Rules and so need to be set before Rules
is included in a subdirectory makefile, which is often earlier in the
makefile than the dependencies were present before. We previously
discussed the question of where to include Rules; see the question at
<https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a
discussion in
<https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why
Rules is included early rather than late in subdirectory makefiles.
It was necessary to avoid an indirection through the check-abi target
and get the check-abi-* targets for individual libraries into the
tests-special variable. The intl/ test $(objpfx)tst-gettext.out,
previously built only because of dependencies from other tests, was
also added to tests-special for the same reason.
The entries in tests-special are the full makefile targets, complete
with $(objpfx) and .out. If a future change causes tests to be named
consistently with a .out suffix, this can be changed to include just
the path relative to $(objpfx), without .out.
Tested x86_64, including that the same set of files is generated in
the build directory by a build and testsuite run both before and after
the patch (except for changes to the
elf/tst-null-argv.debug.out.<number> file name), and a build with
run-built-tests=no to verify there aren't any more obvious instances
of the issue Marcus Shawcroft reported with a previous version in
<https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>.
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(tests): Depend on $(tests-special).
* Makerules (check-abi-list): New variable.
(check-abi): Depend on $(check-abi-list).
[$(subdir) = elf] (tests-special): Add
$(objpfx)check-abi-libc.out.
[$(build-shared) = yes && subdir] (tests-special): Add
$(check-abi-list).
[$(build-shared) = yes && subdir] (tests): Do not depend on
check-abi.
* Rules (tests): Depend on $(tests-special).
(xtests): Depend on $(xtests-special).
* catgets/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* conform/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* elf/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* grp/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* iconv/Makefile (xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* iconvdata/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* intl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable. Also add
$(objpfx)tst-gettext.out.
* io/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* libio/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* malloc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* misc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl_db/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* posix/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* resolv/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* stdio-common/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(do-tst-unbputc): Remove target.
(do-tst-printf): Likewise.
* stdlib/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* string/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* sysdeps/x86/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
localedata:
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
This patch optimizes strrchr() for ppc64. It uses aligned memory
access along with cmpb instruction and CPU prefetch to avoid
cache misses for speed improvement.
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I
noted it was necessary to add includes of Makeconfig early in various
subdirectory makefiles for the tests-special variable settings added
by that patch to be conditional on configuration information. No-one
commented on the general question there of whether Makeconfig should
always be included immediately after the definition of subdir.
This patch implements that early inclusion of Makeconfig in each
directory (which is a lot easier than consistent placement of includes
of Rules). Includes are added if needed, or moved up if already
present. Subdirectory "all:" targets are removed, since Makeconfig
provides one.
There is potential for further cleanups I haven't done. Rules and
Makerules have code such as
ifneq "$(findstring env,$(origin headers))" ""
headers :=
endif
to override to empty any value of various variables that came from the
environment. I think there is a case for Makeconfig setting all the
subdirectory variables (other than subdir) to empty to ensure no
outside value is going to take effect if a subdirectory fails to
define a variable. (A list of such variables, possibly out of date
and incomplete, is in manual/maint.texi.) Rules and Makerules would
give errors if Makeconfig hadn't already been included, instead of
including it themselves. The special code to override values coming
from the environment would then be obsolete and could be removed.
Tested x86_64, including that installed binaries are identical before
and after the patch.
* argp/Makefile: Include Makeconfig immediately after defining
subdir.
* assert/Makefile: Likewise.
* benchtests/Makefile: Likewise.
* catgets/Makefile: Likewise.
* conform/Makefile: Likewise.
* crypt/Makefile: Likewise.
* csu/Makefile: Likewise.
(all): Remove target.
* ctype/Makefile: Include Makeconfig immediately after defining
subdir.
* debug/Makefile: Likewise.
* dirent/Makefile: Likewise.
* dlfcn/Makefile: Likewise.
* gmon/Makefile: Likewise.
* gnulib/Makefile: Likewise.
* grp/Makefile: Likewise.
* gshadow/Makefile: Likewise.
* hesiod/Makefile: Likewise.
* hurd/Makefile: Likewise.
(all): Remove target.
* iconvdata/Makefile: Include Makeconfig immediately after
defining subdir.
* inet/Makefile: Likewise.
* intl/Makefile: Likewise.
* io/Makefile: Likewise.
* libio/Makefile: Likewise.
(all): Remove target.
* locale/Makefile: Include Makeconfig immediately after defining
subdir.
* login/Makefile: Likewise.
* mach/Makefile: Likewise.
(all): Remove target.
* malloc/Makefile: Include Makeconfig immediately after defining
subdir.
(all): Remove target.
* manual/Makefile: Include Makeconfig immediately after defining
subdir.
* math/Makefile: Likewise.
* misc/Makefile: Likewise.
* nis/Makefile: Likewise.
* nss/Makefile: Likewise.
* po/Makefile: Likewise.
(all): Remove target.
* posix/Makefile: Include Makeconfig immediately after defining
subdir.
* pwd/Makefile: Likewise.
* resolv/Makefile: Likewise.
* resource/Makefile: Likewise.
* rt/Makefile: Likewise.
* setjmp/Makefile: Likewise.
* shadow/Makefile: Likewise.
* signal/Makefile: Likewise.
* socket/Makefile: Likewise.
* soft-fp/Makefile: Likewise.
* stdio-common/Makefile: Likewise.
* stdlib/Makefile: Likewise.
* streams/Makefile: Likewise.
* string/Makefile: Likewise.
* sunrpc/Makefile: Likewise.
(all): Remove target.
* sysvipc/Makefile: Include Makeconfig immediately after defining
subdir.
* termios/Makefile: Likewise.
* time/Makefile: Likewise.
* timezone/Makefile: Likewise.
(all): Remove target.
* wcsmbs/Makefile: Include Makeconfig immediately after defining
subdir.
* wctype/Makefile: Likewise.
libidn/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
localedata/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
(all): Remove target.
nptl/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
nptl_db/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
This patch splits makefile rules that generate a file then run cmp to
check the contents of that file into separate rules to generate and
compare the file. This simplifies making those tests generate PASS /
FAIL results, by removing the need to insert && between commands in
the test so that a $(evaluate-test) call is reached. It also avoids
the oddity of the .out file being an intermediate file rather than the
final result generated, as noted for some of these tests in
<https://sourceware.org/ml/libc-alpha/2012-10/msg00894.html>.
In many cases, the rule to run the program was no longer needed
because the default rules for running test programs on the host to
generate a .out file sufficed. (I'm not asserting the commands run
after this patch are *exactly* the same as before, simply that the
rules did nothing special that appeared deliberate or relevant to
anything about what the tests were testing. In cases where the rules
redirected stderr as well as stdout, I left the existing rule's
redirection in place to avoid changing what gets compared with the
expected results.)
It's clear there is a lot in common between the various -cmp.out rules
and it might be possible in future to refactor them into more generic
support for the case of comparing test output against a baseline.
(Some baselines are *.exp, some *.expect, some directly embedded in
the makefiles, and nptl/tst-cleanupx0.expect appears unused.)
Tested x86_64.
* elf/Makefile ($(objpfx)order.out): Remove rule.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)order-cmp.out.
($(objpfx)order-cmp.out): New rule.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)tst-array1-cmp.out, $(objpfx)tst-array1-static-cmp.out,
$(objpfx)tst-array2-cmp.out, $(objpfx)tst-array3-cmp.out,
$(objpfx)tst-array4-cmp.out, $(objpfx)tst-array5-cmp.out and
$(objpfx)tst-array5-static-cmp.out.
($(objpfx)tst-array1.out): Remove rule.
($(objpfx)tst-array1-cmp.out): New rule.
($(objpfx)tst-array1-static.out): Remove rule.
($(objpfx)tst-array1-static-cmp.out): New rule.
($(objpfx)tst-array2.out): Remove rule.
($(objpfx)tst-array2-cmp.out): New rule.
($(objpfx)tst-array3.out): Remove rule.
($(objpfx)tst-array3-cmp.out): New rule.
($(objpfx)tst-array4.out): Remove rule.
($(objpfx)tst-array4-cmp.out): New rule.
($(objpfx)tst-array5.out): Remove rule.
($(objpfx)tst-array5-cmp.out): New rule.
($(objpfx)tst-array5-static.out): Remove rule.
($(objpfx)tst-array5-static-cmp.out): New rule.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)order2-cmp.out.
($(objpfx)order2.out): Remove rule.
($(objpfx)order2-cmp.out): New rule.
($(objpfx)tst-initorder.out): Remove rule.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)tst-initorder-cmp.out.
($(objpfx)tst-initorder-cmp.out): New rule.
($(objpfx)tst-initorder2.out): Remove rule.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)tst-initorder2-cmp.out.
($(objpfx)tst-initorder2-cmp.out): New rule.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)tst-unused-dep-cmp.out.
($(objpfx)tst-unused-dep-cmp.out): Do not run cmp.
($(objpfx)tst-unused-dep-cmp.out): New rule.
* stdio-common/Makefile [$(run-built-tests) = yes] (tests): Depend
on $(objpfx)tst-setvbuf1-cmp.out.
($(objpfx)tst-setvbuf1.out): Do not run cmp.
($(objpfx)tst-setvbuf1-cmp.out): New rule.
* string/Makefile [$(run-built-tests) = yes] (tests): Depend
$(objpfx)tst-svc-cmp.out instead of $(objpfx)tst-svc.out.
($(objpfx)tst-svc.out): Remove rule.
($(objpfx)tst-svc-cmp.out): New rule.
nptl:
* Makefile ($(objpfx)tst-cleanup0.out): Do not run cmp.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)tst-cleanup0-cmp.out.
($(objpfx)tst-cleanup0-cmp.out): New rule.
This patch cleans up cases of __USE_MISC that are trivially redundant
after the recent substitution of __USE_MISC for __USE_BSD and
__USE_SVID: either in constructs such as "defined __USE_MISC ||
defined __USE_MISC", or else (in the bits/mman.h case) a conditional
on __USE_MISC nested inside another __USE_MISC conditional. (The
cleanups remaining after this patch are still quite large, but it
seems a reasonable piece to separate out.)
Tested x86_64.
* bits/mman.h [__USE_MISC]: Remove redundant conditionals.
* ctype/ctype.h [__USE_MISC]: Likewise.
* dirent/dirent.h [__USE_MISC]: Likewise.
* grp/grp.h [__USE_MISC]: Likewise.
* io/fcntl.h [__USE_MISC]: Likewise.
* io/sys/stat.h [__USE_MISC]: Likewise.
* libio/stdio.h [__USE_MISC]: Likewise.
* posix/unistd.h [__USE_MISC]: Likewise.
* pwd/pwd.h [__USE_MISC]: Likewise.
* stdlib.h [__USE_MISC]: Likewise.
* string/bits/string2.h [__USE_MISC]: Likewise.
* string/string.h [__USE_MISC]: Likewise.
* time/time.h [__USE_MISC]: Likewise.
In the string/string.h and string/strings.h headers, we have a couple
of macros that "tell the caller that we provide correct C++
prototypes" according to the comment; they are used to determine
whether to wrap some prototypes in "extern "C++"" (and provide
multiple overloads of them, and some other magic) when __cplusplus is
defined.
The macros are set to check for sufficiently-recent GCC versions (4.4
and later), but this is not the right check for non-GCC compilers. In
particular, these macros should also be set when using Clang -- if
they are not set, then Clang will be unable to correctly diagnose a
number of subtle bugs that will be errors in GCC compilations.
As per discussion on earlier versions of this patch, rather than
restrict the fix to Clang per se, we assume that all C++ compilers that
claim to fully support C++98 are using a standard-conforming C++
standard library, which seems pretty reasonable. Clang has been
providing an appropriate value of __cplusplus since May 2012.
http://sourceware.org/ml/libc-alpha/2013-08/msg00095.html
I found this useful at one stage when I was seeing a huge number of
memrchr failures all of test number 10.
* string/tester.c (test_memrchr): Increment reported test cycle.
http://sourceware.org/ml/libc-alpha/2013-08/msg00094.html
Using plain %s here runs the risk of segfaulting when displaying the
string. src and dst aren't zero terminated strings.
* string/test-memcpy.c (do_one_test): When reporting errors, print
string address and don't overrun end of string.
strcoll is implemented using a cache for indices and weights of
collation sequences in the strings so that subsequent passes do not
have to search through collation data again. For very large string
inputs, the cache size computation could overflow. In such a case,
use the fallback function that does not cache indices and weights of
collation sequences.
Fixes CVE-2012-4412.
strcoll currently falls back to alloca if malloc fails, resulting in a
possible stack overflow. This patch implements sequence traversal and
comparison without caching indices and rules.
Fixes CVE-2012-4424.
