This patch updates the timezone code from tzcode 2014e (the previous
version used was 2013i).
Tested x86_64.
* timezone/checktab.awk: Update from tzcode 2014e.
* timezone/private.h: Likewise.
* timezone/tzfile.h: Likewise.
* timezone/zdump.c: Likewise.
* timezone/zic.c: Likewise.
Various glibc build / install / test code has C locale settings that
are redundant with LC_ALL=C.
LC_ALL takes precedence over LANG, so anywhere that sets LC_ALL=C
(explicitly, or through it being in the default environment for
running tests) does not need to set LANG=C. LC_ALL=C also takes
precedence over LANGUAGE, since
2001-01-02 Ulrich Drepper <drepper@redhat.com>
* intl/dcigettext.c (guess_category_value): Rewrite so that LANGUAGE
value is ignored if the selected locale is the C locale.
* intl/tst-gettext.c: Set locale for above change.
* intl/tst-translit.c: Likewise.
and so settings of LANGUAGE=C are also redundant when LC_ALL=C is
set. One test also had LC_ALL=C in its -ENV setting, although it's
part of the default environment used for tests.
This patch removes the redundant settings. It removes a suggestion in
install.texi of setting LANGUAGE=C LC_ALL=C for "make install"; the
Makefile.in target "install" already sets LC_ALL_C so there's no need
for the user to set it (and nor should there be any need for the user
to set it).
If some build machine tool used by "make install" uses a version of
libintl predating that 2001 change, and the user has LANGUAGE set, the
removal of LANGUAGE=C from the Makefile.in "install" rule could in
principle affect the user's installation. However, I don't think we
need to be concerned about pre-2001 build tools.
Tested x86_64.
* Makefile (install): Don't set LANGUAGE.
* Makefile.in (install): Likewise.
* assert/Makefile (test-assert-ENV): Remove variable.
(test-assert-perr-ENV): Likewise.
* elf/Makefile (neededtest4-ENV): Likewise.
* iconvdata/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Don't set LANGUAGE.
* io/ftwtest-sh (LANG): Remove variable.
* libio/Makefile (tst-widetext-ENV): Likewise.
* manual/install.texi (Running make install): Don't refer to
environment settings for make install.
* INSTALL: Regenerated.
* nptl/tst-tls6.sh: Don't set LANG.
* posix/globtest.sh (LANG): Remove variable.
* string/Makefile (tester-ENV): Likewise.
(inl-tester-ENV): Likewise.
(noinl-tester-ENV): Likewise.
* sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Don't set LANGUAGE.
* timezone/Makefile (build-testdata): Use $(built-program-cmd)
without explicit environment settings.
localedata/ChangeLog:
* tst-fmon.sh: Don't set LANGUAGE.
* tst-locale.sh: Likewise.
One wart in the original support for test wrappers for cross testing,
as noted in
<https://sourceware.org/ml/libc-alpha/2012-10/msg00722.html>, is the
requirement for test wrappers to pass a poorly-defined set of
environment variables from the build system to the system running the
glibc under test. Although some variables are passed explicitly via
$(test-wrapper-env), including LD_* variables that simply can't be
passed implicitly because of the side effects they'd have on the build
system's dynamic linker, others are passed implicitly, including
variables such as GCONV_PATH and LOCPATH that could potentially affect
the build system's libc (so effectively relying on any such effects
not breaking the wrappers). In addition, the code in
cross-test-ssh.sh for preserving environment variables is fragile (it
depends on how bash formats a list of exported variables, and could
well break for multi-line variable definitions where the contents
contain things looking like other variable definitions).
This patch moves to explicitly passing environment variables via
$(test-wrapper-env). Makefile variables that previously used
$(test-wrapper) are split up into -before-env and -after-env parts
that can be passed separately to the various .sh files used in
testing, so those files can then insert environment settings between
the two parts.
The common default environment settings in make-test-out are made into
a separate makefile variable that can also be passed to scripts,
rather than many scripts duplicating those settings (for testing an
installed glibc, it is desirable to have the GCONV_PATH setting on
just one place, so just that one place needs to support it pointing to
an installed sysroot instead of the build tree). The default settings
are included in the variables such as $(test-program-prefix), so that
if tests do not need any non-default settings they can continue to use
single variables rather than the split-up variables.
Although this patch cleans up LC_ALL=C settings (that being part of
the common defaults), various LANG=C and LANGUAGE=C settings remain.
Those are generally unnecessary and I propose a subsequent cleanup to
remove them. LC_ALL takes precedence over LANG, and while LANGUAGE
takes precedence over LC_ALL, it only does so for settings other than
LC_ALL=C. So LC_ALL=C on its own is sufficient to ensure the C
locale, and anything that gets LC_ALL=C does not need the other
settings.
While preparing this patch I noticed some tests with .sh files that
appeared to do nothing beyond what the generic makefile support for
tests can do (localedata/tst-wctype.sh - the makefiles support -ENV
variables and .input files - and localedata/tst-mbswcs.sh - just runs
five tests that could be run individually from the makefile). So I
propose another subsequent cleanup to move those to using the generic
support instead of special .sh files.
Tested x86_64 (native) and powerpc32 (cross).
* Makeconfig (run-program-env): New variable.
(run-program-prefix-before-env): Likewise.
(run-program-prefix-after-env): Likewise.
(run-program-prefix): Define in terms of new variables.
(built-program-cmd-before-env): New variable.
(built-program-cmd-after-env): Likewise.
(built-program-cmd): Define in terms of new variables.
(test-program-prefix-before-env): New variable.
(test-program-prefix-after-env): Likewise.
(test-program-prefix): Define in terms of new variables.
(test-program-cmd-before-env): New variable.
(test-program-cmd-after-env): Likewise.
(test-program-cmd): Define in terms of new variables.
* Rules (make-test-out): Use $(run-program-env).
* scripts/cross-test-ssh.sh (env_blacklist): Remove variable.
(help): Do not mention environment variables. Mention
--timeoutfactor option.
(timeoutfactor): New variable.
(blacklist_exports): Remove function.
(exports): Remove variable.
(command): Do not include ${exports}.
* manual/install.texi (Configuring and compiling): Do not mention
test wrappers preserving environment variables. Mention that last
assignment to a variable must take precedence.
* INSTALL: Regenerated.
* benchtests/Makefile (run-bench): Use $(run-program-env).
* catgets/Makefile ($(objpfx)test1.cat): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
($(objpfx)test2.cat): Do not specify environment variables
explicitly.
($(objpfx)de/libc.cat): Use $(built-program-cmd-before-env),
$(run-program-env) and $(built-program-cmd-after-env).
($(objpfx)test-gencat.out): Use $(test-program-cmd-before-env),
$(run-program-env) and $(test-program-cmd-after-env).
($(objpfx)sample.SJIS.cat): Do not specify environment variables
explicitly.
* catgets/test-gencat.sh: Use test_program_cmd_before_env,
run_program_env and test_program_cmd_after_env arguments.
* elf/Makefile ($(objpfx)tst-pathopt.out): Use $(run-program-env).
* elf/tst-pathopt.sh: Use run_program_env argument.
* iconvdata/Makefile ($(objpfx)iconv-test.out): Use
$(test-wrapper-env) and $(run-program-env).
* iconvdata/run-iconv-test.sh: Use test_wrapper_env and
run_program_env arguments.
* iconvdata/tst-table.sh: Do not set GCONV_PATH explicitly.
* intl/Makefile ($(objpfx)tst-gettext.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
($(objpfx)tst-gettext2.out): Likewise.
* intl/tst-gettext.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* intl/tst-gettext2.sh: Likewise.
* intl/tst-gettext4.sh: Do not set environment variables
explicitly.
* intl/tst-gettext6.sh: Likewise.
* intl/tst-translit.sh: Likewise.
* malloc/Makefile ($(objpfx)tst-mtrace.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* malloc/tst-mtrace.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* math/Makefile (run-regen-ulps): Use $(run-program-env).
* nptl/Makefile ($(objpfx)tst-tls6.out): Use $(run-program-env).
* nptl/tst-tls6.sh: Use run_program_env argument. Set LANG=C
explicitly with each use of ${test_wrapper_env}.
* posix/Makefile ($(objpfx)wordexp-tst.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* posix/tst-getconf.sh: Do not set environment variables
explicitly.
* posix/wordexp-tst.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* stdio-common/tst-printf.sh: Do not set environment variables
explicitly.
* stdlib/Makefile ($(objpfx)tst-fmtmsg.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* stdlib/tst-fmtmsg.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
Split $test calls into $test_pre and $test.
* timezone/Makefile (build-testdata): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
localedata/ChangeLog:
* Makefile ($(addprefix $(objpfx),$(CTYPE_FILES))): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
($(objpfx)sort-test.out): Use $(test-program-prefix-before-env),
$(run-program-env) and $(test-program-prefix-after-env).
($(objpfx)tst-fmon.out): Use $(run-program-prefix-before-env),
$(run-program-env) and $(run-program-prefix-after-env).
($(objpfx)tst-locale.out): Use $(built-program-cmd-before-env),
$(run-program-env) and $(built-program-cmd-after-env).
($(objpfx)tst-trans.out): Use $(run-program-prefix-before-env),
$(run-program-env), $(run-program-prefix-after-env),
$(test-program-prefix-before-env) and
$(test-program-prefix-after-env).
($(objpfx)tst-ctype.out): Use $(test-program-cmd-before-env),
$(run-program-env) and $(test-program-cmd-after-env).
($(objpfx)tst-wctype.out): Likewise.
($(objpfx)tst-langinfo.out): Likewise.
($(objpfx)tst-langinfo-static.out): Likewise.
* gen-locale.sh: Use localedef_before_env, run_program_env and
localedef_after_env arguments.
* sort-test.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* tst-ctype.sh: Use tst_ctype_before_env, run_program_env and
tst_ctype_after_env arguments.
* tst-fmon.sh: Use run_program_prefix_before_env, run_program_env
and run_program_prefix_after_env arguments.
* tst-langinfo.sh: Use tst_langinfo_before_env, run_program_env
and tst_langinfo_after_env arguments.
* tst-locale.sh: Use localedef_before_env, run_program_env and
localedef_after_env arguments.
* tst-mbswcs.sh: Do not set environment variables explicitly.
* tst-numeric.sh: Likewise.
* tst-rpmatch.sh: Likewise.
* tst-trans.sh: Use run_program_prefix_before_env,
run_program_env, run_program_prefix_after_env,
test_program_prefix_before_env and test_program_prefix_after_env
arguments.
* tst-wctype.sh: Use tst_wctype_before_env, run_program_env and
tst_wctype_after_env arguments.
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00198.html> I
raised the question of counting miscellaneous dependencies of tests,
built on the host rather than the build system, as tests, so that when
test failures don't stop "make check" neither do those other builds on
the host, so that a flaky host doesn't stop "make check" from
producing a complete summary of test results. Brooks supported that
idea in <https://sourceware.org/ml/libc-alpha/2014-02/msg00301.html>.
This patch implements that change for all the examples I could find:
one message catalog in catgets/, locales in localedata/ and timezone
files in timezone/.
Tested x86_64.
* catgets/Makefile (tests-special): Add $(objpfx)sample.SJIS.cat.
($(objpfx)sample.SJIS.cat): Use $(evaluate-test).
* timezone/Makefile (testdata): Move definition above include of
Rules.
(test-zones): New variable.
(tests-special): Add zone files.
(build-testdata): Use $(evaluate-test).
localedata/ChangeLog:
* Makefile (LOCALES): Move definition above include of Rules.
(LOCALE_SRCS): Likewise.
(CHARMAPS): Likewise.
(CTYPE_FILES): Likewise.
(tests-special): Add locale files.
($(addprefix $(objpfx),$(CTYPE_FILES))): Use $(evaluate-test).
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I
noted it was necessary to add includes of Makeconfig early in various
subdirectory makefiles for the tests-special variable settings added
by that patch to be conditional on configuration information. No-one
commented on the general question there of whether Makeconfig should
always be included immediately after the definition of subdir.
This patch implements that early inclusion of Makeconfig in each
directory (which is a lot easier than consistent placement of includes
of Rules). Includes are added if needed, or moved up if already
present. Subdirectory "all:" targets are removed, since Makeconfig
provides one.
There is potential for further cleanups I haven't done. Rules and
Makerules have code such as
ifneq "$(findstring env,$(origin headers))" ""
headers :=
endif
to override to empty any value of various variables that came from the
environment. I think there is a case for Makeconfig setting all the
subdirectory variables (other than subdir) to empty to ensure no
outside value is going to take effect if a subdirectory fails to
define a variable. (A list of such variables, possibly out of date
and incomplete, is in manual/maint.texi.) Rules and Makerules would
give errors if Makeconfig hadn't already been included, instead of
including it themselves. The special code to override values coming
from the environment would then be obsolete and could be removed.
Tested x86_64, including that installed binaries are identical before
and after the patch.
* argp/Makefile: Include Makeconfig immediately after defining
subdir.
* assert/Makefile: Likewise.
* benchtests/Makefile: Likewise.
* catgets/Makefile: Likewise.
* conform/Makefile: Likewise.
* crypt/Makefile: Likewise.
* csu/Makefile: Likewise.
(all): Remove target.
* ctype/Makefile: Include Makeconfig immediately after defining
subdir.
* debug/Makefile: Likewise.
* dirent/Makefile: Likewise.
* dlfcn/Makefile: Likewise.
* gmon/Makefile: Likewise.
* gnulib/Makefile: Likewise.
* grp/Makefile: Likewise.
* gshadow/Makefile: Likewise.
* hesiod/Makefile: Likewise.
* hurd/Makefile: Likewise.
(all): Remove target.
* iconvdata/Makefile: Include Makeconfig immediately after
defining subdir.
* inet/Makefile: Likewise.
* intl/Makefile: Likewise.
* io/Makefile: Likewise.
* libio/Makefile: Likewise.
(all): Remove target.
* locale/Makefile: Include Makeconfig immediately after defining
subdir.
* login/Makefile: Likewise.
* mach/Makefile: Likewise.
(all): Remove target.
* malloc/Makefile: Include Makeconfig immediately after defining
subdir.
(all): Remove target.
* manual/Makefile: Include Makeconfig immediately after defining
subdir.
* math/Makefile: Likewise.
* misc/Makefile: Likewise.
* nis/Makefile: Likewise.
* nss/Makefile: Likewise.
* po/Makefile: Likewise.
(all): Remove target.
* posix/Makefile: Include Makeconfig immediately after defining
subdir.
* pwd/Makefile: Likewise.
* resolv/Makefile: Likewise.
* resource/Makefile: Likewise.
* rt/Makefile: Likewise.
* setjmp/Makefile: Likewise.
* shadow/Makefile: Likewise.
* signal/Makefile: Likewise.
* socket/Makefile: Likewise.
* soft-fp/Makefile: Likewise.
* stdio-common/Makefile: Likewise.
* stdlib/Makefile: Likewise.
* streams/Makefile: Likewise.
* string/Makefile: Likewise.
* sunrpc/Makefile: Likewise.
(all): Remove target.
* sysvipc/Makefile: Include Makeconfig immediately after defining
subdir.
* termios/Makefile: Likewise.
* time/Makefile: Likewise.
* timezone/Makefile: Likewise.
(all): Remove target.
* wcsmbs/Makefile: Include Makeconfig immediately after defining
subdir.
* wctype/Makefile: Likewise.
libidn/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
localedata/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
(all): Remove target.
nptl/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
nptl_db/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
Now we have Paul's support for version-3 tz files checked in, this
patch updates all the code we take (unmodified) from tzcode to version
2013i (which includes the support for generating version-3 tz files
where necessary).
Tested x86_64.
* timezone/checktab.awk: Update from tzcode 2013i.
* timezone/private.h: Likewise.
* timezone/scheck.c: Likewise.
* timezone/tzfile.h: Likewise.
* timezone/tzselect.ksh: Likewise.
* timezone/zdump.c: Likewise.
* timezone/zic.c: Likewise.
* time/tzset.c (tzset_internal): Break TZ string parsing out into
__tzset_parse_tz and updating of daylight, timezone, tzname into
update_vars.
(__tz_compute): Renamed from tz_compute. Take additional parameters.
(__tz_convert): Updating of tm_isdst, tm_zone, and tm_gmtoff now
happens in __tz_compute.
* time/tzfile.c (__tzfile_read): Also read TZ string.
(find_transition): Fold into __tzfile_compute.
(__tzfile_compute): For times beyond the last transition try to
use the TZ string.
* timezone/tst-timezone.c: Information in daylight and tzname does
change for Asia/Tokyo timezone with more concrete information.
Remove the test.
* include/stdio.h: Add libc_hidden_proto for ftello.
* libio/ftello.c: Add libc_hidden_def.
void **.
* nss/nsswitch.h (service_user): Use void * type for KNOWN field.
* nss/nss_files/files-hosts.c (LINE_PARSER): Cast host_addr to
char * to avoid warning.
* nis/nss_nis/nis-hosts.c (LINE_PARSER): Likewise.
* timezone/Makefile (CFLAGS-zdump.c): Add -fwrapv.
* locale/programs/ld-ctype.c (ctype_finish, set_class_defaults,
allocate_arrays): Cast second argument to charmap_find_symbol
to char * to avoid warnings.
* locale/programs/repertoire.c (repertoire_new_char): Change
from_nr, to_nr and cnt to unsigned long, adjust printf format
string.
* locale/programs/ld-collate.c (insert_value, handle_ellipsis):
Cast second argument to new_element to char * to avoid warnings.
* locale/weightwc.h (findidx): Cast &extra[-i] to const int32_t *.
* intl/gettextP.h (struct loaded_domain): Change plural to const
struct expression *.
* intl/plural-eval.c (plural_eval): Change first argument to
const struct expression *.
* intl/plural-exp.c (EXTRACT_PLURAL_EXPRESSION): Change first
argument to const struct expression **.
* intl/plural-exp.h (EXTRACT_PLURAL_EXPRESSION, plural_eval): Adjust
prototypes.
* intl/loadmsgcat (_nl_unload_domain): Cast away const
in call to __gettext_free_exp.
* posix/fnmatch.c (fnmatch): Rearrange code to avoid maybe
unitialized wstring/wpattern var warnings.
* posix/runtests.c (struct a_test): Make data field const char *.
* stdio-common/tst-sprintf2.c (main): Don't declere u, v and buf
vars if not LDBL_MANT_DIG >= 106.
* stdio-common/Makefile (CFLAGS-vfwprintf.c): Add -Wno-unitialized.
* stdio-common/vfprintf.c (vfprintf): Cast first arugment to
__find_specmb to avoid warning.
* rt/tst-mqueue1.c (do_one_test): Add casts to avoid warnings.
* debug/test-strcpy_chk.c (do_tests, do_random_tests): Add casts
to avoid warnings.
* sysdeps/ieee754/ldbl-96/s_roundl.c (huge): Add L suffix to
initializer.
* sysdeps/unix/clock_gettime.c (clock_gettime): Only define
tv var when it will be actually used.
* sunrpc/rpc_cmsg.c (xdr_callmsg): Cast IXDR_PUT_* to void
to avoid warnings.
2005-12-19 Ulrich Drepper <drepper@redhat.com>
[BZ #1955]
* timezone/zic.c (tofile;): Fix typo in symlink creation.
Patch by Phil Estes <pestes@us.ibm.com>.
[BZ #1952]
* sysdeps/unix/sysv/linux/time.c: New file.
* sysdeps/unix/sysv/linux/i386/syscalls.list: Remove time entry.
2005-12-15 Thomas Schwinge <tschwinge@gnu.org>
2002-02-25 Paul Eggert <eggert@twinsun.com>
* timezone/Makefile (tzbases): Move systemv from here...
(tzlinks): to here, since the entries in systemv were all changed
from Zone to Link lines in tz-2001a. Bug reported (and patch
tested) by Peter Breitenlohner.
* iconvdata/ibm1129.h: Remove duplicate mappings.
* iconvdata/ibm937.c: Handle overflow errors. Handle new tables.
* iconvdata/ibm937.h: Reorganize table to safe a lot of space.
Patch by Masahide Washizawa <WASHI@jp.ibm.com>.
* timezone/zic.c: Fix handling of turnaround times.
Patch by Arthur David Olson <olsona@dc37a.nci.nih.gov>.
2001-12-02 Moshe Olshansky <OLSHANSK@il.ibm.com>
* sysdeps/ieee754/dbl-64/e_remainder.c (__ieee754_remainder): Fix
overflow problem.
2001-12-05 Ulrich Drepper <drepper@redhat.com>
* posix/regex.c: For use outside glibc defined bounded pointer
macros here. Patch by Jim Meyering <jim@meyering.net>.
2001-08-29 Ulrich Drepper <drepper@redhat.com>
* nis/nis_findserv.c (__nis_findfastest): Don't fail if reply received
first is from a previous call.
Patch by Alexander Belopolsky <alexb@rentec.com> for [PR libc/3670].
2001-08-29 Andreas Schwab <schwab@suse.de>
* sysdeps/ia64/fpu/libm-test-ulps: Updated.
2001-08-25 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
* config.make.in (INSTALL_SCRIPT): Define.
* Makeconfig (INSTALL_SCRIPT): Define.
* Makerules (do-install-script): New macro to install scripts using
INSTALL_SCRIPT.
(install-bin-script): New rule to install scripts with
do-install-script.
(install-bin-script-nosubdir): New rule.
(install-no-libc.a-nosubdir): Add install-bin-script-nosubdir.
(distinfo-vars): Add $(install-bin-script).
* Rules (others): Likewise.
* Makefile (glibcbug): Install with install-bin-script.
* debug/Makefile (xtrace): Likewise.
(catchsegv): Likewise.
* elf/Makefile (ldd): Likewise.
* malloc/Makefile (mtrace): Likewise.
* timezone/Makefile (tzselect): Likewise.
2001-08-29 H.J. Lu <hjl@gnu.org>
* sysdeps/mips/dl-machine.h (__dl_runtime_resolve): Pass
ELF_RTYPE_CLASS_PLT, instead of R_MIPS_REL32, to
_dl_lookup_versioned_symbol () and _dl_lookup_symbol ().
Add it to LDFLAGS.so, LDFLAGS-rtld, and +link.
2001-07-06 Paul Eggert <eggert@twinsun.com>
* manual/argp.texi: Remove ignored LGPL copyright notice; it's
not appropriate for documentation anyway.
* manual/libc-texinfo.sh: "Library General Public License" ->
"Lesser General Public License".
2001-07-06 Andreas Jaeger <aj@suse.de>
* All files under GPL/LGPL version 2: Place under LGPL version
2.1.
2000-12-16 Ulrich Drepper <drepper@redhat.com>
* timezone/asia: Update from tzdata2000h.
* timezone/australasia: Likewise.
* timezone/backward: Likewise.
* timezone/europe: Likewise.
* timezone/northamerica: Likewise.
* timezone/southamerica: Likewise.
* timezone/zone.tab: Likewise.
2000-12-14 Jakub Jelinek <jakub@redhat.com>
* io/ftw.c (ftw_dir): If process_entry returned non-zero result
and dir.stream is NULL, only free dir.content.
* io/ftwtest.c (cb, main): Add --early-exit option to test it.
* io/ftwtest-sh: Test with --early-exit.
2000-10-22 Bruno Haible <haible@clisp.cons.org>
* iconvdata/big5hkscs.c (big5hkscs_to_ucs): Add irreversible mappings
for 0x8BF8, 0xA27E..0xA2A7.
* iconvdata/BIG5HKSCS.irreversible: New file.
2000-10-23 Jakub Jelinek <jakub@redhat.com>
* timezone/zdump.c (main): setlocale LC_CTYPE as well as LC_MESSAGES.
* timezone/zic.c (main): Likewise.
2000-10-23 Thorsten Kukuk <kukuk@suse.de>
* nscd/connections.c (invalidate_cache): Don't invalidate a cache
if it is not enabled.
2000-10-16 Ulrich Drepper <drepper@redhat.com>
* timezone/Makefile: Define HAVE_GETTEXT fir zdump.c, zic.c,
ialloc.c, and scheck.c.
* malloc/obstack.c: Always include <libintl.h> for glibc.
* posix/getopt.c: Likewise.
Reported by Petr Vandrovec <VANDROVE@vc.cvut.cz>.
* timezone/Makefile (build-testdata): Set LANGUAGE and LC_ALL
since zic uses setlocale and gettext but we cannot make it use the
new locale data since zic calls a shell which might not use the
new libc.
1999-11-09 Ulrich Drepper <drepper@cygnus.com>
* elf/dl-load.c (_dl_dst_count): Allow $ORIGIN to point to
directory with the reference since this is as secure as using the
object with the dependency.
(_dl_dst_substitute): Likewise.
* elf/dl-load.c (_dl_dst_count): Change strings in first two
strncmp calls to allow reuse.
(_dl_dst_substitute): Likewise.
1999-11-01 Arnold D. Robbins <arnold@skeeve.com>
* posix/regex.c (init_syntax_once): move below definition of
ISALNUM etc., then use ISALNUM to init the table, so that
the word ops will work if i18n'ed.
(SYNTAX): And subscript with 0xFF for 8bit character sets.
1999-11-09 Andreas Jaeger <aj@suse.de>
* sysdeps/unix/getlogin_r.c (getlogin_r): Sync with getlogin
implementation for ttyname_r call; fix inverted condition; return
ut_user. Closes PR libc/1438.
1999-11-09 Ulrich Drepper <drepper@cygnus.com>
* timezone/checktab.awk: Update from tzcode1999h.
* timezone/africa: Update from tzdata1999i.
* timezone/asia: Likewise.
* timezone/australasia: Likewise.
* timezone/backward: Likewise.
* timezone/europe: Likewise.
* timezone/northamerica: Likewise.
* timezone/southamerica: Likewise.
* timezone/iso3166.tab: Likewise.
* timezone/zone.tab: Likewise.
* sysdeps/unix/sysv/linux/bits/resource.h: Define values also as
macros. Patch by brg@csua.berkeley.edu [PR libc/1439].
1999-11-09 Andreas Jaeger <aj@suse.de>
* posix/Makefile (tests): Added tst-getlogin.
* posix/tst-getlogin.c: New file, contains simple tests for
getlogin and getlogin_r.
1999-11-09 Andreas Schwab <schwab@suse.de>
* misc/syslog.c: For LOG_PERROR only append a newline if
necessary.
1999-10-04 Andreas Jaeger <aj@suse.de>
* timezone/README: Change wording to not mention the current
version. This way we can't forget to update the file.
1999-10-04 Andreas Jaeger <aj@suse.de>
* manual/time.texi (Basic CPU Time): Fix typo.
Reported by Ben Pfaff <pfaffben@msu.edu>.
1999-10-04 Ulrich Drepper <drepper@cygnus.com>
* string/string.h: Move __memrchr declaration to ...
* include/string.h: ...here.
* db2/db_int.h: Change tsl_t type to u_int32_t.
* db2/mutex/mutex.c: Allow Alpha mutex definitions.
* db2/mutex/alpha.h: New file.
* db2/mutex/sparc.gcc: Fix store code for v9. Simplify clear code.
* sysdeps/alpha/Makefile [db2]: Set CFLAGS of mutex.c to make spinlocks
known.
Patches by Richard Henderson.
1999-05-02 H.J. Lu <hjl@gnu.org>
* timezone/zic.c (dolink): Remove the symlink destination first.
* catgets/open_catalog.c (__open_catalog): Set catalog->status
to "nonexisting" if failed to open the file.
