It follows the internal signature:
extern int clone3 (struct clone_args *__cl_args, size_t __size,
int (*__func) (void *__arg), void *__arg);
Checked on mips64el-linux-gnueabihf, mips64el-n32-linux-gnu, and
mipsel-linux-gnu.
It follows the internal signature:
extern int clone3 (struct clone_args *__cl_args, size_t __size,
int (*__func) (void *__arg), void *__arg);
Checked on arm-linux-gnueabihf.
The wiki page https://sourceware.org/glibc/wiki/Proposals/C.UTF-8
says that "Setting LC_ALL=C.UTF-8 will ignore LANGUAGE just like it
does with LC_ALL=C." This patch implements it.
* intl/dcigettext.c (guess_category_value): Treat C.<encoding> locale
like the C locale.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
In short: __tls_get_addr checks the global generation counter and if
the current dtv is older then _dl_update_slotinfo updates dtv up to the
generation of the accessed module. So if the global generation is newer
than generation of the module then __tls_get_addr keeps hitting the
slow dtv update path. The dtv update path includes a number of checks
to see if any update is needed and this already causes measurable tls
access slow down after dlopen.
It may be possible to detect up-to-date dtv faster. But if there are
many modules loaded (> TLS_SLOTINFO_SURPLUS) then this requires at
least walking the slotinfo list.
This patch tries to update the dtv to the global generation instead, so
after a dlopen the tls access slow path is only hit once. The modules
with larger generation than the accessed one were not necessarily
synchronized before, so additional synchronization is needed.
This patch uses acquire/release synchronization when accessing the
generation counter.
Note: in the x86_64 version of dl-tls.c the generation is only loaded
once, since relaxed mo is not faster than acquire mo load.
I have not benchmarked this. Tested by Adhemerval Zanella on aarch64,
powerpc, sparc, x86 who reported that it fixes the performance issue
of bug 19924.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The old Intel software developer manual specified that the low byte of
EAX of CPUID leaf 2 returned 1 which indicated the number of rounds of
CPUDID leaf 2 was needed to retrieve the complete cache information. The
newer Intel manual has been changed to that it should always return 1
and be ignored. If the lower byte isn't 1, CPUID leaf 2 can't be used.
In this case, we ignore CPUID leaf 2 and use CPUID leaf 4 instead. If
CPUID leaf 4 doesn't contain the cache information, cache information
isn't available at all. This addresses BZ #30643.
This patch makes build-many-glibcs.py use the new GMP 6.3.0 and MPFR
4.2.1 releases.
Tested with build-many-glibcs.py (host-libraries, compilers and glibcs
builds).
Add common emojis to the translit-able characters (mostly
faces and hearts), and translit them to old-fashioned
smileys.
Signed-off-by: Colin Leroy-Mira <colin@colino.net>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Previously, if an entry was marked unusable for any reason, but had
not timed out yet, the assert would trigger.
One way to get into such state is if a data change is detected during
re-validation of an entry. This causes the entry to be marked as not
usable. If exits nscd soon after that, then the clock jumps
backwards, and nscd restarted, the cache re-validation run after
startup triggers the removed assert.
The change is more complicated than just the removal of the assert
because entries marked as not usable should be garbage-collected in
the second pass. To make this happen, it is necessary to update some
book-keeping data.
Reviewed-by: DJ Delorie <dj@redhat.com>
According to glibc memcmp microbenchmark test results(Add generic
memcmp), this implementation have performance improvement
except the length is less than 3, details as below:
Name Percent of time reduced
memcmp-lasx 16%-74%
memcmp-lsx 20%-50%
memcmp-aligned 5%-20%
According to glibc memset microbenchmark test results, for LSX and LASX
versions, A few cases with length less than 8 experience performace
degradation, overall, the LASX version could reduce the runtime about
15% - 75%, LSX version could reduce the runtime about 15%-50%.
The unaligned version uses unaligned memmory access to set data which
length is less than 64 and make address aligned with 8. For this part,
the performace is better than aligned version. Comparing with the generic
version, the performance is close when the length is larger than 128. When
the length is 8-128, the unaligned version could reduce the runtime about
30%-70%, the aligned version could reduce the runtime about 20%-50%.
According to glibc memrchr microbenchmark, this implementation could reduce
the runtime as following:
Name Percent of rutime reduced
memrchr-lasx 20%-83%
memrchr-lsx 20%-64%
According to glibc memchr microbenchmark, this implementation could reduce
the runtime as following:
Name Percent of runtime reduced
memchr-lasx 37%-83%
memchr-lsx 30%-66%
memchr-aligned 0%-15%
According to glibc rawmemchr microbenchmark, A few cases tested with
char '\0' experience performance degradation due to the lasx and lsx
versions don't handle the '\0' separately. Overall, rawmemchr-lasx
implementation could reduce the runtime about 40%-80%, rawmemchr-lsx
implementation could reduce the runtime about 40%-66%, rawmemchr-aligned
implementation could reduce the runtime about 20%-40%.
We are requiring Binutils >= 2.41, so explicit relocation syntax is
always supported by the assembler. Use it to reduce one instruction.
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
This patch adds the new F_SEAL_EXEC constant from Linux 6.3 (see Linux
commit 6fd7353829c ("mm/memfd: add F_SEAL_EXEC") to bits/fcntl-linux.h.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Even though the alloca usage is relatively small and fixed size the code
can be written without using alloca. Convert to local variables.
Checked on x86_64-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Convert to scratch_buffers to avoid potential stack overflow.
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch adds a new macro, M68K_SCALE_AVAILABLE, similar to gmp
scale_available_p (mpn/m68k/m68k-defs.m4) that expand to 1 if a
scale factor can be used in addressing modes. This is used
instead of __mc68020__ for some optimization decisions.
Checked on a build for m68k-linux-gnu target mc68020 and mc68040.
GCC currently does not define __mc68020__ for -mcpu=68040 or higher,
which memcpy/memmove assumptions. Since this memory copy optimization
seems only intended for m68020, disable for other m680X0 variants.
Checked on a build for m68k-linux-gnu target mc68020 and mc68040.
Parts of elf/tst-rtld-list-diagnostics.py have been copied from
scripts/tst-ld-trace.py.
The abnf module is entirely optional and used to verify the
ABNF grammar as included in the manual.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Based on the glibc microbenchmark, only a few short inputs with this
strncmp-aligned and strncmp-lsx implementation experience performance
degradation, overall, strncmp-aligned could reduce the runtime 0%-10%
for aligned comparision, 10%-25% for unaligend comparision, strncmp-lsx
could reduce the runtime about 0%-60%.
Based on the glibc microbenchmark, strcmp-aligned implementation could
reduce the runtime 0%-10% for aligned comparison, 10%-20% for unaligned
comparison, strcmp-lsx implemenation could reduce the runtime 0%-50%.
Based on the glibc microbenchmark, strnlen-aligned implementation could
reduce the runtime more than 10%, strnlen-lsx implementation could reduce
the runtime about 50%-78%, strnlen-lasx implementation could reduce the
runtime about 50%-88%.
The path auxv[*].a_val could either be an integer or a string,
depending on the a_type value. Use a separate field, a_val_string, to
simplify mechanical parsing of the --list-diagnostics output.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
On Skylake, it changes log1p bench performance by:
Before After Improvement
max 63.349 58.347 8%
min 4.448 5.651 -30%
mean 12.0674 10.336 14%
The minimum code path is
if (hx < 0x3FDA827A) /* x < 0.41422 */
{
if (__glibc_unlikely (ax >= 0x3ff00000)) /* x <= -1.0 */
{
...
}
if (__glibc_unlikely (ax < 0x3e200000)) /* |x| < 2**-29 */
{
math_force_eval (two54 + x); /* raise inexact */
if (ax < 0x3c900000) /* |x| < 2**-54 */
{
...
}
else
return x - x * x * 0.5;
FMA and non-FMA code sequences look similar. Non-FMA version is slightly
faster. Since log1p is called by asinh and atanh, it improves asinh
performance by:
Before After Improvement
max 75.645 63.135 16%
min 10.074 10.071 0%
mean 15.9483 14.9089 6%
and improves atanh performance by:
Before After Improvement
max 91.768 75.081 18%
min 15.548 13.883 10%
mean 18.3713 16.8011 8%
When building with fortify enabled, GCC < 12 issues a warning on the
fortify strncat wrapper might overflow the destination buffer (the
failure is tied to -Werror).
Checked on ppc64 and x86_64.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The static PIE configure check uses link tests. When bootstrapping
a cross-toolchain, the link tests fail due to missing crt-files /
libc.so. As we explicitely want to test an issue in binutils (ld),
we now also explicitely check for known linker versions.
See also commit 368b7c614b
S390: Use compile-only instead of also link-tests in configure.
