No bug. The way wcsnlen will check if near the end of maxlen
is the following macro:
mov %r11, %rsi; \
subq %rax, %rsi; \
andq $-64, %rax; \
testq $-64, %rsi; \
je L(strnlen_ret)
Which words independently of s + maxlen overflowing. So the
second overflow check is unnecissary for correctness and
just extra overhead in the common no overflow case.
test-strlen.c, test-wcslen.c, test-strnlen.c and test-wcsnlen.c are
all passing
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
This commit fixes the bug mentioned in the previous commit.
The previous implementations of wmemchr in these files relied
on maxlen * sizeof(wchar_t) which was not guranteed by the standard.
The new overflow tests added in the previous commit now
pass (As well as all the other tests).
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
This commit fixes the bug mentioned in the previous commit.
The previous implementations of wmemchr in these files relied
on n * sizeof(wchar_t) which was not guranteed by the standard.
The new overflow tests added in the previous commit now
pass (As well as all the other tests).
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
No bug. This comment adds the ifunc / build infrastructure
necessary for wcslen to prefer the sse4.1 implementation
in strlen-vec.S. test-wcslen.c is passing.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Since strlen.S contains SSE2 version of strlen/strnlen and SSE4.1
version of wcslen/wcsnlen, move strlen.S to multiarch/strlen-vec.S
and include multiarch/strlen-vec.S from SSE2 and SSE4.1 variants.
This also removes the unused symbols, __GI___strlen_sse2 and
__GI___wcsnlen_sse4_1.
1. Replace
if ((((uintptr_t) &_d) & (__alignof (double) - 1)) != 0)
which may be optimized out by compiler, with
int
__attribute__ ((weak, noclone, noinline))
is_aligned (void *p, int align)
{
return (((uintptr_t) p) & (align - 1)) != 0;
}
2. Add TEST_STACK_ALIGN_INIT to TEST_STACK_ALIGN.
3. Add a common TEST_STACK_ALIGN_INIT to check 16-byte stack alignment
for both i386 and x86-64.
4. Update powerpc to use TEST_STACK_ALIGN_INIT.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
No bug. This commit makes a few small improvements to
memset-vec-unaligned-erms.S. The changes are 1) only aligning to 64
instead of 128. Either alignment will perform equally well in a loop
and 128 just increases the odds of having to do an extra iteration
which can be significant overhead for small values. 2) Align some
targets and the loop. 3) Remove an ALU from the alignment process. 4)
Reorder the last 4x VEC so that they are stored after the loop. 5)
Move the condition for leq 8x VEC to before the alignment
process. test-memset and test-wmemset are both passing.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
No bug. This commit optimizes memcmp-evex.S. The optimizations include
adding a new vec compare path for small sizes, reorganizing the entry
control flow, removing some unnecissary ALU instructions from the main
loop, and most importantly replacing the heavy use of vpcmp + kand
logic with vpxor + vptern. test-memcmp and test-wmemcmp are both
passing.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
No bug. This commit optimizes memcmp-avx2.S. The optimizations include
adding a new vec compare path for small sizes, reorganizing the entry
control flow, and removing some unnecissary ALU instructions from the
main loop. test-memcmp and test-wmemcmp are both passing.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
This is a follow up patch to the fix for bug 19329. This adds relaxed
MO atomics to accesses that were previously data races but are now
race conditions, and where relaxed MO is sufficient.
The race conditions all follow the pattern that the write is behind the
dlopen lock, but a read can happen concurrently (e.g. during tls access)
without holding the lock. For slotinfo entries the read value only
matters if it reads from a synchronized write in dlopen or dlclose,
otherwise the related dtv entry is not valid to access so it is fine
to leave it in an inconsistent state. The same applies for
GL(dl_tls_max_dtv_idx) and GL(dl_tls_generation), but there the
algorithm relies on the fact that the read of the last synchronized
write is an increasing value.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
No bug.
This commit adds a new implementation for EVEX memchr that is not safe
for RTM because it uses vzeroupper. The benefit is that by using
ymm0-ymm15 it can use vpcmpeq and vpternlogd in the 4x loop which is
faster than the RTM safe version which cannot use vpcmpeq because
there is no EVEX encoding for the instruction. All parts of the
implementation aside from the 4x loop are the same for the two
versions and the optimization is only relevant for large sizes.
Tigerlake:
size , algn , Pos , Cur T , New T , Win , Dif
512 , 6 , 192 , 9.2 , 9.04 , no-RTM , 0.16
512 , 7 , 224 , 9.19 , 8.98 , no-RTM , 0.21
2048 , 0 , 256 , 10.74 , 10.54 , no-RTM , 0.2
2048 , 0 , 512 , 14.81 , 14.87 , RTM , 0.06
2048 , 0 , 1024 , 22.97 , 22.57 , no-RTM , 0.4
2048 , 0 , 2048 , 37.49 , 34.51 , no-RTM , 2.98 <--
Icelake:
size , algn , Pos , Cur T , New T , Win , Dif
512 , 6 , 192 , 7.6 , 7.3 , no-RTM , 0.3
512 , 7 , 224 , 7.63 , 7.27 , no-RTM , 0.36
2048 , 0 , 256 , 8.48 , 8.38 , no-RTM , 0.1
2048 , 0 , 512 , 11.57 , 11.42 , no-RTM , 0.15
2048 , 0 , 1024 , 17.92 , 17.38 , no-RTM , 0.54
2048 , 0 , 2048 , 30.37 , 27.34 , no-RTM , 3.03 <--
test-memchr, test-wmemchr, and test-rawmemchr are all passing.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
An unknown vector operation occurred in commit 2a76821c30. Fixed it
by using "ymm{k1}{z}" but not "ymm {k1} {z}".
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
And replace the generic algorithm with the Brian Kernighan's one.
GCC optimize it with popcnt if the architecture supports, so there
is no need to add the extra POPCNT define to enable it.
This is really a micro-optimization that only adds complexity:
recent ABIs already support it (x86-64-v2 or power64le) and it
simplifies the code for internal usage, since i686 does not allow an
internal iFUNC call.
Checked on x86_64-linux-gnu, aarch64-linux-gnu, and
powerpc64le-linux-gnu.
No bug. This commit optimizes memchr-evex.S. The optimizations include
replacing some branches with cmovcc, avoiding some branches entirely
in the less_4x_vec case, making the page cross logic less strict,
saving some ALU in the alignment process, and most importantly
increasing ILP in the 4x loop. test-memchr, test-rawmemchr, and
test-wmemchr are all passing.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
No bug. This commit optimizes memchr-avx2.S. The optimizations include
replacing some branches with cmovcc, avoiding some branches entirely
in the less_4x_vec case, making the page cross logic less strict,
asaving a few instructions the in loop return loop. test-memchr,
test-rawmemchr, and test-wmemchr are all passing.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
On x86_64, when configuring glibc with CFLAGS="-O2 -g -march=native",
some tests fail. After this patch, "make check" succeeds.
Tested on Intel Core i5-4590 with gcc 10.2.1.
No bug. This commit optimizes strchr-evex.S. The optimizations are
mostly small things such as save an ALU in the alignment process,
saving a few instructions in the loop return. The one significant
change is saving 2 instructions in the 4x loop. test-strchr,
test-strchrnul, test-wcschr, and test-wcschrnul are all passing.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
No bug. This commit optimizes strchr-avx2.S. The optimizations are all
small things such as save an ALU in the alignment process, saving a
few instructions in the loop return, saving some bytes in the main
loop, and increasing the ILP in the return cases. test-strchr,
test-strchrnul, test-wcschr, and test-wcschrnul are all passing.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
For some architectures, the two functions are aliased, so these
symbols need to be moved at the same time.
The symbols were moved using scripts/move-symbol-to-libc.py.
The current approach is to do this optimizations at a higher level,
in generic code, so that single-threaded cases can be specifically
targeted.
Furthermore, using IS_IN (libc) as a compile-time indicator that
all locks are private is no longer correct once process-shared lock
implementations are moved into libc.
The generic <lowlevellock.h> is not compatible with assembler code
(obviously), so it's necessary to remove two long-unused #includes.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Remove generic tlsdesc code related to lazy tlsdesc processing since
lazy tlsdesc relocation is no longer supported. This includes removing
GL(dl_load_lock) from _dl_make_tlsdesc_dynamic which is only called at
load time when that lock is already held.
Added a documentation comment too.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
No bug. This commit optimizes strlen-avx2.S. The optimizations are
mostly small things but they add up to roughly 10-30% performance
improvement for strlen. The results for strnlen are bit more
ambiguous. test-strlen, test-strnlen, test-wcslen, and test-wcsnlen
are all passing.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
No bug. This commit optimizes strlen-evex.S. The
optimizations are mostly small things but they add up to roughly
10-30% performance improvement for strlen. The results for strnlen are
bit more ambiguous. test-strlen, test-strnlen, test-wcslen, and
test-wcsnlen are all passing.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
No bug. This commit adds optimized cased for less_vec memset case that
uses the avx512vl/avx512bw mask store avoiding the excessive
branches. test-memset and test-wmemset are passing.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Since strchr-avx2.S updated by
commit 1f745ecc21
Author: noah <goldstein.w.n@gmail.com>
Date: Wed Feb 3 00:38:59 2021 -0500
x86-64: Refactor and improve performance of strchr-avx2.S
uses sarx:
c4 e2 72 f7 c0 sarx %ecx,%eax,%eax
for strchr-avx2 family functions, require BMI2 in ifunc-impl-list.c and
ifunc-avx2.h.
Since __strlen_evex and __strnlen_evex added by
commit 1fd8c163a8
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Fri Mar 5 06:24:52 2021 -0800
x86-64: Add ifunc-avx2.h functions with 256-bit EVEX
use sarx:
c4 e2 6a f7 c0 sarx %edx,%eax,%eax
require BMI2 for __strlen_evex and __strnlen_evex in ifunc-impl-list.c.
ifunc-avx2.h already requires BMI2 for EVEX implementation.
No Bug. This commit updates the large memcpy case (no overlap). The
update is to perform memcpy on either 2 or 4 contiguous pages at
once. This 1) helps to alleviate the affects of false memory aliasing
when destination and source have a close 4k alignment and 2) In most
cases and for most DRAM units is a modestly more efficient access
pattern. These changes are a clear performance improvement for
VEC_SIZE =16/32, though more ambiguous for VEC_SIZE=64. test-memcpy,
test-memccpy, test-mempcpy, test-memmove, and tst-memmove-overflow all
pass.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Lazy tlsdesc relocation is racy because the static tls optimization and
tlsdesc management operations are done without holding the dlopen lock.
This similar to the commit b7cf203b5c
for aarch64, but it fixes a different race: bug 27137.
Another issue is that ld auditing ignores DT_BIND_NOW and thus tries to
relocate tlsdesc lazily, but that does not work in a BIND_NOW module
due to missing DT_TLSDESC_PLT. Unconditionally relocating tlsdesc at
load time fixes this bug 27721 too.
With this patch, the maximal known error for tgamma is now reduced to 9 ulps
for dbl-64, for all rounding modes. Since exhaustive testing is not possible
for dbl-64, it might be that there are still cases with an error larger than
9 ulps, but all known cases are fixed (intensive tests were done to find cases
with large errors).
Tested on x86_64 and powerpc (and by Adhemerval Zanella on aarch64, arm,
s390x, sparc, and i686).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
For j0f/j1f/y0f/y1f, the largest error for all binary32
inputs is reduced to at most 9 ulps for all rounding modes.
The new code is enabled only when there is a cancellation at the very end of
the j0f/j1f/y0f/y1f computation, or for very large inputs, thus should not
give any visible slowdown on average. Two different algorithms are used:
* around the first 64 zeros of j0/j1/y0/y1, approximation polynomials of
degree 3 are used, computed using the Sollya tool (https://www.sollya.org/)
* for large inputs, an asymptotic formula from [1] is used
[1] Fast and Accurate Bessel Function Computation,
John Harrison, Proceedings of Arith 19, 2009.
Inputs yielding the new largest errors are added to auto-libm-test-in,
and ulps are regenerated for various targets (thanks Adhemerval Zanella).
Tested on x86_64 with --disable-multi-arch and on powerpc64le-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
config/i386/constraints.md in GCC has
(define_constraint "e"
"32-bit signed integer constant, or a symbolic reference known
to fit that range (for immediate operands in sign-extending x86-64
instructions)."
(match_operand 0 "x86_64_immediate_operand"))
Since movq takes a signed 32-bit immediate or a register source operand,
use "er", instead of "nr"/"ir", constraint for 32-bit signed integer
constant or register on movq.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Update ifunc-memmove.h to select the function optimized with AVX512
instructions using ZMM16-ZMM31 registers to avoid RTM abort with usable
AVX512VL since VZEROUPPER isn't needed at function exit.
Update ifunc-memset.h/ifunc-wmemset.h to select the function optimized
with AVX512 instructions using ZMM16-ZMM31 registers to avoid RTM abort
with usable AVX512VL and AVX512BW since VZEROUPPER isn't needed at
function exit.
Since VZEROUPPER triggers RTM abort while VZEROALL won't, select AVX
optimized string/memory functions with
xtest
jz 1f
vzeroall
ret
1:
vzeroupper
ret
at function exit on processors with usable RTM, but without 256-bit EVEX
instructions to avoid VZEROUPPER inside a transactionally executing RTM
region.
Update ifunc-memcmp.h to select the function optimized with 256-bit EVEX
instructions using YMM16-YMM31 registers to avoid RTM abort with usable
AVX512VL, AVX512BW and MOVBE since VZEROUPPER isn't needed at function
exit.
Update ifunc-memset.h/ifunc-wmemset.h to select the function optimized
with 256-bit EVEX instructions using YMM16-YMM31 registers to avoid RTM
abort with usable AVX512VL and AVX512BW since VZEROUPPER isn't needed at
function exit.
Update ifunc-memmove.h to select the function optimized with 256-bit EVEX
instructions using YMM16-YMM31 registers to avoid RTM abort with usable
AVX512VL since VZEROUPPER isn't needed at function exit.
Update ifunc-strcpy.h to select the function optimized with 256-bit EVEX
instructions using YMM16-YMM31 registers to avoid RTM abort with usable
AVX512VL and AVX512BW since VZEROUPPER isn't needed at function exit.
Update ifunc-avx2.h, strchr.c, strcmp.c, strncmp.c and wcsnlen.c to
select the function optimized with 256-bit EVEX instructions using
YMM16-YMM31 registers to avoid RTM abort with usable AVX512VL, AVX512BW
and BMI2 since VZEROUPPER isn't needed at function exit.
For strcmp/strncmp, prefer AVX2 strcmp/strncmp if Prefer_AVX2_STRCMP
is set.
Finally remove all mpa related files, headers, declarations, probes, unused
tables and update makefiles.
Reviewed-By: Paul Zimmermann <Paul.Zimmermann@inria.fr>
This patch series removes all remaining slow paths and related code.
First asin/acos, tan, atan, atan2 implementations are updated, and the final
patch removes the unused mpa files, headers and probes. Passes buildmanyglibc.
Remove slow paths from asin/acos. Add ULP annotations based on previous slow
path checks (which are approximate). Update AArch64 and x86_64 libm-test-ulps.
Reviewed-By: Paul Zimmermann <Paul.Zimmermann@inria.fr>
It turns out the startup code in csu/elf-init.c has a perfect pair of
ROP gadgets (see Marco-Gisbert and Ripoll-Ripoll, "return-to-csu: A
New Method to Bypass 64-bit Linux ASLR"). These functions are not
needed in dynamically-linked binaries because DT_INIT/DT_INIT_ARRAY
are already processed by the dynamic linker. However, the dynamic
linker skipped the main program for some reason. For maximum
backwards compatibility, this is not changed, and instead, the main
map is consulted from __libc_start_main if the init function argument
is a NULL pointer.
For statically linked binaries, the old approach based on linker
symbols is still used because there is nothing else available.
A new symbol version __libc_start_main@@GLIBC_2.34 is introduced because
new binaries running on an old libc would not run their ELF
constructors, leading to difficult-to-debug issues.
