Historically, SINGLE_THREAD_P is defined to 1 in the dynamic loader.
This has the side effect of disabling cancellation points. In order
to enable future use of SINGLE_THREAD_P for single-thread
optimizations in the dynamic loader (which becomes important once
more code is moved from libpthread), introduce a new
NO_SYSCALL_CANCEL_CHECKING macro which is always 1 for IS_IN (rtld),
indepdently of the actual SINGLE_THREAD_P value.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This allows the elimination of the __libc_multiple_threads_ptr
variable in libpthread and its initialization procedure.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
If libpthread is included in libc, it is not necessary to delay
initialization of the lock/unlock function pointers until libpthread
is loaded. This eliminates two unprotected function pointers
from _rtld_global and removes some initialization code from
libpthread.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
No bug.
This commit adds a new implementation for EVEX memchr that is not safe
for RTM because it uses vzeroupper. The benefit is that by using
ymm0-ymm15 it can use vpcmpeq and vpternlogd in the 4x loop which is
faster than the RTM safe version which cannot use vpcmpeq because
there is no EVEX encoding for the instruction. All parts of the
implementation aside from the 4x loop are the same for the two
versions and the optimization is only relevant for large sizes.
Tigerlake:
size , algn , Pos , Cur T , New T , Win , Dif
512 , 6 , 192 , 9.2 , 9.04 , no-RTM , 0.16
512 , 7 , 224 , 9.19 , 8.98 , no-RTM , 0.21
2048 , 0 , 256 , 10.74 , 10.54 , no-RTM , 0.2
2048 , 0 , 512 , 14.81 , 14.87 , RTM , 0.06
2048 , 0 , 1024 , 22.97 , 22.57 , no-RTM , 0.4
2048 , 0 , 2048 , 37.49 , 34.51 , no-RTM , 2.98 <--
Icelake:
size , algn , Pos , Cur T , New T , Win , Dif
512 , 6 , 192 , 7.6 , 7.3 , no-RTM , 0.3
512 , 7 , 224 , 7.63 , 7.27 , no-RTM , 0.36
2048 , 0 , 256 , 8.48 , 8.38 , no-RTM , 0.1
2048 , 0 , 512 , 11.57 , 11.42 , no-RTM , 0.15
2048 , 0 , 1024 , 17.92 , 17.38 , no-RTM , 0.54
2048 , 0 , 2048 , 30.37 , 27.34 , no-RTM , 3.03 <--
test-memchr, test-wmemchr, and test-rawmemchr are all passing.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
An unknown vector operation occurred in commit 2a76821c30. Fixed it
by using "ymm{k1}{z}" but not "ymm {k1} {z}".
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
The hwcap2 check for the aforementioned functions should check for
both PPC_FEATURE2_ARCH_3_1 and PPC_FEATURE2_HAS_ISEL but was
mistakenly checking for any one of them, enabling isa 3.1 version of
the functions in incompatible processors, like POWER8.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Big win in binary size and avoids duplicating the logic in multiple
places.
On x86_64, dropped from 1883206 to 1881790, a 1416 byte decrease.
Also changed logic to track if ttyname_buf has been allocated by
checking if it's NULL instead of tracking buflen as an additional
variable.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Simplifies the logic and makes intent clearer, while at the same time
decreasing binary size.
On x86_64, dropped from 1883270 to 1883206, a 64 byte decrease.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
There is no much gain in fallback to cpuinfo if sysfs is no present,
usually on restricted environment neither will be present. It also
simplifies the code and make all architecture use the sched_getaffinity
as the sysfs fallback.
Checked on sparc64-linux-gnu.
Both the sysfs and procfs parsing (through GET_NPROCS_PARSER) are
removed in favor the syscall. The initial scratch buffer should
fit to most of the common usage (1024 bytes with maps to 8192 CPUs).
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
And replace the generic algorithm with the Brian Kernighan's one.
GCC optimize it with popcnt if the architecture supports, so there
is no need to add the extra POPCNT define to enable it.
This is really a micro-optimization that only adds complexity:
recent ABIs already support it (x86-64-v2 or power64le) and it
simplifies the code for internal usage, since i686 does not allow an
internal iFUNC call.
Checked on x86_64-linux-gnu, aarch64-linux-gnu, and
powerpc64le-linux-gnu.
This change continues the improvements to compile-time out of bounds
checking by decorating more APIs with either attribute access, or by
explicitly providing the array bound in APIs such as tmpnam() that
expect arrays of some minimum size as arguments. (The latter feature
is new in GCC 11.)
The only effects of the attribute and/or the array bound is to check
and diagnose calls to the functions that fail to provide a sufficient
number of elements, and the definitions of the functions that access
elements outside the specified bounds. (There is no interplay with
_FORTIFY_SOURCE here yet.)
Tested with GCC 7 through 11 on x86_64-linux.
The symbol was moved using scripts/move-symbol-to-libc.py.
A small adjust to the sem_unlink implementation is necessary to avoid
a check-localplt failure.
A placeholder symbol to keep the GLIBC_2.1.1 version alive in
libpthread is added with this commit.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The symbols were moved using move-symbol-to-libc.py.
Both functions are moved at the same time because they depend
on internal functions in sysdeps/pthread/sem_routines.c, which
are moved in this commit as well. Additional hidden prototypes
are required to avoid check-localplt failures.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The symbol was moved using scripts/move-symbol-to-libc.py.
A new placeholder version is added at version GLIBC_2.30, to
preserve that version in libpthread.so.0.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Previously, the source file nptl/cancellation.c was compiled multiple
times, for libc, libpthread, librt. This commit switches to a single
implementation, with new __pthread_enable_asynccancel@@GLIBC_PRIVATE,
__pthread_disable_asynccancel@@GLIBC_PRIVATE exports.
The almost-unused CANCEL_ASYNC and CANCEL_RESET macros are replaced
by LIBC_CANCEL_ASYNC and LIBC_CANCEL_ASYNC macros. They call the
__pthread_* functions unconditionally now. The macros are still
needed because shared code uses them; Hurd has different definitions.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The symbol was moved using scripts/move-symbol-to-libc.py.
A temporary __pthread_testcancel@@GLIBC_PRIVATE export is created
because it is needed by the semaphore implementation.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The stack list is available in ld.so since commit
1daccf403b ("nptl: Move stack list
variables into _rtld_global"), so it's possible to walk the stack
list directly in ld.so and perform the initialization there.
This eliminates an unprotected function pointer from _rtld_global
and reduces the libpthread initialization code.
No bug. This commit optimizes memchr-evex.S. The optimizations include
replacing some branches with cmovcc, avoiding some branches entirely
in the less_4x_vec case, making the page cross logic less strict,
saving some ALU in the alignment process, and most importantly
increasing ILP in the 4x loop. test-memchr, test-rawmemchr, and
test-wmemchr are all passing.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
No bug. This commit optimizes memchr-avx2.S. The optimizations include
replacing some branches with cmovcc, avoiding some branches entirely
in the less_4x_vec case, making the page cross logic less strict,
asaving a few instructions the in loop return loop. test-memchr,
test-rawmemchr, and test-wmemchr are all passing.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
It operates similar to execve and it is is already used to implement
fexecve without requiring /proc to be mounted. However, different
than fexecve, if the syscall is not supported by the kernel an error
is returned instead of trying a fallback.
Checked on x86_64-linux-gnu and powerpc64le-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
And deprecate it in <pthread.h>, redirecting it to sched_yield
for the time being.
The symbol was moved using scripts/move-symbol-to-libc.py.
No GLIBC_2.34 symbol version is added because of the compatibility
symbol status.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The symbol was moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The symbol was moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The symbol was moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The symbol was moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The symbol was moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The symbol was moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And __pthread_rwlock_trywrlock as a compatibility symbol.
Remove the unused __libc_rwlock_trywrlock macro.
The symbols were moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And __pthread_rwlock_tryrdlock as a compatibility symbol.
Remove the unused __libc_rwlock_tryrdlock macro.
The symbols were moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The symbol was moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The symbol was moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And __pthread_rwlock_init as a compatibility symbol.
__libc_rwlock_init is changed to call __pthread_rwlock_init directly.
The symbols were moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And __pthread_rwlock_destroy as a compatibility symbol.
rwlocks do not need finalization, so change __libc_rwlock_fini to do
nothing.
The symbols were moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The symbol was moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The symbol was moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The symbol was moved using scripts/move-symbol-to-libc.py.
__pthread_setspecific@@GLIBC_2.34 is no longer needed after the move,
so it is removed with this commit, too.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The symbol was moved using scripts/move-symbol-to-libc.py.
__pthread_getspecific@@GLIBC_2.34 is no longer needed after the move,
so it is removed with this commit, too.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The symbol was moved using scripts/move-symbol-to-libc.py.
__pthread_key_delete@@GLIBC_PRIVATE is no longer needed after that,
so it is removed as well.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The symbol was moved using scripts/move-symbol-to-libc.py.
__pthread_key_create@@GLIBC_2.34 is no longer needed by glibc
itself with this change, but __pthread_key_create is used by
libstdc++, so it still has to be exported as a public symbol.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The symbol was moved using scripts/move-symbol-to-libc.py.
The __pthread_exit@@GLIBC_PRIVATE symbol is no longer needed
after this change, so remove it.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The symbol was moved using scripts/move-symbol-to-libc.py.
__pthread_mutex_unlock@GLIBC_2.34 is not removed in this commit
because it is still used from nptl/nptl-init.c.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The symbol was moved using scripts/move-symbol-to-libc.py.
The __pthread_mutex_trylock@@GLIBC_2.34 symbol version is no longer
needed because the call is now internal to libc, so remove it with
this commit.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The symbol was moved using scripts/move-symbol-to-libc.py.
The __pthread_mutex_timedlock@@GLIBC_PRIVATE export is no longer
needed, so it is removed with this commit.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The symbol was moved using scripts/move-symbol-to-libc.py.
__pthread_mutex_lock@GLIBC_2.34 is not removed in this commit
because it is still used from nptl/nptl-init.c.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The symbol was moved using scripts/move-symbol-to-libc.py.
The calls to __pthread_mutex_init, __pthread_mutexattr_init,
__pthread_mutexattr_settype are now private and no longer need
to be exported. This allows the removal of the newly added
GLIBC_2.34 symbol versions for those functions.
Also clean up some weak declarations in <libc-lockP.h> for
these functions. They are not needed and potentially incorrect
for static linking of mtx_init.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The symbol was moved using scripts/move-symbol-to-libc.py.
The __pthread_mutex_destroy@@GLIBC_2.34 symbol is no longer
neded because this commit makes __pthread_mutex_destroy@GLIBC_2.0
a compatibility symbol, so remove the new symbol version.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The symbol was moved using scripts/move-symbol-to-libc.py.
The __pthread_cond_wait@@GLIBC_PRIVATE symbol is no longer
neded, so remove that as well.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The symbol was moved using scripts/move-symbol-to-libc.py.
The __pthread_cond_timedwait@@GLIBC_PRIVATE symbol is no longer
neded, so remove that as well.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The symbol was moved using scripts/move-symbol-to-libc.py.
The __pthread_cond_signal@@GLIBC_PRIVATE symbol is no longer
neded, so remove that as well.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The symbol was moved using scripts/move-symbol-to-libc.py.
The __pthread_cond_init@@GLIBC_PRIVATE symbol is no longer
neded, so remove that as well.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The symbol was moved using scripts/move-symbol-to-libc.py.
The __pthread_cond_destroy@@GLIBC_PRIVATE symbol is no longer
neded, so remove that as well.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The symbol was moved using scripts/move-symbol-to-libc.py.
The __pthread_cond_broadcast@@GLIBC_PRIVATE symbol is no longer
neded, so remove that as well.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The symbol was moved using scripts/move-symbol-to-libc.py.
This change also turns __pthread_once into a compatibility symbol
because after the call_once move, an internal call to __pthread_once
can be used. This an adjustment to __libc_once: Outside libc (e.g.,
in nscd), it has to call pthread_once. With __pthread_once as a
compatibility symbol, it is no longer to add a new GLIBC_2.34
version after the move from libpthread, and this commit removes
the new __pthread_once@@GLIBC_2.34 version.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
These make variables can be used to add routines to different
libraries for the Hurd and Linux builds.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This implementation is based on __memset_power8 and integrates a lot
of suggestions from Anton Blanchard.
The biggest difference is that it makes extensive use of stxvl to
alignment and tail code to avoid branches and small stores. It has
three main execution paths:
a) "Short lengths" for lengths up to 64 bytes, avoiding as many
branches as possible.
b) "General case" for larger lengths, it has an alignment section
using stxvl to avoid branches, a 128 bytes loop and then a tail
code, again using stxvl with few branches.
c) "Zeroing cache blocks" for lengths from 256 bytes upwards and set
value being zero. It is mostly the __memset_power8 code but the
alignment phase was simplified because, at this point, address is
already 16-bytes aligned and also changed to use vector stores.
The tail code was also simplified to reuse the general case tail.
All unaligned stores use stxvl instructions that do not generate
alignment interrupts on POWER10, making it safe to use on
caching-inhibited memory.
On average, this implementation provides something around 30%
improvement when compared to __memset_power8.
Reviewed-by: Matheus Castanho <msc@linux.ibm.com>
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
This implementation is based on __memcpy_power8_cached and integrates
suggestions from Anton Blanchard.
It benefits from loads and stores with length for short lengths and for
tail code, simplifying the code.
All unaligned memory accesses use instructions that do not generate
alignment interrupts on POWER10, making it safe to use on
caching-inhibited memory.
The main loop has also been modified in order to increase instruction
throughput by reducing the dependency on updates from previous iterations.
On average, this implementation provides around 30% improvement when
compared to __memcpy_power7 and 10% improvement in comparison to
__memcpy_power8_cached.
This patch was initially based on the __memmove_power7 with some ideas
from strncpy implementation for Power 9.
Improvements from __memmove_power7:
1. Use lxvl/stxvl for alignment code.
The code for Power 7 uses branches when the input is not naturally
aligned to the width of a vector. The new implementation uses
lxvl/stxvl instead which reduces pressure on GPRs. It also allows
the removal of branch instructions, implicitly removing branch stalls
and mispredictions.
2. Use of lxv/stxv and lxvl/stxvl pair is safe to use on Cache Inhibited
memory.
On Power 10 vector load and stores are safe to use on CI memory for
addresses unaligned to 16B. This code takes advantage of this to
do unaligned loads.
The unaligned loads don't have a significant performance impact by
themselves. However doing so decreases register pressure on GPRs
and interdependence stalls on load/store pairs. This also improved
readability as there are now less code paths for different alignments.
Finally this reduces the overall code size.
3. Improved performance.
This version runs on average about 30% better than memmove_power7
for lengths larger than 8KB. For input lengths shorter than 8KB
the improvement is smaller, it has on average about 17% better
performance.
This version has a degradation of about 50% for input lengths
in the 0 to 31 bytes range when dest is unaligned.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
This patch updates the kernel version in the test tst-mman-consts.py
to 5.12. (There are no new MAP_* constants covered by this test in
5.12 that need any other header changes.)
Tested with build-many-glibcs.py.
Linux 5.12 has one new syscall, mount_setattr. Update
syscall-names.list and regenerate the arch-syscall.h headers with
build-many-glibcs.py update-syscalls.
Tested with build-many-glibcs.py.
On x86_64, when configuring glibc with CFLAGS="-O2 -g -march=native",
some tests fail. After this patch, "make check" succeeds.
Tested on Intel Core i5-4590 with gcc 10.2.1.
GCC 11 warns when a pointer to an uninitialized object is passed
to a function that takes a const-qualified argument. This is done
on the assumption that most such functions read from the object.
For the rare case of a function that doesn't, GCC 11 extends
attribute access to add a new mode called none.
POSIX pthread_setspecific() is one such rare function that takes
a const void* argument but that doesn't read from the object it
points to. To suppress the -Wmaybe-uninitialized issued by GCC
11 when the address of an uninitialized object is passed to it
(e.g., the result of malloc()), this change #defines
__attr_access_none in cdefs.h and uses the macro on the function
in sysdeps/htl/pthread.h and sysdeps/nptl/pthread.h.
No bug. This commit optimizes strchr-evex.S. The optimizations are
mostly small things such as save an ALU in the alignment process,
saving a few instructions in the loop return. The one significant
change is saving 2 instructions in the 4x loop. test-strchr,
test-strchrnul, test-wcschr, and test-wcschrnul are all passing.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
No bug. This commit optimizes strchr-avx2.S. The optimizations are all
small things such as save an ALU in the alignment process, saving a
few instructions in the loop return, saving some bytes in the main
loop, and increasing the ILP in the return cases. test-strchr,
test-strchrnul, test-wcschr, and test-wcschrnul are all passing.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
For some architectures, the two functions are aliased, so these
symbols need to be moved at the same time.
The symbols were moved using scripts/move-symbol-to-libc.py.
And pthread_mutexattr_setkind_np as a compatibility symbol.
__pthread_mutexattr_settype is used in mtx_init from libpthread,
so this commit adds a GLIBC_2.34 symbol version for it.
The symbols were moved using scripts/move-symbol-to-libc.py.
__pthread_mutexattr_init cannot be be made a compat symbol because
it is used in mtx_init, which is still in libpthread.
The symbols were moved using scripts/move-symbol-to-libc.py.
And pthread_mutexattr_getkind_np as a compatibility symbol.
(There is no declaration in <pthread.h>, so there is no need
to add an alias or a deprecation warning there.)
The symbols were moved using scripts/move-symbol-to-libc.py.
And __pthread_mutexattr_destroy as a compat symbol (so no
GLIBC_2.34 symbol version is added for it).
The symbols were moved using scripts/move-symbol-to-libc.py.
The symbols were moved using scripts/move-symbol-to-libc.py.
__pthread_mutex_trylock is used to implement mtx_timedlock,
which still resides in libpthread, so add a GLIBC_2.34 version
for it, to match the existing GLIBC_2.0 version.
The symbols were moved using scripts/move-symbol-to-libc.py.
The symbol aliasing follows pthread_cond_timedwait et al.
Missing hidden prototypes had to be added to nptl/pthreadP.h
for consistency.
Improvements compared to POWER9 version:
1. Take into account first 16B comparison for aligned strings
The previous version compares the first 16B and increments r4 by the number
of bytes until the address is 16B-aligned, then starts doing aligned loads at
that address. For aligned strings, this causes the first 16B to be compared
twice, because the increment is 0. Here we calculate the next 16B-aligned
address differently, which avoids that issue.
2. Use simple comparisons for the first ~192 bytes
The main loop is good for big strings, but comparing 16B each time is better
for smaller strings. So after aligning the address to 16 Bytes, we check
more 176B in 16B chunks. There may be some overlaps with the main loop for
unaligned strings, but we avoid using the more aggressive strategy too soon,
and also allow the loop to start at a 64B-aligned address. This greatly
benefits smaller strings and avoids overlapping checks if the string is
already aligned at a 64B boundary.
3. Reduce dependencies between load blocks caused by address calculation on loop
Doing a precise time tracing on the code showed many loads in the loop were
stalled waiting for updates to r4 from previous code blocks. This
implementation avoids that as much as possible by using 2 registers (r4 and
r5) to hold addresses to be used by different parts of the code.
Also, the previous code aligned the address to 16B, then to 64B by doing a
few 48B loops (if needed) until the address was aligned. The main loop could
not start until that 48B loop had finished and r4 was updated with the
current address. Here we calculate the address used by the loop very early,
so it can start sooner.
The main loop now uses 2 pointers 128B apart to make pointer updates less
frequent, and also unrolls 1 iteration to guarantee there is enough time
between iterations to update the pointers, reducing stalled cycles.
4. Use new P10 instructions
lxvp is used to load 32B with a single instruction, reducing contention in
the load queue.
vextractbm allows simplifying the tail code for the loop, replacing
vbpermq and avoiding having to generate a permute control vector.
Reviewed-by: Paul E Murphy <murphyp@linux.ibm.com>
Reviewed-by: Raphael M Zinsly <rzinsly@linux.ibm.com>
Reviewed-by: Lucas A. M. Magalhaes <lamm@linux.ibm.com>
The symbol was moved using scripts/move-symbol-to-libc.py.
There is no new symbol version because of the compatibility symbol
status. The __pthread_atfork reference in nptl/Versions was unused.
This is required for GCC versions before 10 which default to -fcommon.
Fixes commit 442e8a40da ("nptl: Move part
of TCB initialization from libpthread to __tls_init_tp").
The signal handler is exported as __nptl_setxid_sighandler, so
that the libpthread initialization code can install it. This
is sufficient for now because it is guarantueed to happen before
the first pthread_create call.
Onl pthread_cond_clockwait did not have a forwarder, so it needs
a new symbol version.
Some complications arise due to the need to supply hidden aliases,
GLIBC_PRIVATE exports (for the C11 condition variable implementation
that still remains in libpthread) and 64-bit time_t stubs.
pthread_cond_broadcast, pthread_cond_signal, pthread_cond_timedwait,
pthread_cond_wait, pthread_cond_clockwait have been moved using
scripts/move-symbol-to-libc.py.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This is complicated because of a second compilation of
nptl/pthread_mutex_lock.c via nptl/pthread_mutex_cond_lock.c.
PTHREAD_MUTEX_VERSIONS is introduced to suppress symbol versions
in that case.
The symbols __pthread_mutex_lock, __pthread_mutex_unlock,
__pthread_mutex_init, __pthread_mutex_destroy, pthread_mutex_lock,
pthread_mutex_unlock, pthread_mutex_init, pthread_mutex_destroy
have been moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The current approach is to do this optimizations at a higher level,
in generic code, so that single-threaded cases can be specifically
targeted.
Furthermore, using IS_IN (libc) as a compile-time indicator that
all locks are private is no longer correct once process-shared lock
implementations are moved into libc.
The generic <lowlevellock.h> is not compatible with assembler code
(obviously), so it's necessary to remove two long-unused #includes.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This is in preparation of moving the mutex code into libc.
__pthread_tunables_init is now called via __pthread_early_init.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The forwarders were only used internally, so new symbol versions
are needed. All symbols are moved at once because the forwarders
are no-ops if libpthread is not loaded, leading to inconsistencies
in case of a partial migration.
The symbols __pthread_rwlock_rdlock, __pthread_rwlock_unlock,
__pthread_rwlock_wrlock, pthread_rwlock_rdlock,
pthread_rwlock_unlock, pthread_rwlock_wrlock have been moved using
scripts/move-symbol-to-libc.py.
The __ symbol variants are turned into compat symbols, which is why they
do not receive a GLIBC_2.34 version.
The symbol was moved using scripts/move-symbol-to-libc.py.
tss_delete (still in libpthread) uses the __pthread_key_create
alias, so that is now exported under GLIBC_PRIVATE.
This initalization should only happen once for the main thread's TCB.
At present, auditors can achieve this by not linking against
libpthread. If libpthread becomes part of libc, doing this
initialization in libc would happen for every audit namespace,
or too late (if it happens from the main libc only). That's why
moving this code into ld.so seems the right thing to do, right after
the TCB initialization.
For !__ASSUME_SET_ROBUST_LIST ports, this also moves the symbol
__set_robust_list_avail into ld.so, as __nptl_set_robust_list_avail.
It also turned into a proper boolean flag.
Inline the __pthread_initialize_pids function because it seems no
longer useful as a separate function.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
TLS_INIT_TP is processor-specific, so it is not a good place to
put thread library initialization code (it would have to be repeated
for all CPUs). Introduce __tls_init_tp as a separate function,
to be called immediately after TLS_INIT_TP. Move the existing
stack list setup code for NPTL to this function.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Calling free directly may end up freeing a pointer allocated by the
dynamic loader using malloc from libc.so in the base namespace using
the allocator from libc.so in a secondary namespace, which results in
crashes.
This commit redirects the free call through GLRO and the dynamic
linker, to reach the correct namespace. It also cleans up the dlerror
handling along the way, so that pthread_setspecific is no longer
needed (which avoids triggering bug 24774).
Commit 9e78f6f6e7 ("Implement
_dl_catch_error, _dl_signal_error in libc.so [BZ #16628]") has the
side effect that distinct namespaces, as created by dlmopen, now have
separate implementations of the rtld exception mechanism. This means
that the call to _dl_catch_error from libdl in a secondary namespace
does not actually install an exception handler because the
thread-local variable catch_hook in the libc.so copy in the secondary
namespace is distinct from that of the base namepace. As a result, a
dlsym/dlopen/... failure in a secondary namespace terminates the process
with a dynamic linker error because it looks to the exception handler
mechanism as if no handler has been installed.
This commit restores GLRO (dl_catch_error) and uses it to set the
handler in the base namespace.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
No new symbol version is required because there was a forwarder.
The symbol has been moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
No new symbol version is required because there was a forwarder.
The symbol has been moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The pthread_exit symbol was moved using
scripts/move-symbol-to-libc.py. No new symbol version is needed
because there was a forwarder.
The new tests nptl/tst-pthread_exit-nothreads and
nptl/tst-pthread_exit-nothreads-static exercise the scenario
that pthread_exit is called without libpthread having been linked in.
This is not possible for the generic code, so these tests do not
live in sysdeps/pthread for now.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
It's necessary to stub out __libc_disable_asynccancel and
__libc_enable_asynccancel via rtld-stubbed-symbols because the new
direct references to the unwinder result in symbol conflicts when the
rtld exception handling from libc is linked in during the construction
of librtld.map.
unwind-forcedunwind.c is merged into unwind-resume.c. libc now needs
the functions that were previously only used in libpthread.
The GLIBC_PRIVATE exports of __libc_longjmp and __libc_siglongjmp are
no longer needed, so switch them to hidden symbols.
The symbol __pthread_unwind_next has been moved using
scripts/move-symbol-to-libc.py.
Reviewed-by: Adhemerva Zanella <adhemerval.zanella@linaro.org>
And also the fork generation counter, __fork_generation. This
eliminates the need for __fork_generation_pointer.
call_once remains in libpthread and calls the exported __pthread_once
symbol.
pthread_once and __pthread_once have been moved using
scripts/move-symbol-to-libc.py.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This internal symbol is used as part of the longjmp implementation.
Rename the file from nptl/pt-cleanup.c to nptl/pthread_cleanup_upto.c
so that the pt-* files remain restricted to libpthread.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The definitions in libc are sufficient, the forwarders are no longer
needed.
The symbols have been moved using scripts/move-symbol-to-libc.py.
s390-linux-gnu and s390x-linux-gnu need a new version placeholder
to keep the GLIBC_2.19 symbol version in libpthread.
Tested on i386-linux-gnu, powerpc64le-linux-gnu, s390x-linux-gnu,
x86_64-linux-gnu. Built with build-many-glibcs.py.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This affects _pthread_cleanup_pop, _pthread_cleanup_pop_restore,
_pthread_cleanup_push, _pthread_cleanup_push_defer. The symbols
have been moved using scripts/move-symbol-to-libc.py.
No new symbol versions are added because the symbols are turned into
compatibility symbols at the same time.
__pthread_cleanup_pop and __pthread_cleanup_push are added as
GLIBC_PRIVATE symbols because they are also used internally, for
glibc's own cancellation handling.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
It is still used internally. Since unwinding is now available
unconditionally, avoid indirect calls through function pointers loaded
from the stack by inlining the non-cancellation cleanup code. This
avoids a regression in security hardening.
The out-of-line __libc_cleanup_routine implementation is no longer
needed because the inline definition is now static __always_inline.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Remove generic tlsdesc code related to lazy tlsdesc processing since
lazy tlsdesc relocation is no longer supported. This includes removing
GL(dl_load_lock) from _dl_make_tlsdesc_dynamic which is only called at
load time when that lock is already held.
Added a documentation comment too.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
No bug. This commit optimizes strlen-avx2.S. The optimizations are
mostly small things but they add up to roughly 10-30% performance
improvement for strlen. The results for strnlen are bit more
ambiguous. test-strlen, test-strnlen, test-wcslen, and test-wcsnlen
are all passing.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
No bug. This commit optimizes strlen-evex.S. The
optimizations are mostly small things but they add up to roughly
10-30% performance improvement for strlen. The results for strnlen are
bit more ambiguous. test-strlen, test-strnlen, test-wcslen, and
test-wcsnlen are all passing.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
No bug. This commit adds optimized cased for less_vec memset case that
uses the avx512vl/avx512bw mask store avoiding the excessive
branches. test-memset and test-wmemset are passing.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Since strchr-avx2.S updated by
commit 1f745ecc21
Author: noah <goldstein.w.n@gmail.com>
Date: Wed Feb 3 00:38:59 2021 -0500
x86-64: Refactor and improve performance of strchr-avx2.S
uses sarx:
c4 e2 72 f7 c0 sarx %ecx,%eax,%eax
for strchr-avx2 family functions, require BMI2 in ifunc-impl-list.c and
ifunc-avx2.h.
Since __strlen_evex and __strnlen_evex added by
commit 1fd8c163a8
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Fri Mar 5 06:24:52 2021 -0800
x86-64: Add ifunc-avx2.h functions with 256-bit EVEX
use sarx:
c4 e2 6a f7 c0 sarx %edx,%eax,%eax
require BMI2 for __strlen_evex and __strnlen_evex in ifunc-impl-list.c.
ifunc-avx2.h already requires BMI2 for EVEX implementation.
No Bug. This commit updates the large memcpy case (no overlap). The
update is to perform memcpy on either 2 or 4 contiguous pages at
once. This 1) helps to alleviate the affects of false memory aliasing
when destination and source have a close 4k alignment and 2) In most
cases and for most DRAM units is a modestly more efficient access
pattern. These changes are a clear performance improvement for
VEC_SIZE =16/32, though more ambiguous for VEC_SIZE=64. test-memcpy,
test-memccpy, test-mempcpy, test-memmove, and tst-memmove-overflow all
pass.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Some registers that can be clobbered by the kernel during a syscall are not
listed on the clobbers list in sysdeps/unix/sysv/linux/powerpc/sysdep.h.
For syscalls using sc:
- XER is zeroed by the kernel on exit
For syscalls using scv:
- XER is zeroed by the kernel on exit
- Different from the sc case, most CR fields can be clobbered (according to
the ELF ABI and the Linux kernel's syscall ABI for powerpc
(linux/Documentation/powerpc/syscall64-abi.rst)
The same should apply to vsyscalls, which effectively execute a function call
but are not currently adding these registers as clobbers either.
These are likely not causing issues today, but they should be added to the
clobbers list just in case things change on the kernel side in the future.
Reported-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Raphael M Zinsly <rzinsly@linux.ibm.com>
MSG_NOSIGNAL was added on POSIX 2008 and Hurd seems to support it.
The SIGPIPE handling also makes the implementation not thread-safe
(due the sigaction usage).
Checked on x86_64-linux-gnu.
Now that libsupport abstract Linux possible missing support (either
due FS limitation that can't handle 64 bit timestamp or architectures
that do not handle values larger than unsigned 32 bit values) the
tests can be turned generic.
Checked on x86_64-linux-gnu and i686-linux-gnu. I also built the
tests for i686-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Lazy tlsdesc relocation is racy because the static tls optimization and
tlsdesc management operations are done without holding the dlopen lock.
This similar to the commit b7cf203b5c
for aarch64, but it fixes a different race: bug 27137.
On i386 the code is a bit more complicated than on x86_64 because both
rel and rela relocs are supported.
Lazy tlsdesc relocation is racy because the static tls optimization and
tlsdesc management operations are done without holding the dlopen lock.
This similar to the commit b7cf203b5c
for aarch64, but it fixes a different race: bug 27137.
Another issue is that ld auditing ignores DT_BIND_NOW and thus tries to
relocate tlsdesc lazily, but that does not work in a BIND_NOW module
due to missing DT_TLSDESC_PLT. Unconditionally relocating tlsdesc at
load time fixes this bug 27721 too.
The value of PR_TAGGED_ADDR_ENABLE was incorrect in the installed
headers and the prctl command macros were missing that are needed
for it to be useful (PR_SET_TAGGED_ADDR_CTRL). Linux headers have
the definitions since 5.4 so it's widely available, we don't need
to repeat these definitions. The remaining definitions are from
Linux 5.10.
To build glibc with --enable-memory-tagging, Linux 5.4 headers and
binutils 2.33.1 or newer is needed.
Reviewed-by: DJ Delorie <dj@redhat.com>
Since Linux 4.13, kernel limits the maximum command line arguments
length to 6 MiB [1]. Normally the limit is still quarter of the maximum
stack size but if that limit exceeds 6 MiB it's clamped down.
glibc's __sysconf implementation for Linux platform is not aware of
this limitation and for stack sizes of over 24 MiB it returns higher
ARG_MAX than Linux will actually accept. This can be verified by
executing the following application on Linux 4.13 or newer:
#include <stdio.h>
#include <string.h>
#include <sys/resource.h>
#include <sys/time.h>
#include <unistd.h>
int main(void) {
const struct rlimit rlim = { 40 * 1024 * 1024,
40 * 1024 * 1024 };
if (setrlimit(RLIMIT_STACK, &rlim) < 0) {
perror("setrlimit: RLIMIT_STACK");
return 1;
}
printf("ARG_MAX : %8ld\n", sysconf(_SC_ARG_MAX));
printf("63 * 100 KiB: %8ld\n", 63L * 100 * 1024);
printf("6 MiB : %8ld\n", 6L * 1024 * 1024);
char str[100 * 1024], *argv[64], *envp[1];
memset(&str, 'A', sizeof str);
str[sizeof str - 1] = '\0';
for (size_t i = 0; i < sizeof argv / sizeof *argv - 1; ++i) {
argv[i] = str;
}
argv[sizeof argv / sizeof *argv - 1] = envp[0] = 0;
execve("/bin/true", argv, envp);
perror("execve");
return 1;
}
On affected systems the program will report ARG_MAX as 10 MiB but
despite that executing /bin/true with a bit over 6 MiB of command line
arguments will fail with E2BIG error. Expected result is that ARG_MAX
is reported as 6 MiB.
Update the __sysconf function to clamp ARG_MAX value to 6 MiB if it
would otherwise exceed it. This resolves bug #25305 which was market
WONTFIX as suggested solution was to cap ARG_MAX at 128 KiB.
As an aside and point of comparison, bionic (a libc implementation for
Android systems) decided to resolve this issue by always returning 128
KiB ignoring any potential xargs regressions [2].
On older kernels this results in returning overly conservative value
but that's a safer option than being aggressive and returning invalid
value on recent systems. It's also worth noting that at this point
all supported Linux releases have the 6 MiB barrier so only someone
running an unsupported kernel version would get incorrectly truncated
result.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
[1] See https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=da029c11e6b12f321f36dac8771e833b65cec962
[2] See baed51ee3a
The commit 2433d39b69, which added time64 support to select, changed
the function to use __NR_pselect6 (or __NR_pelect6_time64) on all
architectures. However, on architectures where the symbol was
implemented with __NR_select the kernel normalizes the passed timeout
instead of return EINVAL. For instance, the input timeval
{ 0, 5000000 } is interpreted as { 5, 0 }.
And as indicated by BZ #27651, this semantic seems to be expected
and changing it results in some performance issues (most likely
the program does not check the return code and keeps issuing
select with unormalized tv_usec argument).
To avoid a different semantic depending whether which syscall the
architecture used to issue, select now always normalize the timeout
input. This is a slight change for some ABIs (for instance aarch64).
Checked on x86_64-linux-gnu and i686-linux-gnu.
An incorrect check in __longjmp_chk could fail on valid code causing
FAIL: debug/tst-longjmp_chk2
The original check was
altstack_sp + altstack_size - setjmp_sp > altstack_size
i.e. sp at setjmp was outside of the altstack range. Here we know that
longjmp is called from a signal handler on the altstack (SS_ONSTACK),
and that it jumps in the wrong direction (sp decreases), so the check
wants to ensure the jump goes to another stack.
The check is wrong when altstack_sp == setjmp_sp which can happen
when the altstack is a local buffer in the function that calls setjmp,
so the patch allows == too. This fixes bug 27709.
Note that the generic __longjmp_chk check seems to be different.
(it checks if longjmp was on the altstack but does not check setjmp,
so it would not catch incorrect longjmp use within the signal handler).
With this patch, the maximal known error for tgamma is now reduced to 9 ulps
for dbl-64, for all rounding modes. Since exhaustive testing is not possible
for dbl-64, it might be that there are still cases with an error larger than
9 ulps, but all known cases are fixed (intensive tests were done to find cases
with large errors).
Tested on x86_64 and powerpc (and by Adhemerval Zanella on aarch64, arm,
s390x, sparc, and i686).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
DL_UNMAP_IS_SPECIAL and DL_UNMAP were not defined. The definitions are
now copied from arm, since the same is needed on aarch64. The cleanup
of tlsdesc data is handled by the custom _dl_unmap.
Fixes bug 27403.
For j0f/j1f/y0f/y1f, the largest error for all binary32
inputs is reduced to at most 9 ulps for all rounding modes.
The new code is enabled only when there is a cancellation at the very end of
the j0f/j1f/y0f/y1f computation, or for very large inputs, thus should not
give any visible slowdown on average. Two different algorithms are used:
* around the first 64 zeros of j0/j1/y0/y1, approximation polynomials of
degree 3 are used, computed using the Sollya tool (https://www.sollya.org/)
* for large inputs, an asymptotic formula from [1] is used
[1] Fast and Accurate Bessel Function Computation,
John Harrison, Proceedings of Arith 19, 2009.
Inputs yielding the new largest errors are added to auto-libm-test-in,
and ulps are regenerated for various targets (thanks Adhemerval Zanella).
Tested on x86_64 with --disable-multi-arch and on powerpc64le-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
config/i386/constraints.md in GCC has
(define_constraint "e"
"32-bit signed integer constant, or a symbolic reference known
to fit that range (for immediate operands in sign-extending x86-64
instructions)."
(match_operand 0 "x86_64_immediate_operand"))
Since movq takes a signed 32-bit immediate or a register source operand,
use "er", instead of "nr"/"ir", constraint for 32-bit signed integer
constant or register on movq.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This fixes missing definition of math functions in libc in a static link
that are no longer built for libm after commit 4898d9712b ("Avoid adding
duplicated symbols into static libraries").
If building on s390 / i686 with -Os, various conformance
tests are failing with e.g.
conform/ISO/assert.h/linknamespace.out:
[initial] __assert_fail -> [libc.a(assert.o)] __dcgettext -> [libc.a(dcgettext.o)] __dcigettext -> [libc.a(dcigettext.o)] __getcwd -> [libc.a(getcwd.o)] __fstatat64 -> [libc.a(fstatat64.o)] gnu_dev_makedev
The usage of gnu_dev_makedev was recently introduced by
usage of the makedev makro in commit:
5b980d4809
linux: Use statx for MIPSn64
This patch is now linking against __gnu_dev_makedev as
also done in commit:
8b4a118222
Fix -Os gnu_dev_* linknamespace, localplt issues (bug 15105, bug 19463).
All of the isnan functions are in libc.so due to printf_fp, so move
__isnanf128 there too for consistency.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@ascii.art.br>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
UNREGISTER_ATFORK is now defined for all ports in register-atfork.h, so most
previous includes of fork.h actually only need register-atfork.h now, and
cxa_finalize.c does not need an ifdef UNREGISTER_ATFORK any more.
The nptl-specific fork generation counters can then go to pthreadP.h, and
fork.h be removed.
Checked on x86_64-linux-gnu and i686-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Update ifunc-memmove.h to select the function optimized with AVX512
instructions using ZMM16-ZMM31 registers to avoid RTM abort with usable
AVX512VL since VZEROUPPER isn't needed at function exit.
Update ifunc-memset.h/ifunc-wmemset.h to select the function optimized
with AVX512 instructions using ZMM16-ZMM31 registers to avoid RTM abort
with usable AVX512VL and AVX512BW since VZEROUPPER isn't needed at
function exit.
At function exit, AVX optimized string/memory functions have VZEROUPPER
which triggers RTM abort. When such functions are called inside a
transactionally executing RTM region, RTM abort causes severe performance
degradation. Add tests to verify that string/memory functions won't
cause RTM abort in RTM region.
Since VZEROUPPER triggers RTM abort while VZEROALL won't, select AVX
optimized string/memory functions with
xtest
jz 1f
vzeroall
ret
1:
vzeroupper
ret
at function exit on processors with usable RTM, but without 256-bit EVEX
instructions to avoid VZEROUPPER inside a transactionally executing RTM
region.
Update ifunc-memcmp.h to select the function optimized with 256-bit EVEX
instructions using YMM16-YMM31 registers to avoid RTM abort with usable
AVX512VL, AVX512BW and MOVBE since VZEROUPPER isn't needed at function
exit.
Update ifunc-memset.h/ifunc-wmemset.h to select the function optimized
with 256-bit EVEX instructions using YMM16-YMM31 registers to avoid RTM
abort with usable AVX512VL and AVX512BW since VZEROUPPER isn't needed at
function exit.
Update ifunc-memmove.h to select the function optimized with 256-bit EVEX
instructions using YMM16-YMM31 registers to avoid RTM abort with usable
AVX512VL since VZEROUPPER isn't needed at function exit.
Update ifunc-strcpy.h to select the function optimized with 256-bit EVEX
instructions using YMM16-YMM31 registers to avoid RTM abort with usable
AVX512VL and AVX512BW since VZEROUPPER isn't needed at function exit.
Update ifunc-avx2.h, strchr.c, strcmp.c, strncmp.c and wcsnlen.c to
select the function optimized with 256-bit EVEX instructions using
YMM16-YMM31 registers to avoid RTM abort with usable AVX512VL, AVX512BW
and BMI2 since VZEROUPPER isn't needed at function exit.
For strcmp/strncmp, prefer AVX2 strcmp/strncmp if Prefer_AVX2_STRCMP
is set.
1. Set Prefer_No_VZEROUPPER if RTM is usable to avoid RTM abort triggered
by VZEROUPPER inside a transactionally executing RTM region.
2. Since to compare 2 32-byte strings, 256-bit EVEX strcmp requires 2
loads, 3 VPCMPs and 2 KORDs while AVX2 strcmp requires 1 load, 2 VPCMPEQs,
1 VPMINU and 1 VPMOVMSKB, AVX2 strcmp is faster than EVEX strcmp. Add
Prefer_AVX2_STRCMP to prefer AVX2 strcmp family functions.
The tests are refactored to use a common skeleton that handles whether
the underlying filesystem supports 64 bit time, skips 64 bit time
tests when the TU only supports 32 bit, and also skip 64 bit time
tests larger than 32 unsigned int (y2106) if the system does not
support it (MIPSn64 on kernels without statx support).
Checked on x86_64-linux-gnu and i686-linux-gnu. I also checked
on a mips64el-linux-gnu with 4.1.4 and 5.10.0-4-5kc-malta kernel
to verify if the y2106 are indeed skipped.
MIPSn64 kernel ABI for legacy stat uses unsigned 32 bit for second
timestamp, which limits the maximum value to y2106. This patch
make mips64 use statx as for 32-bit architectures.
Thie __cp_stat64_t64_statx is open coded, its usage is solely on
fstatat64 and it avoid the need to redefine the name for mips64
(which will call __cp_stat64_statx since its does not use
__stat64_t64 internally).
If the minimum kernel supports statx there is no need to call the
fallback stat legacy syscalls.
The statx is also called on compat xstat syscall, but different
than the fstatat it calls no fallback and it is assumed to be
always present.
Checked on powerpc-linux-gnu (with and without --enable-kernel=4.11)
and on powerpc64-linux-gnu.
It makes fstatat use __NR_statx, which fix the s390 issue with
missing nanoxsecond support on compat stat syscalls (at least
on recent kernels) and limits the statx call to only one function
(which simplifies the __ASSUME_STATX support).
Checked on i686-linux-gnu and on powerpc-linux-gnu.
1. Support GLIBC_TUNABLES=glibc.cpu.hwcaps=-XSAVE.
2. Disable all features which depend on XSAVE:
a. If OSXSAVE is disabled by glibc tunables. Or
b. If both XSAVE and XSAVEC aren't usable.
The Linux version already target the current thread by using tgkill
along with getpid and gettid.
For arm, libpthread does not do a intra PLT since it will call the
raise from libc.
Checked on x86_64-linux-gnu.
The libc version is identical and built with same flags. The libc
version is set as the default version.
The libpthread compat symbol requires to mask it when building the
loader object otherwise ld might complain about a missing
versioned symbol (as for alpha).
Checked on x86_64-linux-gnu.
The libc version is identical and built with same flags. Both aarch64
and nios2 also requires to export __send and tt was done previously with
the HAVE_INTERNAL_SEND_SYMBOL (which forced the symbol creation).
All __send callers are internal to libc and the original issue that
required the symbol export was due a missing libc_hidden_def. So
a compat symbol is added for __send and the libc_hidden_def is
defined regardless.
Checked on x86_64-linux-gnu and i686-linux-gnu.
This is a target hook for memory tagging, the original was a naive
implementation. Uses the same algorithm as __libc_mtag_tag_region,
but with instructions that also zero the memory. This was not
benchmarked on real cpu, but expected to be faster than the naive
implementation.
This is a target hook for memory tagging, the original was a naive
implementation. The optimized version relies on "dc gva" to tag 64
bytes at a time for large allocations and optimizes small cases without
adding too many branches. This was not benchmarked on real cpu, but
expected to be faster than the naive implementation.
This is a common operation when heap tagging is enabled, so inline the
instruction instead of using an extern call.
The .inst directive is used instead of the name of the instruction (or
acle intrinsics) because malloc.c is not compiled for armv8.5-a+memtag
architecture, runtime cpu support detection is used.
Prototypes are removed from the comments as they were not always
correct.
The memset api is suboptimal and does not provide much benefit. Memory
tagging only needs a zeroing memset (and only for memory that's sized
and aligned to multiples of the tag granule), so change the internal
api and the target hooks accordingly. This is to simplify the
implementation of the target hook.
Reviewed-by: DJ Delorie <dj@redhat.com>
Use inline functions instead of macros, because macros can cause unused
variable warnings and type conversion issues. We assume these functions
may appear in the code but only in dead code paths (hidden by a runtime
check), so it's important that they can compile with correct types, but
if they are actually used that should be an error.
Currently the hooks are only used when USE_MTAG is true which only
happens on aarch64 and then the aarch64 specific code is used not this
generic header. However followup refactoring will allow the hooks to
be used with !USE_MTAG.
Note: the const qualifier in the comment was wrong: changing tags is a
write operation.
Reviewed-by: DJ Delorie <dj@redhat.com>
The arch13 memmove variant is currently selected by the ifunc selector
if the Miscellaneous-Instruction-Extensions Facility 3 facility bit
is present, but the function is also using vector instructions.
If the vector support is not present, one is receiving an operation
exception.
Therefore this patch also checks for vector support in the ifunc
selector and in ifunc-impl-list.c.
Just to be sure, the configure check is now also testing an arch13
vector instruction and an arch13 Miscellaneous-Instruction-Extensions
Facility 3 instruction.
This essentially folds compat_symbol_unique functionality into
compat_symbol.
This change eliminates the need for intermediate aliases for defining
multiple symbol versions, for both compat_symbol and versioned_symbol.
Some binutils versions do not suport multiple versions per symbol on
some targets, so aliases are automatically introduced, similar to what
compat_symbol_unique did. To reduce symbol table sizes, a configure
check is added to avoid these aliases if they are not needed.
The new mechanism works with data symbols as well as function symbols,
due to the way an assembler-level redirect is used. It is not
compatible with weak symbols for old binutils versions, which is why
the definition of __malloc_initialize_hook had to be changed. This
is not a loss of functionality because weak symbols do not matter
to dynamic linking.
The placeholder symbol needs repeating in nptl/libpthread-compat.c
now that compat_symbol is used, but that seems more obvious than
introducing yet another macro.
A subtle difference was that compat_symbol_unique made the symbol
global automatically. compat_symbol does not do this, so static
had to be removed from the definition of
__libpthread_version_placeholder.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
A subsequent change will require including <config.h> for defining
symbol_version_reference. <libc-symbol.h> should not include
<config.h> for _ISOMAC, so it cannot define symbol_version_reference
anymore, but symbol_version_reference is needed <shlib-compat.h> even
for _ISOMAC. Moving the definition of symbol_version_reference to a
separate file <libc-symver.h> makes it possible to use a single
definition for both cases.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2b47727c68 ("posix: Consolidate register-atfork") introduced a fork.h
header to declare the atfork unregister hook, but was missing adding it
for htl.
This fixes tst-atfork2.
During critical sections, signal handling is deferred and thus RPCs return
EINTR, even if SA_RESTART is set. We thus have to restart the whole critical
section in that case.
This also adds HURD_CRITICAL_UNLOCK in the cases where one wants to
break the section in the middle.
This change adds new test to assess sigtimedwait's timeout related
functionality - the sigset_t is configured for SIGUSR1, which will
not be triggered, so sigtimedwait just waits for timeout.
To be more specific - two use cases are checked:
- if sigtimedwait times out immediately when passed struct timespec has
zero values of tv_nsec and tv_sec.
- if sigtimedwait times out after timeout specified in passed argument
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This code provides test to check if time on target machine is properly
read via ntp_gettime syscall.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
After this patch applied the ntp_gettimex function is always declared
in the sys/timex.h header. Currently it is not when __REDIRECT_NTH is
defined (i.e. in ARM 32 bit port).
The generic implementation basically handle the system agnostic logic
(filtering out the invalid signals) while the __libc_sigaction is
the function with implements the system and architecture bits.
Checked on x86_64-linux-gnu and i686-linux-gnu.
