According to C99 and C11 Annex F, acosh (1) should be +0 in all
rounding modes. However, some implementations in glibc wrongly return
-0 in round-downward mode (which is what you get if you end up
computing log1p (-0), via 1 - 1 being -0 in round-downward mode).
This patch fixes the problem implementations, by correcting the test
for an exact 1 value in the ldbl-96 implementation to allow for the
explicit high bit of the mantissa, and by inserting fabs instructions
in the i386 implementations; tests of acosh are duly converted to
ALL_RM_TEST. I believe all the other sysdeps/ieee754 implementations
are already OK (I haven't checked the ia64 versions, but if buggy then
that will be obvious from the results of test runs after this patch is
in).
Tested x86_64 and x86 and ulps updated accordingly.
[BZ #16927]
* sysdeps/i386/fpu/e_acosh.S (__ieee754_acosh): Use fabs on x-1
value.
* sysdeps/i386/fpu/e_acoshf.S (__ieee754_acoshf): Likewise.
* sysdeps/i386/fpu/e_acoshl.S (__ieee754_acoshl): Likewise.
* sysdeps/ieee754/ldbl-96/e_acoshl.c (__ieee754_acoshl): Correct
for explicit high bit of mantissa when testing for argument equal
to 1.
* math/libm-test.inc (acosh_test): Use ALL_RM_TEST.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
This patch fixes bug 16064, i386 fenv_t not including SSE state, using
the technique suggested there of storing the state in the existing
__eip field of fenv_t to avoid needing to increase the size of fenv_t
and add new symbol versions. The included testcase, which previously
failed for i386 (but passed for x86_64), illustrates how the previous
state was buggy.
This patch causes the SSE state to be included *to the extent it is on
x86_64*. Where some state should logically be included but isn't for
x86_64 (see bug 16068), this patch does not cause it to be included
for i386 either. The idea is that any patch fixing that bug should
fix it for both x86_64 and i386 at once.
Tested i386 and x86_64. (I haven't tested the case of a CPU without
SSE2 disabling the test.)
[BZ #16064]
* sysdeps/i386/fpu/fegetenv.c: Include <unistd.h>, <ldsodefs.h>
and <dl-procinfo.h>.
(__fegetenv): Save SSE state in envp->__eip if supported.
* sysdeps/i386/fpu/feholdexcpt.c (feholdexcept): Save SSE state in
envp->__eip if supported.
* sysdeps/i386/fpu/fesetenv.c: Include <unistd.h>, <ldsodefs.h>
and <dl-procinfo.h>.
(__fesetenv): Always set __eip, __cs_selector, __opcode,
__data_offset and __data_selector in environment to 0. Set SSE
state if supported.
* sysdeps/x86/fpu/Makefile [$(subdir) = math] (tests): Add
test-fenv-sse.
[$(subdir) = math] (CFLAGS-test-fenv-sse.c): Add -msse2
-mfpmath=sse.
* sysdeps/x86/fpu/test-fenv-sse.c: New file.
This patch fixes incorrect results from catan and catanh of certain
special inputs in round-downward mode (bug 16799), and incorrect
results of __ieee754_logf (+/-0) in round-downward mode (bug 16800)
that show up through catan/catanh when tested in all rounding modes,
but not directly in the testing for logf because the bug gets hidden
by the wrappers.
Both bugs involve a zero that should be +0 being -0 instead: one
computed as (1-x)*(1+x) in the catan/catanh case, and one as (x-x) in
the logf case. The fixes ensure positive zero is used. Testing of
catan and catanh in all rounding modes is duly enabled.
I expect there are various other bugs in special cases in __ieee754_*
functions that are normally hidden by the wrappers but would show up
for testing with -lieee (or in future with -fno-math-errno if we
replace -lieee and _LIB_VERSION with compile-time redirection to new
*_noerrno symbol names).
Tested x86_64 and x86 and ulps updated accordingly.
[BZ #16799]
[BZ #16800]
* math/s_catan.c (__catan): Avoid passing -0 denominator to atan2
with 0 numerator.
* math/s_catanf.c (__catanf): Likewise.
* math/s_catanh.c (__catanh): Likewise.
* math/s_catanhf.c (__catanhf): Likewise.
* math/s_catanhl.c (__catanhl): Likewise.
* math/s_catanl.c (__catanl): Likewise.
* sysdeps/ieee754/flt-32/e_logf.c (__ieee754_logf): Always divide
by positive zero when computing -Inf result.
* math/libm-test.inc (catan_test): Use ALL_RM_TEST.
(catanh_test): Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
This patch fixes bug 16789, incorrect sign of (real part) zero result
from clog and clog10 in round-downward mode, arising from that real
part being computed as 0 - 0. To ensure that an underflow exception
occurred, the code used an underflowing value (the next term in the
series for log1p) in arithmetic computing the real part of the result,
yielding the problematic 0 - 0 computation in some cases even when the
mathematical result would be small but positive. The patch changes
this code to use the math_force_eval approach to ensuring that an
underflowing computation actually occurs. Tests of clog and clog10
are enabled in all rounding modes.
Tested x86_64 and x86 and ulps updated accordingly.
[BZ #16789]
* math/s_clog.c (__clog): Use math_force_eval to ensure underflow
instead of using underflowing value in computing result.
* math/s_clog10.c (__clog10): Likewise.
* math/s_clog10f.c (__clog10f): Likewise.
* math/s_clog10l.c (__clog10l): Likewise.
* math/s_clogf.c (__clogf): Likewise.
* math/s_clogl.c (__clogl): Likewise.
* math/libm-test.inc (clog_test): Use ALL_RM_TEST.
(clog10_test): Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
This patch fixes bug 16348, spurious underflows from x86/x86_64 expl
on arguments close to 0. These implementations effectively use expm1
(on the fractional part of the argument) internally, so resulting in
spurious underflows when the result is very close to 1. For arguments
small enough that the round-to-nearest correct result is 1, this patch
uses 1+x instead.
These implementations are also used for exp10l and so the patch fixes
similar issues there (the 0x1p-67 threshold being small enough to be
correct for exp10l as well as expl). But because of spurious
underflows in other exp10 implementations (bug 16560), the tests
aren't added for exp10 at this point - they can be added when the
other exp10 parts of that bug are fixed.
Tested x86_64 and x86; no ulps updates needed.
[BZ #16348]
* sysdeps/i386/fpu/e_expl.S (IEEE754_EXPL) [!USE_AS_EXPM1L]: Use
1+x for argument with exponent below -67.
* sysdeps/x86_64/fpu/e_expl.S (IEEE754_EXPL) [!USE_AS_EXPM1L]:
Likewise.
* math/auto-libm-test-in: Add more tests of exp.
* math/auto-libm-test-out: Regenerated.
gen-auto-libm-tests presently allows but does not require underflow
exceptions for results with magnitude in the range (greatest
subnormal, least normal].
In some cases, the magnitude of the exact result is very slightly
above the least normal, but rounding in the implementation results in
it effectively computing an infinite-precision result that is slightly
below the least normal, so raising an underflow exception. This is in
accordance with the documented accuracy goals, but results in
testsuite failures.
This patch changes the logic to allow underflows when the mathematical
result is up to 0.5ulp above the least normal (so in any case where
the round-to-nearest result is the least normal). Ideally underflows
in all these cases would be accepted only when an underflow with the
actual result is consistent with the rounding mode (in FE_TOWARDZERO
mode, a return value of the least normal implies that the
infinite-precision result did not underflow so there should be no
underflow exception, for example), so as to match the documented goals
more precisely - whereas at present the tests for exceptions are
completely independent of the tests of the returned values. (The same
applies to overflow exceptions as well - they too should be checked
for consistency with the result, as in FE_TOWARDZERO mode a result
1ulp below the largest finite value should be inconsistent with an
overflow exception and cause a failure with overflow rather than
simply being considered a 1ulp error when overflow is expected.) But
the present patch at least deals with the cases causing spurious
failures so that (a) certain existing tests no longer need to be
marked as having spurious exceptions (such markings in
auto-libm-test-in end up applying to more cases than just those they
are needed for) and (b) log1p can be tested in all rounding modes
without introducing more such failures. This patch duly moves tests
of log1p to ALL_RM_TEST.
Tested x86_64 and x86 and ulps updated accordingly.
[BZ #16357]
[BZ #16599]
* math/gen-auto-libm-tests.c (fp_format_desc): Add field
min_plus_half.
(fp_formats): Update initializers.
(init_fp_formats): Initialize new field.
(output_for_one_input_case): Allow underflow for results up to
min_plus_half.
* math/libm-test.inc (log1p_test): Use ALL_RM_TEST.
* math/auto-libm-test-in: Don't mark some underflows from asin and
atanh as spurious.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
The dbl-64 version of exp needs round-to-nearest mode for its internal
computations, but that has the consequence of inappropriate
overflowing and underflowing results in other rounding modes. This
patch fixes this by recomputing the relevant results in cases where
the round-to-nearest result overflows to infinity or underflows to
zero (most of the diffs are actually just consequent reindentation).
Tests are enabled in all rounding modes for complex functions using
exp - but not for cexp because it turns out there are bugs causing
spurious underflows for cexp for some tests, which will need to be
fixed separately (I suspect ccos ccosh csin csinh ctan ctanh have
similar bugs, just not shown by the present set of test inputs).
Tested x86_64 and x86 and ulps updated accordingly.
[BZ #16284]
* sysdeps/ieee754/dbl-64/e_exp.c (__ieee754_exp): Use original
rounding mode to recompute results that overflow to infinity or
underflow to zero.
* math/auto-libm-test-in: Don't mark tests as expected to fail for
bug 16284.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (ccos_test): Use ALL_RM_TEST.
(ccosh_test): Likewise.
(csin_test_data): Use plus_oflow.
(csin_test): Use ALL_RM_TEST.
(csinh_test_data): Use plus_oflow.
(csinh_test): Use ALL_RM_TEST.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
According to ISO C Annex F, log (1) should be +0 in all rounding
modes, but some implementations in glibc wrongly return -0 in
round-downward mode (mapping to log1p (x - 1) is problematic because 1
- 1 is -0 in round-downward mode, and log1p (-0) is -0). This patch
fixes this. (It helps with some implementations of other functions
such as acosh, log2 and log10 that call out to log, but not enough to
enable all-rounding-modes testing for those functions without further
fixes to other implementations of them.)
Tested x86_64 and x86 and ulps updated accordingly, and did spot tests
for mips64 for the ldbl-128 fix, and i586 for the sysdeps/i386/fpu
implementations shadowed by those in sysdeps/i386/i686/fpu.
[BZ #16731]
* sysdeps/i386/fpu/e_log.S (__ieee754_log): Take absolute value
when x - 1 is zero.
* sysdeps/i386/fpu/e_logf.S (__ieee754_logf): Likewise.
* sysdeps/i386/fpu/e_logl.S (__ieee754_logl): Likewise.
* sysdeps/i386/i686/fpu/e_logl.S (__ieee754_logl): Likewise.
* sysdeps/ieee754/dbl-64/e_log.c (__ieee754_log): Return +0 when
argument is 1.
* sysdeps/ieee754/ldbl-128/e_logl.c (__ieee754_logl): Likewise.
* sysdeps/x86_64/fpu/e_logl.S: Take absolute value when x - 1 is
zero.
* math/libm-test.inc (log_test): Use ALL_RM_TEST.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
This patch makes libm-test.inc tests of most functions use ALL_RM_TEST
unless there was some reason to defer that change for a particular
function.
I started out planning to defer the change for pow (bug 16315), cexp /
ccos / ccosh / csin / csinh (likely fallout from exp, bug 16284) and
cpow (exact expectations for signs of exact zero results not wanted).
Testing on x86_64 and x86 showed additional failures for acosh, cacos,
catan, catanh, clog, clog10, jn, log, log10, log1p, log2, tgamma, yn,
so making the change for those functions was deferred as well, pending
investigation to show which of these represent distinct bugs (some
such bugs may already be filed) and appropriate fixing / XFAILing.
Failures include wrong signs of zero results, errors slightly above
the 9ulp bound (in such cases it may make sense for functions to set
round-to-nearest internally to reduce error accumulation), large
errors and incorrect overflow/underflow for the rounding mode (with
consequent missing errno settings in some cases). It's possible some
could be issues with test expectations, though I didn't notice any
that were obviously like that (I added NO_TEST_INLINE for cases that
were failing for ildoubl on x86 and where it seemed reasonable for
them to fail for the fast-math inlines).
There may of course be failures on other architectures for functions
that didn't fail on x86_64 or x86, in which case the usual rule
applies: file a bug (preferably identifying the underlying problem
function, in cases where function A calls function B and a problem
with function B may present in the test results for function A) if not
already in Bugzilla then fix or XFAIL.
Tested x86_64 and x86 and ulps updated accordingly.
* math/libm-test.inc (asinh_test): Use ALL_RM_TEST.
(atan_test): Likewise.
(atanh_test_data): Use NO_TEST_INLINE for two tests.
(atanh_test): Use ALL_RM_TEST.
(atan2_test_data): Likewise.
(cabs_test): Likewise.
(cacosh_test): Likewise.
(carg_test): Likewise.
(casin_test): Likewise.
(casinh_test): Likewise.
(cbrt_test): Likewise.
(csqrt_test): Likewise.
(erf_test): Likewise.
(erfc_test): Likewise.
(pow10_test): Likewise.
(exp2_test): Likewise.
(hypot_test): Likewise.
(j0_test): Likewise.
(j1_test): Likewise.
(lgamma_test): Likewise.
(gamma_test): Likewise.
(sincos_test): Likewise.
(tanh_test): Likewise.
(y0_test): Likewise.
(y1_test): Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
ISO C requires the result of nextafter to be independent of the
rounding mode, even when underflow or overflow occurs. This patch
fixes the bug in various nextafter implementations that, having done
an overflowing computation to force an overflow exception (correct),
they then return the result of that computation rather than an
infinity computed some other way (incorrect, when the overflowing
result of arithmetic with that sign and rounding mode is finite but
the correct result is infinite) - generally by falling through to
existing code to return a value that in fact is correct for this case
(but was computed by an integer increment and so without generating
the exceptions required). Having fixed the bug, the previously
deferred conversion of nextafter testing in libm-test.inc to
ALL_RM_TEST is also included.
Tested x86_64 and x86; also spot-checked results of nextafter tests
for powerpc32 and mips64 to test the ldbl-128ibm and ldbl-128
changes. (The m68k change is untested.)
[BZ #16677]
* math/s_nextafter.c (__nextafter): Do not return value from
overflowing computation.
* sysdeps/i386/fpu/s_nextafterl.c (__nextafterl): Likewise.
* sysdeps/ieee754/flt-32/s_nextafterf.c (__nextafterf): Likewise.
* sysdeps/ieee754/ldbl-128/s_nextafterl.c (__nextafterl):
Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_nextafterl.c (__nextafterl):
Likewise.
* sysdeps/m68k/m680x0/fpu/s_nextafterl.c (__nextafterl): Likewise.
* math/libm-test.inc (nextafter_test): Use ALL_RM_TEST.
As recently discussed
<https://sourceware.org/ml/libc-alpha/2014-02/msg00670.html>, it
doesn't seem particularly useful for libm-test-ulps files to contain
huge amounts of data on ulps for individual tests; just the global
maximum observed ulps for each function, together with the
verification of exceptions, errno and special results such as
infinities and NaNs for each test, suffices to verify that a
function's behavior on the given test inputs is within the expected
accuracy. Removing this data reduces source tree churn caused by
updates to these files when libm tests are added, and reduces the
frequency with which testsuite additions actually need libm-test-ulps
changes at all.
Accordingly, this patch removes that data, so that individual tests
get checked against the global bounds for the given function and only
generate an error if those are exceeded. Tested x86_64 (including
verifying that if an ulps value is artificially reduced, the tests do
indeed fail as they should and "make regen-ulps" generates the
expected changes).
* math/libm-test.inc (struct ulp_data): Don't refer to ulps for
individual tests in comment.
(libm-test-ulps.h): Don't refer to test_ulps in #include comment.
(prev_max_error): New variable.
(prev_real_max_error): Likewise.
(prev_imag_max_error): Likewise.
(compare_ulp_data): Don't refer to test names in comment.
(find_test_ulps): Remove function.
(find_function_ulps): Likewise.
(find_complex_function_ulps): Likewise.
(init_max_error): Take function name as argument. Look up ulps
for that function.
(print_ulps): Remove function.
(print_max_error): Use prev_max_error instead of calling
find_function_ulps.
(print_complex_max_error): Use prev_real_max_error and
prev_imag_max_error instead of calling find_complex_function_ulps.
(check_float_internal): Take max_ulp parameter instead of calling
find_test_ulps. Don't call print_ulps.
(check_float): Update call to check_float_internal.
(check_complex): Update calls to check_float_internal.
(START): Pass argument to init_max_error.
* math/gen-libm-test.pl (%results): Don't include "kind"
information.
(parse_ulps): Don't handle ulps of individual tests.
(print_ulps_file): Likewise.
(output_ulps): Likewise.
* math/README.libm-test: Update.
* manual/libm-err-tab.pl (parse_ulps): Don't handle ulps of
individual tests.
* sysdeps/aarch64/libm-test-ulps: Remove individual test ulps.
* sysdeps/alpha/fpu/libm-test-ulps: Likewise.
* sysdeps/arm/libm-test-ulps: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/ia64/fpu/libm-test-ulps: Likewise.
* sysdeps/m68k/coldfire/fpu/libm-test-ulps: Likewise.
* sysdeps/m68k/m680x0/fpu/libm-test-ulps: Likewise.
* sysdeps/microblaze/libm-test-ulps: Likewise.
* sysdeps/mips/mips32/libm-test-ulps: Likewise.
* sysdeps/mips/mips64/libm-test-ulps: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Likewise.
* sysdeps/powerpc/nofpu/libm-test-ulps: Likewise.
* sysdeps/s390/fpu/libm-test-ulps: Likewise.
* sysdeps/sh/libm-test-ulps: Likewise.
* sysdeps/sparc/fpu/libm-test-ulps: Likewise.
* sysdeps/tile/libm-test-ulps: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* sysdeps/hppa/fpu/libm-test-ulps: Remove individual test ulps.
This patch moves tests of clog10 to auto-libm-test-in. Note that this
means gen-auto-libm-tests will now depend on the recent MPC 1.0.2
release which added a fix for a bug that made gen-auto-libm-tests hang
for clog10. (It still can't conveniently be used for cacos cacosh
casin casinh catan catanh csin csinh because of extreme slowness of
those functions for special cases in MPC; at least some slow cases of
csin / csinh are fixed in MPC trunk, but not in a release.)
Tested x86_64 and x86 and ulps updated accordingly.
* math/auto-libm-test-in: Add tests of clog10.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (clog10_test_data): Use AUTO_TESTS_c_c.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
gen-auto-libm-tests has a bug in the logic for setting a sticky bit
based on the ternary value from MPFR: it is correct for positive
results, but for negative results mpz_setbit acts as if a two's
complement representation is used, whereas the low bit needs setting
based on the sign-magnitude representation GMP actually uses. (This
showed up in converting fma tests to use auto-libm-test-in /
gen-auto-libm-tests.)
This patch fixes the problem by negating the mpz_t value to set its
low bit. There are lots of changes to auto-libm-test-out (mainly 1ulp
fixes to ldbl-128 expected results), but only a few ulps updates are
needed on x86 / x86_64. In one case, a corrected expectation showed
up a spurious underflow exception where the correct result is slightly
outside the underflowing range.
Tested x86_64 and x86 and ulps updated accordingly.
* math/gen-auto-libm-tests.c (adjust_real): Ensure integers are
non-negative before setting low bit.
* math/auto-libm-test-in: Mark one asin test possibly having
spurious underflow.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
This patch fixes bug 16356, bad results from x86 / x86_64 expl /
exp10l in directed rounding modes, the most serious of the bugs shown
up by my patch expanding libm test coverage. When I fixed bug 16293,
I thought it was only necessary to set round-to-nearest when using
frndint in expm1 functions, because in other cases the cancellation
error from having the resulting fractional part close to 1 or -1 would
not be significant. However, in expl and exp10l, the way the final
fractional part gets computed (something more complicated than a
simple subtraction, because more precision is needed than you'd get
that way) can result in a value outside the range [-1, 1] when the
argument to frndint was very close to an integer and was rounded the
"wrong" way because of the rounding mode - and the f2xm1 instruction
has undefined results if its argument is outside [-1, 1], so resulting
in the large errors seen. So this patch removes the USE_AS_EXPM1L
conditionals on the round-to-nearest settings, so all of expl, expm1l
and exp10l now get round-to-nearest used for frndint (meaning the
final fractional part can at most be slightly above 0.5 in
magnitude). Associated tests of exp and exp10 are added and testing
of exp10 in directed rounding modes enabled.
Tested x86_64 and x86 and ulps updated accordingly.
* sysdeps/i386/fpu/e_expl.S (IEEE754_EXPL): Also set
round-to-nearest for [!USE_AS_EXPM1L].
* sysdeps/x86_64/fpu/e_expl.S (IEEE754_EXPL): Likewise.
* math/auto-libm-test-in: Do not expect cosh tests to fail. Add
more tests of exp and exp10. Expect some exp10 tests to miss
exceptions or fail in directed rounding modes.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (exp10_tonearest_test_data): New array.
(exp10_test_tonearest): New function.
(exp10_towardzero_test_data): New array.
(exp10_test_towardzero): New function.
(exp10_downward_test_data): New array.
(exp10_test_downward): New function.
(exp10_upward_test_data): New array.
(exp10_test_upward): New function.
(main): Call the new functions.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
Various libm functions have inadequate test coverage in libm-test.inc
/ auto-libm-test-in - failing to cover all the usual special cases
(infinities, NaNs, zero, large and small finite values, subnormals) as
well as a reasonable range of ordinary inputs and, where appropriate,
inputs close to the thresholds for underflow and overflow.
This patch improves test coverage for real functions [a-c]* (with the
expectation of adding more coverage for other functions later).
Tested x86_64 and x86 and ulps updated accordingly (and eight glibc
bugs and one C11 DR filed for issues found in the process).
* math/auto-libm-test-in: Add more tests of acos, acosh, asin,
asinh, atan, atan2, atanh, cbrt, cos and cosh.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (acosh_test_data): Add more tests.
(atanh_test_data): Likewise.
(ceil_test_data): Likewise.
(copysign_test_data): Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
This patch moves tests of cpow to auto-libm-test-in, adding the
required support to gen-auto-libm-tests.
Tested x86_64 and x86 and ulps updated accordingly.
* math/auto-libm-test-in: Add tests of cpow.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (cpow_test_data): Use AUTO_TESTS_cc_c.
* * math/gen-auto-libm-tests.c (func_calc_method): Add value
mpc_cc_c.
(func_calc_desc): Add mpc_cc_c union field.
(test_functions): Add cpow.
(special_fill_2pi): New function.
(special_real_inputs): Add 2pi.
(calc_generic_results): Handle mpc_cc_c.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
This patch moves tests of ccos, ccosh, cexp, clog, csqrt, ctan and
ctanh to auto-libm-test-in, adding the required support to
gen-auto-libm-tests. Other TEST_c_c functions aren't moved for now
(although the relevant table entries are put in gen-auto-libm-tests
for it to know how to handle them): clog10 because of a known MPC bug
causing it to hang for at least some pure imaginary inputs (fixed in
SVN, but I'd rather not rely on unreleased versions of MPFR or MPC
even if relying on very recent releases); the inverse trig and
hyperbolic functions because of known slowness in special cases; and
csin / csinh because of observed slowness that I need to investigate
and report to the MPC maintainers. Slowness can be bypassed by moving
to incremental generation (only for new / changed tests) rather than
regenerating the whole of auto-libm-test-out every time, but that
needs implementing. (This patch takes the time for running
gen-auto-libm-tests from about one second to seven, on my system,
which I think is reasonable. The slow functions would make it take
several minutes at least, which seems unreasonable.)
Tested x86_64 and x86 and ulps updated accordingly.
* math/auto-libm-test-in: Add tests of ccos, ccosh, cexp, clog,
csqrt, ctan and ctanh.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (TEST_COND_x86_64): New macro.
(TEST_COND_x86): Likewise.
(ccos_test_data): Use AUTO_TESTS_c_c.
(ccosh_test_data): Likewise.
(cexp_test_data): Likewise.
(clog_test_data): Likewise.
(csqrt_test_data): Likewise.
(ctan_test_data): Likewise.
(ctan_tonearest_test_data): Likewise.
(ctan_towardzero_test_data): Likewise.
(ctan_downward_test_data): Likewise.
(ctan_upward_test_data): Likewise.
(ctanh_test_data): Likewise.
(ctanh_tonearest_test_data): Likewise.
(ctanh_towardzero_test_data): Likewise.
(ctanh_downward_test_data): Likewise.
(ctanh_upward_test_data): Likewise.
* math/gen-auto-libm-tests.c (func_calc_method): Add value
mpc_c_c.
(func_calc_desc): Add mpc_c_c union field.
(FUNC_mpc_c_c): New macro.
(test_functions): Add cacos, cacosh, casin, casinh, catan, catanh,
ccos, ccosh, cexp, clog, clog10, csin, csinh, csqrt, ctan and
ctanh.
(special_fill_min_subnorm_p120): New function.
(special_real_inputs): Add min_subnorm_p120.
(calc_generic_results): Handle mpc_c_c.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
This patch moves tests of sincos to auto-libm-test-in, adding the
required support to gen-auto-libm-tests.
Tested x86_64 and x86 and ulps updated accordingly.
(auto-libm-test-out diffs omitted below.)
* math/auto-libm-test-in: Add tests of sincos.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (sincos_test_data): Use AUTO_TESTS_fFF_11.
* math/gen-auto-libm-tests.c (func_calc_method): Add value
mpfr_f_11.
(func_calc_desc): Add mpfr_f_11 union field.
(test_functions): Add sincos.
(calc_generic_results): Handle mpfr_f_11.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
math/gen-libm-test.pl has code to beautify names of various constants,
transforming the source form in libm-test.inc into the version
appearing in test names in libm-test-ulps files.
This has become decreasingly relevant over time for the M_* constants,
first as I changed the test names so only the arguments and not the
expected results appeared in them, then as tests have moved to
auto-libm-test-* so that automatically generated hex float constants
get used instead of M_* in test inputs.
This patch removes the beautification for all M_* constants. Tested
x86_64 and x86 and ulps updated accordingly. Even the one case where
this affected the name in the ulps files will disappear once complex
function tests are moved to auto-libm-test-*.
* math/gen-libm-test.pl (%beautify): Remove M_* constants.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
Bug 16293 is inaccuracy of x86/x86_64 versions of expm1, near 0 in
directed rounding modes, that arises from frndint rounding the
exponent to 1 or -1 instead of 0, resulting in large cancellation
error. This inaccuracy in turn affects other functions such as sinh
that use expm1. This patch fixes the problem by setting
round-to-nearest mode temporarily around the affected calls to
frndint. I don't think this is needed for other uses of frndint, such
as in exp itself, as only for expm1 is the cancellation error
significant.
Tested x86_64 and x86 and ulps updated accordingly.
* sysdeps/i386/fpu/e_expl.S (IEEE754_EXPL) [USE_AS_EXPM1L]: Set
round-to-nearest mode when using frndint.
* sysdeps/i386/fpu/s_expm1.S (__expm1): Likewise.
* sysdeps/i386/fpu/s_expm1f.S (__expm1f): Likewise.
* sysdeps/x86_64/fpu/e_expl.S (IEEE754_EXPL) [USE_AS_EXPM1L]:
Likewise.
* math/auto-libm-test-in: Add more tests of expm1. Do not expect
sinh test to fail.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (TEST_COND_x86_64): Remove macro.
(TEST_COND_x86): Likewise.
(expm1_tonearest_test_data): New array.
(expm1_test_tonearest): New function.
(expm1_towardzero_test_data): New array.
(expm1_test_towardzero): New function.
(expm1_downward_test_data): New array.
(expm1_test_downward): New function.
(expm1_upward_test_data): New array.
(expm1_test_upward): New function.
(main): Run the new test functions.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
This patch moves tests of jn and yn to auto-libm-test-in, adding the
required support for gen-auto-libm-tests (and adding a missing
assertion there and fixing logic that was broken for functions with
integer arguments).
Tested x86_64 and x86 and ulps updated accordingly.
* math/auto-libm-test-in: Add tests of jn and yn.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (jn_test_data): Use AUTO_TESTS_if_f.
(yn_test_data): Likewise.
* math/gen-auto-libm-tests.c (func_calc_method): Add value
mpfr_if_f.
(func_calc_desc): Add mpfr_if_f union field.
(FUNC_mpfr_if_f): New macro.
(test_functions): Add jn and yn.
(calc_generic_results): Assert type of second input for
mpfr_ff_f. Handle mpfr_if_f.
(output_for_one_input_case): Disable all checking for arguments
fitting floating-point types in case of an integer argument.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
This patch fixes bug 16338, ldbl-128 logl not handling subnormals
(with consequent inaccuracy for lgammal as well). The fix is simply
to use __frexpl when determining the exponent, as done already in
log2l and log10l. Given the lack of testing of small arguments to any
of the log* functions, appropriate tests are added for all of them.
Tested x86_64 and x86 and ulps updated accordingly, and spot tests
also run for mips64 to confirm the ldbl-128 fix.
Note that while this fixes lgammal inaccuracy for small positive
arguments, I suspect that there will still be problems with spurious
underflows in that case.
* sysdeps/ieee754/ldbl-128/e_logl.c (__ieee754_logl): Use __frexpl
to determine exponent and adjust argument to have exponent of -1.
* math/auto-libm-test-in: Add more tests of log, log10, log1p and
log2.
* math/auto-libm-test-out: Regenerated.
* sysdeps/x86_64/fpu/libm-test-ulps: Update.
The most common use case of math functions is with default rounding
mode, i.e. rounding to nearest. Setting and restoring rounding mode
is an unnecessary overhead for this, so I've added support for a
context, which does the set/restore only if the FP status needs a
change. The code is written such that only x86 uses these. Other
architectures should be unaffected by it, but would definitely benefit
if the set/restore has as much overhead relative to the rest of the
code, as the x86 bits do.
Here's a summary of the performance improvement due to these
improvements; I've only mentioned functions that use the set/restore
and have benchmark inputs for x86_64:
Before:
cos(): ITERS:4.69335e+08: TOTAL:28884.6Mcy, MAX:4080.28cy, MIN:57.562cy, 16248.6 calls/Mcy
exp(): ITERS:4.47604e+08: TOTAL:28796.2Mcy, MAX:207.721cy, MIN:62.385cy, 15543.9 calls/Mcy
pow(): ITERS:1.63485e+08: TOTAL:28879.9Mcy, MAX:362.255cy, MIN:172.469cy, 5660.86 calls/Mcy
sin(): ITERS:3.89578e+08: TOTAL:28900Mcy, MAX:704.859cy, MIN:47.583cy, 13480.2 calls/Mcy
tan(): ITERS:7.0971e+07: TOTAL:28902.2Mcy, MAX:1357.79cy, MIN:388.58cy, 2455.55 calls/Mcy
After:
cos(): ITERS:6.0014e+08: TOTAL:28875.9Mcy, MAX:364.283cy, MIN:45.716cy, 20783.4 calls/Mcy
exp(): ITERS:5.48578e+08: TOTAL:28764.9Mcy, MAX:191.617cy, MIN:51.011cy, 19071.1 calls/Mcy
pow(): ITERS:1.70013e+08: TOTAL:28873.6Mcy, MAX:689.522cy, MIN:163.989cy, 5888.18 calls/Mcy
sin(): ITERS:4.64079e+08: TOTAL:28891.5Mcy, MAX:6959.3cy, MIN:36.189cy, 16062.8 calls/Mcy
tan(): ITERS:7.2354e+07: TOTAL:28898.9Mcy, MAX:1295.57cy, MIN:380.698cy, 2503.7 calls/Mcy
So the improvements are:
cos: 27.9089%
exp: 22.6919%
pow: 4.01564%
sin: 19.1585%
tan: 1.96086%
The downside of the change is that it will have an adverse performance
impact on non-default rounding modes, but I think the tradeoff is
justified.
The value of PI is never exactly PI in any floating point representation,
and the value of PI/2 is never PI/2. It is wrong to expect cos(M_PI_2l)
to return 0, instead it will return an answer that is non-zero because
M_PI_2l doesn't round to exactly PI/2 in the type used.
That is to say that the correct answer is to do the following:
* Take PI or PI/2.
* Round to the floating point representation.
* Take the rounded value and compute an infinite precision cos or sin.
* Use the rounded result of the infinite precision cos or sin as the
answer to the test.
I used printf to do the type rounding, and Wolfram's Alpha to do the
infinite precision cos calculations.
The following changes bring x86-64 and x86 to 1/2 ulp for two tests.
It shows that the x86 cos implementation is quite good, and that
our test are flawed.
Unfortunately given that the rounding errors are type dependent we
need to fix this for each type. No regressions on x86-64 or x86.
---
2013-04-11 Carlos O'Donell <carlos@redhat.com>
* math/libm-test.inc (cos_test): Fix PI/2 test.
(sincos_test): Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Regenerate.
* sysdeps/i386/fpu/libm-test-ulps: Regenerate.
With help from Joseph Myers.
* sysdeps/ieee754/flt-32/e_j0f.c (__ieee754_y0f): Adjust tinyness
cutoff to 2**-13.
* sysdeps/ieee754/flt-32/e_j1f.c (__ieee754_y1f): Adjust tinyness
cutoff to 2**-25.
* sysdeps/ieee754/ldbl-128/e_j0l.c (U0): New constant.
( __ieee754_y0l): Avoid arithmetic underflow when 'x' is very
small.
* sysdeps/ieee754/ldbl-128/e_j1l.c (__ieee754_y1l): Likewise.
* math/libm-test.inc (y0_test): New tests.
(y1_test): New tests.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Update.
* sysdeps/sparc/fpu/libm-test-ulps: Update.
[BZ #6794]
Following Joseph comments about bug 6794, here is a proposed fix. It turned out
to be a large fix mainly because I had to move some file along to follow libm
files/names conventions.
Basically I have added wrappers (w_ilogb.c, w_ilogbf.c, w_ilogbl.c) that now calls
the symbol '__ieee754_ilogb'. The wrappers checks for '__ieee754_ilogb' output and
set the errno and raise exceptions as expected.
The '__ieee754_ilogb' is implemented in sysdeps. I have moved the 's_ilogb[f|l]' files
to e_ilogb[f|l] and renamed the '__ilogb[f|l]' to '__ieee754_ilogb[f|l]'.
I also found out a bug in i386 and x86-64 assembly coded ilogb implementation where
it raises a FE_DIVBYZERO when argument is '0.0'. I corrected this issue as well.
Finally I added the errno and FE_INVALID tests for 0.0, NaN and +-InF argument. Tested
on i386, x86-64, ppc32 and ppc64.
Also fix a bug in libc_feupdateenv_53bit: don't force the rounding
precision back to _FPU_EXTENDED, instead restore the precision that
the user had in effect beforehand.
* misc/bits/syslog.h (syslog): When __va_arg_pack is defined,
implement as __extern_always_inline function.
(vsyslog): Define as __extern_always_inline function unconditionally.
* libio/bits/stdio2.h (sprintf, snprintf, printf, fprintf):
When __va_arg_pack is defined, implement as __extern_always_inline
functions.
(vsprintf, vsnprintf, vprintf, vfprintf): Define as
__extern_always_inline functions unconditionally.
* libio/bits/stdio.h (vprintf): Ifdef out the inline when
bits/stdio2.h will be included.
* wcsmbs/bits/wchar2.h (__swprintf_alias): New redirect.
(swprintf, wprintf, fwprintf): When __va_arg_pack is defined,
implement as __extern_always_inline functions.
(vswprintf, vwprintf, vfwprintf): Define as
__extern_always_inline functions unconditionally.
* debug/tst-chk1.c (do_test): Enable remaining tests for C++.
2007-09-03 Jakub Jelinek <jakub@redhat.com>
* misc/sys/cdefs.h (__extern_inline, __extern_always_inline): Only
define in C++ for GCC 4.3+, in C++ always use __gnu_inline__
attribute.
* include/features.h (__USE_EXTERN_INLINES): Define only when
__extern_inline is defined.
* stdlib/stdlib.h: Include bits/stdlib.h when __extern_always_inline
is defined instead of when not __cplusplus.
* misc/sys/syslog.h: Include bits/syslog.h when __extern_always_inline
is defined instead of when not __cplusplus.
* socket/sys/socket.h: Include bits/socket2.h when
__extern_always_inline is defined instead of when not __cplusplus.
* libio/stdio.h: Include bits/stdio2.h when __extern_always_inline
is defined instead of when not __cplusplus.
* posix/unistd.h: Include bits/unistd.h when __extern_always_inline
is defined instead of when not __cplusplus.
* string/string.h: Include bits/string3.h when __extern_always_inline
is defined instead of when not __cplusplus.
* wcsmbs/wchar.h: Include bits/wchar2.h when __extern_always_inline
is defined instead of when not __cplusplus.
(btowc, wctob): Don't guard the inlines with ifndef __cplusplus.
* io/fcntl.h: Don't include bits/fcntl2.h if __extern_always_inline
is not defined.
* misc/bits/syslog-ldbl.h: Guard *_chk stuff with
defined __extern_always_inline instead of !defined __cplusplus.
* libio/bits/stdio-ldbl.h: Likewise.
* wcsmbs/bits/wchar-ldbl.h: Likewise.
* misc/bits/syslog.h (syslog): Don't define for C++.
(vsyslog): Use __extern_always_inline function for C++ instead of
a macro.
* libio/bits/stdio.h (__STDIO_INLINE): Define to __extern_inline
whenever that macro is defined.
(vprintf): Don't provide the inline for C++.
(fread_unlocked, fwrite_unlocked): Don't define the macros for C++.
* libio/bits/stdio2.h (sprintf, snprintf, printf, fprintf): Don't
define the macros for C++.
(vsprintf, vsnprintf, vprintf, vfprintf): Define as
__extern_always_inline functions for C++.
* io/sys/stat.h (stat, lstat, fstat, fstatat, mknod, mknodat,
stat64, lstat64, fstat64, fstatat64): Don't define if not
__USE_EXTERN_INLINES.
* wcsmbs/bits/wchar2.h: Fix #error message.
(swprintf, wprintf, fwprintf): Don't define the macros for C++.
(vswprintf, vwprintf, vfwprintf): Define using
__extern_always_inline functions for C++.
* string/bits/string3.h: Don't #undef macros if __cplusplus.
(memcpy, memmove, mempcpy, memset, bcopy, bzero, strcpy, stpcpy,
strncpy, strcat, strncat): Define as __extern_always_inline
functions instead of macros for C++.
* math/bits/cmathcalls.h: Guard __extern_inline routines with
defined __extern_inline.
* sysdeps/alpha/fpu/bits/mathinline.h (__MATH_INLINE): Define
to __extern_inline whenever that macro is defined.
* sysdeps/ia64/fpu/bits/mathinline.h (__MATH_INLINE): Likewise.
* sysdeps/i386/fpu/bits/mathinline.h (__MATH_INLINE): Likewise.
* sysdeps/i386/i486/bits/string.h (__STRING_INLINE): Likewise.
* sysdeps/s390/bits/string.h (__STRING_INLINE): Likewise.
* sysdeps/s390/fpu/bits/mathinline.h (__MATH_INLINE): Likewise.
* sysdeps/powerpc/fpu/bits/mathinline.h (__MATH_INLINE): Likewise.
* sysdeps/x86_64/fpu/bits/mathinline.h (__MATH_INLINE): Likewise.
* sysdeps/sparc/fpu/bits/mathinline.h (__MATH_INLINE): Likewise.
* sysdeps/unix/sysv/linux/sys/sysmacros.h (gnu_dev_major,
gnu_dev_minor, gnu_dev_makedev): Remove __extern_inline from
prototypes. Only provide __extern_inline routines if
__USE_EXTERN_INLINES.
* debug/Makefile: Add rules to build and run tst-{,lfs}chk{4,5,6}
tests.
* debug/tst-chk1.c (do_prepare, do_test): Allow compilation as C++.
For now avoid some *printf tests in C++. Skip all testing
if __USE_FORTIFY_LEVEL is defined, but __extern_always_inline macro
is not.
* debug/tst-chk4.cc: New file.
* debug/tst-chk5.cc: New file.
* debug/tst-chk6.cc: New file.
* debug/tst-lfschk4.cc: New file.
* debug/tst-lfschk5.cc: New file.
* debug/tst-lfschk6.cc: New file.
* include/wchar.h (__vfwprintf_chk, __vswprintf_chk): Avoid
prototypes in C++.
* include/stdio.h (__sprintf_chk, __snprintf_chk, __vsprintf_chk,
__vsnprintf_chk, __printf_chk, __fprintf_chk, __vprintf_chk,
__vfprintf_chk, __fgets_unlocked_chk, __fgets_chk): Likewise.
2007-03-27 Jakub Jelinek <jakub@redhat.com>
[BZ #3306]
* math/math_private.h (math_opt_barrier, math_force_eval): Define.
* sysdeps/i386/fpu/math_private.h: New file.
* sysdeps/x86_64/fpu/math_private.h: New file.
* math/s_nexttowardf.c (__nexttowardf): Use math_opt_barrier and
math_force_eval macros. Use "+m" constraint on asm rather than
"=m" and "m".
* math/s_nextafter.c (__nextafter): Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_nexttoward.c (__nexttoward):
Likewise.
* sysdeps/ieee754/flt-32/s_nextafterf.c (__nextafterf): Likewise.
* sysdeps/ieee754/ldbl-128/s_nexttoward.c (__nexttoward): Likewise.
* sysdeps/ieee754/ldbl-96/s_nexttoward.c (__nexttoward): Likewise.
* sysdeps/i386/fpu/s_nextafterl.c (__nextafterl): Use
math_opt_barrier and math_force_eval macros.
* sysdeps/ieee754/ldbl-128/s_nextafterl.c (__nextafterl): Likewise.
* sysdeps/ieee754/ldbl-96/s_nextafterl.c (__nextafterl): Likewise.
* sysdeps/i386/fpu/s_nexttoward.c: Include float.h.
(__nexttoward): Use math_opt_barrier and
math_force_eval macros. Use "+m" constraint on asm rather than
"=m" and "m". Only use asm to force double result if
FLT_EVAL_METHOD is 2.
* sysdeps/i386/fpu/s_nexttowardf.c: Include float.h.
(__nexttowardf): Use math_opt_barrier and
math_force_eval macros. Use "+m" constraint on asm rather than
"=m" and "m". Only use asm to force double result if
FLT_EVAL_METHOD is not 0.
* sysdeps/ieee754/ldbl-128ibm/s_nexttowardf.c: Include float.h.
(__nexttowardf): Use math_opt_barrier and
math_force_eval macros. If FLT_EVAL_METHOD is not 0, force
x to float using asm.
* sysdeps/ieee754/ldbl-opt/s_nexttowardfd.c: Include float.h.
(__nldbl_nexttowardf): Use math_opt_barrier and
math_force_eval macros. If FLT_EVAL_METHOD is not 0, force
x to float using asm.
* sysdeps/ieee754/ldbl-96/s_nexttowardf.c: Include float.h.
(__nexttowardf): Use math_opt_barrier and math_force_eval
macros. If FLT_EVAL_METHOD is not 0, force x to float using asm.
* math/bug-nextafter.c (zero, inf): New variables.
(main): Add new tests.
* math/bug-nexttoward.c (zero, inf): New variables.
(main): Add new tests.
2007-03-22 Jakub Jelinek <jakub@redhat.com>
[BZ #3427]
* sysdeps/x86_64/fpu/feholdexcpt.c (feholdexcept): Clear all
exceptions both in SW and MXCSR.
* sysdeps/x86_64/fpu/feupdateenv.c: New file.
* sysdeps/x86_64/fpu/feenablxcpt.c (feenableexcept): Remove dead code.
* sysdeps/x86_64/fpu/fedisblxcpt.c (fedisableexcept): Likewise.
* sysdeps/i386/fpu/feholdexcpt.c (feholdexcept): Clear all exceptions
in MXCSR if SSE is available.
* sysdeps/i386/fpu/feupdateenv.c: Include unistd.h, dl-procinfo.h
and ldsodefs.h.
(__feupdateenv): Query exceptions also from MXCSR if SSE is available.
Fix comment typo.
* sysdeps/ia64/fpu/feholdexcpt.c (feholdexcept): Clear all exceptions.
Return 0 rather than 1.
* sysdeps/ia64/fpu/feupdateenv.c (feupdateenv): Fix comment typo.
Remove incorrect part of a comment. Fix argument to feraiseexcept.
* math/test-fenv.c (feholdexcept_tests): New function.
(main): Call it.
2007-01-05 Richard B. Kreckel <kreckel@ginac.de>
[BZ #3427]
* sysdeps/i386/fpu/feholdexcpt.c (feholdexcept): Clear all exceptions
in SW.
2007-03-01 Jakub Jelinek <jakub@redhat.com>
[BZ #4096]
* sysdeps/ieee754/dbl-64/e_pow.c (__ieee754_pow): Check for NaN
earlier.
* math/libm-test.inc (pow_test): Add more tests involving NaNs.
* sysdeps/i386/fpu/e_powf.S (__ieee754_powf): Avoid invalid exception
for x qNaN and y either +-inf or non-integer value.
* sysdeps/i386/fpu/e_pow.S (__ieee754_pow): Likewise.
* sysdeps/i386/fpu/e_powl.S (__ieee754_powl): Likewise.
* sysdeps/x86_64/fpu/e_powl.S (__ieee754_powl): Likewise.
* sysdeps/i386/fpu/e_fmodf.S: Use fprem1 instead of fprem.
* sysdeps/i386/fpu/e_fmodl.c: Likewise.
* sysdeps/i386/fpu/e_fmod.S: Likewise.
Patch by Jared Casper <jaredcasper@gmail.com>.
* math/multc3.c: New file.
* sysdeps/unix/sysv/linux/sparc/sparc32/Makefile
[$(subdir) = math] (libm-routines): Add multc3, divtc3.
* sysdeps/unix/sysv/linux/sparc/sparc32/fpu/Implies: New file.
* sysdeps/sparc/sparc32/fpu/s_fabsl.c: Include math.h and
math_ldbl_opt.h.
(fabsl): Use long_double_symbol instead of weak_alias.
* sysdeps/sparc/sparc32/fpu/s_fabs.c: Include math.h and
math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (fabsl): Add compat_symbol.
2006-01-31 Martin Schwidefsky <schwidefsky@de.ibm.com>
Jakub Jelinek <jakub@redhat.com>
* sysdeps/unix/sysv/linux/s390/Implies: New file.
* sysdeps/unix/sysv/linux/s390/fpu/Implies: New file.
* sysdeps/unix/sysv/linux/s390/nldbl-abi.h: New file.
* sysdeps/s390/fpu/bits/mathinline.h (signbitl, sqrtl): New inlines.
* sysdeps/s390/bits/mathdef.h: New file.
* sysdeps/s390/fpu/e_sqrtl.c: New file.
* sysdeps/s390/s390-32/bits/wordsize.h (__LONG_DOUBLE_MATH_OPTIONAL,
__NO_LONG_DOUBLE_MATH): Define.
* sysdeps/s390/s390-64/bits/wordsize.h: Likewise.
* sysdeps/s390/Implies: Add ieee754/ldbl-128.
* sysdeps/s390/ldbl2mpn.c: File removed.
* sysdeps/s390/fpu/libm-test-ulps: Updated.
2006-01-31 Roland McGrath <roland@redhat.com>
* sysdeps/alpha/fpu/bits/mathdef.h: Moved to ...
* sysdeps/alpha/bits/mathdef.h: ... here.
* sysdeps/i386/fpu/bits/mathdef.h: Moved to ...
* sysdeps/i386/bits/mathdef.h: ... here.
* sysdeps/mips/fpu/bits/mathdef.h: Moved to ...
* sysdeps/mips/bits/mathdef.h: ... here.
* sysdeps/m68k/fpu/bits/mathdef.h: Moved to ...
* sysdeps/m68k/bits/mathdef.h: ... here.
* sysdeps/powerpc/fpu/bits/mathdef.h: Moved to ...
* sysdeps/powerpc/bits/mathdef.h: ... here.
* sysdeps/sparc/fpu/bits/mathdef.h: Moved to ...
* sysdeps/sparc/bits/mathdef.h: ... here.
* sysdeps/ia64/fpu/bits/mathdef.h: Moved to ...
* sysdeps/ia64/bits/mathdef.h: ... here.
* sysdeps/sh/sh4/fpu/bits/mathdef.h: Moved to ...
* sysdeps/sh/sh4/bits/mathdef.h: ... here.
* sysdeps/x86_64/fpu/bits/mathdef.h: Moved to ...
* sysdeps/x86_64/bits/mathdef.h: ... here.
2006-01-31 Jakub Jelinek <jakub@redhat.com>
* sysdeps/i386/fpu/e_expl.c: Mark c0 and c1 as const.
* sysdeps/ieee754/flt-32/s_expm1f.c: Make sure huge and tiny end
up in .rodata.
* sysdeps/ieee754/flt-32/e_exp2f.c: Make sure TWO127 and TWOM100
end up in .rodata.
* sysdeps/ieee754/flt-32/e_expf.c: Likewise.
* sysdeps/ieee754/dbl-64/e_exp2.c: Make sure TWO1023 and TWOM1000
end up in .rodata.
check_arrival_add_next_nodes): Avoid using uninitialized variable.
* malloc/memusage.c (dest): Fix a bunch of warnings on 32-bit arches.
* sysdeps/i386/fpu/libm-test-ulps: Update for GCC 4.0.x.
(elf_fpxregset_t): New type.
(struct elf_prpsinfo): If __WORDSIZE == 32, change pr_[ug]id type
to unsigned short int.
* sysdeps/unix/sysv/linux/x86_64/sys/user.h
(struct user_fpregs_struct): Fix comment.
* sysdeps/i386/fpu/bits/mathdef.h (float_t, double_t): If
__FLOAT_EVAL_METHOD__ is defined and 0, typedef to float resp. double.
* sysdeps/x86_64/fpu/bits/mathdef.h: Include bits/wordsize.h.
(float_t, double_t): If -m32 and not -mfpmath=sse, typedef to
long double.
* sysdeps/x86_64/fpu/bits/fenv.h: Include bits/wordsize.h.
(fenv_t): Remove __mxcsr field for -m32.
Update.
2004-02-09 Ulrich Drepper <drepper@redhat.com>
* sysdeps/i386/fpu/fclrexcpt.c (__feclearexcept): Don't touch bits
other than the status bits [BZ #10].
2003-11-25 Ulrich Drepper <drepper@redhat.com>
* sysdeps/i386/fpu/bits/mathinline.h: Introduce __libc_sqrtl symbol.
Define it appropriately after last change. Use it where __sqrtl
was used.
2003-07-22 H.J. Lu <hongjiu.lu@intel.com>
* elf/dl-support.c (_dl_hwcap): New variable.
(_dl_aux_init): Initialize GL(dl_hwcap) for static binaries.
* sysdeps/i386/fpu/fclrexcpt.c: Include <unistd.h>, <ldsodefs.h>
and <dl-procinfo.h>.
(__feclearexcept): Clear MXCSR if needed.
* sysdeps/i386/fpu/fsetexcptflg.c: Likewise.
* sysdeps/i386/fpu_control.h (_FPU_GETCW, _FPU_SETCW): Document
that newer hardware needs more than these macros.
* sysdeps/i386/setfpucw.c: New file.
2003-07-22 Jakub Jelinek <jakub@redhat.com>
* elf/Makefile (CFLAGS-ldconfig.c): Define IS_IN_ldconfig.
* elf/ldconfig.c: Include dl-procinfo.c.
(PROCINFO_CLASS): Define.
* sysdeps/generic/ldsodefs.h (PROCINFO_CLASS): Define.
* sysdeps/unix/sysv/linux/x86_64/dl-procinfo.c: New file.
* sysdeps/unix/sysv/linux/x86_64/dl-procinfo.h: New file.
* sysdeps/unix/sysv/linux/i386/dl-procinfo.c (PROCINFO_CLASS):
Define if not yet defined. Use it instead of EXTERN. Undefine
at the end of the file.
* sysdeps/unix/sysv/linux/arm/dl-procinfo.c (PROCINFO_CLASS):
Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/dl-procinfo.c
(PROCINFO_CLASS): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/dl-procinfo.c
(PROCINFO_CLASS): Likewise.
2003-07-22 H.J. Lu <hongjiu.lu@intel.com>
* elf/ldconfig.c (main): Issue a fatal error if relative path
is used to build cache.
2003-07-22 Ulrich Drepper <drepper@redhat.com>
* elf/readlib.c (process_file): Avoid possible overflow in assignment.
2003-04-29 Ulrich Drepper <drepper@redhat.com>
* sysdeps/i386/fpu/Makefile: New file.
* sysdeps/i386/fpu/fedisblxcpt.c: Also set SSE control word.
* sysdeps/i386/fpu/feenablxcpt.c: Likewise.
* sysdeps/i386/fpu/feholdexcpt.c: Likewise.
* sysdeps/i386/fpu/fesetround.c: Also set SSE rounding mode
[PR libc/4987].
* sysdeps/i386/fpu/s_nextafterl.c: Decrement high word of mantissa
of demorm correctly if low word is zero.
Reported by Fred J. Tydeman <tydeman@tybor.com>.
2002-07-06 Bruno Haible <bruno@clisp.org>
* sysdeps/i386/fpu/libm-test-ulps: Add some ulps for AMD K7.
* rt/Makefile (tests): Don't add tst-aio* in a single-threaded build.
* sysdeps/unix/bsd/sun/sunos4/bits/utsname.h: Test for _SYS_UTSNAME_H,
not _UTSNAME_H.
* sysdeps/unix/bsd/ultrix4/bits/utsname.h: Likewise.
* sysdeps/generic/bits/stropts.h: Protect against direct inclusion.
* sysdeps/generic/bits/ustat.h: Likewise.
* sysdeps/unix/sysv/linux/bits/statvfs.h (ST_NODIRATIME): Set to
2048.
2002-06-30 Ulrich Drepper <drepper@redhat.com>
* math/libm-test.inc (cexp_test): Add missing L suffix for
expected result. Reported by Stephen L Moshier <steve@moshier.net>.
* sysdeps/i386/fpu/libm-test-ulps: Adjust error for cexp (0.75 +
1.25 i).
2002-06-20 Andreas Jaeger <aj@suse.de>
* math/libm-test.inc: Use exact values as input parameters,
compute output parameters with 36 digits for 128-bit long doubles.
* sysdeps/i386/fpu/libm-test-ulps: Regenerated.
* sysdeps/x86-64/fpu/libm-test-ulps: Regenerated.
2002-06-13 Stephen L Moshier <steve@moshier.net>
* sysdeps/ieee754/ldbl-96/s_scalbnl.c: Fix cases in which
argument or result is subnormal.
2002-06-19 Ulrich Drepper <drepper@redhat.com>
* sysdeps/i386/fpu/s_remquo.S: Fix three mistakes in computing the
quotient.
* sysdeps/i386/fpu/s_remquof.S: Likewise.
* sysdeps/i386/fpu/s_remquol.S: Likewise.
* sysdeps/hppa/dl-machine.h: Don't use multi-line string literals.
* sysdeps/unix/sysv/linux/alpha/sendfile64.c: New file.
* sysdeps/unix/sysv/linux/ia64/sendfile64.c: New file.
* sysdeps/unix/sysv/linux/sparc/sparc64/sendfile64.c: New file.
* sysdeps/unix/sysv/linux/x86_64/sendfile64.c: New file.
* sysdeps/mach/hurd/chown.c: Use INTDEF for __chown.
* sysdeps/unix/sysv/aix/chown.c: Likewise.
* sysdeps/unix/grantpt.c: Use INTUSE for __chown calls.
* sysdeps/unix/sysv/linux/m68k/chown.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/chown.c: Likewise.
* sysdeps/unix/sysv/linux/i386/chown.c: Use INTDEF2 to define
__chown_internal.
* sysdeps/unix/sysv/linux/s390/s390-32//chown.c: Likewise.
* intl/dcngettext.c [_LIBC]: Use INTUSE for __dcngettext.
* intl/dngettext.c [_LIBC] (DCNGETTEXT): Use INTUSE.
* intl/ngettext.c: Likewise.
* include/sys/socket.h: Declare __connect_internal and define
__connect macro if not NOT_IN_libc.
* sysdeps/mach/hurd/connect.c: Use INTDEF for __connect.
* sysdeps/unix/sysv/aix/connect.c: Likewise.
* sysdeps/unix/sysv/linux/connect.S: Add __connect_internal alias.
* include/unistd.h: Declare __close_internal and define __close macro
if not NOT_IN_libc.
* libio/libioP.h (JUMO0, JUMP1, JUMP2, JUMP3, WJUMP0, WJUMP1, WJUMP2,
WJUMP3): Add extra parenthesis to avoid expanding element names with
macors like __close.
* sysdeps/unix/syscalls.list: Add __close_internal alias.
* include/unistd.h: Declare __dup2_internal and define __dup2 macro
if not NOT_IN_libc.
* sysdeps/mach/hurd/dup2.c: Use INTDEF for __dup2.
* sysdeps/posix/dup2.c: Use INTDEF for __dup2.
* sysdeps/unix/syscalls.list: Add __dup2_internal alias.
* include/unistd.h: Declare __fork_internal and define __fork macro
if not NOT_IN_libc.
* sysdeps/mach/hurd/fork.c: Use INTDEF for __fork.
* sysdeps/unix/sysv/aix/fork.c: Likewise.
* sysdeps/unix/sysv/linux/syscalls.list: Add __fork_internal alias.
* include/stdio_ext.h: Declare __fsetlocking_internal and define
__fsetlocking macro to use it if not NOT_IN_libc.
* libio/__fsetlocking.c: Use INTDEF for __fsetlocking.
* libio/__fbufsize.c: Correct copyright.
* libio/__flbf.c: Likewise.
* libio/__fpending.c: Likewise.
* libio/__fpurge.c: Likewise.
* libio/__freadable.c: Likewise.
* libio/__freading.c: Likewise.
* libio/__fsetlocking.c: Likewise.
* libio/__fwritable.c: Likewise.
* libio/__fwriting.c: Likewise.
* include/stdio.h: Declare __asprintf_internal and define __asprintf
macro to use it if not NOT_IN_libc.
* stdio-common/asprintf.c: Use INTDEF for __asprintf.
* include/mntent.h: Declare __setmntent_internal,
__getmntent_r_internal, __endmntent_internal. Define __setmntent,
__getmntent_r, and __endmntent macros to use these functions if not
NOT_IN_libc.
* misc/mntent_r.c: Use INTDEF for __setmntent, __getmntent_r, and
__endmntent.
* include/math.h: Declare __finite_internal, __finitef_internal, and
__finitel_internal. Redefine isfinite macro if in libc or libm using
these functions.
* sysdeps/generic/s_ldexp.c: Use INTUSE for __finite calls.
* sysdeps/generic/s_ldexpf.c: Use INTUSE for __finitef calls.
* sysdeps/generic/s_ldexpl.c: Use INTUSE for __finitel calls.
* sysdeps/i386/fpu/s_finite.S: Define _internal alias.
* sysdeps/i386/fpu/s_finitef.S: Likewise.
* sysdeps/i386/fpu/s_finitel.S: Likewise.
* sysdeps/ieee754/dbl-64/s_finite.c: Likewise.
* sysdeps/ieee754/flt-32/s_finitef.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_finitel.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_finitel.c: Likewise.
* include/fcntl.h: Declare __fcntl_internal. Define __fcntl macro
to use this function if not NOT_IN_libc.
* libio/iofdopen.c (_IO_fcntl): Use INTUSE.
* sysdeps/generic/fcntl.c: Use INTDEF for __fcntl.
* sysdeps/mach/hurd/fcntl.c: Likewise.
* sysdeps/unix/sysv/aix/fcntl.c: Likewise.
* sysdeps/unix/sysv/linux/i386/fcntl.c: Likewise.
* include/argz.h: Declare __argz_count_internal and
__argz_stringify_internal.
* intl/l10nflist.c [_LIBC]: Use INTUSE for __argz_count and
__argz_stringify.
* string/argz-count.c: Use INTDEF for __argz_count.
* string/argz-stringify.c: Use INTDEF for __argz_stringify.
* include/stdlib.h: Declare __cxa_atexit_internal and define
__cxa_atexit macro if not NOT_IN_libc.
* stdlib/cxa_atexit.c: Use INTDEF for __cxa_atexit.
* dlfcn/Makefile: Define NOT_IN_libc when compiling modcxaatexit.c.
* assert/assert.c: Use INTDEF for __assert_fail.
* assert/__assert.c: Use INTUSE for call to __assert_fail.
* include/assert.h: Declare __assert_fail_internal.
2002-04-02 Jakub Jelinek <jakub@redhat.com>
* inet/ether_ntoh.c (__nss_ethers_lookup): Add internal_function.
* inet/ether_hton.c (__nss_ethers_lookup): Likewise.
* inet/getnetgrent_r.c (__nss_netgroup_lookup): Likewise.
* sunrpc/netname.c (__nss_publickey_lookup): Likewise.
* sunrpc/publickey.c (__nss_publickey_lookup): Likewise.
2002-03-30 Jakub Jelinek <jakub@redhat.com>
* elf/dynamic-link.h (elf_get_dynamic_info): Don't abort on unknown
dynamic tags.
2002-03-29 Jakub Jelinek <jakub@redhat.com>
* sysdeps/i386/fpu/s_fabs.S: New file.
* sysdeps/i386/fpu/s_fabsf.S: New file.
* sysdeps/i386/fpu/s_fabsl.S: New file.
* sysdeps/sparc/sparc64/fpu/s_fabs.c: New file.
* sysdeps/sparc/sparc64/fpu/s_fabsf.c: New file.
* sysdeps/sparc/sparc64/fpu/s_fabsl.c: New file.
2002-04-02 Ulrich Drepper <drepper@redhat.com>
* rt/tst-shm.c (do_test): Add one more test for size of shared
memory object.
2002-03-29 Wolfram Gloger <wg@malloc.de>
* malloc/malloc.c: Add short description and prototypes for
malloc_get_state, malloc_set_state and posix_memalign, for
consistency and to avoid warnings with -Wstrict-prototypes.
Reported by Andreas Jaeger <aj@suse.de>.
2002-04-02 Ulrich Drepper <drepper@redhat.com>
* po/gl.po: Update from translation team.
* math/libm-test.inc (j0_test): Add extra tests.
* sysdeps/ieee754/ldbl-128/e_j0l.c (__ieee754_j0l): Use |x|,
not x, in Hankel approximation.
Patches by Stephen L Moshier.
2001-07-16 Andreas Schwab <schwab@suse.de>
* sysdeps/posix/spawni.c: Fix typo when iterating over signal numbers.
2001-07-16 Andreas Schwab <schwab@suse.de>
* math/libm-test.inc (check_float_internal): Fix sign bit test of
infinities.
2001-07-16 Jakub Jelinek <jakub@redhat.com>
* sysdeps/i386/fpu/e_expl.c (__ieee754_expl): Make it PIC friendly.
2001-07-06 Paul Eggert <eggert@twinsun.com>
* manual/argp.texi: Remove ignored LGPL copyright notice; it's
not appropriate for documentation anyway.
* manual/libc-texinfo.sh: "Library General Public License" ->
"Lesser General Public License".
2001-07-06 Andreas Jaeger <aj@suse.de>
* All files under GPL/LGPL version 2: Place under LGPL version
2.1.
2001-06-14 Roland McGrath <roland@frob.com>
* configure.in: Let sysdeps Implies files in add-ons bring in
sysdeps directories from the main source and other add-ons too.
2001-06-15 Jakub Jelinek <jakub@redhat.com>
* math/test-misc.c (main): Add tests for nextafter and nexttoward
with +-Inf as second argument.
* sysdeps/generic/s_nexttowardf.c (__nexttowardf): Only check for
NaN, not Inf.
* sysdeps/i386/fpu/s_nextafterl.c (__nextafterl): Fix check for NaN.
* sysdeps/i386/fpu/s_nexttoward.c: New.
* sysdeps/i386/fpu/s_nexttowardf.c: New.
* sysdeps/ieee754/ldbl-96/s_nexttoward.c (__nexttoward): Simplify
check for NaN, optimize x==+-0 handling.
* sysdeps/ieee754/ldbl-96/s_nexttowardf.c (__nexttowardf): Likewise.
* sysdeps/ieee754/ldbl-96/s_nextafterl.c (__nextafterl): Simplify
check for NaN, fix sign in x==+-0 case.
* sysdeps/ia64/fpu/s_nexttoward.c: New.
* sysdeps/ia64/fpu/s_nexttowardf.c: New.
2001-06-15 H.J. Lu <hjl@gnu.org>
* rt/tst-aio2.c (do_test): Initialize cb.aio_offset to 0.
* rt/tst-aio3.c (do_test): Likewise.
* rt/tst-aio4.c (do_test): Likewise.
* rt/tst-aio5.c (do_test): Likewise.
* rt/tst-aio6.c (do_test): Likewise.
2001-06-04 Bruno Haible <haible@clisp.cons.org>
* iconv/loop.c (UNICODE_TAG_HANDLER): New macro.
* iconv/gconv_simple.c (__gconv_transform_internal_ascii): Invoke
UNICODE_TAG_HANDLER.
(__gconv_transform_internal_ucs2): Likewise.
(__gconv_transform_internal_ucs2reverse): Likewise.
* iconvdata/8bit-gap.c (BODY for TO_LOOP): Invoke UNICODE_TAG_HANDLER.
* iconvdata/8bit-generic.c (BODY for TO_LOOP): Likewise.
* iconvdata/ansi_x3.110.c (BODY for TO_LOOP): Likewise.
* iconvdata/big5.c (BODY for TO_LOOP): Likewise.
* iconvdata/big5hkscs.c (BODY for TO_LOOP): Likewise.
* iconvdata/cp1255.c (BODY for TO_LOOP): Likewise.
* iconvdata/cp1258.c (BODY for TO_LOOP): Likewise.
* iconvdata/euc-cn.c (BODY for TO_LOOP): Likewise.
* iconvdata/euc-jp.c (BODY for TO_LOOP): Likewise.
* iconvdata/euc-kr.c (BODY for TO_LOOP): Likewise.
* iconvdata/euc-tw.c (BODY for TO_LOOP): Likewise.
* iconvdata/gbk.c (BODY for TO_LOOP): Likewise.
* iconvdata/ibm930.c (BODY for TO_LOOP): Likewise.
* iconvdata/ibm932.c (BODY for TO_LOOP): Likewise.
* iconvdata/ibm933.c (BODY for TO_LOOP): Likewise.
* iconvdata/ibm935.c (BODY for TO_LOOP): Likewise.
* iconvdata/ibm937.c (BODY for TO_LOOP): Likewise.
* iconvdata/ibm939.c (BODY for TO_LOOP): Likewise.
* iconvdata/ibm943.c (BODY for TO_LOOP): Likewise.
* iconvdata/iso646.c (BODY for TO_LOOP): Likewise.
* iconvdata/iso8859-1.c (BODY for TO_LOOP): Likewise.
* iconvdata/iso_6937.c (BODY for TO_LOOP): Likewise.
* iconvdata/iso_6937-2.c (BODY for TO_LOOP): Likewise.
* iconvdata/iso-2022-cn.c (BODY for TO_LOOP): Likewise.
* iconvdata/iso-2022-cn-ext.c (BODY for TO_LOOP): Likewise.
* iconvdata/iso-2022-kr.c (BODY for TO_LOOP): Likewise.
* iconvdata/johab.c (BODY for TO_LOOP): Likewise.
* iconvdata/sjis.c (BODY for TO_LOOP): Likewise.
* iconvdata/t.61.c (BODY for TO_LOOP): Likewise.
* iconvdata/uhc.c (BODY for TO_LOOP): Likewise.
* iconvdata/unicode.c (BODY for TO_LOOP): Likewise.
* iconvdata/iso-2022-jp.c (TAG_none, TAG_language, TAG_language_j,
TAG_language_ja, TAG_language_k, TAG_language_ko, TAG_language_z,
TAG_language_zh, CURRENT_TAG_MASK): New enum values.
(EMIT_SHIFT_TO_INIT): Don't emit an escape sequence if ASCII_set
is already selected but set2 or tag are set.
(conversion): New enum type.
(cvlist_t): New type.
(CVLIST, CVLIST_FIRST, CVLIST_REST): New macros.
(conversion_lists): New array.
(BODY for TO_LOOP): Keep track of Unicode 3.1 language tag. If "ja",
prefer conversion to Japanese character sets. If "zh", prefer
conversion to GB2312. If "ko", prefer conversion to KSC5601. Small
optimizations.
(INIT_PARAMS): Add tag.
(UPDATE_PARAMS): Add tag.
2001-06-04 Bruno Haible <haible@clisp.cons.org>
* locale/programs/locfile.c (write_locale_data): Before creat(),
unlink the file, to avoid crashing the processes that mmap it. Change
a double slash to a single slash. Free fname in case of error return.
2001-06-02 Jakub Jelinek <jakub@redhat.com>
* sysdeps/i386/fpu/s_frexpl.S (__frexpl): Mostly revert 2000-12-03
changes, do the special handling for denormal numbers, not for
normalized numbers (patch by <trevin@xmission.com>).
* math/test-misc.c (main): Test frexpl with denormal arguments.
2001-06-04 Jakub Jelinek <jakub@redhat.com>
* math/libm-test.inc (llround_test): Add two new llround tests.
* sysdeps/ieee754/ldbl-96/s_llroundl.c (__llroundl): Don't allow
overflow when rounding away from zero.
2001-06-04 Jakub Jelinek <jakub@redhat.com>
* math/Makefile (libm-calls): Add e_log2, w_log2, remove s_log2.
* math/math_private.h (__ieee754_log2, __ieee754_log2f,
__ieee754_log2l): New prototypes.
* sysdeps/generic/w_log2.c: New file.
* sysdeps/generic/w_log2f.c: New file.
* sysdeps/generic/w_log2l.c: New file.
* sysdeps/generic/s_log2l.c: Move...
* sysdeps/generic/e_log2l.c: ...to here. Rename to __ieee754_log2l.
* sysdeps/ieee754/k_standard.c (__kernel_standard): Handle log2(0)
and log2(x < 0).
* sysdeps/i386/fpu/s_log2.S: Move...
* sysdeps/i386/fpu/e_log2.S: ...to here. Rename to __ieee754_log2.
* sysdeps/i386/fpu/s_log2f.S: Move...
* sysdeps/i386/fpu/e_log2f.S: ...to here. Rename to __ieee754_log2f.
* sysdeps/i386/fpu/s_log2l.S: Move...
* sysdeps/i386/fpu/e_log2l.S: ...to here. Rename to __ieee754_log2l.
* sysdeps/m68k/fpu/s_log2.S: Move...
* sysdeps/m68k/fpu/e_log2.S: ...to here. Rename to __ieee754_log2.
* sysdeps/m68k/fpu/s_log2f.S: Move...
* sysdeps/m68k/fpu/e_log2f.S: ...to here. Rename to __ieee754_log2f.
* sysdeps/m68k/fpu/s_log2l.S: Move...
* sysdeps/m68k/fpu/e_log2l.S: ...to here. Rename to __ieee754_log2l.
* sysdeps/ieee754/dbl-64/s_log2.c: Move...
* sysdeps/ieee754/dbl-64/e_log2.c: ...to here. Rename to
__ieee754_log2.
* sysdeps/ieee754/flt-32/s_log2f.c: Move...
* sysdeps/ieee754/flt-32/e_log2f.c: ...to here. Rename to
__ieee754_log2f.
2001-06-04 Jakub Jelinek <jakub@redhat.com>
* sysdeps/generic/w_exp2.c (u_threshold): Lower threshold so that
even arguments which result in denormalized exp2 are accepted.
(__exp2): Arguments equal to u_threshold already result into
underflow.
* sysdeps/generic/w_exp2f.c (u_threshold, __exp2f): Likewise.
* sysdeps/generic/w_exp2l.c (u_threshold, __exp2l): Likewise.
* sysdeps/ieee754/dbl-64/e_exp2.c (__ieee754_exp2): Lomark was too
low, with corrected lowmark use greaterequal, not greater.
* sysdeps/ieee754/flt-32/e_exp2f.c (__ieee754_exp2f): Likewise.
2001-06-04 Jakub Jelinek <jakub@redhat.com>
* math/libm-test.inc (ilogb_test): Test that ilogb(+-Inf) == INT_MAX.
* sysdeps/i386/fpu/s_ilogb.S (__ilogb): Return INT_MAX for +-Inf.
* sysdeps/i386/fpu/s_ilogbf.S (__ilogbf): Likewise.
* sysdeps/i386/fpu/s_ilogbl.S (__ilogbl): Likewise.
* sysdeps/ieee754/dbl-64/s_ilogb.c (__ilogb): Likewise.
* sysdeps/ieee754/flt-32/s_ilogbf.c (__ilogbf): Likewise.
* sysdeps/ieee754/ldbl-128/s_ilogbl.c (__ilogbl): Likewise.
* sysdeps/ieee754/ldbl-96/s_ilogbl.c (__ilogbl): Likewise.
2001-06-04 Jakub Jelinek <jakub@redhat.com>
* sysdeps/generic/w_coshl.c (__coshl): Test if finite argument
gave non-finite result instead of using constant in generic
version.
* sysdeps/generic/w_coshf.c (__coshf): Likewise.
* sysdeps/generic/w_cosh.c (__cosh): Likewise.
* sysdeps/generic/w_exp10.c (o_threshold, u_threshold): Remove.
(__exp10): Test if finite argument gave non-finite result.
* sysdeps/generic/w_exp10f.c (o_threshold, u_threshold, __exp10f):
Likewise.
* sysdeps/generic/w_exp10l.c (o_threshold, u_threshold, __exp10l):
Likewise.
2001-06-04 Jakub Jelinek <jakub@redhat.com>
* sysdeps/ieee754/ldbl-96/e_coshl.c (__ieee754_coshl): Fix
overflow threshold constant (log(LDBL_MAX)+M_LN2l).
2001-05-29 Bruno Haible <haible@clisp.cons.org>
* locale/programs/ld-ctype.c (idx_table): New struct type.
(idx_table_init, idx_table_get, idx_table_add): New functions.
(MAX_CHARNAMES_IDX): Remove macro.
(locale_ctype_t): Change type of charnames_idx field.
(ctype_startup): Change initialization of charnames_idx field.
(find_idx): Use idx_table_get and idx_table_add for speed.
* locale/programs/charmap.c (charmap_new_char): Fix ucs4 value
computation of characters in a range.
2001-05-29 Bruno Haible <haible@clisp.cons.org>
* iconvdata/gb18030.c (__fourbyte_to_ucs1): Add mappings for <U03F4>,
<U03F5>.
(__ucs_to_gb18030_tab1): Likewise.
(BODY for FROM_LOOP): Add mapping for <U00010000>..<U0010FFFF>.
(BODY for TO_LOOP): Likewise.
* iconvdata/tst-table-charmap.sh: Update for charmaps containing
<U00xxxxxx> syntax.
* iconvdata/tst-table-from.c (bmp_only): New variable.
(utf8_decode): If bmp_only, don't return characters outside Unicode
plane 0.
(main): When testing UTF-8 or GB18030, set bmp_only to 1. Don't print
a conversion line if utf8_decode returns NULL.
* iconvdata/tst-table-to.c (main): When testing encodings other than
UTF-8 and GB18030, loop upto U+30000 instead of U+10000. Use UTF-8
instead of UCS-2 as input.
* iconvdata/tst-table.sh: For GB18030, use only the part < 0x10000
of the charmap.
2001-05-29 Bruno Haible <haible@clisp.cons.org>
* iconvdata/cns11643l1.c: Update to Unicode 3.1.
(__cns11643l1_to_ucs4_tab): Regenerated.
(__cns11643l1_from_ucs4_tab12): Regenerated.
* iconvdata/cns11643.c: Update to Unicode 3.1.
(__cns11643l14_to_ucs4_tab): Remove array.
(__cns11643l3_to_ucs4_tab, __cns11643l4_to_ucs4_tab,
__cns11643l5_to_ucs4_tab, __cns11643l6_to_ucs4_tab,
__cns11643l7_to_ucs4_tab, __cns11643l15_to_ucs4_tab): New arrays.
(__cns11643_from_ucs4p0_tab): Renamed from __cns11643_from_ucs4_tab.
(__cns11643_from_ucs4p2_tab): New array.
* iconvdata/cns11643.h (__cns11643l14_to_ucs4_tab): Remove declaration.
(__cns11643l3_to_ucs4_tab, __cns11643l4_to_ucs4_tab,
__cns11643l5_to_ucs4_tab, __cns11643l6_to_ucs4_tab,
__cns11643l7_to_ucs4_tab, __cns11643l15_to_ucs4_tab): New declarations.
(cns11643_to_ucs4): Treat planes 3, 4, 5, 6, 7, 15 instead of 14.
(__cns11643_from_ucs4_tab): Remove declaration.
(__cns11643_from_ucs4p0_tab, __cns11643_from_ucs4p2_tab): New
declarations.
(ucs4_to_cns11643): Update for new arrays. Treat U+3400..U+4DFF and
U+20000..U+2A6D6.
* iconvdata/cns11643l2.h (__cns11643_from_ucs4_tab): Remove
declaration.
(__cns11643_from_ucs4p0_tab): New declaration.
(ucs4_to_cns11643l2): Update for new arrays.
* iconvdata/iso-2022-cn-ext.c (BODY for FROM_LOOP): Handle planes
3 to 7.
(BODY for TO_LOOP): Handle planes 3 to 7, instead of plane 14.
* iconvdata/EUC-TW.irreversible: New file.
* iconvdata/tst-table.sh: Use it.
* iconvdata/Makefile (distribute): Add CP1255.irreversible,
CP1258.irreversible, EUC-TW.irreversible.
2001-05-29 Bruno Haible <haible@clisp.cons.org>
* locale/C-translit.h.in: Add transliterations for new Unicode 3.1
mathematical symbols.
