Paul Pluzhnikov
6909d27675
Fix BZ #17916 - fopen unbounded stack usage for ccs= modes
2015-02-24 08:05:34 -08:00
Paul Pluzhnikov
8ae4bb5a38
Cleanup: add missing #include's
...
* libio/fileops.c: Add missing sys/mman.h
* libio/iopopen.c: Add missing fcntl.h, remove redundant unistd.h
2015-02-17 16:03:41 -08:00
Joseph Myers
b168057aaa
Update copyright dates with scripts/update-copyrights.
2015-01-02 16:29:47 +00:00
Siddhesh Poyarekar
24b9788285
Fix up function definition style
...
Don't use K&R style for function definitions.
2014-12-04 08:45:55 +05:30
Siddhesh Poyarekar
fe8b4d98e9
Reset cached offset when reading to end of stream (BZ #17653 )
...
POSIX allows applications to switch file handles when a read results
in an end of file. Unset the cached offset at this point so that it
is queried again.
2014-12-04 08:13:28 +05:30
Siddhesh Poyarekar
be349d7042
ftell: seek to end only when there are unflushed bytes (BZ #17647 )
...
Currently we seek to end of file if there are unflushed writes or the
stream is in write mode, to get the current offset for writing in
append mode, which is the end of file. The latter case (i.e. stream
is in write mode, but no unflushed writes) is unnecessary since it
will only happen when the stream has just been flushed, in which case
the recorded offset ought to be reliable.
Removing that case lets ftell give the correct offset when it follows
an ftruncate. The latter truncates the file, but does not change the
file position, due to which it is permissible to call ftell without an
intervening fseek call.
Tested on x86_64 to verify that the added test case fails without the
patch and succeeds with it, and that there are no additional
regressions due to it.
[BZ #17647 ]
* libio/fileops.c (do_ftell): Seek only when there are
unflushed writes.
* libio/wfileops.c (do_ftell_wide): Likewise.
* libio/tst-ftell-active-handler.c (do_ftruncate_test): New
test case.
(do_one_test): Call it.
2014-12-04 08:08:37 +05:30
Florian Weimer
ba7b4d294b
Complete the removal of __gconv_translit_find
...
Prior to the 2.20 release, the function was just changed to fail
unconditionally, in commit a1a6a401ab
2014-09-12 09:17:32 +02:00
Siddhesh Poyarekar
2482ae433a
Fix offset computation for append+ mode on switching from read (BZ #16724 )
...
The offset computation in write mode uses the fact that _IO_read_end
is kept in sync with the external file offset. This however is not
true when O_APPEND is in effect since switching to write mode ought to
send the external file offset to the end of file without making the
necessary adjustment to _IO_read_end.
Hence in append mode, offset computation when writing should only
consider the effect of unflushed writes, i.e. from _IO_write_base to
_IO_write_ptr.
The wiki has a detailed document that describes the rationale for
offsets returned by ftell in various conditions:
https://sourceware.org/glibc/wiki/File%20offsets%20in%20a%20stdio%20stream%20and%20ftell
2014-05-27 13:54:19 +05:30
Siddhesh Poyarekar
ea33158c96
Fix offset caching for streams and use it for ftell (BZ #16680 )
...
The ftell implementation was made conservative to ensure that
incorrectly cached offsets never affect it. However, this causes
problems for append mode when a file stream is rewound. Additionally,
the 'clever' trick of using stat to get position for append mode files
caused more problems than it solved and broke old behavior. I have
described the various problems that it caused and then finally the
solution.
For a and a+ mode files, rewinding the stream should result in ftell
returning 0 as the offset, but the stat() trick caused it to
(incorrectly) always return the end of file. Now I couldn't find
anything in POSIX that specifies the stream position after rewind()
for a file opened in 'a' mode, but for 'a+' mode it should be set to
0. For 'a' mode too, it probably makes sense to keep it set to 0 in
the interest of retaining old behavior.
The initial file position for append mode files is implementation
defined, so the implementation could either retain the current file
position or move the position to the end of file. The earlier ftell
implementation would move the offset to end of file for append-only
mode, but retain the old offset for a+ mode. It would also cache the
offset (this detail is important). My patch broke this and would set
the initial position to end of file for both append modes, thus
breaking old behavior. I was ignorant enough to write an incorrect
test case for it too.
The Change:
I have now brought back the behavior of seeking to end of file for
append-only streams, but with a slight difference. I don't cache the
offset though, since we would want ftell to query the current file
position through lseek while the stream is not active. Since the
offset is moved to the end of file, we can rely on the file position
reported by lseek and we don't need to resort to the stat() nonsense.
Finally, the cache is always reliable, except when there are unflished
writes in an append mode stream (i.e. both a and a+). In the latter
case, it is safe to just do an lseek to SEEK_END. The value can be
safely cached too, since the file handle is already active at this
point. Incidentally, this is the only state change we affect in the
file handle (apart from taking locks of course).
I have also updated the test case to correct my impression of the
initial file position for a+ streams to the initial behavior. I have
verified that this does not break any existing tests in the testsuite
and also passes with the new tests.
2014-03-17 21:23:56 +05:30
Siddhesh Poyarekar
fa3cd24827
Use cached offset in ftell when reliable
...
The cached offset is reliable to use in ftell when the stream handle
is active. We can consider a stream as being active when there is
unflushed data. However, even in this case, we can use the cached
offset only when the stream is not being written to in a+ mode,
because this case may have unflushed data and a stale offset; the
previous read could have sent it off somewhere other than the end of
the file.
There were a couple of adjustments necessary to get this to work.
Firstly, fdopen now ceases to use _IO_attach_fd because it sets the
offset cache to the current file position. This is not correct
because there could be changes to the file descriptor before the
stream handle is activated, which would not get reflected.
A similar offset caching action is done in _IO_fwide, claiming that
wide streams have 'problems' with the file offsets. There don't seem
to be any obvious problems with not having the offset cache available,
other than that it will have to be queried in a subsequent
read/write/seek. I have removed this as well.
The testsuite passes successfully with these changes on x86_64.
2014-03-04 12:23:28 +05:30
Siddhesh Poyarekar
000232b9bc
Separate ftell from fseek logic and avoid modifying FILE data ( #16532 )
...
ftell semantics are distinct from fseek(SEEK_CUR) especially when it
is called on a file handler that is not yet active. Due to this
caveat, much care needs to be taken while modifying the handler data
and hence, this first iteration on separating out ftell focusses on
maintaining handler data integrity at all times while it figures out
the current stream offset. The result is that it makes a syscall for
every offset request.
There is scope for optimizing this by caching offsets when we know
that the handler is active. A simple way to find out is when the
buffers have data. It is not so simple to find this out when the
buffer is empty without adding some kind of flag.
2014-03-04 07:45:58 +05:30
Ondřej Bílka
a1ffb40e32
Use glibc_likely instead __builtin_expect.
2014-02-10 15:07:12 +01:00
Allan McRae
d4697bc93d
Update copyright notices with scripts/update-copyrights
2014-01-01 22:00:23 +10:00
Eric Biggers
3d110c7c6e
Fix fwrite() reading beyond end of buffer in error path
...
Partially revert commits 2b766585f9de2fd463b1
2013-10-11 22:29:38 +05:30
Joseph Myers
2e09a79ada
Avoid use of "register" as optimization hint.
2013-06-07 22:24:35 +00:00
Joseph Myers
568035b787
Update copyright notices with scripts/update-copyrights.
2013-01-02 19:05:09 +00:00
Mike Frysinger
eb6cbd249f
[BZ #12724 ] libio: revert partial POSIX 2008 fclose support
...
In BZ #12724 , partial support for POSIX 2008 fclose behavior was added.
Since it isn't entirely conforming to the spec, some applications are
known to be breaking in this intermediate state. So revert the partial
support until we can get things fully implemented.
This reverts commit fcabc0f8b1
2012-12-01 21:37:52 -05:00
Siddhesh Poyarekar
2b766585f9
printf should return negative value on error
...
[BZ #11741 ]
Fixed bug where printf and family may return a spurious success when
printing padded formats.
2012-11-16 19:13:11 +05:30
Joseph Myers
ced52c719c
Remove _G_OPEN64, _G_LSEEK64, _G_MMAP64, _G_FSTAT64 from _G_config.h.
2012-10-18 18:50:43 +00:00
Joseph Myers
c8450f70fa
Remove _G_off64_t and _G_stat64 from _G_config.h.
2012-10-09 15:09:32 +00:00
Siddhesh Poyarekar
adb26faefe
Don't flush write buffer for ftell
...
[BZ #5298 ]
Use write pointer state along with the file offset and/or the read
pointers to get the current file position.
2012-09-28 18:38:14 +05:30
Siddhesh Poyarekar
2b4f00d1a4
Fix minor typos in comments
2012-09-25 09:28:43 +05:30
Siddhesh Poyarekar
1ffb8c9001
Fix typos in comments
...
* libio/fileops.c: Fix typos in comments.
* libio/oldfileops.c: Likewise.
* libio/wfileops.c: Likewise.
2012-09-05 22:04:57 +05:30
Andreas Schwab
d18ea0c5e6
Remove use of INTDEF/INTUSE in libio
2012-05-24 23:06:20 +02:00
Thomas Schwinge
37233df9d1
Hurd: #include <kernel-features.h>
2012-05-10 15:57:24 -07:00
David S. Miller
20fde22738
Remove xsputn small copy optimization.
...
* libio/fileops.c (_IO_new_file_xsputn): Don't try to optimize
small copies by hand.
2012-03-29 14:38:27 -07:00
Paul Eggert
59ba27a63a
Replace FSF snail mail address with URLs.
2012-02-09 23:18:22 +00:00
Joseph Myers
c8a89e7dd5
Remove miscellaneous __STDC__ conditionals.
2012-01-30 21:20:32 +00:00
Andreas Jaeger
a101b025af
Fix fopen (non-existing-file, "re") errno
2011-08-20 09:12:49 -04:00
H.J. Lu
0a197a9dfe
Fix fileops.c build for old kernels
2011-05-17 01:45:49 -04:00
Ulrich Drepper
94b7cc3711
Fix a few problems in fopen and freopen
...
fopen should set the FD_CLOEXEC flag if requested evenif the kernel does
not support an aotmic operation.
freopen should reuse the file descriptor for the stream. This is
especially important for calls to change the standard streams (stin,
stdout, stderr).
2011-05-15 15:28:46 -04:00
Ulrich Drepper
ca408c157c
Initialize variable in _IO_new_file_close_it
...
The last change left a variable in some situations uninitialized.
2011-05-14 10:59:54 -04:00
Ulrich Drepper
fcabc0f8b1
Fix file descriptor position after fclose
...
fclose should leave the file descriptor position after the last read
or written byte.
2011-05-13 21:08:45 -04:00
Eric Blake
b722481ac2
Use al possible bytes from fopen mode string.
2011-04-22 23:40:57 -04:00
Jim Meyering
ded5b9b7c7
Remove doubled words.
2011-04-22 21:34:32 -04:00
Ulrich Drepper
0d74e04361
(_IO_new_file_fopen): Don't prematurely stop parsing mode string.
2009-06-09 06:59:02 -07:00
Ulrich Drepper
11ed3eaed9
* sysdeps/unix/sysv/linux/bits/socket.h: Define PF_ISDN and AF_ISDN.
...
* sysdeps/unix/sysv/linux/sparc/bits/socket.h: Likewise.
2008-07-27 08:25:37 +00:00
Ulrich Drepper
c4a710b6b0
[BZ #6771 ]
...
* libio/fileops.c (_IO_new_file_attach): Preserve errno around
success call of _IO_SEEKOFF or calls which failed because the
descriptor is for a pipe.
2008-07-26 23:42:14 +00:00
Ulrich Drepper
65d834b0ad
(_IO_new_file_fopen): Recognize 'e' flag and set O_CLOEXEC is needed.
2007-07-22 18:37:10 +00:00
Ulrich Drepper
0fca3153e7
* libio/libio.h (__underflow, __uflow, __overflow, __wunderflow,
...
__wuflow, __woverflow, _IO_getc, _IO_putc, _IO_peekc_locked, _IO_padn,
_IO_sgetn, _IO_seekoff, _IO_seekpos, _IO_getwc, _IO_putwc, _IO_wpadn):
Remove __THROW.
* libio/fileops.c (new_do_write, _IO_file_xsgetn_mmap,
_IO_file_xsgetn_maybe_mmap): Likewise.
* libio/oldfileops.c (old_do_write): Likewise.
* libio/libioP.h (_IO_switch_to_get_mode, _IO_switch_to_wget_mode,
_IO_init_marker, _IO_init_wmarker, _IO_default_uflow,
_IO_wdefault_uflow, _IO_default_setbuf, _IO_default_seekpos,
_IO_do_write, _IO_new_do_write, _IO_old_do_write, _IO_wdo_write,
_IO_flush_all_lockp, _IO_flush_all, _IO_cleanup,
_IO_flush_all_linebuffered, _IO_new_fgetpos, _IO_old_fgetpos,
_IO_new_fsetpos, _IO_old_fsetpos, _IO_new_fgetpos64,
_IO_old_fgetpos64, _IO_new_fsetpos64, _IO_old_fsetpos64,
_IO_file_setbuf, _IO_file_seekoff, _IO_file_xsputn, _IO_file_xsgetn,
_IO_file_underflow, _IO_file_underflow_mmap,
_IO_file_underflow_maybe_mmap, _IO_file_overflow, _IO_file_attach,
_IO_file_open, _IO_file_fopen, _IO_file_write, _IO_file_read,
_IO_file_sync, _IO_file_close_it, _IO_file_finish,
_IO_new_file_attach, _IO_new_file_close_it, _IO_new_file_finish,
_IO_new_file_fopen, _IO_new_file_setbuf, _IO_file_setbuf_mmap,
_IO_new_file_sync, _IO_new_file_underflow, _IO_new_file_overflow,
_IO_new_file_seekoff, _IO_new_file_write, _IO_new_file_xsputn,
_IO_old_file_setbuf, _IO_old_file_seekoff, _IO_old_file_xsputn,
_IO_old_file_underflow, _IO_old_file_overflow, _IO_old_file_attach,
_IO_old_file_fopen, _IO_old_file_write, _IO_old_file_sync,
_IO_old_file_close_it, _IO_old_file_finish, _IO_wfile_xsputn,
_IO_wfile_setbuf, _IO_wfile_sync, _IO_wfile_underflow,
_IO_wfile_overflow, _IO_wfile_seekoff, _IO_old_proc_open,
_IO_old_proc_close, _IO_getdelim, _IO_flush_all_internal,
_IO_adjust_column_internal, _IO_default_uflow_internal,
_IO_default_xsgetn_internal, _IO_wdefault_xsputn_internal,
_IO_wdefault_xsgetn_internal, _IO_wdefault_uflow_internal,
_IO_file_setbuf_internal, _IO_file_seekoff_internal,
_IO_file_xsputn_internal, _IO_file_xsgetn_internal,
_IO_file_close_it_internal, _IO_file_underflow_internal,
_IO_file_overflow_internal, _IO_file_attach_internal,
_IO_file_fopen_internal, _IO_file_sync_internal,
_IO_file_finish_internal, _IO_wfile_xsputn_internal,
_IO_wfile_seekoff_internal, _IO_wfile_sync_internal,
_IO_switch_to_wget_mode_internal, _IO_padn_internal,
_IO_switch_to_get_mode_internal, _IO_seekoff_unlocked,
_IO_seekpos_unlocked): Likewise.
(_IO_strtod, _IO_dtoa, _IO_outfloat, _IO_read, _IO_write,
_IO_lseek, _IO_close, _IO_fstat): Remove unused prototypes.
2007-04-16 23:15:58 +00:00
Ulrich Drepper
11bf311edc
[BZ #2510 , BZ #2830 , BZ #3137 , BZ #3313 , BZ #3426 , BZ #3465 , BZ #3480 , BZ #3483 , BZ #3493 , BZ #3514 , BZ #3515 , BZ #3664 , BZ #3673 , BZ #3674 ]
...
2007-01-11 Jakub Jelinek <jakub@redhat.com>
* sysdeps/i386/soft-fp/sfp-machine.h: Remove.
* sysdeps/x86_64/soft-fp/sfp-machine.h: Likewise.
2007-01-10 Ulrich Drepper <drepper@redhat.com>
* io/fts.c: Make sure fts_cur is always valid after return from
fts_read.
Patch by Miloslav Trmac <mitr@redhat.com>.
2006-10-27 Richard Sandiford <richard@codesourcery.com>
* elf/elf.h (R_MIPS_GLOB_DAT): Define.
(R_MIPS_NUM): Bump by 1.
2007-01-03 Jakub Jelinek <jakub@redhat.com>
* posix/execvp.c: Include alloca.h.
(allocate_scripts_argv): Renamed to...
(scripts_argv): ... this. Don't allocate buffer here nor count
arguments.
(execvp): Use alloca if possible.
* posix/Makefile: Add rules to build and run tst-vfork3 test.
* posix/tst-vfork3.c: New test.
* stdlib/Makefile (tst-strtod3-ENV): Define.
2007-01-02 Ulrich Drepper <drepper@redhat.com>
* posix/getconf.c: Update copyright year.
* nss/getent.c: Likewise.
* iconv/iconvconfig.c: Likewise.
* iconv/iconv_prog.c: Likewise.
* elf/ldconfig.c: Likewise.
* catgets/gencat.c: Likewise.
* csu/version.c: Likewise.
* elf/ldd.bash.in: Likewise.
* elf/sprof.c (print_version): Likewise.
* locale/programs/locale.c: Likewise.
* locale/programs/localedef.c: Likewise.
* nscd/nscd.c (print_version): Likewise.
* debug/xtrace.sh: Likewise.
* malloc/memusage.sh: Likewise.
* malloc/mtrace.pl: Likewise.
* debug/catchsegv.sh: Likewise.
2006-12-24 Ulrich Drepper <drepper@redhat.com>
* malloc/malloc.c (sYSMALLOc): Remove some unnecessary alignment
attempts.
2006-12-23 Ulrich Drepper <drepper@redhat.com>
* posix/wordexp.c: Remove some unnecessary tests.
2006-12-20 SUGIOKA Toshinobu <sugioka@itonet.co.jp>
* sysdeps/unix/sysv/linux/sh/bits/shm.h: New file.
* nss/getXXbyYY_r.c: Include atomic.h.
(INTERNAL (REENTRANT_NAME)): Write startp after start_fct,
add atomic_write_barrier () in between.
2006-11-28 Jakub Jelinek <jakub@redhat.com>
* elf/dl-support.c: Include dl-procinfo.h.
* sysdeps/powerpc/dl-procinfo.h (PPC_PLATFORM_POWER4,
PPC_PLATFORM_PPC970, PPC_PLATFORM_POWER5, PPC_PLATFORM_POWER5_PLUS,
PPC_PLATFORM_POWER6, PPC_PLATFORM_CELL_BE, PPC_PLATFORM_POWER6X):
Define.
(_dl_string_platform): Use PPC_PLATFORM_* macros instead of
hardcoded constants.
* sysdeps/powerpc/dl-procinfo.c (_dl_powerpc_platform): Use
PPC_PLATFORM_* macros for array designators.
2006-11-11 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/dl-procinfo.c (_dl_powerpc_cap_flags): Add 3 new cap
names to the beginning.
(_dl_powerpc_platforms): Add "power6x".
* sysdeps/powerpc/dl-procinfo.h (_DL_HWCAP_FIRST): Decrease.
(HWCAP_IMPORTANT): Add PPC_FEATURE_HAS_DFP.
(_DL_PLATFORMS_COUNT): Increase.
(_dl_string_platform): Handle power6x case.
* sysdeps/powerpc/sysdep.h (PPC_FEATURE_PA6T, PPC_FEATURE_HAS_DFP,
PPC_FEATURE_POWER6_EXT): Define.
(PPC_FEATURE_POWER5, PPC_FEATURE_POWER5_PLUS): Correct Comment.
[-2^31 .. 2^31) range.
* sysdeps/unix/sysv/linux/bits/statvfs.h: Define ST_RELATIME.
* sysdeps/unix/sysv/linux/internal_statvfs.c (__statvfs_getflags):
Handle relatime mount option.
2006-12-13 Jakub Jelinek <jakub@redhat.com>
* sysdeps/unix/sysv/linux/powerpc/powerpc32/setcontext.S: Include
kernel-features.h.
2006-12-11 Ulrich Drepper <drepper@redhat.com>
* stdlib/strtod_l.c (____STRTOF_INTERNAL): Parse thousand
separators also if no non-zero digits found.
* stdlib/Makefile (tests): Add tst-strtod3.
[BZ #3664 ]
* stdlib/strtod_l.c (____STRTOF_INTERNAL): Fix test to recognize
empty parsed strings.
* stdlib/Makefile (tests): Add tst-strtod2.
* stdlib/tst-strtod2.c: New file.
[BZ #3673 ]
* stdlib/strtod_l.c (____STRTOF_INTERNAL): Fix exp_limit
computation.
* stdlib/Makefile (tests): Add tst-atof2.
* stdlib/tst-atof2.c: New file.
[BZ #3674 ]
* stdlib/strtod_l.c (____STRTOF_INTERNAL): Adjust exponent value
correctly if removing trailing zero of hex-float.
* stdlib/Makefile (tests): Add tst-atof1.
* stdlib/tst-atof1.c: New file.
* misc/mntent_r.c (__hasmntopt): Check p[optlen] even when p == rest.
Start searching for next comma at p rather than rest.
* misc/Makefile (tests): Add tst-mntent2.
* misc/tst-mntent2.c: New test.
2006-12-08 Ulrich Drepper <drepper@redhat.com>
* malloc/memusage.c: Handle realloc with new size of zero and
non-NULL pointer correctly.
(me): Really write first record twice.
(struct entry): Make format bi-arch safe.
(dest): Write out more realloc statistics.
* malloc/memusagestat.c (struct entry): Make format bi-arch safe.
2006-12-05 Jakub Jelinek <jakub@redhat.com>
* nis/nis_subr.c (nis_getnames): Revert last change.
2006-12-03 Kaz Kojima <kkojima@rr.iij4u.or.jp>
* sysdeps/unix/sysv/linux/sh/sys/io.h: Removed.
2006-11-30 H.J. Lu <hongjiu.lu@intel.com>
* sysdeps/i386/i686/memcmp.S: Use jump table as the base of
jump table entries.
2006-11-30 Jan Kratochvil <jan.kratochvil@redhat.com>
* sysdeps/unix/sysv/linux/i386/clone.S: Provide CFI for the outermost
`clone' function to ensure proper unwinding stop of gdb.
* sysdeps/unix/sysv/linux/x86_64/clone.S: Likewise.
2006-12-01 Ulrich Drepper <drepper@redhat.com>
* nscd/nscd.init: Remove obsolete and commented-out -S option
handling.
2006-11-23 Jakub Jelinek <jakub@redhat.com>
[BZ #3514 ]
* manual/string.texi (strncmp): Fix pastos from wcscmp description.
[BZ #3515 ]
* manual/string.texi (strtok): Remove duplicate paragraph.
2006-12-01 Jan Kratochvil <jan.kratochvil@redhat.com>
* sysdeps/unix/sysv/linux/x86_64/sigaction.c: Fix compatibility with
libgcc not supporting `rflags' unwinding (register # >= 17).
2006-11-30 Jakub Jelinek <jakub@redhat.com>
* sunrpc/svc_run.c (svc_run): Set my_pollfd to new_pollfd if realloc
succeeded.
2006-11-29 Daniel Jacobowitz <dan@codesourcery.com>
Jakub Jelinek <jakub@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
* sysdeps/unix/sysv/linux/x86_64/sigaction.c (restore_rt): Add correct
unwind information.
* sysdeps/unix/sysv/linux/x86_64/Makefile: Provide symbols for
'restore_rt' even in the 'signal' directory.
* sysdeps/unix/sysv/linux/x86_64/ucontext_i.sym: Extend the regs list.
malloc crashed. Don't allocate memory unnecessarily in each
loop.
2006-10-21 Jakub Jelinek <jakub@redhat.com>
* resolv/mapv4v6addr.h (map_v4v6_address): Fix last change.
2006-11-20 Ulrich Drepper <drepper@redhat.com>
* resolv/mapv4v6addr.h (map_v4v6_address): Optimize a bit.
2006-11-18 Bruno Haible <bruno@clisp.org>
* sysdeps/unix/sysv/linux/i386/getgroups.c (__getgroups): Invoke
__sysconf only after having tried to call getgroups32.
2006-11-19 Ulrich Drepper <drepper@redhat.com>
* nss/nss_files/files-hosts.c (LINE_PARSER): Support IPv6-style
addresses for IPv4 queries if they can be mapped.
2006-11-16 Jakub Jelinek <jakub@redhat.com>
* sysdeps/x86_64/fpu/s_copysignf.S (__copysignf): Switch to .text.
* sysdeps/x86_64/fpu/s_copysign.S (__copysign): Likewise.
(signmask): Add .size directive.
(othermask): Add .type directive.
2006-11-14 Ulrich Drepper <drepper@redhat.com>
* po/nl.po: Update from translation team.
* timezone/zdump.c: Redo fix for BZ #3137 .
2006-11-14 Jakub Jelinek <jakub@redhat.com>
* nss/nss_files/files-alias.c (get_next_alias): Set line back
to first_unused after parsing :include: file.
* timezone/africa: Update from tzdata2006o.
* timezone/antarctica: Likewise.
* timezone/asia: Likewise.
* timezone/australasia: Likewise.
* timezone/backward: Likewise.
* timezone/europe: Likewise.
* timezone/iso3166.tab: Likewise.
* timezone/northamerica: Likewise.
* timezone/southamerica: Likewise.
* timezone/zone.tab: Likewise.
* time/tzfile.c (__tzfile_read): Extend to handle new file format
on machines with 64-bit time_t.
* timezone/checktab.awk: Update from tzcode2006o.
* timezone/ialloc.c: Likewise.
* timezone/private.h: Likewise.
* timezone/scheck.c: Likewise.
* timezone/tzfile.h: Likewise.
* timezone/tzselect.ksh: Likewise.
* timezone/zdump.c: Likewise.
* timezone/zic.c: Likewise.
[BZ #3483 ]
* elf/ldconfig.c (main): Call setlocale and textdomain.
Patch mostly by Benno Schulenberg <bensberg@justemail.net>.
[BZ #3480 ]
* manual/argp.texi: Fix typos.
* manual/charset.texi: Likewise.
* manual/errno.texi: Likewise.
* manual/filesys.texi: Likewise.
* manual/lang.texi: Likewise.
* manual/maint.texi: Likewise.
* manual/memory.texi: Likewise.
* manual/message.texi: Likewise.
* manual/resource.texi: Likewise.
* manual/search.texi: Likewise.
* manual/signal.texi: Likewise.
* manual/startup.texi: Likewise.
* manual/stdio.texi: Likewise.
* manual/sysinfo.texi: Likewise.
* manual/syslog.texi: Likewise.
* manual/time.texi: Likewise.
Patch by Ralf Wildenhues <Ralf.Wildenhues@gmx.de>.
[BZ #3465 ]
* sunrpc/clnt_raw.c: Minimal message improvements.
* sunrpc/pm_getmaps.c: Likewise.
* nis/nss_nisplus/nisplus-publickey.c: Likewise.
* nis/nis_print_group_entry.c: Likewise.
* locale/programs/repertoire.c: Likewise.
* locale/programs/charmap.c: Likewise.
* malloc/memusage.sh: Likewise.
* elf/dl-deps.c: Likewise.
* locale/programs/ld-collate.c: Likewise.
* libio/vswprintf.c: Likewise.
* malloc/memusagestat.c: Likewise.
* sunrpc/auth_unix.c: Likewise.
* sunrpc/rpc_main.c: Likewise.
* nscd/cache.c: Likewise.
* locale/programs/repertoire.c: Unify output messages.
* locale/programs/charmap.c: Likewise.
* locale/programs/ld-ctype.c: Likewise.
* locale/programs/ld-monetary.c: Likewise.
* locale/programs/ld-numeric.c: Likewise.
* locale/programs/ld-time.c: Likewise.
* elf/ldconfig.c: Likewise.
* nscd/selinux.c: Likewise.
* elf/cache.c: Likewise.
Patch mostly by Benno Schulenberg <bensberg@justemail.net>.
2006-11-10 Jakub Jelinek <jakub@redhat.com>
* string/strxfrm_l.c (STRXFRM): Fix trailing \1 optimization
if N is one bigger than return value.
* string/tst-strxfrm2.c (do_test): Also test strxfrm with l1 + 1
and l1 last arguments, if buf is defined, verify the return value
equals to strlen (buf) and verify no byte beyond passed length
is modified.
2006-11-10 Ulrich Drepper <drepper@redhat.com>
* po/sv.po: Update from translation team.
* sysdeps/gnu/siglist.c (__old_sys_siglist, __old_sys_sigabbrev):
Use __new_sys_siglist instead of _sys_siglist_internal as
second macro argument.
(_old_sys_siglist): Use declare_symbol_alias macro instead of
strong_alias.
2006-11-09 Ulrich Drepper <drepper@redhat.com>
[BZ #3493 ]
* posix/unistd.h (sysconf): Remove const attribute.
* sysdeps/posix/getaddrinfo.c (getaddrinfo): Fix test for
temporary or deprecated addresses.
Patch by Sridhar Samudrala <sri@us.ibm.com>.
* string/Makefile (tests): Add tst-strxfrm2.
* string/tst-strxfrm2.c: New file.
2006-10-09 Jakub Jelinek <jakub@redhat.com>
* elf/dl-debug.c (_dl_debug_initialize): Check r->r_map for 0
rather than r->r_brk.
* string/strxfrm_l.c (STRXFRM): Do the trailing \1 removal
optimization even if needed > n.
2006-11-07 Jakub Jelinek <jakub@redhat.com>
* include/libc-symbols.h (declare_symbol): Rename to...
(declare_symbol_alias): ... this. Add ORIGINAL argument, imply
strong_alias (ORIGINAL, SYMBOL) in asm to make sure it preceedes
.size directive.
* sysdeps/gnu/errlist-compat.awk: Adjust for declare_symbol_alias
changes.
* sysdeps/gnu/siglist.c: Likewise.
2006-11-03 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/fpu/bits/mathinline.h
[__LIBC_INTERNAL_MATH_INLINES]: Moved to ...
* sysdeps/powerpc/fpu/math_private.h: ...here. New file.
2006-11-05 Ulrich Drepper <drepper@redhat.com>
* sysdeps/unix/sysv/linux/i386/sysconf.c (intel_check_word):
Update handling of cache descriptor 0x49 for new models.
* sysdeps/unix/sysv/linux/x86_64/sysconf.c (intel_check_word):
Likewise.
2006-11-02 Ulrich Drepper <drepper@redhat.com>
* configure.in: Work around ld --help change and avoid -z relro
test completely if the architecture doesn't care about security.
2006-11-01 Ulrich Drepper <drepper@redhat.com>
* po/sv.po: Update from translation team.
2006-10-31 Ulrich Drepper <drepper@redhat.com>
* stdlib/atexit.c (atexit): Don't mark as hidden when used to
generate compatibility version.
2006-10-29 Ulrich Drepper <drepper@redhat.com>
* configure.in: Relax -z relro requirement a bit.
* po/sv.po: Update from translation team.
2006-10-29 Jakub Jelinek <jakub@redhat.com>
* elf/dl-sym.c (do_sym): Use RTLD_SINGLE_THREAD_P.
* elf/dl-runtime.c (_dl_fixup, _dl_profile_fixup): Likewise.
* elf/dl-close.c (_dl_close_worker): Likewise.
* elf/dl-open.c (_dl_open_worker): Likewise.
* sysdeps/generic/sysdep-cancel.h (RTLD_SINGLE_THREAD_P): Define.
* configure.in: Require assembler support for visibility, compiler
support for visibility and aliases, linker support for various -z
options.
* Makeconfig: Remove conditional code which now is unnecessary.
* config.h.in: Likewise.
* config.make.in: Likewise.
* dlfcn/Makefile: Likewise.
* elf/Makefile: Likewise.
* elf/dl-load.c: Likewise.
* elf/rtld.c: Likewise.
* include/libc-symbols.h: Likewise.
* include/stdio.h: Likewise.
* io/Makefile: Likewise.
* io/fstat.c: Likewise.
* io/fstat64.c: Likewise.
* io/fstatat.c: Likewise.
* io/fstatat64.c: Likewise.
* io/lstat.c: Likewise.
* io/lstat64.c: Likewise.
* io/mknod.c: Likewise.
* io/mknodat.c: Likewise.
* io/stat.c: Likewise.
* io/stat64.c: Likewise.
* libio/stdio.c: Likewise.
* nscd/Makefile: Likewise.
* stdlib/Makefile: Likewise.
* stdlib/atexit.c: Likewise.
* sysdeps/generic/ldsodefs.h: Likewise.
* sysdeps/i386/dl-machine.h: Likewise.
* sysdeps/i386/sysdep.h: Likewise.
* sysdeps/i386/i686/memcmp.S: Likewise.
* sysdeps/powerpc/powerpc32/sysdep.h: Likewise.
* sysdeps/unix/sysv/linux/i386/sigaction.c: Likewise.
* sysdeps/unix/sysv/linux/x86_64/sigaction.c: Likewise.
* Makerules: USE_TLS support is now default.
* tls.make.c: Likewise.
* csu/Versions: Likewise.
* csu/libc-start.c: Likewise.
* csu/libc-tls.c: Likewise.
* csu/version.c: Likewise.
* dlfcn/dlinfo.c: Likewise.
* elf/dl-addr.c: Likewise.
* elf/dl-cache.c: Likewise.
* elf/dl-close.c: Likewise.
* elf/dl-iteratephdr.c: Likewise.
* elf/dl-load.c: Likewise.
* elf/dl-lookup.c: Likewise.
* elf/dl-object.c: Likewise.
* elf/dl-open.c: Likewise.
* elf/dl-reloc.c: Likewise.
* elf/dl-support.c: Likewise.
* elf/dl-sym.c: Likewise.
* elf/dl-sysdep.c: Likewise.
* elf/dl-tls.c: Likewise.
* elf/ldconfig.c: Likewise.
* elf/rtld.c: Likewise.
* elf/tst-tls-dlinfo.c: Likewise.
* elf/tst-tls1.c: Likewise.
* elf/tst-tls10.h: Likewise.
* elf/tst-tls14.c: Likewise.
* elf/tst-tls2.c: Likewise.
* elf/tst-tls3.c: Likewise.
* elf/tst-tls4.c: Likewise.
* elf/tst-tls5.c: Likewise.
* elf/tst-tls6.c: Likewise.
* elf/tst-tls7.c: Likewise.
* elf/tst-tls8.c: Likewise.
* elf/tst-tls9.c: Likewise.
* elf/tst-tlsmod1.c: Likewise.
* elf/tst-tlsmod13.c: Likewise.
* elf/tst-tlsmod13a.c: Likewise.
* elf/tst-tlsmod14a.c: Likewise.
* elf/tst-tlsmod2.c: Likewise.
* elf/tst-tlsmod3.c: Likewise.
* elf/tst-tlsmod4.c: Likewise.
* elf/tst-tlsmod5.c: Likewise.
* elf/tst-tlsmod6.c: Likewise.
* include/errno.h: Likewise.
* include/link.h: Likewise.
* include/tls.h: Likewise.
* locale/global-locale.c: Likewise.
* locale/localeinfo.h: Likewise.
* malloc/arena.c: Likewise.
* malloc/hooks.c: Likewise.
* malloc/malloc.c: Likewise.
* resolv/Versions: Likewise.
* sysdeps/alpha/dl-machine.h: Likewise.
* sysdeps/alpha/libc-tls.c: Likewise.
* sysdeps/generic/ldsodefs.h: Likewise.
* sysdeps/generic/tls.h: Likewise.
* sysdeps/i386/dl-machine.h: Likewise.
* sysdeps/ia64/dl-machine.h: Likewise.
* sysdeps/ia64/libc-tls.c: Likewise.
* sysdeps/mach/hurd/fork.c: Likewise.
* sysdeps/mach/hurd/i386/tls.h: Likewise.
* sysdeps/powerpc/powerpc32/dl-machine.c: Likwise.
* sysdeps/powerpc/powerpc32/dl-machine.h: Likewise.
* sysdeps/powerpc/powerpc64/dl-machine.h: Likewise.
* sysdeps/s390/libc-tls.c: Likewise.
* sysdeps/s390/s390-32/dl-machine.h: Likewise.
* sysdeps/s390/s390-64/dl-machine.h: Likewise.
* sysdeps/sh/dl-machine.h: Likewise.
* sysdeps/sparc/sparc32/dl-machine.h: Likewise.
* sysdeps/sparc/sparc64/dl-machine.h: Likewise.
* sysdeps/x86_64/dl-machine.h: Likewise.
[BZ #3426 ]
* stdlib/stdlib.h: Adjust comment for canonicalize_file_name to
reality.
2006-10-27 Jakub Jelinek <jakub@redhat.com>
* elf/dl-lookup.c (_dl_debug_bindings): Remove unused symbol_scope
argument.
(_dl_lookup_symbol_x): Adjust caller.
* sysdeps/generic/ldsodefs.h (struct link_namespaces): Remove
_ns_global_scope.
* elf/rtld.c (dl_main): Don't initialize _ns_global_scope.
* elf/dl-libc.c: Revert l_scope name changes.
* elf/dl-load.c: Likewise.
* elf/dl-object.c: Likewise.
* elf/rtld.c: Likewise.
* elf/dl-close.c (_dl_close): Likewise.
* elf/dl-open.c (dl_open_worker): Likewise. If not SINGLE_THREAD_P,
always use __rtld_mrlock_{change,done}. Always free old scope list
here if not l_scope_mem.
* elf/dl-runtime.c (_dl_fixup, _dl_profile_fixup): Revert l_scope name
change. Never free scope list here. Just __rtld_mrlock_lock before
the lookup and __rtld_mrlock_unlock it after the lookup.
* elf/dl-sym.c: Likewise.
* include/link.h (struct r_scoperec): Remove.
(struct link_map): Replace l_scoperec with l_scope, l_scoperec_mem
with l_scope_mem and l_scoperec_lock with l_scope_lock.
2006-10-25 Ulrich Drepper <drepper@redhat.com>
* sysdeps/gnu/netinet/tcp.h: Define TCP_CONGESTION.
2006-10-18 Ulrich Drepper <drepper@redhat.com>
* configure.in: Disable building profile libraries by default.
2006-10-18 Ulrich Drepper <drepper@redhat.com>
* elf/dl-lookup.c (_dl_lookup_symbol_x): Add warning to
_dl_lookup_symbol_x code.
2006-10-17 Jakub Jelinek <jakub@redhat.com>
* elf/dl-runtime.c: Include sysdep-cancel.h.
(_dl_fixup, _dl_profile_fixup): Use __rtld_mrlock_* and
scoperec->nusers only if !SINGLE_THREAD_P. Use atomic_*
instead of catomic_* macros.
* elf/dl-sym.c: Include sysdep-cancel.h.
(do_sym): Use __rtld_mrlock_* and scoperec->nusers only
if !SINGLE_THREAD_P. Use atomic_* instead of catomic_* macros.
* elf/dl-close.c: Include sysdep-cancel.h.
(_dl_close): Use __rtld_mrlock_* and scoperec->nusers only
if !SINGLE_THREAD_P. Use atomic_* instead of catomic_* macros.
* elf/dl-open.c: Include sysdep-cancel.h.
(dl_open_worker): Use __rtld_mrlock_* and scoperec->nusers only
if !SINGLE_THREAD_P. Use atomic_* instead of catomic_* macros.
2006-10-17 Jakub Jelinek <jakub@redhat.com>
[BZ #3313 ]
* malloc/malloc.c (malloc_consolidate): Set maxfb to address of last
fastbin rather than end of fastbin array.
2006-10-18 Ulrich Drepper <drepper@redhat.com>
* sysdeps/i386/i486/bits/atomic.h (catomic_decrement): Use correct
body macro.
* sysdeps/x86_64/bits/atomic.h
(__arch_c_compare_and_exchange_val_64_acq): Add missing casts.
(catomic_decrement): Use correct body macro.
2006-10-17 Jakub Jelinek <jakub@redhat.com>
* include/atomic.h: Add a unique prefix to all local variables
in macros.
* csu/tst-atomic.c (do_test): Test also catomic_* macros.
2006-10-14 Ulrich Drepper <drepper@redhat.com>
* resolv/arpa/nameser.h: Document that ns_t_a6 is deprecated.
[BZ #3313 ]
* malloc/malloc.c (malloc_consolidate): Don't use get_fast_max to
determine highest fast bin to consolidate, always look into all of
them.
(do_check_malloc_state): Only require for empty bins for large
sizes in main arena.
* libio/stdio.h: Add more __wur attributes.
2006-11-12 Andreas Jaeger <aj@suse.de>
[BZ #2510 ]
* manual/search.texi (Hash Search Function): Clarify.
(Array Search Function): Clarify.
2006-11-12 Joseph Myers <joseph@codesourcery.com>
[BZ #2830 ]
* math/atest-exp.c (main): Cast hex value to mp_limb_t before
shifting.
* math/atest-exp2.c (read_mpn_hex): Likewise.
* math/atest-sincos.c (main): Likewise.
* sysdeps/unix/sysv/linux/syscalls.list: Add epoll_pwait.
* sysdeps/unix/sysv/linux/sys/epoll.h: Declare epoll_pwait.
* sysdeps/unix/sysv/linux/Versions (libc): Add epoll_pwait for
version GLIBC_2.6.
* Versions.def: Add GLIBC_2.6 for libc.
* sysdeps/i386/i486/bits/atomic.h: Add catomic_* support.
2006-10-11 Jakub Jelinek <jakub@redhat.com>
* malloc/malloc.c (_int_malloc): Remove unused any_larger variable.
* nis/nis_defaults.c (__nis_default_access): Don't call getenv twice.
* nis/nis_subr.c (nis_getnames): Use __secure_getenv instead of getenv.
* sysdeps/generic/unsecvars.h: Add NIS_PATH.
2006-10-11 Ulrich Drepper <drepper@redhat.com>
* include/atomic.c: Define catomic_* operations.
* sysdeps/x86_64/bits/atomic.h: Likewise. Fix a few minor problems.
* stdlib/cxa_finalize.c: Use catomic_* operations instead of atomic_*.
* malloc/memusage.c: Likewise.
* gmon/mcount.c: Likewise.
* elf/dl-close.c: Likewise.
* elf/dl-open.c: Likewise.
* elf/dl-profile.c: Likewise.
* elf/dl-sym.c: Likewise.
* elf/dl-runtime.c: Likewise.
* elf/dl-fptr.c: Likewise.
* resolv/res_libc.c: Likewise.
2006-10-10 Roland McGrath <roland@frob.com>
* sysdeps/mach/hurd/utimes.c: Use a union to avoid an improper cast.
* sysdeps/mach/hurd/futimes.c: Likewise.
* sysdeps/mach/hurd/lutimes.c: Likewise.
2006-10-09 Ulrich Drepper <drepper@redhat.com>
Jakub Jelinek <jakub@redhat.com>
Implement reference counting of scope records.
* elf/dl-close.c (_dl_close): Remove all scopes from removed objects
from the list in objects which remain. Always allocate new scope
record.
* elf/dl-open.c (dl_open_worker): When growing array for scopes,
don't resize, allocate a new one.
* elf/dl-runtime.c: Update reference counters before using a scope
array.
* elf/dl-sym.c: Likewise.
* elf/dl-libc.c: Adjust for l_scope name change.
* elf/dl-load.c: Likewise.
* elf/dl-object.c: Likewise.
* elf/rtld.c: Likewise.
* include/link.h: Include <rtld-lowlevel.h>. Define struct
r_scoperec. Replace r_scope with pointer to r_scoperec structure.
Add l_scoperec_lock.
* sysdeps/generic/ldsodefs.h: Include <rtld-lowlevel.h>.
* sysdeps/generic/rtld-lowlevel.h: New file.
* include/atomic.h: Rename atomic_and to atomic_and_val and
atomic_or to atomic_or_val. Define new macros atomic_and and
atomic_or which do not return values.
* sysdeps/x86_64/bits/atomic.h: Define atomic_and and atomic_or.
Various cleanups.
* sysdeps/i386/i486/bits/atomic.h: Likewise.
* po/sv.po: Update from translation team.
2006-10-07 Ulrich Drepper <drepper@redhat.com>
* Versions.def: Add GLIBC_2.6 to libpthread.
* include/shlib-compat.h (SHLIB_COMPAT): Expand parameters before use.
(versioned_symbol): Likewise.
(compat_symbol): Likewise.
* po/tr.po: Update from translation team.
* nis/Banner: Removed. It's been integral part forever and the
author info is incomplete anyway.
* libio/Banner: Likewise.
2006-10-06 Ulrich Drepper <drepper@redhat.com>
* version.h (VERSION): Bump to 2.5.90 for new development tree.
2007-01-11 21:51:07 +00:00
Jakub Jelinek
32c075e1f0
.
2007-07-31 13:33:18 +00:00
Ulrich Drepper
1e88bd0f1b
[BZ #2337 ]
...
2006-12-13 Ulrich Drepper <drepper@redhat.com>
[BZ #2337 ]
* libio/Makefile (tests): Add tst-setvbuf1.
* libio/tst-setvbuf1.c: New file.
2006-12-08 Jakub Jelinek <jakub@redhat.com>
[BZ #2337 ]
* libio/genops.c (__uflow): Fix a typo.
* libio/wfiledoalloc.c (_IO_wfile_doallocate): Don't stat
nor set _IO_LINE_BUF bit here. Size the wide buffer based on
the narrow buffer size.
2006-11-24 Jakub Jelinek <jakub@redhat.com>
[BZ #2337 ]
* libio/libio.h (_IO_FLAGS2_USER_WBUF): Define.
* libio/wgenops.c (_IO_wsetb, _IO_wdefault_finish): Test and set
_IO_FLAGS2_USER_WBUF bit in _flags2 instead of _IO_USER_BUF bit
in _flags.
* libio/wstrops.c (_IO_wstr_overflow, enlarge_userbuf,
_IO_wstr_finish): Likewise.
* libio/wmemstream.c (open_wmemstream): Likewise.
* libio/fileops.c (_IO_new_file_close_it): Call _IO_set[bgp]
even for wide streams.
2006-12-13 23:17:54 +00:00
Ulrich Drepper
a815c3ab35
(_IO_new_file_fopen): If ,ccs= is given, also set vtable to the wide vtable.
2006-01-19 00:38:35 +00:00
Ulrich Drepper
cae6ebb2c9
[BZ #1078 ]
...
2005-09-27 Ulrich Drepper <drepper@redhat.com>
[BZ #1078 ]
* libio/fileops.c (_IO_new_file_xsputn): Determine amount of
available space in non-line-buffered buffer correctly.
* libio/oldfileops.c (_IO_old_file_xsputn): Likewise.
* stdio-common/Makefile (tests): Add tst-fwrite.
* stdio-common/tst-fwrite.c: New file.
2005-09-27 19:40:49 +00:00
Ulrich Drepper
34c5e4a1f1
* stdio-common/Makefile (tests): Add tst-put-error.
...
* stdio-common/tst-put-error.c: New file.
* libio/fileops.c (_IO_new_file_xsputn): If overflow fails and no more
data would have to be written signal error.
* libio/oldfileops.c (_IO_old_file_xsputn): Likewise.
* libio/fileops.c (_IO_new_file_overflow): Use NULL not 0.
2005-09-04 20:10:35 +00:00
Ulrich Drepper
a334319f65
(CFLAGS-tst-align.c): Add -mpreferred-stack-boundary=4.
2004-12-22 20:10:10 +00:00
Jakub Jelinek
0ecb606cb6
2.5-18.1
2007-07-12 18:26:36 +00:00
Ulrich Drepper
c03c66ddb5
Update.
...
2004-12-06 Ulrich Drepper <drepper@redhat.com>
* libio/fileops.c (_IO_new_file_seekoff): Fix optimization of in-buffer
seek. Remove dead code.
2004-12-02 Jakub Jelinek <jakub@redhat.com>
* libio/Makefile (tests): Add bug-ungetc4.
* libio/bug-ungetc4.c: New test.
2004-12-06 22:39:13 +00:00
Ulrich Drepper
eca29725d1
(_IO_new_file_seekoff): If mode is 0 and fp->_offset == _IO_pos_BAD, just call _IO_SYSSEEK (fp, 0, dir) and if successful set fp->_offset.
2004-11-09 07:04:08 +00:00
