AuroraMiddleware/glibc
1
0
Fork 0
mirror of https://sourceware.org/git/glibc.git synced 2024-11-21 20:40:05 +00:00
Code Issues Packages Projects Releases Wiki Activity
30,984 Commits 334 Branches 1,646 Tags 276 MiB
b76e065991
Commit Graph

1888 Commits

Author SHA1 Message Date
Florian Weimer
b76e065991 resolv: Deprecate the "inet6" option and RES_USE_INET6 [BZ #19582] 2016-12-31 18:55:14 +01:00
Joseph Myers
423c2b9d08 Add fromfp functions. 
TS 18661-1 defines fromfp functions (fromfp, fromfpx, ufromfp,
ufromfpx, and float and long double variants) to convert from
floating-point to an integer type with any signedness and any given
width up to that of intmax_t, in any of the five IEEE rounding modes
(the usual four for binary floating point, plus rounding to nearest
with ties rounding away from zero), with control of whether in-range
non-integer values should result in the "inexact" exception being
raised.  This patch implements these functions for glibc.

These implementations are (apart from raising exceptions) pure integer
implementations; it's entirely possible optimized versions could be
devised for some architectures.  A common math/fromfp.h header
provides various common helper code that can readily be shared between
the implementations for different types.  For each type, the bulk of
the implementation is also shared between the four functions, with
wrappers that define UNSIGNED and INEXACT macros appropriately before
including the main implementation.

As the functions return intmax_t and uintmax_t without math.h being
allowed to expose those typedef names, they are declared using
__intmax_t and __uintmax_t as obtained from <bits/types.h>.

The FP_INT_* rounding direction macros are defined as ascending
integers in the order the names are listed in the TS; I see no
significant value in allowing architectures to vary the values of
them.

The libm-test machinery is duly adapted to handle unsigned int
arguments, and intmax_t and uintmax_t results.  Because each test
input is generally tested for four functions, five rounding modes and
several different widths, the libm-test.inc additions are very large.
Thus, the diffs in the body of this message exclude the libm-test.inc
changes, with the full patch being attached gzipped.  The bulk of the
new tests were generated (expanded from a test input plus rounding
results and information about where it lies in the relevant interval
between integers, to libm-test tests for all relevant combinations of
function, rounding direction and width) by a script that's included in
the patch as math/gen-fromfp-tests.py (input data
math/gen-fromfp-tests-inputs); as an ad hoc script that's not really
expected to be rerun, it's not very polished, but it's at least
plausibly useful for adding any further tests for these functions in
future.  I may split the libm-test tests up by function in future (so
both libm-test.inc and auto-libm-test-out are split into separate
files, and the tests for each function are also built and run
separately), but not for 2.25.

For no obvious reason, adding tgmath tests for the new functions
resulted in -Wuninitialized errors from test-tgmath.c about the
variable i being used uninitialized.  Those errors were correct - the
variable is read by the frexp version in test-tgmath.c (where real
frexp would write through that pointer instead of reading it) - but I
don't know why this patch would result in the pre-existing issue being
newly detected.  The patch initializes the variable to avoid those
errors.

With these changes, glibc 2.25 should have all the library features
from TS 18661-1 other than the functions that round result to narrower
type (and constant rounding directions, but I'm considering those
mainly a compiler feature not a library one).

Tested for x86_64, x86, mips64 and powerpc.

	* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(fromfp): New declaration.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfpx): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfp): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfpx): Likewise.
	* math/tgmath.h (__TGMATH_TERNARY_FIRST_REAL_RET_ONLY): New macro.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfp): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfp): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfpx): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfpx): Likewise.
	* math/math.h: Include <bits/types.h>.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_INT_UPWARD): New enum
	constant and macro.
	(FP_INT_DOWNWARD): Likewise.
	(FP_INT_TOWARDZERO): Likewise.
	(FP_INT_TONEARESTFROMZERO): Likewise.
	(FP_INT_TONEAREST): Likewise.
	* math/Versions (fromfp): New libm symbol at version GLIBC_2.25.
	(fromfpf): Likewise.
	(fromfpl): Likewise.
	(ufromfp): Likewise.
	(ufromfpf): Likewise.
	(ufromfpl): Likewise.
	(fromfpx): Likewise.
	(fromfpxf): Likewise.
	(fromfpxl): Likewise.
	(ufromfpx): Likewise.
	(ufromfpxf): Likewise.
	(ufromfpxl): Likewise.
	* math/Makefile (libm-calls): Add s_fromfpF, s_ufromfpF,
	s_fromfpxF and s_ufromfpxF.
	* math/gen-fromfp-tests.py: New file.
	* math/gen-fromfp-tests-inputs: Likewise.
	* math/libm-test.inc: Include <stdint.h>
	(check_intmax_t): New function.
	(check_uintmax_t): Likewise.
	(struct test_fiu_M_data): New type.
	(struct test_fiu_U_data): Likewise.
	(RUN_TEST_fiu_M): New macro.
	(RUN_TEST_LOOP_fiu_M): Likewise.
	(RUN_TEST_fiu_U): Likewise.
	(RUN_TEST_LOOP_fiu_U): Likewise.
	(fromfp_test_data): New array.
	(fromfp_test): New function.
	(fromfpx_test_data): New array.
	(fromfpx_test): New function.
	(ufromfp_test_data): New array.
	(ufromfp_test): New function.
	(ufromfpx_test_data): New array.
	(ufromfpx_test): New function.
	(main): Call fromfp_test, fromfpx_test, ufromfp_test and
	ufromfpx_test.
	* math/gen-libm-test.pl (parse_args): Handle u, M and U descriptor
	characters.
	* math/test-tgmath-ret.c: Include <stdint.h>.
	(rm): New variable.
	(width): Likewise.
	(CHECK_RET_CONST_TYPE): Take extra arguments and pass them to
	called function.
	(CHECK_RET_CONST_FLOAT): Take extra arguments and pass them to
	CHECK_RET_CONST_TYPE.
	(CHECK_RET_CONST_DOUBLE): Likewise.
	(CHECK_RET_CONST_LDOUBLE): Likewise.
	(CHECK_RET_CONST): Take extra arguments and pass them to calls
	macros.
	(fromfp): New CHECK_RET_CONST call.
	(ufromfp): Likewise.
	(fromfpx): Likewise.
	(ufromfpx): Likewise.
	(do_test): Call check_return_fromfp, check_return_ufromfp,
	check_return_fromfpx and check_return_ufromfpx.
	* math/test-tgmath.c: Include <stdint.h>
	(NCALLS): Increase to 138.
	(F(compile_test)): Initialize i.  Call fromfp functions.
	(F(fromfp)): New function.
	(F(fromfpx)): Likewise.
	(F(ufromfp)): Likewise.
	(F(ufromfpx)): Likewise.
	* manual/arith.texi (Rounding Functions): Document FP_INT_UPWARD,
	FP_INT_DOWNWARD, FP_INT_TOWARDZERO, FP_INT_TONEARESTFROMZERO,
	FP_INT_TONEAREST, fromfp, fromfpf, fromfpl, ufromfp, ufromfpf,
	ufromfpl, fromfpx, fromfpxf, fromfpxl, ufromfpx, ufromfpxf and
	ufromfpxl.
	* manual/libm-err-tab.pl (@all_functions): Add fromfp, fromfpx,
	ufromfp and ufromfpx.
	* math/fromfp.h: New file.
	* sysdeps/ieee754/dbl-64/s_fromfp.c: Likewise.
	* sysdeps/ieee754/dbl-64/s_fromfp_main.c: Likewise.
	* sysdeps/ieee754/dbl-64/s_fromfpx.c: Likewise.
	* sysdeps/ieee754/dbl-64/s_ufromfp.c: Likewise.
	* sysdeps/ieee754/dbl-64/s_ufromfpx.c: Likewise.
	* sysdeps/ieee754/flt-32/s_fromfpf.c: Likewise.
	* sysdeps/ieee754/flt-32/s_fromfpf_main.c: Likewise.
	* sysdeps/ieee754/flt-32/s_fromfpxf.c: Likewise.
	* sysdeps/ieee754/flt-32/s_ufromfpf.c: Likewise.
	* sysdeps/ieee754/flt-32/s_ufromfpxf.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_fromfpl.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_fromfpl_main.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_fromfpxl.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_ufromfpl.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_ufromfpxl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_fromfpl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_fromfpl_main.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_fromfpxl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_ufromfpl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_ufromfpxl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_fromfpl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_fromfpl_main.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_fromfpxl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_ufromfpl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_ufromfpxl.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fromfp,
	ufromfp, fromfpx and ufromfpx.
	(CFLAGS-nldbl-fromfp.c): New variable.
	(CFLAGS-nldbl-fromfpx.c): Likewise.
	(CFLAGS-nldbl-ufromfp.c): Likewise.
	(CFLAGS-nldbl-ufromfpx.c): Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-compat.h: Include <stdint.h>.
	* sysdeps/ieee754/ldbl-opt/nldbl-fromfp.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-fromfpx.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-ufromfp.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-ufromfpx.c: Likewise.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-12-31 00:40:59 +00:00
Nick Alcock
cecbc7967f Enable -fstack-protector=* when requested by configure [BZ #7065] 2016-12-26 10:11:06 +01:00
Joseph Myers
a5ac5676be Update NEWS feature test macro description of TS 18661-1 support. 
The NEWS entry for the feature test macro
__STDC_WANT_IEC_60559_BFP_EXT__ describes the state of support for
that TS as "most features from that TS are not supported by the GNU C
Library".  This patch updates it to say "not all features from that TS
are supported by the GNU C Library".

(The functions not yet supported are the fromfp functions - I'm
working on them, but they may not be done before the freeze - and the
functions round result to narrower type - which definitely won't be
started for 2.25, since they require significant infrastructure work.
That's 30 functions, which is less than half the number of functions
in the TS, so saying "most" now seems inaccurate.)
 2016-12-22 00:04:58 +00:00
Joseph Myers
41c67149b9 Add roundeven, roundevenf, roundevenl. 
TS 18661-1 defines roundeven functions that round a floating-point
number to the nearest integer, in that floating-point type, with ties
rounding to even (whereas the round functions round ties away from
zero).  As with other such functions, they raise no exceptions apart
from "invalid" for signaling NaNs.  There was a previous user request
for this functionality in glibc in
<https://sourceware.org/ml/libc-help/2015-02/msg00005.html>.

This patch implements these functions for glibc.  The implementations
use integer bit-manipulation (or roundeven on the high and low parts,
in the IBM long double case).  It's possible that there may be faster
approaches on some architectures (in particular, on AArch64 the frintn
instruction should do exactly what's required); I'll leave it to
architecture maintainers or others interested to implement such
architecture-specific versions if desired.  (Where architectures have
instructions to round to nearest integer in the current rounding mode,
implementations saving and restoring the rounding mode - and dealing
with exceptions if those instructions generate "inexact" - are also
possible, though their performance depends on the cost of manipulating
exceptions / rounding mode state.)

Tested for x86_64, x86, mips64 and powerpc.

	* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(roundeven): New declaration.
	* math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (roundeven): New
	macro.
	* math/Versions (roundeven): New libm symbol at version
	GLIBC_2.25.
	(roundevenf): Likewise.
	(roundevenl): Likewise.
	* math/Makefile (libm-calls): Add s_roundevenF.
	* math/libm-test.inc (roundeven_test_data): New array.
	(roundeven_test): New function.
	(main): Call roundeven_test.
	* math/test-tgmath.c (NCALLS): Increase to 134.
	(F(compile_test)): Call roundeven.
	(F(roundeven)): New function.
	* manual/arith.texi (Rounding Functions): Document roundeven,
	roundevenf and roundevenl.
	* manual/libm-err-tab.pl (@all_functions): Add roundeven.
	* include/math.h (roundeven): Use libm_hidden_proto.
	* sysdeps/ieee754/dbl-64/s_roundeven.c: New file.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_roundeven.c: Likewise.
	* sysdeps/ieee754/flt-32/s_roundevenf.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_roundevenl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_roundevenl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_roundevenl.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
	roundeven.
	(CFLAGS-nldbl-roundeven.c): New variable.
	* sysdeps/ieee754/ldbl-opt/nldbl-roundeven.c: New file.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-12-21 01:48:27 +00:00
Joseph Myers
525f803984 Add fmaxmag, fminmag functions. 
TS 18661-1 defines fmaxmag and fminmag functions that return the
argument with maximum / minimum magnitude (acting like fmax / fmin if
the arguments have the same magnitude or either argument is a NaN).
These correspond to the IEEE 754-2008 operations maxNumMag and
minNumMag.  This patch implements these functions for glibc.  They are
implemented with type-generic templates.  Tests are based on those for
fmax and fmin.

Tested for x86_64, x86, mips64 and powerpc.

	* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(fmaxmag): New declaration.
	(fminmag): Likewise.
	* math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (fmaxmag): New
	macro.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (fminmag): Likewise.
	* math/Versions (fmaxmag): New libm symbol at version GLIBC_2.25.
	(fmaxmagf): Likewise.
	(fmaxmagl): Likewise.
	(fminmag): Likewise.
	(fminmagf): Likewise.
	(fminmagl): Likewise.
	* math/Makefile (gen-libm-calls): Add s_fmaxmagF and s_fminmagF.
	* math/s_fmaxmag_template.c: New file.
	* math/s_fminmag_template.c: Likewise.
	* math/libm-test.inc (fmaxmag_test_data): New array.
	(fmaxmag_test): New function.
	(fminmag_test_data): New array.
	(fminmag_test): New function.
	(main): Call fmaxmag_test and fminmag_test.
	* math/test-tgmath.c (NCALLS): Increase to 132.
	(F(compile_test)): Call fmaxmag and fminmag.
	(F(fminmag)): New function.
	(F(fmaxmag)): Likewise.
	* manual/arith.texi (Misc FP Arithmetic): Document fminmag,
	fminmagf, fminmagl, fmaxmag, fmaxmagf and fmaxmagl.
	* manual/libm-err-tab.pl (@all_functions): Add fmaxmag and
	fminmag.
	* sysdeps/ieee754/ldbl-opt/nldbl-fmaxmag.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-fminmag.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/s_fmaxmagl.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/s_fminmagl.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fmaxmag
	and fminmag.
	(CFLAGS-nldbl-fmaxmag.c): New variable.
	(CFLAGS-nldbl-fminmag.c): Likewise.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-12-20 00:46:53 +00:00
Zack Weinberg
ea1bd74def New string function explicit_bzero (from OpenBSD). 
explicit_bzero(s, n) is the same as memset(s, 0, n), except that the
compiler is not allowed to delete a call to explicit_bzero even if the
memory pointed to by 's' is dead after the call.  Right now, this effect
is achieved externally by having explicit_bzero be a function whose
semantics are unknown to the compiler, and internally, with a no-op
asm statement that clobbers memory.  This does mean that small
explicit_bzero operations cannot be expanded inline as small memset
operations can, but on the other hand, small memset operations do get
deleted by the compiler.  Hopefully full compiler support for
explicit_bzero will happen relatively soon.

There are two new tests: test-explicit_bzero.c verifies the
visible semantics in the same way as the existing test-bzero.c,
and tst-xbzero-opt.c verifies the not-being-optimized-out property.
The latter is conceptually based on a test written by Matthew Dempsky
for the OpenBSD regression suite.

The crypt() implementation has an immediate use for this new feature.
We avoid having to add a GLIBC_PRIVATE alias for explicit_bzero
by running all of libcrypt's calls through the fortified variant,
__explicit_bzero_chk, which is in the impl namespace anyway.  Currently
I'm not aware of anything in libc proper that needs this, but the
glue is all in place if it does become necessary.  The legacy DES
implementation wasn't bothering to clear its buffers, so I added that,
mostly for consistency's sake.

	* string/explicit_bzero.c: New routine.
	* string/test-explicit_bzero.c, string/tst-xbzero-opt.c: New tests.
	* string/Makefile (routines, strop-tests, tests): Add them.
	* string/test-memset.c: Add ifdeffage for testing explicit_bzero.
	* string/string.h [__USE_MISC]: Declare explicit_bzero.

	* debug/explicit_bzero_chk.c: New routine.
	* debug/Makefile (routines): Add it.
	* debug/tst-chk1.c: Test fortification of explicit_bzero.
	* string/bits/string3.h: Fortify explicit_bzero.

	* manual/string.texi: Document explicit_bzero.
	* NEWS: Mention addition of explicit_bzero.

	* crypt/crypt-entry.c (__crypt_r): Clear key-dependent intermediate
	data before returning, using explicit_bzero.
	* crypt/md5-crypt.c (__md5_crypt_r): Likewise.
	* crypt/sha256-crypt.c (__sha256_crypt_r): Likewise.
	* crypt/sha512-crypt.c (__sha512_crypt_r): Likewise.

	* include/string.h: Redirect internal uses of explicit_bzero
	to __explicit_bzero_chk[_internal].
	* string/Versions [GLIBC_2.25]: Add explicit_bzero.
	* debug/Versions [GLIBC_2.25]: Add __explicit_bzero_chk.
	* sysdeps/arm/nacl/libc.abilist
	* sysdeps/unix/sysv/linux/aarch64/libc.abilist
	* sysdeps/unix/sysv/linux/alpha/libc.abilist
	* sysdeps/unix/sysv/linux/arm/libc.abilist
	* sysdeps/unix/sysv/linux/hppa/libc.abilist
	* sysdeps/unix/sysv/linux/i386/libc.abilist
	* sysdeps/unix/sysv/linux/ia64/libc.abilist
	* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist
	* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist
	* sysdeps/unix/sysv/linux/microblaze/libc.abilist
	* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist
	* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist
	* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist
	* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist
	* sysdeps/unix/sysv/linux/nios2/libc.abilist
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist
	* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist
	* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist
	* sysdeps/unix/sysv/linux/sh/libc.abilist
	* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist
	* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist
	* sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist
	* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist
	* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist:
	Add entries for explicit_bzero and __explicit_bzero_chk.
 2016-12-16 16:21:54 -05:00
Joseph Myers
c0b4353654 Define FE_SNANS_ALWAYS_SIGNAL. 
TS 18661-1 defines a macro FE_SNANS_ALWAYS_SIGNAL in <fenv.h>, to
indicate that the recommended practice regarding sNaNs (that
operations always produce a qNaN output with "invalid" exception, even
in the fmax / fmin / hypot / pow cases where a qNaN input would not
result in qNaN output) is followed.

Now that those functions with C99 special cases for NaNs have been
fixed not to apply those special cases to sNaN, only to qNaN, glibc
follows that recommended practice.  This patch makes it define the
corresponding macro.

Since compiler optimizations may affect whether sNaNs behave as
expected and the macro relates to both language and library features,
it is only defined if __SUPPORT_SNAN__ is defined (which GCC defines
for -fsignaling-nans).  It is also not defined if FE_INVALID is
undefined, since the recommended practice specifically refers to
raising the "invalid" exception, so it seems inappropriate to define
the macro for soft-float cases without support for exceptions.
(Further refinement would be possible in cases where bits/fenv.h is
shared by configurations both with and without exceptions support.)

Tested for x86_64 and x86, and also did compile-only testing for nios2
to cover the no-exceptions case.

	* math/fenv.h
	[__GLIBC_USE (IEC_60559_BFP_EXT) && FE_INVALID && __SUPPORT_SNAN__]
	(FE_SNANS_ALWAYS_SIGNAL): New macro.
	* math/test-fe-snans-always-signal.c: New file.
	* math/Makefile (tests): Add test-fe-snans-always-signal.
	(CFLAGS-test-fe-snans-always-signal.c): New variable.
	* manual/arith.texi (Infinity and NaN): Document
	FE_SNANS_ALWAYS_SIGNAL.
 2016-12-16 18:03:25 +00:00
Florian Weimer
92dcaa3e2f Add getentropy, getrandom, <sys/random.h> [BZ #17252] 2016-12-12 17:28:04 +01:00
Zack Weinberg
c03073774f Make _REENTRANT and _THREAD_SAFE aliases for _POSIX_C_SOURCE=199506L. 
For many years, the only effect of these macros has been to make
unistd.h declare getlogin_r.  _POSIX_C_SOURCE >= 199506L also causes
this function to be declared.  However, people who don't carefully
read all the headers might be confused into thinking they need to
define _REENTRANT for any threaded code (as was indeed the case a long
time ago).

Therefore, remove __USE_REENTRANT, and make _REENTRANT and _THREAD_SAFE
into synonyms for _POSIX_C_SOURCE=199506L.  This will only affect
programs that don't select a higher conformance level some other way.
For instance, -std=c89 -D_REENTRANT will see a change in visible
declarations, but -std=c99 -D_POSIX_C_SOURCE=200809L -D_REENTRANT won't,
and -D_REENTRANT all by itself also won't, because _DEFAULT_SOURCE
implies _POSIX_C_SOURCE > 199506.

	* include/features.h: Remove __USE_REENTRANT.  Treat _REENTRANT
	and _THREAD_SAFE the same as _POSIX_C_SOURCE=199506L, if a higher
	POSIX conformance level has not been selected by other macros.
	* NEWS, manual/creature.texi: Document this change.

	* posix/unistd.h, posix/bits/unistd.h: Don't check __USE_REENTRANT.
	* include/libc-symbols.h: Don't define _REENTRANT.
	* scripts/check-installed-headers.sh: Don't undefine _REENTRANT.
 2016-12-08 15:45:33 -05:00
Martin Galvan
23b5cae1af Add pretty printers for the NPTL lock types 
This patch adds pretty printers for the following NPTL types:

- pthread_mutex_t
- pthread_mutexattr_t
- pthread_cond_t
- pthread_condattr_t
- pthread_rwlock_t
- pthread_rwlockattr_t

To load the pretty printers into your gdb session, do the following:

python
import sys
sys.path.insert(0, '/path/to/glibc/build/nptl/pretty-printers')
end

source /path/to/glibc/source/pretty-printers/nptl-printers.py

You can check which printers are registered and enabled by issuing the
'info pretty-printer' gdb command. Printers should trigger automatically when
trying to print a variable of one of the types mentioned above.

The printers are architecture-independent, and were tested on an AMD64 running
Ubuntu 14.04 and an x86 VM running Fedora 24.

In order to work, the printers need to know the values of various flags that
are scattered throughout pthread.h and pthreadP.h as enums and #defines. Since
replicating these constants in the printers file itself would create a
maintenance burden, I wrote a script called gen-py-const.awk that Makerules uses
to extract the constants. This script is pretty much the same as gen-as-const.awk,
except it doesn't cast the constant values to 'long' and is thorougly documented.
The constants need only to be enumerated in a .pysym file, which is then referenced
by a Make variable called gen-py-const-headers.

As for the install directory, I discussed this with Mike Frysinger and Siddhesh
Poyarekar, and we agreed that it can be handled in a separate patch, and shouldn't
block merging of this one.

In addition, I've written a series of test cases for the pretty printers.
Each lock type (mutex, condvar and rwlock) has two test programs, one for itself
and other for its related 'attributes' object. Each test program in turn has a
PExpect-based Python script that drives gdb and compares its output to the
expected printer's. The tests run on the glibc host, which is assumed to have
both gdb and PExpect; if either is absent the tests will fail with code 77
(UNSUPPORTED). For cross-testing you should use cross-test-ssh.sh as test-wrapper.
I've tested the printers on both native builds and a cross build using a Beaglebone
Black running Debian, with the build system's filesystem shared with the board
through NFS.

Finally, I've written a README that explains all this and more.

	* INSTALL: Regenerated.
	* Makeconfig: Add comments and whitespace to make the control flow
	clearer.
	(+link-printers-tests, +link-pie-printers-tests, CFLAGS-printers-tests,
	installed-rtld-LDFLAGS, built-rtld-LDFLAGS, link-libc-rpath,
	link-libc-tests-after-rpath-link, link-libc-printers-tests): New.
	(rtld-LDFLAGS, rtld-tests-LDFLAGS, link-libc-tests-rpath-link,
	link-libc-tests): Use the new variables as required.
	* Makerules ($(py-const)): New rule.
	generated: Add $(py-const).
	* README.pretty-printers: New file.
	* Rules (tests-printers-programs, tests-printers-out, py-env): New.
	(others): Depend on $(py-const).
	(tests): Depend on $(tests-printers-programs) or $(tests-printers-out),
	as required.  Pass $(tests-printers) to merge-test-results.sh.
	* manual/install.texi: Add requirements for testing the pretty printers.
	* nptl/Makefile (gen-py-const-headers, pretty-printers, tests-printers,
	CFLAGS-test-mutexattr-printers.c CFLAGS-test-mutex-printers.c,
	CFLAGS-test-condattr-printers.c, CFLAGS-test-cond-printers.c,
	CFLAGS-test-rwlockattr-printers.c CFLAGS-test-rwlock-printers.c,
	tests-printers-libs): Define.
	* nptl/nptl-printers.py: New file.
	* nptl/nptl_lock_constants.pysym: Likewise.
	* nptl/test-cond-printers.c: Likewise.
	* nptl/test-cond-printers.py: Likewise.
	* nptl/test-condattr-printers.c: Likewise.
	* nptl/test-condattr-printers.py: Likewise.
	* nptl/test-mutex-printers.c: Likewise.
	* nptl/test-mutex-printers.py: Likewise.
	* nptl/test-mutexattr-printers.c: Likewise.
	* nptl/test-mutexattr-printers.py: Likewise.
	* nptl/test-rwlock-printers.c: Likewise.
	* nptl/test-rwlock-printers.py: Likewise.
	* nptl/test-rwlockattr-printers.c: Likewise.
	* nptl/test-rwlockattr-printers.py: Likewise.
	* scripts/gen-py-const.awk: Likewise.
	* scripts/test_printers_common.py: Likewise.
	* scripts/test_printers_exceptions.py: Likewise.
 2016-12-08 18:59:02 +05:30
Joseph Myers
55a38f8236 Add llogb, llogbf, llogbl. 
TS 18661-1 defines llogb functions that are like ilogb except that
they return long int instead of int.  Corresponding FP_LLOGB* macros
are defined, whose values are required to have the obvious
correspondence to those of the FP_ILOGB* macros.

This patch implements these functions and macros for glibc.  llogb
uses the type-generic infrastructure, with an implementation similar
to the wrapper for ilogb but with additional conversion from FP_ILOGB*
to FP_LLOGB*; this approach avoids needing to modify or duplicate any
of the architecture-specific ilogb implementations.  Tests are also
based on those for ilogb.

Ideally the llogb functions would alias the ilogb ones when long is
32-bit, but such aliasing requires the associated header declarations
of the different-type alias to be hidden, typically by defining macros
before including the header (see e.g. how
sysdeps/ieee754/dbl-64/wordsize-64/s_llround.c defines lround to
__hidden_lround before including <math.h>).  The infrastructure for
type-generic function implementations does not support defining such
macros at present (since C code can't define a macro whose name is
determined by other macros).  So this patch leaves them as separate
functions (similar to e.g. scalbln and scalbn being separate in such a
case as well), but with the remapping of FP_ILOGB* to FP_LLOGB*
conditioned out in the case where it would be the identity map.

Tested for x86_64, x86, mips64 and powerpc.

	* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (llogb):
	New declaration.
	* math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (llogb): New
	macro.
	* math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (__FP_LONG_MAX):
	New macro.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_LLOGB0): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_LLOGBNAN): Likewise.
	* math/Versions (llogb): New libm symbol at version GLIBC_2.25.
	(llogbf): Likewise.
	(llogbl): Likewise.
	* math/Makefile (gen-libm-calls): Add w_llogbF.
	(tests): Add test-fp-llogb-constants.
	* math/w_llogb_template.c: New file.  Based on
	math/w_ilogb_template.c.
	* math/libm-test.inc (llogb_test_data): New array.
	(llogb_test): New function.
	(main): Call llogb_test.
	* math/test-fp-llogb-constants.c: New file.  Based on
	math/test-fp-ilogb-constants.c.
	* math/test-tgmath-ret.c (llogb): New CHECK_RET_CONST call.
	(do_test): Call check_return_llogb.
	* math/test-tgmath.c (NCALLS): Increase to 126.
	(F(compile_test)): Call llogb.
	(F(llogb)): New function.
	* manual/math.texi (Exponents and Logarithms): Document llogb,
	llogbf, llogbl, FP_LLOGB0 and FP_LLOGBNAN.
	* manual/libm-err-tab.pl (@all_functions): Add llogb.
	* sysdeps/ieee754/ldbl-opt/nldbl-llogb.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_llogbl.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add llogb.
	(CFLAGS-nldbl-llogb.c): New variable.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-12-02 01:42:49 +00:00
Florian Weimer
705a79f825 libio: Limit buffer size to 8192 bytes [BZ #4099] 
This avoids overly large buffers with network file systems which report
very large block sizes.
 2016-11-30 14:59:27 +01:00
Joseph Myers
457663a7cd Add setpayloadsig, setpayloadsigf, setpayloadsigl. 
TS 18661-1 defines functions for manipulating the payloads of NaNs.
This patch implements the setpayloadsig functions for glibc; these are
like the setpayload functions, but produce a signaling NaN instead of
a quiet NaN.

The substance of the implementation was included with the setpayload
implementation, so the new files here just need to wrap the main files
with different defines to build the new functions.

Because the functions store a signaling NaN via a pointer and the
libm-test macros choose a suitable initial value for the variable in
such a case by comparing with the expected value, the relevant macro
needs to clear exceptions after FE_INVALID may have been raised by
that comparison.

Tested for x86_64, x86, mips64 and powerpc.

	* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(setpayloadsig): New declaration.
	* math/Versions (setpayloadsig): New libm symbol at version
	GLIBC_2.25.
	(setpayloadsigf): Likewise.
	(setpayloadsigl): Likewise.
	* math/Makefile (libm-calls): Add s_setpayloadsigF.
	* math/libm-test.inc (RUN_TEST_Ff_b1): Call feclearexcept
	(FE_ALL_EXCEPT) after initializing EXTRA_VAR.
	(setpayloadsig_test_data): New array.
	(setpayloadsig_test): New function.
	(main): Call setpayloadsig_test.
	* manual/arith.texi (FP Bit Twiddling): Document setpayloadsig,
	setpayloadsigf and setpayloadsigl.
	* manual/libm-err-tab.pl: Update comment on interfaces without
	ulps tabulated.
	* sysdeps/ieee754/dbl-64/s_setpayloadsig.c: New file.
	* sysdeps/ieee754/flt-32/s_setpayloadsigf.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_setpayloadsigl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_setpayloadsigl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_setpayloadsigl.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-setpayloadsig.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
	setpayloadsig.
	(CFLAGS-nldbl-setpayloadsig.c): New variable.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-11-24 23:56:48 +00:00
Joseph Myers
f3b904d963 More NEWS entries / fixes for float_t / double_t changes. 
Document changes for x86_64 -mfpmath=sse and -mfpmath=sse+387.  Don't
put these NEWS entries in the middle of TS 18661-1 entries.
 2016-11-23 21:30:04 +00:00
Joseph Myers
b0216d3e4d Fix default float_t definition (bug 20855). 
The default (top-level) version of bits/mathdef.h defines float_t to
double.  It is used on ColdFire, MicroBlaze, Nios II and SH3, all of
which define FLT_EVAL_METHOD to 0, so float_t should be float (and C11
requires a certain correspondence between these typedefs and
FLT_EVAL_METHOD values).

I proposed fixing this default in
<https://sourceware.org/ml/libc-alpha/2015-01/msg00499.html>, with no
objections from architecture maintainers, and this patch makes that
fix.  As noted in the NEWS entry added, this might affect the ABIs of
non-glibc libraries (ImageMagick has been mentioned in gcc-patches
discussion of the S/390 case - which is unaffected by this patch), but
as noted in my previous message, affected libraries would have
problems with -mfpmath=sse anyway on 32-bit x86.

A (compilation) testcase is added to verify the required
correspondence of typedefs to FLT_EVAL_METHOD values.  This test is
built with -fexcess-precision=standard to avoid any issues with GCC 7
on S/390 providing a more accurate FLT_EVAL_METHOD definition in the
default (no excess precision) mode.  (This will also be usable to test
a fix for the recently reported bug about these typedefs on x86_64
-mfpmath=387, as architecture-specific tests can be added that

It is entirely possible that the fixed default makes some
architecture-specific versions of bits/mathdef.h semantically
equivalent to the default version and so no longer required.  I don't
intend to investigate that separately from the refactoring I proposed
in <https://sourceware.org/ml/libc-alpha/2016-11/msg00745.html>, which
will create as few header variants as possible for each group of
definitions.

Tested (compilation only) with build-many-glibcs.py.

	[BZ #20855]
	* bits/mathdef.h (float_t): Define to float.
	* math/test-flt-eval-method.c: New file.
	* math/Makefile (tests): Add test-flt-eval-method.
	(CFLAGS-test-flt-eval-method.c): New variable.
 2016-11-23 00:28:30 +00:00
Joseph Myers
eb3c12c784 Add setpayload, setpayloadf, setpayloadl. 
TS 18661-1 defines functions for manipulating the payloads of NaNs.
This patch implements the setpayload functions for glibc; these set a
number (pointed to by a function argument) to a quiet NaN with the
given payload, or to +0 if the given payload is not valid.  The
implementations are structured to allow the substance of the
implementation to be shared with the setpayloadsig functions when
those are added.

The semantics in the TS are not entirely clear in the case where the
payload passed to the function is zero (see discussion on the WG14
reflector last month).  This patch implements what seems the most
sensible interpretation, that -0 is never valid to give as the
payload, but +0 is valid in the case where the kind of NaN being
generated has its high mantissa bit set so payload 0 is actually
possible in such a NaN.

Tested for x86_64, x86, mips64 and powerpc.

	* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(setpayload): New declaration.
	* math/Versions (setpayload): New libm symbol at version
	GLIBC_2.25.
	(setpayloadf): Likewise.
	(setpayloadl): Likewise.
	* math/Makefile (libm-calls): Add s_setpayloadF.
	* math/libm-test.inc (struct test_Ffp_b1_data): Rename to struct
	test_Ff_b1_data.
	(RUN_TEST_Ff_b1): New macro.
	(RUN_TEST_LOOP_Ff_b1): Likewise.
	(canonicalize_test_data): Update type.
	(setpayload_test_data): New array.
	(setpayload_test): New function.
	(main): Call setpayload_test.
	* manual/arith.texi (FP Bit Twiddling): Document setpayload,
	setpayloadf and setpayloadl.
	* manual/libm-err-tab.pl: Update comment on interfaces without
	ulps tabulated.
	* sysdeps/ieee754/dbl-64/s_setpayload.c: New file.
	* sysdeps/ieee754/dbl-64/s_setpayload_main.c: Likewise.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_setpayload_main.c:
	Likewise.
	* sysdeps/ieee754/flt-32/s_setpayloadf.c: Likewise.
	* sysdeps/ieee754/flt-32/s_setpayloadf_main.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_setpayloadl.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_setpayloadl_main.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_setpayloadl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_setpayloadl_main.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_setpayloadl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_setpayloadl_main.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-setpayload.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
	setpayload.
	(CFLAGS-nldbl-setpayload.c): New variable.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-11-19 00:16:28 +00:00
Joseph Myers
f82a4bdb73 Add SNAN, SNANF, SNANL macros. 
TS 18661-1 defines SNAN macros for signaling NaN values, suitable for
use in static initializers.  This patch adds them to glibc's <math.h>
(provided you are building with GCC 3.3 or later; no attempt is made
to provide any kind of nonconforming fallback for older compilers
without the __builtin_nans functions).

Tested for x86_64 and x86.

	* math/math.h
	[__GLIBC_USE (IEC_60559_BFP_EXT) && __GNUC_PREREQ (3, 3)] (SNANF):
	New macro.
	[__GLIBC_USE (IEC_60559_BFP_EXT) && __GNUC_PREREQ (3, 3)] (SNAN):
	Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT) && __GNUC_PREREQ (3, 3)] (SNANL):
	Likewise.
	* manual/arith.texi (Infinity and NaN): Document SNANF, SNAN and
	SNANL.
	* math/test-double.h (snan_value_MACRO): New macro.
	* math/test-float.h (snan_value_MACRO): Likewise.
	* math/test-ldouble.h (snan_value_MACRO): Likewise.
	* math/libm-test.inc (issignaling_test_data): Add tests of
	snan_value_MACRO.
 2016-10-28 21:16:58 +00:00
Joseph Myers
eaf5ad0bc4 Add canonicalize, canonicalizef, canonicalizel. 
TS 18661-1 defines canonicalize functions to produce a canonical
version of a floating-point representation.  This patch implements
these functions for glibc.

As with the iscanonical macro, these functions are oriented to the
decimal floating-point case, where some values have both canonical and
noncanonical representations.  However, the functions have a return
value that says whether they succeeded in storing a canonical result;
thus, they can fail for the case of an invalid representation (while
still not making any particular choice from among multiple equally
canonical valid representations of the same value).  Since no
floating-point formats in glibc actually have noncanonical valid
representations, a type-generic implementation of these functions can
be used that expects iscanonical to return 0 only for invalid
representations.  Now that iscanonical is used within libm.so,
libm_hidden_proto / libm_hidden_def are added for __iscanonicall.

The definition of these functions is intended to correspond to a
convertFormat operation to the same floating-point format.  Thus, they
convert signaling NaNs to quiet NaNs, raising the "invalid" exception.
Such a conversion "should" produce "the canonical version of that
signaling NaN made quiet".

libm-test.inc is made to check NaN payloads for the output of these
functions, a new feature (at some point manipulation functions such as
fabs and copysign should have tests added that verify payload
preservation for them).  As however some architectures may not follow
the recommended practice of preserving NaN payloads when converting a
signaling NaN to quiet, a new math-tests.h macro
SNAN_TESTS_PRESERVE_PAYLOAD is added, and defined to 0 for non-NAN2008
MIPS; any other architectures seeing test failures for lack of payload
preservation in this case should also define this macro to 0.  (If any
cases arise where the sign isn't preserved either, those should have a
similar macro added.)

The ldbl-96 and ldbl-128ibm tests of iscanonical are renamed and
adapted to test canonicalizel as well on the same representations.

Tested for x86_64, x86, mips64 and powerpc.

	* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(canonicalize): New declaration.
	* math/Versions (canonicalize): New libm symbol at version
	GLIBC_2.25.
	(canonicalizef): Likewise.
	(canonicalizel): Likewise.
	* math/Makefile (gen-libm-calls): Add s_canonicalizeF.
	* math/s_canonicalize_template.c: New file.
	* math/libm-test.inc: Update comment on functions tested and
	testing of NaN payloads.
	(TEST_NAN_PAYLOAD): New macro.
	(NO_TEST_INLINE): Update value.
	(XFAIL_TEST): Likewise.
	(ERRNO_UNCHANGED): Likewise.
	(ERRNO_EDOM): Likewise.
	(ERRNO_ERANGE): Likewise.
	(IGNORE_RESULT): Likewise.
	(NON_FINITE): Likewise.
	(TEST_SNAN): Likewise.
	(NO_TEST_MATHVEC): Likewise.
	(TEST_NAN_PAYLOAD_CANONICALIZE): New macro.
	(check_float_internal): Check NaN payloads if TEST_NAN_PAYLOAD.
	(struct test_Ffp_b1_data): New type.
	(RUN_TEST_Ffp_b1): New macro.
	(RUN_TEST_LOOP_Ffp_b1): Likewise.
	(canonicalize_test_data): New array.
	(canonicalize_test): New function.
	(main): Call canonicalize_test.
	* manual/arith.texi (FP Bit Twiddling): Document canonicalize,
	canonicalizef and canonicalizel.
	* manual/libm-err-tab.pl: Update comment on interfaces without
	ulps tabulated.
	* sysdeps/ieee754/ldbl-opt/nldbl-canonicalize.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_canonicalizel.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
	canonicalize.
	(CFLAGS-nldbl-canonicalize.c): New variable.
	* sysdeps/ieee754/ldbl-128ibm/test-iscanonical-ldbl-128ibm.c: Move
	to ...
	* sysdeps/ieee754/ldbl-128ibm/test-canonical-ldbl-128ibm.c:
	... here.
	(do_test): Also test canonicalizel.
	* sysdeps/ieee754/ldbl-128ibm/Makefile (tests): Change
	test-iscanonical-ldbl-128ibm to test-canonical-ldbl-128ibm.
	* sysdeps/ieee754/ldbl-128ibm/include/bits/iscanonical.h: New
	file.
	* sysdeps/ieee754/ldbl-128ibm/s_iscanonicall.c (__iscanonicall):
	Use libm_hidden_def.
	* sysdeps/ieee754/ldbl-96/test-iscanonical-ldbl-96.c: Move to ...
	* sysdeps/ieee754/ldbl-96/test-canonical-ldbl-96.c: ... here.
	(do_test): Also test canonicalizel.
	* sysdeps/ieee754/ldbl-96/Makefile (tests): Change
	test-iscanonical-ldbl-96 to test-canonical-ldbl-96.
	* sysdeps/ieee754/ldbl-96/include/bits/iscanonical.h: New file.
	* sysdeps/ieee754/ldbl-96/s_iscanonicall.c (__iscanonicall): Use
	libm_hidden_def.
	* sysdeps/generic/math-tests.h (SNAN_TESTS_PRESERVE_PAYLOAD): New
	macro.
	* sysdeps/mips/math-tests.h [__mips_hard_float && !__mips_nan2008]
	(SNAN_TESTS_PRESERVE_PAYLOAD): Likewise.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-10-26 23:14:31 +00:00
Florian Weimer
e863cce57b malloc: Remove malloc_get_state, malloc_set_state [BZ #19473] 
After the removal of __malloc_initialize_hook, newly compiled
Emacs binaries are no longer able to use these interfaces.
malloc_get_state is only used during the Emacs build process,
so we provide a stub implementation only.  Existing Emacs binaries
will not call this stub function, but still reference the symbol.

The rewritten tst-mallocstate test constructs a dumped heap
which should approximates what existing Emacs binaries pass
to glibc malloc.
 2016-10-26 13:28:28 +02:00
Gabriel F. T. Gomes
6962682ffe Add strfromd, strfromf, and strfroml functions 
ISO/IEC TS 18661-1 adds several functions in the strfrom family to stdlib.
This patch adds strfromd, strfromf, and strfroml.  This is being done in
preparation for the new floating-point type, float128.  The added functions
convert a floating-point value into a string, with configurable format.
 2016-10-25 17:03:54 -02:00
Joseph Myers
f8e8b8ed9f Add getpayload, getpayloadf, getpayloadl. 
TS 18661-1 defines functions for manipulating the payloads of NaNs.
This patch implements the getpayload functions for glibc; these
extract the NaN payload (from an argument passed as a pointer, for
which corresponding libm-test support is added) and return it in the
same floating-point type.  The return value of these functions is
unspecified for non-NaN arguments; the patch does the simplest thing
to implement, which is that the functions do not check whether the
argument is a NaN and just treat the relevant bits of the
representation as a payload regardless.  A conversion from integer to
floating-point is used to produce the required return value, except in
the ldbl-128 case; as 128-bit integers are not supported for all
configurations using ldbl-128, the code constructs the required
floating-point representation of the return value directly instead.

Tested for x86_64, x86, mips64 and powerpc.

	* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(getpayload): New declaration.
	* math/Versions (getpayload): New libm symbol at version
	GLIBC_2.25.
	(getpayloadf): Likewise.
	(getpayloadl): Likewise.
	* math/Makefile (libm-calls): Add s_getpayloadF.
	* math/libm-test.inc: Include <nan-high-order-bit.h>.
	(struct test_f_f_data): Add comment.
	(RUN_TEST_fp_f): New macro.
	(RUN_TEST_LOOP_fp_f): Likewise.
	(getpayload_test_data): New array.
	(getpayload_test): New function.
	(main): Call getpayload_test.
	* math/gen-libm-test.pl (parse_args): Handle 'p' in argument
	descriptor.
	* manual/arith.texi (FP Bit Twiddling): Document getpayload,
	getpayloadf and getpayloadl.
	* manual/libm-err-tab.pl: Update comment on interfaces without
	ulps tabulated.
	* sysdeps/ieee754/dbl-64/s_getpayload.c: New file.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_getpayload.c: Likewise.
	* sysdeps/ieee754/flt-32/s_getpayloadf.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_getpayloadl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_getpayloadl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_getpayloadl.c: Likewise.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-10-19 01:49:09 +00:00
Joseph Myers
cc6a8d7457 Add totalordermag, totalordermagf, totalordermagl. 
In addition to the totalorder functions, TS 18661-1 defines
totalordermag functions, which do the same comparison but on the
absolute values of the arguments.  This patch implements these
functions for glibc, including the type-generic macro in <tgmath.h>.
In general the implementations are similar to but simpler than those
for the totalorder functions.

Tested for x86_64, x86, mips64 and powerpc.

	* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(totalordermag): New declaration.
	* math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalordermag):
	New macro.
	* math/Versions (totalordermag): New libm symbol at version
	GLIBC_2.25.
	(totalordermagf): Likewise.
	(totalordermagl): Likewise.
	* math/Makefile (libm-calls): Add s_totalordermagF.
	* math/libm-test.inc (totalordermag_test_data): New array.
	(totalordermag_test): New function.
	(main): Call totalordermag_test.
	* math/test-tgmath.c (NCALLS): Increase to 125.
	(F(compile_test)): Call totalordermag.
	(F(totalordermag)): New function.
	* manual/arith.texi (FP Comparison Functions): Document
	totalordermag, totalordermagf and totalordermagl.
	* manual/libm-err-tab.pl: Update comment on interfaces without
	ulps tabulated.
	* sysdeps/ieee754/dbl-64/s_totalordermag.c: New file.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_totalordermag.c: Likewise.
	* sysdeps/ieee754/flt-32/s_totalordermagf.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_totalordermagl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_totalordermagl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_totalordermagl.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-totalordermag.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
	totalordermag.
	(CFLAGS-nldbl-totalordermag.c): New variable.
	* sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c
	(do_test): Also test totalordermagl.
	* sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c (do_test):
	Likewise.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-10-15 00:36:48 +00:00
Joseph Myers
5e9d98a3d9 Add totalorder, totalorderf, totalorderl. 
TS 18661-1 defines totalorder functions implementing the totalOrder
comparison operation from IEEE 754-2008.  This patch implements these
functions for glibc, including the type-generic macro in <tgmath.h>.
(The totalordermag functions will be added in a separate patch.)

The description of the totalOrder operation is complicated.  However,
for IEEE interchange binary formats and the preferred quiet NaN
convention, what that complicated description means is that you
interpret the representation as a sign-magnitude integer (with -0
coming before +0) and do a <= comparison on that interpretation.  For
finite values and infinities the ordering of the sign-magnitude
integers is just the same as the ordering of floating-point values, so
this extends that to all representations.  (Different representations
of the same floating-point value - which includes same quantum in the
decimal case - must still be considered equal by this operation, but
that issue doesn't arise for IEEE interchange binary formats.)  So the
complications are:

* When MIPS quiet NaN conventions are in use, the representation of
  NaNs needs adjusting before making such an integer comparison.  This
  patch does this adjustment only when both arguments are NaNs, as
  there's no need for it if only one is a NaN, and as long as both are
  NaNs you can just flip the relevant bits without any problems from
  this turning a NaN into an infinity.

* For the m68k version of ldbl-96, where the high mantissa bit is
  "don't care" for infinities and NaNs, representations where it
  differs must compare the same.  Note: although the testcase for this
  compiles, I have not actually tested on m68k.

* For ldbl-128ibm, the low part must be ignored when the high part is
  NaN, and low parts of +0 and -0 must be considered the same whatever
  the high part.

The new tests in libm-test.inc are the first tests there specifying
particular payloads for input NaNs.  Separate tests are also added for
the ldbl-96 and ldbl-128ibm special cases where there are different
representations of the same value that must compare equal (which can't
be covered in libm-test.inc as that only specifies values, not
representations).

Tested for x86_64, x86, mips64 and powerpc.

	* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(totalorder): New declaration.
	* math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder):
	New macro.
	* math/Versions (totalorder): New libm symbol at version
	GLIBC_2.25.
	(totalorderf): Likewise.
	(totalorderl): Likewise.
	* math/Makefile (libm-calls): Add s_totalorderF.
	* math/gen-libm-test.pl (parse_args): Escape quotes in test name
	string.
	* math/libm-test.inc (PAYLOAD_DIG): New macro.
	(qnan_value_pl): Likewise.
	(snan_value_pl): Likewise.
	(qnan_value): Define using qnan_value_pl.
	(snan_value): Define using snan_value_pl.
	(struct test_ff_i_data): Add comment about which tests use this
	structure.
	(RUN_TEST_ff_b): New macro.
	(RUN_TEST_LOOP_ff_b): Likewise.
	(totalorder_test_data): New array.
	(totalorder_test): New function.
	(main): Call totalorder_test.
	* math/test-tgmath.c (NCALLS): Increase to 122.
	(F(compile_test)): Call totalorder.
	(F(totalorder)): New function.
	* manual/arith.texi (FP Comparison Functions): Document
	totalorder, totalorderf and totalorderl.
	* manual/libm-err-tab.pl: Update comment on interfaces without
	ulps tabulated.
	* sysdeps/ieee754/dbl-64/s_totalorder.c: New file.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c: Likewise.
	* sysdeps/ieee754/flt-32/s_totalorderf.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_totalorderl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_totalorderl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_totalorderl.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-totalorder.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
	totalorder.
	(CFLAGS-nldbl-totalorder.c): New variable.
	* sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c: New
	file.
	* sysdeps/ieee754/ldbl-128ibm/Makefile [$(subdir) = math] (tests):
	Add test-totalorderl-ldbl-128ibm.
	* sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c: New file.
	* sysdeps/ieee754/ldbl-96/Makefile [$(subdir) = math] (tests): Add
	test-totalorderl-ldbl-96.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-10-12 01:20:30 +00:00
Florian Weimer
5140d036f9 resolv: Remove RES_USEBSTRING and its implementation [BZ #20629] 
In ns_name_ntop, the NS_CMPRSFLGS check is no longer needed because
labellen (called earlier) already rejects everything which is not
a plain label (compression references and extended label types).
 2016-10-07 17:41:59 +02:00
Florian Weimer
7ec47a85d8 resolv: Remove RES_NOIP6DOTINT and its implementation 2016-10-07 17:41:59 +02:00
Florian Weimer
bfbd1de159 resolv: Deprecate unimplemented flags 
RES_AAONLY, RES_PRIMARY, RES_NOCHECKNAME, RES_KEEPTSIG result
in compile-time warnings.  Some of these flags are still used in
applications.
 2016-10-07 17:41:45 +02:00
Stefan Liebler
022dfdce00 Add configure check to test if gcc supports attribute ifunc. 
This patch adds a configure check to test if gcc supports attribute ifunc.
The support can either be enabled in <gcc-src>/gcc/config.gcc for one
architecture in general by setting default_gnu_indirect_function variable to yes
or by configuring gcc with --enable-gnu-indirect-function.

The next patch rewrites libc_ifunc macro to use gcc attribute ifunc instead
of inline assembly to generate the IFUNC symbols due to false debuginfo.

If gcc does not support attribute ifunc, the old approach for generating
ifunc'ed symbols is used. Then the debug-information is false. Thus it is
recommended to use a gcc with indirect function support (See notes in INSTALL).
After this patch-series these inline assemblies for ifunc-handling are not
scattered in multiple files but are used only indirect via ifunc-macros
and can simply removed in libc-symbols.h in future.

If glibc is configured with --enable-multi-arch and gcc does not support
attribute ifunc, a configure warning is dumped!

ChangeLog:

	* config.h.in (HAVE_GCC_IFUNC): New undef.
	* configure.ac: Add check if gcc supports attribute ifunc feature.
	* configure: Regenerated.
	* manual/install.texi: Add recommendation for gcc with
	indirect-function support.
	* INSTALL: Regenerated.
 2016-10-07 10:02:59 +02:00
Joseph Myers
1e7c8fcca5 Add iseqsig. 
TS 18661-1 adds an iseqsig type-generic comparison macro to <math.h>.
This macro is like the == operator except that unordered operands
result in the "invalid" exception and errno being set to EDOM.

This patch implements this macro for glibc.  Given the need to set
errno, this is implemented with out-of-line functions __iseqsigf,
__iseqsig and __iseqsigl (of which the last only exists at all if long
double is ABI-distinct from double, so no function aliases or compat
support are needed).  The present patch ignores excess precision
issues; I intend to deal with those in a followup patch.  (Like
comparison operators, type-generic comparison macros should *not*
convert operands to their semantic types but should preserve excess
range and precision, meaning that for some argument types and values
of FLT_EVAL_METHOD, an underlying function should be called for a
wider type than that of the arguments.)

The underlying functions are implemented with the type-generic
template machinery.  Comparing x <= y && x >= y is sufficient in ISO C
to achieve an equality comparison with "invalid" raised for unordered
operands (and the results of those two comparisons can also be used to
tell whether errno needs to be set).  However, some architectures have
GCC bugs meaning that unordered comparison instructions are used
instead of ordered ones.  Thus, a mechanism is provided for
architectures to use an explicit call to feraiseexcept to raise
exceptions if required.  If your architecture has such a bug you
should add a fix-fp-int-compare-invalid.h header for it, with a
comment pointing to the relevant GCC bug report; if such a GCC bug is
fixed, that header's contents should have a __GNUC_PREREQ conditional
added so that the workaround can eventually be removed for that
architecture.

Tested for x86_64, x86, mips64, arm and powerpc.

	* math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (iseqsig): New
	macro.
	* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(__iseqsig): New declaration.
	* math/s_iseqsig_template.c: New file.
	* math/Versions (__iseqsigf): New libm symbol at version
	GLIBC_2.25.
	(__iseqsig): Likewise.
	(__iseqsigl): Likewise.
	* math/libm-test.inc (iseqsig_test_data): New array.
	(iseqsig_test): New function.
	(main): Call iseqsig_test.
	* math/Makefile (gen-libm-calls): Add s_iseqsigF.
	* manual/arith.texi (FP Comparison Functions): Document iseqsig.
	* manual/libm-err-tab.pl: Update comment on interfaces without
	ulps tabulated.
	* sysdeps/generic/fix-fp-int-compare-invalid.h: New file.
	* sysdeps/powerpc/fpu/fix-fp-int-compare-invalid.h: Likewise.
	* sysdeps/x86/fpu/fix-fp-int-compare-invalid.h: Likewise.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-10-06 22:19:38 +00:00
Joseph Myers
29cb929332 Add iscanonical. 
TS 18661-1 adds an iscanonical classification macro to <math.h>.

The motivation for this is decimal floating-point, where some values
have both canonical and noncanonical encodings.  For IEEE binary
interchange formats, all encodings are canonical.  For x86/m68k
ldbl-96, and for ldbl-128ibm, there are encodings that do not
represent any valid value of the type; although formally iscanonical
does not need to handle trap representations (and so could just always
return 1), it seems useful, and in line with the description in the TS
of "representations that are extraneous to the floating-point model"
as being non-canonical (as well as "redundant representations of some
or all of its values"), for it to detect those representations and
return 0 for them.

This patch adds iscanonical to glibc.  It goes in a header
<bits/iscanonical.h>, included under appropriate conditions in
<math.h>.  The default header version just evaluates the argument
(converted to its semantic type, though current GCC will probably
discard that conversion and any exceptions resulting from it) and
returns 1.  ldbl-96 and ldbl-128ibm then have versions of the header
that call a function __iscanonicall for long double (the sizeof-based
tests will of course need updating for float128 support, like other
such type-generic macro implementations).  The ldbl-96 version of
__iscanonicall has appropriate conditionals to reflect the differences
in the m68k version of that format (where the high mantissa bit may be
either 0 or 1 when the exponent is 0 or 0x7fff).  Corresponding tests
for those formats are added as well.  Other architectures do not have
any new functions added because just returning 1 is correct for all
their floating-point formats.

Tested for x86_64, x86, mips64 (to test the default macro version) and
powerpc.

	* math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Include
	<bits/iscanonical.h>.
	* bits/iscanonical.h: New file.
	* math/s_iscanonicall.c: Likewise.
	* math/Versions (__iscanonicall): New libm symbol at version
	GLIBC_2.25.
	* math/libm-test.inc (iscanonical_test_data): New array.
	(iscanonical_test): New function.
	(main): Call iscanonical_test.
	* math/Makefile (headers): Add bits/iscanonical.h.
	(type-ldouble-routines): Add s_iscanonicall.
	* manual/arith.texi (Floating Point Classes): Document
	iscanonical.
	* manual/libm-err-tab.pl: Update comment on interfaces without
	ulps tabulated.
	* sysdeps/ieee754/ldbl-128ibm/bits/iscanonical.h: New file.
	* sysdeps/ieee754/ldbl-128ibm/s_iscanonicall.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/test-iscanonical-ldbl-128ibm.c:
	Likewise.
	* sysdeps/ieee754/ldbl-128ibm/Makefile (tests): Add
	test-iscanonical-ldbl-128ibm.
	* sysdeps/ieee754/ldbl-96/bits/iscanonical.h: New file.
	* sysdeps/ieee754/ldbl-96/s_iscanonicall.c: Likewise.
	* sysdeps/ieee754/ldbl-96/test-iscanonical-ldbl-96.c: Likewise.
	* sysdeps/ieee754/ldbl-96/Makefile: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-09-30 00:27:50 +00:00
Joseph Myers
bb8081f57f Add iszero. 
TS 18661-1 adds an iszero classification macro to <math.h>.  This
patch implements it for glibc.  There are no new underlying functions
in libm because the implementation uses fpclassify when sNaN support
is required and a direct comparison otherwise; any optimizations for
this macro should be done through adding __builtin_iszero in GCC and
using it in the header for suitable GCC versions, not through adding
other optimized inline or out-of-line versions to glibc.

Tested for x86_64 and x86.

	* math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (iszero): New
	macro.
	* math/libm-test.inc (iszero_test_data): New array.
	(iszero_test): New function.
	(main): Call iszero_test.
	* manual/arith.texi (Floating Point Classes): Document iszero.
	* manual/libm-err-tab.pl: Update comment on interfaces without
	ulps tabulated.
 2016-09-23 21:54:21 +00:00
Joseph Myers
d942e95cd7 Add issubnormal. 
TS 18661-1 adds an issubnormal classification macro to <math.h>.  This
patch implements it for glibc.  There are no new underlying functions
in libm because the implementation uses fpclassify; any optimizations
for this macro should be done through adding __builtin_subnormal in
GCC and using it in the header for suitable GCC versions, not through
adding other optimized inline or out-of-line versions to glibc.

The intended structure of the NEWS entry for <math.h> features from TS
18661-1 is like:

* New <math.h> features are added from TS 18661-1:2014:

  - Nearest integer functions: roundeven, roundevenf, roundevenl.

  - Comparison macros: iseqsig.

  - Classification macros: iscanonical, issubnormal, iszero.

(that is, following the grouping of interfaces in TS 18661-1:2014,
with any group where any interfaces are new in glibc 2.25 being listed
like that).

Tested for x86_64 and x86.

	* math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (issubnormal): New
	macro.
	* math/libm-test.inc (issubnormal_test_data): New array.
	(issubnormal_test): New function.
	* manual/arith.texi (Floating Point Classes): Document
	issubnormal.
	* manual/libm-err-tab.pl: Update comment on interfaces without
	ulps tabulated.
 2016-09-21 20:52:02 +00:00
Joseph Myers
5b17fd0da6 Add <stdint.h> integer width macros. 
TS 18661-1 defines macros for the width of integer types, intended for
use with the fromfp functions to convert from floating-point types to
integer types of any width, in any rounding mode and with control over
whether "inexact" is raised.  Such macros are, of course, more
generally useful than just with those functions.

Those macros are added to <limits.h> and <stdint.h>.  Having
previously added the <limits.h> macros, this patch adds the <stdint.h>
ones.  I've also added these macros to GCC's headers for GCC 7, but
for glibc systems, the definitions in GCC's <stdint.h> will only be
used with -ffreestanding.

Tested for x86_64 and x86.

	* sysdeps/generic/stdint.h: Define
	__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
	<bits/libc-header-start.h> instead of including <features.h>.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (INT8_WIDTH): New macro.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT8_WIDTH): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (INT16_WIDTH): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT16_WIDTH): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (INT32_WIDTH): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT32_WIDTH): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (INT64_WIDTH): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT64_WIDTH): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_LEAST8_WIDTH): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_LEAST8_WIDTH): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_LEAST16_WIDTH): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_LEAST16_WIDTH): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_LEAST32_WIDTH): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_LEAST32_WIDTH): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_LEAST64_WIDTH): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_LEAST64_WIDTH): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_FAST8_WIDTH): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_FAST8_WIDTH): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_FAST16_WIDTH): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_FAST16_WIDTH): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_FAST32_WIDTH): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_FAST32_WIDTH): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_FAST64_WIDTH): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_FAST64_WIDTH): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (INTPTR_WIDTH): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINTPTR_WIDTH): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (INTMAX_WIDTH): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINTMAX_WIDTH): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (PTRDIFF_WIDTH): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (SIG_ATOMIC_WIDTH): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (SIZE_WIDTH): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (WCHAR_WIDTH): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (WINT_WIDTH): Likewise.
	* manual/arith.texi (Integers): Document these macros for types
	specified by width properties.
	* manual/lang.texi (Width of Type): Document these macros for
	other standard typedefs.
	* stdlib/tst-width-stdint.c: New file.
	* stdlib/Makefile (tests): Add tst-width-stdint.
 2016-09-21 17:06:36 +00:00
Florian Weimer
6815a33d53 resolv: Remove unsupported hook functions from the API [BZ #20016] 2016-09-21 16:30:27 +02:00
Florian Weimer
be728303a6 <arpa/nameser.h>: Remove RR type classification macros [BZ #20592] 
The macros are no longer up-to-date, and the classification is not
useful.  In this particular case, removal without prior deprecation
seems the right approach.
 2016-09-21 16:27:14 +02:00
Florian Weimer
3a2a1d2cc2 Remove obsolete DNSSEC support [BZ #20591] 
The removed function declaration have never been implemented in libresolv.
 2016-09-21 16:08:32 +02:00
Joseph Myers
a292f45acd Add <limits.h> integer width macros. 
TS 18661-1 defines macros for the width of integer types, intended for
use with the fromfp functions to convert from floating-point types to
integer types of any width, in any rounding mode and with control over
whether "inexact" is raised.  Such macros are, of course, more
generally useful than just with those functions.

Those macros are added to <limits.h> and <stdint.h>.  This patch adds
the <limits.h> macros to glibc's header, with the <stdint.h> ones
intended to be added in a separate patch (which would add to the NEWS
entry created by this patch).  I've also added these macros to GCC's
headers for GCC 7, but definitions in glibc's <limits.h> are still
useful for older GCC, for non-GNU compilers and for when it's
_GNU_SOURCE rather than __STDC_WANT_IEC_60559_BFP_EXT__ that implies
the macros should be defined since the GCC header only considers
__STDC_WANT_IEC_60559_BFP_EXT__ (and for glibc systems, the
definitions in GCC's <stdint.h> will only be used with
-ffreestanding).

Tested for x86_64 and x86.

	* include/limits.h: Define
	__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
	<bits/libc-header-start.h> instead of including <features.h>.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (CHAR_WIDTH): New macro.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (SCHAR_WIDTH): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (UCHAR_WIDTH): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (SHRT_WIDTH): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (USHRT_WIDTH): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_WIDTH): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_WIDTH): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (LONG_WIDTH): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (ULONG_WIDTH): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (LLONG_WIDTH): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (ULLONG_WIDTH): Likewise.
	* manual/lang.texi (Width of Type): Document these macros.
	* stdlib/tst-width.c: New file.
	* stdlib/Makefile (tests): Add tst-width.
 2016-09-19 12:25:36 +00:00
Joseph Myers
ec94343f59 Add femode_t functions. 
TS 18661-1 defines a type femode_t to represent the set of dynamic
floating-point control modes (such as the rounding mode and trap
enablement modes), and functions fegetmode and fesetmode to manipulate
those modes (without affecting other state such as the raised
exception flags) and a corresponding macro FE_DFL_MODE.

This patch series implements those interfaces for glibc.  This first
patch adds the architecture-independent pieces, the x86 and x86_64
implementations, and the <bits/fenv.h> and ABI baseline updates for
all architectures so glibc keeps building and passing the ABI tests on
all architectures.  Subsequent patches add the fegetmode and fesetmode
implementations for other architectures.

femode_t is generally an integer type - the same type as fenv_t, or as
the single element of fenv_t where fenv_t is a structure containing a
single integer (or the single relevant element, where it has elements
for both status and control registers) - except where architecture
properties or consistency with the fenv_t implementation indicate
otherwise.  FE_DFL_MODE follows FE_DFL_ENV in whether it's a magic
pointer value (-1 cast to const femode_t *), a value that can be
distinguished from valid pointers by its high bits but otherwise
contains a representation of the desired register contents, or a
pointer to a constant variable (the powerpc case; __fe_dfl_mode is
added as an exported constant object, an alias to __fe_dfl_env).

Note that where architectures (that share a register between control
and status bits) gain definitions of new floating-point control or
status bits in future, the implementations of fesetmode for those
architectures may need updating (depending on whether the new bits are
control or status bits and what the implementation does with
previously unknown bits), just like existing implementations of
<fenv.h> functions that take care not to touch reserved bits may need
updating when the set of reserved bits changes.  (As any new bits are
outside the scope of ISO C, that's just a quality-of-implementation
issue for supporting them, not a conformance issue.)

As with fenv_t, femode_t should properly include any software DFP
rounding mode (and for both fenv_t and femode_t I'd consider that
fragment of DFP support appropriate for inclusion in glibc even in the
absence of the rest of libdfp; hardware DFP rounding modes should
already be included if the definitions of which bits are status /
control bits are correct).

Tested for x86_64, x86, mips64 (hard float, and soft float to test the
fallback version), arm (hard float) and powerpc (hard float, soft
float and e500).  Other architecture versions are untested.

	* math/fegetmode.c: New file.
	* math/fesetmode.c: Likewise.
	* sysdeps/i386/fpu/fegetmode.c: Likewise.
	* sysdeps/i386/fpu/fesetmode.c: Likewise.
	* sysdeps/x86_64/fpu/fegetmode.c: Likewise.
	* sysdeps/x86_64/fpu/fesetmode.c: Likewise.
	* math/fenv.h: Update comment on inclusion of <bits/fenv.h>.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (fegetmode): New function
	declaration.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (fesetmode): Likewise.
	* bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New
	typedef.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
	* sysdeps/aarch64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(femode_t): New typedef.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
	* sysdeps/alpha/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(femode_t): New typedef.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
	* sysdeps/arm/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(femode_t): New typedef.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
	* sysdeps/hppa/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(femode_t): New typedef.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
	* sysdeps/ia64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(femode_t): New typedef.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
	* sysdeps/m68k/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(femode_t): New typedef.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
	* sysdeps/microblaze/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(femode_t): New typedef.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
	* sysdeps/mips/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(femode_t): New typedef.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
	* sysdeps/nios2/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(femode_t): New typedef.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
	* sysdeps/powerpc/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(femode_t): New typedef.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (__fe_dfl_mode): New variable
	declaration.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
	* sysdeps/s390/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(femode_t): New typedef.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
	* sysdeps/sh/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(femode_t): New typedef.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
	* sysdeps/sparc/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(femode_t): New typedef.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
	* sysdeps/tile/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(femode_t): New typedef.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
	* sysdeps/x86/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(femode_t): New typedef.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
	* manual/arith.texi (FE_DFL_MODE): Document macro.
	(fegetmode): Document function.
	(fesetmode): Likewise.
	* math/Versions (fegetmode): New libm symbol at version
	GLIBC_2.25.
	(fesetmode): Likewise.
	* math/Makefile (libm-support): Add fegetmode and fesetmode.
	(tests): Add test-femode and test-femode-traps.
	* math/test-femode-traps.c: New file.
	* math/test-femode.c: Likewise.
	* sysdeps/powerpc/fpu/fenv_const.c (__fe_dfl_mode): Declare as
	alias for __fe_dfl_env.
	* sysdeps/powerpc/nofpu/fenv_const.c (__fe_dfl_mode): Likewise.
	* sysdeps/powerpc/powerpc32/e500/nofpu/fenv_const.c
	(__fe_dfl_mode): Likewise.
	* sysdeps/powerpc/Versions (__fe_dfl_mode): New libm symbol at
	version GLIBC_2.25.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-09-07 16:40:09 +00:00
Florian Weimer
4d728087ef Base <sys/quota.h> on Linux kernel headers [BZ #20525] 
Macros which are also defined in <linux/quota.h> are removed, and
<linux/quota.h> is included instead.

This commit cleans up the definition of fs_to_dq_blocks and struct
dqblock and struct dqinfo, too.
 2016-09-01 15:53:13 +02:00
Joseph Myers
780257d48d Add fetestexceptflag. 
TS 18661-1 defines an fetestexceptflag function to test the exception
state saved in an fexcept_t object by fegetexceptflag.

This patch implements this function for glibc.  Almost all
architectures save exception state in such a way that it can be
directly ANDed with exception flag bits, so rather than having lots of
fetestexceptflag implementations that all do the same thing, the math/
implementation is made to use this generic logic (which is also OK in
the fallback case where FE_ALL_EXCEPT is zero).  The only architecture
that seems to need anything different is s390.

(fegetexceptflag and fesetexceptflag use abbreviated filenames
fgetexcptflg.c and fsetexcptflg.c.  Because we are no longer concerned
by 14-character filename limits, fetestexceptflag uses the obvious
filename fetestexceptflag.c.)

The NEWS entry is intended to be expanded along the lines given in
<https://sourceware.org/ml/libc-alpha/2016-08/msg00356.html> when
fegetmode and fesetmode are added.

Tested for x86_64, x86, mips64 and powerpc.

	* math/fetestexceptflag.c: New file.
	* sysdeps/s390/fpu/fetestexceptflag.c: Likewise.  Comment by
	Stefan Liebler.
	* math/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(fetestexceptflag): New function declaration.
	* manual/arith.texi (fetestexceptflag): Document function.
	* math/Versions (fetestexceptflag): New libm symbol at version
	GLIBC_2.25.
	* math/Makefile (libm-support): Add fetestexceptflag.
	(tests): Add test-fetestexceptflag.
	* math/test-fetestexceptflag.c: New file.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-08-29 11:47:21 +00:00
Joseph Myers
5146356f5a Add fesetexcept. 
TS 18661-1 defines an fesetexcept function for setting floating-point
exception flags without the side-effect of causing enabled traps to be
taken.

This patch series implements this function for glibc.  The present
patch adds the fallback stub implementation, x86 and x86_64
implementations, documentation, tests and ABI baseline updates.  The
remaining patches, some of them untested, add implementations for
other architectures.  The implementations generally follow those of
the fesetexceptflag function.

As for fesetexceptflag, the approach taken for architectures where
setting flags causes enabled traps to be taken is to set the flags
(and potentially cause traps) rather than refusing to set the flags
and returning an error.  Since ISO C and TS 18661 provide no way to
enable traps, this is formally in accordance with the standards.

The NEWS entry should be considered a placeholder, since this patch
series is intended to be followed by further such series adding other
TS 18661-1 features, so that the NEWS entry would end up looking more
like

* New <fenv.h> features from TS 18661-1:2014 are added to libm: the
  fesetexcept, fetestexceptflag, fegetmode and fesetmode functions,
  the femode_t type and the FE_DFL_MODE macro.

with hopefully more such entries for other features, rather than
having an entry for a single function in the end.

I believe we have consensus for adding TS 18661-1 interfaces as per
<https://sourceware.org/ml/libc-alpha/2016-06/msg00421.html>.

Tested for x86_64, x86, mips64 (hard float, and soft float to test the
fallback version), arm (hard float) and powerpc (hard float, soft
float and e500).

	* math/fesetexcept.c: New file.
	* sysdeps/i386/fpu/fesetexcept.c: Likewise.
	* sysdeps/x86_64/fpu/fesetexcept.c: Likewise.
	* math/fenv.h: Define
	__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
	<bits/libc-header-start.h> instead of including <features.h>.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (fesetexcept): New function
	declaration.
	* manual/arith.texi (fesetexcept): Document function.
	* math/Versions (fesetexcept): New libm symbol at version
	GLIBC_2.25.
	* math/Makefile (libm-support): Add fesetexcept.
	(tests): Add test-fesetexcept and test-fesetexcept-traps.
	* math/test-fesetexcept.c: New file.
	* math/test-fesetexcept-traps.c: Likewise.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-08-16 16:16:10 +00:00
Florian Weimer
056dd72af8 Add CVE-2016-6323 missing from NEWS entry 2016-08-16 11:18:06 +02:00
Florian Weimer
4d047efdbc Add NEWS entry for CVE-2016-6323 2016-08-16 11:15:09 +02:00
Joseph Myers
412cb261b0 Support __STDC_WANT_IEC_60559_FUNCS_EXT__ feature test macro. 
This patch implements support for the
__STDC_WANT_IEC_60559_FUNCS_EXT__ feature test macro, following the
__GLIBC_USE approach used for other ISO C feature test macros.
Currently this only affects the exp10 functions (which glibc has had
for a long time).

Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).

	* bits/libc-header-start.h (__GLIBC_USE_IEC_60559_FUNCS_EXT): New
	macro.
	* include/features.h (__STDC_WANT_IEC_60559_FUNCS_EXT__):
	Document.
	* manual/creature.texi (__STDC_WANT_IEC_60559_FUNCS_EXT__):
	Document macro.
	* manual/math.texi (exp10): Document as ISO from TS 18661-4:2015.
	(exp10f): Likewise.
	(exp10l): Likewise.
	* math/bits/mathcalls.h (exp10): Declare if
	[__GLIBC_USE (IEC_60559_FUNCS_EXT)], not [__USE_GNU].
 2016-08-03 22:21:37 +00:00
Zack Weinberg
dbab6577c6 Deprecate inclusion of <sys/sysmacros.h> by <sys/types.h> 
The macros defined by <sys/sysmacros.h> are not part of POSIX nor XSI, and
their names frequently collide with user code; see for instance glibc bug
19239 and Red Hat bug 130601.  <stdlib.h> includes <sys/types.h> under
_GNU_SOURCE, and C++ code presently cannot avoid being compiled under
_GNU_SOURCE, exacerbating the problem.

	* NEWS: Inclusion of <sys/sysmacros.h> by <sys/types.h> is deprecated.
	* misc/sys/sysmacros.h: If __SYSMACROS_DEPRECATED_INCLUSION is defined,
	define major, minor, and makedev to issue deprecation warnings on use.
	If __SYSMACROS_DEPRECATED_INCLUSION is *not* defined, suppress
	previously-activated deprecation warnings for these macros and prevent
	subsequent inclusions of this header from having any effect.
	* posix/sys/types.h: Define __SYSMACROS_DEPRECATED_INCLUSION before
	including <sys/sysmacros.h>, and undefine it again afterward.
 2016-08-03 15:28:49 -04:00
Joseph Myers
bf91be88ea Support __STDC_WANT_IEC_60559_BFP_EXT__ feature test macro. 
This patch implements support for the __STDC_WANT_IEC_60559_BFP_EXT__
feature test macro from ISO/IEC 18661-1:2014, following the
__GLIBC_USE approach now used for __STDC_WANT_LIB_EXT2__.  For this
macro, the relevant consideration is whether it is defined or
undefined when an affected header is included (not what its value is
if defined, and not whether it's defined or undefined when any other
unaffected system header is included).

Currently this macro only affects the issignaling macro and the nextup
and nextdown functions (so they can be enabled by defining this macro,
not just by defining _GNU_SOURCE as previously).  Any further features
from this TS added in future would also be conditioned on this macro.

Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).

	* bits/libc-header-start.h (__GLIBC_USE_IEC_60559_BFP_EXT): New
	macro.
	* include/features.h (__STDC_WANT_IEC_60559_BFP_EXT__): Document.
	* manual/arith.texi (issignaling): Document as ISO from TS
	18661-1:2014.
	(nextup): Likewise.
	(nextupf): Likewise.
	(nextupl): Likewise.
	(nextdown): Likewise.
	(nextdownf): Likewise.
	(nextdownl): Likewise.
	* manual/creature.texi (__STDC_WANT_IEC_60559_BFP_EXT__): Document
	macro.
	* math/math.h: Define
	__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
	<bits/libc-header-start.h> instead of including <features.h>.
	(issignaling): Define if [__GLIBC_USE (IEC_60559_BFP_EXT)], not
	[__USE_GNU].
	* math/bits/mathcalls.h (nextdown): Declare if
	[__GLIBC_USE (IEC_60559_BFP_EXT)], not [__USE_GNU].
	(nextup): Likewise.
	(__issignaling): Likewise.
 2016-08-03 17:30:41 +00:00
Joseph Myers
487890009e Support __STDC_WANT_LIB_EXT2__ feature test macro. 
This patch implements support for the __STDC_WANT_LIB_EXT2__ feature
test macro from ISO/IEC TR 24731-2:2010, thereby implementing one
possible approach for supporting ISO C feature test macros.

Recall that, as described in
<https://sourceware.org/ml/libc-alpha/2016-05/msg00486.html>, these
macros work based on the definition when affected headers are
included, so cannot be handled once when the first system header is
included because that might not be one of the headers the particular
macro in question affects.
<https://sourceware.org/ml/libc-alpha/2016-05/msg00680.html> expresses
views on possible approaches for implementation and
<https://sourceware.org/ml/libc-alpha/2016-06/msg00039.html> follows
up on that.

This patch arranges things so that the relevant condition is
__GLIBC_USE (LIB_EXT2), following one of the suggestions given.
Headers using these macros include <bits/libc-header-start.h>, which
in turn includes <features.h>.  Headers must define
__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION before including
<bits/libc-header-start.h>, to discourage inclusion outside glibc as
requested.  __USE_GNU conditions on affected functions are changed to
__GLIBC_USE (LIB_EXT2), while it's added as an additional alternative
on the conditions for functions already enabled for some POSIX
versions.

It would be possible to convert existing __USE_* conditionals to
__GLIBC_USE (with the relevant __GLIBC_USE_* being defined in
<features.h> where __USE_* are presently defined), and so make them
typo-proof (given -Wundef -Werror in glibc builds) because __GLIBC_USE
is used with #if not #ifdef / #if defined.

No attempt is made to enforce the rule about diagnosing different
definitions of __STDC_WANT_LIB_EXT2__ when affected headers are
included; such a diagnostic is incompatible with multiple-include
guards on the affected headers, unless compiler extensions are added
to support it.

As previously noted, glibc does not implement all features from TR
24731-2:2010: the functions aswprintf vaswprintf getwdelim getwline
are not in glibc, although they would be appropriate to add if someone
wished to do so.  But I think it makes sense to support the feature
test macro if *any* of the controlled features are present in glibc.

Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).

	* bits/libc-header-start.h: New file.
	* Makefile (headers): Add bits/libc-header-start.h.
	* include/features.h (__STDC_WANT_LIB_EXT2__): Document.
	(__GLIBC_USE): New macro.
	* libio/stdio.h: Define
	__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
	<bits/libc-header-start.h> instead of including <features.h>.
	(fmemopen): Declare also if [__GLIBC_USE (LIB_EXT2)].
	(open_memstream): Likewise.
	(vasprintf): Declare if [__GLIBC_USE (LIB_EXT2)], not [__USE_GNU].
	(__asprintf): Likewise.
	(asprintf): Likewise.
	(__getdelim): Declare also if [__GLIBC_USE (LIB_EXT2)].
	(getdelim): Likewise.
	(getline): Likewise.
	* string/string.h: Define
	__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
	<bits/libc-header-start.h> instead of including <features.h>.
	(strdup): Declare also if [__GLIBC_USE (LIB_EXT2)]
	(strndup): Likewise.
	* wcsmbs/wchar.h: Define
	__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
	<bits/libc-header-start.h> instead of including <features.h>.
	(open_wmemstream): Declare also if [__GLIBC_USE (LIB_EXT2)].
	* manual/creature.texi (__STDC_WANT_LIB_EXT2__): Document macro.
 2016-08-02 17:40:35 +00:00
Carlos O'Donell
e720d3d9fe Open development for 2.25. 2016-08-01 23:00:21 -04:00
Carlos O'Donell
3c4f81eccc Update libc.pot and NEWS. 2016-08-01 21:24:59 -04:00
Florian Weimer
fab382315a CVE-2016-5417 was assigned to bug 19257 2016-07-29 17:34:17 -04:00