Commit Graph

112 Commits

Author SHA1 Message Date
Andreas Schwab
003e49ed5d Setup LOCPATH for tst-ftell-active-handler and tst-ftell-partial-wide in libio 2014-03-25 12:43:30 +01:00
Joseph Myers
f214606a0e Enumerate tests with special rules in tests-special variable.
This patch is a revised and updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>.

In order to generate overall summaries of the results of all tests in
the glibc testsuite, we need to identify and concatenate the files
with the results of individual tests.

Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this.
However, the normal glibc approach is explicit enumeration of the
expected set of files with a given property, rather than all files
matching some pattern like that.  Furthermore, we would like to be
able to mark tests as UNRESOLVED if the file with their results is for
some reason missing, and in future we would like to be able to mark
tests as UNSUPPORTED if they are disabled for a particular
configuration (rather than simply having them missing from the list of
tests as at present).  Such handling of tests that were not run or did
not record results requires an explicit enumeration of tests.

For the tests following the default makefile rules, $(tests) (and
$(xtests)) provides such an enumeration.  Others, however, are added
directly as dependencies of the "tests" and "xtests" makefile
targets.  This patch changes the makefiles to put them in variables
tests-special and xtests-special, with appropriate dependencies on the
tests listed there then being added centrally.

Those variables are used in Rules and so need to be set before Rules
is included in a subdirectory makefile, which is often earlier in the
makefile than the dependencies were present before.  We previously
discussed the question of where to include Rules; see the question at
<https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a
discussion in
<https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why
Rules is included early rather than late in subdirectory makefiles.

It was necessary to avoid an indirection through the check-abi target
and get the check-abi-* targets for individual libraries into the
tests-special variable.  The intl/ test $(objpfx)tst-gettext.out,
previously built only because of dependencies from other tests, was
also added to tests-special for the same reason.

The entries in tests-special are the full makefile targets, complete
with $(objpfx) and .out.  If a future change causes tests to be named
consistently with a .out suffix, this can be changed to include just
the path relative to $(objpfx), without .out.

Tested x86_64, including that the same set of files is generated in
the build directory by a build and testsuite run both before and after
the patch (except for changes to the
elf/tst-null-argv.debug.out.<number> file name), and a build with
run-built-tests=no to verify there aren't any more obvious instances
of the issue Marcus Shawcroft reported with a previous version in
<https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>.

	* Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	(tests): Depend on $(tests-special).
	* Makerules (check-abi-list): New variable.
	(check-abi): Depend on $(check-abi-list).
	[$(subdir) = elf] (tests-special): Add
	$(objpfx)check-abi-libc.out.
	[$(build-shared) = yes && subdir] (tests-special): Add
	$(check-abi-list).
	[$(build-shared) = yes && subdir] (tests): Do not depend on
	check-abi.
	* Rules (tests): Depend on $(tests-special).
	(xtests): Depend on $(xtests-special).
	* catgets/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* conform/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* elf/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* grp/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* iconv/Makefile (xtests): Change dependencies to ....
	(xtests-special): ... additions to this variable.
	* iconvdata/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* intl/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.  Also add
	$(objpfx)tst-gettext.out.
	* io/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* libio/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* malloc/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* misc/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* nptl/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* nptl_db/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* posix/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	(xtests): Change dependencies to ....
	(xtests-special): ... additions to this variable.
	* resolv/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	(xtests): Change dependencies to ....
	(xtests-special): ... additions to this variable.
	* stdio-common/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	(do-tst-unbputc): Remove target.
	(do-tst-printf): Likewise.
	* stdlib/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* string/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* sysdeps/x86/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.

localedata:
	* Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
2014-03-06 22:35:33 +00:00
Siddhesh Poyarekar
000232b9bc Separate ftell from fseek logic and avoid modifying FILE data (#16532)
ftell semantics are distinct from fseek(SEEK_CUR) especially when it
is called on a file handler that is not yet active.  Due to this
caveat, much care needs to be taken while modifying the handler data
and hence, this first iteration on separating out ftell focusses on
maintaining handler data integrity at all times while it figures out
the current stream offset.  The result is that it makes a syscall for
every offset request.

There is scope for optimizing this by caching offsets when we know
that the handler is active.  A simple way to find out is when the
buffers have data.  It is not so simple to find this out when the
buffer is empty without adding some kind of flag.
2014-03-04 07:45:58 +05:30
Roland McGrath
f08e9a2629 Fix fallout from Joseph's untested Makeconfig change. 2014-02-28 13:00:27 -08:00
Joseph Myers
a5f891ac8d Consistently include Makeconfig after defining subdir.
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I
noted it was necessary to add includes of Makeconfig early in various
subdirectory makefiles for the tests-special variable settings added
by that patch to be conditional on configuration information.  No-one
commented on the general question there of whether Makeconfig should
always be included immediately after the definition of subdir.

This patch implements that early inclusion of Makeconfig in each
directory (which is a lot easier than consistent placement of includes
of Rules).  Includes are added if needed, or moved up if already
present.  Subdirectory "all:" targets are removed, since Makeconfig
provides one.

There is potential for further cleanups I haven't done.  Rules and
Makerules have code such as

ifneq   "$(findstring env,$(origin headers))" ""
headers :=
endif

to override to empty any value of various variables that came from the
environment.  I think there is a case for Makeconfig setting all the
subdirectory variables (other than subdir) to empty to ensure no
outside value is going to take effect if a subdirectory fails to
define a variable.  (A list of such variables, possibly out of date
and incomplete, is in manual/maint.texi.)  Rules and Makerules would
give errors if Makeconfig hadn't already been included, instead of
including it themselves.  The special code to override values coming
from the environment would then be obsolete and could be removed.

Tested x86_64, including that installed binaries are identical before
and after the patch.

	* argp/Makefile: Include Makeconfig immediately after defining
	subdir.
	* assert/Makefile: Likewise.
	* benchtests/Makefile: Likewise.
	* catgets/Makefile: Likewise.
	* conform/Makefile: Likewise.
	* crypt/Makefile: Likewise.
	* csu/Makefile: Likewise.
	(all): Remove target.
	* ctype/Makefile: Include Makeconfig immediately after defining
	subdir.
	* debug/Makefile: Likewise.
	* dirent/Makefile: Likewise.
	* dlfcn/Makefile: Likewise.
	* gmon/Makefile: Likewise.
	* gnulib/Makefile: Likewise.
	* grp/Makefile: Likewise.
	* gshadow/Makefile: Likewise.
	* hesiod/Makefile: Likewise.
	* hurd/Makefile: Likewise.
	(all): Remove target.
	* iconvdata/Makefile: Include Makeconfig immediately after
	defining subdir.
	* inet/Makefile: Likewise.
	* intl/Makefile: Likewise.
	* io/Makefile: Likewise.
	* libio/Makefile: Likewise.
	(all): Remove target.
	* locale/Makefile: Include Makeconfig immediately after defining
	subdir.
	* login/Makefile: Likewise.
	* mach/Makefile: Likewise.
	(all): Remove target.
	* malloc/Makefile: Include Makeconfig immediately after defining
	subdir.
	(all): Remove target.
	* manual/Makefile: Include Makeconfig immediately after defining
	subdir.
	* math/Makefile: Likewise.
	* misc/Makefile: Likewise.
	* nis/Makefile: Likewise.
	* nss/Makefile: Likewise.
	* po/Makefile: Likewise.
	(all): Remove target.
	* posix/Makefile: Include Makeconfig immediately after defining
	subdir.
	* pwd/Makefile: Likewise.
	* resolv/Makefile: Likewise.
	* resource/Makefile: Likewise.
	* rt/Makefile: Likewise.
	* setjmp/Makefile: Likewise.
	* shadow/Makefile: Likewise.
	* signal/Makefile: Likewise.
	* socket/Makefile: Likewise.
	* soft-fp/Makefile: Likewise.
	* stdio-common/Makefile: Likewise.
	* stdlib/Makefile: Likewise.
	* streams/Makefile: Likewise.
	* string/Makefile: Likewise.
	* sunrpc/Makefile: Likewise.
	(all): Remove target.
	* sysvipc/Makefile: Include Makeconfig immediately after defining
	subdir.
	* termios/Makefile: Likewise.
	* time/Makefile: Likewise.
	* timezone/Makefile: Likewise.
	(all): Remove target.
	* wcsmbs/Makefile: Include Makeconfig immediately after defining
	subdir.
	* wctype/Makefile: Likewise.

libidn/ChangeLog:
	* Makefile: Include Makeconfig immediately after defining subdir.

localedata/ChangeLog:
	* Makefile: Include Makeconfig immediately after defining subdir.
	(all): Remove target.

nptl/ChangeLog:
	* Makefile: Include Makeconfig immediately after defining subdir.

nptl_db/ChangeLog:
	* Makefile: Include Makeconfig immediately after defining subdir.
2014-02-26 23:12:03 +00:00
Joseph Myers
f0881698bf Generate .test-result files for tests with special rules.
This patch, an updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html> now
proposed for inclusion in glibc, extends the generation of PASS and
FAIL status in .test-result files for individual tests to cover tests
with their own custom makefile rules.  This is just adding
$(evaluate-test) calls to all such rules, since tests with multiple
commands were previously split into separate tests.

Note that the tests the makefiles expect to fail (posix/annexc and
conformtest) currently get FAIL listed in the .test-result file,
rather than XFAIL; a subsequent patch will introduce a better XFAIL
mechanism.

Tested x86_64.

	* Makefile ($(objpfx)c++-types-check.out): Use $(evaluate-test).
	($(objpfx)check-local-headers.out): Likewise.
	($(objpfx)begin-end-check.out): Likewise.
	* Makerules (check-abi-%.out): Likewise.
	* catgets/Makefile ($(objpfx)test1.cat): Likewise.
	($(objpfx)test2.cat): Likewise.
	($(objpfx)de/libc.cat): Likewise.
	($(objpfx)test-gencat.out): Likewise.
	* conform/Makefile ($(objpfx)run-conformtest.out): Likewise.
	* elf/Makefile ($(objpfx)order-cmp.out): Likewise.
	($(objpfx)noload-mem): Likewise.
	($(objpfx)tst-pathopt.out): Likewise.
	($(objpfx)tst-rtld-load-self.out): Likewise.
	($(objpfx)tst-array1-cmp.out): Likewise.
	($(objpfx)tst-array1-static-cmp.out): Likewise.
	($(objpfx)tst-array2-cmp.out): Likewise.
	($(objpfx)tst-array3-cmp.out): Likewise.
	($(objpfx)tst-array4-cmp.out): Likewise.
	($(objpfx)tst-array5-cmp.out): Likewise.
	($(objpfx)tst-array5-static-cmp.out): Likewise.
	($(objpfx)check-textrel.out): Likewise.
	($(objpfx)check-execstack.out): Likewise.
	($(objpfx)check-localplt.out): Likewise.
	($(objpfx)order2-cmp.out): Likewise.
	($(objpfx)tst-leaks1-mem): Likewise.
	($(objpfx)tst-leaks1-static-mem): Likewise.
	($(objpfx)tst-initorder-cmp.out): Likewise.
	($(objpfx)tst-initorder2-cmp.out): Likewise.
	($(objpfx)tst-unused-dep.out): Likewise.
	($(objpfx)tst-unused-dep-cmp.out): Likewise.
	* grp/Makefile ($(objpfx)tst_fgetgrent.out): Likewise.
	* iconv/Makefile (test-iconvconfig): Likewise.
	* iconvdata/Makefile ($(objpfx)mtrace-tst-loading): Likewise.
	($(objpfx)iconv-test.out): Likewise.
	($(objpfx)tst-tables.out): Likewise.
	* intl/Makefile ($(objpfx)mtrace-tst-gettext): Likewise.
	($(objpfx)tst-gettext.out): Likewise.
	($(objpfx)tst-translit.out): Likewise.
	($(objpfx)tst-gettext2.out): Likewise.
	($(objpfx)tst-gettext4.out): Likewise.
	($(objpfx)tst-gettext6.out): Likewise.
	* io/Makefile ($(objpfx)ftwtest.out): Likewise.
	* libio/Makefile ($(objpfx)test-freopen.out): Likewise.
	($(objpfx)tst-fopenloc-cmp.out): Likewise.
	($(objpfx)tst-fopenloc-mem.out): Likewise.
	* malloc/Makefile ($(objpfx)tst-mtrace.out): Likewise.
	* misc/Makefile ($(objpfx)tst-error1-mem): Likewise.
	* posix/Makefile ($(objpfx)globtest.out): Likewise.
	($(objpfx)wordexp-tst.out): Likewise.
	($(objpfx)annexc.out): Likewise.
	($(objpfx)tst-fnmatch-mem): Likewise.
	($(objpfx)bug-regex2-mem): Likewise.
	($(objpfx)bug-regex14-mem): Likewise.
	($(objpfx)bug-regex21-mem): Likewise.
	($(objpfx)bug-regex31-mem): Likewise.
	($(objpfx)tst-vfork3-mem): Likewise.
	($(objpfx)tst-rxspencer-no-utf8-mem): Likewise.
	($(objpfx)tst-pcre-mem): Likewise.
	($(objpfx)tst-boost-mem): Likewise.
	($(objpfx)tst-getconf.out): Likewise.
	($(objpfx)bug-ga2-mem): Likewise.
	($(objpfx)bug-glob2-mem): Likewise.
	* resolv/Makefile ($(objpfx)mtrace-tst-leaks): Likewise.
	($(objpfx)mtrace-tst-leaks2): Likewise.
	* stdio-common/Makefile ($(objpfx)tst-unbputc.out): Likewise.
	($(objpfx)tst-printf.out): Likewise.
	($(objpfx)tst-setvbuf1.out): Likewise.
	($(objpfx)tst-setvbuf1-cmp.out): Likewise.
	* stdlib/Makefile ($(objpfx)isomac.out): Likewise.
	($(objpfx)tst-fmtmsg.out): Likewise.
	* string/Makefile ($(objpfx)tst-svc-cmp.out): Likewise.
	* sysdeps/x86/Makefile ($(objpfx)tst-xmmymm.out): Likewise.

localedata:
	* Makefile ($(objpfx)sort-test.out): Use $(evaluate-test).
	($(objpfx)tst-fmon.out): Likewise.
	($(objpfx)tst-numeric.out): Likewise.
	($(objpfx)tst-locale.out): Likewise.
	($(objpfx)tst-rpmatch.out): Likewise.
	($(objpfx)tst-trans.out): Likewise.
	($(objpfx)tst-mbswcs.out): Likewise.
	($(objpfx)tst-ctype.out): Likewise.
	($(objpfx)tst-wctype.out): Likewise.
	($(objpfx)tst-langinfo.out): Likewise.
	($(objpfx)mtrace-tst-leaks): Likewise.

nptl:
	* Makefile ($(objpfx)tst-stack3-mem): Use $(evaluate-test).
	($(objpfx)tst-tls6.out): Likewise.
	($(objpfx)tst-cleanup0.out): Likewise.
	($(objpfx)tst-cleanup0-cmp.out): Likewise.
	($(objpfx)tst-cancel-wrappers.out): Likewise.
	($(objpfx)tst-oddstacklimit.out): Likewise.

nptl_db:
	* Makefile ($(objpfx)db-symbols.out): Use
	$(evaluate-test).
2014-02-21 21:48:08 +00:00
Joseph Myers
7f98f1806a Split up rules for tests using mtrace and something else.
Most glibc tests that use mtrace to verify that there were no memory
leaks from the glibc facilities used in a given test depend on the
.out file of the previous test so that the mtrace test runs mtrace and
nothing else.

Two, however, have a single target combining mtrace with something
else.  In the case of libio/tst-fopenloc.check, the test both compares
the output with an expected baseline and runs mtrace.  In the case of
posix/tst-rxspencer-mem, the test is run (with different command line
from the main run) and then mtrace is run, from the same makefile
target.

This patch splits both of these tests up to use separate makefile
targets for each thing tested; in the tst-rxspencer case, a file
tst-rxspencer-no-utf8.c is created that just includes tst-rxspencer.c,
as is usual for tests where the same code gets tested in different
compile-time or runtime configurations.

Adding $(evaluate-test) to test commands, as in
<https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html>, will no
longer need to insert && between multiple commands, as all tests will
either have just a single command or already use &&.

Tested x86_64.

	* libio/Makefile ($(objpfx)tst-fopenloc.check): Split into
	separate $(objpfx)tst-fopenloc-cmp.out and
	$(objpfx)tst-fopenloc-mem.out targets.
	(tests): Update dependencies.
	* posix/Makefile (tests variable): Add tst-rxspencer-no-utf8.
	(generated): Change tst-rxspencer-mem and tst-rxspencer.mtrace to
	tst-rxspencer-no-utf8-mem and tst-rxspencer-no-utf8.mtrace.
	(tst-rxspencer-no-utf8-ARGS): New variable.
	(tst-rxspencer-no-utf8-ENV): Likewise.
	(tests target): Depend on $(objpfx)tst-rxspencer-no-utf8-mem
	instead of $(objpfx)tst-rxspencer-mem.
	($(objpfx)tst-rxspencer-mem): Change target to
	$(objpfx)tst-rxspencer-no-utf8-mem.  Depend on
	$(objpfx)tst-rxspencer-no-utf8.out instead of running test program.
	* posix/tst-rxspencer-no-utf8.c: New file.
2014-02-14 13:45:14 +00:00
Siddhesh Poyarekar
df675f9933 Fix infinite loop in ftell when writing wide char data (BZ #16398)
ftell tries to avoid flushing the buffer when it is in write mode by
converting the wide char data and placing it into the binary buffer.
If the output buffer space is full and there is data to write, the
code reverts to flushing the buffer.  This breaks when there is space
in the buffer but it is not enough to convert the next character in
the wide data buffer, due to which __codecvt_do_out returns a
__codecvt_partial status.  In this case, ftell keeps running in an
infinite loop.

The fix here is to detect the __codecvt_partial status in addition to
checking if the buffer is full.  I have also added a test case that
demonstrates the infinite loop.
2014-02-05 12:49:00 +05:30
Allan McRae
d4697bc93d Update copyright notices with scripts/update-copyrights 2014-01-01 22:00:23 +10:00
Joseph Myers
3f2e46a494 Remove --disable-versioning. 2013-09-04 15:25:42 +00:00
H.J. Lu
740b3dbee8 Add --enable-hardcoded-path-in-tests configure option 2013-01-11 07:14:18 -08:00
Joseph Myers
568035b787 Update copyright notices with scripts/update-copyrights. 2013-01-02 19:05:09 +00:00
Mike Frysinger
eb6cbd249f [BZ #12724] libio: revert partial POSIX 2008 fclose support
In BZ #12724, partial support for POSIX 2008 fclose behavior was added.
Since it isn't entirely conforming to the spec, some applications are
known to be breaking in this intermediate state.  So revert the partial
support until we can get things fully implemented.

This reverts commit fcabc0f8b1.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-12-01 21:37:52 -05:00
Siddhesh Poyarekar
de2fd463b1 Make fwrite return 0 on EOF 2012-11-28 01:00:50 +05:30
Joseph Myers
03ac099f6b Define and use $(run-built-tests). 2012-10-24 00:08:46 +00:00
Siddhesh Poyarekar
4573c6b098 Adjust wide data buffer pointers during fseek and ftell
[BZ #14543]
Set the internal buffer state correctly whenever the external buffer
state is modified by fseek by either computing the current
_IO_read_ptr/end for the internal buffer based on the new _IO_read_ptr
in the external buffer or converting the content read into the
external buffer, up to the extent of the requested fseek offset.
2012-09-28 18:21:39 +05:30
Dmitry V. Levin
57c69bef13 Set "fail on error" mode directly in testsuite shell scripts 2012-09-25 02:48:31 +00:00
H.J. Lu
bcba7aa24d Run tst-fopenloc if $(build-shared) is yes 2012-09-10 11:13:54 -07:00
Roland McGrath
c75ccd4c3a Clean up definition of _LIBC_REENTRANT and _IO_MTSAFE_IO. 2012-08-17 09:35:15 -07:00
Ulrich Drepper
a4300c7a4d Remove distribute variable from Makefiles 2012-03-07 05:17:13 -05:00
Paul Eggert
59ba27a63a Replace FSF snail mail address with URLs. 2012-02-09 23:18:22 +00:00
Ulrich Drepper
fcabc0f8b1 Fix file descriptor position after fclose
fclose should leave the file descriptor position after the last read
or written byte.
2011-05-13 21:08:45 -04:00
Andreas Schwab
5d2e69766a Fix fsetpos on wide stream. 2009-09-02 19:45:33 -07:00
Ulrich Drepper
eae3208e24 Run tst-fgetwc with necessary envvar. 2009-06-16 07:48:27 -07:00
Ulrich Drepper
82f2e9c6bd 2009-02-04 Ulrich Drepper <drepper@redhat.com>
* libio/wfileops.c (_IO_wfile_underflow): Fix handling of
	incomplete characters at end of input buffer.
	* libio/Makefile (tests): Add tst-fgetwc.
	* libio/tst-fgetwc.c: New file.
	* libio/tst-fgetwc.input: New file.
2009-02-04 21:27:48 +00:00
Ulrich Drepper
d6e0c2a67d * sysdeps/unix/sysv/linux/syscalls.list: Add __pipe2 alias.
* io/pipe2.c: Likewise.
	* sysdeps/unix/sysv/linux/kernel-features.h: Define __ASSUME_PIPE2
	instead of __ASSUME_PACCEPT.
	* include/unistd.h: Declare __have_pipe2.
	* libio/iopopen.c: Implement "e" flag.
	* libio/Makefile (tests): Add tst-popen1.
	* libio/tst-popen1.c: New file.
2008-07-27 18:26:13 +00:00
Ulrich Drepper
7e39d8025d * libio/Makefile (tests): Add tst-ext2.
* libio/tst-ext2.c: New file.
2007-10-13 07:33:09 +00:00
Ulrich Drepper
1e88bd0f1b [BZ #2337]
2006-12-13  Ulrich Drepper  <drepper@redhat.com>
	[BZ #2337]
	* libio/Makefile (tests): Add tst-setvbuf1.
	* libio/tst-setvbuf1.c: New file.

2006-12-08  Jakub Jelinek  <jakub@redhat.com>

	[BZ #2337]
	* libio/genops.c (__uflow): Fix a typo.
	* libio/wfiledoalloc.c (_IO_wfile_doallocate): Don't stat
	nor set _IO_LINE_BUF bit here.  Size the wide buffer based on
	the narrow buffer size.

2006-11-24  Jakub Jelinek  <jakub@redhat.com>

	[BZ #2337]
	* libio/libio.h (_IO_FLAGS2_USER_WBUF): Define.
	* libio/wgenops.c (_IO_wsetb, _IO_wdefault_finish): Test and set
	_IO_FLAGS2_USER_WBUF bit in _flags2 instead of _IO_USER_BUF bit
	in _flags.
	* libio/wstrops.c (_IO_wstr_overflow, enlarge_userbuf,
	_IO_wstr_finish): Likewise.
	* libio/wmemstream.c (open_wmemstream): Likewise.
	* libio/fileops.c (_IO_new_file_close_it): Call _IO_set[bgp]
	even for wide streams.
2006-12-13 23:17:54 +00:00
Ulrich Drepper
107b8a922a [BZ #1996]
2006-08-14  Ulrich Drepper  <drepper@redhat.com>
	[BZ #1996]
	* libio/memstream.c (open_memstream): Allocate initial buffer with
	calloc.
	* libio/wmemstream.c (open_wmemstream): Likewise.
	* libio/strops.c: Pretty printing.
	(_IO_str_overflow): Clear uninitialized part of the new buffer.
	(enlarge_userbuf): New function.
	(_IO_str_seekoff): Call it if seek position is larger than current
	buffer.
	* libio/wstrops.c: Likewise.
	* libio/vasprintf.c: Add comment as to why we do not have to use
	calloc instead of malloc to allocate initial buffer.
	* libio/Makefile (tests): Add bug-memstream1 and bug-wmemstream1.
	* libio/bug-memstream1.c: New file.
	* libio/bug-wmemstream1.c: New file.
2006-08-14 22:16:14 +00:00
Ulrich Drepper
01715b0337 [BZ #2173]
2006-01-18  Ulrich Drepper  <drepper@redhat.com>
	[BZ #2173]
	* libio/fileops.c (_IO_new_file_fopen): If ,ccs= is given, also
	set vtable to the wide vtable.
	* libio/tst-fopenloc2.c: New file.
	* libio/Makefile (tests): Add tst-fopenloc2.

	* sysdeps/unix/sysv/linux/shm_open.c [__ASSUME_TMPFS_NAME]
2006-01-19 01:35:28 +00:00
Ulrich Drepper
63f8fe5456 * libio/stdio.h: Declare open_wmemstream.
* libio/Versions: Export open_wmemstream for GLIBC_2.4.
2006-01-16 20:14:50 +00:00
Roland McGrath
c6251f036c * math/math.h [__NO_LONG_DOUBLE_MATH] (__nldbl_nexttowardf): New
prototype.
	(nexttowardf): Redirect to __nldbl_nexttowardf.
	(nexttoward): Redirect to nextafter.
	(__MATHDECL_2, __MATHDECL_1): Redirect *l functions to
	non-*l versions if __LONG_DOUBLE_MATH_OPTIONAL and
	__NO_LONG_DOUBLE_MATH.
	* math/complex.h (__MATHDECL_1): Likewise.
	* math/bits/mathcalls.h (nexttoward): Don't prototype if
	__LDBL_COMPAT.
	* misc/sys/cdefs.h: Include <bits/wordsize.h>.
	(__LDBL_COMPAT, __LDBL_REDIR1, __LDBL_REDIR, __LDBL_REDIR1_NTH,
	__LDBL_REDIR_NTH, __LDBL_REDIR_DECL): New macros.

	* libio/bits/stdio-ldbl.h: New file.
	* libio/Makefile (headers): Add it.
	* libio/stdio.h [__LDBL_COMPAT]: #include it.
	* libio/bits/libio-ldbl.h: New file.
	* libio/Makefile (headers): Add it.
	* libio/libio.h [__LDBL_COMPAT]: #include it.
	* libio/libioP.h: Include <math_ldbl_opt.h>.
	* include/wchar.h (__fwprintf, __vfwprintf): Fix commented out
	attribute.
	(__vfwprintf_chk): New prototype.  Add libc_hidden_proto.
	* wcsmbs/bits/wchar-ldbl.h: New file.
	* wcsmbs/Makefile (headers): Add it.
	* wcsmbs/wchar.h [__LDBL_COMPAT]: #include it.
	* wcsmbs/bits/wchar2.h (__vswprintf_alias): Removed.
	(vswprintf): Define as a macro rather than inline function.
	* stdio-common/bits/printf-ldbl.h: New file.
	* stdio-common/Makefile (headers): Add it.
	* stdio-common/printf.h [__LDBL_COMPAT]: #include it.
	* libio/fwprintf.c: Include libioP.h.
	(fwprintf): Use ldbl_weak_alias instead of weak_alias.
	* libio/fwscanf.c: Include libioP.h.
	(fwscanf): Rename to __fwscanf and add ldbl_strong_alias.
	* libio/iovdprintf.c (vdprintf): Use ldbl_weak_alias instead of
	weak_alias.
	* libio/iovsprintf.c (_IO_vsprintf): Rename to __IO_vsprintf,
	add ldbl_strong_alias and use INTDEF2 instead of INTDEF.
	(vsprintf): Use ldbl_weak_alias instead of weak_alias.
	* libio/iovsscanf.c (__vsscanf, vsscanf): Use ldbl_weak_alias
	instead of weak_alias.
	* libio/iovswscanf.c (vswscanf): Rename to __vswscanf,
	add ldbl_strong_alias and use ldbl_hidden_def instead of
	libc_hidden_def.
	* libio/obprintf.c (obstack_printf, obstack_vprintf): Use
	ldbl_weak_alias instead of weak_alias.
	* libio/swprintf.c: Include libioP.h.
	(swprintf): Rename to __swprintf and add ldbl_strong_alias.
	* libio/swscanf.c: Include libioP.h.
	(swscanf): Rename to __swscanf and add ldbl_strong_alias.
	* libio/vasprintf.c (vasprintf): Use ldbl_weak_alias instead of
	weak_alias.
	* libio/vscanf.c (vscanf): Use ldbl_weak_alias instead of
	weak_alias.
	* libio/vsnprintf.c (__vsnprintf, vsnprintf): Use ldbl_weak_alias
	instead of weak_alias.
	* libio/vswprintf.c (__vswprintf): Remove alias.
	(vswprintf): Use ldbl_weak_alias instead of weak_alias.
	* libio/vwprintf.c: Include libioP.h.
	(vwprintf): Rename to __vwprintf and add ldbl_strong_alias.
	* libio/vwscanf.c (vwscanf): Rename to __vwscanf and add
	ldbl_strong_alias.
	* libio/wprintf.c: Include libioP.h.
	(wprintf): Rename to __wprintf and add ldbl_strong_alias.
	* libio/wscanf.c: Include libioP.h.
	(wscanf): Rename to __wscanf and add ldbl_strong_alias.
	* stdio-common/asprintf.c (__asprintf): Rename to ___asprintf, add
	ldbl_strong_alias and use INTDEF2 instead of INTDEF.
	(asprintf): Use ldbl_weak_alias instead of weak_alias.
	* stdio-common/dprintf.c (dprintf): Rename to __dprintf, add
	ldbl_strong_alias and use ldbl_hidden_def instead of
	libc_hidden_def.
	* stdio-common/fprintf.c: Include libioP.h.
	(fprintf): Rename to __fprintf, add ldbl_strong_alias and
	use ldbl_hidden_def instead of libc_hidden_def.
	(_IO_fprintf): Use ldbl_weak_alias instead of weak_alias.
	* stdio-common/fscanf.c: Include libioP.h.
	(fscanf): Rename to __fscanf and add ldbl_strong_alias.
	* stdio-common/printf.c: Include libioP.h.
	(printf): Rename to __printf and add ldbl_strong_alias.
	(_IO_printf): Use ldbl_strong_alias instead of strong_alias.
	* stdio-common/printf_fp.c (__printf_fp): Rename to __printf_fp, add
	ldbl_strong_alias and use ldbl_hidden_def instead of
	libc_hidden_def.
	* stdio-common/printf_size.c (printf_size): Rename to __printf_size
	and add ldbl_strong_alias.
	* stdio-common/scanf.c (scanf): Rename to __scanf and add
	ldbl_strong_alias.
	* stdio-common/snprintf.c (snprintf): Use ldbl_weak_alias instead of
	weak_alias.
	* stdio-common/sprintf.c (sprintf): Rename to __sprintf, add
	ldbl_strong_alias and use ldbl_hidden_def instead of
	libc_hidden_def.
	(_IO_sprintf): Use ldbl_strong_alias instead of strong_alias.
	* stdio-common/sscanf.c: Include libioP.h instead of iolibio.h.
	(sscanf): Rename to __sscanf and add ldbl_strong_alias.
	* stdio-common/vfprintf.c (vfprintf): Define to
	_IO_vfprintf_internal.  Use ldbl_strong_alias instead.  Use
	ldbl_hidden_def instead of libc_hidden_def.
	(_IO_vfprintf_internal): Clear is_long_double if __ldbl_is_dbl,
	handle the argument as double if it is non-zero.
	(vfwprintf): Use ldbl_weak_alias instead of weak_alias.
	(_IO_vfprintf): Add ldbl_strong_alias.
	* stdio-common/vfscanf.c (_IO_vfscanf): Rename to
	_IO_vfscanf_internal, don't use strtold if __ldbl_is_dbl, add
	ldbl_strong_alias.
	(vfwscanf): Use ldbl_weak_alias instead of weak_alias.
	(__vfscanf): Rename to ___vfscanf, add ldbl_strong_alias and
	use ldbl_hidden_def instead of libc_hidden_def.
	(vfscanf): Use ldbl_weak_alias instead of weak_alias.
	* stdio-common/vprintf.c: Include libioP.h.
	(vprintf): Rename to __vprintf and add ldbl_strong_alias.
	* debug/fprintf_chk.c (__fprintf_chk): Rename to ___fprintf_chk
	and add ldbl_strong_alias.
	* debug/printf_chk.c (__printf_chk): Rename to ___printf_chk
	and add ldbl_strong_alias.
	* debug/snprintf_chk.c: Include libioP.h.
	(__snprintf_chk): Rename to ___snprintf_chk and add ldbl_strong_alias.
	* debug/sprintf_chk.c: Include libioP.h.
	(__sprintf_chk): Rename to ___sprintf_chk and add ldbl_strong_alias.
	* debug/vfprintf_chk.c (__vfprintf_chk): Rename to ___vfprintf_chk,
	add ldbl_strong_alias and use ldbl_hidden_def instead of
	libc_hidden_def.
	* debug/vfwprintf_chk.c (__vfwprintf_chk): Add libc_hidden_def.
	* debug/vprintf_chk.c (__vprintf_chk): Rename to ___vprintf_chk
	and add ldbl_strong_alias.
	* debug/vsnprintf_chk.c (__vsnprintf_chk): Rename to ___vsnprintf_chk,
	add ldbl_strong_alias and use ldbl_hidden_def instead of
	libc_hidden_def.
	* debug/vsprintf_chk.c (__vsprintf_chk): Rename to ___vsprintf_chk,
	add ldbl_strong_alias and use ldbl_hidden_def instead of
	libc_hidden_def.

	* stdlib/stdlib.h (strtold): Don't define inline if [!__LDBL_COMPAT].
	* wcsmbs/wchar.h (wcstold): Likewise.
	* stdlib/strtod_l.c: Include math_ldbl_opt.h.
	(____STRTOF_INTERNAL): Define.
	(INTERNAL (__STRTOF)): Rename to ____STRTOF_INTERNAL.
	(__STRTOF): Call ____STRTOF_INTERNAL instead.
	[LONG_DOUBLE_COMPAT] (strtold_l, wcstold_l, __strtold_l, __wcstold_l):
	Add compatibility symbols.
	* stdlib/strtod.c: Include math_ldbl_opt.h.
	[LONG_DOUBLE_COMPAT] (strtold, wcstold, __strtold_internal,
	__wcstold_internal): Add compatibility symbols.
	* stdlib/strtold.c: Include bits/wordsize.h, wchar.h.
	(NEW, NEW1): Define.
	(__new_strtold, __new_wcstold): New prototypes.
	(____new_strtold_internal, ____new_wcstold_internal): Likewise.
	Add libc_hidden_proto.
	(STRTOF): Define to NEW (*told).
	[__LONG_DOUBLE_MATH_OPTIONAL] (wcstold, strtold): Add
	long_double_symbol.
	[__LONG_DOUBLE_MATH_OPTIONAL] (__wcstold_internal,
	__strtold_internal): Likewise. Add libc_hidden_ver.

	* stdlib/bits/stdlib-ldbl.h: New file.
	* stdlib/Makefile (headers): Add it.
	* stdlib/stdlib.h [__LDBL_COMPAT]: #include it.
	* include/stdlib.h (ecvt_r, fcvt_r, qecvt_r, qfcvt_r): Remove
	libc_hidden_proto.
	(__ecvt, __fcvt, __gcvt, __ecvt_r, __fcvt_r, __qecvt, __qfcvt,
	__qgcvt, __qecvt_r, __qfcvt_r): New prototypes.
	* misc/efgcvt_r.c: Include shlib-compat.h.
	(LONG_DOUBLE_CVT): Define.
	(__APPEND, __APPEND2): Define.
	(*fcvt_r): Use __APPEND instead of APPEND.  Remove libc_hidden_def.
	(*ecvt_r): Likewise.
	(cvt_symbol): Define.  Use it on fcvt_r and ecvt_r.
	* misc/efgcvt.c: Include shlib-compat.h.
	(LONG_DOUBLE_CVT): Define.
	(__APPEND, __APPEND2): Define.
	(fcvt): Use __APPEND instead of APPEND.  Remove libc_hidden_def.
	(ecvt, gcvt): Likewise.
	(cvt_symbol): Define.  Use it on fcvt, ecvt and gcvt.

	* stdlib/bits/monetary-ldbl.h: New file.
	* stdlib/Makefile (headers): Add it.
	* stdlib/monetary.h [__LDBL_COMPAT]: #include it.
	* stdlib/strfmon.c: Include math_ldbl_opt.h.
	(strfmon): Rename to __strfmon and add ldbl_strong_alias.
	* stdlib/strfmon_l.c: Remove all traces of [!USE_IN_LIBIO].
	(__vstrfmon_l): Don't set is_long_double if __ldbl_is_dbl.
	(__strfmon_l): Rename to ___strfmon_l and add ldbl_strong_alias.
	(strfmon_l): Use ldbl_weak_alias instead of weak_alias.

	* misc/bits/syslog-ldbl.h: New file.
	* misc/Makefile (headers): Add it.
	* misc/sys/syslog.h [__LDBL_COMPAT]: #include it.
	* misc/syslog.c: Include math_ldbl_opt.h.
	(syslog): Rename to __syslog and add ldbl_strong_alias,
	use ldbl_hidden_def instead of libc_hidden_def.
	(vsyslog): Rename to __vsyslog and add ldbl_strong_alias,
	use ldbl_hidden_def instead of libc_hidden_def.

	* sysdeps/generic/math_ldbl_opt.h: New file.
	* math/w_j1l.c (j1l, y1l): Rename to __ prefixed variants.
	Add weak_alias.
	* math/w_j0l.c (j0l, y0l): Likewise.
	* math/w_jnl.c (jnl, ynl): Likewise.
	* sysdeps/ieee754/ldbl-96/s_nexttoward.c
	(__nexttowardl): Remove strong_alias.
	(nexttowardl): Remove weak_alias.
	* sysdeps/ieee754/ldbl-96/s_erfl.c
	(__erfl, __erfcl): Remove strong_alias.
	(erfl, erfcl): Remove weak_alias.

	* sysdeps/ieee754/ldbl-64-128/s_asinhl.c: New file.
	* sysdeps/ieee754/ldbl-64-128/s_atanl.c: New file.
	* sysdeps/ieee754/ldbl-64-128/s_cbrtl.c: New file.
	* sysdeps/ieee754/ldbl-64-128/s_ceill.c: New file.
	* sysdeps/ieee754/ldbl-64-128/s_copysignl.c: New file.
	* sysdeps/ieee754/ldbl-64-128/s_cosl.c: New file.
	* sysdeps/ieee754/ldbl-64-128/s_erfl.c: New file.
	* sysdeps/ieee754/ldbl-64-128/s_expm1l.c: New file.
	* sysdeps/ieee754/ldbl-64-128/s_fabsl.c: New file.
	* sysdeps/ieee754/ldbl-64-128/s_finitel.c: New file.
	* sysdeps/ieee754/ldbl-64-128/s_floorl.c: New file.
	* sysdeps/ieee754/ldbl-64-128/s_fpclassifyl.c: New file.
	* sysdeps/ieee754/ldbl-64-128/s_frexpl.c: New file.
	* sysdeps/ieee754/ldbl-64-128/s_ilogbl.c: New file.
	* sysdeps/ieee754/ldbl-64-128/s_isinfl.c: New file.
	* sysdeps/ieee754/ldbl-64-128/s_isnanl.c: New file.
	* sysdeps/ieee754/ldbl-64-128/s_llrintl.c: New file.
	* sysdeps/ieee754/ldbl-64-128/s_llroundl.c: New file.
	* sysdeps/ieee754/ldbl-64-128/s_log1pl.c: New file.
	* sysdeps/ieee754/ldbl-64-128/s_logbl.c: New file.
	* sysdeps/ieee754/ldbl-64-128/s_lrintl.c: New file.
	* sysdeps/ieee754/ldbl-64-128/s_lroundl.c: New file.
	* sysdeps/ieee754/ldbl-64-128/s_modfl.c: New file.
	* sysdeps/ieee754/ldbl-64-128/s_nearbyintl.c: New file.
	* sysdeps/ieee754/ldbl-64-128/s_nextafterl.c: New file.
	* sysdeps/ieee754/ldbl-64-128/s_nexttoward.c: New file.
	* sysdeps/ieee754/ldbl-64-128/s_nexttowardf.c: New file.
	* sysdeps/ieee754/ldbl-64-128/s_nexttowardfd.c: New file.
	* sysdeps/ieee754/ldbl-64-128/s_remquol.c: New file.
	* sysdeps/ieee754/ldbl-64-128/s_rintl.c: New file.
	* sysdeps/ieee754/ldbl-64-128/s_roundl.c: New file.
	* sysdeps/ieee754/ldbl-64-128/s_scalblnl.c: New file.
	* sysdeps/ieee754/ldbl-64-128/s_scalbnl.c: New file.
	* sysdeps/ieee754/ldbl-64-128/s_signbitl.c: New file.
	* sysdeps/ieee754/ldbl-64-128/s_sincosl.c: New file.
	* sysdeps/ieee754/ldbl-64-128/s_sinl.c: New file.
	* sysdeps/ieee754/ldbl-64-128/s_tanhl.c: New file.
	* sysdeps/ieee754/ldbl-64-128/s_tanl.c: New file.
	* sysdeps/ieee754/ldbl-64-128/s_truncl.c: New file.
	* sysdeps/ieee754/ldbl-64-128/strtold_l.c: New file.
	* sysdeps/ieee754/ldbl-64-128/w_expl.c: New file.
	* sysdeps/ieee754/ldbl-opt/configure.in: New file.
	* sysdeps/ieee754/ldbl-opt/configure: New file.
	* sysdeps/ieee754/ldbl-opt/Makefile: New file.
	* sysdeps/ieee754/ldbl-opt/Versions: New file.
	* sysdeps/ieee754/ldbl-opt/cabs.c: New file.
	* sysdeps/ieee754/ldbl-opt/cabsl.c: New file.
	* sysdeps/ieee754/ldbl-opt/carg.c: New file.
	* sysdeps/ieee754/ldbl-opt/cargl.c: New file.
	* sysdeps/ieee754/ldbl-opt/cimag.c: New file.
	* sysdeps/ieee754/ldbl-opt/cimagl.c: New file.
	* sysdeps/ieee754/ldbl-opt/conj.c: New file.
	* sysdeps/ieee754/ldbl-opt/conjl.c: New file.
	* sysdeps/ieee754/ldbl-opt/creal.c: New file.
	* sysdeps/ieee754/ldbl-opt/creall.c: New file.
	* sysdeps/ieee754/ldbl-opt/math_ldbl_opt.c: New file.
	* sysdeps/ieee754/ldbl-opt/math_ldbl_opt.h: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-acos.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-acosh.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-asin.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-asinh.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-asprintf.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-atan.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-atan2.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-atanh.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-cabs.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-cacos.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-cacosh.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-carg.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-casin.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-casinh.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-catan.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-catanh.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-cbrt.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-ccos.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-ccosh.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-ceil.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-cexp.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-cimag.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-clog.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-clog10.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-compat.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-compat.h: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-conj.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-copysign.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-cos.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-cosh.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-cpow.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-cproj.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-creal.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-csin.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-csinh.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-csqrt.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-ctan.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-ctanh.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-dprintf.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-drem.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-erf.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-erfc.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-exp.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-exp10.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-exp2.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-expm1.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-fabs.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-fdim.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-finite.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-floor.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-fma.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-fmax.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-fmin.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-fmod.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-fprintf.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-fprintf_chk.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-frexp.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-fscanf.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-fwprintf.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-fwprintf_chk.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-fwscanf.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-gamma.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-hypot.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-ilogb.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-iovfscanf.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-isinf.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-isnan.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-j0.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-j1.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-jn.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-ldexp.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-lgamma.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-lgamma_r.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-llrint.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-llround.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-log.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-log10.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-log1p.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-log2.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-logb.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-lrint.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-lround.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-modf.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-nan.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-nearbyint.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-nextafter.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-nexttoward.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-nexttowardf.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-obstack_printf.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-obstack_vprintf.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-pow.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-pow10.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-printf.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-printf_chk.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-printf_fp.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-printf_size.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-qecvt.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-qecvt_r.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-qfcvt.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-qfcvt_r.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-qgcvt.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-remainder.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-remquo.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-rint.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-round.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-scalb.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-scalbln.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-scalbn.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-scanf.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-signbit.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-significand.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-sin.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-sincos.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-sinh.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-snprintf.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-snprintf_chk.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-sprintf.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-sprintf_chk.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-sqrt.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-sscanf.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-strfmon.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-strfmon_l.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-strtold.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-strtold_l.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-strtoldint.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-swprintf.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-swprintf_chk.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-swscanf.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-syslog.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-syslog_chk.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-tan.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-tanh.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-tgamma.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-trunc.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-vasprintf.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-vdprintf.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-vfprintf.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-vfprintf_chk.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-vfscanf.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-vfwprintf.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-vfwprintf_chk.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-vfwscanf.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-vprintf.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-vprintf_chk.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-vscanf.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-vsnprintf.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-vsnprintf_chk.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-vsprintf.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-vsprintf_chk.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-vsscanf.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-vswprintf.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-vswprintf_chk.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-vswscanf.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-vsyslog.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-vsyslog_chk.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-vwprintf.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-vwprintf_chk.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-vwscanf.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-wcstold.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-wcstold_l.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-wcstoldint.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-wprintf.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-wprintf_chk.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-wscanf.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-y0.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-y1.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-yn.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_asinh.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_atan.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_cacos.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_cacosh.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_cacoshl.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_cacosl.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_casin.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_casinh.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_casinhl.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_casinl.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_catan.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_catanh.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_catanhl.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_catanl.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_cbrt.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_ccos.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_ccosh.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_ccoshl.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_ccosl.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_ceil.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_cexp.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_cexpl.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_clog.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_clog10.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_clog10l.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_clogl.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_copysign.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_cpow.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_cpowl.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_cproj.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_cprojl.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_csin.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_csinh.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_csinhl.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_csinl.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_csqrt.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_csqrtl.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_ctan.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_ctanh.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_ctanhl.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_ctanl.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_erf.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_expm1.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_fabs.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_fdim.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_fdiml.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_finite.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_floor.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_fma.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_fmal.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_fmax.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_fmaxl.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_fmin.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_fminl.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_frexp.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_ilogb.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_isinf.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_isnan.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_ldexp.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_ldexpl.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_llrint.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_llround.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_log1p.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_logb.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_lrint.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_lround.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_modf.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_nan.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_nanl.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_nearbyint.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_nextafter.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_remquo.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_rint.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_round.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_scalbln.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_scalbn.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_significand.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_significandl.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_sin.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_sincos.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_tan.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_tanh.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_trunc.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_acos.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_acosh.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_acoshl.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_acosl.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_asin.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_asinl.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_atan2.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_atan2l.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_atanh.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_atanhl.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_cosh.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_coshl.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_drem.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_dreml.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_exp.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_exp10.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_exp10l.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_fmod.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_fmodl.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_hypot.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_hypotl.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_j0.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_j0l.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_j1.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_j1l.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_jn.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_jnl.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_lgamma.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_lgamma_r.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_lgammal.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_lgammal_r.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_log.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_log10.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_log10l.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_log2.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_log2l.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_logl.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_pow.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_powl.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_remainder.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_remainderl.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_scalb.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_scalbl.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_sinh.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_sinhl.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_sqrt.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_sqrtl.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_tgamma.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_tgammal.c: New file.

	* sysdeps/unix/sysv/linux/sparc/bits/wordsize.h: New file.
	* sysdeps/unix/sysv/linux/sparc/sparc32/Implies: New file.
	* sysdeps/sparc/sparc32/Implies: Move ldbl-128 first and flt-32
	after dbl-64.
	* sysdeps/unix/sysv/linux/sparc/sparc32/Versions (NLDBL_VERSION):
	%define this to to GLIBC_2.4.
	* sysdeps/sparc/sparc32/fpu/e_sqrtl.c: New file.
	* sysdeps/sparc/sparc32/fpu/s_fabs.c: New file.
	* sysdeps/sparc/sparc32/fpu/s_fabsf.S: New file.
	* sysdeps/sparc/sparc32/fpu/s_fabsl.c: New file.
	* sysdeps/sparc/sparc32/soft-fp/q_qtoui.c: Removed.
	* sysdeps/sparc/sparc32/soft-fp/q_qtoux.c: Removed.
	* sysdeps/sparc/sparc32/soft-fp/q_qtox.c: Removed.
	* sysdeps/sparc/sparc32/soft-fp/q_uitoq.c: Removed.
	* sysdeps/sparc/sparc32/soft-fp/q_uxtoq.c: Removed.
	* sysdeps/sparc/sparc32/soft-fp/q_xtoq.c: Removed.
	* sysdeps/sparc/sparc32/soft-fp/q_lltoq.c: New file.
	* sysdeps/sparc/sparc32/soft-fp/q_qtoll.c: New file.
	* sysdeps/sparc/sparc32/soft-fp/q_qtou.c: New file.
	* sysdeps/sparc/sparc32/soft-fp/q_qtoull.c: New file.
	* sysdeps/sparc/sparc32/soft-fp/q_ulltoq.c: New file.
	* sysdeps/sparc/sparc32/soft-fp/q_utoq.c: New file.
	* sysdeps/sparc/sparc32/soft-fp/Versions: New file.
	* sysdeps/sparc/fpu/bits/mathinline.h (__unordered_cmp,
	__unordered_v9cmp): Define differently depending on
	-m32 -mlong-double-{64,128}.
	(__signbitl, sqrtl, __ieee754_sqrtl): New inlines.
	* sysdeps/sparc/fpu/bits/mathdef.h (__NO_LONG_DOUBLE_MATH): Remove.
	* sysdeps/sparc/sparc32/soft-fp/Makefile (sparc32-quad-routines):
	Set.
	(sysdep-routines): Add sparc32-quad-routines.
	* sysdeps/sparc/sparc32/soft-fp/sfp-machine.h: Include stdlib.h.
	(FP_HANDLE_EXCEPTIONS): Call ___Q_simulate_exceptions as a normal
	function.
	* sysdeps/sparc/sparc32/soft-fp/q_sqrt.c (__ieee754_sqrtl): New
	alias to _Q_sqrt.
	* sysdeps/sparc/sparc32/soft-fp/q_div.c (_Q_div): Fix a typo.
	* sysdeps/sparc/sparc64/soft-fp/sfp-machine.h: Include stdlib.h.
	* sysdeps/sparc/sparc32/fpu/libm-test-ulps: Update.

	* libio/libio.h (_IO_vfscanf, _IO_vfprintf): Remove __THROW.
	(_IO_vfwscanf, _IO_vfwprintf): Likewise.
	* libio/libioP.h (_IO_vdprintf): Likewise.
2006-01-14 12:10:44 +00:00
Ulrich Drepper
a334319f65 (CFLAGS-tst-align.c): Add -mpreferred-stack-boundary=4. 2004-12-22 20:10:10 +00:00
Jakub Jelinek
0ecb606cb6 2.5-18.1 2007-07-12 18:26:36 +00:00
Ulrich Drepper
c03c66ddb5 Update.
2004-12-06  Ulrich Drepper  <drepper@redhat.com>

	* libio/fileops.c (_IO_new_file_seekoff): Fix optimization of in-buffer
	seek.  Remove dead code.

2004-12-02  Jakub Jelinek  <jakub@redhat.com>

	* libio/Makefile (tests): Add bug-ungetc4.
	* libio/bug-ungetc4.c: New test.
2004-12-06 22:39:13 +00:00
Ulrich Drepper
51cd2fbfb8 Update.
2004-11-04  Jakub Jelinek  <jakub@redhat.com>

	* libio/fileops.c (_IO_new_file_seekoff): If mode is 0 and
	fp->_offset == _IO_pos_BAD, just call _IO_SYSSEEK (fp, 0, dir)
	and if successful set fp->_offset.
	* libio/Makefile (tests): Add bug-ungetc3.
	* libio/bug-ungetc3.c: New test.
2004-11-09 07:05:27 +00:00
Ulrich Drepper
b5cc329c4f 2004-10-15 Jakub Jelinek <jakub@redhat.com>
* elf/dl-minimal.c (__chk_fail): New.  Add rtld_hidden_def.
	* sysdeps/unix/sysv/linux/readonly-area.c: New file.
	* sysdeps/i386/i686/memmove.S (__memmove_chk): Add checking
	routine.
	* sysdeps/i386/i686/memcpy.S (__memcpy_chk): Likewise.
	* sysdeps/i386/i686/mempcpy.S (__mempcpy_chk): Likewise.
	* sysdeps/i386/i686/memset.S (__memset_chk): Likewise.
	* sysdeps/i386/i686/memmove-chk.S: New file.
	* sysdeps/i386/i686/memcpy-chk.S: Likewise.
	* sysdeps/i386/i686/mempcpy-chk.S: Likewise.
	* sysdeps/i386/i686/memset-chk.S: Likewise.
	* sysdeps/generic/strcat-chk.c (__strcat_chk): Don't __chk_fail
	if exactly fitting into buffer.
	* sysdeps/generic/strncat-chk.c (__strncat_chk): Likewise.
	* sysdeps/generic/readonly-area.c: New file.
	* sysdeps/generic/strncpy-chk.c (__strncpy_chk): Only test
	destlen once.
	* sysdeps/x86_64/memset.S (__memset_chk): Add checking routine.
	* sysdeps/x86_64/memcpy.S (__memcpy_chk): Likewise.
	* sysdeps/x86_64/mempcpy.S (__memcpy_chk): Define to __mempcpy_chk.
	* sysdeps/x86_64/memcpy-chk.S: New file.
	* sysdeps/x86_64/mempcpy-chk.S: Likewise.
	* sysdeps/x86_64/memset-chk.S: Likewise.
	* sysdeps/x86_64/strcpy-chk.S: Likewise.
	* sysdeps/x86_64/stpcpy-chk.S: Likewise.
	* argp/argp-xinl.c (__OPTIMIZE__): Define to 1 instead of nothing.
	* argp/argp-fs-xinl.c (__OPTIMIZE__): Likewise.
	* debug/tst-chk1.c: New test.
	* debug/tst-chk2.c: Likewise.
	* debug/tst-chk3.c: Likewise.
	* debug/test-strcpy_chk.c: Likewise.
	* debug/test-stpcpy_chk.c: Likewise.
	* debug/vsprintf_chk.c (__vsprintf_chk): If flags > 0, request
	_IO_FLAGS2_CHECK_PERCENT_N.  Add libc_hidden_def.
	* debug/Makefile (routines): Add printf_chk, fprintf_chk, vprintf_chk,
	vfprintf_chk, gets_chk and readonly-area.
	(CFLAGS-*_chk.c): Set.
	(tests): Add tst-chk1, tst-chk2, tst-chk3, test-strcpy_chk and
	test-stpcpy_chk.
	* debug/vprintf_chk.c: New file.
	* debug/printf_chk.c: Likewise.
	* debug/vfprintf_chk.c: Likewise.
	* debug/fprintf_chk.c: Likewise.
	* debug/gets_chk.c: Likewise.
	* debug/chk_fail.c (__chk_fail): Add libc_hidden_def.
	* debug/snprintf_chk.c (__snprintf_chk): Fix order of arguments
	passed to __vsnprintf_chk.
	* debug/Versions (libc): Export __printf_chk, __fprintf_chk,
	__vprintf_chk, __vfprintf_chk and __gets_chk @GLIBC_2.3.4.
	* debug/vsnprintf_chk.c (__vsnprintf_chk): Don't call
	__vsnprintf, instead create a temporary file with
	_IO_strn_jumps jumptable.  If flags > 0, request
	_IO_FLAGS2_CHECK_PERCENT_N.  Add libc_hidden_def.
	* libio/Makefile (headers): Add bits/stdio2.h.
	* libio/stdio.h: Include <bits/stdio2.h> if __USE_FORTIFY_LEVEL.
	(sprintf, snprintf, vsprintf, vsnprintf): Remove defines.
	* libio/strfile.h (_IO_strnfile): New type.
	(_IO_strn_jumps): New extern.
	* libio/vsnprintf.c (_IO_strnfile): Remove.
	(_IO_strn_jumps): Remove static.
	* libio/bits/stdio2.h: New file.
	* libio/vswprintf.c (_IO_strnfile): Rename type to...
	(_IO_wstrnfile): ...this.  Adjust all uses.
	* libio/libio.h (_IO_FLAGS2_CHECK_PERCENT_N): Define.
	* stdio-common/vfprintf.c (STR_LEN): Define.
	(vfprintf): Add readonly_format variable.
	Handle _IO_FLAGS2_CHECK_PERCENT_N.
	(buffered_vfprintf): Copy _flags2.
	* include/stdio.h (__sprintf_chk, __snprintf_chk, __vsprintf_chk,
	__vsnprintf_chk, __printf_chk, __fprintf_chk, __vprintf_chk,
	__vfprintf_chk): New prototypes.
	(__vsprintf_chk, __vsnprintf_chk): Add libc_hidden_proto.
	* include/string.h (__memcpy_chk, __memmove_chk, __mempcpy_chk,
	__memset_chk, __strcpy_chk, __stpcpy_chk, __strncpy_chk, __strcat_chk,
	__strncat_chk): New prototypes.
	* include/bits/string3.h: New file.
	* include/sys/cdefs.h (__chk_fail): Add libc_hidden_proto
	and rtld_hidden_proto.
	* string/Makefile (headers): Add bits/string3.h.
	* string/bits/string3.h (bcopy, bzero): New defines.
	(memset, memcpy, memmove, strcpy, strncpy, strcat, strncat): Change
	macros so that inlines are used only if unknown destination size
	or side-effects in destination argument.
	(mempcpy, stpcpy): Likewise.  Protect with #ifdef __USE_GNU.

2004-09-16  Ulrich Drepper  <drepper@redhat.com>

	* debug/Makefile (routines): Add *_chk.
	* debug/Versions (libc): Export __chk_fail, __memcpy_chk,
	__memmove_chk, __mempcpy_chk, __memset_chk, __stpcpy_chk,
	__strcat_chk, __strcpy_chk, __strncat_chk, __strncpy_chk,
	__sprintf_chk, __vsprintf_chk, __snprintf_chk, __vsnprintf_chk
	@GLIBC_2.3.4.
	* debug/chk_fail.c: New file.
	* debug/snprintf_chk.c: Likewise.
	* debug/sprintf_chk.c: Likewise.
	* debug/vsnprintf_chk.c: Likewise.
	* debug/vsprintf_chk.c: Likewise.
	* include/features.h (_FORTIFY_SOURCE): Document, handle.
	(__USE_FORTIFY_LEVEL): Define.
	(__GNUC_PREREQ): Move to earlier location.
	* include/sys/cdefs.h (__chk_fail): New prototype.
	* libio/bits/stdio.h (sprintf, vsprintf, snprintf, vsnprintf):
	Define if __USE_FORTIFY_LEVEL.
	* misc/sys/cdefs.h (__bos, __bos0): Define.
	* string/string.h: Include <bits/string3.h> if __USE_FORTIFY_LEVEL.
	* bits/string/string3.h: New header.
	* sysdeps/generic/memcpy_chk.c: New file.
	* sysdeps/generic/memmove_chk.c: Likewise.
	* sysdeps/generic/mempcpy_chk.c: Likewise.
	* sysdeps/generic/memset_chk.c: Likewise.
	* sysdeps/generic/stpcpy_chk.c: Likewise.
	* sysdeps/generic/strcat_chk.c: Likewise.
	* sysdeps/generic/strcpy_chk.c: Likewise.
	* sysdeps/generic/strncat_chk.c: Likewise.
	* sysdeps/generic/strncpy_chk.c: Likewise.
2004-10-15  Jakub Jelinek  <jakub@redhat.com>

	* elf/dl-minimal.c (__chk_fail): New.  Add rtld_hidden_def.
	* sysdeps/unix/sysv/linux/readonly-area.c: New file.
	* sysdeps/i386/i686/memmove.S (__memmove_chk): Add checking
	routine.
	* sysdeps/i386/i686/memcpy.S (__memcpy_chk): Likewise.
	* sysdeps/i386/i686/mempcpy.S (__mempcpy_chk): Likewise.
	* sysdeps/i386/i686/memset.S (__memset_chk): Likewise.
	* sysdeps/i386/i686/memmove-chk.S: New file.
	* sysdeps/i386/i686/memcpy-chk.S: Likewise.
	* sysdeps/i386/i686/mempcpy-chk.S: Likewise.
	* sysdeps/i386/i686/memset-chk.S: Likewise.
	* sysdeps/generic/strcat-chk.c (__strcat_chk): Don't __chk_fail
	if exactly fitting into buffer.
	* sysdeps/generic/strncat-chk.c (__strncat_chk): Likewise.
	* sysdeps/generic/readonly-area.c: New file.
	* sysdeps/generic/strncpy-chk.c (__strncpy_chk): Only test
	destlen once.
	* sysdeps/x86_64/memset.S (__memset_chk): Add checking routine.
	* sysdeps/x86_64/memcpy.S (__memcpy_chk): Likewise.
	* sysdeps/x86_64/mempcpy.S (__memcpy_chk): Define to __mempcpy_chk.
	* sysdeps/x86_64/memcpy-chk.S: New file.
	* sysdeps/x86_64/mempcpy-chk.S: Likewise.
	* sysdeps/x86_64/memset-chk.S: Likewise.
	* sysdeps/x86_64/strcpy-chk.S: Likewise.
	* sysdeps/x86_64/stpcpy-chk.S: Likewise.
	* argp/argp-xinl.c (__OPTIMIZE__): Define to 1 instead of nothing.
	* argp/argp-fs-xinl.c (__OPTIMIZE__): Likewise.
	* debug/tst-chk1.c: New test.
	* debug/tst-chk2.c: Likewise.
	* debug/tst-chk3.c: Likewise.
	* debug/test-strcpy_chk.c: Likewise.
	* debug/test-stpcpy_chk.c: Likewise.
	* debug/vsprintf_chk.c (__vsprintf_chk): If flags > 0, request
	_IO_FLAGS2_CHECK_PERCENT_N.  Add libc_hidden_def.
	* debug/Makefile (routines): Add printf_chk, fprintf_chk, vprintf_chk,
	vfprintf_chk, gets_chk and readonly-area.
	(CFLAGS-*_chk.c): Set.
	(tests): Add tst-chk1, tst-chk2, tst-chk3, test-strcpy_chk and
	test-stpcpy_chk.
	* debug/vprintf_chk.c: New file.
	* debug/printf_chk.c: Likewise.
	* debug/vfprintf_chk.c: Likewise.
	* debug/fprintf_chk.c: Likewise.
	* debug/gets_chk.c: Likewise.
	* debug/chk_fail.c (__chk_fail): Add libc_hidden_def.
	* debug/snprintf_chk.c (__snprintf_chk): Fix order of arguments
	passed to __vsnprintf_chk.
	* debug/Versions (libc): Export __printf_chk, __fprintf_chk,
	__vprintf_chk, __vfprintf_chk and __gets_chk @GLIBC_2.3.4.
	* debug/vsnprintf_chk.c (__vsnprintf_chk): Don't call
	__vsnprintf, instead create a temporary file with
	_IO_strn_jumps jumptable.  If flags > 0, request
	_IO_FLAGS2_CHECK_PERCENT_N.  Add libc_hidden_def.
	* libio/Makefile (headers): Add bits/stdio2.h.
	* libio/stdio.h: Include <bits/stdio2.h> if __USE_FORTIFY_LEVEL.
	(sprintf, snprintf, vsprintf, vsnprintf): Remove defines.
	* libio/strfile.h (_IO_strnfile): New type.
	(_IO_strn_jumps): New extern.
	* libio/vsnprintf.c (_IO_strnfile): Remove.
	(_IO_strn_jumps): Remove static.
	* libio/bits/stdio2.h: New file.
	* libio/vswprintf.c (_IO_strnfile): Rename type to...
	(_IO_wstrnfile): ...this.  Adjust all uses.
	* libio/libio.h (_IO_FLAGS2_CHECK_PERCENT_N): Define.
	* stdio-common/vfprintf.c (STR_LEN): Define.
	(vfprintf): Add readonly_format variable.
	Handle _IO_FLAGS2_CHECK_PERCENT_N.
	(buffered_vfprintf): Copy _flags2.
	* include/stdio.h (__sprintf_chk, __snprintf_chk, __vsprintf_chk,
	__vsnprintf_chk, __printf_chk, __fprintf_chk, __vprintf_chk,
	__vfprintf_chk): New prototypes.
	(__vsprintf_chk, __vsnprintf_chk): Add libc_hidden_proto.
	* include/string.h (__memcpy_chk, __memmove_chk, __mempcpy_chk,
	__memset_chk, __strcpy_chk, __stpcpy_chk, __strncpy_chk, __strcat_chk,
	__strncat_chk): New prototypes.
	* include/bits/string3.h: New file.
	* include/sys/cdefs.h (__chk_fail): Add libc_hidden_proto
	and rtld_hidden_proto.
	* string/Makefile (headers): Add bits/string3.h.
	* string/bits/string3.h (bcopy, bzero): New defines.
	(memset, memcpy, memmove, strcpy, strncpy, strcat, strncat): Change
	macros so that inlines are used only if unknown destination size
	or side-effects in destination argument.
	(mempcpy, stpcpy): Likewise.  Protect with #ifdef __USE_GNU.

2004-09-16  Ulrich Drepper  <drepper@redhat.com>

	* debug/Makefile (routines): Add *_chk.
	* debug/Versions (libc): Export __chk_fail, __memcpy_chk,
	__memmove_chk, __mempcpy_chk, __memset_chk, __stpcpy_chk,
	__strcat_chk, __strcpy_chk, __strncat_chk, __strncpy_chk,
	__sprintf_chk, __vsprintf_chk, __snprintf_chk, __vsnprintf_chk
	@GLIBC_2.3.4.
	* debug/chk_fail.c: New file.
	* debug/snprintf_chk.c: Likewise.
	* debug/sprintf_chk.c: Likewise.
	* debug/vsnprintf_chk.c: Likewise.
	* debug/vsprintf_chk.c: Likewise.
	* include/features.h (_FORTIFY_SOURCE): Document, handle.
	(__USE_FORTIFY_LEVEL): Define.
	(__GNUC_PREREQ): Move to earlier location.
	* include/sys/cdefs.h (__chk_fail): New prototype.
	* libio/bits/stdio.h (sprintf, vsprintf, snprintf, vsnprintf):
	Define if __USE_FORTIFY_LEVEL.
	* misc/sys/cdefs.h (__bos, __bos0): Define.
	* string/string.h: Include <bits/string3.h> if __USE_FORTIFY_LEVEL.
	* bits/string/string3.h: New header.
	* sysdeps/generic/memcpy_chk.c: New file.
	* sysdeps/generic/memmove_chk.c: Likewise.
	* sysdeps/generic/mempcpy_chk.c: Likewise.
	* sysdeps/generic/memset_chk.c: Likewise.
	* sysdeps/generic/stpcpy_chk.c: Likewise.
	* sysdeps/generic/strcat_chk.c: Likewise.
	* sysdeps/generic/strcpy_chk.c: Likewise.
	* sysdeps/generic/strncat_chk.c: Likewise.
	* sysdeps/generic/strncpy_chk.c: Likewise.
2004-10-18 04:17:19 +00:00
Ulrich Drepper
eb35b0972f Update.
* sysdeps/unix/sysv/linux/tcgetattr.c (__tcgetattr): Fill in c_ispeed
	and c_ospeed fields.
	* sysdeps/unix/sysv/linux/speed.c (cfsetospeed): Set c_ospeed field.
	(cfsetispeed): Set c_ispeed field.
	* sysdeps/unix/sysv/linux/tcsetattr.c (IBAUD0): Define unconditionally
	to match corresponding speed.c code.

2003-09-06  Ulrich Drepper  <drepper@redhat.com>

	* libio/wfileops.c (_IO_wfile_underflow): Mark beginning of the
	narrow character buffer.
	* libio/Makefile: Add rules to build and run bug-ftell.
	* libio/bug-ftell.c: New file.

	* stdio-common/vfprintf.c: Don't use the first grouping number twice.

	* stdio-common/vfscanf.c (vfscanf): Fix recognition of characters
	matching the decimal point and possibly leading the thousands
	separator.  This caused the recognition of thousands separators to
	always fail.

2003-09-05  Ulrich Drepper  <drepper@redhat.com>

	* libio/fileops.c (_IO_new_file_overflow): Handle switching to
	write mode from read in backup buffer.
	* libio/Makefile (tests): Add bug-ungetc2.
	* libio/bug-ungetc2.c: New file.

2003-09-05  Roland McGrath  <roland@redhat.com>

>>>>>>> 1.7905
	* sysdeps/unix/sysv/linux/linux_fsinfo.h: Define VXFS_SUPER_MAGIC.
2003-09-06 09:56:14 +00:00
Ulrich Drepper
f1c30c98b9 (CFLAGS-oldtmpfile.c): Add -fexceptions. 2003-09-02 07:14:15 +00:00
Ulrich Drepper
0261d33f87 Update.
2003-08-29  Jakub Jelinek  <jakub@redhat.com>

	* libio/Makefile: Compile fputc.c, fputwc.c, freopen64.c, freopen.c,
	fseek.c, fseeko64.c, fseeko.c, ftello64.c, ftello.c, fwide.c, getc.c,
	getchar.c, getwc.c, getwchar.c, iofclose.c, iofflush.c, iofgetpos64.c,
	iofgetpos.c, iofgets.c, iofgetws.c, iofputs.c, iofputws.c, iofread.c,
	iofsetpos64.c, iofsetpos.c, ioftell.c, iofwrite.c, iogetdelim.c,
	iogetline.c, iogets.c, iogetwline.c, ioputs.c, ioseekoff.c,
	ioseekpos.c, iosetbuffer.c, iosetvbuf.c, ioungetc.c, ioungetwc.c,
	oldfileops.c, oldiofclose.c, oldiofgetpos64.c, oldiofgetpos.c,
	oldiofsetpos64.c, oldiofsetpos.c, peekc.c, putc.c, putchar.c, putwc.c,
	putwchar.c and rewind.c with exceptions.
	* sysdeps/generic/bits/stdio-lock.h (_IO_acquire_lock,
	_IO_release_lock): Define.
	* libio/fileops.c (_IO_new_file_underflow): Use it.
	* libio/fputc.c (fputc): Likewise.
	* libio/fputwc.c (fputwc): Likewise.
	* libio/freopen64.c (freopen64):
	* libio/freopen.c (freopen): Likewise.
	* libio/fseek.c (fseek): Likewise.
	* libio/fseeko64.c (fseeko64): Likewise.
	* libio/fseeko.c (fseeko): Likewise.
	* libio/ftello64.c (ftello64): Likewise.
	* libio/ftello.c (ftello): Likewise.
	* libio/fwide.c (fwide): Likewise.
	* libio/getc.c (_IO_getc): Likewise.
	* libio/getchar.c (getchar): Likewise.
	* libio/getwc.c (_IO_getwc): Likewise.
	* libio/getwchar.c (getwchar): Likewise.
	* libio/iofclose.c (_IO_new_fclose):
	* libio/iofflush.c (_IO_fflush): Likewise.
	* libio/iofgetpos64.c (_IO_new_fgetpos64): Likewise.
	* libio/iofgetpos.c (_IO_new_fgetpos): Likewise.
	* libio/iofgets.c (_IO_fgets): Likewise.
	* libio/iofgetws.c (fgetws): Likewise.
	* libio/iofputs.c (_IO_fputs):
	* libio/iofputws.c (_IO_fputs): Likewise.
	* libio/iofread.c (_IO_fread): Likewise.
	* libio/iofsetpos64.c (_IO_new_fsetpos64): Likewise.
	* libio/iofsetpos.c (_IO_new_fsetpos): Likewise.
	* libio/ioftell.c (_IO_ftell): Likewise.
	* libio/iofwrite.c (_IO_fwrite): Likewise.
	* libio/iogetdelim.c (_IO_getdelim): Likewise.
	* libio/iogets.c (_IO_gets): Likewise.
	* libio/ioputs.c (_IO_puts): Likewise.
	* libio/ioseekoff.c (_IO_seekoff): Likewise.
	* libio/ioseekpos.c (_IO_seekpos): Likewise.
	* libio/iosetbuffer.c (_IO_setbuffer): Likewise.
	* libio/iosetvbuf.c (_IO_setvbuf): Likewise.
	* libio/ioungetc.c (_IO_ungetc): Likewise.
	* libio/ioungetwc.c (ungetwc): Likewise.
	* libio/oldiofclose.c (_IO_old_fclose): Likewise.
	* libio/oldiofgetpos64.c (_IO_old_fgetpos64): Likewise.
	* libio/oldiofgetpos.c (_IO_old_fgetpos): Likewise.
	* libio/oldiofsetpos64.c (_IO_old_fsetpos64): Likewise.
	* libio/oldiofsetpos.c (_IO_old_fsetpos): Likewise.
	* libio/peekc.c (_IO_peekc_locked): Likewise.
	* libio/putc.c (_IO_putc): Likewise.
	* libio/putchar.c (putchar): Likewise.
	* libio/putwc.c (putwc): Likewise.
	* libio/putwchar.c (putwchar): Likewise.
	* libio/rewind.c (rewind): Likewise.
	* libio/wfileops.c (_IO_wfile_underflow): Likewise.
2003-08-29 19:58:49 +00:00
Roland McGrath
369b849f1a * sysdeps/unix/sysv/linux/s390/s390-32/sysdep.h (INTERNAL_SYSCALL,
INTERNAL_SYSCALL_ERROR_P, INTERNAL_SYSCALL_ERRNO): New macros.
	(INLINE_SYSCALL): Use that.
	* sysdeps/unix/sysv/linux/s390/s390-64/sysdep.h (INTERNAL_SYSCALL,
	INTERNAL_SYSCALL_ERROR_P, INTERNAL_SYSCALL_ERRNO): New macros.
	(INLINE_SYSCALL): Use that.
	* sysdeps/unix/sysv/linux/x86_64/sysdep.h (INTERNAL_SYSCALL,
	INTERNAL_SYSCALL_ERROR_P, INTERNAL_SYSCALL_ERRNO): New macros.
	(INLINE_SYSCALL): Use that.
	* sysdeps/unix/sysv/linux/sparc/sparc32/sysdep.h: Include
	dl-sysdep.h.
	(SYSCALL_ERROR_HANDLER): Define RTLD_PRIVATE_ERRNO variant.
	(__INTERNAL_SYSCALL_STRING): Define.
	* sysdeps/unix/sysv/linux/sparc/sparc64/sysdep.h: Include
	dl-sysdep.h.
	(SYSCALL_ERROR_HANDLER): Define RTLD_PRIVATE_ERRNO variant.
	(__INTERNAL_SYSCALL_STRING): Define.
	* sysdeps/unix/sysv/linux/sparc/sysdep.h (INLINE_SYSCALL): Pass
	__SYSCALL_STRING to inline_syscall*.
	(INTERNAL_SYSCALL, INTERNAL_SYSCALL_ERROR_P, INTERNAL_SYSCALL_ERRNO):
	New macros.
	(inline_syscall0, inline_syscall1, inline_syscall2, inline_syscall3,
	inline_syscall4, inline_syscall5, inline_syscall6): Add string
	argument.

2002-10-24  Roland McGrath  <roland@redhat.com>

	* libio/bug-wfflush.c: New file.
	* libio/Makefile (tests): Add bug-wfflush.
2002-10-24 18:49:00 +00:00
Ulrich Drepper
b50f38778c Update.
2002-08-26  Ulrich Drepper  <drepper@redhat.com>

	* libio/Makefile (tests): Add bug-fopena+.
	* libio/bug-fopena+.c: New file.

	* stdio-common/tst-swprintf.c (main): Add casts to avoid warnings.

	* locale/xlocale.c: Fix the last change.  The variable still has
	to end in _data.
	* sysdeps/generic/bits/libc-tsd.h [!(USE_TLS && HAVE___THREAD)]
	(__libc_tsd_set): Add _data prefix to variable name.
2002-08-27 06:41:29 +00:00
Ulrich Drepper
442685a8ba Update.
2002-08-26  Ulrich Drepper  <drepper@redhat.com>

	* libio/wfileops.c (_IO_wfile_seekoff): Set fp->_offset after
	finding the read position [PR libc/4265].
	* libio/Makefile (tests): Add bug-rewind2.
	* libio/bug-rewind2.c: New file.
2002-08-26 08:08:50 +00:00
Roland McGrath
fc77d66abf * libio/fileops.c (_IO_file_seekoff_mmap): Leave read pointers at EOF
if seek would go past it.
	(mmap_remap_check): If file position is at or past EOF after check,
	leave read pointers at EOF and don't seek.

	* libio/tst-mmap-offend.c: New file.
	* libio/Makefile (tests): Add it.
2002-08-15 23:57:00 +00:00
Roland McGrath
acbee5f637 * libio/fileops.c (_IO_file_sync_mmap): New function.
(_IO_file_jumps_mmap): Use it.
	(_IO_file_underflow_mmap): Rewritten.  If after EOF or fflush,
	repeat the stat check and resize the mapped buffer as necessary.

2002-07-31  Roland McGrath  <roland@frob.com>

	* libio/fileops.c (decide_maybe_mmap): New static function.
	Code taken from libio/iofopen.c:__fopen_maybe_mmap to try to
	mmap the file contents.  Then switch the jump tables to the mmap
	tables if it worked, or the vanilla file tables if not.
	(_IO_file_underflow_maybe_mmap): New function.
	(_IO_file_seekoff_maybe_mmap): New function.
	(_IO_file_xsgetn_maybe_mmap): New function.
	(_IO_file_jumps_maybe_mmap): New variable, jump table using those.
	* libio/libioP.h: Declare those.
	* libio/wfileops.c (_IO_wfile_underflow_maybe_mmap): New function.
	(_IO_wfile_jumps_maybe_mmap): New variable, jump table using that.
	* libio/iofopen.c (__fopen_maybe_mmap): Don't try to mmap here.
	If the stream is read-only, set its jump tables to those new ones.
	* libio/iofdopen.c (_IO_new_fdopen) [_G_HAVE_MMAP]: Set the initial
	jump tables to the maybe_mmap ones, and don't call __fopen_maybe_mmap.
	We need the tables set before _IO_file_attach.

	* libio/tst-mmap-eofsync.c: New file.
	* libio/tst-mmap-fflushsync.c: New file.
	* libio/bug-mmap-fflush.c: New file.
	* libio/tst-mmap2-eofsync.c: New file.
	* libio/Makefile (tests): Add them.

	* libio/wfileops.c (_IO_wfile_underflow_mmap): Don't set EOF bit when
	_IO_file_underflow_mmap fails, it already set the appropriate bit.
2002-08-02 01:29:37 +00:00
Roland McGrath
b264e1d19a 2002-07-31 Jeff Bailey <jbailey@gnu.org>
* libio/stdio.h (sys_errlist, sys_nerr, _sys_errlist, _sys_nerr):
	Declarations moved to <bits/sys_errlist.h>.  Include that file.
        * libio/Makefile (headers): Add bits/sys_errlist.h to the list.
        * sysdeps/generic/bits/sys_errlist.h: New file.  This does *not*
        declare sys_errlist and sys_nerr.
        * sysdeps/unix/sysv/linux/bits/sys_errlist.h: New file.  Does
	provide declarations.
2002-07-31 23:30:24 +00:00
Ulrich Drepper
405550bf78 Update.
2002-07-24  Ulrich Drepper  <drepper@redhat.com>

	* locale/hashval.h: Make more self-containedby defining LONG_BITS.
	* locale/programs/simple-hash.c: Remove LONG_BITS definition.

	* locale/programs/locarchive.c (add_locale_to_archive): Correct
	test to detect duplicate locales.

	* libio/fileops.c (_IO_new_file_seekoff): Fail if relative
	position would be before beginning of file.
	(_IO_file_seekoff_mmap): Likewise.
	* libio/Makefile (tests): Add bug-fseek.
	* libio/bug-fseek.c: New file.

	* intl/explodename.c: Remove support for CEN-style locale variables.
	It was never used and shouldn't be since it's not portable.
	* intl/finddomain.c: Likewise.
	* intl/l10nflist.c: Likewise.
	* intl/loadinfo.h: Likewise.
	* locale/findlocale.c: Likewise.
2002-07-24 10:44:53 +00:00
Roland McGrath
0e94c2176b 2002-07-24 Roland McGrath <roland@frob.com>
* libio/Makefile (tests): Add bug-ungetc.
	* libio/bug-ungetc.c: New file.
2002-07-24 09:34:59 +00:00
Ulrich Drepper
706d1dee46 Update.
2002-07-15  Ulrich Drepper  <drepper@redhat.com>

	* libio/wfileops.c (_IO_wfile_seekoff): Reposition wide pointers
	and adjust state for seek position.  [PR libc/4070]
	* libio/Makefile (tests): Add bug-rewind.
	* libio/bug-rewind.c: New file.
2002-07-15 23:37:22 +00:00
Ulrich Drepper
81c64d407c Update.
2002-07-10  Ulrich Drepper  <drepper@redhat.com>
	* Versions.def [libpthread]: Add GLIBC_2.2.6.
	* posix/Versions [libc] (GLIBC_2.2.6): Add __nanosleep.

2002-07-06  Bruno Haible  <bruno@clisp.org>

	* sysdeps/unix/sysv/sysv4/bits/sigset.h (__NSSBITS): Correct value.
	* sysdeps/unix/sysv/linux/bits/statvfs.h (ST_NODIRATIME): Set to 2048.
2002-07-10 23:09:16 +00:00