This hides the inconsistent TCB state (missing robust mutex list) from
signal handlers.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Unicode 16.0.0 Support: Character encoding, character type info, and
transliteration tables are all updated to Unicode 16.0.0, using
the generator scripts contributed by Mike FABIAN (Red Hat).
Changes in CHARMAP and WIDTH:
Total added characters in newly generated CHARMAP: 5185
Total removed characters in newly generated WIDTH: 1
Total added characters in newly generated WIDTH: 170
The removed character from WIDTH is U+1171E AHOM CONSONANT SIGN MEDIAL RA.
It changed like this:
UnicodeData.txt 15.1.0: 1171E;AHOM CONSONANT SIGN MEDIAL RA;Mn;0;NSM;;;;;N;;;;;
UnicodeData.txt 16.0.0: 1171E;AHOM CONSONANT SIGN MEDIAL RA;Mc;0;L;;;;;N;;;;;
EastAsianWidth.txt 15.1.0: 1171D..1171F ; N # Mn [3] AHOM CONSONANT SIGN MEDIAL LA..AHOM CONSONANT SIGN MEDIAL LIGATING RA
EastAsianWidth.txt 16.0.0: 1171E ; N # Mc AHOM CONSONANT SIGN MEDIAL RA
I.e it changed from Mn (Mark Nonspacing) to Mc (Mark Spacing
combining). So it should now have width 1 instead of 0, therefore it
is OK that it was removed from WIDTH, characters not in WIDTH get
width 1 by default.
Nothing suspicious when browsing the list of the 170 added characters.
Changes in ctype:
alpha: Added 4452 characters in new ctype which were not in old ctype
combining: Added 51 characters in new ctype which were not in old ctype
combining_level3: Added 43 characters in new ctype which were not in old ctype
graph: Added 5185 characters in new ctype which were not in old ctype
lower: Added 25 characters in new ctype which were not in old ctype
print: Added 5185 characters in new ctype which were not in old ctype
punct: Missing 33 characters of old ctype in new ctype
punct: Added 766 characters in new ctype which were not in old ctype
tolower: Added 27 characters in new ctype which were not in old ctype
totitle: Added 27 characters in new ctype which were not in old ctype
toupper: Added 27 characters in new ctype which were not in old ctype
upper: Added 27 characters in new ctype which were not in old ctype
Nothing suspicous in the additions.
About the 33 characters removed from `punct`:
U+0363 - U+036F are identical in UnicodeData.txt. Difference in DerivedCoreProperties.txt:
DerivedCoreProperties.txt 15.1.0: not there.
DerivedCoreProperties.txt 16.0.0: 0363..036F ; Alphabetic # Mn [13] COMBINING LATIN SMALL LETTER A..COMBINING LATIN SMALL LETTER X
So that’s the reason why they are added to `alpha` and removed from `punct`.
Same for U+1DD3 - U+1DE6, they are identical in UnicodeData.txt but there is a difference in DerivedCoreProperties.txt:
DerivedCoreProperties.txt 15.1.0: 1DE7..1DF4 ; Alphabetic # Mn [14] COMBINING LATIN SMALL LETTER ALPHA..COMBINING LATIN SMALL LETTER U WITH DIAERESIS
DerivedCoreProperties.txt 16.0.0: 1DD3..1DF4 ; Alphabetic # Mn [34] COMBINING LATIN SMALL LETTER FLATTENED OPEN A ABOVE..COMBINING LATIN SMALL LETTER U WITH DIAERESIS
So they became `Alphabetic` and were thus added to `alpha` and removed from `punct`.
Resolves: BZ #32168
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This is not completely clear from the C standard (although there
is footnote number 289 in C11), but I assume that our implementation
works this way.
Reviewed-by: DJ Delorie <dj@redhat.com>
This was discussed on the hallway track at GNU Tools Cauldron
2024. There are concerns about stability of the big-endian
GCC backend, and Linux removed support for the only big-endian
ARC platform in commit dd7c7ab01a04d645b7e7baa8530bfd81e31a2202
("ARC: [plat-eznps]: Drop support for EZChip NPS platform").
In Linux 6.11, fstat and newfstatat are added back. To avoid the messy
usage of the fstat, newfstatat, and statx system calls, we will continue
using statx only in glibc, maintaining consistency with previous versions of
the LoongArch-specific glibc implementation.
Signed-off-by: caiyinyu <caiyinyu@loongson.cn>
Reviewed-by: Xi Ruoyao <xry111@xry111.site>
Suggested-by: Florian Weimer <fweimer@redhat.com>
Use the setresuid32 system call if it is available, prefering
it over setresuid. If both system calls exist, setresuid
is the 16-bit variant. This fixes a build failure on
sparcv9-linux-gnu.
Calling an extern function in a different translation unit before
self-relocation is brittle. The compiler may load the address
at an earlier point in _dl_start, before self-relocation. In
_dl_start_final, the call is behind a compiler barrier, so this
cannot happen.
This case is detected early in the elf/dl-version.c consistency
checks. (These checks could be disabled in the future to allow
the removal of symbol versioning from objects.)
Commit f0b2132b35 ("ld.so: Support moving versioned symbols between
sonames [BZ #24741]) removed another call to _dl_name_match_p. The
_dl_check_caller function no longer exists, and the remaining calls
to _dl_name_match_p happen under the loader lock. This means that
atomic accesses are no longer required for the l_libname list. This
supersedes commit 395be7c218 ("elf: Fix data race in _dl_name_match_p
[BZ #21349]").
With --enable-hardcoded-path-in-tests, $(test-program-prefix)
does not redirect to the built glibc, but we need to run
iconv (the program) against the built glibc even with
--enable-hardcoded-path-in-tests, as it is using the ABI
path for the dynamic linker (as an installed program).
Use $(run-program-prefix) instead.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
This operation can be simplified to use simpler multiply-round-convert
sequence, which uses fewer instructions and constants.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
Rearrange operations so MOV is not necessary in reduction or around
the special-case handler. Reduce memory access by using more indexed
MLAs in polynomial.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
log1pf is quite register-intensive - use fewer registers for the
polynomial, and make various changes to shorten dependency chains in
parent routines. There is now no spilling with GCC 14. Accuracy moves
around a little - comments adjusted accordingly but does not require
regen-ulps.
Use the helper in log1pf as well, instead of having separate
implementations. The more accurate polynomial means special-casing can
be simplified, and the shorter dependency chain avoids the usual dance
around v0, which is otherwise difficult.
There is a small duplication of vectors containing 1.0f (or 0x3f800000) -
GCC is not currently able to efficiently handle values which fit in FMOV
but not MOVI, and are reinterpreted to integer. There may be potential
for more optimisation if this is fixed.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
Reduce MOVPRFXs by using unpredicated (non-destructive) instructions
where possible. Similar to the recent change to AdvSIMD F32 logs,
adjust special-case arguments and bounds to allow for more optimal
register usage. For all 3 routines one MOVPRFX remains in the
reduction, which cannot be avoided as immediate AND and ASR are both
destructive.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
Reduce MOV and MOVPRFX by improving special-case handling. Use inline
helper to duplicate the entire computation between the special- and
non-special case branches, removing the contention for z0 between x
and the return value.
Also rearrange some MLAs and MLSs - by making the multiplicand the
destination we can avoid a MOVPRFX in several cases. Also change which
constants go in the vector used for lanewise ops - the last lane is no
longer wasted.
Spotted that shift was incorrect in exp2f and exp10f, w.r.t. to the
comment that explains it. Fixed - worst-case ULP for exp2f moves
around but it doesn't change significantly for either routine.
Worst-case error for coshf increases due to passing x to exp rather
than abs(x) - updated the comment, but does not require regen-ulps.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
It tests long names and ENAMETOOLONG handling, specifically
for readdir_r. This is a regression test for bug 14699,
bug 32124, and bug 32128.
Reviewed-by: DJ Delorie <dj@redhat.com>
It is not necessary to do the conversion at the getdents64
layer for readdir64_r. Doing it piecewise for readdir64
is slightly simpler and allows deleting __old_getdents64.
This fixes bug 32128 because readdir64_r handles the length
check correctly.
Reviewed-by: DJ Delorie <dj@redhat.com>
The tests check that O_EXCL is used properly, that 0600 is used
as the mode, that the characters used are as expected, and that
the distribution of names generated is reasonably random.
The tests run very slowly on some kernel versions, so make them
xtests.
Reviewed-by: DJ Delorie <dj@redhat.com>
Add tests of special cases for freopen that were omitted from the more
general tests of different modes and similar issues. The special
cases in the three tests here are logically unconnected, it was simply
convenient to put these tests in one patch.
* Test freopen with a NULL path to the new file, in a chroot. Rather
than asserting that this fails (logically, failure in this case is
an implementation detail; it's not required for freopen to rely on
/proc), verify that either it fails (without memory leaks) or that
it succeeds and behaves as expected on success. There is no check
for file descriptor leaks because the machinery for that also
depends on /proc, so can't be used in a chroot.
* Test that freopen and freopen64 are genuinely different in
configurations with 32-bit off_t by checking for an EFBIG trying to
write past 2GB in a file opened with freopen in such a configuration
but no error with 64-bit off_t or when opening with freopen64.
* Test freopen of stdin, stdout and stderr.
Tested for x86_64 and x86.
The test tst-strtod-underflow covers various edge cases close to the
underflow threshold for strtod (especially cases where underflow on
architectures with after-rounding tininess detection depends on the
rounding mode). Make it use the type-generic machinery, with
corresponding test inputs for each supported floating-point format, so
that other functions in the strtod family are tested for underflow
edge cases as well.
Tested for x86_64.
There is very little test coverage of inputs to strtod-family
functions that don't contain anything that can be parsed as a number
(one test of ".y" in tst-strtod2), and none that I can see of skipping
initial whitespace. Add some tests of these things to tst-strtod2.
Tested for x86_64.
Although there are some tests in tst-strtod2 and tst-strtod3 for the
end pointer provided by strtod when it doesn't parse the whole string,
they aren't very thorough. Add tests of more such cases to
tst-strtod2.
Tested for x86_64.
Some of the strtod tests use type-generic machinery in tst-strtod.h to
test the strto* functions for all floating types, while others only
test double even when the tests are in fact meaningful for all
floating types.
Convert tst-strtod2 and tst-strtod5 to use the type-generic machinery
so they test all floating types. I haven't tried to convert them to
use newer test interfaces in other ways, just made the changes
necessary to use the type-generic machinery.
Tested for x86_64.
Previously, the second occurrence of the xtests target
expected all xtests to run (as the result of specifying
$(xtests)), but these tests have not been run due to
the the first xtests target is set up for run-built-tests=no:
it only runs tests in $(xtests-special). Consequently,
xtests are reported as UNSUPPORTED with “make xcheck
run-built-tests=no”. The xtests were not built, either.
After this change always, xtests are built regardless
of the $(run-built-tests) variable (except for xtests listed
in $(tests-unsupported)). To fix the UNSUPPORTED issue,
introduce xtests-expected and use that manage test
expectations in the second xtests target.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Add new testcase elf/tst-startup-errno.c which tests that errno is set
to 0 at first ELF constructor execution and at the start of the
program's main function.
Tested for x86_64
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Add new file libio/tst-fclose-unopened2.c that tests whether fclose on an
unopened file returns EOF.
This test differs from tst-fclose-unopened.c by ensuring the file's buffer
is allocated prior to double-fclose. A comment in tst-fclose-unopened.c
now clarifies that it is testing a file with an unallocated buffer.
Calling fclose on unopened files normally causes a use-after-free bug,
however the standard streams are an exception since they are not
deallocated by fclose.
Tested for x86_64.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Usually, the second and subsequent - return EOF immediately
and do not contribute to the output, but this is not an error.
Reviewed-by: DJ Delorie <dj@redhat.com>
Check if any of the input files overlaps with the output file, and use
a temporary file in this case, so that the input is no clobbered
before it is read. This fixes bug 10460. It allows to use iconv
more easily as a functional replacement for GNU recode.
The updated output buffer management truncates the output file
if there is no input, fixing bug 32033.
Reviewed-by: DJ Delorie <dj@redhat.com>
In several converters, a __GCONV_ILLEGAL_INPUT result gets overwritten
with __GCONV_FULL_OUTPUT. As a result, iconv (the function) returns
E2BIG instead of EILSEQ. The iconv program does not see the original
EILSEQ failure, does not recognize the invalid input, and may
incorrectly exit successfully.
To address this, a new __flags bit is used to indicate a sticky input
error state. All __GCONV_ILLEGAL_INPUT results are replaced with a
function call that sets this new __GCONV_ENCOUNTERED_ILLEGAL_INPUT and
returns __GCONV_ILLEGAL_INPUT. The iconv program checks for
__GCONV_ENCOUNTERED_ILLEGAL_INPUT and overrides the exit status.
The converter changes introducing __gconv_mark_illegal_input are
mostly mechanical, except for the res variable initialization in
iconvdata/iso-2022-jp.c: this error gets overwritten with __GCONV_OK
and other results in the following code. If res ==
__GCONV_ILLEGAL_INPUT afterwards, STANDARD_TO_LOOP_ERR_HANDLER below
will handle it.
The __gconv_mark_illegal_input changes do not alter the errno value
set by the iconv function. This is simpler to implement than
reviewing each __GCONV_FULL_OUTPUT result and adjust it not to
override a previous __GCONV_ILLEGAL_INPUT result. Doing it that way
would also change some E2BIG errors in to EILSEQ errors, so it had to
be done conditionally (under a flag set by the iconv program only), to
avoid confusing buffer management in other applications.
Reviewed-by: DJ Delorie <dj@redhat.com>
The __is_last field was replaced with a bitmask in
commit 85830c4c46 in 2000,
and multiple bits are in use today.
Reviewed-by: DJ Delorie <dj@redhat.com>
On current systems, very large files are needed before
mmap becomes beneficial. Simplify the implementation.
This exposed that inptr was not initialized correctly in
process_fd. Handling multiple input files resulted in
EFAULT in read because a null pointer was passed. This
could be observed previously if an input file was not
mappable and was reported as bug 17703.
Reviewed-by: DJ Delorie <dj@redhat.com>
This enables vectorisation of C23 logp1, which is an alias for log1p.
There are no new tests or ulp entries because the new symbols are simply
aliases.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
A common use case of access () / faccessat () is checking for file
existence, not any specific access permissions. In that case, we can
avoid doing the file_check_access () RPC; whether the given path had
been successfully resolved to a file is all we need to know to answer.
This is prompted by GLib switching to use faccessat (F_OK) to implement
g_file_query_exists () for local files.
https://gitlab.gnome.org/GNOME/glib/-/merge_requests/4272
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-ID: <20240919101439.179663-1-bugaevc@gmail.com>
This patch adds new flag --glibctunables to the cross-test-ssh.sh script
to pass Glibc tunables to the system on which tests are executed.
The value to pass can be also provided via the GLIBC_TUNABLES environment
variable.
This works similar to the TIMEOUTFACTOR variable.
Sometimes it is useful to cross test glibc with some non-default tunable,
and a global environment variable is the easiest way to inject some
tunable value into most tests. With this patch using cross-test-ssh.sh
script becomes very similar to running a test natively on the local host
when using non-default tunable is important.
Reviewed-by: Arjun Shankar <arjun@redhat.com>
