TS 18661-1 defines macros for the width of integer types, intended for
use with the fromfp functions to convert from floating-point types to
integer types of any width, in any rounding mode and with control over
whether "inexact" is raised. Such macros are, of course, more
generally useful than just with those functions.
Those macros are added to <limits.h> and <stdint.h>. This patch adds
the <limits.h> macros to glibc's header, with the <stdint.h> ones
intended to be added in a separate patch (which would add to the NEWS
entry created by this patch). I've also added these macros to GCC's
headers for GCC 7, but definitions in glibc's <limits.h> are still
useful for older GCC, for non-GNU compilers and for when it's
_GNU_SOURCE rather than __STDC_WANT_IEC_60559_BFP_EXT__ that implies
the macros should be defined since the GCC header only considers
__STDC_WANT_IEC_60559_BFP_EXT__ (and for glibc systems, the
definitions in GCC's <stdint.h> will only be used with
-ffreestanding).
Tested for x86_64 and x86.
* include/limits.h: Define
__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
<bits/libc-header-start.h> instead of including <features.h>.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (CHAR_WIDTH): New macro.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (SCHAR_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (UCHAR_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (SHRT_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (USHRT_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (LONG_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (ULONG_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (LLONG_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (ULLONG_WIDTH): Likewise.
* manual/lang.texi (Width of Type): Document these macros.
* stdlib/tst-width.c: New file.
* stdlib/Makefile (tests): Add tst-width.
TS 18661-1 defines a type femode_t to represent the set of dynamic
floating-point control modes (such as the rounding mode and trap
enablement modes), and functions fegetmode and fesetmode to manipulate
those modes (without affecting other state such as the raised
exception flags) and a corresponding macro FE_DFL_MODE.
This patch series implements those interfaces for glibc. This first
patch adds the architecture-independent pieces, the x86 and x86_64
implementations, and the <bits/fenv.h> and ABI baseline updates for
all architectures so glibc keeps building and passing the ABI tests on
all architectures. Subsequent patches add the fegetmode and fesetmode
implementations for other architectures.
femode_t is generally an integer type - the same type as fenv_t, or as
the single element of fenv_t where fenv_t is a structure containing a
single integer (or the single relevant element, where it has elements
for both status and control registers) - except where architecture
properties or consistency with the fenv_t implementation indicate
otherwise. FE_DFL_MODE follows FE_DFL_ENV in whether it's a magic
pointer value (-1 cast to const femode_t *), a value that can be
distinguished from valid pointers by its high bits but otherwise
contains a representation of the desired register contents, or a
pointer to a constant variable (the powerpc case; __fe_dfl_mode is
added as an exported constant object, an alias to __fe_dfl_env).
Note that where architectures (that share a register between control
and status bits) gain definitions of new floating-point control or
status bits in future, the implementations of fesetmode for those
architectures may need updating (depending on whether the new bits are
control or status bits and what the implementation does with
previously unknown bits), just like existing implementations of
<fenv.h> functions that take care not to touch reserved bits may need
updating when the set of reserved bits changes. (As any new bits are
outside the scope of ISO C, that's just a quality-of-implementation
issue for supporting them, not a conformance issue.)
As with fenv_t, femode_t should properly include any software DFP
rounding mode (and for both fenv_t and femode_t I'd consider that
fragment of DFP support appropriate for inclusion in glibc even in the
absence of the rest of libdfp; hardware DFP rounding modes should
already be included if the definitions of which bits are status /
control bits are correct).
Tested for x86_64, x86, mips64 (hard float, and soft float to test the
fallback version), arm (hard float) and powerpc (hard float, soft
float and e500). Other architecture versions are untested.
* math/fegetmode.c: New file.
* math/fesetmode.c: Likewise.
* sysdeps/i386/fpu/fegetmode.c: Likewise.
* sysdeps/i386/fpu/fesetmode.c: Likewise.
* sysdeps/x86_64/fpu/fegetmode.c: Likewise.
* sysdeps/x86_64/fpu/fesetmode.c: Likewise.
* math/fenv.h: Update comment on inclusion of <bits/fenv.h>.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (fegetmode): New function
declaration.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (fesetmode): Likewise.
* bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New
typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/aarch64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/alpha/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/arm/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/hppa/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/ia64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/m68k/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/microblaze/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/mips/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/nios2/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/powerpc/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (__fe_dfl_mode): New variable
declaration.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/s390/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/sh/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/sparc/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/tile/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/x86/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* manual/arith.texi (FE_DFL_MODE): Document macro.
(fegetmode): Document function.
(fesetmode): Likewise.
* math/Versions (fegetmode): New libm symbol at version
GLIBC_2.25.
(fesetmode): Likewise.
* math/Makefile (libm-support): Add fegetmode and fesetmode.
(tests): Add test-femode and test-femode-traps.
* math/test-femode-traps.c: New file.
* math/test-femode.c: Likewise.
* sysdeps/powerpc/fpu/fenv_const.c (__fe_dfl_mode): Declare as
alias for __fe_dfl_env.
* sysdeps/powerpc/nofpu/fenv_const.c (__fe_dfl_mode): Likewise.
* sysdeps/powerpc/powerpc32/e500/nofpu/fenv_const.c
(__fe_dfl_mode): Likewise.
* sysdeps/powerpc/Versions (__fe_dfl_mode): New libm symbol at
version GLIBC_2.25.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
TS 18661-1 defines an fetestexceptflag function to test the exception
state saved in an fexcept_t object by fegetexceptflag.
This patch implements this function for glibc. Almost all
architectures save exception state in such a way that it can be
directly ANDed with exception flag bits, so rather than having lots of
fetestexceptflag implementations that all do the same thing, the math/
implementation is made to use this generic logic (which is also OK in
the fallback case where FE_ALL_EXCEPT is zero). The only architecture
that seems to need anything different is s390.
(fegetexceptflag and fesetexceptflag use abbreviated filenames
fgetexcptflg.c and fsetexcptflg.c. Because we are no longer concerned
by 14-character filename limits, fetestexceptflag uses the obvious
filename fetestexceptflag.c.)
The NEWS entry is intended to be expanded along the lines given in
<https://sourceware.org/ml/libc-alpha/2016-08/msg00356.html> when
fegetmode and fesetmode are added.
Tested for x86_64, x86, mips64 and powerpc.
* math/fetestexceptflag.c: New file.
* sysdeps/s390/fpu/fetestexceptflag.c: Likewise. Comment by
Stefan Liebler.
* math/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(fetestexceptflag): New function declaration.
* manual/arith.texi (fetestexceptflag): Document function.
* math/Versions (fetestexceptflag): New libm symbol at version
GLIBC_2.25.
* math/Makefile (libm-support): Add fetestexceptflag.
(tests): Add test-fetestexceptflag.
* math/test-fetestexceptflag.c: New file.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
TS 18661-1 defines an fesetexcept function for setting floating-point
exception flags without the side-effect of causing enabled traps to be
taken.
This patch series implements this function for glibc. The present
patch adds the fallback stub implementation, x86 and x86_64
implementations, documentation, tests and ABI baseline updates. The
remaining patches, some of them untested, add implementations for
other architectures. The implementations generally follow those of
the fesetexceptflag function.
As for fesetexceptflag, the approach taken for architectures where
setting flags causes enabled traps to be taken is to set the flags
(and potentially cause traps) rather than refusing to set the flags
and returning an error. Since ISO C and TS 18661 provide no way to
enable traps, this is formally in accordance with the standards.
The NEWS entry should be considered a placeholder, since this patch
series is intended to be followed by further such series adding other
TS 18661-1 features, so that the NEWS entry would end up looking more
like
* New <fenv.h> features from TS 18661-1:2014 are added to libm: the
fesetexcept, fetestexceptflag, fegetmode and fesetmode functions,
the femode_t type and the FE_DFL_MODE macro.
with hopefully more such entries for other features, rather than
having an entry for a single function in the end.
I believe we have consensus for adding TS 18661-1 interfaces as per
<https://sourceware.org/ml/libc-alpha/2016-06/msg00421.html>.
Tested for x86_64, x86, mips64 (hard float, and soft float to test the
fallback version), arm (hard float) and powerpc (hard float, soft
float and e500).
* math/fesetexcept.c: New file.
* sysdeps/i386/fpu/fesetexcept.c: Likewise.
* sysdeps/x86_64/fpu/fesetexcept.c: Likewise.
* math/fenv.h: Define
__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
<bits/libc-header-start.h> instead of including <features.h>.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (fesetexcept): New function
declaration.
* manual/arith.texi (fesetexcept): Document function.
* math/Versions (fesetexcept): New libm symbol at version
GLIBC_2.25.
* math/Makefile (libm-support): Add fesetexcept.
(tests): Add test-fesetexcept and test-fesetexcept-traps.
* math/test-fesetexcept.c: New file.
* math/test-fesetexcept-traps.c: Likewise.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
This patch implements support for the
__STDC_WANT_IEC_60559_FUNCS_EXT__ feature test macro, following the
__GLIBC_USE approach used for other ISO C feature test macros.
Currently this only affects the exp10 functions (which glibc has had
for a long time).
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* bits/libc-header-start.h (__GLIBC_USE_IEC_60559_FUNCS_EXT): New
macro.
* include/features.h (__STDC_WANT_IEC_60559_FUNCS_EXT__):
Document.
* manual/creature.texi (__STDC_WANT_IEC_60559_FUNCS_EXT__):
Document macro.
* manual/math.texi (exp10): Document as ISO from TS 18661-4:2015.
(exp10f): Likewise.
(exp10l): Likewise.
* math/bits/mathcalls.h (exp10): Declare if
[__GLIBC_USE (IEC_60559_FUNCS_EXT)], not [__USE_GNU].
This patch implements support for the __STDC_WANT_IEC_60559_BFP_EXT__
feature test macro from ISO/IEC 18661-1:2014, following the
__GLIBC_USE approach now used for __STDC_WANT_LIB_EXT2__. For this
macro, the relevant consideration is whether it is defined or
undefined when an affected header is included (not what its value is
if defined, and not whether it's defined or undefined when any other
unaffected system header is included).
Currently this macro only affects the issignaling macro and the nextup
and nextdown functions (so they can be enabled by defining this macro,
not just by defining _GNU_SOURCE as previously). Any further features
from this TS added in future would also be conditioned on this macro.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* bits/libc-header-start.h (__GLIBC_USE_IEC_60559_BFP_EXT): New
macro.
* include/features.h (__STDC_WANT_IEC_60559_BFP_EXT__): Document.
* manual/arith.texi (issignaling): Document as ISO from TS
18661-1:2014.
(nextup): Likewise.
(nextupf): Likewise.
(nextupl): Likewise.
(nextdown): Likewise.
(nextdownf): Likewise.
(nextdownl): Likewise.
* manual/creature.texi (__STDC_WANT_IEC_60559_BFP_EXT__): Document
macro.
* math/math.h: Define
__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
<bits/libc-header-start.h> instead of including <features.h>.
(issignaling): Define if [__GLIBC_USE (IEC_60559_BFP_EXT)], not
[__USE_GNU].
* math/bits/mathcalls.h (nextdown): Declare if
[__GLIBC_USE (IEC_60559_BFP_EXT)], not [__USE_GNU].
(nextup): Likewise.
(__issignaling): Likewise.
This patch implements support for the __STDC_WANT_LIB_EXT2__ feature
test macro from ISO/IEC TR 24731-2:2010, thereby implementing one
possible approach for supporting ISO C feature test macros.
Recall that, as described in
<https://sourceware.org/ml/libc-alpha/2016-05/msg00486.html>, these
macros work based on the definition when affected headers are
included, so cannot be handled once when the first system header is
included because that might not be one of the headers the particular
macro in question affects.
<https://sourceware.org/ml/libc-alpha/2016-05/msg00680.html> expresses
views on possible approaches for implementation and
<https://sourceware.org/ml/libc-alpha/2016-06/msg00039.html> follows
up on that.
This patch arranges things so that the relevant condition is
__GLIBC_USE (LIB_EXT2), following one of the suggestions given.
Headers using these macros include <bits/libc-header-start.h>, which
in turn includes <features.h>. Headers must define
__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION before including
<bits/libc-header-start.h>, to discourage inclusion outside glibc as
requested. __USE_GNU conditions on affected functions are changed to
__GLIBC_USE (LIB_EXT2), while it's added as an additional alternative
on the conditions for functions already enabled for some POSIX
versions.
It would be possible to convert existing __USE_* conditionals to
__GLIBC_USE (with the relevant __GLIBC_USE_* being defined in
<features.h> where __USE_* are presently defined), and so make them
typo-proof (given -Wundef -Werror in glibc builds) because __GLIBC_USE
is used with #if not #ifdef / #if defined.
No attempt is made to enforce the rule about diagnosing different
definitions of __STDC_WANT_LIB_EXT2__ when affected headers are
included; such a diagnostic is incompatible with multiple-include
guards on the affected headers, unless compiler extensions are added
to support it.
As previously noted, glibc does not implement all features from TR
24731-2:2010: the functions aswprintf vaswprintf getwdelim getwline
are not in glibc, although they would be appropriate to add if someone
wished to do so. But I think it makes sense to support the feature
test macro if *any* of the controlled features are present in glibc.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* bits/libc-header-start.h: New file.
* Makefile (headers): Add bits/libc-header-start.h.
* include/features.h (__STDC_WANT_LIB_EXT2__): Document.
(__GLIBC_USE): New macro.
* libio/stdio.h: Define
__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
<bits/libc-header-start.h> instead of including <features.h>.
(fmemopen): Declare also if [__GLIBC_USE (LIB_EXT2)].
(open_memstream): Likewise.
(vasprintf): Declare if [__GLIBC_USE (LIB_EXT2)], not [__USE_GNU].
(__asprintf): Likewise.
(asprintf): Likewise.
(__getdelim): Declare also if [__GLIBC_USE (LIB_EXT2)].
(getdelim): Likewise.
(getline): Likewise.
* string/string.h: Define
__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
<bits/libc-header-start.h> instead of including <features.h>.
(strdup): Declare also if [__GLIBC_USE (LIB_EXT2)]
(strndup): Likewise.
* wcsmbs/wchar.h: Define
__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
<bits/libc-header-start.h> instead of including <features.h>.
(open_wmemstream): Declare also if [__GLIBC_USE (LIB_EXT2)].
* manual/creature.texi (__STDC_WANT_LIB_EXT2__): Document macro.
TS 18661 adds nextup and nextdown functions alongside nextafter to provide
support for float128 equivalent to it. This patch adds nextupl, nextup,
nextupf, nextdownl, nextdown and nextdownf to libm before float128 support.
The nextup functions return the next representable value in the direction of
positive infinity and the nextdown functions return the next representable
value in the direction of negative infinity. These are currently enabled
as GNU extensions.
__malloc_initialize_hook is interposed by application code, so
the usual approach to define a compatibility symbol does not work.
This commit adds a new mechanism based on #pragma GCC poison in
<stdc-predef.h>.
https://sourceware.org/glibc/wiki/Proposals/GroupMerging
== Justification ==
It is common today for users to rely on centrally-managed user stores for
handling their user accounts. However, much software existing today does
not have an innate understanding of such accounts. Instead, they commonly
rely on membership in known groups for managing access-control (for
example the "wheel" group on Fedora and RHEL systems or the "adm" group
on Debian-derived systems). In the present incarnation of nsswitch, the
only way to have such groups managed by a remote user store such as
FreeIPA or Active Directory would be to manually remove the groups from
/etc/group on the clients so that nsswitch would then move past nss_files
and into the SSSD, nss-ldap or other remote user database.
== Solution ==
With this patch, a new action is introduced for nsswitch:
NSS_ACTION_MERGE. To take advantage of it, one will add [SUCCESS=merge]
between two database entries in the nsswitch.conf file. When a group is
located in the first of the two group entries, processing will continue
on to the next one. If the group is also found in the next entry (and the
group name and GID are an exact match), the member list of the second
entry will be added to the group object to be returned.
== Implementation ==
After each DL_LOOKUP_FN() returns, the next action is checked. If the
function returned NSS_STATUS_SUCCESS and the next action is
NSS_ACTION_MERGE, a copy of the result buffer is saved for the next pass
through the loop. If on this next pass through the loop the database
returns another instance of a group matching both the group name and GID,
the member list is added to the previous list and it is returned as a
single object. If the following database does not contain the same group,
then the original is copied back into the destination buffer.
This patch implements merge functionality only for the group database.
For other databases, there is a default implementation that will return
the EINVAL errno if a merge is requested. The merge functionality can be
implemented for other databases at a later time if such is needed. Each
database must provide a unique implementation of the deep-copy and merge
functions.
If [SUCCESS=merge] is present in nsswitch.conf for a glibc version that
does not support it, glibc will process results up until that operation,
at which time it will return results if it has found them or else will
simply return an error. In practical terms, this ends up behaving like
the remainder of the nsswitch.conf line does not exist.
== Iterators ==
This feature does not modify the iterator functionality from its current
behavior. If getgrnam() or getgrgid() is called, glibc will iterate
through all entries in the `group` line in nsswitch.conf and display the
list of members without attempting to merge them. This is consistent with
the behavior of nss_files where if two separate lines are specified for
the same group in /etc/groups, getgrnam()/getgrgid() will display both.
Clients are already expected to handle this gracefully.
== No Premature Optimizations ==
The following is a list of places that might be eligible for
optimization, but were not overengineered for this initial contribution:
* Any situation where a merge may occur will result in one malloc() of
the same size as the input buffer.
* Any situation where a merge does occur will result in a second
malloc() to hold the list of pointers to member name strings.
* The list of members is simply concatenated together and is not tested
for uniqueness (which is identical to the behavior for nss_files,
which will simply return identical values if they both exist on the
line in the file. This could potentially be optimized to reduce space
usage in the buffer, but it is both complex and computationally
expensive to do so.
== Testing ==
I performed testing by running the getent utility against my newly-built
glibc and configuring /etc/nsswitch.conf with the following entry:
group: group: files [SUCCESS=merge] sss
In /etc/group I included the line:
wheel❌10:sgallagh
I then configured my local SSSD using the id_provider=local to respond
with:
wheel:*:10:localuser,localuser2
I then ran `getent group wheel` against the newly-built glibc in
multiple situations and received the expected output as described
above:
* When SSSD was running.
* When SSSD was configured in nsswitch.conf but the daemon was not
running.
* When SSSD was configured in nsswitch.conf but nss_sss.so.2 was not
installed on the system.
* When the order of 'sss' and 'files' was reversed.
* All of the above with the [SUCCESS=merge] removed (to ensure no
regressions).
* All of the above with `getent group 10`.
* All of the above with `getent group` with and without
`enumerate=true` set in SSSD.
* All of the above with and without nscd enabled on the system.
Previously, application code had to set up the d_namlen member if
the target supported it, involving conditional compilation. After
this change, glob will use the length of the string in d_name instead
of d_namlen to determine the file name length. All glibc targets
provide the d_type and d_ino members, and setting them as needed for
gl_readdir is straightforward.
Changing the behavior with regards to d_ino is left to a future
cleanup.
Previously, a thread M invoking fork would acquire locks in this order:
(M1) malloc arena locks (in the registered fork handler)
(M2) libio list lock
A thread F invoking flush (NULL) would acquire locks in this order:
(F1) libio list lock
(F2) individual _IO_FILE locks
A thread G running getdelim would use this order:
(G1) _IO_FILE lock
(G2) malloc arena lock
After executing (M1), (F1), (G1), none of the threads can make progress.
This commit changes the fork lock order to:
(M'1) libio list lock
(M'2) malloc arena locks
It explicitly encodes the lock order in the implementations of fork,
and does not rely on the registration order, thus avoiding the deadlock.
The overloading approach in the W* macros was incompatible with
integer expressions of a type different from int. Applications
using union wait and these macros will have to migrate to the
POSIX-specified int status type.
A large number of the test-ldouble failures seen for ldbl-128ibm are
spurious "underflow" and "inexact" exceptions. These arise from such
exceptions in the underlying arithmetic; unlike other spurious
exceptions from that arithmetic, they do not in general relate to
cases where the returned result is also substantially inaccurate, are
not so readily avoidable by appropriately conditional libgcc patches,
and are widespread enough to be hard to handle through individual
XFAILing of the affected tests.
Thus, this patch documents relaxed accuracy goals for libm functions
for IBM long double and makes libm-test.inc reflect these spurious
exceptions in ldbl-128ibm arithmetic and always allow them in
ldbl-128ibm testing (while still not allowing these exceptions to be
missing where required to be present). Tested for powerpc.
* manual/math.texi (Errors in Math Functions): Document relaxed
accuracy goals for IBM long double.
* math/libm-test.inc (test_exceptions): Always allow spurious
"underflow" and "inexact" exceptions for IBM long double.
In <https://sourceware.org/ml/libc-alpha/2016-01/msg00885.html> I
proposed a minimum Linux kernel version of 3.2 for glibc 2.24, since
Linux 2.6.32 has reached EOL.
In the discussion in February, some concerns were expressed about
compatibility with OpenVZ containers. It's not clear that these are
real issues, given OpenVZ backporting kernel features and faking the
kernel version for guest software, as discussed in
<https://sourceware.org/ml/libc-alpha/2016-02/msg00278.html>. It's
also not clear that supporting running GNU/Linux distributions from
late 2016 (at the earliest) on a kernel series from 2009 is a sensible
expectation. However, as an interim step, this patch increases the
requirement everywhere except x86 / x86_64 (since the controversy was
only about those architectures); the special caveats and settings can
easily be removed later when we're ready to increase the requirements
on x86 / x86_64 (and if someone would like to raise the issue on LWN
as suggested in the previous discussion, that would be welcome). 3.2
kernel headers are required everywhere by this patch.
(x32 already requires 3.4 or later, so is unaffected by this patch.)
As usual for such a change, this patch only changes the configure
scripts and associated documentation. The intent is to follow up with
removal of dead __LINUX_KERNEL_VERSION conditionals. Each __ASSUME_*
or other macro that becomes dead can then be removed independently.
Tested for x86_64 and x86.
* sysdeps/unix/sysv/linux/configure.ac (LIBC_LINUX_VERSION):
Define to 3.2.0.
(arch_minimum_kernel): Likewise.
* sysdeps/unix/sysv/linux/configure: Regenerated.
* sysdeps/unix/sysv/linux/i386/configure.ac (arch_minimum_kernel):
Define to 2.6.32.
* sysdeps/unix/sysv/linux/i386/configure: Regenerated.
* sysdeps/unix/sysv/linux/x86_64/64/configure.ac
(arch_minimum_kernel): Define to 2.6.32.
* sysdeps/unix/sysv/linux/x86_64/64/configure: Regenerated.
* README: Document Linux 3.2 requirement.
* manual/install.texi (Linux): Document Linux 3.2 headers
requirement.
* INSTALL: Regenerated.
This patch updates texinfo.tex, config.guess, config.sub and
move-if-change from their respective upstream sources.
* manual/texinfo.tex: Update to version 2016-01-04.21 with
trailing whitespace removed.
* scripts/config.guess: Update to version 2016-01-01.
* scripts/config.sub: Update to version 2016-01-01.
* scripts/move-if-change: Update from gnulib.
Various Linux kernel syscalls have become obsolete over time.
Specifically, the following are obsolete in all kernel versions
supported by glibc, are not present for architectures more recently
added to the kernel, and as such, the wrapper functions for them
should be compat symbols, not in static libc and not available for new
links with shared libc.
* bdflush: in Linux 2.6, does nothing if present.
* create_module get_kernel_syms query_module: Linux 2.4 module
interface, syscalls not present in Linux 2.6.
* uselib: part of the mechanism for loading a.out shared libraries,
irrelevant with ELF.
This patch adds support for syscalls.list to list syscall aliases of
the form NAME@VERSION:OBSOLETED, with SHLIB_COMPAT conditionals being
generated for such aliases. Those five syscalls are then made into
compat symbols (obsoleted in glibc 2.23, so future ports won't have
these symbols at all), with the header <sys/kdaemon.h> declaring
bdflush being removed. When we move to 3.2 as minimum kernel version,
the same can be done for nfsservctl (removed in Linux 3.1) as well.
Tested for x86_64 and x86 (testsuite, as well as checking that the
symbols in question indeed become compat symbols, that they are indeed
omitted from static libc, and that the generated SHLIB_COMPAT
conditionals look right).
[BZ #18472]
* sysdeps/unix/Makefile ($(objpfx)stub-syscalls.c): Handle entries
for the form NAME@VERSION:OBSOLETED and generate SHLIB_COMPAT
conditionals for them.
* sysdeps/unix/make-syscalls.sh (emit_weak_aliases): Likewise.
* sysdeps/unix/sysv/linux/sys/kdaemon.h: Remove file.
* sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Remove
sys/kdaemon.h.
* sysdeps/unix/sysv/linux/syscalls.list (bdflush): Make into
compat-only syscall, obsoleted in glibc 2.23.
(create_module): Likewise.
(get_kernel_syms): Likewise.
(query_module): Likewise.
(uselib): Likewise.
* manual/sysinfo.texi (System Parameters): Do not mention bdflush.
* manual/examples/strncat.c: Remove.
This example was misleading, as the code would have undefined
behavior if "hello" was longer than SIZE. Anyway, the manual
shouldn't encourage strncpy+strncat for this sort of thing.
* manual/string.texi (Copying Strings and Arrays): Split into
three sections Copying Strings and Arrays, Concatenating Strings,
and Truncating Strings, as this section was way too long. All
cross-referenced changed. Add advice about string-truncation
functions. Remove misleading strncat example.
NSS modules which can run in disconnected modes should
return NSS_STATUS_NOTFOUND and SUCCESS in order to follow
best practice for such modules and ensure user applications
can have these modules configured without causing problems
if the data sources are not connected.
* manual/string.texi (Copying and Concatenation): Fix typos in
sample implementations of strncat and wcsncat, by having them use
the old value of the destination length, not the new one.
* manual/string.texi (String and Array Utilities):
Distinguish more carefully among bytes, multibyte characters,
and wide characters. Use "byte" when talking about C 'char',
to distinguish it more clearly from multibyte characters.
Say "wide character" or "multibyte character" instead of
"character", when a wide or multibyte character is intended.
Similarly for "multibyte string" versus "string".
Define these terms more carefully.
With current kernel versions, the check does not reliably detect that
unavailable CPUs are requested, for these reasons:
(1) The kernel will silently ignore non-allowed CPUs, that is, CPUs
which are physically present but disallowed for the thread
based on system configuration.
(2) Similarly, CPU bits which lack an online CPU (possible CPUs)
are ignored.
(3) The existing probing code assumes that the CPU mask size is a
power of two and at least 1024. Neither has it to be a power
of two, nor is the minimum possible value 1024, so the value
determined is often too large. This means that the CPU set
size check in glibc accepts CPU bits beyond the actual hard
system limit.
(4) Future kernel versions may not even have a fixed CPU set size.
After the removal of the probing code, the kernel still returns
EINVAL if no CPU in the requested set remains which can run the
thread after the affinity change.
Applications which care about the exact affinity mask will have
to query it using sched_getaffinity after setting it. Due to the
effects described above, this commit does not change this.
The new tests supersede tst-getcpu, which is removed. This
addresses bug 19164 because the new tests allocate CPU sets
dynamically.
* nptl/check-cpuset.h: Remove.
* nptl/pthread_attr_setaffinity.c (__pthread_attr_setaffinity_new):
Remove CPU set size check.
* nptl/pthread_setattr_default_np.c (pthread_setattr_default_np):
Likewise.
* sysdeps/unix/sysv/linux/check-cpuset.h: Remove.
* sysdeps/unix/sysv/linux/pthread_setaffinity.c
(__kernel_cpumask_size, __determine_cpumask_size): Remove.
(__pthread_setaffinity_new): Remove CPU set size check.
* sysdeps/unix/sysv/linux/sched_setaffinity.c
(__kernel_cpumask_size): Remove.
(__sched_setaffinity_new): Remove CPU set size check.
* manual/threads.texi (Default Thread Attributes): Remove stale
reference to check_cpuset_attr, determine_cpumask_size in comment.
* sysdeps/unix/sysv/linux/Makefile [$(subdir) == posix] (tests):
Remove tst-getcpu. Add tst-affinity, tst-affinity-pid.
[$(subdir) == nptl] (tests): Add tst-thread-affinity-pthread,
tst-thread-affinity-pthread2, tst-thread-affinity-sched.
* sysdeps/unix/sysv/linux/tst-affinity.c: New file.
* sysdeps/unix/sysv/linux/tst-affinity-pid.c: New file.
* sysdeps/unix/sysv/linux/tst-skeleton-affinity.c: New skeleton test file.
* sysdeps/unix/sysv/linux/tst-thread-affinity-sched.c: New file.
* sysdeps/unix/sysv/linux/tst-thread-affinity-pthread.c: New file.
* sysdeps/unix/sysv/linux/tst-thread-affinity-pthread2.c: New file.
* sysdeps/unix/sysv/linux/tst-thread-skeleton-affinity.c: New
skeleton test file.
* sysdeps/unix/sysv/linux/tst-getcpu.c: Remove. Superseded by
tst-affinity-pid.
This patch implements a requirement of GCC 4.7 or later to build
glibc.
This was discussed in the thread starting at
<https://sourceware.org/ml/libc-alpha/2015-08/msg00851.html>.
Concerns were expressed by Mike and David. At
<https://sourceware.org/ml/libc-alpha/2015-10/msg00453.html> I have
provided a 14-patch series showing in outline the cleanups facilitated
by this version requirement, as requested by Mike (this patch is the
first in that series, with the addition of a NEWS entry). Given the
absence of further concerns or alternative proposals for criteria for
updates to this version requirement as requested in
<https://sourceware.org/ml/libc-alpha/2015-10/msg00065.html>, I am
interpreting this as "absence of sustained opposition" under Carlos's
definition at <https://sourceware.org/glibc/wiki/Consensus> and
proposing this patch for inclusion in glibc. I'd like to remind
people testing with 4.6 that if they move to testing with GCC 5 then
it will probably be about four years before they need to update the
compiler they use to test glibc again.
Although on the principles of time-based updates I think a move to
requiring binutils 2.23 would be reasonable, I'm not currently aware
of any cleanups that would facilitate so am not proposing that at this
time (but would expect to propose a move to requiring binutils 2.24 in
a year's time, as that brings features such as AVX512 support that
should allow some conditionals to be cleaned up). If someone thinks a
move to requiring 2.23 would help clean things up for their
architecture, please speak up. (And in general, I suspect there are
lots of architecture-specific configure tests that could be removed on
the basis of current GCC and binutils version requirements, given how
I've found architecture-independent tests obsolete on the basis of
version requirements going back 20 years.)
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).
* configure.ac (libc_cv_compiler_ok): Require GCC 4.7 or later.
* configure: Regenerated.
* manual/install.texi (Tools for Compilation): Document
requirement for GCC 4.7 or later.
* INSTALL: Regenerated.
This automatically-generated patch converts 29 function definitions in
glibc (including one in an example in the manual) from old-style K&R
to prototype-style. Following my other recent such patches, this one
deals with the case of function definitions where one K&R parameter
declaration declares multiple parameters, as in:
void
foo (a, b)
int a, *b;
{
}
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* crypt/crypt.c (_ufc_doit_r): Convert to prototype-style function
definition.
(_ufc_doit_r): Likewise.
* crypt/crypt_util.c (_ufc_copymem): Likewise.
(_ufc_output_conversion_r): Likewise.
* inet/inet_mkadr.c (__inet_makeaddr): Likewise.
* inet/rcmd.c (rcmd_af): Likewise.
(rcmd): Likewise.
(ruserok_af): Likewise.
(ruserok): Likewise.
(ruserok2_sa): Likewise.
(ruserok_sa): Likewise.
(iruserok_af): Likewise.
(iruserok): Likewise.
(__ivaliduser): Likewise.
(__validuser2_sa): Likewise.
* inet/rexec.c (rexec_af): Likewise.
(rexec): Likewise.
* inet/ruserpass.c (ruserpass): Likewise.
* locale/programs/xmalloc.c (xcalloc): Likewise.
* manual/examples/timeval_subtract.c (timeval_subtract): Likewise.
* math/w_drem.c (__drem): Likewise.
* math/w_dremf.c (__dremf): Likewise.
* math/w_dreml.c (__dreml): Likewise.
* misc/daemon.c (daemon): Likewise.
* resolv/res_debug.c (p_fqnname): Likewise.
* stdlib/div.c (div): Likewise.
* string/memcmp.c (memcmp_bytes): Likewise.
* sunrpc/pmap_rmt.c (pmap_rmtcall): Likewise.
* sunrpc/svc_udp.c (svcudp_bufcreate): Likewise.
The argument order for posix_fallocate64 in the manual
was wrong, it was listed as [fd, len, offset] when it
should have been [fd, offset, len].
Verified io/fcntl.h has the right argument order, and it
does. Verified generated PDF.
In the posix_fallocate description in the manual we list various
drawbacks with the emulation, including the fact that a file opened
with O_APPEND fails with EBADF. Similarly a file opened with O_WRONLY
fails with EBADF. We must be able to emulate a compare-and-swap via
pread/compare/pwrite in order to make the emulation as safe as possible.
It is not acceptable to ignore the read failure because it could result
in significant data loss across all of the blocks. There is no other way
to make this work without a true atomic CAS and SIGBUS handler (which
is looking more attractive as a way to remove the race condition).
This patch adds O_WRONLY to the manual as another bullet to clarify the
limits of the emulation.
Manual looks good in PDF.
Some distros build+install the timezone tools (zic/zdump/tzselect) outside
of glibc and use the upstream package directly. Add a configure flag to
glibc so they can disable install of those tools.
This allows tests to run & pass regardless of the configure flag. Only
the install of them is impacted.
Do not try to generate the manual when perl is unavailable. This
matches the behavior when makeinfo is unavailable. Otherwise the
install step fails when trying to generate the libm section since
it runs a perl script.
This patch adds extra inline functions to change the Program Priority
Register from ISA 2.07.
2015-08-19 Gabriel F. T. Gomes <gftg@linux.vnet.ibm.com>
* sysdeps/powerpc/sys/platform/ppc.h (__ppc_set_ppr_med_high,
__ppc_set_ppr_very_low): New functions.
* manual/platform.texi: Add documentation about
__ppc_set_ppr_med_high and __ppc_set_ppr_very_low.
a non-standard directory specified by the prefix make variable
fails with an error. Since this is an unsupported use case,
this change makes make install fail early and with a descriptive
error message when either the prefix or the exec_prefix make
variable is overridden on the command line.
Here is implementation of cos containing SSE, AVX, AVX2 and AVX512
versions according to Vector ABI which had been discussed in
<https://groups.google.com/forum/#!topic/x86-64-abi/LmppCfN1rZ4>.
Vector math library build and ABI testing enabled by default for x86_64.
* sysdeps/x86_64/fpu/Makefile: New file.
* sysdeps/x86_64/fpu/Versions: New file.
* sysdeps/x86_64/fpu/svml_d_cos_data.S: New file.
* sysdeps/x86_64/fpu/svml_d_cos_data.h: New file.
* sysdeps/x86_64/fpu/svml_d_cos2_core.S: New file.
* sysdeps/x86_64/fpu/svml_d_cos4_core.S: New file.
* sysdeps/x86_64/fpu/svml_d_cos4_core_avx.S: New file.
* sysdeps/x86_64/fpu/svml_d_cos8_core.S: New file.
* sysdeps/x86_64/fpu/svml_d_wrapper_impl.h: New file.
* sysdeps/x86_64/fpu/multiarch/svml_d_cos2_core.S: New file.
* sysdeps/x86_64/fpu/multiarch/svml_d_cos2_core_sse4.S: New file.
* sysdeps/x86_64/fpu/multiarch/svml_d_cos4_core.S: New file.
* sysdeps/x86_64/fpu/multiarch/svml_d_cos4_core_avx2.S: New file.
* sysdeps/x86_64/fpu/multiarch/svml_d_cos8_core.S: New file.
* sysdeps/x86_64/fpu/multiarch/svml_d_cos8_core_avx512.S: New file.
* sysdeps/x86_64/fpu/multiarch/Makefile (libmvec-sysdep_routines): Added
build of SSE, AVX2 and AVX512 IFUNC versions.
* sysdeps/x86/fpu/bits/math-vector.h: Added SIMD declaration for cos.
* math/bits/mathcalls.h: Added cos declaration with __MATHCALL_VEC.
* sysdeps/x86_64/configure.ac: Options for libmvec build.
* sysdeps/x86_64/configure: Regenerated.
* sysdeps/x86_64/sysdep.h (cfi_offset_rel_rsp): New macro.
* sysdeps/unix/sysv/linux/x86_64/libmvec.abilist: New file.
* manual/install.texi (Configuring and compiling): Document
--disable-mathvec.
* INSTALL: Regenerated.
* NEWS: Mention addition of libmvec and x86_64 vector cos.
Handle signed integer overflow correctly. Detect and reject O_APPEND.
Document drawbacks of emulation.
This does not completely address bug 15661, but improves the situation
somewhat.
I was told that Ma Shimao submitted a patch to add envz_remove to the
libc manual, but the patch could not be accepted since he does not
have a copyright assignment in place. I have been woefully behind on
libc-alpha recently and have not seen the patch or the discussion
thread. I have also not read the man page for envz_remove, so
Alexandre Oliva asked me if I could write this independently and post
a patch. The patch below is the result of the same - I have written
it based on the implementation in string/envz.c and Alex told me via
email that the function is AS, AC and MT-safe like envz_strip.
I assume Alex and Carlos cannot review this since they have been
tainted by the original patch (I haven't even tried to look for a link
to it since I don't want to be tainted) so someone else will have to
review this. If there are no reviewers till the end of the week, I
will commit this since I believe there is a chance that there are no
other reviewers who haven't read that thread.
* manual/string.texi (Envz Functions): Add envz_remove.
The manual gives "an example showing how to handle failure to open a
file correctly." The example function, open_sesame, uses the
newly-introduced strerror function and errno and
program_invocation_short_name variables. It fails to specify GNU
extensions, however, so attempts to use it in the following way:
int main (void) {open_sesame ("badname");}
fail during compilation with "error: ‘program_invocation_short_name’
undeclared", indicating the example is incomplete. The presence of
"#include"s suggest everything neccesary for the function to work should
be present. For completeness, the example is lacking the following line:
#define _GNU_SOURCE
as the declarations of program_invocation_*name in errno.h are wrapped
in an "#ifdef __USE_GNU" conditional.
The documentation of the variables is also expanded, adding that their
definition lies in errno.h and noting specifically they are GNU
extensions.
This patch refines the math.texi documentation of the goals for when
libm function raise the inexact and underflow exceptions. The
previous text was problematic in some cases around the underflow
threshold.
* Strictly, it would have meant that if the mathematical result of pow
was very slightly below DBL_MIN, for example, it was required to
raise the underflow exception; although normally a few ulps error
would be OK, if that error meant the computed value was slightly
above DBL_MIN it would fail the previously described underflow
exception goal.
* Similarly, strict IEEE semantics would imply that sin (DBL_MIN), in
round-to-nearest mode, underflows on before-rounding but not
after-rounding architectures, while returning DBL_MIN; the previous
wording would have required an underflow exception, so preventing
checks for a result with absolute value below DBL_MIN from being
sufficient checks to determine whether the exception is required.
(Under the previous wording, checks for a result with absolute value
<= DBL_MIN wouldn't have been sufficient either, because in
FE_TOWARDZERO mode a result of DBL_MIN definitely does not result
from an underflowing infinite-precision result.)
* The previous wording about rounding infinite-precision values could
be taken to mean all exceptions including "inexact" must be
consistent with some such value. That would mean that a result of
DBL_MIN in FE_UPWARD mode with "inexact" raised must also have
"underflow" raised on before-rounding architectures. Again, that
would cause problems for computing a result (possibly with spurious
"inexact" exceptions) and then using a rounding-mode-independent
test for results with absolute value below DBL_MIN to determine
whether an underflow exception must be forced in case the underflows
from intermediate computations happened to be exact.
By refining the documentation, this patch avoids stating goals for
accuracy close to the underflow threshold that were stricter than
applied anywhere else, and allows the implementation strategy of:
compute a result within a few ulps, taking care to avoid underflows in
intermediate computations, then force an underflow exception if that
result was subnormal. Only fully-defined functions such as fma need
to take greater care about the exact underflow threshold (including
its dependence on whether the architecture is before-rounding or
after-rounding, and on the rounding mode on after-rounding
architectures).
(If the rounding mode is changed as part of the computation, it's
still necessary to ensure that not just intermediate computations, but
the final computation of the result to be returned, do not raise
underflow if that result is the least normal value and underflow would
be inconsistent with the original rounding mode. Since such code can
readily discard exceptions as part of saving and restoring the
rounding mode - SET_RESTORE_ROUND_NOEX etc. - I don't think that
should be a problem in practice.)
* manual/math.texi (Errors in Math Functions): Clarify goals
regarding inexact and underflow exceptions.
The tv_sec is of type time_t in both struct timeval and struct timespec.
This matches the implementation and also the relevant standard (checked
C11 for timespec and opengroup for timeval).
Update all translations.
Update contributions in the manual.
Update installation notes with information about newest working tools.
Reconfigure using exactly autoconf 2.69.
Regenerate INSTALL.
The merge of the latest gettext code introduced changes to the yacc
parser source that are incompatible with versions of bison older
than 2.7. Add a configure check for the appropriate versions and
document the requirement in INSTALL.
ChangeLog:
2014-12-22 Will Newton <will.newton@linaro.org>
* manual/install.texi: Document that we require bison 2.7
or above.
* INSTALL: Regenerate.
* configure.ac: Use AC_CHECK_PROG_VER instead of
AC_PATH_PROG when checking for bison and check for
version 2.7 or above.
* configure: Regenerate.
C99, C11, POSIX, and the glibc implementation do guarantee that the
pointers passed to the qsort comparison function lie within the array.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
It seems we require texinfo 4.7 for the --plaintext option, so
document that and check for the correct version in configure.
ChangeLog:
2014-12-15 Will Newton <will.newton@linaro.org>
* manual/install.texi: Bump required version of texinfo
to 4.7 from 4.5.
* INSTALL: Regenerated.
* configure.ac: Check for makeinfo version 4.7 and above.
* configure: Regenerated.
Under certain conditions on the size of the array and its items,
qsort() may fall back to an in-place quicksort if it cannot allocate
memory for a temporary array with malloc(). This algorithm is not a
stable sort even if the comparison function is written in the
described manner.
Fixes#10672.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
As discussed starting at
<https://sourceware.org/ml/libc-alpha/2014-11/msg00323.html>, this
patch makes the glibc build use -Werror by default to avoid
accidentally adding new warnings to the build. The configure option
--disable-werror can be used to disable this.
-Wno-error=undef is temporarily used because the build isn't clean
regarding -Wundef warnings. The idea is that once the remaining
-Wundef warnings have been cleaned up (in at least one configuration),
-Wno-error=undef will be removed.
I get a clean build and test on x86_64 (GCC 4.9 branch) with this
patch. The expectation is that this may well break the build for some
other configurations, and people seeing such breakage should make
appropriate fixes to fix or suppress the warnings for their
configurations. In some cases that may involve using pragmas as the
right fix (I think that will be right for the -Wno-inline issue for
MIPS I referred to in
<https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, for
example), in some cases -Wno-error in sysdeps makefiles (__restore_rt
in MIPS sigaction, for example), in some cases substantive fixes for
the warnings.
Note that if, with a view to listing all the warnings then fixing them
all, you just look for "warning:" in output from building and testing
with --disable-werror, you'll see lots of warnings from the linker
about functions such as tmpnam. Those warnings can be ignored - only
compiler warnings are relevant to -Werror, not linker warnings.
* configure.ac (--disable-werror): New configure option.
(enable_werror): New AC_SUBST.
* configure: Regenerated.
* config.make.in (enable-werror): New variable.
* Makeconfig [$(enable-werror) = yes] (+gccwarn): Add -Werror
-Wno-error=undef.
(+gccwarn-c): Do not use -Werror=implicit-function-declaration.
* manual/install.texi (Configuring and compiling): Document
--disable-werror.
* INSTALL: Regenerated.
* debug/Makefile (CFLAGS-tst-chk1.c): Add -Wno-error.
(CFLAGS-tst-chk2.c): Likewise.
(CFLAGS-tst-chk3.c): Likewise.
(CFLAGS-tst-chk4.cc): Likewise.
(CFLAGS-tst-chk5.cc): Likewise.
(CFLAGS-tst-chk6.cc): Likewise.
(CFLAGS-tst-lfschk1.c): Likewise.
(CFLAGS-tst-lfschk2.c): Likewise.
(CFLAGS-tst-lfschk3.c): Likewise.
(CFLAGS-tst-lfschk4.cc): Likewise.
(CFLAGS-tst-lfschk5.cc): Likewise.
(CFLAGS-tst-lfschk6.cc): Likewise.
for ChangeLog
* sysdeps/posix/ctermid.c (ctermid): Return a pointer to a
string literal if not passed a buffer.
* manual/job.texi (ctermid): Update reasoning, note deviation
from posix, suggest mtasurace when not passed a buffer, for
future non-preliminary safety notes.
for ChangeLog
* manual/Makefile ($(objpfx)stamp-summary): Require
check-safety.sh to pass.
* manual/check-safety.sh: Wish for verification that every
@deftypefn and @deftypefun is followed by a @safety remark.
2014-11-18 Tom de Vries <tom@codesoucery.com>
* manual/signal.texi (Primitives Interrupted by Signals): In section,
replace BSD Handler xref with BSD Signal Handling.
As discussed in the thread starting at
<https://sourceware.org/ml/libc-alpha/2014-10/msg00792.html>, and
continuing into November, this patch increases the minimum GCC version
for building glibc to 4.6 (there seemed to be no clear consensus for
4.7). In particular, this allows us to use #pragma GCC diagnostic for
fine-grained warning control with -Werror (subject to establishing a
suitable policy for that use). The documentation has a statement, as
requested, about the most recent GCC version tested for building
glibc, and I've updated <https://sourceware.org/glibc/wiki/Release> to
refer to updating that statement. A NEWS entry is added for this
change, although previous such changes didn't get them.
Tested for x86_64 (testsuite, and that installed shared libraries are
unchanged by this patch).
* configure.ac (libc_cv_compiler_ok): Require GCC 4.6 or later.
* configure: Regenerated.
* manual/install.texi (Tools for Compilation): Document a
requirement of GCC 4.6 or later and that GCC 4.9 is the newest
compiler verified to work.
* INSTALL: Regenerated.
We add Linux-realted comments about the atomicity of
write with respect to file offsets. As of Linux 3.14
the file offset update is atomic. That means that
multiple threads calling the write syscall can not possibly
get the same file offset. Therefore the writes should
not overlap and data should not be lost as is required
by POSIX.
I noticed that install.texi was out of date with regard to the actual
autoconf version requirement for regenerating configure scripts. This
patch updates the documentation.
* manual/install.texi (Tools for Compilation): Update autoconf
version requirements.
* INSTALL: Regenerated.
Add Linux-specific comments about the atomicity of write() and
the POSIX requirements.
2014-10-29 Carlos O'Donell <carlos@redhat.com>
* manual/llio.texi: Add comments discussing why write() may be
considered MT-unsafe on Linux.
Open file description locks have been merged into the Linux kernel for
v3.15. Add the appropriate command-value definitions and an update to
the manual that describes their usage.
This patch updates miscellaneous files from their upstream sources:
texinfo.tex from Texinfo, config.guess and config.sub from config.git,
install-sh from automake and move-if-change from gnulib.
Tested x86_64 that installed shared libraries are unchanged by the
patch; also looked at the generated libc.pdf manual.
* manual/texinfo.tex: Update to version 2014-05-05.10 with
trailing whitespace removed.
* scripts/config.guess: Update to version 2014-03-23.
* scripts/config.sub: Update to version 2014-05-01
* scripts/install-sh: Update to version 2013-12-25.23.
* scripts/move-if-change: Update from gnulib.
Various glibc build / install / test code has C locale settings that
are redundant with LC_ALL=C.
LC_ALL takes precedence over LANG, so anywhere that sets LC_ALL=C
(explicitly, or through it being in the default environment for
running tests) does not need to set LANG=C. LC_ALL=C also takes
precedence over LANGUAGE, since
2001-01-02 Ulrich Drepper <drepper@redhat.com>
* intl/dcigettext.c (guess_category_value): Rewrite so that LANGUAGE
value is ignored if the selected locale is the C locale.
* intl/tst-gettext.c: Set locale for above change.
* intl/tst-translit.c: Likewise.
and so settings of LANGUAGE=C are also redundant when LC_ALL=C is
set. One test also had LC_ALL=C in its -ENV setting, although it's
part of the default environment used for tests.
This patch removes the redundant settings. It removes a suggestion in
install.texi of setting LANGUAGE=C LC_ALL=C for "make install"; the
Makefile.in target "install" already sets LC_ALL_C so there's no need
for the user to set it (and nor should there be any need for the user
to set it).
If some build machine tool used by "make install" uses a version of
libintl predating that 2001 change, and the user has LANGUAGE set, the
removal of LANGUAGE=C from the Makefile.in "install" rule could in
principle affect the user's installation. However, I don't think we
need to be concerned about pre-2001 build tools.
Tested x86_64.
* Makefile (install): Don't set LANGUAGE.
* Makefile.in (install): Likewise.
* assert/Makefile (test-assert-ENV): Remove variable.
(test-assert-perr-ENV): Likewise.
* elf/Makefile (neededtest4-ENV): Likewise.
* iconvdata/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Don't set LANGUAGE.
* io/ftwtest-sh (LANG): Remove variable.
* libio/Makefile (tst-widetext-ENV): Likewise.
* manual/install.texi (Running make install): Don't refer to
environment settings for make install.
* INSTALL: Regenerated.
* nptl/tst-tls6.sh: Don't set LANG.
* posix/globtest.sh (LANG): Remove variable.
* string/Makefile (tester-ENV): Likewise.
(inl-tester-ENV): Likewise.
(noinl-tester-ENV): Likewise.
* sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Don't set LANGUAGE.
* timezone/Makefile (build-testdata): Use $(built-program-cmd)
without explicit environment settings.
localedata/ChangeLog:
* tst-fmon.sh: Don't set LANGUAGE.
* tst-locale.sh: Likewise.
One wart in the original support for test wrappers for cross testing,
as noted in
<https://sourceware.org/ml/libc-alpha/2012-10/msg00722.html>, is the
requirement for test wrappers to pass a poorly-defined set of
environment variables from the build system to the system running the
glibc under test. Although some variables are passed explicitly via
$(test-wrapper-env), including LD_* variables that simply can't be
passed implicitly because of the side effects they'd have on the build
system's dynamic linker, others are passed implicitly, including
variables such as GCONV_PATH and LOCPATH that could potentially affect
the build system's libc (so effectively relying on any such effects
not breaking the wrappers). In addition, the code in
cross-test-ssh.sh for preserving environment variables is fragile (it
depends on how bash formats a list of exported variables, and could
well break for multi-line variable definitions where the contents
contain things looking like other variable definitions).
This patch moves to explicitly passing environment variables via
$(test-wrapper-env). Makefile variables that previously used
$(test-wrapper) are split up into -before-env and -after-env parts
that can be passed separately to the various .sh files used in
testing, so those files can then insert environment settings between
the two parts.
The common default environment settings in make-test-out are made into
a separate makefile variable that can also be passed to scripts,
rather than many scripts duplicating those settings (for testing an
installed glibc, it is desirable to have the GCONV_PATH setting on
just one place, so just that one place needs to support it pointing to
an installed sysroot instead of the build tree). The default settings
are included in the variables such as $(test-program-prefix), so that
if tests do not need any non-default settings they can continue to use
single variables rather than the split-up variables.
Although this patch cleans up LC_ALL=C settings (that being part of
the common defaults), various LANG=C and LANGUAGE=C settings remain.
Those are generally unnecessary and I propose a subsequent cleanup to
remove them. LC_ALL takes precedence over LANG, and while LANGUAGE
takes precedence over LC_ALL, it only does so for settings other than
LC_ALL=C. So LC_ALL=C on its own is sufficient to ensure the C
locale, and anything that gets LC_ALL=C does not need the other
settings.
While preparing this patch I noticed some tests with .sh files that
appeared to do nothing beyond what the generic makefile support for
tests can do (localedata/tst-wctype.sh - the makefiles support -ENV
variables and .input files - and localedata/tst-mbswcs.sh - just runs
five tests that could be run individually from the makefile). So I
propose another subsequent cleanup to move those to using the generic
support instead of special .sh files.
Tested x86_64 (native) and powerpc32 (cross).
* Makeconfig (run-program-env): New variable.
(run-program-prefix-before-env): Likewise.
(run-program-prefix-after-env): Likewise.
(run-program-prefix): Define in terms of new variables.
(built-program-cmd-before-env): New variable.
(built-program-cmd-after-env): Likewise.
(built-program-cmd): Define in terms of new variables.
(test-program-prefix-before-env): New variable.
(test-program-prefix-after-env): Likewise.
(test-program-prefix): Define in terms of new variables.
(test-program-cmd-before-env): New variable.
(test-program-cmd-after-env): Likewise.
(test-program-cmd): Define in terms of new variables.
* Rules (make-test-out): Use $(run-program-env).
* scripts/cross-test-ssh.sh (env_blacklist): Remove variable.
(help): Do not mention environment variables. Mention
--timeoutfactor option.
(timeoutfactor): New variable.
(blacklist_exports): Remove function.
(exports): Remove variable.
(command): Do not include ${exports}.
* manual/install.texi (Configuring and compiling): Do not mention
test wrappers preserving environment variables. Mention that last
assignment to a variable must take precedence.
* INSTALL: Regenerated.
* benchtests/Makefile (run-bench): Use $(run-program-env).
* catgets/Makefile ($(objpfx)test1.cat): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
($(objpfx)test2.cat): Do not specify environment variables
explicitly.
($(objpfx)de/libc.cat): Use $(built-program-cmd-before-env),
$(run-program-env) and $(built-program-cmd-after-env).
($(objpfx)test-gencat.out): Use $(test-program-cmd-before-env),
$(run-program-env) and $(test-program-cmd-after-env).
($(objpfx)sample.SJIS.cat): Do not specify environment variables
explicitly.
* catgets/test-gencat.sh: Use test_program_cmd_before_env,
run_program_env and test_program_cmd_after_env arguments.
* elf/Makefile ($(objpfx)tst-pathopt.out): Use $(run-program-env).
* elf/tst-pathopt.sh: Use run_program_env argument.
* iconvdata/Makefile ($(objpfx)iconv-test.out): Use
$(test-wrapper-env) and $(run-program-env).
* iconvdata/run-iconv-test.sh: Use test_wrapper_env and
run_program_env arguments.
* iconvdata/tst-table.sh: Do not set GCONV_PATH explicitly.
* intl/Makefile ($(objpfx)tst-gettext.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
($(objpfx)tst-gettext2.out): Likewise.
* intl/tst-gettext.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* intl/tst-gettext2.sh: Likewise.
* intl/tst-gettext4.sh: Do not set environment variables
explicitly.
* intl/tst-gettext6.sh: Likewise.
* intl/tst-translit.sh: Likewise.
* malloc/Makefile ($(objpfx)tst-mtrace.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* malloc/tst-mtrace.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* math/Makefile (run-regen-ulps): Use $(run-program-env).
* nptl/Makefile ($(objpfx)tst-tls6.out): Use $(run-program-env).
* nptl/tst-tls6.sh: Use run_program_env argument. Set LANG=C
explicitly with each use of ${test_wrapper_env}.
* posix/Makefile ($(objpfx)wordexp-tst.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* posix/tst-getconf.sh: Do not set environment variables
explicitly.
* posix/wordexp-tst.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* stdio-common/tst-printf.sh: Do not set environment variables
explicitly.
* stdlib/Makefile ($(objpfx)tst-fmtmsg.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* stdlib/tst-fmtmsg.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
Split $test calls into $test_pre and $test.
* timezone/Makefile (build-testdata): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
localedata/ChangeLog:
* Makefile ($(addprefix $(objpfx),$(CTYPE_FILES))): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
($(objpfx)sort-test.out): Use $(test-program-prefix-before-env),
$(run-program-env) and $(test-program-prefix-after-env).
($(objpfx)tst-fmon.out): Use $(run-program-prefix-before-env),
$(run-program-env) and $(run-program-prefix-after-env).
($(objpfx)tst-locale.out): Use $(built-program-cmd-before-env),
$(run-program-env) and $(built-program-cmd-after-env).
($(objpfx)tst-trans.out): Use $(run-program-prefix-before-env),
$(run-program-env), $(run-program-prefix-after-env),
$(test-program-prefix-before-env) and
$(test-program-prefix-after-env).
($(objpfx)tst-ctype.out): Use $(test-program-cmd-before-env),
$(run-program-env) and $(test-program-cmd-after-env).
($(objpfx)tst-wctype.out): Likewise.
($(objpfx)tst-langinfo.out): Likewise.
($(objpfx)tst-langinfo-static.out): Likewise.
* gen-locale.sh: Use localedef_before_env, run_program_env and
localedef_after_env arguments.
* sort-test.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* tst-ctype.sh: Use tst_ctype_before_env, run_program_env and
tst_ctype_after_env arguments.
* tst-fmon.sh: Use run_program_prefix_before_env, run_program_env
and run_program_prefix_after_env arguments.
* tst-langinfo.sh: Use tst_langinfo_before_env, run_program_env
and tst_langinfo_after_env arguments.
* tst-locale.sh: Use localedef_before_env, run_program_env and
localedef_after_env arguments.
* tst-mbswcs.sh: Do not set environment variables explicitly.
* tst-numeric.sh: Likewise.
* tst-rpmatch.sh: Likewise.
* tst-trans.sh: Use run_program_prefix_before_env,
run_program_env, run_program_prefix_after_env,
test_program_prefix_before_env and test_program_prefix_after_env
arguments.
* tst-wctype.sh: Use tst_wctype_before_env, run_program_env and
tst_wctype_after_env arguments.
The four functions {alpha,version}sort{,64} take parameters of type
const struct dirent{,64} **, not const void *.
Signed-off-by: Rasmus Villemoes <rv@rasmusvillemoes.dk>
This patch increases the minimum Linux kernel version for glibc to
2.6.32, as discussed in the thread starting at
<https://sourceware.org/ml/libc-alpha/2014-01/msg00511.html>.
This patch just does the minimal change to arch_minimum_kernel
settings (and LIBC_LINUX_VERSION, which determines the minimum kernel
headers version, as it doesn't make sense for that to be older than
the minimum kernel that can be used at runtime). Followups would be
expected to do, roughly and not necessarily precisely in this order:
* Remove __LINUX_KERNEL_VERSION checks in kernel-features.h files
where those checks are always true / always false for kernels 2.6.32
and above.
* Otherwise simplify/improve conditionals in those files (for example,
where defining once in the main file then undefining in
architecture-specific files makes things clearer than having lots of
separate definitions of the same macro), possibly fixing in the
process cases where a macro should optimally have been defined for a
given architecture but wasn't. (In the review in preparation for
this version increase I checked what the right conditions should be
for all macros in the main kernel-features.h whose definitions there
would have been affected by the increase - but I only fixed that
subset of the issues found where --enable-kernel=2.6.32 would have
caused a kernel feature to be wrongly assumed to be present, not any
cases where a feature is not assumed but could be assumed.)
* Remove conditionals on __ASSUME_* where they can now be taken to be
always-true, and the definitions when the macros are only used in
Linux-specific files.
* Split more architectures out of the main kernel-features.h (like
ex-ports architectures), once various of the architecture
conditionals there have been eliminated so the new
architecture-specific files are no larger than actually necessary.
Tested x86_64.
2014-03-27 Joseph Myers <joseph@codesourcery.com>
[BZ #9894]
* sysdeps/unix/sysv/linux/configure.ac (LIBC_LINUX_VERSION):
Change to 2.6.32.
(arch_minimum_kernel): Change all 2.6.16 settings to 2.6.32.
* sysdeps/unix/sysv/linux/configure: Regenerated.
* sysdeps/unix/sysv/linux/microblaze/configure.ac: Remove file.
* sysdeps/unix/sysv/linux/microblaze/configure: Likewise.
* sysdeps/unix/sysv/linux/tile/configure.ac: Likewise.
* sysdeps/unix/sysv/linux/tile/configure: Likewise.
* README: Update reference to required Linux kernel version.
* manual/install.texi (Linux): Update reference to required Linux
kernel headers version.
* INSTALL: Regenerated.
In the glibc manual we have a "Roadmap to the manual" section at
the end of the "Introduction" chapter.
The introductory text says "Here is an overview of the contents
of the remaining chapters of this manual.", but then proceeds to
list chapters out of order and some chapter are never referenced.
This commit reorders the overview to correctly match the manual
order.
See:
https://sourceware.org/ml/libc-alpha/2014-02/msg00823.html
Calling setcontext from a signal handler can be done safely so
it is sufficient to note that it is not recommended.
Also mention in setcontext documentation that the behaviour of
setcontext when restoring a context created by a call to a signal
handler is unspecified.
2014-04-17 Will Newton <will.newton@linaro.org>
* manual/setjmp.texi (System V contexts): Add note that
calling setcontext on a context created by a call to a
signal handler is undefined. Update text to note that
setcontext from a signal handler is possible but not
recommended.
If the user has requested automatic buffer creation, getline may create
it and not free things when an error occurs. That means the user is
always responsible for calling free() regardless of the return value.
The current documentation does not explicitly cover this which leaves it
slightly ambiguous to the reader. So clarify things.
URL: https://sourceware.org/bugzilla/show_bug.cgi?id=5666
This patch is an updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00198.html> and
<https://sourceware.org/ml/libc-alpha/2014-03/msg00180.html>.
Normal practice for software testsuites is that rather than
terminating immediately when a test fails, they continue running and
report at the end on how many tests passed or failed.
The principle behind the glibc testsuite stopping on failure was
probably that the expected state is no failures and so any failure
indicates a problem such as miscompilation. In practice, while this
is fairly close to true for native testing on x86_64 and x86 (kernel
bugs and race conditions can still cause intermittent failures), it's
less likely to be the case on other platforms, and so people testing
glibc run the testsuite with "make -k" and then examine the logs to
determine whether the failures are what they expect to fail on that
platform, possibly with some automation for the comparison.
This patch switches the glibc testsuite to the normal convention of
not stopping on failure - unless you use stop-on-test-failure=y, in
which case it behaves essentially as it did before (and does not
generate overall test summaries on failure). Instead, the summary
tests.sum may contain tests that FAILed. At the end of the test run,
any FAIL or ERROR lines from tests.sum are printed, and then it exits
with error status if there were any such lines. In addition, build
failures will also cause the test run to stop - this has the
justification that those *do* indicate serious problems that should be
promptly fixed and aren't generally hard to fix (but apart from that,
avoiding the build stopping on those failures seems harder).
Note that unlike the previous patches in this series, this *does*
require people with automation around testing glibc to change their
processes - either to start using tests.sum / xtests.sum to track
failures and compare them with expectations (with or without also
using "make -k" and examining "make" logs to identify build failures),
or else to use stop-on-test-failure=y and ignore the new tests.sum /
xtests.sum mechanism. (If all you check is the exit status from "make
check", no changes are needed unless you want to avoid test runs
continuing after the first failure.)
Tested x86_64.
* scripts/evaluate-test.sh: Handle fourth argument to determine
whether test run should stop on failure.
* Makeconfig (stop-on-test-failure): New variable.
(evaluate-test): Pass fourth argument to evaluate-test.sh based on
$(stop-on-test-failure).
* Makefile (tests): Give a summary of results from testing and
exit with failure status if they include an ERROR or FAIL.
(xtests): Likewise.
* manual/install.texi (Configuring and compiling): Mention
stop-on-test-failure=y.
* INSTALL: Regenerated.
As recently discussed
<https://sourceware.org/ml/libc-alpha/2014-02/msg00670.html>, it
doesn't seem particularly useful for libm-test-ulps files to contain
huge amounts of data on ulps for individual tests; just the global
maximum observed ulps for each function, together with the
verification of exceptions, errno and special results such as
infinities and NaNs for each test, suffices to verify that a
function's behavior on the given test inputs is within the expected
accuracy. Removing this data reduces source tree churn caused by
updates to these files when libm tests are added, and reduces the
frequency with which testsuite additions actually need libm-test-ulps
changes at all.
Accordingly, this patch removes that data, so that individual tests
get checked against the global bounds for the given function and only
generate an error if those are exceeded. Tested x86_64 (including
verifying that if an ulps value is artificially reduced, the tests do
indeed fail as they should and "make regen-ulps" generates the
expected changes).
* math/libm-test.inc (struct ulp_data): Don't refer to ulps for
individual tests in comment.
(libm-test-ulps.h): Don't refer to test_ulps in #include comment.
(prev_max_error): New variable.
(prev_real_max_error): Likewise.
(prev_imag_max_error): Likewise.
(compare_ulp_data): Don't refer to test names in comment.
(find_test_ulps): Remove function.
(find_function_ulps): Likewise.
(find_complex_function_ulps): Likewise.
(init_max_error): Take function name as argument. Look up ulps
for that function.
(print_ulps): Remove function.
(print_max_error): Use prev_max_error instead of calling
find_function_ulps.
(print_complex_max_error): Use prev_real_max_error and
prev_imag_max_error instead of calling find_complex_function_ulps.
(check_float_internal): Take max_ulp parameter instead of calling
find_test_ulps. Don't call print_ulps.
(check_float): Update call to check_float_internal.
(check_complex): Update calls to check_float_internal.
(START): Pass argument to init_max_error.
* math/gen-libm-test.pl (%results): Don't include "kind"
information.
(parse_ulps): Don't handle ulps of individual tests.
(print_ulps_file): Likewise.
(output_ulps): Likewise.
* math/README.libm-test: Update.
* manual/libm-err-tab.pl (parse_ulps): Don't handle ulps of
individual tests.
* sysdeps/aarch64/libm-test-ulps: Remove individual test ulps.
* sysdeps/alpha/fpu/libm-test-ulps: Likewise.
* sysdeps/arm/libm-test-ulps: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/ia64/fpu/libm-test-ulps: Likewise.
* sysdeps/m68k/coldfire/fpu/libm-test-ulps: Likewise.
* sysdeps/m68k/m680x0/fpu/libm-test-ulps: Likewise.
* sysdeps/microblaze/libm-test-ulps: Likewise.
* sysdeps/mips/mips32/libm-test-ulps: Likewise.
* sysdeps/mips/mips64/libm-test-ulps: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Likewise.
* sysdeps/powerpc/nofpu/libm-test-ulps: Likewise.
* sysdeps/s390/fpu/libm-test-ulps: Likewise.
* sysdeps/sh/libm-test-ulps: Likewise.
* sysdeps/sparc/fpu/libm-test-ulps: Likewise.
* sysdeps/tile/libm-test-ulps: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* sysdeps/hppa/fpu/libm-test-ulps: Remove individual test ulps.
The glibc manual uses special annotations to include functions
in the summary chapter. These annotations were missing from the
functions in the threads chapter. This patch adds those special
markers and in turn adds these functions to the summary chapter.
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I
noted it was necessary to add includes of Makeconfig early in various
subdirectory makefiles for the tests-special variable settings added
by that patch to be conditional on configuration information. No-one
commented on the general question there of whether Makeconfig should
always be included immediately after the definition of subdir.
This patch implements that early inclusion of Makeconfig in each
directory (which is a lot easier than consistent placement of includes
of Rules). Includes are added if needed, or moved up if already
present. Subdirectory "all:" targets are removed, since Makeconfig
provides one.
There is potential for further cleanups I haven't done. Rules and
Makerules have code such as
ifneq "$(findstring env,$(origin headers))" ""
headers :=
endif
to override to empty any value of various variables that came from the
environment. I think there is a case for Makeconfig setting all the
subdirectory variables (other than subdir) to empty to ensure no
outside value is going to take effect if a subdirectory fails to
define a variable. (A list of such variables, possibly out of date
and incomplete, is in manual/maint.texi.) Rules and Makerules would
give errors if Makeconfig hadn't already been included, instead of
including it themselves. The special code to override values coming
from the environment would then be obsolete and could be removed.
Tested x86_64, including that installed binaries are identical before
and after the patch.
* argp/Makefile: Include Makeconfig immediately after defining
subdir.
* assert/Makefile: Likewise.
* benchtests/Makefile: Likewise.
* catgets/Makefile: Likewise.
* conform/Makefile: Likewise.
* crypt/Makefile: Likewise.
* csu/Makefile: Likewise.
(all): Remove target.
* ctype/Makefile: Include Makeconfig immediately after defining
subdir.
* debug/Makefile: Likewise.
* dirent/Makefile: Likewise.
* dlfcn/Makefile: Likewise.
* gmon/Makefile: Likewise.
* gnulib/Makefile: Likewise.
* grp/Makefile: Likewise.
* gshadow/Makefile: Likewise.
* hesiod/Makefile: Likewise.
* hurd/Makefile: Likewise.
(all): Remove target.
* iconvdata/Makefile: Include Makeconfig immediately after
defining subdir.
* inet/Makefile: Likewise.
* intl/Makefile: Likewise.
* io/Makefile: Likewise.
* libio/Makefile: Likewise.
(all): Remove target.
* locale/Makefile: Include Makeconfig immediately after defining
subdir.
* login/Makefile: Likewise.
* mach/Makefile: Likewise.
(all): Remove target.
* malloc/Makefile: Include Makeconfig immediately after defining
subdir.
(all): Remove target.
* manual/Makefile: Include Makeconfig immediately after defining
subdir.
* math/Makefile: Likewise.
* misc/Makefile: Likewise.
* nis/Makefile: Likewise.
* nss/Makefile: Likewise.
* po/Makefile: Likewise.
(all): Remove target.
* posix/Makefile: Include Makeconfig immediately after defining
subdir.
* pwd/Makefile: Likewise.
* resolv/Makefile: Likewise.
* resource/Makefile: Likewise.
* rt/Makefile: Likewise.
* setjmp/Makefile: Likewise.
* shadow/Makefile: Likewise.
* signal/Makefile: Likewise.
* socket/Makefile: Likewise.
* soft-fp/Makefile: Likewise.
* stdio-common/Makefile: Likewise.
* stdlib/Makefile: Likewise.
* streams/Makefile: Likewise.
* string/Makefile: Likewise.
* sunrpc/Makefile: Likewise.
(all): Remove target.
* sysvipc/Makefile: Include Makeconfig immediately after defining
subdir.
* termios/Makefile: Likewise.
* time/Makefile: Likewise.
* timezone/Makefile: Likewise.
(all): Remove target.
* wcsmbs/Makefile: Include Makeconfig immediately after defining
subdir.
* wctype/Makefile: Likewise.
libidn/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
localedata/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
(all): Remove target.
nptl/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
nptl_db/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
This patch adds a new "Inter-Process Communication"
chapter to cover the sem*, msg*, and shm* functions.
Initially we document only the sem* function signatures
and their safety notes.
This is a minimal patch to remove _BSD_SOURCE and _SVID_SOURCE from
the documented user API, making them into aliases for _DEFAULT_SOURCE
with a #warning given, but keeping most of the features.h logic using
those macros and all the exising __USE_* conditionals, on the basis
that all the consequent cleanups will go in followup patches.
Tested x86_64.
* include/features.h: Update comment documenting feature test
macros.
[_BSD_SOURCE || _SVID_SOURCE]: Give #warning. Define
_DEFAULT_SOURCE.
* manual/creature.texi (_BSD_SOURCE): Remove documentation.
(_SVID_SOURCE): Likewise.
(_DEFAULT_SOURCE): Update description of default features.
(Feature Test Macros): Don't mention _SVID_SOURCE in conjunction
with _GNU_SOURCE.
* manual/filesys.texi (__ftw_func_t): Do not refer to _BSD_SOURCE.
(S_ISVTX): Likewise.
* manual/math.texi (Mathematical Constants): Likewise.
* manual/signal.texi (Interrupted Primitives): Likewise.
* manual/startup.texi (putenv): Do not refer to _SVID_SOURCE.
* math/test-matherr.c (_SVID_SOURCE): Do not define.
* sysvipc/sys/ipc.h [__USE_SVID && !__USE_XOPEN && __GNUC__ >= 2]:
Don't refer to _SVID_SOURCE in warning text.
Use the term "triggered" instead of "hit" when talking about probe
points.
ChangeLog:
2014-02-11 Will Newton <will.newton@linaro.org>
* manual/probes.texi (Mathematical Function Probes): Use
"triggered" instead of "hit".
Add some documentation of the setjmp, longjmp and longjmp_target
Systemtap probe points.
ChangeLog:
2014-02-11 Will Newton <will.newton@linaro.org>
* manual/probes.texi (Internal Probes): Add documentation
of setjmp, longjmp and longjmp_target probes.
The mixed use of automatic and manual node next, previous,
and top specification causes warning when building the manual.
This fix explicitly specifies the node's next, previous and top
values to fix the warning.
pthread_getspecific, pthread_setspecific): Format with
@deftypefun, and add @safety note.
* manual/signal.texi: Move comments that analyze the above
functions to their home place.
This patch updates various miscellaneous files we take from upstream
GNU sources (texinfo.texi, config.guess, config.sub - various others
haven't changed upstream since we last updated them) to their current
upstream versions.
Tested x86_64.
* manual/texinfo.tex: Update to version 2013-11-26.10 with
trailing whitespace removed.
* scripts/config.guess: Update to version 2013-11-29.
* scripts/config.sub: Update to version 2013-10-01.
This patch adds a feature test macro _DEFAULT_SOURCE to enable the
default set of header declarations.
The intention is: if _DEFAULT_SOURCE is not used there is no change to
the set of __USE_* macros glibc defines; if it's used on its own, and
without compiler options such as -std=c99 that define __STRICT_ANSI__,
again, there is no change; if it's used together with the macros it
approximately (i.e., apart from __USE_POSIX_IMPLICITLY) implies
(-D_BSD_SOURCE -D_SVID_SOURCE -D_POSIX_C_SOURCE=200809L), again, there
is no change. Otherwise, it causes the relevant features to be
enabled, even if __STRICT_ANSI__, or another feature test macro, would
cause them to be disabled.
This macro deliberately bundles the POSIX.1-2008 (non-X/Open)
functionality with the BSD/SVID/"misc" functionality, rather than
defining a macro that gives just the latter, as many of the header
cleanups resulting from removing _BSD_SOURCE and _SVID_SOURCE support
are only possible when BSD/SVID/"misc" is always bundled with
POSIX.1-2008.
Tested x86_64.
* include/features.h: Update comment documenting feature test
macros. Mention _DEFAULT_SOURCE in comment.
[_GNU_SOURCE] (_DEFAULT_SOURCE): Undefine and redefine.
[_DEFAULT_SOURCE]: Undefine and redefine _DEFAULT_SOURCE,
_BSD_SOURCE and _SVID_SOURCE.
[!__STRICT_ANSI__ && !_ISOC99_SOURCE && !_POSIX_SOURCE &&
!_POSIX_C_SOURCE && !_XOPEN_SOURCE && !_BSD_SOURCE &&
!_SVID_SOURCE]: Likewise.
[_DEFAULT_SOURCE && !_POSIX_SOURCE && !_POSIX_C_SOURCE]
(__USE_POSIX_IMPLICITLY): Define.
[_DEFAULT_SOURCE && !_POSIX_SOURCE && !_POSIX_C_SOURCE]
(_POSIX_SOURCE): Undefine and redefine.
[_DEFAULT_SOURCE && !_POSIX_SOURCE && !_POSIX_C_SOURCE]
(_POSIX_C_SOURCE): Likewise.
* manual/creature.texi (_DEFAULT_SOURCE): Document.
(Feature Test Macros): Update documentation of default features.
The commit d136c6dc resulted in menu text for the "Top" node being added
to the INSTALL file on regeneration. As the full menu is not displayed
in the plain text file anyway, suppress the menu section completely to
avoid the additional text.
Also regenerate the INSTALL file to commit a small formatting change
introduced in the same commit.
[BZ 15846] As discussed in the recent thread on my $EXEC_ORIGIN patch
and in BZ 15846, getauxval() presently has no unambiguous way of
reporting an error condition. It currently returns zero on error, but
this may also be a valid result for some auxv entries. As there is no
clear invalid result for all current and future auxv entries, this patch
sets errno (following a suggestion in the BZ entry).
This version of the patch also adds documentation and tests for the
value-not-found conditions in getauxval().
This is needed for version-3 tz-format files; it supports time
stamps past 2037 for America/Godthab (the only entry in the tz
database for which this change is relevant).
* manual/time.texi (TZ Variable): Document transition times
from -167:59:59 through -00:00:01.
* time/tzset.c (tz_rule): Time of day is now signed.
(__tzset_parse_tz): Parse negative time of day.
* manual/time.texi (TZ Variable): Document transition times from
25:00:00 through 167:59:59. These are already supported, and this
support will help with version-3 tz-format files.
ChangeLog:
2013-12-16 Will Newton <will.newton@linaro.org>
* manual/memory.texi (Malloc Examples): Mention aligned_alloc.
(Aligned Memory Blocks): Add documentation for aligned_alloc
and suggest it as an alternative to posix_memalign.
(Hooks for Malloc): Document __memalign_hook is also called
for aligned_alloc. (Summary of Malloc): Add summary for
aligned alloc. Document __memalign_hook is also called
for aligned_alloc.
The current documentation suggests using memalign and valloc which
are now considered obsolete, so suggest using posix_memalign instead.
Also document the possible error return and errno values for memalign
and posix_memalign and improve documentation of __memalign_hook.
ChangeLog:
2013-12-16 Will Newton <will.newton@linaro.org>
* manual/memory.texi (Malloc Examples): Clarify default
alignment documentation. Suggest posix_memalign rather
than memalign or valloc.
(Aligned Memory Blocks): Remove suggestion to use memalign
or valloc. Remove obsolete comment about BSD.
Document memalign errno values and mark the function obsolete.
Document posix_memalign returned error codes. Mark valloc
as obsolete. (Hooks for Malloc): __memalign_hook is also
called for posix_memalign and valloc.
(Summary of Malloc): Add posix_memalign to function summary.
__memalign_hook is also called for posix_memalign and valloc.
The register keyword doesn't add any information to the examples
and is not useful for modern compilers.
ChangeLog:
2013-11-06 Will Newton <will.newton@linaro.org>
* manual/memory.texi (Malloc Examples): Remove register
keyword from examples.
Autoconf has been deprecating configure.in for quite a long time.
Rename all our configure.in and preconfigure.in files to .ac.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The Secure RPC implementation in glibc uses DES encryption
during authentication of the user. This use of DES means
that anyone using Sun RPC will likely not be compliant
with FIPS 140-2 which forbids the use of DES.
One solution to the compliance issue is to disable AUTH_DES
and AUTH_KERB, both use DES, when in FIPS compliance mode.
This is not a good idea because it disables all of the even
mildly secure methods of authentication allowing only plain
text methods.
Instead we leave AUTH_DES and AUTH_KERB enabled in FIPS
compliance mode and document the compliance issue in the
manual. FIPS allows this, that is to say that if you can't
fix it you must document the non-compliance.
This commit adds documentation to that effect in the
"DES encryption and password handling" section of the
manual.
Add systemtap probes to various slow paths in libm so that application
developers may use systemtap to find out if their applications are
hitting these slow paths. We have added probes for pow, exp, log,
tan, atan and atan2.
for ChangeLog
* malloc/arena.c (new_heap): New memory_heap_new probe.
(grow_heap): New memory_heap_more probe.
(shrink_heap): New memory_heap_less probe.
(heap_trim): New memory_heap_free probe.
* malloc/malloc.c (sysmalloc): New memory_sbrk_more probe.
(systrim): New memory_sbrk_less probe.
* manual/probes.texi: Document them.
The end of the "Parsing of Floats" subsection currently reads:
The GNU C Library also provides '_l' versions of these functions,
which take an additional argument, the locale to use in conversion.
*Note Parsing of Integers::.
Split the final note as it is unrelated to the above comment and
reference it with "See also" instead.
The pt-chown binary is discussed in the "Running make install" section
without clarification of the needed configure option. Clarify this
and simplfy the discription which is already covered in the "Configuring
and compiling" section.
The helper binary pt_chown tricked into granting access to another
user's pseudo-terminal.
Pre-conditions for the attack:
* Attacker with local user account
* Kernel with FUSE support
* "user_allow_other" in /etc/fuse.conf
* Victim with allocated slave in /dev/pts
Using the setuid installed pt_chown and a weak check on whether a file
descriptor is a tty, an attacker could fake a pty check using FUSE and
trick pt_chown to grant ownership of a pty descriptor that the current
user does not own. It cannot access /dev/pts/ptmx however.
In most modern distributions pt_chown is not needed because devpts
is enabled by default. The fix for this CVE is to disable building
and using pt_chown by default. We still provide a configure option
to enable hte use of pt_chown but distributions do so at their own
risk.
It is the magnitude of the return value which lies
in [0.5, 1), not the return value itself.
---
2013-05-28 Ben North <ben@redfrontdoor.org>
* manual/arith.texi (frexp): It is the magnitude of the return
value which lies in [0.5, 1), not the return value itself.
Rewrite the first paragraph to talk about users not humans,
and to use correct English.
Clarify that it is the mapping of messages to IDs that
impacts the design of the message translation API.
---
2013-05-07 Carlos O'Donell <carlos@redhat.com>
* manual/message.texi (Message Translation): Talk about users.
Message to key mapping impacts design.
This adds the base chapter for POSIX threads and also documentation
for thread-specific data, along with a note on its interaction with
C++11 thread_local variables.
Surround the "Detailed Node Listing" section of the info page menu with
@detailmenu flags to avoid confusing texinfo. Resolves a large number
of warnings printed by texinfo-5.0.
The glob flags page reads as if this section is comprehensive when it
is not -- a lot of GNU extensions exist. Point that out in the intro.
Reviewed-by: Carlos O'Donell <carlos@systemhalted.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The More Flags for Globbing section indirectly mentions gl_flags when
talking about GLOB_MAGCHAR. Mention it explicitly when covering the
glob_t types.
Reviewed-by: Carlos O'Donell <carlos@systemhalted.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
