Likewise use __builtin_LINE instead of __LINE__.
When building C++, inline functions are required to have the exact same
sequence of tokens in every translation unit. But __FILE__ token, when
used in a header file, does not necessarily expand to the exact same
string literal, and that may cause compilation failure when C++ modules
are being used. (It would also cause unpredictable output on assertion
failure at runtime, but this rarely matters in practice.)
For example, given the following sources:
// a.h
#include <assert.h>
inline void fn () { assert (0); }
// a.cc
#include "a.h"
// b.cc
#include "foo/../a.h"
preprocessing a.cc will yield a call to __assert_fail("0", "a.h", ...)
but b.cc will yield __assert_fail("0", "foo/../a.h", ...)
Rename atomic_exchange_rel/acq to use atomic_exchange_release/acquire
since these map to the standard C11 atomic builtins.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
C2x makes static_assert and thread_local into keywords, removing the
definitions as macros in assert.h and threads.h. Thus, disable those
macros in those glibc headers for C2x.
The disabling is done based on a combination of language version and
__GNUC_PREREQ, *not* based on __GLIBC_USE (ISOC2X), on the principle
that users of the header (when requesting C11 or later APIs - not
assert.h for C99 and older API versions) should always have the names
static_assert or thread_local available after inclusion of the header,
whether as a keyword or as a macro. Thus, when using a compiler
without the keywords (whether an older compiler, possibly in C2x mode,
or _GNU_SOURCE with any compiler but in an older language mode, for
example) the macros should be defined, even when C2x APIs have been
requested. The __GNUC_PREREQ conditionals here may well need updating
with the versions of other compilers that gained support for these
keywords in C2x mode.
Tested for x86_64.
Redirect internal assertion failures to __libc_assert_fail, based on
based on __libc_message, which writes directly to STDERR_FILENO
and calls abort. Also disable message translation and reword the
error message slightly (adjusting stdlib/tst-bz20544 accordingly).
As a result of these changes, malloc no longer needs its own
redefinition of __assert_fail.
__libc_assert_fail needs to be stubbed out during rtld dependency
analysis because the rtld rebuilds turn __libc_assert_fail into
__assert_fail, which is unconditionally provided by elf/dl-minimal.c.
This change is not possible for the public assert macro and its
__assert_fail function because POSIX requires that the diagnostic
is written to stderr.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
Building tests with -DNDEBUG in CFLAGS, gcc 9.2.1 issues the following error:
tst-assert-c++.cc: In function ‘int do_test()’:
tst-assert-c++.cc:66:12: error: unused variable ‘value’ [-Werror=unused-variable]
66 | no_int value;
| ^~~~~
tst-assert-c++.cc:71:18: error: unused variable ‘value’ [-Werror=unused-variable]
71 | bool_and_int value;
| ^~~~~
The assert has been disabled by building glibc with CFLAGS, CXXFLAGS,
and CPPFLAGS with -DNDEBUG which removes the assert and leaves the
value unused.
We never want the assert disabled because that's the point of the
test, so we undefine NDEBUG before including assert.h to ensure that
we get assert correctly defined.
tests-unsupported has to be defined before the inclusion of Rules in a
subdirectory Makefile; otherwise it is ineffective. This patch fixes
the ordering in assert/Makefile, where a recent test addition put
tests-unsupported too late (resulting in build failures when the C++
compiler was missing or broken, and thereby showing up the unrelated
bug 21987).
Incidentally, I don't see why these tests depend on
$(have-cxx-thread_local) rather than just a working C++ compiler.
Tested in such a configuration (broken compiler/libstdc++) with
build-many-glibcs.py.
* assert/Makefile [$(have-cxx-thread_local)]: Move conditional
variable definitions above inclusion of ../Rules.
* assert/assert.h (assert): Rewrite assert's definition so that
a s/==/=/ typo, e.g., assert(errno = ENOENT) is not hidden from
gcc's -Wparentheses by assert-added parentheses. The new definition
uses "if (expr) /* empty */; else __assert_fail...", so
gcc -Wall will now detect that type of error in an assert, too.
The __STRICT_ANSI__ disjunct is to make this work also with both
-ansi and -pedantic, which would reject the use of ({...}).
I would have preferred to use __extension__ to mark that, but
doing so would mistakenly suppress warnings about any extension
in the user-supplied "expr".
E.g., "assert ( ({1;}) )" must continue to evoke a warning.
Various glibc build / install / test code has C locale settings that
are redundant with LC_ALL=C.
LC_ALL takes precedence over LANG, so anywhere that sets LC_ALL=C
(explicitly, or through it being in the default environment for
running tests) does not need to set LANG=C. LC_ALL=C also takes
precedence over LANGUAGE, since
2001-01-02 Ulrich Drepper <drepper@redhat.com>
* intl/dcigettext.c (guess_category_value): Rewrite so that LANGUAGE
value is ignored if the selected locale is the C locale.
* intl/tst-gettext.c: Set locale for above change.
* intl/tst-translit.c: Likewise.
and so settings of LANGUAGE=C are also redundant when LC_ALL=C is
set. One test also had LC_ALL=C in its -ENV setting, although it's
part of the default environment used for tests.
This patch removes the redundant settings. It removes a suggestion in
install.texi of setting LANGUAGE=C LC_ALL=C for "make install"; the
Makefile.in target "install" already sets LC_ALL_C so there's no need
for the user to set it (and nor should there be any need for the user
to set it).
If some build machine tool used by "make install" uses a version of
libintl predating that 2001 change, and the user has LANGUAGE set, the
removal of LANGUAGE=C from the Makefile.in "install" rule could in
principle affect the user's installation. However, I don't think we
need to be concerned about pre-2001 build tools.
Tested x86_64.
* Makefile (install): Don't set LANGUAGE.
* Makefile.in (install): Likewise.
* assert/Makefile (test-assert-ENV): Remove variable.
(test-assert-perr-ENV): Likewise.
* elf/Makefile (neededtest4-ENV): Likewise.
* iconvdata/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Don't set LANGUAGE.
* io/ftwtest-sh (LANG): Remove variable.
* libio/Makefile (tst-widetext-ENV): Likewise.
* manual/install.texi (Running make install): Don't refer to
environment settings for make install.
* INSTALL: Regenerated.
* nptl/tst-tls6.sh: Don't set LANG.
* posix/globtest.sh (LANG): Remove variable.
* string/Makefile (tester-ENV): Likewise.
(inl-tester-ENV): Likewise.
(noinl-tester-ENV): Likewise.
* sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Don't set LANGUAGE.
* timezone/Makefile (build-testdata): Use $(built-program-cmd)
without explicit environment settings.
localedata/ChangeLog:
* tst-fmon.sh: Don't set LANGUAGE.
* tst-locale.sh: Likewise.
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I
noted it was necessary to add includes of Makeconfig early in various
subdirectory makefiles for the tests-special variable settings added
by that patch to be conditional on configuration information. No-one
commented on the general question there of whether Makeconfig should
always be included immediately after the definition of subdir.
This patch implements that early inclusion of Makeconfig in each
directory (which is a lot easier than consistent placement of includes
of Rules). Includes are added if needed, or moved up if already
present. Subdirectory "all:" targets are removed, since Makeconfig
provides one.
There is potential for further cleanups I haven't done. Rules and
Makerules have code such as
ifneq "$(findstring env,$(origin headers))" ""
headers :=
endif
to override to empty any value of various variables that came from the
environment. I think there is a case for Makeconfig setting all the
subdirectory variables (other than subdir) to empty to ensure no
outside value is going to take effect if a subdirectory fails to
define a variable. (A list of such variables, possibly out of date
and incomplete, is in manual/maint.texi.) Rules and Makerules would
give errors if Makeconfig hadn't already been included, instead of
including it themselves. The special code to override values coming
from the environment would then be obsolete and could be removed.
Tested x86_64, including that installed binaries are identical before
and after the patch.
* argp/Makefile: Include Makeconfig immediately after defining
subdir.
* assert/Makefile: Likewise.
* benchtests/Makefile: Likewise.
* catgets/Makefile: Likewise.
* conform/Makefile: Likewise.
* crypt/Makefile: Likewise.
* csu/Makefile: Likewise.
(all): Remove target.
* ctype/Makefile: Include Makeconfig immediately after defining
subdir.
* debug/Makefile: Likewise.
* dirent/Makefile: Likewise.
* dlfcn/Makefile: Likewise.
* gmon/Makefile: Likewise.
* gnulib/Makefile: Likewise.
* grp/Makefile: Likewise.
* gshadow/Makefile: Likewise.
* hesiod/Makefile: Likewise.
* hurd/Makefile: Likewise.
(all): Remove target.
* iconvdata/Makefile: Include Makeconfig immediately after
defining subdir.
* inet/Makefile: Likewise.
* intl/Makefile: Likewise.
* io/Makefile: Likewise.
* libio/Makefile: Likewise.
(all): Remove target.
* locale/Makefile: Include Makeconfig immediately after defining
subdir.
* login/Makefile: Likewise.
* mach/Makefile: Likewise.
(all): Remove target.
* malloc/Makefile: Include Makeconfig immediately after defining
subdir.
(all): Remove target.
* manual/Makefile: Include Makeconfig immediately after defining
subdir.
* math/Makefile: Likewise.
* misc/Makefile: Likewise.
* nis/Makefile: Likewise.
* nss/Makefile: Likewise.
* po/Makefile: Likewise.
(all): Remove target.
* posix/Makefile: Include Makeconfig immediately after defining
subdir.
* pwd/Makefile: Likewise.
* resolv/Makefile: Likewise.
* resource/Makefile: Likewise.
* rt/Makefile: Likewise.
* setjmp/Makefile: Likewise.
* shadow/Makefile: Likewise.
* signal/Makefile: Likewise.
* socket/Makefile: Likewise.
* soft-fp/Makefile: Likewise.
* stdio-common/Makefile: Likewise.
* stdlib/Makefile: Likewise.
* streams/Makefile: Likewise.
* string/Makefile: Likewise.
* sunrpc/Makefile: Likewise.
(all): Remove target.
* sysvipc/Makefile: Include Makeconfig immediately after defining
subdir.
* termios/Makefile: Likewise.
* time/Makefile: Likewise.
* timezone/Makefile: Likewise.
(all): Remove target.
* wcsmbs/Makefile: Include Makeconfig immediately after defining
subdir.
* wctype/Makefile: Likewise.
libidn/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
localedata/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
(all): Remove target.
nptl/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
nptl_db/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
The terminal output etc is not visible in a core file. The new
libc-internal variable __abort_msg will point to a string with the
message which has been printed before the abort in case abort is
called from inside libc. BZ #10217
* sysdeps/mach/hurd/pwrite64.c: No libc_hidden_def (__libc_pwrite64).
* sysdeps/mach/hurd/dl-sysdep.c (__GI_abort): Define alias for abort.
* include/assert.h (__assert_perror_fail): Declare it, do hidden_proto.
* assert/assert-perr.c: Add libc_hidden_def.
* elf/dl-minimal.c [! NDEBUG] (__assert_perror_fail): New function.
* sysdeps/gnu/errlist-compat.awk: Don't fail if there are no versions
found at all.
* sysdeps/gnu/Versions: File removed. Moved all #errlist-compat
sys_errlist stuff to ...
* sysdeps/unix/sysv/linux/Versions: ... here.
* mach/mach.h: Include <features.h>.
2002-08-03 Ulrich Drepper <drepper@redhat.com>
* assert/assert.c: Use hidden_def not INTDEF.
2002-08-03 Jakub Jelinek <jakub@redhat.com>
* include/libc-symbols.h: Optimize if HAVE_BROKEN_ALIAS_ATTRIBUTE is
not defined.
