These variables are only used to determine if a stdio stream is
a pre-allocated stream, but it is possible to do so by comparing
a FILE * to all pre-allocated stream objects. As a result, it is
not necessary to keep those pointers in separate variables.
Behavior with symbol interposition is unchanged because _IO_stdin_,
_IO_stdout_, _IO_stderr_ are exported, and refer to objects outside of
libc if symbol interposition or copy relocations are involved. (The
removed variables _IO_stdin, _IO_stdout, _IO_stderr were not exported,
of course.)
From time to time the test misc/tst-clone3 fails with a timeout.
Then futex_wait is blocking. Usually ctid should be set to zero
due to CLONE_CHILD_CLEARTID and the futex should be waken up.
But the fail occures if the thread has already exited before
ctid is set to the return value of clone(). Then futex_wait() will
block as there will be nobody who wakes the futex up again.
This patch initializes ctid to a known value before calling clone
and the kernel is the only one who updates the value to zero after clone.
If futex_wait is called then it is either waked up due to the exited thread
or the futex syscall fails as *ctid_ptr is already zero instead of the
specified value 1.
ChangeLog:
* sysdeps/unix/sysv/linux/tst-clone3.c (do_test):
Initialize ctid with a known value and remove update of ctid
after clone.
(wait_tid): Adjust arguments and call futex_wait with ctid_val
as assumed current value of ctid_ptr.
If building on a subset of architectures only, it is easy to miss
wrapper headers which are required by other architectures because
they lack the corresponding sysdeps header. The check ensures
that every installed header which is not itself a sysdeps header
has a header under include/ (that presumably wraps the header,
and perhaps also adding declarations and definitions for !_ISOMAC).
Also check for the absence of the sysdeps/generic/bits directory
removed in commit c72565e5f1, to make
accidental re-introduction more difficult.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
With a complete set of wrapper headers, it will be possible to check
for automatically for new installed headers which lack such wrappers.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
sys/procfs.h was already using this sysdeps directory.
This avoids the need for nptl-specific wrapper headers under
include/, a generic location in the source tree.
With internal fcntl64 internal (commit 06ab719d), it is possible to
consolidate lockf implementation by using the LFS fcntl interface
instead of using arch and system-specific implementations.
For Linux, the i386 implementation is used as generic implementation
by replacing the direct syscall with fcntl64 call. The LFS symbol
alias for default LFS ABI (__OFF_T_MATCHES_OFF64_T) is used to avoid
the duplicate symbol (instead of overriding the implementation with an
empty file).
For Hurd lockf64 semantic is changed: previous generic lockf64
implementation returned EOVERFLOW if LEN input is larger than 32-bit
off_t. However, Hurd fcntl64 implementation for F_GETLK64, F_SETLK64,
and F_SETLKW64 do accept off64_t inputs (__f_setlk accepts only off64_t
inputs).
Checked on i686-linux-gnu and x86_64-linux-gnu along with a i686-gnu
build.
* io/Makefile (tests): Add tst-lockf.
* io/lockf.c (lockf): Use __fcntl and only define for
!__OFF_T_MATCHES_OFF64_T.
* io/lockf64.c (__lockf64): Call __fcntl64 and alias to lockf for
__OFF_T_MATCHES_OFF64_T case.
* io/tst-lockf.c: New file.
* sysdeps/unix/sysv/linux/i386/lockf64.c: Remove file.
* sysdeps/unix/sysv/linux/arm/lockf64.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/lockf64.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/lockf64.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/lockf64.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/lockf64.c: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/lockf64.c: Likewise.
* sysdeps/unix/sysv/linux/sh/lockf64.c: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/lockf64.c: Likewise.
After commit f1ac745583 ("arm: Use "nr"
constraint for Systemtap probes [BZ #24164]"), we load pd->result into
a register in the probe below:
/* Free the TCB. */
__free_tcb (pd);
}
else
pd->joinid = NULL;
LIBC_PROBE (pthread_join_ret, 3, threadid, result, pd->result);
However, at this point, the thread descriptor has been freed. If the
thread stack does not fit into the thread stack cache, the memory will
have been unmapped, and the program will crash in the probe.
Building the testsuite with -Wextra produces a warning in
sunrpc/tst-svc_register.c for a useless qualifier on a function return
type. This patch removes that qualifier.
Tested for x86_64.
* sunrpc/tst-svc_register.c (rpcbind_address): Remove qualifier
from function return type.
Building the testsuite with -Wextra (together with
-Wno-cast-function-type -Wno-clobbered -Wno-expansion-to-defined
-Wno-missing-field-initializers -Wno-old-style-declaration
-Wno-shift-negative-value -Wno-sign-compare -Wno-type-limits
-Wno-unused-parameter, which reflect the set of -Wextra warnings for
which glibc itself is not currently clean on x86_64) showed up
implicit-fallthrough warnings in tst-setjmp.c. Those warnings appear
to be false positives, arising from a function "jump" that calls
longjmp not itself being marked as noreturn; thus, this patch adds the
noreturn marking to that function to fix the warnings.
Tested for x86_64.
* setjmp/tst-setjmp.c (jump): Use __attribute__ ((__noreturn__)).
In some cases, sensitive to readline version and the user's
environment, gdb might emit escape codes while run under python's
pexpect (i.e. testing pretty printers). This patch, suggested
by Jan, helps isolate the test from the user's environment.
Tested on RHEL 7 x86_64 with DTS 7 and EPEL, which is one
magic combination of components that triggers this bug.
This patch fixes implicit-fallthrough warnings in sunrpc/xdr.c when
building with -Wextra. A fall-through comment is added in three
places; in two other places, an existing comment is reworded so it
matches the default patterns used by -Wimplicit-fallthrough.
Tested for x86_64.
* sunrpc/xdr.c (xdr_int): Add fall-through comment.
(xdr_u_int): Likewise.
(xdr_enum): Likewise.
(xdr_bytes): Reword fall-through comment.
(xdr_string): Likewise.
Patch ce7eb0e903 ("nptl: Cleanup cancellation macros") changed the
join sequence for internal common __pthread_timedjoin_ex to use the
new macro lll_wait_tid. The idea was this macro would issue the
cancellable futex operation depending whether the timeout is used or
not. However if a timeout is used, __lll_timedwait_tid is called and
it is not a cancellable entrypoint.
This patch fixes it by simplifying the code in various ways:
- Instead of adding the cancellation handling on __lll_timedwait_tid,
it moves the generic implementation to pthread_join_common.c (called
now timedwait_tid with some fixes to use the correct type for pid).
- The llvm_wait_tid macro is removed, along with its replication on
x86_64, i686, and sparc arch-specific lowlevellock.h.
- sparc32 __lll_timedwait_tid is also removed, since the code is similar
to generic one.
- x86_64 and i386 provides arch-specific __lll_timedwait_tid which is
also removed since they are similar in functionality to generic C code
and there is no indication it is better than compiler generated code.
New tests, tst-join8 and tst-join9, are provided to check if
pthread_timedjoin_np acts as a cancellation point.
Checked on x86_64-linux-gnu, i686-linux-gnu, sparcv9-linux-gnu, and
aarch64-linux-gnu.
[BZ #24215]
* nptl/Makefile (lpthread-routines): Remove lll_timedwait_tid.
(tests): Add tst-join8 tst-join9.
* nptl/lll_timedwait_tid.c: Remove file.
* sysdeps/sparc/sparc32/lll_timedwait_tid.c: Likewise.
* sysdeps/unix/sysv/linux/i386/lll_timedwait_tid.c: Likewise.
* sysdeps/sysv/linux/x86_64/lll_timedwait_tid.c: Likewise.
* nptl/pthread_join_common.c (timedwait_tid): New function.
(__pthread_timedjoin_ex): Act as cancellation entrypoint is block
is set.
* nptl/tst-join5.c (thread_join): New function.
(tf1, tf2, do_test): Use libsupport and add pthread_timedjoin_np
check.
* nptl/tst-join8.c: New file.
* nptl/tst-join9.c: Likewise.
* sysdeps/nptl/lowlevellock-futex.h (lll_futex_wait_cancel,
lll_futex_timed_wait_cancel): Add generic macros.
* sysdeps/nptl/lowlevellock.h (__lll_timedwait_tid, lll_wait_tid):
Remove definitions.
* sysdeps/unix/sysv/linux/i386/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/x86_64/lowlevellock.h: Likewise.
* sysdeps/sparc/sparc32/lowlevellock.c (__lll_timedwait_tid):
Remove function.
* sysdeps/unix/sysv/linux/i386/lowlevellock.S (__lll_timedwait_tid):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/lowlevellock.S: Likewise.
* sysdeps/unix/sysv/linux/lowlevellock-futex.h
(lll_futex_timed_wait_cancel): New macro.
Add a malloc micro benchmark to enable accurate testing of the
various paths in malloc and free. The benchmark does a varying
number of allocations of a given block size, then frees them again.
It tests 3 different scenarios: single-threaded using main arena,
multi-threaded using thread-arena, main arena with SINGLE_THREAD_P
false.
* benchtests/Makefile: Add malloc-simple benchmark.
* benchtests/bench-malloc-simple.c: New benchmark.
The ORIG_SRC argument is likely a useless relic from the original
correctness tests that are not needed in the benchmarks. Remove the
argument and use S1 to point to the source to avoid confusion.
* benchtests/bench-memmove.c (do_one_test): Remove unused
ORIG_SRC.
(do_test): Adjust.
* benchtests/bench-memmove-large.c (do_one_test): Remove unused
ORIG_SRC.
(do_test): Adjust.
The clone.S patch fixes 2 elfutils testsuite unwind failures, where the
backtrace gets stuck repeating __thread_start until we hit the backtrace
limit. This was confirmed by building and installing a patched glibc and
then building elfutils and running its testsuite.
Unfortunately, the testcase isn't working as expected and I don't know why.
The testcase passes even when my clone.S patch is not installed. The testcase
looks logically similarly to the elfutils testcases that are failing. Maybe
there is a subtle difference in how the glibc unwinding works versus the
elfutils unwinding? I don't have good gdb pthread support yet, so I haven't
found a way to debug this. Anyways, I don't know if the testcase is useful or
not. If the testcase isn't useful then maybe the clone.S patch is OK without
a testcase?
Jim
[BZ #24040]
* elf/Makefile (CFLAGS-tst-unwind-main.c): Add -DUSE_PTHREADS=0.
* elf/tst-unwind-main.c: If USE_PTHEADS, include pthread.h and error.h
(func): New.
(main): If USE_PTHREADS, call pthread_create to run func. Otherwise
call func directly.
* nptl/Makefile (tests): Add tst-unwind-thread.
(CFLAGS-tst-unwind-thread.c): Define.
* nptl/tst-unwind-thread.c: New file.
* sysdeps/unix/sysv/linux/riscv/clone.S (__thread_start): Mark ra
as undefined.
In two places in glibc, -Wextra produces implicit-fallthrough warnings
where there are comments about the fall-through but their wording
doesn't match one of the forms expected by the default
implicit-fallthrough level. This patch adjusts those two places to
have a comment in a form that is accepted, so avoiding the warning
(this seems preferable to only being able to use a looser level of the
warning that allows any comment at all as evidence of deliberate
fall-through).
Tested for x86_64.
* iconvdata/cns11643.h (ucs4_to_cns11643): Adjust fall-through
comment wording.
* nis/nis_call.c (__do_niscall3): Likewise.
One group of warnings seen building glibc with -Wextra is -Wempty-body
warnings about an 'if' body (or in one case an 'else' body) that is
just a semicolon, "warning: suggest braces around empty body in an
'if' statement [-Wempty-body]" - I think the point of the warning
being to make it more visible whether an 'if' body is actually present
or not.
This patch fixes such warnings in glibc. There's one place, with a
semicolon at the end of a comment, where this is clearly making the
presence of an 'else' body more visible. The other cases involve
macro definitions expanding to nothing. While there's no issue there
with visibility at the call sites, I think it's still cleaner to have
a macro that expands to something nonempty appropriate for the context
- so do {} while (0) if it's only intended to be usable as a
statement, or ((void) 0) where the macro definition is an alternative
to a call to a function returning void, so this patch makes those
changes.
Tested for x86_64.
* catgets/gencat.c (normalize_line): Use braces around empty
'else' body.
* include/stap-probe.h [!USE_STAP_PROBE && !__ASSEMBLER__]
(STAP_PROBE0): Use do {} while (0) for do-nothing definition.
[!USE_STAP_PROBE && !__ASSEMBLER__] (STAP_PROBE1): Likewise.
[!USE_STAP_PROBE && !__ASSEMBLER__] (STAP_PROBE2): Likewise.
[!USE_STAP_PROBE && !__ASSEMBLER__] (STAP_PROBE3): Likewise.
[!USE_STAP_PROBE && !__ASSEMBLER__] (STAP_PROBE4): Likewise.
* libio/libio.h (_IO_funlockfile): Use ((void) 0) for do-nothing
definition.
One of the implicit-fallthrough warnings from compiling glibc with
-Wextra appears to indicate an actual bug: the test-container code
could fall through inappropriately if execlp returns (which only
occurs on error). This patch adds appropriate error handling in this
case to avoid that fall-through.
Tested for x86_64.
* support/test-container.c (recursive_remove): Use FAIL_EXIT1 if
execlp returns.
This change moves the audit module loading and early notification into
separate functions out of dl_main.
It restores the bug fix from commit
8e889c5da3 ("elf: Fix LD_AUDIT for
modules with invalid version (BZ#24122)") which was reverted in commit
83e6b59625 ("[elf] Revert 8e889c5da3
(BZ#24122)").
The actual bug fix is the separate error message for the case when
la_version returns zero. The dynamic linker error message (which is
NULL in this case) is no longer used. Based on the intended use of
version zero (ignore this module due to explicit request), the message
is only printed if debugging is enabled.
This patch adds fall-through comments in some cases where -Wextra
produces implicit-fallthrough warnings.
The patch is non-exhaustive. Apart from architecture-specific code
for non-x86_64 architectures, it does not change sunrpc/xdr.c (legacy
code, probably should have such changes, but left to be dealt with
separately), or places that already had comments about the
fall-through but not matching the form expected by
-Wimplicit-fallthrough=3 (the default level with -Wextra; my
inclination is to adjust those comments to match rather than
downgrading to -Wimplicit-fallthrough=1 to allow any comment), or one
place where I thought the implicit fallthrough was not correct and so
should be handled separately as a bug fix. I think the key thing to
consider in review of this patch is whether the fall-through is indeed
intended and correct in each place where such a comment is added.
Tested for x86_64.
* elf/dl-exception.c (_dl_exception_create_format): Add
fall-through comments.
* elf/ldconfig.c (parse_conf_include): Likewise.
* elf/rtld.c (print_statistics): Likewise.
* locale/programs/charmap.c (parse_charmap): Likewise.
* misc/mntent_r.c (__getmntent_r): Likewise.
* posix/wordexp.c (parse_arith): Likewise.
(parse_backtick): Likewise.
* resolv/ns_ttl.c (ns_parse_ttl): Likewise.
* sysdeps/x86/cpu-features.c (init_cpu_features): Likewise.
* sysdeps/x86_64/dl-machine.h (elf_machine_rela): Likewise.
The type used within e_sqrt.c(__slow_ieee754_sqrtf) was, unnecessarily and
likely inadvertently, double. float is not only appropriate, but also
more efficient, avoiding the need for the compiler to emit a
round-to-single-precision instruction.
This is the difference in compiled code:
0000000000000000 <__ieee754_sqrtf>:
0: 2c 08 20 ec fsqrts f1,f1
- 4: 18 08 20 fc frsp f1,f1
- 8: 20 00 80 4e blr
+ 4: 20 00 80 4e blr
(Found by Anton Blanchard.)
Having checked the arrangement of whitespace in time/strftime_l.c
using "unexpand" and "unexpand -a" command, three inconsistencies are
detected. So fix them for consistency.
ChangeLog:
* time/strftime_l.c: Fix a few whitespace arrangement inconsistencies.
Continuing the process of moving away from having bits/mathinline.h
headers in glibc, leaving the compiler to inline functions as
appropriate depending on the options passed to it, this patch removes
the header for powerpc.
<https://gcc.gnu.org/bugzilla/show_bug.cgi?id=88558> is the
corresponding GCC bug for adding replacements for these powerpc
(32-bit-only) lrint / lrintf inlines.
Tested with build-many-glibcs.py for its powerpc configurations.
* sysdeps/powerpc/bits/mathinline.h: Remove.
sysdeps/ia64/fpu/bits/math-finite.h exists and will be installed on
ia64, but during the build, the default math/bits/math-finite.h file
is used, which is wrong.
Fixes commit 0ac5ae2335 ("Optimize
libm").
No functional change; the previous path worked as well, but it
re-added the obsolete sysdeps/generic/bits directory, which was
removed (for the first time) in commit
c72565e5f1.
Fixes commit e47d82c99a ("Provide
<bits/unistd_ext.h> as a sysdeps header exclusively").
When the /etc/hosts file has a line longer than 1028
characters getent ahostsv4 and ahostsv6 will fail.
This test performs a getent call on a /etc/hosts file that contains
a very long line (greater than 1028) using the test-in-container
framework.
Non-sysdeps headers cannot be overriden by sysdeps headers across the
entire build, so it is necessary to turn such extension headers into
sysdeps headers themselves. The approach here follows the existing
<bits/shm.h> header (although it uses sysdeps/gnu instead of
sysdeps/generic).
Fixes commit 1d0fc21382 ("Linux: Add
gettid system call wrapper [BZ #6399]") and commit
8f89ab216f ("posix: Fix missing wrapper
header for <bits/unistd_ext.h>").
Commit 27761a1042 ("Refactor atfork
handlers") introduced a lock, atfork_lock, around fork handler list
accesses. It turns out that this lock occasionally results in
self-deadlocks in malloc/tst-mallocfork2:
(gdb) bt
#0 __lll_lock_wait_private ()
at ../sysdeps/unix/sysv/linux/x86_64/lowlevellock.S:63
#1 0x00007f160c6f927a in __run_fork_handlers (who=(unknown: 209394016),
who@entry=atfork_run_prepare) at register-atfork.c:116
#2 0x00007f160c6b7897 in __libc_fork () at ../sysdeps/nptl/fork.c:58
#3 0x00000000004027d6 in sigusr1_handler (signo=<optimized out>)
at tst-mallocfork2.c:80
#4 sigusr1_handler (signo=<optimized out>) at tst-mallocfork2.c:64
#5 <signal handler called>
#6 0x00007f160c6f92e4 in __run_fork_handlers (who=who@entry=atfork_run_parent)
at register-atfork.c:136
#7 0x00007f160c6b79a2 in __libc_fork () at ../sysdeps/nptl/fork.c:152
#8 0x0000000000402567 in do_test () at tst-mallocfork2.c:156
#9 0x0000000000402dd2 in support_test_main (argc=1, argv=0x7ffc81ef1ab0,
config=config@entry=0x7ffc81ef1970) at support_test_main.c:350
#10 0x0000000000402362 in main (argc=<optimized out>, argv=<optimized out>)
at ../support/test-driver.c:168
If no locking happens in the single-threaded case (where fork is
expected to be async-signal-safe), this deadlock is avoided.
(pthread_atfork is not required to be async-signal-safe, so a fork
call from a signal handler interrupting pthread_atfork is not
a problem.)
This commit adds gettid to <unistd.h> on Linux, and not to the
kernel-independent GNU API.
gettid is now supportable on Linux because too many things assume a
1:1 mapping between libpthread threads and kernel threads.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
As the result of commit 6e6249d0b4
("BZ#14743: Move clock_* symbols from librt to libc."), in glibc 2.17,
clock_gettime, clock_getres, clock_settime, clock_getcpuclockid,
clock_nanosleep were added to libc, and the file rt/clock-compat.c
was added with forwarders to the actual implementations in libc.
These forwarders were wrapped in
#if SHLIB_COMPAT (librt, GLIBC_2_2, GLIBC_2_17)
so that they are not present for newer architectures (such as
powerpc64le) with a 2.17 or later ABI baseline. But the forwarders
were not marked as compatibility symbols. As a result, on older
architectures, historic configure checks such as
AC_CHECK_LIB(rt, clock_gettime)
still cause linking against librt, even though this is completely
unnecessary. It also creates a needless porting hazard because
architectures behave differently when it comes to symbol availability.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
While debugging a kernel warning, Thomas Gleixner, Sebastian Sewior and
Heiko Carstens found a bug in pthread_mutex_trylock due to misordered
instructions:
140: a5 1b 00 01 oill %r1,1
144: e5 48 a0 f0 00 00 mvghi 240(%r10),0 <--- THREAD_SETMEM (THREAD_SELF, robust_head.list_op_pending, NULL);
14a: e3 10 a0 e0 00 24 stg %r1,224(%r10) <--- last THREAD_SETMEM of ENQUEUE_MUTEX_PI
vs (with compiler barriers):
140: a5 1b 00 01 oill %r1,1
144: e3 10 a0 e0 00 24 stg %r1,224(%r10)
14a: e5 48 a0 f0 00 00 mvghi 240(%r10),0
Please have a look at the discussion:
"Re: WARN_ON_ONCE(!new_owner) within wake_futex_pi() triggerede"
(https://lore.kernel.org/lkml/20190202112006.GB3381@osiris/)
This patch is introducing the same compiler barriers and comments
for pthread_mutex_trylock as introduced for pthread_mutex_lock and
pthread_mutex_timedlock by commit 8f9450a0b7
"Add compiler barriers around modifications of the robust mutex list."
ChangeLog:
[BZ #24180]
* nptl/pthread_mutex_trylock.c (__pthread_mutex_trylock):
Do not use a statement expression in array_length, so that
array_length can be used at file scope and as a constant expression.
Instead, put the _Static_assert into a struct (as a declaration),
and nest this in the expression using a sizeof expression.
One group of warnings seen with -Wextra is warnings for static or
inline not at the start of a declaration (-Wold-style-declaration).
This patch fixes various such cases for inline, ensuring it comes at
the start of the declaration (after any static). A common case of the
fix is "static inline <type> __always_inline"; the definition of
__always_inline starts with __inline, so the natural change is to
"static __always_inline <type>". Other cases of the warning may be
harder to fix (one pattern is a function definition that gets
rewritten to be static by an including file, "#define funcname static
wrapped_funcname" or similar), but it seems worth fixing these cases
with inline anyway.
Tested for x86_64.
* elf/dl-load.h (_dl_postprocess_loadcmd): Use __always_inline
before return type, without separate inline.
* elf/dl-tunables.c (maybe_enable_malloc_check): Likewise.
* elf/dl-tunables.h (tunable_is_name): Likewise.
* malloc/malloc.c (do_set_trim_threshold): Likewise.
(do_set_top_pad): Likewise.
(do_set_mmap_threshold): Likewise.
(do_set_mmaps_max): Likewise.
(do_set_mallopt_check): Likewise.
(do_set_perturb_byte): Likewise.
(do_set_arena_test): Likewise.
(do_set_arena_max): Likewise.
(do_set_tcache_max): Likewise.
(do_set_tcache_count): Likewise.
(do_set_tcache_unsorted_limit): Likewise.
* nis/nis_subr.c (count_dots): Likewise.
* nptl/allocatestack.c (advise_stack_range): Likewise.
* sysdeps/ieee754/dbl-64/s_sin.c (do_cos): Likewise.
(do_sin): Likewise.
(reduce_sincos): Likewise.
(do_sincos): Likewise.
* sysdeps/unix/sysv/linux/x86/elision-conf.c
(do_set_elision_enable): Likewise.
(TUNABLE_CALLBACK_FNDECL): Likewise.
In the i386 case, it appears that the sole remaining LIBC_PROBE was
removed in commit a9fe4c5aa8 ("Support
six-argument syscalls from C for 32-bit x86, use generic
lowlevellock-futex.h (bug 18138)."), when
sysdeps/unix/sysv/linux/i386/lowlevellock-futex.h was replaced with
the generic version.
For x86_64, the relevant change is commit
76f71081cd ("Use generic
lowlevellock-futex.h in x86_64 lowlevellock.h."), again by using the
generic version of <lowlevellock-futex.h>.
Tested on i386 and x86_64, with and without --enable-systemtap.
On big endian systems the test fails with:
tst-bz24153.c:88: numeric comparison failure
left: 1660944385 (0x63000001); from: ch
right: 99 (0x63); from: L'c'
tst-bz24153.c:90: numeric comparison failure
left: 1677721601 (0x64000001); from: ch
right: 100 (0x64); from: L'd'
error: 2 test failures
One 'char' ("%c") is stored to the 'wchar_t *':
ch = 0x00000001 | 0x63000000
This patch is using "%lc" as format specifier to read a wchar_t.
ChangeLog:
* libio/tst-bz24153.c (wide): Use wide char format specifier.
The recent commit 65f7767a91
has introduced __wmemcmp and the weak alias wmemcmp.
This patch also introduces those symbols if glibc is build
with CFLAGS="-march=z13" where the ifunc is omitted.
ChangeLog:
* sysdeps/s390/wmemcmp-vx.S: Add strong alias to
__wmemcmp and weak alias to wmemcmp.
The alignment of TLS variables is wrong if accessed from within a thread
for architectures with tls variant TLS_TCB_AT_TP.
For the main thread the static tls data is properly aligned.
For other threads the alignment depends on the alignment of the thread
pointer as the static tls data is located relative to this pointer.
This patch adds this alignment for TLS_TCB_AT_TP variants in the same way
as it is already done for TLS_DTV_AT_TP. The thread pointer is also already
properly aligned if the user provides its own stack for the new thread.
This patch extends the testcase nptl/tst-tls1.c in order to check the
alignment of the tls variables and it adds a pthread_create invocation
with a user provided stack.
The test itself is migrated from test-skeleton.c to test-driver.c
and the missing support functions xpthread_attr_setstack and xposix_memalign
are added.
ChangeLog:
[BZ #23403]
* nptl/allocatestack.c (allocate_stack): Align pointer pd for
TLS_TCB_AT_TP tls variant.
* nptl/tst-tls1.c: Migrate to support/test-driver.c.
Add alignment checks.
* support/Makefile (libsupport-routines): Add xposix_memalign and
xpthread_setstack.
* support/support.h: Add xposix_memalign.
* support/xthread.h: Add xpthread_attr_setstack.
* support/xposix_memalign.c: New File.
* support/xpthread_attr_setstack.c: Likewise.
With the default "nor" constraint, current GCC will use the "o"
constraint for constants, after emitting the constant to memory. That
results in unparseable Systemtap probe notes such as "-4@.L1052".
Removing the "o" alternative and using "nr" instead avoids this.
One of the warnings that appears with -Wextra is "ordered comparison
of pointer with integer zero" in malloc.c:tcache_get, for the
assertion:
assert (tcache->entries[tc_idx] > 0);
Indeed, a "> 0" comparison does not make sense for
tcache->entries[tc_idx], which is a pointer. My guess is that
tcache->counts[tc_idx] is what's intended here, and this patch changes
the assertion accordingly.
Tested for x86_64.
* malloc/malloc.c (tcache_get): Compare tcache->counts[tc_idx]
with 0, not tcache->entries[tc_idx].
I'm looking at the warnings from building glibc with -Wextra, to see
if we could use -Wextra by default, possibly with a few of its
warnings disabled, and so benefit from warnings in -Wextra but not in
-Wall. (The vast bulk of the extra warnings so produced are from
-Wunused-parameter -Wsign-compare -Wmissing-field-initializers
-Wtype-limits, so I expect those would be disabled at least at first.)
Various miscellaneous warnings show up with -Wextra that it clearly
seems to make sense to fix independent of whether we add -Wextra to
the normal options for building glibc. This patch fixes one:
"initialized field overwritten [-Woverride-init]" in nscd.
Tested for x86_64.
* nscd/connections.c (reqinfo): Initialize SHUTDOWN element only
once.
This fixes the same bug in fnmatch that was fixed by commit 7e2f0d2d77 for
regexp matching. As a side effect it also removes the use of an unbound
VLA.
Since the size argument is unsigned. we should use unsigned Jcc
instructions, instead of signed, to check size.
Tested on x86-64 and x32, with and without --disable-multi-arch.
[BZ #24155]
CVE-2019-7309
* NEWS: Updated for CVE-2019-7309.
* sysdeps/x86_64/memcmp.S: Use RDX_LP for size. Clear the
upper 32 bits of RDX register for x32. Use unsigned Jcc
instructions, instead of signed.
* sysdeps/x86_64/x32/Makefile (tests): Add tst-size_t-memcmp-2.
* sysdeps/x86_64/x32/tst-size_t-memcmp-2.c: New test.
By ordering the suballocations by decreasing alignment, alignment
gaps can be avoided.
Also use __glibc_unlikely for reading the transitions and type
indexes. In the 8-byte case, two reads are now needed because the
transitions and type indexes are no longer adjacent. The separate
call to __fread_unlocked does not matter from a performance point of
view because __tzfile_read is only invoked rarely.
The computation of tzspec_len is moved in front of the total_size
computation, so that the allocation size computation and the
suballocations are next to each other. Also add an assert that
tzspec_len is positive when it is actually used later.
When running the testsuite, building stdlib/isomac.c outputs the
following warning:
gcc -O -D_GNU_SOURCE -DIS_IN_build -include /home/aurel32/glibc-build/config.h isomac.c -o /home/aurel32/glibc-build/stdlib/isomac
isomac.c: In function ‘get_null_defines’:
isomac.c:260:3: warning: implicit declaration of function ‘close’; did you mean ‘pclose’? [-Wimplicit-function-declaration]
close (fd);
^~~~~
pclose
Fix that by adding the <unistd.h> include.
Changelog:
* stdlib/isomac.c: Include <unistd.h>.
The GMT offset can be outside the range of a 16-bit int type, which
is presumably the reason why long int was used in struct tm. We
cannot change struct tm, but we can change the internal type for
the offset.
On Linux, we define _POSIX_PRIORITY_SCHEDULING, but functions such
as sched_setparam and sched_setscheduler apply to individual threads,
not processes.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
As discussed during development for glibc 2.29, when we increased the
required minimum GCC version for building glibc to GCC 5, working
purely based on the times at which such requirements have been
increased in the past it would be appropriate for glibc 2.30 to
require GCC 6 (matching GCC 4.9 having been required for glibc 2.26).
Naming 6.2 specifically as the minimum version then means a separate
version requirement no longer needs to be specified for powerpc64le.
Thus, this patch increases the minimum to 6.2, removing the
documentation of the separate requirement for powerpc64le. It does
not remove the powerpc64le configure test, or any __GNUC_PREREQ that
could be removed as not being in installed headers or files shared
with gnulib; I think such cleanups are best done separately.
Tested for x86_64.
* configure.ac (libc_cv_compiler_ok): Require GCC 6.2 or later.
* configure: Regenerated.
* manual/install.texi (Tools for Compilation): Update minimum GCC
version.
* INSTALL: Regenerated.
Clock_gettime, settime and getres implementations are unncessarily
complex due to using defines and C file inclusion. Simplify the
code by replacing the redundant defines and removing the inclusion,
making it much easier to understand. No functional changes.
* sysdeps/posix/clock_getres.c (__clock_getres): Cleanup.
* sysdeps/unix/clock_gettime.c (__clock_gettime): Cleanup.
* sysdeps/unix/clock_settime.c (__clock_settime): Cleanup.
* sysdeps/unix/sysv/linux/clock_getres.c (__clock_getres): Cleanup.
* sysdeps/unix/sysv/linux/clock_gettime.c (__clock_gettime): Cleanup.
* sysdeps/unix/sysv/linux/clock_settime.c (__clock_settime): Cleanup.
This version uses general register based memory instruction to load
data, because vector register based is slightly slower in emag.
Character-matching is performed on 16-byte (both size and alignment)
memory block in parallel each iteration.
* sysdeps/aarch64/memchr.S (__memchr): Rename to MEMCHR.
[!MEMCHR](MEMCHR): Set to __memchr.
* sysdeps/aarch64/multiarch/Makefile (sysdep_routines):
Add memchr_generic and memchr_nosimd.
* sysdeps/aarch64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add memchr ifuncs.
* sysdeps/aarch64/multiarch/memchr.c: New file.
* sysdeps/aarch64/multiarch/memchr_generic.S: Likewise.
* sysdeps/aarch64/multiarch/memchr_nosimd.S: Likewise.
This version uses general register based memory store instead of
vector register based, for the former is faster than the latter
in emag.
The fact that DC ZVA size in emag is 64-byte, is used by IFUNC
dispatch to select this memset, so that cost of runtime-check on
DC ZVA size can be saved.
* sysdeps/aarch64/multiarch/Makefile (sysdep_routines):
Add memset_emag.
* sysdeps/aarch64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add __memset_emag to memset ifunc.
* sysdeps/aarch64/multiarch/memset.c (libc_ifunc):
Add IS_EMAG check for ifunc dispatch.
* sysdeps/aarch64/multiarch/memset_base64.S: New file.
* sysdeps/aarch64/multiarch/memset_emag.S: New file.
Emag is a 64-bit CPU core released by AmpereComputing.
Add its name to cpu list, and corresponding macro as utilities for
later IFUNC dispatch.
* manual/tunables.texi (Tunable glibc.cpu.name): Add emag.
* sysdeps/unix/sysv/linux/aarch64/cpu-features.c (cpu_list):
Add emag.
* sysdeps/unix/sysv/linux/aarch64/cpu-features.h (IS_EMAG):
New macro.
From time to time I get fails in tst-spawn like:
tst-spawn.c:111: numeric comparison failure
left: 0 (0x0); from: xlseek (fd2, 0, SEEK_CUR)
right: 28 (0x1c); from: strlen (fd2string)
error: 1 test failures
tst-spawn.c:252: numeric comparison failure
left: 1 (0x1); from: WEXITSTATUS (status)
right: 0 (0x0); from: 0
error: 1 test failures
It turned out, that a child process is testing it's open file descriptors
with e.g. a sequence of testing the current position, setting the position
to zero and reading a specific amount of bytes.
Unfortunately starting with commit 2a69f853c0
the test is spawning a second child process which is sharing some of the
file descriptors. If the test sequence as mentioned above is running in parallel
it leads to test failures.
As the second call of posix_spawn shall test a NULL pid argument,
this patch is just moving the waitpid of the first child
before the posix_spawn of the second child.
ChangeLog:
* posix/tst-spawn do_test(): Move waitpid before posix_spawn.
For a full analysis of both the pthread_rwlock_tryrdlock() stall
and the pthread_rwlock_trywrlock() stall see:
https://sourceware.org/bugzilla/show_bug.cgi?id=23844#c14
In the pthread_rwlock_trydlock() function we fail to inspect for
PTHREAD_RWLOCK_FUTEX_USED in __wrphase_futex and wake the waiting
readers.
In the pthread_rwlock_trywrlock() function we write 1 to
__wrphase_futex and loose the setting of the PTHREAD_RWLOCK_FUTEX_USED
bit, again failing to wake waiting readers during unlock.
The fix in the case of pthread_rwlock_trydlock() is to check for
PTHREAD_RWLOCK_FUTEX_USED and wake the readers.
The fix in the case of pthread_rwlock_trywrlock() is to only write
1 to __wrphase_futex if we installed the write phase, since all other
readers would be spinning waiting for this step.
We add two new tests, one exercises the stall for
pthread_rwlock_trywrlock() which is easy to exercise, and one exercises
the stall for pthread_rwlock_trydlock() which is harder to exercise.
The pthread_rwlock_trywrlock() test fails consistently without the fix,
and passes after. The pthread_rwlock_tryrdlock() test fails roughly
5-10% of the time without the fix, and passes all the time after.
Signed-off-by: Carlos O'Donell <carlos@redhat.com>
Signed-off-by: Torvald Riegel <triegel@redhat.com>
Signed-off-by: Rik Prohaska <prohaska7@gmail.com>
Co-authored-by: Torvald Riegel <triegel@redhat.com>
Co-authored-by: Rik Prohaska <prohaska7@gmail.com>
GLIBC explicitly allows one to assign a new FILE pointer to stdout and
other standard streams. printf and wprintf were honouring assignment to
stdout and using the new value, but puts, putchar, and wide char variants
did not.
The stdout part is fixed here. The stdin part will be fixed in a followup.
Problem found by AddressSanitizer, reported by Hongxu Chen in:
https://debbugs.gnu.org/34140
* posix/regexec.c (proceed_next_node):
Do not read past end of input buffer.
If /etc/aliases ends with a continuation line (a line that starts
with whitespace) which does not have a trailing newline character,
the file parser would crash due to a null pointer dereference.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* NEWS: Add the list of bugs fixed in 2.29.
* manual/contrib.texi: Update contributors list with some more
names.
* manual/install.texi: Update latest versions of packages
tested.
* INSTALL: Regenerated.
There was missing restore of $f3 before the return from the function
via the $y_is_neg path. This caused the math/big testcase from Go-1.11
testsuite (that includes lots of corner cases that exercise remqu) FAIL.
[BZ #24130]
* sysdeps/alpha/remqu.S (__remqu): Add missing restore
of $f3 register on $y_is_neg path.
The full representation of the alternative calendar year (%EY)
typically includes an internal use of "%Ey". As a GNU extension,
apply any flags on "%EY" (e.g. "%_EY", "%-EY") to the internal "%Ey",
allowing users of "%EY" to control how the year is padded.
Reviewed-by: Rafal Luzynski <digitalfreak@lingonborough.com>
Reviewed-by: Zack Weinberg <zackw@panix.com>
ChangeLog:
[BZ #24096]
* manual/time.texi (strftime): Document "%EC" and "%EY".
* time/Makefile (tests): Add tst-strftime2.
(LOCALES): Add ja_JP.UTF-8, lo_LA.UTF-8, and th_TH.UTF-8.
* time/strftime_l.c (__strftime_internal): Add argument yr_spec to
override padding for "%Ey".
If an optional flag ('_' or '-') is specified to "%EY", interpret the
"%Ey" in the subformat as if decorated with that flag.
* time/tst-strftime2.c: New file.
In Japanese locales, strftime's alternative year format (%Ey) produces
a year numbered within a time period called an _era_. A new era
typically begins when a new emperor is enthroned. The result of "%Ey"
is therefore usually a one- or two-digit number.
Many programs that display Japanese era dates assume that the era year
is two digits wide. To improve how these programs display dates
during the first nine years of a new era, change "%Ey" to pad one-
digit numbers on the left with a zero. This change applies to all
locales. It is expected to be harmless for other locales that use the
alternative year format (e.g. lo_LA and th_TH, in which "%Ey" produces
the year of the Buddhist calendar) as those calendars' year numbers
are already more than two digits wide, and this is not expected to
change.
This change needs to be in place before 2019-05-01 CE, as a new era is
scheduled to begin on that date.
Reviewed-by: Zack Weinberg <zackw@panix.com>
Reviewed-by: Rafal Luzynski <digitalfreak@lingonborough.com>
ChangeLog:
[BZ #23758]
* manual/time.texi (strftime): Document "%Ey".
* time/strftime_l.c (__strftime_internal): Set the default width
padding with zero of "%Ey" to 2.
Hurd does not support MAP_NORESERVE and MAP_STACK.
Checked on i686-gnu build.
* support/xsigstack.c (MAP_NORESERVE, MAP_STACK): Define if they
are not defined.
* hurd/lookup-at.c (__file_name_lookup_at): When at_flags contains
AT_EMPTY_PATH, call __dir_lookup and __hurd_file_name_lookup_retry
directly instead of __hurd_file_name_lookup.
The IPv4 address parser in the getaddrinfo function is changed so that
it does not ignore trailing whitespace and all characters after it.
For backwards compatibility, the getaddrinfo function still recognizes
legacy name syntax, such as 192.000.002.010 interpreted as 192.0.2.8
(octal).
This commit does not change the behavior of inet_addr and inet_aton.
gethostbyname already had additional sanity checks (but is switched
over to the new __inet_aton_exact function for completeness as well).
To avoid sending the problematic query names over DNS, commit
6ca53a2453 ("resolv: Do not send queries
for non-host-names in nss_dns [BZ #24112]") is needed.
On x32, the size_t parameter may be passed in the lower 32 bits of a
64-bit register with the non-zero upper 32 bits. The string/memory
functions written in assembly can only use the lower 32 bits of a
64-bit register as length or must clear the upper 32 bits before using
the full 64-bit register for length.
This pach fixes strnlen/wcsnlen for x32. Tested on x86-64 and x32. On
x86-64, libc.so is the same with and withou the fix.
[BZ# 24097]
CVE-2019-6488
* sysdeps/x86_64/multiarch/strlen-avx2.S: Use RSI_LP for length.
Clear the upper 32 bits of RSI register.
* sysdeps/x86_64/strlen.S: Use RSI_LP for length.
* sysdeps/x86_64/x32/Makefile (tests): Add tst-size_t-strnlen
and tst-size_t-wcsnlen.
* sysdeps/x86_64/x32/tst-size_t-strnlen.c: New file.
* sysdeps/x86_64/x32/tst-size_t-wcsnlen.c: Likewise.
On x32, the size_t parameter may be passed in the lower 32 bits of a
64-bit register with the non-zero upper 32 bits. The string/memory
functions written in assembly can only use the lower 32 bits of a
64-bit register as length or must clear the upper 32 bits before using
the full 64-bit register for length.
This pach fixes strncpy for x32. Tested on x86-64 and x32. On x86-64,
libc.so is the same with and withou the fix.
[BZ# 24097]
CVE-2019-6488
* sysdeps/x86_64/multiarch/strcpy-avx2.S: Use RDX_LP for length.
* sysdeps/x86_64/multiarch/strcpy-sse2-unaligned.S: Likewise.
* sysdeps/x86_64/multiarch/strcpy-ssse3.S: Likewise.
* sysdeps/x86_64/x32/Makefile (tests): Add tst-size_t-strncpy.
* sysdeps/x86_64/x32/tst-size_t-strncpy.c: New file.
On x32, the size_t parameter may be passed in the lower 32 bits of a
64-bit register with the non-zero upper 32 bits. The string/memory
functions written in assembly can only use the lower 32 bits of a
64-bit register as length or must clear the upper 32 bits before using
the full 64-bit register for length.
This pach fixes the strncmp family for x32. Tested on x86-64 and x32.
On x86-64, libc.so is the same with and withou the fix.
[BZ# 24097]
CVE-2019-6488
* sysdeps/x86_64/multiarch/strcmp-avx2.S: Use RDX_LP for length.
* sysdeps/x86_64/multiarch/strcmp-sse42.S: Likewise.
* sysdeps/x86_64/strcmp.S: Likewise.
* sysdeps/x86_64/x32/Makefile (tests): Add tst-size_t-strncasecmp,
tst-size_t-strncmp and tst-size_t-wcsncmp.
* sysdeps/x86_64/x32/tst-size_t-strncasecmp.c: New file.
* sysdeps/x86_64/x32/tst-size_t-strncmp.c: Likewise.
* sysdeps/x86_64/x32/tst-size_t-wcsncmp.c: Likewise.
On x32, the size_t parameter may be passed in the lower 32 bits of a
64-bit register with the non-zero upper 32 bits. The string/memory
functions written in assembly can only use the lower 32 bits of a
64-bit register as length or must clear the upper 32 bits before using
the full 64-bit register for length.
This pach fixes memset/wmemset for x32. Tested on x86-64 and x32. On
x86-64, libc.so is the same with and withou the fix.
[BZ# 24097]
CVE-2019-6488
* sysdeps/x86_64/multiarch/memset-avx512-no-vzeroupper.S: Use
RDX_LP for length. Clear the upper 32 bits of RDX register.
* sysdeps/x86_64/multiarch/memset-vec-unaligned-erms.S: Likewise.
* sysdeps/x86_64/x32/Makefile (tests): Add tst-size_t-wmemset.
* sysdeps/x86_64/x32/tst-size_t-memset.c: New file.
* sysdeps/x86_64/x32/tst-size_t-wmemset.c: Likewise.
On x32, the size_t parameter may be passed in the lower 32 bits of a
64-bit register with the non-zero upper 32 bits. The string/memory
functions written in assembly can only use the lower 32 bits of a
64-bit register as length or must clear the upper 32 bits before using
the full 64-bit register for length.
This pach fixes memrchr for x32. Tested on x86-64 and x32. On x86-64,
libc.so is the same with and withou the fix.
[BZ# 24097]
CVE-2019-6488
* sysdeps/x86_64/memrchr.S: Use RDX_LP for length.
* sysdeps/x86_64/multiarch/memrchr-avx2.S: Likewise.
* sysdeps/x86_64/x32/Makefile (tests): Add tst-size_t-memrchr.
* sysdeps/x86_64/x32/tst-size_t-memrchr.c: New file.
On x32, the size_t parameter may be passed in the lower 32 bits of a
64-bit register with the non-zero upper 32 bits. The string/memory
functions written in assembly can only use the lower 32 bits of a
64-bit register as length or must clear the upper 32 bits before using
the full 64-bit register for length.
This pach fixes memcpy for x32. Tested on x86-64 and x32. On x86-64,
libc.so is the same with and withou the fix.
[BZ# 24097]
CVE-2019-6488
* sysdeps/x86_64/multiarch/memcpy-ssse3-back.S: Use RDX_LP for
length. Clear the upper 32 bits of RDX register.
* sysdeps/x86_64/multiarch/memcpy-ssse3.S: Likewise.
* sysdeps/x86_64/multiarch/memmove-avx512-no-vzeroupper.S:
Likewise.
* sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S:
Likewise.
* sysdeps/x86_64/x32/Makefile (tests): Add tst-size_t-memcpy.
tst-size_t-wmemchr.
* sysdeps/x86_64/x32/tst-size_t-memcpy.c: New file.
On x32, the size_t parameter may be passed in the lower 32 bits of a
64-bit register with the non-zero upper 32 bits. The string/memory
functions written in assembly can only use the lower 32 bits of a
64-bit register as length or must clear the upper 32 bits before using
the full 64-bit register for length.
This pach fixes memcmp/wmemcmp for x32. Tested on x86-64 and x32. On
x86-64, libc.so is the same with and withou the fix.
[BZ# 24097]
CVE-2019-6488
* sysdeps/x86_64/multiarch/memcmp-avx2-movbe.S: Use RDX_LP for
length. Clear the upper 32 bits of RDX register.
* sysdeps/x86_64/multiarch/memcmp-sse4.S: Likewise.
* sysdeps/x86_64/multiarch/memcmp-ssse3.S: Likewise.
* sysdeps/x86_64/x32/Makefile (tests): Add tst-size_t-memcmp and
tst-size_t-wmemcmp.
* sysdeps/x86_64/x32/tst-size_t-memcmp.c: New file.
* sysdeps/x86_64/x32/tst-size_t-wmemcmp.c: Likewise.
On x32, the size_t parameter may be passed in the lower 32 bits of a
64-bit register with the non-zero upper 32 bits. The string/memory
functions written in assembly can only use the lower 32 bits of a
64-bit register as length or must clear the upper 32 bits before using
the full 64-bit register for length.
This pach fixes memchr/wmemchr for x32. Tested on x86-64 and x32. On
x86-64, libc.so is the same with and withou the fix.
[BZ# 24097]
CVE-2019-6488
* sysdeps/x86_64/memchr.S: Use RDX_LP for length. Clear the
upper 32 bits of RDX register.
* sysdeps/x86_64/multiarch/memchr-avx2.S: Likewise.
* sysdeps/x86_64/x32/Makefile (tests): Add tst-size_t-memchr and
tst-size_t-wmemchr.
* sysdeps/x86_64/x32/test-size_t.h: New file.
* sysdeps/x86_64/x32/tst-size_t-memchr.c: Likewise.
* sysdeps/x86_64/x32/tst-size_t-wmemchr.c: Likewise.
Before this commit, nss_dns would send a query which did not contain a
host name as the query name (such as invalid\032name.example.com) and
then reject the answer in getanswer_r and gaih_getanswer_slice, using
a check based on res_hnok. With this commit, no query is sent, and a
host-not-found error is returned to NSS without network interaction.
Commit 6923f6db1e ("malloc: Use current
(C11-style) atomics for fastbin access") caused a substantial
performance regression on POWER and Aarch64, and the old atomics,
while hard to prove correct, seem to work in practice.
Since MINSIGSTKSZ may not have sufficent stack space to allow lazy
binding, build tests for minimal signal handler with -Wl,-z,now to
disable lazy binding.
* signal/Makefile (LDFLAGS-tst-minsigstksz-1): New. Set to
-Wl,-z,now.
(LDFLAGS-tst-minsigstksz-2): Likewise.
(LDFLAGS-tst-minsigstksz-3): Likewise.
(LDFLAGS-tst-minsigstksz-3a): Likewise.
(LDFLAGS-tst-minsigstksz-4): Likewise.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
A single underscore was omitted in
sysdeps/powerpc/powerpc64/multiarch/strncmp.c, resulting in use of
power8 version of strncmp instead of power9 version, with significant
performance degradation.
* sysdeps/powerpc/powerpc64/multiarch/strncmp.c: Fix #ifdef.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
There is general agreement that the very short list of things that ISO
C says you can do in an async signal handler should all work when the
handler is running on an alternate signal stack with only MINSIGSTKSZ
space. This patch adds tests to make sure those things do work.
To facilitate this, there is a new set of test support routines for
setting up alternate signal stacks; see support/xsignal.h for the API.
* support/xsignal.h (xalloc_sigstack, xfree_sigstack)
(xget_sigstack_location): New test support functions.
* support/xsigstack.c: New file, implementing them.
* support/tst-xsigstack.c: New test for them.
* support/Makefile: Update.
* signal/tst-minsigstksz-1.c
* signal/tst-minsigstksz-2.c
* signal/tst-minsigstksz-3.c
* signal/tst-minsigstksz-3a.c
* signal/tst-minsigstksz-4.c: New tests.
* signal/Makefile: Run them.
Ignore 112 errors in math/test-ldouble-fma and math/test-ildouble-fma
when IBM 128-bit long double used.
These errors are caused by spurious overflows from libgcc.
* math/libm-test-fma.inc (fma_test_data): Set
XFAIL_ROUNDING_IBM128_LIBGCC to more tests.
Signed-off-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
An error "impossible register constraint in 'asm'" was raised on POWER
5 and due to __vector __int128_t being used as operands without passing the
option -msvx to gcc.
This patch replaces "__vector __int128_t" with "__vector unsigned int"
which requires only -maltivec, available since POWER ISA 2.03, and which
is already passed to the compiler.
* sysdeps/powerpc/powerpc64/tst-ucontext-ppc64-vscr.c:
(do_test): Changed __vector __int128_t to __vector unsigned int.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Optimize x86-64 strcat/strncat, strcpy/strncpy and stpcpy/stpncpy with AVX2.
It uses vector comparison as much as possible. In general, the larger the
source string, the greater performance gain observed, reaching speedups of
1.6x compared to SSE2 unaligned routines. Select AVX2 strcat/strncat,
strcpy/strncpy and stpcpy/stpncpy on AVX2 machines where vzeroupper is
preferred and AVX unaligned load is fast.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
strcat-avx2, strncat-avx2, strcpy-avx2, strncpy-avx2,
stpcpy-avx2 and stpncpy-avx2.
* sysdeps/x86_64/multiarch/ifunc-impl-list.c:
(__libc_ifunc_impl_list): Add tests for __strcat_avx2,
__strncat_avx2, __strcpy_avx2, __strncpy_avx2, __stpcpy_avx2
and __stpncpy_avx2.
* sysdeps/x86_64/multiarch/{ifunc-unaligned-ssse3.h =>
ifunc-strcpy.h}: rename header for a more generic name.
* sysdeps/x86_64/multiarch/ifunc-strcpy.h:
(IFUNC_SELECTOR): Return OPTIMIZE (avx2) on AVX 2 machines if
AVX unaligned load is fast and vzeroupper is preferred.
* sysdeps/x86_64/multiarch/stpcpy-avx2.S: New file
* sysdeps/x86_64/multiarch/stpncpy-avx2.S: Likewise
* sysdeps/x86_64/multiarch/strcat-avx2.S: Likewise
* sysdeps/x86_64/multiarch/strcpy-avx2.S: Likewise
* sysdeps/x86_64/multiarch/strncat-avx2.S: Likewise
* sysdeps/x86_64/multiarch/strncpy-avx2.S: Likewise
This patch fix VSCR position on ucontext. VSCR was read in the wrong
position on ucontext structure because it was ignoring the machine
endianess.
[BZ #24088]
* sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h (vscr_t): Added
ifdef to fix read of VSCR.
* sysdeps/powerpc/powerpc64/Makefile [$subdir == stdlib]: Add
tst-ucontext-ppc64-vscr.c to test list.
* sysdeps/powerpc/powerpc64/tst-ucontext-ppc64-vscr.c: New test file.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
With this patch applied, I get 13 glibc testsuite failures using
TIMEOUTFACTOR=4 on a HiFive Unleashed running Fedora Core 29, using top of
tree binutils and gcc. 5 of those failures are due to a kernel bug. Without
the patch, there are over a hundred failures.
This patch is incidentally similar to the powerpc-nofpu ulps update that
Joseph Myers added a few days ago.
* sysdeps/riscv/rv64/rvd/libm-test-ulps: Update.
Add Ares to the midr_el0 list and support ifunc dispatch. Since Ares
supports 2 128-bit loads/stores, use Neon registers for memcpy by
selecting __memcpy_falkor by default (we should rename this to
__memcpy_simd or similar).
* manual/tunables.texi (glibc.cpu.name): Add ares tunable.
* sysdeps/aarch64/multiarch/memcpy.c (__libc_memcpy): Use
__memcpy_falkor for ares.
* sysdeps/unix/sysv/linux/aarch64/cpu-features.h (IS_ARES):
Add new define.
* sysdeps/unix/sysv/linux/aarch64/cpu-features.c (cpu_list):
Add ares cpu.
Commit 1294b1892e ("Add support for sqrt asm redirects") added the
-fno-math-errno flag to build most of the glibc in order to enable GCC
to inline math functions. Due to GCC bug #88576, saving and restoring
errno around calls to malloc are optimized-out. In turn this causes
strerror to set errno to ENOMEM if it get passed an invalid error number
and if malloc sets errno to ENOMEM (which might happen even if it
succeeds). This is not allowed by POSIX.
This patch changes the build flags, building only libm with
-fno-math-errno and all the remaining code with -fno-math-errno. This
should be safe as libm doesn't contain any code saving and restoring
errno around malloc. This patch can probably be reverted once the GCC
bug is fixed and available in stable releases.
Tested on x86-64, no regression in the testsuite.
Changelog:
[BZ #24024]
* Makeconfig: Build libm with -fno-math-errno but build the remaining
code with -fmath-errno.
* string/Makefile [$(build-shared)] (tests): Add test-strerror-errno.
[$(build-shared)] (LDLIBS-test-strerror-errno): New variable.
* string/test-strerror-errno.c: New file.
The en_US locale use a 12h am/pm format in both d_fmt and d_t_fmt, which
is correct, but does not define date_fmt. This causes the default value
to be used, which is in 24h format.
This patch adds the date_fmt entry to the en_US locale with the same
value as d_t_fmt as the latter already includes the timezone.
Changelog
[BZ #24046]
* localedata/locales/en_US (date_fmt): Add, set to
"%a %d %b %Y %r %Z".
@var is intended for placeholders (such as function parameters).
Actual variables need to use @code because @var causes upper-case
output, resulting in a different C identifier.
With -O included in CFLAGS it fails to build with:
../sysdeps/ieee754/ldbl-96/e_jnl.c: In function '__ieee754_jnl':
../sysdeps/ieee754/ldbl-96/e_jnl.c:146:20: error: 'temp' may be used uninitialized in this function [-Werror=maybe-uninitialized]
b = invsqrtpi * temp / sqrtl (x);
~~~~~~~~~~^~~~~~
../sysdeps/ieee754/ldbl-96/e_jnl.c: In function '__ieee754_ynl':
../sysdeps/ieee754/ldbl-96/e_jnl.c:375:16: error: 'temp' may be used uninitialized in this function [-Werror=maybe-uninitialized]
b = invsqrtpi * temp / sqrtl (x);
~~~~~~~~~~^~~~~~
../sysdeps/ieee754/dbl-64/e_jn.c: In function '__ieee754_jn':
../sysdeps/ieee754/dbl-64/e_jn.c:113:20: error: 'temp' may be used uninitialized in this function [-Werror=maybe-uninitialized]
b = invsqrtpi * temp / sqrt (x);
~~~~~~~~~~^~~~~~
../sysdeps/ieee754/dbl-64/e_jn.c: In function '__ieee754_yn':
../sysdeps/ieee754/dbl-64/e_jn.c:320:16: error: 'temp' may be used uninitialized in this function [-Werror=maybe-uninitialized]
b = invsqrtpi * temp / sqrt (x);
~~~~~~~~~~^~~~~~
Build tested with Yocto for ARM, AARCH64, X86, X86_64, PPC, MIPS, MIPS64
with -O, -O1, -Os.
For AARCH64 it needs one more fix in locale for -Os:
https://sourceware.org/ml/libc-alpha/2018-09/msg00539.html
[BZ #19444]
* sysdeps/ieee754/dbl-64/e_jn.c (__ieee754_jn): Use
__builtin_unreachable for default case in switch.
(__ieee754_yn): Likewise.
* sysdeps/ieee754/ldbl-96/e_jnl.c (__ieee754_jnl): Likewise.
(__ieee754_ynl): Likewise.
* sysdeps/ieee754/ldbl-128/e_jnl.c (__ieee754_jnl): Likewise.
(__ieee754_ynl): Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_jnl.c (__ieee754_jnl): Likewise.
(__ieee754_ynl): Likewise.
An attempt to re-create a different PTY under the same name can fail
if the PTY has a very high number. Try to increase the file
descriptor limit in this case, and bail out if this still does not
allow the test to proceed.
This patch wraps all uses of *_{enable,disable}_asynccancel and
and *_CANCEL_{ASYNC,RESET} in either already provided macros
(lll_futex_timed_wait_cancel) or creates new ones if the
functionality is not provided (SYSCALL_CANCEL_NCS, lll_futex_wait_cancel,
and lll_futex_timed_wait_cancel).
Also for some generic implementations, the direct call of the macros
are removed since the underlying symbols are suppose to provide
cancellation support.
This is a priliminary patch intended to simplify the work required
for BZ#12683 fix. It is a refactor change, no semantic changes are
expected.
Checked on x86_64-linux-gnu and i686-linux-gnu.
* nptl/pthread_join_common.c (__pthread_timedjoin_ex): Use
lll_wait_tid with timeout.
* nptl/sem_wait.c (__old_sem_wait): Use lll_futex_wait_cancel.
* sysdeps/nptl/aio_misc.h (AIO_MISC_WAIT): Use
futex_reltimed_wait_cancelable for cancelabla mode.
* sysdeps/nptl/gai_misc.h (GAI_MISC_WAIT): Likewise.
* sysdeps/posix/open64.c (__libc_open64): Do not call cancelation
macros.
* sysdeps/posix/sigwait.c (__sigwait): Likewise.
* sysdeps/posix/waitid.c (__sigwait): Likewise.
* sysdeps/unix/sysdep.h (__SYSCALL_CANCEL_CALL,
SYSCALL_CANCEL_NCS): New macro.
* sysdeps/nptl/lowlevellock.h (lll_wait_tid): Add timeout argument.
(lll_timedwait_tid): Remove macro.
* sysdeps/unix/sysv/linux/i386/lowlevellock.h (lll_wait_tid):
Likewise.
(lll_timedwait_tid): Likewise.
* sysdeps/unix/sysv/linux/sparc/lowlevellock.h (lll_wait_tid):
Likewise.
(lll_timedwait_tid): Likewise.
* sysdeps/unix/sysv/linux/x86_64/lowlevellock.h (lll_wait_tid):
Likewise.
(lll_timedwait_tid): Likewise.
* sysdeps/unix/sysv/linux/clock_nanosleep.c (__clock_nanosleep):
Use INTERNAL_SYSCALL_CANCEL.
* sysdeps/unix/sysv/linux/futex-internal.h
(futex_reltimed_wait_cancelable): Use LIBC_CANCEL_{ASYNC,RESET}
instead of __pthread_{enable,disable}_asynccancel.
* sysdeps/unix/sysv/linux/lowlevellock-futex.h
(lll_futex_wait_cancel): New macro.
The x86 defines optimized THREAD_ATOMIC_* macros where reference always
the current thread instead of the one indicated by input 'descr' argument.
It work as long the input is the self thread pointer, however it generates
wrong code if the semantic is to set a bit atomicialy from another thread.
This is not an issue for current GLIBC usage, however the new cancellation
code expects that some synchronization code to atomically set bits from
different threads.
If some usage indeed proves to be a hotspot we can add an extra macro
with a more descriptive name (THREAD_ATOMIC_BIT_SET_SELF for instance)
where i386 might optimize it.
Checked on i686-linux-gnu.
* sysdeps/i686/nptl/tls.h (THREAD_ATOMIC_CMPXCHG_VAL,
THREAD_ATOMIC_AND, THREAD_ATOMIC_BIT_SET): Remove macros.
The x86 defines optimized THREAD_ATOMIC_* macros where reference always
the current thread instead of the one indicated by input 'descr' argument.
It work as long the input is the self thread pointer, however it generates
wrong code if the semantic is to set a bit atomicialy from another thread.
This is not an issue for current GLIBC usage, however the new cancellation
code expects that some synchronization code to atomically set bits from
different threads.
The generic code generates an additional load to reference to TLS segment,
for instance the code:
THREAD_ATOMIC_BIT_SET (THREAD_SELF, cancelhandling, CANCELED_BIT);
Compiles to:
lock;orl $4, %fs:776
Where with patch changes it now compiles to:
mov %fs:16,%rax
lock;orl $4, 776(%rax)
If some usage indeed proves to be a hotspot we can add an extra macro
with a more descriptive name (THREAD_ATOMIC_BIT_SET_SELF for instance)
where x86_64 might optimize it.
Checked on x86_64-linux-gnu.
* sysdeps/x86_64/nptl/tls.h (THREAD_ATOMIC_CMPXCHG_VAL,
THREAD_ATOMIC_AND, THREAD_ATOMIC_BIT_SET): Remove macros.
With upcoming fix for BZ#12683, pthread cancellation does not act for:
1. If syscall is blocked but with some side effects already having
taken place (e.g. a partial read or write).
2. After the syscall has returned.
The main change is due the fact programs need to act in syscalls with
side-effects (for instance, to avoid leak of allocated resources or
handle partial read/write).
This patch changes the NPTL testcase that assumes the old behavior and
also changes the tst-backtrace{5,6} to ignore the cancellable wrappers.
Checked on i686-linux-gnu, x86_64-linux-gnu, x86_64-linux-gnux32,
aarch64-linux-gnu, arm-linux-gnueabihf, powerpc64le-linux-gnu,
powerpc-linux-gnu, sparcv9-linux-gnu, and sparc64-linux-gnu.
* debug/tst-backtrace5.c (handle_signal): Avoid cancellable wrappers
in backtrace analysis.
* nptl/tst-cancel4.c (tf_write): Handle cancelled syscall with
side-effects.
(tf_send): Likewise.
bits/hwcap.h should be updated together with dl-procinfo.c.
* sysdeps/unix/sysv/linux/aarch64/bits/hwcap.h: Add comment.
* sysdeps/unix/sysv/linux/aarch64/dl-procinfo.c (_DL_HWCAP_COUNT):
Update.
Austin Group issue #411 [1] proposes that posix_spawn file action
posix_spawn_file_actions_adddup2 resets the close-on-exec when
source and destination refer to same file descriptor.
It solves the issue on multi-thread applications which uses
close-on-exec as default, and want to hand-chose specifically
file descriptor to purposefully inherited into a child process.
Current approach to achieve this scenario is to use two adddup2 file
actions and a temporary file description which do not conflict with
any other, coupled with a close file action to avoid leaking the
temporary file descriptor. This approach, besides being complex,
may fail with EMFILE/ENFILE file descriptor exaustion.
This can be more easily accomplished with an in-place removal of
FD_CLOEXEC. Although the resulting adddup2 semantic is slight
different than dup2 (equal file descriptors should be handled as
no-op), the proposed possible solution are either more complex
(fcntl action which a limited set of operations) or results in
unrequired operations (dup3 which also returns EINVAL for same
file descriptor).
Checked on aarch64-linux-gnu.
[BZ #23640]
* posix/tst-spawn.c (do_prepare, handle_restart, do_test): Add
posix_spawn_file_actions_adddup2 test to check O_CLOCEXEC reset.
* sysdeps/unix/sysv/linux/spawni.c (__spawni_child): Add
close-on-exec reset for adddup2 file action.
* sysdeps/posix/spawni.c (__spawni_child): Likewise.
[1] http://austingroupbugs.net/view.php?id=411
The only difference between noncompliant and C99-compliant scanf is
that the former accepts the archaic GNU extension '%as' (also %aS and
%a[...]) meaning to allocate space for the input string with malloc.
This extension conflicts with C99's use of %a as a format _type_
meaning to read a floating-point number; POSIX.1-2008 standardized
equivalent functionality using the modifier letter 'm' instead (%ms,
%mS, %m[...]).
The extension was already disabled in most conformance modes:
specifically, any mode that doesn't involve _GNU_SOURCE and _does_
involve either strict conformance to C99 or loose conformance to both
C99 and POSIX.1-2001 would get the C99-compliant scanf. With
compilers new enough to use -std=gnu11 instead of -std=gnu89, or
equivalent, that includes the default mode.
With this patch, we now provide C99-compliant scanf in all
configurations except when _GNU_SOURCE is defined *and*
__STDC_VERSION__ or __cplusplus (whichever is relevant) indicates
C89/C++98. This leaves the old scanf available under e.g. -std=c89
-D_GNU_SOURCE, but removes it from e.g. -std=gnu11 -D_GNU_SOURCE (it
was already not present under -std=gnu11 without -D_GNU_SOURCE) and
from -std=gnu89 without -D_GNU_SOURCE.
There needs to be an internal override so we can compile the
noncompliant scanf itself. This is the same problem we had when we
removed 'gets' from _GNU_SOURCE and it's dealt with the same way:
there's a new __GLIBC_USE symbol, DEPRECATED_SCANF, which defaults to
off under the appropriate conditions for external code, but can be
overridden by individual files within stdio.
We also run into problems with PLT bypass for internal uses of sscanf,
because libc_hidden_proto uses __REDIRECT and so does the logic in
stdio.h for choosing which implementation of scanf to use; __REDIRECT
isn't transitive, so include/stdio.h needs to bridge the gap with a
macro. As far as I can tell, sscanf is the only function in this
family that's internally called by unrelated code.
Finally, there are several tests in stdio-common that use the
extension. bug21.c is a regression test for a crash; it still
exercises the relevant code when changed to use %ms instead of %as.
scanf14.c through scanf17.c are more complicated since they are
actually testing the subtleties of the extension - under what
circumstances is 'a' treated as a modifier letter, etc. I changed all
of them to use %ms instead of %as as well, but duplicated scanf14.c
and scanf16.c as scanf14a.c and scanf16a.c. These still use %as and
are compiled with -std=gnu89 to access the old extension. A bunch of
diagnostic overrides and manual workarounds for the old stdio.h
behavior become unnecessary. Yay!
* include/features.h (__GLIBC_USE_DEPRECATED_SCANF): New __GLIBC_USE
parameter. Only use deprecated scanf when __USE_GNU is defined
and __STDC_VERSION__ is less than 199901L or __cplusplus is less
than 201103L, whichever is relevant for the language being compiled.
* libio/stdio.h, libio/bits/stdio-ldbl.h: Decide whether to redirect
scanf, fscanf, sscanf, vscanf, vfscanf, and vsscanf to their
__isoc99_ variants based only on __GLIBC_USE (DEPRECATED_SCANF).
* wcsmbs/wchar.h: wcsmbs/bits/wchar-ldbl.h: Likewise for
wscanf, fwscanf, swscanf, vwscanf, vfwscanf, and vswscanf.
* libio/iovsscanf.c
* libio/fwscanf.c
* libio/iovswscanf.c
* libio/swscanf.c
* libio/vscanf.c
* libio/vwscanf.c
* libio/wscanf.c
* stdio-common/fscanf.c
* stdio-common/scanf.c
* stdio-common/vfscanf.c
* stdio-common/vfwscanf.c
* sysdeps/ieee754/ldbl-opt/nldbl-compat.c
* sysdeps/ieee754/ldbl-opt/nldbl-fscanf.c
* sysdeps/ieee754/ldbl-opt/nldbl-fwscanf.c
* sysdeps/ieee754/ldbl-opt/nldbl-iovfscanf.c
* sysdeps/ieee754/ldbl-opt/nldbl-scanf.c
* sysdeps/ieee754/ldbl-opt/nldbl-sscanf.c
* sysdeps/ieee754/ldbl-opt/nldbl-swscanf.c
* sysdeps/ieee754/ldbl-opt/nldbl-vfscanf.c
* sysdeps/ieee754/ldbl-opt/nldbl-vfwscanf.c
* sysdeps/ieee754/ldbl-opt/nldbl-vscanf.c
* sysdeps/ieee754/ldbl-opt/nldbl-vsscanf.c
* sysdeps/ieee754/ldbl-opt/nldbl-vswscanf.c
* sysdeps/ieee754/ldbl-opt/nldbl-vwscanf.c
* sysdeps/ieee754/ldbl-opt/nldbl-wscanf.c:
Override __GLIBC_USE_DEPRECATED_SCANF to 1.
* stdio-common/sscanf.c: Likewise. Remove ldbl_hidden_def for __sscanf.
* stdio-common/isoc99_sscanf.c: Add libc_hidden_def for __isoc99_sscanf.
* include/stdio.h: Provide libc_hidden_proto for __isoc99_sscanf,
not sscanf.
[!__GLIBC_USE (DEPRECATED_SCANF)]: Define sscanf as __isoc99_scanf
with a preprocessor macro.
* stdio-common/bug21.c, stdio-common/scanf14.c:
Use %ms instead of %as, %mS instead of %aS, %m[] instead of %a[];
remove DIAG_IGNORE_NEEDS_COMMENT for -Wformat.
* stdio-common/scanf16.c: Likewise. Add __attribute__ ((format (scanf)))
to xscanf, xfscanf, xsscanf.
* stdio-common/scanf14a.c: New copy of scanf14.c which still uses
%as, %aS, %a[]. Remove DIAG_IGNORE_NEEDS_COMMENT for -Wformat.
* stdio-common/scanf16a.c: New copy of scanf16.c which still uses
%as, %aS, %a[]. Add __attribute__ ((format (scanf))) to xscanf,
xfscanf, xsscanf.
* stdio-common/scanf15.c, stdio-common/scanf17.c: No need to
override feature selection macros or provide definitions of u_char etc.
* stdio-common/Makefile (tests): Add scanf14a and scanf16a.
(CFLAGS-scanf15.c, CFLAGS-scanf17.c): Remove.
(CFLAGS-scanf14a.c, CFLAGS-scanf16a.c): New. Compile these files
with -std=gnu89.
This patch consolidates the Linux termios.h by removing the arch-specific
one.
No semantic change is expected, checked on a build against x86_64-linux-gnu,
alpha-linux-gnu, mips64-linux-gnu, and sparc64-linux-gnu.
* sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add
bits/termios-misc.h.
* sysdeps/unix/sysv/linux/alpha/bits/termios.h: Remove file.
* sysdeps/unix/sysv/linux/mips/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/bits/termios-misc.h: New file.
* sysdeps/unix/sysv/linux/bits/termios.h: Include termios-misc.h.
It is used only on hurd.
No semantic change is expected, checked on a build against x86_64-linux-gnu,
alpha-linux-gnu, mips64-linux-gnu, and sparc64-linux-gnu.
* sysdeps/unix/sysv/linux/bits/termios.h (_IOT_termios): Remove.
* sysdeps/unix/sysv/linux/alpha/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/mips/bits/termios.h: Likewise.
This patch consolidates the termios symbolic constants for use with tcflow
in its own header. The Linux generic implementation values match the
kernel UAPI and each architecture with deviate values have their own
implementation (currently only mips).
No semantic change is expected, checked on a build against x86_64-linux-gnu,
alpha-linux-gnu, mips64-linux-gnu, and sparc64-linux-gnu.
* sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add
termios-tcflow.h.
* sysdeps/unix/sysv/linux/bits/termios-tcflow.h: New file.
* sysdeps/unix/sysv/linux/mips/bits/termios-tcflow.h: Likewise.
* sysdeps/unix/sysv/linux/bits/termios.h (TCSANOW, TCSADRAIN,
TCSAFLUSH): Move to termios-tcflow.h.
* sysdeps/unix/sysv/linux/alpha/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/mips/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/termios.h: Likewise.
This patch consolidates the termios symbolic constants used for local
mode with c_lflag member on its own header. The Linux generic implementation
values match the kernel UAPI and each architecture with deviate values
have their own implementation (in this case alpha, mips, and powerpc).
No semantic change is expected, checked on a build against x86_64-linux-gnu,
alpha-linux-gnu, mips64-linux-gnu, and sparc64-linux-gnu.
* sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add
termios-c_lflag.h.
* sysdeps/unix/sysv/linux/bits/termios-c_lflag.h: New file.
* sysdeps/unix/sysv/linux/alpha/bits/termios-c_lflag.h: Likewise.
* sysdeps/unix/sysv/linux/mips/bits/termios-c_lflag.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/termios-c_lflag.h: Likewise.
* sysdeps/unix/sysv/linux/bits/termios.h (ISIG, ISCANON, ECHO, ECHOE,
ECHOK, ECHONL, NOFLSH, TOSTOP, IEXTEN): Move to termios-c_lflag.h.
[__USE_MISC || (__USE_XOPEN && !__USE_XOPEN2K)] (XCASE): Likewise.
[__USE_MISC] (ECHOCTL, ECHOPRT, ECHOKE, FLUSHO, PENDIN, EXTPROC):
Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/mips/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/termios.h: Likewise.
This patch consolidates the termios symbolic constants used for output
mode with c_cflag memver on its own header. The Linux generic
implementation values match the kernel UAPI and each architecture with
deviate values have their own implementation (in this case alpha and
powerpc).
No semantic change is expected, checked on a build against x86_64-linux-gnu,
alpha-linux-gnu, mips64-linux-gnu, and sparc64-linux-gnu.
* sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add
termios-c_cflag.h.
* sysdeps/unix/sysv/linux/bits/termios-c_cflag.h: New file.
* sysdeps/unix/sysv/linux/alpha/bits/termios-c_cflag.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/termios-c_cflag.h: Likewise.
* sysdeps/unix/sysv/linux/bits/termios.h (CSIZE, CS5, CS6, CS7, CS8,
CSTOPB, CREAD, PARENB, PARODD, HUPCL, CLOCAL): Move to
termios-c_cflag.h.
* sysdeps/unix/sysv/linux/alpha/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/mips/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/termios.h: Likewise.
This patch consolidates the termios symbolic constants used for baud rates
selection used along with speed_t on its own header. The Linux generic
implementation values match the kernel UAPI and each architecture with
deviate values have their own implementation (in this case alpha and
powerpc).
No semantic change is expected, checked on a build against x86_64-linux-gnu,
alpha-linux-gnu, mips64-linux-gnu, and sparc64-linux-gnu.
[BZ #23783]
* sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add
termios-baud.h.
* sysdeps/unix/sysv/linux/bits/termios-baud.h: New file.
* sysdeps/unix/sysv/linux/alpha/bits/termios-baud.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/termios-baud.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/termios-baud.h: Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/termios.h (B57600, B115200,
B230400, B460800, B500000, B576000, B921600, B1000000, B1152000,
B1500000, B2000000, B2500000, B3000000, B3500000, B4000000,
__MAX_BAUD): Move to termios-baud.h.
[__USE_MISC] (CBAUD, CBAUDEX): Likewise.
* sysdeps/unix/sysv/linux/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/mips/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/termios.h: Likewise.
This patch consolidates the termios symbolic constants used for ouput
modes with c_oflag member on its own header. The Linux generic implementation
values match the kernel UAPI and each architecture with deviate values
have their own implementation (in this case alpha, powerpc, and sparc).
No semantic change is expected, checked on a build against x86_64-linux-gnu,
alpha-linux-gnu, mips64-linux-gnu, and sparc64-linux-gnu.
* sysdeps/unix/sysv/linux/Makefile (sysdep_routines): Add
termios-c_oflag.h.
* sysdeps/unix/sysv/linux/bits/termios-c_oflag.h: New file.
* sysdeps/unix/sysv/linux/alpha/bits/termios-c_oflag.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/termios-c_oflag.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/termios-c_oflag.h: Likewise.
* sysdeps/unix/sysv/linux/bits/termios.h (OPOST, OLCUC, ONLCR, OCRNL,
ONOCR, ONLRET, OFILL, OFDEL, VTDLY, VT0, VT1): Move to
termios-c_oflag.h.
[__USE_MISC || __USE_XOPEN] (NLDLY, NL0, NL1, CRDLY, CR0, CR1, CR2,
CR3, TABDLY, TAB0, TAB1, TAB2, TAB3, BSDLY, BS0, BS1, FFDLY, FF0,
FFR1): Likewise.
[USE_MISC] (XTABS): Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/mips/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/termios.h Likewise.
This patch consolidates the termios symbolic constants used for input
modes with c_iflag member on its own header. The Linux generic implementation
values match the kernel UAPI and each architecture with deviate values
have their own implementation (in this case alpha and powerpc).
No semantic change is expected, checked on a build against x86_64-linux-gnu,
alpha-linux-gnu, mips64-linux-gnu, and sparc64-linux-gnu.
* sysdeps/unix/sysv/linux/Makefile (sysdeps_headers): Add
termios-c_iflag.h.
* sysdeps/unix/sysv/linux/bits/termios-c_iflag.h: New file.
* sysdeps/unix/sysv/linux/alpha/bits/termios-c_iflag.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/termios-c_iflag.h: Likewise.
* sysdeps/unix/sysv/linux/bits/termios.h (IGNBRK, BRKINT, IGNPAR, PARMRK,
INPCK, ISTRIP, INLCR, IGNCR, ICRNL, IXON, IXOFF, IXANY, IUCLC, IMAXBEL,
IUTF8): Move to termios-c_iflag.h.
* sysdeps/unix/sysv/linux/alpha/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/mips/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/termios.h: Likewise.
This patch consolidates the termios symbolic constants used as subscript
for the array c_cc on its own header. The Linux generic implementation
values match the kernel UAPI and each architecture with deviate values
have their own implementation (in this case alpha, mips64, sparc64, and
powerpc).
No semantic change is expected, checked on a build against x86_64-linux-gnu,
alpha-linux-gnu, mips64-linux-gnu, and sparc64-linux-gnu.
* sysdeps/unix/sysv/linux/Makefile (sysdeps_headers): Add
termios-cc.h.
* sysdeps/unix/sysv/linux/bits/termios-c_cc.h: Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/termios-c_cc.h: New file.
* sysdeps/unix/sysv/linux/mips/bits/termios-c_cc.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/termios-c_cc.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/termios-c_cc.h: Likewise.
* sysdeps/unix/sysv/linux/bits/termios.h (VINTR, VQUIT, VERASE,
VKILL, VEOF, VTIME, VMIN, VSWTC, VSTART, VSTOP, VSUSP, VEOL,
VREPRINT, VDISCARD, VWERASE, VLNEXT, VEOLF2): Move to termios-cc.h.
* sysdeps/unix/sysv/linux/alpha/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/mips/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/termios.h: Likewise.
This patch consolidates the struct termios definition on its own header
and adds arch-defined ones for ABIs that deviate from generic
implementation. They are:
- alpha which has a slight different layout than generic one (c_cc
field is defined prior c_line).
- sparc and mips which do not have the c_ispeed/c_ospeed fields.
No semantic change is expected, checked on a build against x86_64-linux-gnu,
alpha-linux-gnu, mips64-linux-gnu, and sparc64-linux-gnu.
* sysdeps/unix/sysv/linux/alpha/bits/termios-struct.h: New file.
* sysdeps/unix/sysv/linux/bits/termios-struct.h: Likewise.
* sysdeps/unix/sysv/linux/mips/bits/termios-struct.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/termios-struct.h: Likewise.
* sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add
termios-struct.h.
* sysdeps/unix/sysv/linux/bits/termios.h (struct termios): Move to
termios-struct.h.
* sysdeps/unix/sysv/linux/alpha/bits/termios.h (struct termios):
Likewise.
* sysdeps/unix/sysv/linux/mips/bits/termios.h (struct termios):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/termios.h (struct termios):
Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/termios.h (struct termios):
Likewise.
* sysdeps/unix/sysv/linux/kernel_termios.h (_HAVE_C_ISPEED,
_HAVE_C_OSPEED): Define.
* sysdeps/unix/sysv/linux/mips/kernel_termios.h (_HAVE_C_ISPEED,
_HAVE_C_OSPEED): Likewise.
* sysdeps/unix/sysv/linux/sparc/kernel_termios.h (_HAVE_C_ISPEED,
_HAVE_C_OSPEED): Likewise.
* sysdeps/unix/sysv/linux/speed.c [_HAVE_STRUCT_TERMIOS_C_OSPEED]
(cfsetospeed): Check for define value instead of existence.
[_HAVE_STRUCT_TERMIOS_C_ISPEED] (cfsetispeed): Likewise.
* sysdeps/unix/sysv/linux/tcgetattr.c [_HAVE_STRUCT_TERMIOS_C_ISPEED
&& _HAVE_C_ISPEED] (__tcgetattr): Likewise.
* sysdeps/unix/sysv/linux/tcsetattr.c [_HAVE_STRUCT_TERMIOS_C_ISPEED
&& _HAVE_C_ISPEED] (__tcsetattr): Likewise.
This patch defines TIOCSER_TEMT on all architectures using the __USE_MISC
guards similar to BZ#17782 fix. Latest Linux UAPI defines TIOCSER_TEMT
with the same value for all architectures, so it is safe to use the value
as default for all ABIs.
Checked on x86_64linux-gnu and build against sparc64-linux-gnu and
powerpc64le-linux-gnu.
[BZ #17783]
* sysdeps/unix/sysv/linux/bits/termios.h [__USE_MISC] (TIOCSER_TEMT):
Define.
* sysdeps/unix/sysv/linux/powerpc/bits/termios.h [__USE_MISC]
(TIOCSER_TEMT): Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/termios.h [__USE_MISC]
(TEOCSER_TEMT): Likewise.
This patch updates the Linux kernel version in tst-mman-consts.py to
4.20 (meaning that's the version for which glibc is expected to have
the same constants as the kernel, up to the exceptions listed in the
test). (Once we have more such tests sharing common infrastructure, I
expect the kernel version will be something set in the infrastructure
shared by all such tests, rather than something needing updating
separately for each test for each new kernel version.)
Tested with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/tst-mman-consts.py (main): Expect
constants to match with Linux 4.20.
The pre-ARMv7 CPUs are missing atomic compare and exchange and/or
barrier instructions. Therefore those are implemented using kernel
assistance, calling a kernel function at a specific address, and passing
the arguments in the r0 to r4 registers. This is done by specifying
registers for local variables. The a_ptr variable is placed in the r2
register and declared with __typeof (mem). According to the GCC
documentation on local register variables, if mem is a constant pointer,
the compiler may substitute the variable with its initializer in asm
statements, which may cause the corresponding operand to appear in a
different register.
This happens in __libc_start_main with the pointer to the thread counter
for static binaries (but not the shared ones):
# ifdef SHARED
unsigned int *ptr = __libc_pthread_functions.ptr_nthreads;
# ifdef PTR_DEMANGLE
PTR_DEMANGLE (ptr);
# endif
# else
extern unsigned int __nptl_nthreads __attribute ((weak));
unsigned int *const ptr = &__nptl_nthreads;
# endif
This causes static binaries using threads to crash when the GNU libc is
built with GCC 8 and most notably tst-cancel21-static.
To fix that, use the same trick than for the volatile qualifier,
defining a_ptr as a union.
Changelog:
[BZ #24034]
* sysdeps/unix/sysv/linux/arm/atomic-machine.h
(__arm_assisted_compare_and_exchange_val_32_acq): Use uint32_t rather
than __typeof (...) for the a_ptr variable.
According to ISO C99, passing the same buffer as source and destination
to sprintf, snprintf, vsprintf, or vsnprintf has undefined behavior.
Until the commit
commit 4e2f43f842
Author: Zack Weinberg <zackw@panix.com>
Date: Wed Mar 7 14:32:03 2018 -0500
Use PRINTF_FORTIFY instead of _IO_FLAGS2_FORTIFY (bug 11319)
a call to sprintf or vsprintf with overlapping buffers, for instance
vsprintf (buf, "%sTEXT", buf), would append `TEXT' into buf, while a
call to snprintf or vsnprintf would override the contents of buf.
After the aforementioned commit, the behavior of sprintf and vsprintf
changed (so that they also override the contents of buf).
This patch reverts this behavioral change, because it will likely break
applications that rely on the previous behavior, even though it is
undefined by ISO C. As noted by Szabolcs Nagy, this is used in SPEC2017
507.cactuBSSN_r/src/PUGH/PughUtils.c:
sprintf(mess," Size:");
for (i=0;i<dim+1;i++)
{
sprintf(mess,"%s %d",mess,pughGH->GFExtras[dim]->nsize[i]);
}
More important to notice is the fact that the overwriting of the
destination buffer is not the only behavior affected by the refactoring.
Before the refactoring, sprintf and vsprintf would use _IO_str_jumps,
whereas __sprintf_chk and __vsprintf_chk would use _IO_str_chk_jumps.
After the refactoring, all use _IO_str_chk_jumps, which would make
sprintf and vsprintf report buffer overflows and terminate the program.
This patch also reverts this behavior, by installing the appropriate
jump table for each *sprintf functions.
Apart from reverting the changes, this patch adds a test case that has
the old behavior hardcoded, so that regressions are noticed if something
else unintentionally changes the behavior.
Tested for powerpc64le.
This patch adds the IPV6_MULTICAST_ALL constant from Linux 4.20 to
bits/in.h.
Tested for x86_64.
* sysdeps/unix/sysv/linux/bits/in.h (IPV6_MULTICAST_ALL): New
macro.
This patch adds the PACKET_IGNORE_OUTGOING constant from Linux 4.20 to
netpacket/packet.h.
Tested for x86_64.
* sysdeps/unix/sysv/linux/netpacket/packet.h
(PACKET_IGNORE_OUTGOING): New macro.
This patch adds the HWCAP_SSBS constant from Linux 4.20 to the AArch64
bits/hwcap.h.
Tested with build-many-glibcs.py for aarch64-linux-gnu.
* sysdeps/unix/sysv/linux/aarch64/bits/hwcap.h (HWCAP_SSBS): New
macro.
This patch updates sysdeps/unix/sysv/linux/syscall-names.list for
Linux 4.20. Although there are no new syscalls, the
riscv_flush_icache syscall has moved to asm/unistd.h (previously in
asm/syscalls.h) and so now needs to be added to the list.
Tested with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/syscall-names.list: Update kernel
version to 4.20.
(riscv_flush_icache): New syscall.
This patch updates some miscellaneous files from their upstream
sources (thereby bringing in copyright date updates for some of those
files).
Tested for x86_64, including "make pdf".
* manual/texinfo.tex: Update to version 2018-12-28.17 with
trailing whitespace removed.
* scripts/config.guess: Update to version 2019-01-01.
* scripts/config.sub: Update to version 2019-01-01.
* scripts/move-if-change: Update from gnulib.
This patch updates files coming from tzcode to the versions in tzcode
2018i. No changes elsewhere in glibc were needed.
Tested for x86_64.
* timezone/zdump.c: Update from tzcode 2018i.
* timezone/zic.c: Likewise.
From the glibc point of view, this removes duplicate macro
definitions and is obviously safe.
From the Gnulib point of view, this pacifies xlc 12.01 on AIX 7.1.
* posix/regex_internal.h:
(__attribute__, __attribute_warn_unused_result__):
Remove; already defined elsewhere.
This commit removes the custom memcpy implementation from _int_realloc
for small chunk sizes. The ncopies variable has the wrong type, and
an integer wraparound could cause the existing code to copy too few
elements (leaving the new memory region mostly uninitialized).
Therefore, removing this code fixes bug 24027.
<asm/syscalls.h> has been removed by
commit 27f8899d6002e11a6e2d995e29b8deab5aa9cc25
Author: David Abdurachmanov <david.abdurachmanov@gmail.com>
Date: Thu Nov 8 20:02:39 2018 +0100
riscv: add asm/unistd.h UAPI header
Marcin Juszkiewicz reported issues while generating syscall table for riscv
using 4.20-rc1. The patch refactors our unistd.h files to match some other
architectures.
- Add asm/unistd.h UAPI header, which has __ARCH_WANT_NEW_STAT only for 64-bit
- Remove asm/syscalls.h UAPI header and merge to asm/unistd.h
- Adjust kernel asm/unistd.h
So now asm/unistd.h UAPI header should show all syscalls for riscv.
<asm/syscalls.h> may be restored by
Subject: [PATCH] riscv: restore asm/syscalls.h UAPI header
Date: Tue, 11 Dec 2018 09:09:35 +0100
UAPI header asm/syscalls.h was merged into UAPI asm/unistd.h header,
which did resolve issue with missing syscalls macros resulting in
glibc (2.28) build failure. It also broke glibc in a different way:
asm/syscalls.h is being used by glibc. I noticed this while doing
Fedora 30/Rawhide mass rebuild.
The patch returns asm/syscalls.h header and incl. it into asm/unistd.h.
I plan to send a patch to glibc to use asm/unistd.h instead of
asm/syscalls.h
In the meantime, we use __has_include__, which was added to GCC 5, to
check if <asm/syscalls.h> exists before including it. Tested with
build-many-glibcs.py for riscv against kernel 4.19.12 and 4.20-rc7.
[BZ #24022]
* sysdeps/unix/sysv/linux/riscv/flush-icache.c: Check if
<asm/syscalls.h> exists with __has_include__ before including it.
* hurd/lookup-retry: Include <unistd.h>.
(__hurd_file_name_lookup_retry): Keep a ref on last result in `lastdir'.
Release it on return. Handle "pid" magical lookup retry.
It has been discovered that some locales use the 12-hour time formats but
do not use any AM/PM indicator thus making the time ambiguous. This
commit adds "%p" wherever it was missing. In some cases it has been
identified that a locale should use 24-hour time format rather than
12-hour. All time formats come from CLDR but this commit introduces as
few changes as possible (for example, it tries not to change the time zone
display). For the locales which are not supported by CLDR the consistency
with similar locales (which means the same language or the same country)
has been preserved: if the time formats were the same before the change
then they are still the same after the change.
The time format updates can be roughly summarized as follows:
* Most of the locales of Djibouti, Eritrea, and Ethiopia now use
"%l:%M:%S %p".
* Most of the locales of India and some surrounding countries (Bangladesh,
Nepal etc.) now use "%I:%M:%S %p %Z".
* Most of the Arabic locales now use "%Z %I:%M:%S %p".
* Ge'ez language (Eritrea and Ethiopia) now uses "%l:%M:%S፡%p" (note the
consistent use of Ethiopic wordspace character).
* Tamil (India) now uses "%p %I:%M:%S %Z".
* Chinese (Hong Kong) t_fmt now uses "%p %I<U6642>%M<U5206>%S<U79D2> %Z".
* Additionally, the following locales have been switched from 12-hour time
formats to 24-hour, according to CLDR: Arabic (Morocco), Maltese, Somali
(Kenya), and Tamil (Sri Lanka).
* Finally, the Bulgarian, Czech, and Slovak locales used 24-hour time
format correctly but their t_fmt_ampm field was not empty containing
12-hour time format which was incorrect so it is now replaced with an
empty string.
[BZ #10496]
* localedata/locales/aa_DJ (t_fmt): Set to "%l:%M:%S %p".
(t_fmt_ampm): Likewise.
* localedata/locales/aa_ER (t_fmt): Likewise.
(t_fmt_ampm): Likewise.
* localedata/locales/aa_ER@saaho (t_fmt): Likewise.
(t_fmt_ampm): Likewise.
* localedata/locales/aa_ET (t_fmt): Likewise.
(t_fmt_ampm): Likewise.
* localedata/locales/am_ET (t_fmt): Likewise.
(t_fmt_ampm): Likewise.
* localedata/locales/byn_ER (t_fmt): Likewise.
(t_fmt_ampm): Likewise.
* localedata/locales/om_ET (t_fmt): Likewise.
(t_fmt_ampm): Likewise.
* localedata/locales/sid_ET (t_fmt): Likewise.
(t_fmt_ampm): Likewise.
* localedata/locales/so_DJ (t_fmt): Likewise.
(t_fmt_ampm): Likewise.
* localedata/locales/so_ET (t_fmt): Likewise.
(t_fmt_ampm): Likewise.
* localedata/locales/so_SO (t_fmt): Likewise.
(t_fmt_ampm): Likewise.
* localedata/locales/ti_ER (t_fmt): Likewise.
(t_fmt_ampm): Likewise.
* localedata/locales/ti_ET (t_fmt): Likewise.
(t_fmt_ampm): Likewise.
* localedata/locales/tig_ER (t_fmt): Likewise.
(t_fmt_ampm): Likewise.
* localedata/locales/wal_ET (t_fmt): Likewise.
(t_fmt_ampm): Likewise.
* localedata/locales/anp_IN (t_fmt): Set to "%I:%M:%S %p %Z".
* localedata/locales/ar_IN (t_fmt): Likewise.
* localedata/locales/bhb_IN (t_fmt): Likewise.
* localedata/locales/bho_IN (t_fmt): Likewise.
* localedata/locales/bi_VU (t_fmt): Likewise.
* localedata/locales/bn_BD (t_fmt): Likewise.
* localedata/locales/bn_IN (t_fmt): Likewise.
* localedata/locales/brx_IN (t_fmt): Likewise.
* localedata/locales/doi_IN (t_fmt): Likewise.
* localedata/locales/en_HK (t_fmt): Likewise.
(t_fmt_ampm): Likewise.
* localedata/locales/en_IN (t_fmt): Likewise.
* localedata/locales/en_PH (t_fmt): Likewise.
* localedata/locales/gu_IN (t_fmt): Likewise.
* localedata/locales/hi_IN (t_fmt): Likewise.
* localedata/locales/hif_FJ (t_fmt): Likewise.
* localedata/locales/hne_IN (t_fmt): Likewise.
* localedata/locales/kn_IN (t_fmt): Likewise.
* localedata/locales/kok_IN (t_fmt): Likewise.
* localedata/locales/ks_IN (t_fmt): Likewise.
* localedata/locales/ks_IN@devanagari (t_fmt): Likewise.
* localedata/locales/mag_IN (t_fmt): Likewise.
* localedata/locales/mai_IN (t_fmt): Likewise.
* localedata/locales/mjw_IN (t_fmt): Likewise.
* localedata/locales/ml_IN (t_fmt): Likewise.
* localedata/locales/mni_IN (t_fmt): Likewise.
* localedata/locales/mr_IN (t_fmt): Likewise.
* localedata/locales/ms_MY (t_fmt): Likewise.
* localedata/locales/pa_IN (t_fmt): Likewise.
* localedata/locales/raj_IN (t_fmt): Likewise.
* localedata/locales/sa_IN (t_fmt): Likewise.
* localedata/locales/sat_IN (t_fmt): Likewise.
* localedata/locales/sd_IN (t_fmt): Likewise.
* localedata/locales/sd_IN@devanagari (t_fmt): Likewise.
* localedata/locales/tcy_IN (t_fmt): Likewise.
* localedata/locales/the_NP (t_fmt): Likewise.
* localedata/locales/to_TO (t_fmt): Likewise.
* localedata/locales/ur_IN (t_fmt): Likewise.
* localedata/locales/hif_FJ (d_t_fmt): Set to
"%A %d %b %Y %I:%M:%S %p".
(date_fmt): Add, set to "%A %d %b %Y %I:%M:%S %p %Z".
* localedata/locales/ar_AE (t_fmt): Set to "%Z %I:%M:%S %p".
* localedata/locales/ar_BH (t_fmt): Likewise.
* localedata/locales/ar_DZ (t_fmt): Likewise.
* localedata/locales/ar_EG (t_fmt): Likewise.
* localedata/locales/ar_IQ (t_fmt): Likewise.
* localedata/locales/ar_JO (t_fmt): Likewise.
* localedata/locales/ar_KW (t_fmt): Likewise.
* localedata/locales/ar_LB (t_fmt): Likewise.
* localedata/locales/ar_LY (t_fmt): Likewise.
* localedata/locales/ar_OM (t_fmt): Likewise.
* localedata/locales/ar_QA (t_fmt): Likewise.
* localedata/locales/ar_SD (t_fmt): Likewise.
* localedata/locales/ar_SS (t_fmt): Likewise.
* localedata/locales/ar_SY (t_fmt): Likewise.
* localedata/locales/ar_TN (t_fmt): Likewise.
* localedata/locales/ar_YE (t_fmt): Likewise.
* localedata/locales/gez_ER (t_fmt): Set to "%l:%M:%S<U1361>%p".
(t_fmt_ampm): Likewise.
* localedata/locales/gez_ET (t_fmt): Likewise.
(t_fmt_ampm): Likewise.
* localedata/locales/ta_IN (t_fmt): Set to "%p %I:%M:%S %Z".
(t_fmt_ampm): Likewise.
(d_t_fmt): Set to "%A %d %B %Y %p %I:%M:%S %Z".
* localedata/locales/zh_HK (t_fmt):
Set to "%p %I<U6642>%M<U5206>%S<U79D2> %Z".
* localedata/locales/ar_MA (t_fmt_ampm): Set to "" (empty string)
because this locale does not use the 12-hour clock.
(t_fmt): Set to "%Z %H:%M:%S".
(d_t_fmt): Set to "%d %b, %Y %Z %H:%M:%S".
* localedata/locales/mt_MT (t_fmt_ampm): Set to "" (empty string)
because this locale does not use the 12-hour clock.
(t_fmt): Set to "%H:%M:%S %Z".
(d_t_fmt): Set to "%A, %d ta %b, %Y %H:%M:%S %Z".
* localedata/locales/so_KE (t_fmt_ampm): Set to "" (empty string)
because this locale does not use the 12-hour clock.
(t_fmt): Set to "%T".
(d_t_fmt): Set to "%A, %B %e, %Y %X %Z".
(date_fmt): Set to "%A, %B %e, %X %Z %Y".
* localedata/locales/ta_LK (t_fmt_ampm): Set to "" (empty string)
because this locale does not use the 12-hour clock.
(t_fmt): Set to "%H:%M:%S %Z".
(d_t_fmt): Set to "%A %d %B %Y %H:%M:%S %Z".
* localedata/locales/bg_BG (t_fmt_ampm): Set to "" (empty string)
because this locale does not use the 12-hour clock.
* localedata/locales/cs_CZ (t_fmt_ampm): Likewise.
* localedata/locales/sk_SK (t_fmt_ampm): Likewise.
Albanian locale uses the 12-hour clock but some time formats did not
use any AM/PM indicator making the time ambiguous. This commit adds
"%p" wherever it was missing.
It also sets the correct date format because the old "%Y-%b-%d" produced
rather weird results like "2018-Sht-28".
All time formats come from CLDR but as few changes have been introduced
by this commit as possible. Some articles from MSDN and other available
online sources have been also taken into account.
[BZ #10496]
[BZ #23724]
* localedata/locales/sq_AL (t_fmt): Set to "%I:%M:%S.%p %Z".
(t_fmt_ampm): Likewise.
(d_t_fmt): Set to "%a %-d %b %Y %I:%M:%S.%p".
(date_fmt): Add, set to "%a %-d %b %Y %I:%M:%S.%p %Z".
(d_fmt): Set to "%-d.%-m.%y".
This simplifies the code, by removing stuff intended for porting
to Gnulib but no longer needed there.
* posix/regcomp.c [!_LIBC]: No need to put #ifdef _LIBC around
uses of libc_hidden_def, weak_alias.
* posix/regcomp.c, posix/regexec.c: Use __restrict rather than
_Restrict_ except for public-facing headers.
* posix/regex_internal.h (attribute_hidden) [!_LIBC]:
Remove; already defined elsewhere.
* posix/regex.c, posix/regex_internal.h:
Use __GNUC_PREREQ instead of rolling our own.
* posix/regex_internal.h (__GNUC_PREREQ): Remove duplicate defn.
The current bench-strlen compares against a slow byte-oriented strlen which
is not useful given it's too easy to beat. Remove it and compare against the
generic C strlen version and memchr.
* benchtests/bench-strlen.c (generic_strlen): New function.
(memchr_strlen): New function.
The current s_sincosf.c is faster than s_sincosf-sse2.S. On Broadwell
with FMA disabled, bench-sincosf shows:
Before After Improvement
max 154.032 114.517 34%
min 6.25 5.609 11%
mean 14.8728 12.8589 15%
* sysdeps/x86_64/fpu/s_sincosf.S: Removed.
* sysdeps/x86_64/fpu/multiarch/s_sincosf-sse2.S: Likewise.
* sysdeps/x86_64/fpu/multiarch/s_sincosf-sse2.c: New file.
Add <sincosf_poly.h> and include it in s_sincosf.h to allow vectorized
sincosf_poly. Add x86 sincosf_poly.h to vectorize sincosf_poly. On
Broadwell, bench-sincosf shows:
Before After Improvement
max 160.273 114.198 40%
min 6.25 5.625 11%
mean 13.0325 10.6462 22%
Vectorized sincosf_poly shows
Before After Improvement
max 138.653 114.198 21%
min 5.004 5.625 -11%
mean 11.5934 10.6462 9%
Tested on x86-64 and i686 as well as with build-many-glibcs.py.
* sysdeps/ieee754/flt-32/s_sincosf.h: Include <sincosf_poly.h>.
(sincos_t, sincosf_poly, sinf_poly): Moved to ...
* sysdeps/ieee754/flt-32/sincosf_poly.h: Here. New file.
* sysdeps/x86/fpu/s_sincosf_data.c: New file.
* sysdeps/x86/fpu/sincosf_poly.h: Likewise.
* sysdeps/x86_64/fpu/multiarch/s_sincosf-fma.c: Just include
<sysdeps/ieee754/flt-32/s_sincosf.c>.
The recent difftime changes introduced localplt test failures on nios2
and sparc32, two configurations where some soft-fp functions are
defined in / exported from libc.so, and where the difftime changes
affected the particular set of floating-point operations used in
libc.so. This patch adds those functions to localplt.data, alongside
other such functions already there. (In the sparc32 case, and more
generally on any platform where long double is a software
floating-point type, it would probably be more efficient to avoid
using long double at all in difftime, but that's a pre-existing
issue.)
Tested with build-many-glibcs.py for its nios2 and sparcv9
configurations.
[BZ #24023]
* sysdeps/unix/sysv/linux/nios2/localplt.data: Allow __floatundidf
PLT reference in libc.so.
* sysdeps/unix/sysv/linux/sparc/sparc32/localplt.data: Allow
_Q_lltoq and _Q_qtod PLT references in libc.so.
This patch updates longlong.h from GCC. There were no local changes
in glibc (the previous version was identical to the r232143 GCC
version, apart from copyright dates which had been updated in both
places), so this patch makes it identical to the version in GCC again.
Tested for x86_64 and x86. Also tested with build-many-glibcs.py for
its RISC-V configurations, as the glibc architecture with the most
substantial changes in longlong.h in this patch.
* stdlib/longlong.h: Update from GCC.
We know that building glibc with GCC 4.9 is broken on various
platforms (bug 23993). As it's more than a year since we last
increased the minimum GCC version to build glibc, this patch changes
the requirement to be GCC 5 or later (indeed, based on 4.9 having been
required for building 2.26, it would be consistent in terms of timing
to require GCC 6 or later from the 2.30 release onwards). It
deliberately just updates the configure test and corresponding
documentation, leaving removal of no-longer-needed __GNUC_PREREQ tests
for a separate patch.
In the NEWS entry, the requirement for a newer GCC version for
powerpc64le is reiterated (as in the entry for the 4.9 requirement in
2.26) to avoid suggesting the version requirement there has gone down.
(If that version goes up further as part of support for binary128 long
double, of course the wording would change at that time.)
Tested for x86_64.
[BZ #23993]
* configure.ac (libc_cv_compiler_ok): Require GCC 5 or later.
* configure: Regenerated.
* manual/install.texi (Tools for Compilation): Update minimum GCC
version.
* INSTALL: Regenerated.
Provide a 64-bit-time version of __difftime (but do not assume
__time64_t is a signed int so that Gnulib can reuse the code)
and make the 32-bit version a wrapper of it.
Current difftime expects two time_t arguments and returns a
double. To preserve source-code compatibility, its 64-bit-time
equivalent expects two __time64_t arguments but still returns
a double.
This patch was tested by running 'make check' on branch
master then applying this patch and its two predecessors and
running 'make check' again, and checking that both 'make check'
yield identical results. This was done on x86_64-linux-gnu and
i686-linux-gnu.
This patch was also functionally tested with an ad hoc userland
C program which checks the result of difftime for various pairs
of 32-bit and, for 64-bit builds, of 64-bit time_t values too.
The program was built and run against a glibc with and without
the patch, and the results compared to ensure the patch does
not change the behavior of difftime.
* include/time.h (__difftime64): Add.
* time/difftime.c (subtract): convert to 64-bit time.
* time/difftime.c (__difftime64): Add.
* time/difftime.c (__difftime): Wrap around __difftime64.
After previous cleanups, the only code in the x86 bits/mathinline.h
that is relevant with current compilers is the inline of
__ieee754_atan2l that is conditional on __LIBC_INTERNAL_MATH_INLINES
(i.e. for when libm itself is being built).
This inline is something that does belong in glibc not GCC, since
__ieee754_atan2l is a purely internal function name. This patch moves
that inline to a new sysdeps/x86/fpu/math_private.h, removing the
bits/mathinline.h header.
Note that previously the inline was only for non-SSE 32-bit x86. That
condition does not make sense, however, for a long double function; if
it's not inlined, exactly the same x87 instruction will end up getting
used by the out-of-line function, for both 32-bit and 64-bit. So that
condition is not retained in the new version.
Tested for x86_64 and x86. As expected, installed stripped shared
libraries are unchanged for 32-bit x86, but installed stripped libm.so
is changed for x86_64 because calls to __ieee754_atan2l start being
inlined where previously they were out of line calls. (The same
change to start inlining the function would presumably also apply for
32-bit built with -mfpmath=sse, but that's not a configuration I've
tested.)
* sysdeps/x86/fpu/math_private.h: New file.
* sysdeps/x86/fpu/bits/mathinline.h: Remove.
Continuing the removal of bits/mathinline.h inlines that would better
be done by the compiler, this patch removes x86 inlines for sinh, cosh
and tanh functions (inlines only previously present for fast-math,
non-SSE 32-bit x86). I've filed
<https://gcc.gnu.org/bugzilla/show_bug.cgi?id=88556> for adding such
inlines as an optimization in GCC.
I believe the only remaining part of the x86 bits/mathinline.h that
does anything useful with current compilers after this patch is the
__LIBC_INTERNAL_MATH_INLINES inline of __ieee754_atan2l; I intend to
remove the whole header and move that inline to a sysdeps
math_private.h header in a subsequent patch.
Tested for x86_64 and x86.
* sysdeps/x86/fpu/bits/mathinline.h (sinh): Remove inline
definition.
(cosh): Likewise.
(tanh): Likewise.
Add support for AT_L1I_CACHESIZE, AT_L1I_CACHEGEOMETRY,
AT_L1D_CACHESIZE, AT_L1D_CACHEGEOMETRY, AT_L2_CACHESIZE,
AT_L2_CACHEGEOMETRY, AT_L3_CACHESIZE and AT_L3_CACHEGEOMETRY when
LD_SHOW_AUXV=1.
AT_L*_CACHESIZE is printed as decimal and represent the number of
bytes of the cache.
AT_L*_CACHEGEOMETRY is treated in order to specify the cache line size
and its associativity.
Example output from a POWER8:
AT_L1I_CACHESIZE: 32768
AT_L1I_CACHEGEOMETRY: 128B line size, 8-way set associative
AT_L1D_CACHESIZE: 65536
AT_L1D_CACHEGEOMETRY: 128B line size, 8-way set associative
AT_L2_CACHESIZE: 524288
AT_L2_CACHEGEOMETRY: 128B line size, 8-way set associative
AT_L3_CACHESIZE: 8388608
AT_L3_CACHEGEOMETRY: 128B line size, 8-way set associative
Some of the new types are longer than the previous ones, requiring to
increase the indentation in order to keep the values aligned.
* elf/dl-sysdep.c (auxvars): Add AT_L1I_CACHESIZE,
AT_L1I_CACHEGEOMETRY, AT_L1D_CACHESIZE, AT_L1D_CACHEGEOMETRY,
AT_L2_CACHESIZE, AT_L2_CACHEGEOMETRY, AT_L3_CACHESIZE and
AT_L3_CACHEGEOMETRY. Fix indentation when printing the other
fields.
(_dl_show_auxv): Give a special treatment to
AT_L1I_CACHEGEOMETRY, AT_L1D_CACHEGEOMETRY, AT_L2_CACHEGEOMETRY
and AT_L3_CACHEGEOMETRY.
* sysdeps/powerpc/dl-procinfo.h (cache_geometry): New function.
(_dl_procinfo): Fix indentation when printing AT_HWCAP and
AT_HWCAP2. Add support for AT_L1I_CACHEGEOMETRY,
AT_L1D_CACHEGEOMETRY, AT_L2_CACHEGEOMETRY and AT_L3_CACHEGEOMETRY.
Signed-off-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Tested with 'make check' on x86_64-linux-gnu and i686-linux.gnu.
* include/time.h
(__ctime64_r): Add.
* time/ctime_r.c
(__ctime64_r): Add.
[__TIMESIZE != 64] (__ctime_r): Turn into a wrapper.
Tested with 'make check' on x86_64-linux-gnu and i686-linux.gnu.
* include/time.h
(__ctime64): Add.
* time/gmtime.c
(__ctime64): Add.
[__TIMESIZE != 64] (ctime): Turn into a wrapper.
Tested with 'make check' on x86_64-linux-gnu and i686-linux.gnu.
* include/time.h
(__gmtime64_r): Add.
* time/gmtime.c
(__gmtime64_r): Add.
[__TIMESIZE != 64] (__gmtime): Turn into a wrapper.
Tested with 'make check' on x86_64-linux-gnu and i686-linux.gnu.
* include/time.h
(__gmtime64): Add.
* time/gmtime.c
(__gmtime64): Add.
[__TIMESIZE != 64] (__gmtime): Turn into a wrapper.
Tested with 'make check' on x86_64-linux-gnu and i686-linux.gnu.
* include/time.h
(__localtime64_r): Add.
* time/localtime.c
(__localtime64_r): Add.
[__TIMESIZE != 64] (__localtime_r): Turn into a wrapper.
S390 kernel sigaction is the same as the Linux generic one.
Checked with a s390-linux-gnu and s390x-linux-gnu build.
* sysdeps/unix/sysv/linux/s390/kernel_sigaction.h: Use Linux generic
kernel_sigction definition.
IA64 kernel_sigaction.h definition is the sama as the Linux generic
one.
Checked on ia64-linux-gnu.
* sysdeps/unix/sysv/linux/ia64/kernel_sigaction.h: Remove file.
HPPA kernel_sigaction.h definition is the sama as the Linux generic
one and old_kernel_sigaction is not used.
Checked on hppa-linux-gnu.
* sysdeps/unix/sysv/linux/hppa/kernel_sigaction.h: Remove file.
Alpha rt_sigaction syscall uses a slight different kernel ABI than
generic one:
arch/alpha/kernel/signal.c
90 SYSCALL_DEFINE5(rt_sigaction, int, sig, const struct sigaction __user *, act,
91 struct sigaction __user *, oact,
92 size_t, sigsetsize, void __user *, restorer)
Similar as sparc, the syscall expects a restorer function. However
different than sparc, alpha defines the restorer as the 5th argument
(sparc defines as the 4th).
This patch removes the arch-specific alpha sigaction implementation,
adapt the Linux generic one to different restore placements (through
STUB macro), and make alpha use the Linux generic kernel_sigaction
definition.
Checked on alpha-linux-gnu and x86_64-linux-gnu (for sanity).
* sysdeps/unix/sysv/linux/alpha/Makefile: Update comment about
__syscall_rt_sigaction.
* sysdeps/unix/sysv/linux/alpha/kernel_sigaction.h
(kernel_sigaction): Use Linux generic defintion.
(STUB): Define.
(__syscall_rt_sigreturn, __syscall_sigreturn): Add prototype.
* sysdeps/unix/sysv/linux/alpha/rt_sigaction.S
(__syscall_rt_sigaction): Remove implementation.
(__syscall_sigreturn, __syscall_rt_sigreturn): Define as global and
hidden.
* sysdeps/unix/sysv/linux/alpha/sigaction.c: Remove file.
* sysdeps/unix/sysv/linux/alpha/sysdep.h (INLINE_SYSCALL,
INTERNAL_SYSCALL): Remove definitions.
* sysdeps/unix/sysv/linux/sigaction.c: Define STUB to accept both the
action and signal set size.
* sysdeps/unix/sysv/linux/sparc/sparc32/sigaction.c (STUB): Redefine.
* sysdeps/unix/sysv/linux/sparc/sparc64/sigaction.c (STUB): Likewise.
Commit b4a5d26d88 (linux: Consolidate sigaction implementation) added
a wrong kernel_sigaction definition for m68k, meant for __NR_sigaction
instead of __NR_rt_sigaction as used on generic Linux sigaction
implementation. This patch fixes it by using the Linux generic
definition meant for the RT kernel ABI.
Checked the signal tests on emulated m68-linux-gnu (Aranym). It fixes
the faulty signal/tst-sigaction and man works as expected.
Adhemerval Zanella <adhemerval.zanella@linaro.org>
James Clarke <jrtc27@jrtc27.com>
[BZ #23960]
* sysdeps/unix/sysv/linux/kernel_sigaction.h (HAS_SA_RESTORER):
Define if SA_RESTORER is defined.
(kernel_sigaction): Define sa_restorer if HAS_SA_RESTORER is defined.
(SET_SA_RESTORER, RESET_SA_RESTORER): Define iff the macro are not
already defined.
* sysdeps/unix/sysv/linux/m68k/kernel_sigaction.h (SA_RESTORER,
kernel_sigaction, SET_SA_RESTORER, RESET_SA_RESTORER): Remove
definitions.
(HAS_SA_RESTORER): Define.
* sysdeps/unix/sysv/linux/sparc/kernel_sigaction.h (SA_RESTORER,
SET_SA_RESTORER, RESET_SA_RESTORER): Remove definition.
(HAS_SA_RESTORER): Define.
* sysdeps/unix/sysv/linux/nios2/kernel_sigaction.h: Include generic
kernel_sigaction after define SET_SA_RESTORER and RESET_SA_RESTORER.
* sysdeps/unix/sysv/linux/powerpc/kernel_sigaction.h: Likewise.
* sysdeps/unix/sysv/linux/x86_64/sigaction.c: Likewise.
kernel-features.h has a macro __ASSUME_ST_INO_64_BIT, with a comment
"However, SH is lame, and still does not have a 64-bit inode field.".
The macro is, in fact, defined to 0 by Alpha as well as SH. The Alpha
case is, however, trivially useless: none of the files that test
__ASSUME_ST_INO_64_BIT are built for Alpha (which gained kernel
support for stat64 syscalls, with a 64-bit st_ino field, in Linux
2.6.4; the define to 0 for Alpha in glibc predates that).
The SH kernel gained support for a 64-bit st_ino in struct stat64 in
commit 760bcb1deec13c50e20399c84cb6a8ea41cc2820 ("sh: Fix fstatat64()
syscall."), which is in Linux 2.6.22 and later. So the redefinition
of __ASSUME_ST_INO_64_BIT to 0 is of no use for SH either; three of
the files testing it do so immediately after a stat64-family syscall
has been used, which will always have set the 64-bit st_ino correctly
(in addition to the 32-bit __st_ino), while the relevant code
__xstat32_conv executes only after such a syscall in the function
calling __xstat32_conv.
Thus this patch removes __ASSUME_ST_INO_64_BIT and code testing it.
Removing the useless [!__ASSUME_ST_INO_64_BIT] code in __xstat32_conv
renders the [_HAVE_STAT64___ST_INO] and [!_HAVE_STAT64___ST_INO] cases
around it identical, so that conditional is also removed.
Tested compilation with build-many-glibcs.py for its Alpha and SH
configurations; also ran the glibc testsuite for x86_64 and x86.
* sysdeps/unix/sysv/linux/kernel-features.h
(__ASSUME_ST_INO_64_BIT): Remove macro definition.
* sysdeps/unix/sysv/linux/alpha/kernel-features.h
(__ASSUME_ST_INO_64_BIT): Do not undefine and define.
* sysdeps/unix/sysv/linux/sh/kernel-features.h
(__ASSUME_ST_INO_64_BIT): Likewise.
* sysdeps/unix/sysv/linux/fxstat64.c: Do not include
<kernel-features.h>.
(___fxstat64) [_HAVE_STAT64___ST_INO && !__ASSUME_ST_INO_64_BIT]:
Remove conditional code.
* sysdeps/unix/sysv/linux/lxstat64.c: Do not include
<kernel-features.h>.
(___lxstat64) [_HAVE_STAT64___ST_INO && !__ASSUME_ST_INO_64_BIT]:
Remove conditional code.
* sysdeps/unix/sysv/linux/xstat64.c: Do not include
<kernel-features.h>.
(___xstat64) [_HAVE_STAT64___ST_INO && !__ASSUME_ST_INO_64_BIT]:
Remove conditional code.
* sysdeps/unix/sysv/linux/xstatconv.c: Do not include
<kernel-features.h>.
(__xstat32_conv) [_HAVE_STAT64___ST_INO]: Remove conditional code.
[!_HAVE_STAT64___ST_INO]: Make code unconditional.
The ifunc macros s390_vx_libc* are no longer used and
can be removed as all users are now relying on
s390_libc_ifunc_expr.
The same applies to s390_libc_ifunc. The macro
s390_libc_ifunc_init is now renamed to
s390_libc_ifunc_expr_stfle_init and the users are
adjusted accordingly.
ChangeLog:
* sysdeps/s390/multiarch/ifunc-resolve.h
(s390_vx_libc_ifunc, s390_vx_libc_ifunc_redirected,
s390_vx_libc_ifunc2, s390_vx_libc_ifunc_init,
s390_vx_libc_ifunc2_redirected, s390_libc_ifunc):
Delete macro definition.
(s390_libc_ifunc_init): Rename to
s390_libc_ifunc_expr_stfle_init.
* sysdeps/s390/bzero: Use
s390_libc_ifunc_expr_stfle_init instead of
s390_libc_ifunc_init.
* sysdeps/s390/memcmp.c: Likewise.
* sysdeps/s390/memcpy.c: Likewise.
* sysdeps/s390/mempcpy.c: Likewise.
* sysdeps/s390/memset.c: Likewise.
The ifunc handling for various __gconv_transform_* functions
which are using IFUNC on s390x are adjusted in order to omit ifunc
if the minimum architecture level already supports newer CPUs by default.
Instead those functions are just an alias to the vector variants.
Furthermore the ifunc-macro s390_libc_ifunc_expr is now used instead of
s390_vx_libc_ifunc.
ChangeLog:
* sysdeps/s390/multiarch/gconv_simple.c (ICONV_VX_IFUNC):
Define macro dependent on HAVE_S390_MIN_Z13_ZARCH_ASM_SUPPORT.
The ifunc handling for wmemcmp is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove wmemcmp variants.
* sysdeps/s390/Makefile (sysdep_routines): Add wmemcmp variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for wmemcmp.
* sysdeps/s390/multiarch/wmemcmp-c.c: Move to ...
* sysdeps/s390/wmemcmp-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wmemcmp-vx.S: Move to ...
* sysdeps/s390/wmemcmp-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wmemcmp.c: Move to ...
* sysdeps/s390/wmemcmp.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-wmemcmp.h: New file.
The ifunc handling for wmemset is adjusted in order to omit ifunc
if the minimum architecture level already supports newer CPUs by default.
Unfortunately the c ifunc variant can't be omitted at all as it is used
by the z13 ifunc variant as fallback if the pointers are not 4-byte aligned.
Glibc internal calls will use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove wmemset variants.
* sysdeps/s390/Makefile (sysdep_routines): Add wmemset variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for wmemset.
* sysdeps/s390/multiarch/wmemset-c.c: Move to ...
* sysdeps/s390/wmemset-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wmemset-vx.S: Move to ...
* sysdeps/s390/wmemset-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wmemset.c: Move to ...
* sysdeps/s390/wmemset.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-wmemset.h: New file.
The ifunc handling for wmemchr is adjusted in order to omit ifunc
if the minimum architecture level already supports newer CPUs by default.
Unfortunately the c ifunc variant can't be omitted at all as it is used
by the z13 ifunc variant as fallback if the pointers are not 4-byte aligned.
Glibc internal calls will use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove wmemchr variants.
* sysdeps/s390/Makefile (sysdep_routines): Add wmemchr variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for wmemchr.
* sysdeps/s390/multiarch/wmemchr-c.c: Move to ...
* sysdeps/s390/wmemchr-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wmemchr-vx.S: Move to ...
* sysdeps/s390/wmemchr-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wmemchr.c: Move to ...
* sysdeps/s390/wmemchr.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-wmemchr.h: New file.
The ifunc handling for wcscspn is adjusted in order to omit ifunc
if the minimum architecture level already supports newer CPUs by default.
Unfortunately the c ifunc variant can't be omitted at all as it is used
by the z13 ifunc variant as fallback if the pointers are not 4-byte aligned.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove wcscspn variants.
* sysdeps/s390/Makefile (sysdep_routines): Add wcscspn variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for wcscspn.
* sysdeps/s390/multiarch/wcscspn-c.c: Move to ...
* sysdeps/s390/wcscspn-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcscspn-vx.S: Move to ...
* sysdeps/s390/wcscspn-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcscspn.c: Move to ...
* sysdeps/s390/wcscspn.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-wcscspn.h: New file.
The ifunc handling for wcspbrk is adjusted in order to omit ifunc
if the minimum architecture level already supports newer CPUs by default.
Unfortunately the c ifunc variant can't be omitted at all as it is used
by the z13 ifunc variant as fallback if the pointers are not 4-byte aligned.
Glibc internal calls will use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove wcspbrk variants.
* sysdeps/s390/Makefile (sysdep_routines): Add wcspbrk variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for wcspbrk.
* sysdeps/s390/multiarch/wcspbrk-c.c: Move to ...
* sysdeps/s390/wcspbrk-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcspbrk-vx.S: Move to ...
* sysdeps/s390/wcspbrk-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcspbrk.c: Move to ...
* sysdeps/s390/wcspbrk.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-wcspbrk.h: New file.
The ifunc handling for wcsspn is adjusted in order to omit ifunc
if the minimum architecture level already supports newer CPUs by default.
Unfortunately the c ifunc variant can't be omitted at all as it is used
by the z13 ifunc variant as fallback if the pointers are not 4-byte aligned.
Glibc internal calls will use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove wcsspn variants.
* sysdeps/s390/Makefile (sysdep_routines): Add wcsspn variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for wcsspn.
* sysdeps/s390/multiarch/wcsspn-c.c: Move to ...
* sysdeps/s390/wcsspn-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcsspn-vx.S: Move to ...
* sysdeps/s390/wcsspn-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcsspn.c: Move to ...
* sysdeps/s390/wcsspn.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-wcsspn.h: New file.
The ifunc handling for wcsrchr is adjusted in order to omit ifunc
if the minimum architecture level already supports newer CPUs by default.
Unfortunately the c ifunc variant can't be omitted at all as it is used
by the z13 ifunc variant as fallback if the pointers are not 4-byte aligned.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove wcsrchr variants.
* sysdeps/s390/Makefile (sysdep_routines): Add wcsrchr variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for wcsrchr.
* sysdeps/s390/multiarch/wcsrchr-c.c: Move to ...
* sysdeps/s390/wcsrchr-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcsrchr-vx.S: Move to ...
* sysdeps/s390/wcsrchr-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcsrchr.c: Move to ...
* sysdeps/s390/wcsrchr.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-wcsrchr.h: New file.
The ifunc handling for wcschrnul is adjusted in order to omit ifunc
if the minimum architecture level already supports newer CPUs by default.
Unfortunately the c ifunc variant can't be omitted at all as it is used
by the z13 ifunc variant as fallback if the pointers are not 4-byte aligned.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove wcschrnul variants.
* sysdeps/s390/Makefile (sysdep_routines): Add wcschrnul variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for wcschrnul.
* sysdeps/s390/multiarch/wcschrnul-c.c: Move to ...
* sysdeps/s390/wcschrnul-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcschrnul-vx.S: Move to ...
* sysdeps/s390/wcschrnul-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcschrnul.c: Move to ...
* sysdeps/s390/wcschrnul.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-wcschrnul.h: New file.
The ifunc handling for wcschr is adjusted in order to omit ifunc
if the minimum architecture level already supports newer CPUs by default.
Unfortunately the c ifunc variant can't be omitted at all as it is used
by the z13 ifunc variant as fallback if the pointers are not 4-byte aligned.
Glibc internal calls will use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove wcschr variants.
* sysdeps/s390/Makefile (sysdep_routines): Add wcschr variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for wcschr.
* sysdeps/s390/multiarch/wcschr-c.c: Move to ...
* sysdeps/s390/wcschr-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcschr-vx.S: Move to ...
* sysdeps/s390/wcschr-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcschr.c: Move to ...
* sysdeps/s390/wcschr.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-wcschr.h: New file.
The ifunc handling for wcsncmp is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove wcsncmp variants.
* sysdeps/s390/Makefile (sysdep_routines): Add wcsncmp variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for wcsncmp.
* sysdeps/s390/multiarch/wcsncmp-c.c: Move to ...
* sysdeps/s390/wcsncmp-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcsncmp-vx.S: Move to ...
* sysdeps/s390/wcsncmp-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcsncmp.c: Move to ...
* sysdeps/s390/wcsncmp.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-wcsncmp.h: New file.
The ifunc handling for wcscmp is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove wcscmp variants.
* sysdeps/s390/Makefile (sysdep_routines): Add wcscmp variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for wcscmp.
* sysdeps/s390/multiarch/wcscmp-c.c: Move to ...
* sysdeps/s390/wcscmp-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcscmp-vx.S: Move to ...
* sysdeps/s390/wcscmp-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcscmp.c: Move to ...
* sysdeps/s390/wcscmp.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-wcscmp.h: New file.
The ifunc handling for wcsncat is adjusted in order to omit ifunc
if the minimum architecture level already supports newer CPUs by default.
Unfortunately the c ifunc variant can't be omitted at all as it is used
by the z13 ifunc variant as fallback if the pointers are not 4-byte aligned.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove wcsncat variants.
* sysdeps/s390/Makefile (sysdep_routines): Add wcsncat variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for wcsncat.
* sysdeps/s390/multiarch/wcsncat-c.c: Move to ...
* sysdeps/s390/wcsncat-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcsncat-vx.S: Move to ...
* sysdeps/s390/wcsncat-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcsncat.c: Move to ...
* sysdeps/s390/wcsncat.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-wcsncat.h: New file.
The ifunc handling for wcscat is adjusted in order to omit ifunc
if the minimum architecture level already supports newer CPUs by default.
Unfortunately the c ifunc variant can't be omitted at all as it is used
by the z13 ifunc variant as fallback if the pointers are not 4-byte aligned.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove wcscat variants.
* sysdeps/s390/Makefile (sysdep_routines): Add wcscat variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for wcscat.
* sysdeps/s390/multiarch/wcscat-c.c: Move to ...
* sysdeps/s390/wcscat-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcscat-vx.S: Move to ...
* sysdeps/s390/wcscat-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcscat.c: Move to ...
* sysdeps/s390/wcscat.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-wcscat.h: New file.
The ifunc handling for wcpncpy is adjusted in order to omit ifunc
if the minimum architecture level already supports newer CPUs by default.
Unfortunately the c ifunc variant can't be omitted at all as it is used
by the z13 ifunc variant as fallback if the pointers are not 4-byte aligned.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove wcpncpy variants.
* sysdeps/s390/Makefile (sysdep_routines): Add wcpncpy variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for wcpncpy.
* sysdeps/s390/multiarch/wcpncpy-c.c: Move to ...
* sysdeps/s390/wcpncpy-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcpncpy-vx.S: Move to ...
* sysdeps/s390/wcpncpy-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcpncpy.c: Move to ...
* sysdeps/s390/wcpncpy.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-wcpncpy.h: New file.
The ifunc handling for wcsncpy is adjusted in order to omit ifunc
if the minimum architecture level already supports newer CPUs by default.
Unfortunately the c ifunc variant can't be omitted at all as it is used
by the z13 ifunc variant as fallback if the pointers are not 4-byte aligned.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove wcsncpy variants.
* sysdeps/s390/Makefile (sysdep_routines): Add wcsncpy variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for wcsncpy.
* sysdeps/s390/multiarch/wcsncpy-c.c: Move to ...
* sysdeps/s390/wcsncpy-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcsncpy-vx.S: Move to ...
* sysdeps/s390/wcsncpy-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcsncpy.c: Move to ...
* sysdeps/s390/wcsncpy.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-wcsncpy.h: New file.
The ifunc handling for wcpcpy is adjusted in order to omit ifunc
if the minimum architecture level already supports newer CPUs by default.
Unfortunately the c ifunc variant can't be omitted at all as it is used
by the z13 ifunc variant as fallback if the pointers are not 4-byte aligned.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove wcpcpy variants.
* sysdeps/s390/Makefile (sysdep_routines): Add wcpcpy variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for wcpcpy.
* sysdeps/s390/multiarch/wcpcpy-c.c: Move to ...
* sysdeps/s390/wcpcpy-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcpcpy-vx.S: Move to ...
* sysdeps/s390/wcpcpy-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcpcpy.c: Move to ...
* sysdeps/s390/wcpcpy.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-wcpcpy.h: New file.
The ifunc handling for wcscpy is adjusted in order to omit ifunc
if the minimum architecture level already supports newer CPUs by default.
Unfortunately the c ifunc variant can't be omitted at all as it is used
by the z13 ifunc variant as fallback if the pointers are not 4-byte aligned.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove wcscpy variants.
* sysdeps/s390/Makefile (sysdep_routines): Add wcscpy variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for wcscpy.
* sysdeps/s390/multiarch/wcscpy-c.c: Move to ...
* sysdeps/s390/wcscpy-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcscpy-vx.S: Move to ...
* sysdeps/s390/wcscpy-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcscpy.c: Move to ...
* sysdeps/s390/wcscpy.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-wcscpy.h: New file.
The ifunc handling for wcsnlen is adjusted in order to omit ifunc
if the minimum architecture level already supports newer CPUs by default.
Unfortunately the c ifunc variant can't be omitted at all as it is used
by the z13 ifunc variant as fallback if the pointers are not 4-byte aligned.
Glibc internal calls will use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove wcsnlen variants.
* sysdeps/s390/Makefile (sysdep_routines): Add wcsnlen variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for wcsnlen.
* sysdeps/s390/multiarch/wcsnlen-c.c: Move to ...
* sysdeps/s390/wcsnlen-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcsnlen-vx.S: Move to ...
* sysdeps/s390/wcsnlen-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcsnlen.c: Move to ...
* sysdeps/s390/wcsnlen.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-wcsnlen.h: New file.
The ifunc handling for wcslen is adjusted in order to omit ifunc
if the minimum architecture level already supports newer CPUs by default.
Unfortunately the c ifunc variant can't be omitted at all as it is used
by the z13 ifunc variant as fallback if the pointers are not 4-byte aligned.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove wcslen variants.
* sysdeps/s390/Makefile (sysdep_routines): Add wcslen variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for wcslen.
* sysdeps/s390/multiarch/wcslen-c.c: Move to ...
* sysdeps/s390/wcslen-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcslen-vx.S: Move to ...
* sysdeps/s390/wcslen-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcslen.c: Move to ...
* sysdeps/s390/wcslen.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-wcslen.h: New file.
The ifunc handling for memrchr is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove memrchr variants.
* sysdeps/s390/Makefile (sysdep_routines): Add memrchr variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for memrchr.
* sysdeps/s390/multiarch/memrchr-c.c: Move to ...
* sysdeps/s390/memrchr-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/memrchr-vx.S: Move to ...
* sysdeps/s390/memrchr-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/memrchr.c: Move to ...
* sysdeps/s390/memrchr.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-memrchr.h: New file.
The ifunc handling for memccpy is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove memccpy variants.
* sysdeps/s390/Makefile (sysdep_routines): Add memccpy variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for memccpy.
* sysdeps/s390/multiarch/memccpy-c.c: Move to ...
* sysdeps/s390/memccpy-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/memccpy-vx.S: Move to ...
* sysdeps/s390/memccpy-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/memccpy.c: Move to ...
* sysdeps/s390/memccpy.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-memccpy.h: New file.
The ifunc handling for rawmemchr is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove rawmemchr variants.
* sysdeps/s390/Makefile (sysdep_routines): Add rawmemchr variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for rawmemchr.
* sysdeps/s390/multiarch/rawmemchr-c.c: Move to ...
* sysdeps/s390/rawmemchr-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/rawmemchr-vx.S: Move to ...
* sysdeps/s390/rawmemchr-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/rawmemchr.c: Move to ...
* sysdeps/s390/rawmemchr.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-rawmemchr.h: New file.
The ifunc handling for memchr is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
Note: The fallback s390-32/s390-64 ifunc variants with srst instruction
are now moved to the unified memchr-z900.S file which can be used for
31/64bit. The s390-32/s390-64 files multiarch/memchr.c and memchr.S
are deleted.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove memchr variants.
* sysdeps/s390/Makefile (sysdep_routines): Add memchr variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for memchr.
* sysdeps/s390/multiarch/memchr-vx.S: Move to ...
* sysdeps/s390/memchr-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/memchr.c: Move to ...
* sysdeps/s390/memchr.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-memchr.h: New file.
* sysdeps/s390/s390-64/memchr.S: Move to ...
* sysdeps/s390/memchr-z900.S: ... here and adjust to be usable
for 31/64bit and ifunc handling.
* sysdeps/s390/s390-32/multiarch/memchr.c: Delete file.
* sysdeps/s390/s390-64/multiarch/memchr.c: Likewise.
* sysdeps/s390/s390-32/memchr.S: Likewise.
The ifunc handling for strcspn is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove strcspn variants.
* sysdeps/s390/Makefile (sysdep_routines): Add strcspn variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for strcspn.
* sysdeps/s390/multiarch/strcspn-c.c: Move to ...
* sysdeps/s390/strcspn-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strcspn-vx.S: Move to ...
* sysdeps/s390/strcspn-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strcspn.c: Move to ...
* sysdeps/s390/strcspn.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-strcspn.h: New file.
The ifunc handling for strpbrk is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove strpbrk variants.
* sysdeps/s390/Makefile (sysdep_routines): Add strpbrk variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for strpbrk.
* sysdeps/s390/multiarch/strpbrk-c.c: Move to ...
* sysdeps/s390/strpbrk-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strpbrk-vx.S: Move to ...
* sysdeps/s390/strpbrk-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strpbrk.c: Move to ...
* sysdeps/s390/strpbrk.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-strpbrk.h: New file.
The ifunc handling for strspn is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove strspn variants.
* sysdeps/s390/Makefile (sysdep_routines): Add strspn variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for strspn.
* sysdeps/s390/multiarch/strspn-c.c: Move to ...
* sysdeps/s390/strspn-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strspn-vx.S: Move to ...
* sysdeps/s390/strspn-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strspn.c: Move to ...
* sysdeps/s390/strspn.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-strspn.h: New file.
The ifunc handling for strrchr is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove strrchr variants.
* sysdeps/s390/Makefile (sysdep_routines): Add strrchr variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for strrchr.
* sysdeps/s390/multiarch/strrchr-c.c: Move to ...
* sysdeps/s390/strrchr-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strrchr-vx.S: Move to ...
* sysdeps/s390/strrchr-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strrchr.c: Move to ...
* sysdeps/s390/strrchr.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-strrchr.h: New file.
The ifunc handling for strchrnul is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove strchrnul variants.
* sysdeps/s390/Makefile (sysdep_routines): Add strchrnul variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for strchrnul.
* sysdeps/s390/multiarch/strchrnul-c.c: Move to ...
* sysdeps/s390/strchrnul-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strchrnul-vx.S: Move to ...
* sysdeps/s390/strchrnul-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strchrnul.c: Move to ...
* sysdeps/s390/strchrnul.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-strchrnul.h: New file.
The ifunc handling for strchr is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove strchr variants.
* sysdeps/s390/Makefile (sysdep_routines): Add strchr variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for strchr.
* sysdeps/s390/multiarch/strchr-c.c: Move to ...
* sysdeps/s390/strchr-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strchr-vx.S: Move to ...
* sysdeps/s390/strchr-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strchr.c: Move to ...
* sysdeps/s390/strchr.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-strchr.h: New file.
The ifunc handling for strncmp is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove strncmp variants.
* sysdeps/s390/Makefile (sysdep_routines): Add strncmp variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for strncmp.
* sysdeps/s390/multiarch/strncmp-c.c: Move to ...
* sysdeps/s390/strncmp-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strncmp-vx.S: Move to ...
* sysdeps/s390/strncmp-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strncmp.c: Move to ...
* sysdeps/s390/strncmp.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-strncmp.h: New file.
The ifunc handling for strcmp is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
Note: The fallback s390-32/s390-64 ifunc variants with clst instruction
are now moved to the unified strcmp-z900.S file which can be used for
31/64bit. The s390-32/s390-64 files multiarch/strcmp.c and strcmp.S
are deleted.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove strcmp variants.
* sysdeps/s390/Makefile (sysdep_routines): Add strcmp variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for strcmp.
* sysdeps/s390/multiarch/strcmp-vx.S: Move to ...
* sysdeps/s390/strcmp-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strcmp.c: Move to ...
* sysdeps/s390/strcmp.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-strcmp.h: New file.
* sysdeps/s390/s390-64/strcmp.S: Move to ...
* sysdeps/s390/strcmp-z900.S: ... here and adjust to be usable
for 31/64bit and ifunc handling.
* sysdeps/s390/s390-32/multiarch/strcmp.c: Delete file.
* sysdeps/s390/s390-64/multiarch/strcmp.c: Likewise.
* sysdeps/s390/s390-32/strcmp.S: Likewise.
The ifunc handling for strncat is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove strncat variants.
* sysdeps/s390/Makefile (sysdep_routines): Add strncat variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for strncat.
* sysdeps/s390/multiarch/strncat-c.c: Move to ...
* sysdeps/s390/strncat-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strncat-vx.S: Move to ...
* sysdeps/s390/strncat-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strncat.c: Move to ...
* sysdeps/s390/strncat.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-strncat.h: New file.
The ifunc handling for strcat is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove strcat variants.
* sysdeps/s390/Makefile (sysdep_routines): Add strcat variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for strcat.
* sysdeps/s390/multiarch/strcat-c.c: Move to ...
* sysdeps/s390/strcat-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strcat-vx.S: Move to ...
* sysdeps/s390/strcat-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strcat.c: Move to ...
* sysdeps/s390/strcat.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-strcat.h: New file.
The ifunc handling for stpncpy is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove stpncpy variants.
* sysdeps/s390/Makefile (sysdep_routines): Add stpncpy variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for stpncpy.
* sysdeps/s390/multiarch/stpncpy-c.c: Move to ...
* sysdeps/s390/stpncpy-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/stpncpy-vx.S: Move to ...
* sysdeps/s390/stpncpy-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/stpncpy.c: Move to ...
* sysdeps/s390/stpncpy.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-stpncpy.h: New file.
The ifunc handling for strncpy is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
Note: The fallback s390-32/s390-64 ifunc variants are now moved to
the strncpy-z900.S files. The s390-32/s390-64 files multiarch/strncpy.c
and strncpy.S are deleted.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove strncpy variants.
* sysdeps/s390/Makefile (sysdep_routines): Add strncpy variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for strncpy.
* sysdeps/s390/multiarch/strncpy-vx.S: Move to ...
* sysdeps/s390/strncpy-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strncpy.c: Move to ...
* sysdeps/s390/strncpy.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-strncpy.h: New file.
* sysdeps/s390/s390-64/strncpy.S: Move to ...
* sysdeps/s390/s390-64/strncpy-z900.S: ... here
and adjust ifunc handling.
* sysdeps/s390/s390-32/strncpy.S: Move to ...
* sysdeps/s390/s390-32/strncpy-z900.S: ... here
and adjust ifunc handling.
* sysdeps/s390/s390-32/multiarch/strncpy.c: Delete file.
* sysdeps/s390/s390-64/multiarch/strncpy.c: Likewise.
The ifunc handling for stpcpy is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove stpcpy variants.
* sysdeps/s390/Makefile (sysdep_routines): Add stpcpy variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for stpcpy.
* sysdeps/s390/multiarch/stpcpy-c.c: Move to ...
* sysdeps/s390/stpcpy-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/stpcpy-vx.S: Move to ...
* sysdeps/s390/stpcpy-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/stpcpy.c: Move to ...
* sysdeps/s390/stpcpy.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-stpcpy.h: New file.
The ifunc handling for strcpy is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
Note: The fallback s390-32/s390-64 ifunc variants with mvst instruction
are now moved to the unified strcpy-z900.S file which can be used for
31/64bit. The s390-32/s390-64 files multiarch/strcpy.c and strcpy.S
are deleted.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove strcpy variants.
* sysdeps/s390/Makefile (sysdep_routines): Add strcpy variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for strcpy.
* sysdeps/s390/multiarch/strcpy-vx.S: Move to ...
* sysdeps/s390/strcpy-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strcpy.c: Move to ...
* sysdeps/s390/strcpy.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-strcpy.h: New file.
* sysdeps/s390/s390-64/strcpy.S: Move to ...
* sysdeps/s390/strcpy-z900.S: ... here and adjust to be usable
for 31/64bit and ifunc handling.
* sysdeps/s390/s390-32/multiarch/strcpy.c: Delete file.
* sysdeps/s390/s390-64/multiarch/strcpy.c: Likewise.
* sysdeps/s390/s390-32/strcpy.S: Likewise.
The ifunc handling for strnlen is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove strnlen variants.
* sysdeps/s390/Makefile (sysdep_routines): Add strnlen variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for strnlen.
* sysdeps/s390/multiarch/strnlen-c.c: Move to ...
* sysdeps/s390/strnlen-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strnlen-vx.S: Move to ...
* sysdeps/s390/strnlen-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strnlen.c: Move to ...
* sysdeps/s390/strnlen.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-strnlen.h: New file.
The ifunc handling for strlen is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove strlen variants.
* sysdeps/s390/Makefile (sysdep_routines): Add strlen variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for strlen.
* sysdeps/s390/multiarch/strlen-c.c: Move to ...
* sysdeps/s390/strlen-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strlen-vx.S: Move to ...
* sysdeps/s390/strlen-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strlen.c: Move to ...
* sysdeps/s390/strlen.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-strlen.h: New file.
The new vector variant of memmem is using the common code
implementation, but instead of calling the default
mem* functions, the vector variants are called.
ChangeLog:
* sysdeps/s390/Makefile (sysdep_routines): Add memmem variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add ifunc variants for memmem.
* sysdeps/s390/ifunc-memmem.h: New file.
* sysdeps/s390/memmem.c: Likewise.
* sysdeps/s390/memmem-c.c: Likewise.
* sysdeps/s390/memmem-vx.c: Likewise.
The new vector variant of strstr is using the common code
implementation, but instead of calling the default
str* / mem* functions, the vector variants are called.
ChangeLog:
* sysdeps/s390/Makefile (sysdep_routines): Add strstr variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add ifunc variants for strstr.
* sysdeps/s390/ifunc-strstr.h: New file.
* sysdeps/s390/strstr.c: Likewise.
* sysdeps/s390/strstr-c.c: Likewise.
* sysdeps/s390/strstr-vx.c: Likewise.
This patch introduces a z13 specific ifunc variant for memmove.
As the common code implementation, it checks if we can copy from
the beginning to the end - with z196 memcpy implementation - or
if we have to copy from the end to the beginning.
The latter case is done by using vector load/store instructions.
If vector instructions are not available, the common-code is
used as fallback. Therefore it is implemented in memmove-c with
a different name.
Furthermore the ifunc logic decides if we need the common-code
implementation at all. If vector instructions are supported
due to the minimum architecture level set we can skip the
common-code ifunc variant.
ChangeLog:
* sysdeps/s390/Makefile (sysdep_routines): Add memmove-c.
* sysdeps/s390/ifunc-memcpy.h (HAVE_MEMMOVE_IFUNC,
HAVE_MEMMOVE_IFUNC_AND_VX_SUPPORT, MEMMOVE_DEFAULT,
HAVE_MEMMOVE_C, MEMMOVE_C, HAVE_MEMMOVE_Z13, MEMMOVE_Z13):
New defines.
* sysdeps/s390/memcpy-z900.S: Add z13 memmove implementation.
* sysdeps/s390/memmove-c.c: New file.
* sysdeps/s390/memmove.c: Likewise.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add ifunc variants for memmove.
Add a configure check for z13 in the same way as done for z196.
ChangeLog:
* config.h.in (HAVE_S390_MIN_Z13_ZARCH_ASM_SUPPORT): New undefine.
* sysdeps/s390/configure.ac: Add check for z13 support.
* sysdeps/s390/configure: Regenerated.
The s390/s390x memcpy implementations are safe to be
used by memmove. Starting with this commit, memmove is
using memcpy for the forward cases on s390.
ChangeLog:
* sysdeps/s390/memcopy.h: New file.
Nowadays gcc is automatically replacing a call to bcopy
with a call to memmove. Thus only old binaries will call
the s390 specific bcopy implementation.
The s390 specific implementation is using an own
implementation for memcpy in the forward case and is
relying on memmove in the backward case.
After removing the s390 specific bcopy, the common code
bcopy is used. It just performs a tail call to memmove.
ChangeLog:
* sysdeps/s390/s390-32/bcopy.S: Remove.
* sysdeps/s390/s390-64/bcopy.S: Likewise.
This patch moves all ifunc variants for memcpy/mempcpy
to sysdeps/s390/memcpy-z900.S. The configure-check/preprocessor logic
in sysdeps/s390/ifunc-memcpy.h decides if ifunc is needed at all
and which ifunc variants should be available.
E.g. if the compiler/assembler already supports z196 by default,
the older ifunc variants are not included.
If we only need the newest ifunc variant,
then we can skip ifunc at all.
Therefore the ifunc-resolvers and __libc_ifunc_impl_list are adjusted
in order to handle only the available ifunc variants.
ChangeLog:
* sysdeps/s390/ifunc-memcpy.h: New File.
* sysdeps/s390/memcpy.S: Move to ...
* sysdeps/s390/memcpy-z900.S ... here.
Move implementations from memcpy-s390x.s to here.
* sysdeps/s390/multiarch/memcpy-s390x.S: Delete File.
* sysdeps/s390/multiarch/Makefile (sysdep_routines):
Remove memcpy/mempcpy variants.
* sysdeps/s390/Makefile (sysdep_routines):
Add memcpy/mempcpy variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Adjust ifunc variants for
memcpy and mempcpy.
* sysdeps/s390/multiarch/memcpy.c: Move ifunc resolver
to ...
* sysdeps/s390/memcpy.c: ... here.
Adjust ifunc variants for memcpy.
* sysdeps/s390/multiarch/mempcpy.c: Move to ...
* sysdeps/s390/mempcpy.c: ... here.
Adjust ifunc variants for mempcpy.
* sysdeps/s390/mempcpy.S: Delete file.
