Support building three variants of 32-bit RISC-V glibc as follows:
- riscv32-linux-gnu-rv32imac-ilp32
- riscv32-linux-gnu-rv32imafdc-ilp32
- riscv32-linux-gnu-rv32imafdc-ilp32d
Reviewed-by: Maciej W. Rozycki <macro@wdc.com>
On s390x, gcc inlines more aggresive compared to other architectures.
This occaisionally leads to build warnings / errors.
Therefore this patch adds a s390x glibc variant with optimization.
There is the ccopts field which contain ABI options which are passed
to configure as CC / CXX. Now there is also the cflags field which
contains non-ABI options like -g or -O. Those are passed to configure
as CFLAGS / CXXFLAGS.
Currently CC is passed to conformtest.py or linknamespace.py but not
the CFLAGS.
Since binutils has obsoleted ia64 support, use --enable-obsolete for
now when configuring binutils for ia64 in build-many-glibcs.py (which
requires adding support for architecture-specific binutils configure
options there). As with other obsoletions, the removal of support for
ia64 in any of (binutils, GCC, Linux kernel) should imply its removal
from glibc.
Tested with build-many-glibcs.py for ia64-linux-gnu (compilers and
glibcs build).
Sun RPC was removed from glibc. This includes rpcgen program, librpcsvc,
and Sun RPC headers. Also test for bug #20790 was removed
(test for rpcgen).
Backward compatibility for old programs is kept only for architectures
and ABIs that have been added in or before version 2.28.
libtirpc is mature enough, librpcsvc and rpcgen are provided in
rpcsvc-proto project.
NOTE: libnsl code depends on Sun RPC (installed libnsl headers use
installed Sun RPC headers), thus --enable-obsolete-rpc was a dependency
for --enable-obsolete-nsl (removed in a previous commit).
The arc ABI list file has to be updated because the port was added
with the sunrpc symbols
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
this means that *always* libnsl is only built as shared library for
backward compatibility and the NSS modules libnss_nis and libnss_nisplus
are not built at all, libnsl's headers aren't installed.
This compatibility is kept only for architectures and ABIs that have
been added in or before version 2.28.
Replacement implementations based on TIRPC, which additionally support
IPv6, are available from <https://github.com/thkukuk/>.
This change does not affect libnss_compat which does not depended
on libnsl since 2.27 and thus can be used without NIS.
libnsl code depends on Sun RPC, e.g. on --enable-obsolete-rpc (installed
libnsl headers use installed Sun RPC headers), which will be removed in
the following commit.
The symbol is deprecated by strerror since its usage imposes some issues
such as copy relocations.
Its internal name is also changed to _sys_errlist_internal to avoid
static linking usage. The compat code is also refactored by removing
the over enginered errlist-compat.c generation from manual entried and
extra comment token in linker script file. It disantangle the code
generation from manual and simplify both Linux and Hurd compat code.
The definitions from errlist.c are moved to errlist.h and a new test
is added to avoid a new errno entry without an associated one in manual.
Checked on x86_64-linux-gnu and i686-linux-gnu. I also run a check-abi
on all affected platforms.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This updates the default GCC version used in build-many-glibcs.py when
no version is specified explicitly. I'm replacing my bot using GCC 8
with one using GCC 10 (leaving the GCC 9 and GCC mainline bots running
as at present).
This patch makes build-many-glibcs.py use the current versions of
Linux (5.6) and GMP (6.2.0).
Tested with build-many-glibcs.py (host-libraries, compilers and glibcs
builds).
The history is not used by build-many-glibcs.py itself.
--replace-sources deletes an existing source tree before switching
the version. But some users prefer to have the full history
available, therefore make shallow clones optional with the --shallow
option.
Now that binutils-gdb has gdbserver at top level, an extra
--disable-gdbserver configure option is needed when configuring
binutils from a git checkout to avoid it also building gdbserver
unnecessarily (although fairly harmlessly). This patch updates the
options used in build-many-glibcs.py accordingly (although this might
end up not being needed depending on what happens regarding whether
gdbserver gets built for host != target).
Tested with a build-many-glibcs.py compilers build for
aarch64-linux-gnu using binutils-gdb master.
This patch updates build-many-glibcs.py for the move of GCC to git,
teaching it to do the initial checkout from git, to replace an SVN
checkout with a git one if --replace-sources is used, and to get the
commit identifier from a git checkout after updating it.
Hurd uses an empty prefix, so the linker scripts end up in /lib, the
find command picked them up, and stripping them failed because they
are not ELF files.
This command uses pre-built compilers to re-install the Linux headers
from the current sources into a temporary location and runs glibc's
“make update-syscalls-lists” against that. This updates the glibc
source tree with the current system call numbers.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The new classes GlibcPolicyForCompiler and GlibcPolicyForBuild allow
customization of the Glibc.build_glibc method, replacing the existing
for_compiler flag.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The patch is straighforward:
- The sparc32 v8 implementations are moved as the generic ones.
- A configure test is added to check for either __sparc_v8__ or
__sparc_v9__.
- The triple names are simplified and sparc implies sparcv8.
The idea is to keep support on sparcv8 architectures that does support
CAS instructions, such as LEON3/LEON4.
Checked on a sparcv9-linux-gnu and sparc64-linux-gnu.
Tested-by: Andreas Larsson <andreas@gaisler.com>
This patch makes build-many-glibcs.py default to binutils 2.33 branch.
Tested with build-many-glibcs.py (compilers and glibcs builds).
* scripts/build-many-glibcs.py (Context.checkout): Default
binutils version to 2.33 branch.
This patch makes build-many-glibcs.py use Linux 5.3.
Tested with build-many-glibcs.py (host-libraries, compilers and glibcs
builds).
* scripts/build-many-glibcs.py (Context.checkout): Default Linux
version to 5.3.
GCC 9 dropped support for the SPE extensions to PowerPC, which means
powerpc*-*-*gnuspe* configurations are no longer buildable with that
compiler. This ISA extension was peculiar to the “e500” line of
embedded PowerPC chips, which, as far as I can tell, are no longer
being manufactured, so I think we should follow suit.
This patch was developed by grepping for “e500”, “__SPE__”, and
“__NO_FPRS__”, and may not eliminate every vestige of SPE support.
Most uses of __NO_FPRS__ are left alone, as they are relevant to
normal embedded PowerPC with soft-float.
* sysdeps/powerpc/preconfigure: Error out on powerpc-*-*gnuspe*
host type.
* scripts/build-many-glibcs.py: Remove powerpc-*-linux-gnuspe
and powerpc-*-linux-gnuspe-e500v1 from list of build configurations.
* sysdeps/powerpc/powerpc32/e500: Recursively delete.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/e500: Recursively delete.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/context-e500.h:
Delete.
* sysdeps/powerpc/fpu_control.h: Remove SPE variant.
Issue an #error if used with a compiler in SPE-float mode.
* sysdeps/powerpc/powerpc32/__longjmp_common.S
* sysdeps/powerpc/powerpc32/setjmp_common.S
* sysdeps/unix/sysv/linux/powerpc/powerpc32/getcontext-common.S
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/getcontext.S
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/setcontext.S
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/swapcontext.S
* sysdeps/unix/sysv/linux/powerpc/powerpc32/setcontext-common.S
* sysdeps/unix/sysv/linux/powerpc/powerpc32/swapcontext-common.S:
Remove code to preserve SPE register state.
* sysdeps/unix/sysv/linux/powerpc/elision-lock.c
* sysdeps/unix/sysv/linux/powerpc/elision-trylock.c
* sysdeps/unix/sysv/linux/powerpc/elision-unlock.c
Remove __SPE__ ifndefs.
This patch makes build-many-glibcs.py use Linux 5.0 in place of 4.20
(now that the test change required to avoid false positives with ulong
in kernel headers has been committed). This includes adjusting the
logic to compute a tarball URL to handle different major version
numbers (rather than changing the path to hardcode v5.x in place of
v4.x, as someone might still wish to check out a v4.x version).
Tested that build-many-glibcs.py successfully checks out Linux 5.0
sources after this patch.
* scripts/build-many-glibcs.py (Context.checkout): Default Linux
version to 5.0.
(Context.checkout_tar): Handle variable major version for Linux
kernel.
These files were both auto-generated and shipped in the source tree.
We can assume that sed is available and always generate the files
during the build.
Now that build-many-glibcs.py touches at checkout time all files that
might get rebuilt in the glibc source directory in a normal glibc
build and test run, this patch stops the script from copying the glibc
source directory, so that all builds use the original directory
directly (and less disk space is used, less I/O is involved and cached
copies of the sources in memory can be shared between all the builds -
as well as avoiding spurious failures from copying while "git gc" is
running). This is similar to how all other components were already
handled. Any bugs involving writing into the source directory can be
dealt with in future as normal bugs, just as such bugs already are
handled.
Tested with build-many-glibcs.py runs with a read-only glibc source
directory, with all files not touched by the script having timestamps
in forwards alphabetical order and separately with all files not
touched by the script having timestamps in backwards alphabetical
order.
* scripts/build-many-glibcs.py (Glibc.build_glibc): Use original
source directory instead of a copy.
(CommandList.create_copy_dir): Remove.
build-many-glibcs.py currently copies the source tree to avoid issues
with parallel builds trying to write into it. This copying can result
in occasional spurious build failures from bots, when a "git gc" is in
progress that changes .git contents while copying is taking place, and
it would also be desirable to avoid the need to copy to save on disk
space, I/O and memory used in build-many-glibcs.py builds.
In preparation for removing the copying, this patch arranges for
build-many-glibcs.py to touch more files on checkout so their
timestamps do not result in make attempting to rebuild them. Before
actually removing the copying, I intend to do further tests to ensure
I haven't missed any other such makefile dependencies.
This is of course without prejudice to possibly moving more of these
files to being generated in the build directory rather than being
checked in at all, where that can be done using build tools already
required for the build. For sysdeps files (installed and otherwise)
it would be necessary to make sure this does not affect the search
ordering, for headers used in the build it would be necessary to
ensure they are generated early enough, and for errlist.c there may be
dual licensing reasons for keeping it checked in.
Tested that a checkout with build-many-glibcs.py does touch the
expected files and that a glibcs build for aarch64-linux-gnu succeeds.
* scripts/build-many-glibcs.py (Context.fix_glibc_timestamps):
Touch additional files.
