I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
This patch adds support huge page support on main arena allocation,
enable with tunable glibc.malloc.hugetlb=2. The patch essentially
disable the __glibc_morecore() sbrk() call (similar when memory
tag does when sbrk() call does not support it) and fallback to
default page size if the memory allocation fails.
Checked on x86_64-linux-gnu.
Reviewed-by: DJ Delorie <dj@redhat.com>
It is enabled as default for glibc.malloc.hugetlb set to 2 or higher.
It also uses a non configurable minimum value and maximum value,
currently set respectively to 1 and 4 selected huge page size.
The arena allocation with huge pages does not use MAP_NORESERVE. As
indicate by kernel internal documentation [1], the flag might trigger
a SIGBUS on soft page faults if at memory access there is no left
pages in the pool.
On systems without a reserved huge pages pool, is just stress the
mmap(MAP_HUGETLB) allocation failure. To improve test coverage it is
required to create a pool with some allocated pages.
Checked on x86_64-linux-gnu with no reserved pages, 10 reserved pages
(which trigger mmap(MAP_HUGETBL) failures) and with 256 reserved pages
(which does not trigger mmap(MAP_HUGETLB) failures).
[1] https://www.kernel.org/doc/html/v4.18/vm/hugetlbfs_reserv.html#resv-map-modifications
Reviewed-by: DJ Delorie <dj@redhat.com>
With the morecore hook removed, there is not easy way to provide huge
pages support on with glibc allocator without resorting to transparent
huge pages. And some users and programs do prefer to use the huge pages
directly instead of THP for multiple reasons: no splitting, re-merging
by the VM, no TLB shootdowns for running processes, fast allocation
from the reserve pool, no competition with the rest of the processes
unlike THP, no swapping all, etc.
This patch extends the 'glibc.malloc.hugetlb' tunable: the value
'2' means to use huge pages directly with the system default size,
while a positive value means and specific page size that is matched
against the supported ones by the system.
Currently only memory allocated on sysmalloc() is handled, the arenas
still uses the default system page size.
To test is a new rule is added tests-malloc-hugetlb2, which run the
addes tests with the required GLIBC_TUNABLE setting. On systems without
a reserved huge pages pool, is just stress the mmap(MAP_HUGETLB)
allocation failure. To improve test coverage it is required to create
a pool with some allocated pages.
Checked on x86_64-linux-gnu.
Reviewed-by: DJ Delorie <dj@redhat.com>
Linux Transparent Huge Pages (THP) current supports three different
states: 'never', 'madvise', and 'always'. The 'never' is
self-explanatory and 'always' will enable THP for all anonymous
pages. However, 'madvise' is still the default for some system and
for such case THP will be only used if the memory range is explicity
advertise by the program through a madvise(MADV_HUGEPAGE) call.
To enable it a new tunable is provided, 'glibc.malloc.hugetlb',
where setting to a value diffent than 0 enables the madvise call.
This patch issues the madvise(MADV_HUGEPAGE) call after a successful
mmap() call at sysmalloc() with sizes larger than the default huge
page size. The madvise() call is disable is system does not support
THP or if it has the mode set to "never" and on Linux only support
one page size for THP, even if the architecture supports multiple
sizes.
To test is a new rule is added tests-malloc-hugetlb1, which run the
addes tests with the required GLIBC_TUNABLE setting.
Checked on x86_64-linux-gnu.
Reviewed-by: DJ Delorie <dj@redhat.com>
This is an internal function meant to return the number of avaliable
processor where the process can scheduled, different than the
__get_nprocs which returns a the system available online CPU.
The Linux implementation currently only calls __get_nprocs(), which
in tuns calls sched_getaffinity.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
We stopped adding "Contributed by" or similar lines in sources in 2012
in favour of git logs and keeping the Contributors section of the
glibc manual up to date. Removing these lines makes the license
header a bit more consistent across files and also removes the
possibility of error in attribution when license blocks or files are
copied across since the contributed-by lines don't actually reflect
reality in those cases.
Move all "Contributed by" and similar lines (Written by, Test by,
etc.) into a new file CONTRIBUTED-BY to retain record of these
contributions. These contributors are also mentioned in
manual/contrib.texi, so we just maintain this additional record as a
courtesy to the earlier developers.
The following scripts were used to filter a list of files to edit in
place and to clean up the CONTRIBUTED-BY file respectively. These
were not added to the glibc sources because they're not expected to be
of any use in future given that this is a one time task:
https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dchttps://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Remove unused code and declare __libc_mallopt when !IS_IN (libc) to
allow the debug hook to build with --disable-tunables.
Also, run tst-ifunc-isa-2* tests only when tunables are enabled since
the result depends on it.
Tested on x86_64.
Reported-by: Matheus Castanho <msc@linux.ibm.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The malloc-check debugging feature is tightly integrated into glibc
malloc, so thanks to an idea from Florian Weimer, much of the malloc
implementation has been moved into libc_malloc_debug.so to support
malloc-check. Due to this, glibc malloc and malloc-check can no
longer work together; they use altogether different (but identical)
structures for heap management. This should not make a difference
though since the malloc check hook is not disabled anywhere.
malloc_set_state does, but it does so early enough that it shouldn't
cause any problems.
The malloc check tunable is now in the debug DSO and has no effect
when the DSO is not preloaded.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Now that mcheck no longer needs to check __malloc_initialized (and no
other third party hook can since the symbol is not exported), make the
variable boolean and static so that it is used strictly within malloc.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Remove all malloc hook uses from core malloc functions and move it
into a new library libc_malloc_debug.so. With this, the hooks now no
longer have any effect on the core library.
libc_malloc_debug.so is a malloc interposer that needs to be preloaded
to get hooks functionality back so that the debugging features that
depend on the hooks, i.e. malloc-check, mcheck and mtrace work again.
Without the preloaded DSO these debugging features will be nops.
These features will be ported away from hooks in subsequent patches.
Similarly, legacy applications that need hooks functionality need to
preload libc_malloc_debug.so.
The symbols exported by libc_malloc_debug.so are maintained at exactly
the same version as libc.so.
Finally, static binaries will no longer be able to use malloc
debugging features since they cannot preload the debugging DSO.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Make the __morecore and __default_morecore symbols compat-only and
remove their declarations from the API. Also, include morecore.c
directly into malloc.c; this should ideally get merged into malloc in
a future cleanup.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The tcache allocator layer uses the tcache pointer as a key to
identify a block that may be freed twice. Since this is in the
application data area, an attacker exploiting a use-after-free could
potentially get access to the entire tcache structure through this
key. A detailed write-up was provided by Awarau here:
https://awaraucom.wordpress.com/2020/07/19/house-of-io-remastered/
Replace this static pointer use for key checking with one that is
generated at malloc initialization. The first attempt is through
getrandom with a fallback to random_bits(), which is a simple
pseudo-random number generator based on the clock. The fallback ought
to be sufficient since the goal of the randomness is only to make the
key arbitrary enough that it is very unlikely to collide with user
data.
Co-authored-by: Eyal Itkin <eyalit@checkpoint.com>
The branches may be better optimized since mtag_enabled is widely used.
Granule size larger than a chunk header is not supported since then we
cannot have both the chunk header and user area granule aligned. To
fix that for targets with large granule, the chunk layout has to change.
So code that attempted to handle the granule mask generally was changed.
This simplified CHUNK_AVAILABLE_SIZE and the logic in malloc_usable_size.
Reviewed-by: DJ Delorie <dj@redhat.com>
A flag check can be faster than function pointers because of how
branch prediction and speculation works and it can also remove a layer
of indirection when there is a mismatch between the malloc internal
tag_* api and __libc_mtag_* target hooks.
Memory tagging wrapper functions are moved to malloc.c from arena.c and
the logic now checks mmap_enabled. The definition of tag_new_usable is
moved after chunk related definitions.
This refactoring also allows using mtag_enabled checks instead of
USE_MTAG ifdefs when memory tagging support only changes code logic
when memory tagging is enabled at runtime. Note: an "if (false)" code
block is optimized away even at -O0 by gcc.
Reviewed-by: DJ Delorie <dj@redhat.com>
This does not change behaviour, just removes one layer of indirection
in the internal memory tagging logic.
Use tag_ and mtag_ prefixes instead of __tag_ and __mtag_ since these
are all symbols with internal linkage, private to malloc.c, so there
is no user namespace pollution issue.
Reviewed-by: DJ Delorie <dj@redhat.com>
The chunk cannot be a dumped one here. The only non-obvious cases
are free and realloc which may be called on a dumped area chunk,
but in both cases it can be verified that tagging is already
avoided for dumped area chunks.
Reviewed-by: DJ Delorie <dj@redhat.com>
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
This patch adds the basic support for memory tagging.
Various flavours are supported, particularly being able to turn on
tagged memory at run-time: this allows the same code to be used on
systems where memory tagging support is not present without neededing
a separate build of glibc. Also, depending on whether the kernel
supports it, the code will use mmap for the default arena if morecore
does not, or cannot support tagged memory (on AArch64 it is not
available).
All the hooks use function pointers to allow this to work without
needing ifuncs.
Reviewed-by: DJ Delorie <dj@redhat.com>
The secondary/non-primary/inner libc (loaded via dlmopen, LD_AUDIT,
static dlopen) must not use sbrk to allocate member because that would
interfere with allocations in the outer libc. On Linux, this does not
matter because sbrk itself was changed to fail in secondary libcs.
_dl_addr occasionally shows up in profiles, but had to be used before
because __libc_multiple_libs was unreliable. So this change achieves
a slight reduction in startup time.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
malloc debug: fix compile error when enable macro MALLOC_DEBUG > 1.
this is because commit e9c4fe93b3 has change the struct malloc_chunk's member "size" to "mchunk_size".
the reproduction is like that:
setp1: modify related Makefile.
vim ../glibc/malloc/Makefile
CPPFLAGS-malloc.o += -DMALLOC_DEBUG=2
step2: ../configure --prefix=/usr
make -j32
this will cause the compile error:
/home/liqingqing/glibc_upstream/buildglibc/malloc/malloc.o
In file included from malloc.c:1899:0:
arena.c: In function 'dump_heap':
arena.c:422:58: error: 'struct malloc_chunk' has no member named 'size'
fprintf (stderr, "chunk %p size %10lx", p, (long) p->size);
^~
arena.c:428:17: error: 'struct malloc_chunk' has no member named 'size'
else if (p->size == (0 | PREV_INUSE))
Reviewed-by: DJ Delorie <dj@redhat.com>
Remove do_set_mallopt_check prototype since it is unused.
* malloc/arena.c (do_set_mallopt_check): Removed.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: DJ Delorie <dj@redhat.com>
This commit is in preparation of turning the macro into a proper
function. The output arguments of the macro were in fact unused.
Also clean up uses of __builtin_expect.
It does not make sense to register separate cleanup functions for arena
and tcache since they're always going to be called together. Call the
tcache cleanup function from within arena_thread_freeres since it at
least makes the order of those cleanups clear in the code.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The current malloc initialization is quite convoluted. Instead of
sometimes calling malloc_consolidate from ptmalloc_init, call
malloc_init_state early so that the main_arena is always initialized.
The special initialization can now be removed from malloc_consolidate.
This also fixes BZ #22159.
Check all calls to malloc_consolidate and remove calls that are
redundant initialization after ptmalloc_init, like in int_mallinfo
and __libc_mallopt (but keep the latter as consolidation is required for
set_max_fast). Update comments to improve clarity.
Remove impossible initialization check from _int_malloc, fix assert
in do_check_malloc_state to ensure arena->top != 0. Fix the obvious bugs
in do_check_free_chunk and do_check_remalloced_chunk to enable single
threaded malloc debugging (do_check_malloc_state is not thread safe!).
[BZ #22159]
* malloc/arena.c (ptmalloc_init): Call malloc_init_state.
* malloc/malloc.c (do_check_free_chunk): Fix build bug.
(do_check_remalloced_chunk): Fix build bug.
(do_check_malloc_state): Add assert that checks arena->top.
(malloc_consolidate): Remove initialization.
(int_mallinfo): Remove call to malloc_consolidate.
(__libc_mallopt): Clarify why malloc_consolidate is needed.
Clean up calls to malloc_printerr and trim its argument list.
This also removes a few bits of work done before calling
malloc_printerr (such as unlocking operations).
The tunable/environment variable still enables the lightweight
additional malloc checking, but mallopt (M_CHECK_ACTION)
no longer has any effect.
The TUNABLE_SET_VALUE and family of macros (and my later attempt to
add a TUNABLE_GET) never quite went together very well because the
overall interface was not clearly defined. This patch is an attempt
to do just that.
This patch consolidates the API to two simple sets of macros,
TUNABLE_GET* and TUNABLE_SET*. If TUNABLE_NAMESPACE is defined,
TUNABLE_GET takes just the tunable name, type and a (optionally NULL)
callback function to get the value of the tunable. The callback
function, if non-NULL, is called if the tunable was externally set
(i.e. via GLIBC_TUNABLES or any future mechanism). For example:
val = TUNABLE_GET (check, int32_t, check_callback)
returns the value of the glibc.malloc.check tunable (assuming
TUNABLE_NAMESPACE is set to malloc) as an int32_t into VAL after
calling check_callback.
Likewise, TUNABLE_SET can be used to set the value of the tunable,
although this is currently possible only in the dynamic linker before
it relocates itself. For example:
TUNABLE_SET (check, int32_t, 2)
will set glibc.malloc.check to 2. Of course, this is not possible
since we set (or read) glibc.malloc.check long after it is relocated.
To access or set a tunable outside of TUNABLE_NAMESPACE, use the
TUNABLE_GET_FULL and TUNABLE_SET_FULL macros, which have the following
prototype:
TUNABLE_GET_FULL (glibc, tune, hwcap_mask, uint64_t, NULL)
TUNABLE_SET_FULL (glibc, tune, hwcap_mask, uint64_t, 0xffff)
In future the tunable list may get split into mutable and immutable
tunables where mutable tunables can be modified by the library and
userspace after relocation as well and TUNABLE_SET will be more useful
than it currently is. However whenever we actually do that split, we
will have to ensure that the mutable tunables are protected with
locks.
* elf/Versions (__tunable_set_val): Rename to __tunable_get_val.
* elf/dl-tunables.c: Likewise.
(do_tunable_update_val): New function.
(__tunable_set_val): New function.
(__tunable_get_val): Call CB only if the tunable was externally
initialized.
(tunables_strtoul): Replace strval with initialized.
* elf/dl-tunables.h (strval): Replace with a bool initialized.
(TUNABLE_ENUM_NAME, TUNABLE_ENUM_NAME1): Adjust names to
prevent collision.
(__tunable_set_val): New function.
(TUNABLE_GET, TUNABLE_GET_FULL): New macros.
(TUNABLE_SET, TUNABLE_SET_FULL): Likewise.
(TUNABLE_SET_VAL): Remove.
(TUNABLE_SET_VAL_WITH_CALLBACK): Likewise.
* README.tunables: Document the new macros.
* malloc/arena.c (ptmalloc_init): Adjust.
The code to set value passed a tunable_val_t, which when cast to
int32_t on big-endian gives the wrong value. Instead, use
tunable_val_t.numval instead, which can then be safely cast into
int32_t.
The tunables framework allows us to uniformly manage and expose global
variables inside glibc as switches to users. tunables/README has
instructions for glibc developers to add new tunables.
Tunables support can be enabled by passing the --enable-tunables
configure flag to the configure script. This patch only adds a
framework and does not pose any limitations on how tunable values are
read from the user. It also adds environment variables used in malloc
behaviour tweaking to the tunables framework as a PoC of the
compatibility interface.
* manual/install.texi: Add --enable-tunables option.
* INSTALL: Regenerate.
* README.tunables: New file.
* Makeconfig (CPPFLAGS): Define TOP_NAMESPACE.
(before-compile): Generate dl-tunable-list.h early.
* config.h.in: Add HAVE_TUNABLES.
* config.make.in: Add have-tunables.
* configure.ac: Add --enable-tunables option.
* configure: Regenerate.
* csu/init-first.c (__libc_init_first): Move
__libc_init_secure earlier...
* csu/init-first.c (LIBC_START_MAIN):... to here.
Include dl-tunables.h, libc-internal.h.
(LIBC_START_MAIN) [!SHARED]: Initialize tunables for static
binaries.
* elf/Makefile (dl-routines): Add dl-tunables.
* elf/Versions (ld): Add __tunable_set_val to GLIBC_PRIVATE
namespace.
* elf/dl-support (_dl_nondynamic_init): Unset MALLOC_CHECK_
only when !HAVE_TUNABLES.
* elf/rtld.c (process_envvars): Likewise.
* elf/dl-sysdep.c [HAVE_TUNABLES]: Include dl-tunables.h
(_dl_sysdep_start): Call __tunables_init.
* elf/dl-tunable-types.h: New file.
* elf/dl-tunables.c: New file.
* elf/dl-tunables.h: New file.
* elf/dl-tunables.list: New file.
* malloc/tst-malloc-usable-static.c: New test case.
* malloc/Makefile (tests-static): Add it.
* malloc/arena.c [HAVE_TUNABLES]: Include dl-tunables.h.
Define TUNABLE_NAMESPACE.
(DL_TUNABLE_CALLBACK (set_mallopt_check)): New function.
(DL_TUNABLE_CALLBACK_FNDECL): New macro. Use it to define
callback functions.
(ptmalloc_init): Set tunable values.
* scripts/gen-tunables.awk: New file.
* sysdeps/mach/hurd/dl-sysdep.c: Include dl-tunables.h.
(_dl_sysdep_start): Call __tunables_init.
It is necessary to preserve the invariant that if an arena is
on the free list, it has thread attach count zero. Otherwise,
when arena_thread_freeres sees the zero attach count, it will
add it, and without the invariant, an arena could get pushed
to the list twice, resulting in a cycle.
One possible execution trace looks like this:
Thread 1 examines free list and observes it as empty.
Thread 2 exits and adds its arena to the free list,
with attached_threads == 0).
Thread 1 selects this arena in reused_arena (not from the free list).
Thread 1 increments attached_threads and attaches itself.
(The arena remains on the free list.)
Thread 1 exits, decrements attached_threads,
and adds the arena to the free list.
The final step creates a cycle in the usual way (by overwriting the
next_free member with the former list head, while there is another
list item pointing to the arena structure).
tst-malloc-thread-exit exhibits this issue, but it was only visible
with a debugger because the incorrect fix in bug 19243 removed
the assert from get_free_list.
Before this change, the while loop in reused_arena which avoids
returning a corrupt arena would never execute its body if the selected
arena were not corrupt. As a result, result == begin after the loop,
and the function returns NULL, triggering fallback to mmap.
__malloc_initialize_hook is interposed by application code, so
the usual approach to define a compatibility symbol does not work.
This commit adds a new mechanism based on #pragma GCC poison in
<stdc-predef.h>.
The fork handler now runs so late that there is no risk anymore that
other fork handlers in the same thread use malloc, so it is no
longer necessary to install malloc hooks which made a subset
of malloc functionality available to the thread that called fork.
Previously, a thread M invoking fork would acquire locks in this order:
(M1) malloc arena locks (in the registered fork handler)
(M2) libio list lock
A thread F invoking flush (NULL) would acquire locks in this order:
(F1) libio list lock
(F2) individual _IO_FILE locks
A thread G running getdelim would use this order:
(G1) _IO_FILE lock
(G2) malloc arena lock
After executing (M1), (F1), (G1), none of the threads can make progress.
This commit changes the fork lock order to:
(M'1) libio list lock
(M'2) malloc arena locks
It explicitly encodes the lock order in the implementations of fork,
and does not rely on the registration order, thus avoiding the deadlock.
