I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
DELOUSE was added to asm code to make them compatible with non-LP64
ABIs, but it is an unfortunate name and the code was not compatible
with ABIs where pointer and size_t are different. Glibc currently
only supports the LP64 ABI so these macros are not really needed or
tested, but for now the name is changed to be more meaningful instead
of removing them completely.
Some DELOUSE macros were dropped: clone, strlen and strnlen used it
unnecessarily.
The out of tree ILP32 patches are currently not maintained and will
likely need a rework to rebase them on top of the time64 changes.
On aarch64, alpha, arm, hppa, mips, nios2, powerpc, sh, sparc, tile,
and x86_64 the clone syscall jumps to _exit after the child execution
and the function ends the process execution by calling exit_group.
This behavior have a small issue where threads created with
CLONE_THREAD using clone syscall directly will eventually exit the
whole group altogether instead of just the thread created. Also,
s390, microblaze, ia64, i386, and m68k differs by calling exit
syscall directly.
This patch changes all architectures to call the exit syscall
directly, as for s390, microblaze, ia64, i386, and m68k. This do not
have change glibc internal behavior in any sort, since the only
usage of clone implementation in posix_spawn calls _exit directly
in the created child (fork uses a direct call to clone).
Checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu,
powerpc-linux-gnu, powerpc64le-linux-gnu, sparc64-linux-gnu,
and sparcv9-linux-gnu.
[BZ #21512]
* sysdeps/unix/sysv/linux/aarch64/clone.S (__clone): Call exit
syscall instead of jump to _exit.
(CLONE_VM_BIT): Remove unused define.
(CLONE_VM): Likewise.
(CLONE_THREAD_BIT): Likewise.
(CLONE_THREAD): Likewise.
* sysdeps/unix/sysv/linux/alpha/clone.S (__clone): Likewise.
(CLONE_VM): Remove unused define.
* sysdeps/unix/sysv/linux/arm/clone.S (__clone): Likewise.
(CLONE_VM): Remove unused define.
(CLONE_THREAD): Likewise.
* sysdeps/unix/sysv/linux/i386/clone.S (CLONE_VM): Likewise.
* sysdeps/unix/sysv/linux/ia64/clone2.S (__clone2): Call exit
syscall instead of jump to _exit.
* sysdeps/unix/sysv/linux/hppa/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/mips/clone.S (__clone): Likewise.
(CLONE_VM): Remove unused define.
(CLONE_THREAD): Likewise.
* sysdeps/unix/sysv/linux/nios2/clone.S (__clone): Likewise.
(CLONE_VM): Remove unused define.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S (__clone):
Likewise.
(CLONE_VM): Remove unused define.
(CLONE_THREAD): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S (__clone):
Likewise.
(CLONE_VM): Remove unused define.
(CLONE_THREAD): Likewise.
* sysdeps/unix/sysv/linux/sh/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/clone.S (__clone): Likewise.
(CLONE_VM): Remove unused define.
* sysdeps/unix/sysv/linux/sparc/sparc64/clone.S (__clone): Likewise.
(CLONE_VM): Remove unused define.
* sysdeps/unix/sysv/linux/tile/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/x86_64/clone.S (__clone): Likewise.
(CLONE_VM): Remove unused define.
* sysdeps/unix/sysv/linux/Makefile (tests): Add tst-clone3.
* sysdeps/unix/sysv/linux/tst-clone3.c: New file.
Fix
This patch remove the PID cache and usage in current GLIBC code. Current
usage is mainly used a performance optimization to avoid the syscall,
however it adds some issues:
- The exposed clone syscall will try to set pid/tid to make the new
thread somewhat compatible with current GLIBC assumptions. This cause
a set of issue with new workloads and usecases (such as BZ#17214 and
[1]) as well for new internal usage of clone to optimize other algorithms
(such as clone plus CLONE_VM for posix_spawn, BZ#19957).
- The caching complexity also added some bugs in the past [2] [3] and
requires more effort of each port to handle such requirements (for
both clone and vfork implementation).
- Caching performance gain in mainly on getpid and some specific
code paths. The getpid performance leverage is questionable [4],
either by the idea of getpid being a hotspot as for the getpid
implementation itself (if it is indeed a justifiable hotspot a
vDSO symbol could let to a much more simpler solution).
Other usage is mainly for non usual code paths, such as pthread
cancellation signal and handling.
For thread creation (on stack allocation) the code simplification in fact
adds some performance gain due the no need of transverse the stack cache
and invalidate each element pid.
Other thread usages will require a direct getpid syscall, such as
cancellation/setxid signal, thread cancellation, thread fail path (at
create_thread), and thread signal (pthread_kill and pthread_sigqueue).
However these are hardly usual hotspots and I think adding a syscall is
justifiable.
It also simplifies both the clone and vfork arch-specific implementation.
And by review each fork implementation there are some discrepancies that
this patch also solves:
- microblaze clone/vfork does not set/reset the pid/tid field
- hppa uses the default vfork implementation that fallback to fork.
Since vfork is deprecated I do not think we should bother with it.
The patch also removes the TID caching in clone. My understanding for
such semantic is try provide some pthread usage after a user program
issue clone directly (as done by thread creation with CLONE_PARENT_SETTID
and pthread tid member). However, as stated before in multiple discussions
threads, GLIBC provides clone syscalls without further supporting all this
semantics.
I ran a full make check on x86_64, x32, i686, armhf, aarch64, and powerpc64le.
For sparc32, sparc64, and mips I ran the basic fork and vfork tests from
posix/ folder (on a qemu system). So it would require further testing
on alpha, hppa, ia64, m68k, nios2, s390, sh, and tile (I excluded microblaze
because it is already implementing the patch semantic regarding clone/vfork).
[1] https://codereview.chromium.org/800183004/
[2] https://sourceware.org/ml/libc-alpha/2006-07/msg00123.html
[3] https://sourceware.org/bugzilla/show_bug.cgi?id=15368
[4] http://yarchive.net/comp/linux/getpid_caching.html
* sysdeps/nptl/fork.c (__libc_fork): Remove pid cache setting.
* nptl/allocatestack.c (allocate_stack): Likewise.
(__reclaim_stacks): Likewise.
(setxid_signal_thread): Obtain pid through syscall.
* nptl/nptl-init.c (sigcancel_handler): Likewise.
(sighandle_setxid): Likewise.
* nptl/pthread_cancel.c (pthread_cancel): Likewise.
* sysdeps/unix/sysv/linux/pthread_kill.c (__pthread_kill): Likewise.
* sysdeps/unix/sysv/linux/pthread_sigqueue.c (pthread_sigqueue):
Likewise.
* sysdeps/unix/sysv/linux/createthread.c (create_thread): Likewise.
* sysdeps/unix/sysv/linux/getpid.c: Remove file.
* nptl/descr.h (struct pthread): Change comment about pid value.
* nptl/pthread_getattr_np.c (pthread_getattr_np): Remove thread
pid assert.
* sysdeps/unix/sysv/linux/pthread-pids.h (__pthread_initialize_pids):
Do not set pid value.
* nptl_db/td_ta_thr_iter.c (iterate_thread_list): Remove thread
pid cache check.
* nptl_db/td_thr_validate.c (td_thr_validate): Likewise.
* sysdeps/aarch64/nptl/tcb-offsets.sym: Remove pid offset.
* sysdeps/alpha/nptl/tcb-offsets.sym: Likewise.
* sysdeps/arm/nptl/tcb-offsets.sym: Likewise.
* sysdeps/hppa/nptl/tcb-offsets.sym: Likewise.
* sysdeps/i386/nptl/tcb-offsets.sym: Likewise.
* sysdeps/ia64/nptl/tcb-offsets.sym: Likewise.
* sysdeps/m68k/nptl/tcb-offsets.sym: Likewise.
* sysdeps/microblaze/nptl/tcb-offsets.sym: Likewise.
* sysdeps/mips/nptl/tcb-offsets.sym: Likewise.
* sysdeps/nios2/nptl/tcb-offsets.sym: Likewise.
* sysdeps/powerpc/nptl/tcb-offsets.sym: Likewise.
* sysdeps/s390/nptl/tcb-offsets.sym: Likewise.
* sysdeps/sh/nptl/tcb-offsets.sym: Likewise.
* sysdeps/sparc/nptl/tcb-offsets.sym: Likewise.
* sysdeps/tile/nptl/tcb-offsets.sym: Likewise.
* sysdeps/x86_64/nptl/tcb-offsets.sym: Likewise.
* sysdeps/unix/sysv/linux/aarch64/clone.S: Remove pid and tid caching.
* sysdeps/unix/sysv/linux/alpha/clone.S: Likewise.
* sysdeps/unix/sysv/linux/arm/clone.S: Likewise.
* sysdeps/unix/sysv/linux/hppa/clone.S: Likewise.
* sysdeps/unix/sysv/linux/i386/clone.S: Likewise.
* sysdeps/unix/sysv/linux/ia64/clone2.S: Likewise.
* sysdeps/unix/sysv/linux/mips/clone.S: Likewise.
* sysdeps/unix/sysv/linux/nios2/clone.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/clone.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/sh/clone.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/clone.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/tile/clone.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/aarch64/vfork.S: Remove pid set and reset.
* sysdeps/unix/sysv/linux/alpha/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/arm/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/i386/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/ia64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/m68k/clone.S: Likewise.
* sysdeps/unix/sysv/linux/m68k/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/mips/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/nios2/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/sh/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/tile/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/tst-clone2.c (f): Remove direct pthread
struct access.
(clone_test): Remove function.
(do_test): Rewrite to take in consideration pid is not cached anymore.
As discussed in libc-alpha [1] current clone with CLONE_VM (without
CLONE_THREAD set) will reset the pthread pid/tid fields to -1. The
issue is since memory is shared between the parent and child it will
clobber parent's cached pid/tid leading to internal inconsistencies
if the value is not restored.
And even it is restored it may lead to racy conditions when between
set/restore a thread might invoke pthread function that validate the
pthread with INVALID_TD_P/INVALID_NOT_TERMINATED_TD_P and thus get
wrong results.
As stated in BZ19957, previously reports of this behaviour was close
with EWONTFIX due the fact usage of clone outside glibc is tricky
since glibc requires consistent internal pthread, while using clone
directly may not provide it. However since now posix_spawn uses
clone (CLONE_VM) to fixes various issues related to previous vfork
usage this issue requires fixing.
The vfork implementation also does something similar, but instead
it negates and restores only the *pid* field and functions that
might access its value know to handle such case (getpid, raise
and pthread ones that uses INVALID_TD_P/INVALID_NOT_TERMINATED_TD_P
macros that check only *tid* field). Also vfork does not call
__clone directly, instead calling either __NR_vfork or __NR_clone
directly.
So this patch removes this clone behavior by avoiding setting
the pthread pid/tid field for CLONE_VM. There is no need to
check for CLONE_THREAD, since the minimum supported kernel in all
architecture implies that CLONE_VM must be used with CLONE_THREAD,
otherwise clone returns EINVAL.
Instead of current approach of:
int clone(int (*fn)(void *), void *child_stack, int flags, ...)
[...]
if (flags & CLONE_THREAD)
goto do_syscall;
pid_t new_value;
if (flags & CLONE_VM)
new_value = -1;
else
new_value = getpid ();
THREAD_SETMEM (THREAD_SELF, pid, new_value);
THREAD_SETMEM (THREAD_SELF, tid, new_value);
do_syscall:
[...]
The new approach uses:
int clone(int (*fn)(void *), void *child_stack, int flags, ...)
[...]
if (flags & CLONE_VM)
goto do_syscall;
pid_t new_value = getpid ();
THREAD_SETMEM (THREAD_SELF, pid, new_value);
THREAD_SETMEM (THREAD_SELF, tid, new_value);
do_syscall:
[...]
It also removes the linux tst-getpid2.c test which expects the previous
behavior and instead add another clone test.
Tested on x86_64, i686, x32, powerpc64le, aarch64, armhf, s390, and
s390x. I also did limited check on mips32 and sparc64 (using the new
added test).
I also got reviews from both m68k, hppa, and tile. So I presume for
these architecture the patch works.
The fixes for alpha, microblaze, sh, ia64, and nio2 have not been
tested.
[1] https://sourceware.org/ml/libc-alpha/2016-04/msg00307.html
* sysdeps/unix/sysv/linux/Makefile [$(subdir) == nptl] (test): Remove
tst-getpid2.
(test): Add tst-clone2.
* sysdeps/unix/sysv/linux/tst-clone2.c: New file.
* sysdeps/unix/sysv/linux/aarch64/clone.S (__clone): Do not change
pid/tid fields for CLONE_VM.
* sysdeps/unix/sysv/linux/arm/clone.S: Likewise.
* sysdeps/unix/sysv/linux/i386/clone.S: Likewise.
* sysdeps/unix/sysv/linux/mips/clone.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/clone.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/clone.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/tst-getpid2.c: Remove file.
This patch implements a new posix_spawn{p} implementation for Linux. The main
difference is it uses the clone syscall directly with CLONE_VM and CLONE_VFORK
flags and a direct allocated stack. The new stack and start function solves
most the vfork limitation (possible parent clobber due stack spilling). The
remaning issue are related to signal handling:
1. That no signal handlers must run in child context, to avoid corrupt
parent's state.
2. Child must synchronize with parent to enforce stack deallocation and
to possible return execv issues.
The first one is solved by blocking all signals in child, even NPTL-internal
ones (SIGCANCEL and SIGSETXID). The second issue is done by a stack allocation
in parent and a synchronization with using a pipe or waitpid (in case or error).
The pipe has the advantage of allowing the child signal an exec error (checked
with new tst-spawn2 test).
There is an inherent race condition in pipe2 usage for architectures that do not
support the syscall directly. In such cases the a pipe plus fctnl is used
instead and it may lead to file descriptor leak in parent (as decribed by fcntl
documentation).
The child process stack is allocate with a mmap with MAP_STACK flag using
default architecture stack size. Although it is slower than use a stack buffer
from parent, it allows some slack for the compatibility code to run scripts
with no shebang (which may use a buffer with size depending of argument list
count).
Performance should be similar to the vfork default posix implementation and
way faster than fork path (vfork on mostly linux ports are basically
clone with CLONE_VM plus CLONE_VFORK). The only difference is the syscalls
required for the stack allocation/deallocation.
It fixes BZ#10354, BZ#14750, and BZ#18433.
Tested on i386, x86_64, powerpc64le, and aarch64.
[BZ #14750]
[BZ #10354]
[BZ #18433]
* include/sched.h (__clone): Add hidden prototype.
(__clone2): Likewise.
* include/unistd.h (__dup): Likewise.
* posix/Makefile (tests): Add tst-spawn2.
* posix/tst-spawn2.c: New file.
* sysdeps/posix/dup.c (__dup): Add hidden definition.
* sysdeps/unix/sysv/linux/aarch64/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/alpha/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/arm/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/hppa/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/i386/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/ia64/clone2.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/m68k/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/microblaze/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/mips/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/nios2/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S (__clone):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S (__clone):
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/sh/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/tile/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/x86_64/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/nptl-signals.h
(____nptl_is_internal_signal): New function.
* sysdeps/unix/sysv/linux/spawni.c: New file.
This patch moves the AArch64 port to the main sysdeps hierarchy. The
move is essentially:
git mv ports/sysdeps/aarch64 sysdeps/aarch64
git mv ports/sysdeps/unix/sysv/linux/aarch64 sysdeps/unix/sysv/linux/aarch64
The README is updated and I've updated ChangeLog.aarch64 along the
lines of the ARM move. The AArch64 build has been tested to confirm
that there were no changes in objdump -dr output or the shared
objects.
