Information about whether the ABI of long double is the same as that
of double is split between bits/mathdef.h and bits/wordsize.h.
When the ABIs are the same, bits/mathdef.h defines
__NO_LONG_DOUBLE_MATH. In addition, in the case where the same glibc
binary supports both -mlong-double-64 and -mlong-double-128,
bits/wordsize.h defines __LONG_DOUBLE_MATH_OPTIONAL, along with
__NO_LONG_DOUBLE_MATH if this particular compilation is with
-mlong-double-64.
As part of the refactoring I proposed in
<https://sourceware.org/ml/libc-alpha/2016-11/msg00745.html>, this
patch puts all that information in a single header,
bits/long-double.h. It is included from sys/cdefs.h alongside the
include of bits/wordsize.h, so other headers generally do not need to
include bits/long-double.h directly.
Previously, various bits/mathdef.h headers and bits/wordsize.h headers
had this long double information (including implicitly in some
bits/mathdef.h headers through not having the defines present in the
default version). After the patch, it's all in six bits/long-double.h
headers. Furthermore, most of those new headers are not
architecture-specific. Architectures with optional long double all
use the ldbl-opt sysdeps directory, either in the order (ldbl-64-128,
ldbl-opt, ldbl-128) or (ldbl-128ibm, ldbl-opt). Thus a generic header
for the case where long double = double, and headers in ldbl-128,
ldbl-96 and ldbl-opt, suffices to cover every architecture except for
cases where long double properties vary between different ABIs sharing
a set of installed headers; fortunately all the ldbl-opt cases share a
single compiler-predefined macro __LONG_DOUBLE_128__ that can be used
to tell whether this compilation is -mlong-double-64 or
-mlong-double-128.
The two cases where a set of headers is shared between ABIs with
different long double properties, MIPS (o32 has long double = double,
other ABIs use ldbl-128) and SPARC (32-bit has optional long double,
64-bit has required long double), need their own bits/long-double.h
headers.
As with bits/wordsize.h, multiple-include protection for this header
is generally implicit through the include guards on sys/cdefs.h, and
multiple inclusion is harmless in any case. There is one subtlety:
the header must not define __LONG_DOUBLE_MATH_OPTIONAL if
__NO_LONG_DOUBLE_MATH was defined before its inclusion, because doing
so breaks how sysdeps/ieee754/ldbl-opt/nldbl-compat.h defines
__NO_LONG_DOUBLE_MATH itself before including system headers. Subject
to keeping that working, it would be reasonable to move these macros
from defined/undefined #ifdef to always-defined 1/0 #if semantics, but
this patch does not attempt to do so, just rearranges where the macros
are defined.
After this patch, the only use of bits/mathdef.h is the alpha one for
modifying complex function ABIs for old GCC. Thus, all versions of
the header other than the default and alpha versions are removed, as
is the include from math.h.
Tested for x86_64 and x86. Also did compilation-only testing with
build-many-glibcs.py.
* bits/long-double.h: New file.
* sysdeps/ieee754/ldbl-128/bits/long-double.h: Likewise.
* sysdeps/ieee754/ldbl-96/bits/long-double.h: Likewise.
* sysdeps/ieee754/ldbl-opt/bits/long-double.h: Likewise.
* sysdeps/mips/bits/long-double.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/long-double.h: Likewise.
* math/Makefile (headers): Add bits/long-double.h.
* misc/sys/cdefs.h: Include <bits/long-double.h>.
* stdlib/strtold.c: Include <bits/long-double.h> instead of
<bits/wordsize.h>.
* bits/mathdef.h [!_COMPLEX_H]: Do not allow inclusion.
[!__NO_LONG_DOUBLE_MATH]: Remove conditional code.
* math/math.h: Do not include <bits/mathdef.h>.
* sysdeps/aarch64/bits/mathdef.h: Remove file.
* sysdeps/alpha/bits/mathdef.h [!_COMPLEX_H]: Do not allow
inclusion.
* sysdeps/ia64/bits/mathdef.h: Remove file.
* sysdeps/m68k/m680x0/bits/mathdef.h: Likewise.
* sysdeps/mips/bits/mathdef.h: Likewise.
* sysdeps/powerpc/bits/mathdef.h: Likewise.
* sysdeps/s390/bits/mathdef.h: Likewise.
* sysdeps/sparc/bits/mathdef.h: Likewise.
* sysdeps/x86/bits/mathdef.h: Likewise.
* sysdeps/s390/s390-32/bits/wordsize.h
[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]: Remove
conditional code.
* sysdeps/s390/s390-64/bits/wordsize.h
[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]:
Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/wordsize.h
[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/wordsize.h
[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]:
Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/wordsize.h
[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]:
Likewise.
Continuing the refactoring of bits/mathdef.h, this patch stops it
defining FP_ILOGB0 and FP_ILOGBNAN, moving the required information to
a new header bits/fp-logb.h.
There are only two possible values of each of those macros permitted
by ISO C. TS 18661-1 adds corresponding macros for llogb, and their
values are required to correspond to those of the ilogb macros in the
obvious way. Thus two boolean values - for which the same choices are
correct for most architectures - suffice to determine the value of all
these macros, and by defining macros for those boolean values in
bits/fp-logb.h we can then define the public FP_* macros in math.h and
avoid the present duplication of the associated feature test macro
logic.
This patch duly moves to bits/fp-logb.h defining __FP_LOGB0_IS_MIN and
__FP_LOGBNAN_IS_MIN. Default definitions of those to 0 are correct
for both architectures, while ia64, m68k and x86 get their own
versions of bits/fp-logb.h to reflect their use of values different
from the defaults.
The patch renders many copies of bits/mathdef.h trivial (needed only
to avoid the default __NO_LONG_DOUBLE_MATH). I'll revise
<https://sourceware.org/ml/libc-alpha/2016-11/msg00865.html>
accordingly so that it removes all bits/mathdef.h headers except the
default one and the alpha one, and arranges for the header to be
included only by complex.h as the only remaining use at that point
will be for the alpha ABI issues there.
Tested for x86_64 and x86. Also did compile-only testing with
build-many-glibcs.py (using glibc sources from before the commit that
introduced many build failures with undefined __GI___sigsetjmp).
* bits/fp-logb.h: New file.
* sysdeps/ia64/bits/fp-logb.h: Likewise.
* sysdeps/m68k/m680x0/bits/fp-logb.h: Likewise.
* sysdeps/x86/bits/fp-logb.h: Likewise.
* math/Makefile (headers): Add bits/fp-logb.h.
* math/math.h: Include <bits/fp-logb.h>.
[__USE_ISOC99] (FP_ILOGB0): Define based on __FP_LOGB0_IS_MIN.
[__USE_ISOC99] (FP_ILOGBNAN): Define based on __FP_LOGBNAN_IS_MIN.
* bits/mathdef.h (FP_ILOGB0): Remove.
(FP_ILOGBNAN): Likewise.
* sysdeps/aarch64/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/alpha/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/ia64/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/m68k/m680x0/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/mips/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/powerpc/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/s390/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/sparc/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/x86/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
At present, definitions of float_t and double_t are split among many
bits/mathdef.h headers.
For all but three architectures, these types are float and double.
Furthermore, if you assume __FLT_EVAL_METHOD__ to be defined, that
provides a more generic way of determining the correct values of these
typedefs. Defining these typedefs more generally based on
__FLT_EVAL_METHOD__ was previously proposed by Paul Eggert in
<https://sourceware.org/ml/libc-alpha/2012-02/msg00002.html>.
This patch refactors things in the way I proposed in
<https://sourceware.org/ml/libc-alpha/2016-11/msg00745.html>. A new
header bits/flt-eval-method.h defines a single macro,
__GLIBC_FLT_EVAL_METHOD, which is then used by math.h to define
float_t and double_t. The default is based on __FLT_EVAL_METHOD__
(although actually a default to 0 would have the same effect for
current ports, because ports where values other than 0 or 16 are
possible all have their own headers).
To avoid changing the existing semantics in any case, including for
compilers not defining __FLT_EVAL_METHOD__, architecture-specific
files are then added for m68k, s390, x86 which replicate the existing
semantics. At least with __FLT_EVAL_METHOD__ values possible with
GCC, there should be no change to the choices of float_t and double_t
for any supported configuration.
Architecture maintainer notes:
* m68k: sysdeps/m68k/m680x0/bits/flt-eval-method.h always defines
__GLIBC_FLT_EVAL_METHOD to 2 to replicate the existing logic. But
actually GCC defines __FLT_EVAL_METHOD__ to 0 if TARGET_68040. It
might make sense to make the header prefer to base things on
__FLT_EVAL_METHOD__ if defined, like the x86 version, and so make
the choices of these types more accurate (with a NEWS entry as for
the other changes to these types on particular architectures).
* s390: sysdeps/s390/bits/flt-eval-method.h always defines
__GLIBC_FLT_EVAL_METHOD to 1 to replicate the existing logic. As
previously discussed, it might make sense in coordination with GCC
to eliminate the historic mistake, avoid excess precision in the
-fexcess-precision=standard case and make the typedefs match (with a
NEWS entry, again).
Tested for x86-64 and x86. Also did compilation-only testing with
build-many-glibcs.py.
* bits/flt-eval-method.h: New file.
* sysdeps/m68k/m680x0/bits/flt-eval-method.h: Likewise.
* sysdeps/s390/bits/flt-eval-method.h: Likewise.
* sysdeps/x86/bits/flt-eval-method.h: Likewise.
* math/Makefile (headers): Add bits/flt-eval-method.h.
* math/math.h: Include <bits/flt-eval-method.h>.
[__USE_ISOC99] (float_t): Define based on __GLIBC_FLT_EVAL_METHOD.
[__USE_ISOC99] (double_t): Likewise.
* bits/mathdef.h (float_t): Remove.
(double_t): Likewise.
* sysdeps/aarch64/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/alpha/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/arm/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/hppa/fpu/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/ia64/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/m68k/m680x0/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/mips/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/powerpc/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/s390/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/sh/sh4/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/sparc/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/tile/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/x86/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
TS 18661-1 defines a type femode_t to represent the set of dynamic
floating-point control modes (such as the rounding mode and trap
enablement modes), and functions fegetmode and fesetmode to manipulate
those modes (without affecting other state such as the raised
exception flags) and a corresponding macro FE_DFL_MODE.
This patch series implements those interfaces for glibc. This first
patch adds the architecture-independent pieces, the x86 and x86_64
implementations, and the <bits/fenv.h> and ABI baseline updates for
all architectures so glibc keeps building and passing the ABI tests on
all architectures. Subsequent patches add the fegetmode and fesetmode
implementations for other architectures.
femode_t is generally an integer type - the same type as fenv_t, or as
the single element of fenv_t where fenv_t is a structure containing a
single integer (or the single relevant element, where it has elements
for both status and control registers) - except where architecture
properties or consistency with the fenv_t implementation indicate
otherwise. FE_DFL_MODE follows FE_DFL_ENV in whether it's a magic
pointer value (-1 cast to const femode_t *), a value that can be
distinguished from valid pointers by its high bits but otherwise
contains a representation of the desired register contents, or a
pointer to a constant variable (the powerpc case; __fe_dfl_mode is
added as an exported constant object, an alias to __fe_dfl_env).
Note that where architectures (that share a register between control
and status bits) gain definitions of new floating-point control or
status bits in future, the implementations of fesetmode for those
architectures may need updating (depending on whether the new bits are
control or status bits and what the implementation does with
previously unknown bits), just like existing implementations of
<fenv.h> functions that take care not to touch reserved bits may need
updating when the set of reserved bits changes. (As any new bits are
outside the scope of ISO C, that's just a quality-of-implementation
issue for supporting them, not a conformance issue.)
As with fenv_t, femode_t should properly include any software DFP
rounding mode (and for both fenv_t and femode_t I'd consider that
fragment of DFP support appropriate for inclusion in glibc even in the
absence of the rest of libdfp; hardware DFP rounding modes should
already be included if the definitions of which bits are status /
control bits are correct).
Tested for x86_64, x86, mips64 (hard float, and soft float to test the
fallback version), arm (hard float) and powerpc (hard float, soft
float and e500). Other architecture versions are untested.
* math/fegetmode.c: New file.
* math/fesetmode.c: Likewise.
* sysdeps/i386/fpu/fegetmode.c: Likewise.
* sysdeps/i386/fpu/fesetmode.c: Likewise.
* sysdeps/x86_64/fpu/fegetmode.c: Likewise.
* sysdeps/x86_64/fpu/fesetmode.c: Likewise.
* math/fenv.h: Update comment on inclusion of <bits/fenv.h>.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (fegetmode): New function
declaration.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (fesetmode): Likewise.
* bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New
typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/aarch64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/alpha/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/arm/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/hppa/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/ia64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/m68k/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/microblaze/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/mips/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/nios2/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/powerpc/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (__fe_dfl_mode): New variable
declaration.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/s390/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/sh/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/sparc/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/tile/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/x86/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* manual/arith.texi (FE_DFL_MODE): Document macro.
(fegetmode): Document function.
(fesetmode): Likewise.
* math/Versions (fegetmode): New libm symbol at version
GLIBC_2.25.
(fesetmode): Likewise.
* math/Makefile (libm-support): Add fegetmode and fesetmode.
(tests): Add test-femode and test-femode-traps.
* math/test-femode-traps.c: New file.
* math/test-femode.c: Likewise.
* sysdeps/powerpc/fpu/fenv_const.c (__fe_dfl_mode): Declare as
alias for __fe_dfl_env.
* sysdeps/powerpc/nofpu/fenv_const.c (__fe_dfl_mode): Likewise.
* sysdeps/powerpc/powerpc32/e500/nofpu/fenv_const.c
(__fe_dfl_mode): Likewise.
* sysdeps/powerpc/Versions (__fe_dfl_mode): New libm symbol at
version GLIBC_2.25.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
It was noted in
<https://sourceware.org/ml/libc-alpha/2012-09/msg00305.html> that the
bits/*.h naming scheme should only be used for installed headers.
This patch renames bits/atomic.h to atomic-machine.h to follow that
convention.
This is the only change in this series that needs to change the
filename rather than simply removing a directory level (because both
atomic.h and bits/atomic.h exist at present).
Tested for x86_64 (testsuite, and that installed stripped shared
libraries are unchanged by the patch).
[BZ #14912]
* sysdeps/aarch64/bits/atomic.h: Move to ...
* sysdeps/aarch64/atomic-machine.h: ...here.
(_AARCH64_BITS_ATOMIC_H): Rename macro to
_AARCH64_ATOMIC_MACHINE_H.
* sysdeps/alpha/bits/atomic.h: Move to ...
* sysdeps/alpha/atomic-machine.h: ...here.
* sysdeps/arm/bits/atomic.h: Move to ...
* sysdeps/arm/atomic-machine.h: ...here. Update comments.
* bits/atomic.h: Move to ...
* sysdeps/generic/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/i386/bits/atomic.h: Move to ...
* sysdeps/i386/atomic-machine.h: ...here.
* sysdeps/ia64/bits/atomic.h: Move to ...
* sysdeps/ia64/atomic-machine.h: ...here.
* sysdeps/m68k/coldfire/bits/atomic.h: Move to ...
* sysdeps/m68k/coldfire/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/m68k/m680x0/m68020/bits/atomic.h: Move to ...
* sysdeps/m68k/m680x0/m68020/atomic-machine.h: ...here.
* sysdeps/microblaze/bits/atomic.h: Move to ...
* sysdeps/microblaze/atomic-machine.h: ...here.
* sysdeps/mips/bits/atomic.h: Move to ...
* sysdeps/mips/atomic-machine.h: ...here.
(_MIPS_BITS_ATOMIC_H): Rename macro to _MIPS_ATOMIC_MACHINE_H.
* sysdeps/powerpc/bits/atomic.h: Move to ...
* sysdeps/powerpc/atomic-machine.h: ...here. Update comments.
* sysdeps/powerpc/powerpc32/bits/atomic.h: Move to ...
* sysdeps/powerpc/powerpc32/atomic-machine.h: ...here. Update
comments. Include <atomic-machine.h> instead of <bits/atomic.h>.
* sysdeps/powerpc/powerpc64/bits/atomic.h: Move to ...
* sysdeps/powerpc/powerpc64/atomic-machine.h: ...here. Include
<atomic-machine.h> instead of <bits/atomic.h>.
* sysdeps/s390/bits/atomic.h: Move to ...
* sysdeps/s390/atomic-machine.h: ...here.
* sysdeps/sparc/sparc32/bits/atomic.h: Move to ...
* sysdeps/sparc/sparc32/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/sparc/sparc32/sparcv9/bits/atomic.h: Move to ...
* sysdeps/sparc/sparc32/sparcv9/atomic-machine.h: ...here.
* sysdeps/sparc/sparc64/bits/atomic.h: Move to ...
* sysdeps/sparc/sparc64/atomic-machine.h: ...here.
* sysdeps/tile/bits/atomic.h: Move to ...
* sysdeps/tile/atomic-machine.h: ...here.
* sysdeps/tile/tilegx/bits/atomic.h: Move to ...
* sysdeps/tile/tilegx/atomic-machine.h: ...here. Include
<sysdeps/tile/atomic-machine.h> instead of
<sysdeps/tile/bits/atomic.h>.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/tile/tilepro/bits/atomic.h: Move to ...
* sysdeps/tile/tilepro/atomic-machine.h: ...here. Include
<sysdeps/tile/atomic-machine.h> instead of
<sysdeps/tile/bits/atomic.h>.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/unix/sysv/linux/arm/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/arm/atomic-machine.h: ...here. Include
<sysdeps/arm/atomic-machine.h> instead of
<sysdeps/arm/bits/atomic.h>.
* sysdeps/unix/sysv/linux/hppa/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/hppa/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/unix/sysv/linux/m68k/coldfire/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/m68k/coldfire/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/unix/sysv/linux/nios2/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/nios2/atomic-machine.h: ...here.
(_NIOS2_BITS_ATOMIC_H): Rename macro to _NIOS2_ATOMIC_MACHINE_H.
* sysdeps/unix/sysv/linux/sh/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/sh/atomic-machine.h: ...here.
* sysdeps/x86_64/bits/atomic.h: Move to ...
* sysdeps/x86_64/atomic-machine.h: ...here.
* include/atomic.h: Include <atomic-machine.h> instead of
<bits/atomic.h>.
There are a few .set mips* assembler directives used in the MIPS specific
sysdep code that force an instruction to be assembled for a specific ISA.
The reason for these is to allow an instruction to be encoded when it might
not be supported in the current ISA (when the code is run the Linux kernel
will trap and emulate any unsupported instructions). Unfortunately forcing
a specific ISA means that when assembling for a newer ISA, where the
instruction has a different encoding, the wrong encoding will be used.
* sysdeps/mips/bits/atomic.h [_MIPS_SIM == _ABIO32] (MIPS_PUSH_MIPS2):
Only use .set mips2 if the current ISA is below mips2.
* sysdeps/mips/sys/tas.h [_MIPS_SIM == _ABIO32] (_test_and_set):
Likewise.
* sysdeps/mips/nptl/tls.h (READ_THREAD_POINTER): Only use .set
mips32r2 if the current ISA is below mips32r2.
* sysdeps/mips/tls-macros.h (TLS_RDHWR): New define.
(TLS_IE): Updated to use the TLD_RDHWR macro.
(TLS_LE): Likewise.
* sysdeps/unix/mips/sysdep.h (__mips_isa_rev): Moved out of #ifdef
__ASSEMBLER__ condition.
It was noted in
<https://sourceware.org/ml/libc-alpha/2012-09/msg00305.html> that the
bits/*.h naming scheme should only be used for installed headers.
This patch renames bits/linkmap.h to plain linkmap.h to follow that
convention.
Tested for x86_64 (testsuite, and that installed stripped shared
libraries are unchanged by the patch).
[BZ #14912]
* bits/linkmap.h: Move to ...
* sysdeps/generic/linkmap.h: ...here.
* sysdeps/aarch64/bits/linkmap.h: Move to ...
* sysdeps/aarch64/linkmap.h: ...here.
* sysdeps/arm/bits/linkmap.h: Move to ...
* sysdeps/arm/linkmap.h: ...here.
* sysdeps/hppa/bits/linkmap.h: Move to ...
* sysdeps/hppa/linkmap.h: ...here.
* sysdeps/ia64/bits/linkmap.h: Move to ...
* sysdeps/ia64/linkmap.h: ...here.
* sysdeps/mips/bits/linkmap.h: Move to ...
* sysdeps/mips/linkmap.h: ...here.
* sysdeps/s390/bits/linkmap.h: Move to ...
* sysdeps/s390/linkmap.h: ...here.
* sysdeps/sh/bits/linkmap.h: Move to ...
* sysdeps/sh/linkmap.h: ...here.
* sysdeps/x86/bits/linkmap.h: Move to ...
* sysdeps/x86/linkmap.h: ...here.
* include/link.h: Include <linkmap.h> instead of <bits/linkmap.h>.
This patch disables use of 64-bit atomics for MIPS n32 to fix the
problems with unaligned semaphores.
Before 64-bit atomics are used for anything for which such alignment
issues do not arise, and before the addition of any new ILP32 ports
with 64-bit semaphores for which the ABI can be set to have the
greater alignment (AARCH64?), a better approach will need to be
established that allows architectures to declare their 64-bit atomics
availability accurately, without doing so causing inappropriate use of
such atomics on unaligned semaphores.
Tested for MIPS n32 that this fixes the nptl/tst-sem3 failure.
* sysdeps/mips/bits/atomic.h [_MIPS_SIM == _ABIN32]
(__HAVE_64B_ATOMICS): Define to 0.
This sets __HAVE_64B_ATOMICS if provided. It also sets
USE_ATOMIC_COMPILER_BUILTINS to true if the existing atomic ops use the
__atomic* builtins (aarch64, mips partially) or if this has been
tested (x86_64); otherwise, this is set to false so that C11 atomics will
be based on the existing atomic operations.
This patch fixes -Wundef warnings related to the _ABI* macros on MIPS.
GCC predefines only the _ABI* macro related to the ABI actually in
use, meaning that a conditional such as "#if _MIPS_SIM == _ABI64" is
true only for the ABI in question (all the macros are nonzero), but
produces a -Wundef warning for the other ABIs. The normal approach to
using these macros is to include <sgidefs.h>, which ensures that all
three _ABI* macros are defined rather than just one; this patch does
so in the places that caused warnings (the bulk of the warnings
arising from <bits/wordsize.h>). Tested that the warnings are fixed.
* sysdeps/mips/bits/wordsize.h: Include <sgidefs.h>.
* sysdeps/unix/sysv/linux/mips/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/mips/setrlimit64.c: Likewise.
I've moved the MIPS port from ports to the main sysdeps hierarchy.
Beyond the README update, the move of the files was simply
git mv ports/sysdeps/mips sysdeps/mips
git mv ports/sysdeps/unix/mips sysdeps/unix/mips
git mv ports/sysdeps/unix/sysv/linux/mips sysdeps/unix/sysv/linux/mips
and in addition to the ChangeLog entries here, I put a note at the top
of ports/ChangeLog.mips similar to those in other files.
Tested that disassembly of installed shared libraries for mips is the
same before and after this patch (except for ld.so where paths in
assertions are involved, as for arm).
* sysdeps/mips: Move directory from ports/sysdeps/mips.
* sysdeps/unix/mips: Move directory from ports/sysdeps/unix/mips.
* sysdeps/unix/sysv/linux/mips: Move directory from
ports/sysdeps/unix/sysv/linux/mips.
* README: Update listing for mips-*-linux-gnu and
mips64-*-linux-gnu.
* sysdeps/mips: Move directory to ../sysdeps/mips.
* sysdeps/unix/mips: Move directory to ../sysdeps/unix/mips.
* sysdeps/unix/sysv/linux/mips: Move directory to
../sysdeps/unix/sysv/linux/mips.
* math/multc3.c: New file.
* sysdeps/unix/sysv/linux/sparc/sparc32/Makefile
[$(subdir) = math] (libm-routines): Add multc3, divtc3.
* sysdeps/unix/sysv/linux/sparc/sparc32/fpu/Implies: New file.
* sysdeps/sparc/sparc32/fpu/s_fabsl.c: Include math.h and
math_ldbl_opt.h.
(fabsl): Use long_double_symbol instead of weak_alias.
* sysdeps/sparc/sparc32/fpu/s_fabs.c: Include math.h and
math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (fabsl): Add compat_symbol.
2006-01-31 Martin Schwidefsky <schwidefsky@de.ibm.com>
Jakub Jelinek <jakub@redhat.com>
* sysdeps/unix/sysv/linux/s390/Implies: New file.
* sysdeps/unix/sysv/linux/s390/fpu/Implies: New file.
* sysdeps/unix/sysv/linux/s390/nldbl-abi.h: New file.
* sysdeps/s390/fpu/bits/mathinline.h (signbitl, sqrtl): New inlines.
* sysdeps/s390/bits/mathdef.h: New file.
* sysdeps/s390/fpu/e_sqrtl.c: New file.
* sysdeps/s390/s390-32/bits/wordsize.h (__LONG_DOUBLE_MATH_OPTIONAL,
__NO_LONG_DOUBLE_MATH): Define.
* sysdeps/s390/s390-64/bits/wordsize.h: Likewise.
* sysdeps/s390/Implies: Add ieee754/ldbl-128.
* sysdeps/s390/ldbl2mpn.c: File removed.
* sysdeps/s390/fpu/libm-test-ulps: Updated.
2006-01-31 Roland McGrath <roland@redhat.com>
* sysdeps/alpha/fpu/bits/mathdef.h: Moved to ...
* sysdeps/alpha/bits/mathdef.h: ... here.
* sysdeps/i386/fpu/bits/mathdef.h: Moved to ...
* sysdeps/i386/bits/mathdef.h: ... here.
* sysdeps/mips/fpu/bits/mathdef.h: Moved to ...
* sysdeps/mips/bits/mathdef.h: ... here.
* sysdeps/m68k/fpu/bits/mathdef.h: Moved to ...
* sysdeps/m68k/bits/mathdef.h: ... here.
* sysdeps/powerpc/fpu/bits/mathdef.h: Moved to ...
* sysdeps/powerpc/bits/mathdef.h: ... here.
* sysdeps/sparc/fpu/bits/mathdef.h: Moved to ...
* sysdeps/sparc/bits/mathdef.h: ... here.
* sysdeps/ia64/fpu/bits/mathdef.h: Moved to ...
* sysdeps/ia64/bits/mathdef.h: ... here.
* sysdeps/sh/sh4/fpu/bits/mathdef.h: Moved to ...
* sysdeps/sh/sh4/bits/mathdef.h: ... here.
* sysdeps/x86_64/fpu/bits/mathdef.h: Moved to ...
* sysdeps/x86_64/bits/mathdef.h: ... here.
2006-01-31 Jakub Jelinek <jakub@redhat.com>
protection and allow pthread.h to include bits/setjmp.h as well as
setjmp.h.
* sysdeps/m68k/bits/setjmp.h: Likewise.
* sysdeps/s390/bits/setjmp.h: Make sure only setjmp.h or pthread.h
are allow to include bits/setjmp.h.
* sysdeps/mips/bits/setjmp.h (_JMPBUF_UNWINDS): Cast rhs to match lhs
cast of address.
* sysdeps/sh/bits/setjmp.h: Likewise.
2005-11-12 Jim Meyering <jim@meyering.net>
* sysdeps/unix/opendir.c (__alloc_dir): Declare STATP parameter
to be pointer to const.
* include/dirent.h: Update decl.
__NTH instead of __THROW in the inline definition.
* sysdeps/unix/sysv/linux/mips/sys/tas.h (_test_and_set): Likewise.
* sysdeps/mips/bits/dlfcn.h (RTLD_DEEPBIND): New macro.
* sysdeps/unix/sysv/linux/mips/bits/mman.h
(PROT_GROWSDOWN, PROT_GROWSUP): New macros.
* sysdeps/unix/sysv/linux/mips/Makefile ($(objpfx)syscall-%.h):
Sort by syscalls. Make sure we get headers such as sgidefs.h from
the build tree before just-installed ones.
* sysdeps/mips/atomicity.h, sysdeps/mips/dl-machine.h,
sysdeps/mips/machine-gmon.h, sysdeps/mips/bits/setjmp.h,
sysdeps/mips/fpu/bits/mathdef.h,
sysdeps/mips/mips64/__longjmp.c,
sysdeps/mips/mips64/setjmp_aux.c,
sysdeps/unix/sysv/linux/mips/kernel_stat.h,
sysdeps/unix/sysv/linux/mips/pread.c,
sysdeps/unix/sysv/linux/mips/pread64.c,
sysdeps/unix/sysv/linux/mips/ptrace.c,
sysdeps/unix/sysv/linux/mips/pwrite.c,
sysdeps/unix/sysv/linux/mips/pwrite64.c,
sysdeps/unix/sysv/linux/mips/sigaction.c,
sysdeps/unix/sysv/linux/mips/sigcontextinfo.h,
sysdeps/unix/sysv/linux/mips/bits/fcntl.h,
sysdeps/unix/sysv/linux/mips/bits/sigcontext.h,
sysdeps/unix/sysv/linux/mips/bits/stat.h,
sysdeps/unix/sysv/linux/mips/sys/procfs.h,
sysdeps/unix/sysv/linux/mips/sys/ptrace.h,
sysdeps/unix/sysv/linux/mips/sys/tas.h,
sysdeps/unix/sysv/linux/mips/sys/ucontext.h,
sysdeps/unix/sysv/linux/mips/sys/user.h: Use standard names
for ABI macros, include sgidefs.h where appropriate.
sysdeps/unix/sysv/linux/mips/Makefile ($(objpfx)syscall-%.h):
Likewise.
sysdeps/unix/sysv/linux/mips/configure.in (asm-unistd.h):
Likewise.
sysdeps/unix/sysv/linux/mips/configure: Rebuilt.
2003-03-20 Alexandre Oliva <aoliva@redhat.com>
* sysdeps/mips/bits/setjmp.h: Store all N32 and N64 registers,
including pc, gp, sp and fp, as long long.
* sysdeps/mips/mips64/setjmp.S: Pass gp to __sigsetjmp_aux.
* sysdeps/mips/mips64/setjmp_aux.c: Adjust type of arguments.
Add gp argument, and set gp in the jmpbuf to it.
* sysdeps/mips/setjmp_aux.c: Revert to o32-only.
Check for the result overflowing off_t and fail with EOVERFLOW.
* libio/ioftell.c (_IO_ftell): Likewise.
* libio/iofgetpos.c (_IO_new_fgetpos): Likewise.
* login/logwtmp.c (logwtmp): If sizeof ut_tv != sizeof struct timeval,
use a temporary timeval on the stack for gettimeofday and copy it.
* login/logout.c (logout): Likewise.
Reported by Steven Munroe <sjmunroe@us.ibm.com>.
* sysdeps/unix/sysv/linux/bits/statfs.h (struct statfs):
Use __SWORD_TYPE instead of int for member types.
(struct statfs64): Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/statfs.h: New file.
* sysdeps/unix/sysv/linux/s390/bits/statfs.h: New file.
* sysdeps/unix/sysv/linux/ia64/bits/statfs.h: File removed.
* sysdeps/unix/sysv/linux/sparc/bits/statfs.h: File removed.
* sysdeps/unix/sysv/linux/x86_64/bits/statfs.h: File removed.
* sysdeps/unix/sysv/linux/sparc/bits/statvfs.h: Moved to ...
* sysdeps/unix/sysv/linux/bits/statvfs.h: ... here.
(ST_NODIRATIME): Restore fixed value of 2048.
* sysdeps/unix/sysv/linux/alpha/bits/statvfs.h: File removed.
* sysdeps/unix/sysv/linux/ia64/bits/statvfs.h: File removed.
Rearranged <bits/types.h> definitions to reduce duplication.
* sysdeps/generic/bits/types.h: Rewritten, using macros from
<bits/wordsize.h> and new header <bits/typesizes.h>.
* posix/Makefile (headers): Add bits/typesizes.h here.
* sysdeps/generic/bits/typesizes.h: New file.
* sysdeps/unix/sysv/linux/alpha/bits/typesizes.h: New file.
* sysdeps/unix/sysv/linux/sparc/bits/typesizes.h: New file.
* sysdeps/mach/hurd/bits/typesizes.h: New file.
* sysdeps/unix/sysv/linux/alpha/bits/types.h: File removed.
* sysdeps/unix/sysv/linux/bits/types.h: File removed.
* sysdeps/unix/sysv/linux/ia64/bits/types.h: File removed.
* sysdeps/unix/sysv/linux/mips/bits/types.h: File removed.
* sysdeps/unix/sysv/linux/s390/bits/types.h: File removed.
* sysdeps/unix/sysv/linux/sparc/bits/types.h: File removed.
* sysdeps/unix/sysv/linux/x86_64/bits/types.h: File removed.
* posix/sys/types.h [__USE_POSIX199506 || __USE_UNIX98]: Include
<bits/pthreadtypes.h> here, not in <bits/types.h>.
* signal/signal.h: Likewise.
* streams/stropts.h: Include <bits/xtitypes.h>.
* streams/Makefile (headers): Add bits/xtitypes.h here.
* sysdeps/generic/bits/xtitypes.h: New file.
* sysdeps/s390/bits/xtitypes.h: New file.
* sysdeps/ia64/bits/xtitypes.h: New file.
* sysdeps/x86_64/bits/xtitypes.h: New file.
* sysvipc/Makefile (headers): Add bits/ipctypes.h here.
* sysdeps/generic/bits/ipctypes.h: New file.
* sysdeps/mips/bits/ipctypes.h: New file.
* sysdeps/gnu/bits/shm.h: Include <bits/ipctypes.h>.
* sysdeps/gnu/bits/msq.h: Likewise.
* sysvipc/sys/ipc.h: Likewise.
2002-10-22 Roland McGrath <roland@redhat.com>
* sysdeps/generic/libc-tls.c (_dl_tls_static_used): New variable.
* sysdeps/generic/ldsodefs.h (struct rtld_global): New member
`_dl_tls_static_used'.
(TLS_STATIC_MIN): New macro.
* elf/dl-reloc.c [USE_TLS] (allocate_static_tls): New function.
(CHECK_STATIC_TLS): Use it.
2001-10-26 Ulrich Drepper <drepper@redhat.com>
* string/strxfrm.c [USE_IN_EXTENDED_LOCALE_MODEL]: Correctly get
nrules value.
2001-10-24 H.J. Lu <hjl@gnu.org>
* sysdeps/generic/bits/dlfcn.h (DL_CALL_FCT): Cast to void *.
Use __BEGIN_DECLS/__END_DECLS around prototypes.
* sysdeps/mips/bits/dlfcn.h (DL_CALL_FCT): Likewise.
2001-10-21 Jim Meyering <meyering@lucent.com>
* malloc/obstack.c (_): Honor the setting of ENABLE_NLS. Otherwise,
this code would end up calling gettext even in packages built
with --disable-nls.
* posix/getopt.c (_): Likewise.
* posix/regex.c (_): Likewise.
2001-10-26 Ulrich Drepper <drepper@redhat.com>
* resolv/gethnamaddr.c (gethostbyaddr): Use ip6.addr for reverse
lookup not ip6.int.
* resolv/nss_dns/dns-host.c (_nss_dns_gethostbyaddr_r): Likewise.
Reported by Martin.v.Loewis@t-online.de [PR libc/2598].
2001-10-19 Jakub Jelinek <jakub@redhat.com>
* misc/sys/cdefs.h (__attribute_used__): Define.
* elf/rtld.c (_dl_start): Add __attribute_used__.
* elf/dl-runtime.c (fixup, profile_fixup): Likewise.
2001-07-06 Paul Eggert <eggert@twinsun.com>
* manual/argp.texi: Remove ignored LGPL copyright notice; it's
not appropriate for documentation anyway.
* manual/libc-texinfo.sh: "Library General Public License" ->
"Lesser General Public License".
2001-07-06 Andreas Jaeger <aj@suse.de>
* All files under GPL/LGPL version 2: Place under LGPL version
2.1.
* stdlib/Makefile (headers): Add bits/wchar.h.
* sysdeps/unix/sysv/linux/i386/bits/wchar.h: New file.
* sysdeps/generic/bits/wchar.h: New file.
* sysdeps/generic/stdint.h: Include <bits/wchar.h>. Use values in this
file to define WCHAR_MIN and WCHAR_MAX.
Change UINT*8_MAX and UIN*16_MAX value to type int.
* wcsmbs/wchar.h: Include <bits/wchar.h>. Use values in this
file to define WCHAR_MIN and WCHAR_MAX.
* sysdeps/alpha/fpu/bits/mathdef.h: Make FP_ILOGB0 and FP_ILOGBNAN
int values.
* sysdeps/arm/fpu/bits/mathdef.h: Likewise.
* sysdeps/generic/bits/mathdef.h: Likewise.
* sysdeps/i386/fpu/bits/mathdef.h: Likewise.
* sysdeps/m68k/fpu/bits/mathdef.h: Likewise.
* sysdeps/powerpc/fpu/bits/mathdef.h: Likewise.
* sysdeps/sparc/fpu/bits/mathdef.h: Likewise.
* locale/locale.h (struct lconv): Add __ prefix to the new members
if not C99.
* sysdeps/generic/inttypes.h: Remove unnecessary imaxabs and
imaxdiv optimizations.
* sysdeps/wordsize-32/lldiv.c: Add hack to make alias work.
* sysdeps/wordsize-64/ldiv.c: Likewise.
* sysdeps/alpha/fpu/bits/fenv.h: Change type of FE_*_ENV macros to
const fenv_t*.
* sysdeps/generic/bits/fenv.h: Likewise.
* sysdeps/i386/fpu/bits/fenv.h: Likewise.
* sysdeps/ia64/bits/fenv.h: Likewise.
* sysdeps/m68k/fpu/bits/fenv.h: Likewise.
* sysdeps/mips/bits/fenv.h: Likewise.
* sysdeps/s390/fpu/bits/fenv.h: Likewise.
* sysdeps/sparc/fpu/bits/fenv.h: Likewise.
Reported by Joseph S. Myers <jsm28@cam.ac.uk>.
* catgets/open_catalog.c: Likewise.
* elf/elf.h: Add various DF_1_*, DTF_1_*, and DF_P1_* entries.
* elf/dl-close.c (_dl_close): Don't close an object if it is marked
with nodelete.
* elf/dl-open.c (dl_open_worker): Pass RTLD_NOLOAD as new parameter
to _dl_map_object. Return immediately if no object loaded.
Set DF_1_NODELETE bit in l_flags_1 if RTLD_NODELETE was passed.
* elf/dynamic-link.h (elf_get_dynamic_info): Copy DT_FLAGS_1 entry
if it exists into l_flags_1 word.
* elf/dl-load.c (_dl_map_object_from_fd): Take no parameter and use
it to determine whether loading is wanted or not.
(_dl_map_object): Likewise.
Call _dl_map_object_from_fd with new parameter.
* sysdeps/generic/ldsodefs.h: Update prototype.
* elf/dl-deps.c: Add new parameter to _dl_map_object calls.
* elf/rtld.c: Likewise.
* elf/Makefile (tests): Add noload. Add rules to generate noload.
* elf/noload.c: New file.
* include/link.h (struct link_map): Add l_feature_1 and l_flags_1.
* sysdeps/generic/bits/dlfcn.h: Define RTLD_NOLOAD and RTLD_NODELETE.
* sysdeps/mips/bits/dlfcn.h: Likewise.
2000-02-28 Ulrich Drepper <drepper@redhat.com>
* sysdeps/unix/start.c: Initialize __errno and add comment
explaining why. Remove K&R compatibility.
* sysdeps/powerpc/fpu/s_isnan.c: Avoid using asm statement to
declare aliases.
* sysdeps/powerpc/Makefile: Always pass flags to compile for ppc
and not rs6000.
[$(subdir)=misc] (sysdep_routines): Add gprsave0, gprrest0,
gprsave1 , and gprrest1.
Don't pass special flags to compiler for init and gmon-start if
this is no ELF platform.
* sysdeps/mach/hurd/bits/statfs.h: Define _STATFS_F_NAMELEN.
* sysdeps/unix/sysv/linux/bits/statfs.h: Likewise.
* sysdeps/unix/sysv/linux/mips/bits/statfs.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/statfs.h: Likewise.
* sysdeps/posix/fpathconf.c: Don't unconditionally use f_namelen
in statfs. Check feature macro and use f_name_max or NAME_MAX
instead.
* sysdeps/posix/pathconf.c: Likewise.
* dlfcn/dlfcn.h: Remove DL_CALL_FCT definition here.
* sysdeps/generic/bits/dlfcn.h: Define DL_CALL_FCT here.
* sysdeps/mips/bits/dlfcn.h: Define DL_CALL_FCT here.
* iconv/skeleton.c: If DL_CALL_FCT is not yet defined, add dumy
definition here.
* sysdeps/generic/libc-start.c: Fix typo in comment.
* include/set-hooks.h: Allow systems to not define
symbol_set_define.
* configure.in: Unify machine names rs6000 and powerpc.
1999-08-21 Mark Kettenis <kettenis@gnu.org>
* stdio-common/vfscanf.c [! USE_IN_LIBIO]: Add necessary
definitions for MEMCPY, ISSPACE, ISDIGIT, ISXDIGIT, TOLOWER, L_,
CHAR_T, UCHAR_T and WIN_T to make the code compile again when
stdio is used instead of libio.
* stdio-common/vfprintf.c [! USE_IN_LIBIO]: Add necessary
definitions for CHAR_T, UCHAR_T, INT_T, L_, ISDIGIT, PAD and PUTC
to make the code compile again when stdio is used instead of
libio.
(vfprintf): Only check for correct orientation if ORIENT is
defined.
* stdio-common/Makefile (routines): Only add vfwprintf and
vfwscanf if we're using libio.
1999-08-21 Mark Kettenis <kettenis@gnu.org>
* include/stdio.h [! USE_IN_LIBIO && __need_FILE]: Avoid defining
any additional prototype just as we do for libio.
1999-08-21 Mark Kettenis <kettenis@gnu.org>
* include/bits/xopen_lim.h: Do not define STREAM_MAX and
TZNAME_MAX. These limits are not X/Open specific.
* stdio-common/stdio_lim.h.in: Allow inclusion when __need_IOV_MAX
is defined.
1999-08-21 Mark Kettenis <kettenis@gnu.org>
* Rules: When generated stdio_lim.h, avoid defining IOV_MAX if
UIO_MAXIOV is left undefined in sys/uio.h.
* stdio-common/stdio_lim.h.in: Adapt for change above.
1999-08-21 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* sysdeps/unix/sysv/linux/mips/bits/sigaction.h (SA_RESETHAND): Add it.
* sysdeps/mips/bits/dlfcn.h: Remove SGI specific calls, add RTLD_LOCAL.
Patches by Ralf Baechle <ralf@uni-koblenz.de>
1998-11-27 Philip Blundell <pb@nexus.co.uk>
Fixes to allow compilation with static NSS:
* nss/Makefile: Make explicit the dependency of getent on
libnss_files.a.
[build_static_nss]: Define $(otherlibs) appropriately.
* nss/Depend: Add a dependency on `resolv'.
1998-11-27 Andreas Jaeger <aj@arthur.rhein-neckar.de>
Partial support for MIPS ISO C 9x exception handling:
* sysdeps/mips/fclrexcpt.c: New file.
* sysdeps/mips/ftestexcept.c: New file.
* sysdeps/mips/fgetexcptflg.c: New file.
* sysdeps/mips/fesetround.c: New file.
* sysdeps/mips/fegetround.c: New file.
* sysdeps/mips/fegetenv.c: New file.
* sysdeps/mips/fesetenv.c: New file.
* sysdeps/mips/feupdateenv.c: Likewise.
* sysdeps/mips/bits/fenv.h: New file.
1998-11-28 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* sysdeps/unix/sysv/linux/mips/bits/signum.h: Remove inclusion of
<asm/signal.h> and add needed symbols from <asm/signal.h>; bring
in sync with linux specific version.
Patches by Ralf Baechle <ralf@uni-koblenz.de> for mips-linux:
* sysdeps/unix/mips/sysdep.S: Define _errno as weak_alias, rewrite
errno declaration.
* sysdeps/unix/sysv/linux/mips/ustat.c: Use INLINE_SYSCALL instead
of calling __syscall_*.
* sysdeps/unix/sysv/linux/mips/xmknod.c: Likewise.
* sysdeps/unix/sysv/linux/mips/syscalls.list: Update entries.
* sysdeps/unix/sysv/linux/mips/sys/syscall.h: Add missing SYS_*
constants, correct values according to Linux 2.1.130.
* sysdeps/unix/sysv/linux/mips/pwrite.c: New file.
* sysdeps/unix/sysv/linux/mips/pwrite64.c: New file.
* sysdeps/unix/sysv/linux/mips/pread.c: New file.
* sysdeps/unix/sysv/linux/mips/pread64.c: New file.
* sysdeps/mips/Makefile (sysdep_routines): Use += instead of a
:=.
* sysdeps/unix/sysv/linux/mips/bits/ipc.h: Remove ipc_kludge.
* sysdeps/unix/sysv/linux/mips/xstatconv.c: New file.
* sysdeps/unix/sysv/linux/mips/xstat.c: Removed.
* sysdeps/unix/sysv/linux/mips/sys/ucontext.h: New file.
* sysdeps/unix/sysv/linux/mips/kernel_termios.h: Add copyright
message, change name of include protection, remove inclusion of
<bits/termios.h>.
* sysdeps/unix/sysv/linux/mips/kernel_sigaction.h
(old_kernel_sigaction): Define.
(struct kernel_sigaction): Rename sa_handler to k_sa_handler.
* sysdeps/unix/sysv/linux/mips/bits/time.h: Removed, we can use
the general linux version.
* sysdeps/unix/sysv/linux/mips/bits/stat.h (_STAT_VER_KERNEL): Added.
* sysdeps/unix/sysv/linux/mips/bits/socket.h: Update file.
1998-09-03 Philip Blundell <pb@nexus.co.uk>
* sysdeps/arm/bits/endian.h (__FLOAT_WORD_ORDER): Define to big
endian.
* math/math_private.h: Use __FLOAT_WORD_ORDER rather than
BYTE_ORDER.
* string/endian.h: If __FLOAT_WORD_ORDER wasn't defined by
<bits/endian.h>, make it the same as __BYTE_ORDER.
1998-11-26 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
* Makeconfig ($(common-objpfx)sysd-dirs): Use automatic variables
if possible.
($(common-objpfx)sysd-sorted): Likewise.
1998-11-27 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* sysdeps/libm-ieee754/e_log.c (__ieee754_log): Add declaration of
local variables t1,t2 only if needed.
* sysdeps/libm-ieee754/s_truncf.c (__truncf): Likewise.
* sysdeps/libm-ieee754/s_trunc.c (__trunc): Likewise.
* sysdeps/mips/mul_1.S (Loop): Add closing comment to avoid
warning.
1998-11-27 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* math/math.h: Add brace to correct #if expression.
1998-11-26 Philip Blundell <philb@gnu.org>
Undo change of 1998-11-12:
* sysdeps/unix/sysv/linux/netlink/netlink.h: Deleted.
* sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Remove
netlink/netlink.h.
* sysdeps/unix/sysv/linux/Dist: Likewise.
1998-11-22 Thorsten Kukuk <kukuk@vt.uni-paderborn.de>
* nis/nis_print.c (nis_print_entry): Changes to match Solaris output.
1998-11-26 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* sysdeps/generic/pselect.c (__pselect): Change interface,
set/restore sigmask.
* misc/sys/select.h: Change declaration according to Stevens' Unix
Network Programming.
* include/sys/select.h (__pselect): Likewise.
Reported by <bwelling@anomaly.munge.com> [PR libc/872].
* include/fpu_control.h: New file, contains __setfpucw
declaration.
* sysdeps/generic/fpu_control.h: Remove __setfpucw declaration,
it's an internal symbol.
* sysdeps/alpha/fpu/fpu_control.h: Likewise.
* sysdeps/arm/fpu/fpu_control.h: Likewise.
* sysdeps/i386/fpu_control.h: Likewise.
* sysdeps/m68k/fpu_control.h: Likewise.
* sysdeps/powerpc/fpu_control.h: Likewise.
* sysdeps/sparc/sparc32/fpu/fpu_control.h: Likewise.
* sysdeps/sparc/sparc64/fpu/fpu_control.h: Likewise.
