I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
There are a few places where only known numeric values are acceptable for
`asm` parameters, yet the constraint "i" is used. "i" can include
"symbolic constants whose values will be known only at assembly time or
later."
Use "n" instead of "i" where known numeric values are required.
Suggested-by: Segher Boessenkool <segher@kernel.crashing.org>
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
fesetenv_mode is used variously to write the FPSCR exception enable
bits and rounding mode bits. These are referred to as the control
bits in the POWER ISA. Change the name to be reflective of its
current and expected use, and match up well with fegetenv_control.
fegetenv_status is used variously to retrieve the FPSCR exception enable
bits, rounding mode bits, or both. These are referred to as the control
bits in the POWER ISA. FPSCR status bits are also returned by the
'mffs' and 'mffsl' instructions, but they are uniformly ignored by all
uses of fegetenv_status. Change the name to be reflective of its
current and expected use.
Reviewed-By: Paul E Murphy <murphyp@linux.ibm.com>
On POWER9, use more efficient means to update the 2-bit rounding mode
via the 'mffscrn' instruction (instead of two 'mtfsb0/1' instructions
or one 'mtfsfi' instruction that modifies 4 bits).
Suggested-by: Paul E. Murphy <murphyp@linux.ibm.com>
Reviewed-By: Paul E Murphy <murphyp@linux.ibm.com>
ROUND_TO_ODD and a couple of other places use libc_feupdateenv_test to
restore the rounding mode and exception enables, preserve exception flags,
and test whether given exception(s) were generated.
If the exception flags haven't changed, then it is sufficient and a bit
more efficient to just restore the rounding mode and enables, rather than
writing the full Floating-Point Status and Control Register (FPSCR).
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
fenv_private.h includes unused functions, magic macro constants, and
some replicated common code fragments.
Remove unused functions, replace magic constants with constants from
fenv_libc.h, and refactor replicated code.
Suggested-by: Paul E. Murphy <murphyp@linux.ibm.com>
Reviewed-By: Paul E Murphy <murphyp@linux.ibm.com>
SET_RESTORE_ROUND brackets a block of code, temporarily setting and
restoring the rounding mode and letting everything else, including
exceptions generated within the block, pass through.
On powerpc, the current code clears the exception enables, which will hide
exceptions generated within the block. This issue was introduced by me
in commit e905212627.
Fix this by not clearing exception enable bits in the prologue.
Also, since we are no longer changing the enable bits in either the
prologue or the epilogue, there is no need to test for entering/exiting
non-stop mode.
Also, optimize the prologue get/save/set rounding mode operations for
POWER9 and later by using 'mffscrn' when possible.
Suggested-by: Paul E. Murphy <murphyp@linux.ibm.com>
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
Fixes: e905212627
2019-09-19 Paul A. Clarke <pc@us.ibm.com>
* sysdeps/powerpc/fpu/fenv_libc.h (fegetenv_and_set_rn): New.
(__fe_mffscrn): New.
* sysdeps/powerpc/fpu/fenv_private.h (libc_feholdsetround_ppc_ctx):
Do not clear enable bits, remove obsolete code, use
fegetenv_and_set_rn.
(libc_feresetround_ppc): Remove obsolete code, use
fegetenv_and_set_rn.
fegetenv_status() wants to use the lighter weight instruction 'mffsl'
for reading the Floating-Point Status and Control Register (FPSCR).
It currently will use it directly if compiled '-mcpu=power9', and will
perform a runtime check (cpu_supports("arch_3_00")) otherwise.
Nicely, it turns out that the 'mffsl' instruction will decode to
'mffs' on architectures older than "arch_3_00" because the additional
bits set for 'mffsl' are "don't care" for 'mffs'. 'mffs' is a superset
of 'mffsl'.
So, just generate 'mffsl'.
Since fe{en,dis}ableexcept() and fesetmode() read-modify-write just the
"mode" (exception enable and rounding mode) bits of the Floating Point Status
Control Register (FPSCR), the lighter weight 'mffsl' instruction can be used
to read the FPSCR (enables and rounding mode), and 'mtfsf 0b00000011' can be
used to write just those bits back to the FPSCR. The net is better performance.
In addition, fe{en,dis}ableexcept() read the FPSCR again after writing it, or
they determine that it doesn't need to be written because it is not changing.
In either case, the local variable holds the current values of the enable
bits in the FPSCR. This local variable can be used instead of again reading
the FPSCR.
Also, that value of the FPSCR which is read the second time is validated
against the requested enables. Since the write can't fail, this validation
step is unnecessary, and can be removed. Instead, the exceptions to be
enabled (or disabled) are transformed into available bits in the FPSCR,
then validated after being transformed back, to ensure that all requested
bits are actually being set. For example, FE_INVALID_SQRT can be
requested, but cannot actually be set. This bit is not mapped during the
transformations, so a test for that bit being set before and after
transformations will show the bit would not be set, and the function will
return -1 for failure.
Finally, convert the local macros in fesetmode.c to more generally useful
macros in fenv_libc.h.
The exceptions passed to fe{en,dis}ableexcept() are defined in the ABI
as a bitmask, a combination of FE_INVALID, FE_OVERFLOW, etc.
Within the functions, these bits must be translated to/from the corresponding
enable bits in the Floating Point Status Control Register (FPSCR).
This translation is currently done bit-by-bit. The compiler generates
a series of conditional bit operations. Nicely, the "FE" exception
bits are all a uniform offset from the FPSCR enable bits, so the bit-by-bit
operation can instead be performed by a shift with appropriate masking.
Using __builtin_cpu_supports() requires support in GCC and Glibc.
My recent patch to fenv_libc.h added an unprotected use of
__builtin_cpu_supports(). Compilation of Glibc itself will fail
with a sufficiently new GCC and sufficiently old Glibc:
../sysdeps/powerpc/fpu/fegetexcept.c: In function ‘__fegetexcept’:
../sysdeps/powerpc/fpu/fenv_libc.h:52:20: error: builtin ‘__builtin_cpu_supports’ needs GLIBC (2.23 and newer) that exports hardware capability bits [-Werror]
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Fixes 3db85a9814.
Using 'mffs' instruction to read the Floating Point Status Control Register
(FPSCR) can force a processor flush in some cases, with undesirable
performance impact. If the values of the bits in the FPSCR which force the
flush are not needed, an instruction that is new to POWER9 (ISA version 3.0),
'mffsl' can be used instead.
Cases included: get_rounding_mode, fegetround, fegetmode, fegetexcept.
* sysdeps/powerpc/bits/fenvinline.h (__fegetround): Use
__fegetround_ISA300() or __fegetround_ISA2() as appropriate.
(__fegetround_ISA300) New.
(__fegetround_ISA2) New.
* sysdeps/powerpc/fpu_control.h (IS_ISA300): New.
(_FPU_MFFS): Move implementation...
(_FPU_GETCW): Here.
(_FPU_MFFSL): Move implementation....
(_FPU_GET_RC_ISA300): Here. New.
(_FPU_GET_RC): Use _FPU_GET_RC_ISA300() or _FPU_GETCW() as appropriate.
* sysdeps/powerpc/fpu/fenv_libc.h (fegetenv_status_ISA300): New.
(fegetenv_status): New.
* sysdeps/powerpc/fpu/fegetmode.c (fegetmode): Use fegetenv_status()
instead of fegetenv_register().
* sysdeps/powerpc/fpu/fegetexcept.c (__fegetexcept): Likewise.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Add 'volatile' keyword to a few asm statements, to force the compiler
to generate the instructions therein.
Some instances were implicitly volatile, but adding keyword for consistency.
2019-06-19 Paul A. Clarke <pc@us.ibm.com>
* sysdeps/powerpc/fpu/fenv_libc.h (relax_fenv_state): Add 'volatile'.
* sysdeps/powerpc/fpu/fpu_control.h (__FPU_MFFS): Likewise.
(__FPU_MFFSL): Likewise.
(_FPU_SETCW): Likewise.
This patches consolidates all the powerpc ceil{f} implementations on
the generic sysdeps/powerpc/fpu/s_ceil{f}. The generic implementation
uses either the compiler builts for ISA 2.03+ (which generates the frip
instruction) or a generic implementation which uses FP only operations.
It adds a generic implementation (round_to_integer.h) which is shared
with other rounding to integer routines. The resulting code should be
similar in term os performance to previous assembly one.
The IFUNC organization for powerpc64 is also change to be enabled only
for powerpc64 and not for powerpc64le (since minium ISA of 2.08 does not
require the fallback generic implementation).
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/powerpc/fpu/fenv_libc.h (__fesetround_inline_nocheck): New
function.
* sysdeps/powerpc/fpu/round_to_integer.h: New file.
* sysdeps/powerpc/fpu/s_ceil.c: Likewise.
* sysdeps/powerpc/fpu/s_ceilf.c: Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_ceil.S: Remove file.
* sysdeps/powerpc/powerpc32/fpu/s_ceilf.S: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/Makefile
(CFLAGS-s_ceil-power5+.c, CFLAGS-s_ceilf-power5+.c): New rule.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_ceil-power5+.S:
Remove file.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_ceil-ppc32.S:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_ceilf-power5+.S:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_ceilf-ppc32.S:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_ceil-power5+.c:
New file.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_ceil-ppc32.c:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_ceilf-power5+.c:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_ceilf-ppc32.c:
Likewise.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_ceil.S: Remove file.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_ceilf.S: Likewise.
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/Makefile: New file.
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_ceil-power5+.c:
Likewise.
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_ceil-ppc64.c:
Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_ceil.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_ceil.c: ... here.
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_ceilf-power5+.c: New
file.
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_ceilf-ppc64.c:
Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_ceilf.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_ceilf.c: ...
* here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile
(libm-sysdep_routines): Remove s_ceil-power5+, s_ceil-ppc64,
s_ceilf-power5+, and s_ceilf-ppc64.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_ceil-power5+.S: Remove
file.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_ceil-ppc64.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_ceilf-power5+.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_ceilf-ppc64.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_ceil.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_ceilf.S: Likewise.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_ceil.S: Likewise.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_ceilf.S: Likewise.
Reviewed-by: Gabriel F. T. Gomes <gabriel@inconstante.eti.br>
Replace inline asm uses of the "mffs" and "mtfsf" instructions with
the analogous GCC builtins.
__builtin_mffs and __builtin_mtfsf are both available in GCC 5 and above.
Given the minimum GCC level for GLibC is now GCC 6.2, it is safe to use
these builtins without restriction.
2019-03-29 Paul A. Clarke <pc@us.ibm.com>
* sysdeps/powerpc/fpu/fenv_libc.h (fegetenv_register): Replace inline
asm with builtin.
* sysdeps/powerpc/powerpc64/le/fpu/sfp-machine.h (FP_INIT_ROUNDMODE):
Likewise.
* sysdeps/powerpc/fpu/tst-setcontext-fpscr.c (_GET_DI_FPSCR): Likewise.
(_GET_SI_FPSCR): Likewise.
(_SET_SI_FPSCR): Likewise.
Continuing the fixes for C90 libm functions calling C99 fe* functions,
this patch fixes the case of fesetround by making it a weak alias of
__fesetround and making the affected code call __fesetround. An
existing __fesetround function in fenv_libc.h for powerpc is renamed
to __fesetround_inline.
Tested for x86_64 (testsuite, and that disassembly of installed shared
libraries is unchanged by the patch). Also tested for ARM
(soft-float) that fesetround failures disappear from the linknamespace
test results (feupdateenv remains to be addressed to complete fixing
bug 17748).
[BZ #17748]
* include/fenv.h (__fesetround): Declare. Use libm_hidden_proto.
* math/fesetround.c (fesetround): Rename to __fesetround and
define as weak alias of __fesetround. Use libm_hidden_weak.
* sysdeps/aarch64/fpu/fesetround.c (fesetround): Likewise.
* sysdeps/alpha/fpu/fesetround.c (fesetround): Likewise.
* sysdeps/arm/fesetround.c (fesetround): Likewise.
* sysdeps/hppa/fpu/fesetround.c (fesetround): Likewise.
* sysdeps/i386/fpu/fesetround.c (fesetround): Likewise.
* sysdeps/ia64/fpu/fesetround.c (fesetround): Likewise.
* sysdeps/m68k/fpu/fesetround.c (fesetround): Likewise.
* sysdeps/mips/fpu/fesetround.c (fesetround): Likewise.
* sysdeps/powerpc/fpu/fenv_libc.h (__fesetround): Rename to
__fesetround_inline.
* sysdeps/powerpc/fpu/fenv_private.h (libc_fesetround_ppc): Call
__fesetround_inline instead of __fesetround.
* sysdeps/powerpc/fpu/fesetround.c (fesetround): Rename to
__fesetround and define as weak alias of __fesetround. Use
libm_hidden_weak. Call __fesetround_inline instead of
__fesetround.
* sysdeps/powerpc/nofpu/fesetround.c (fesetround): Rename to
__fesetround and define as weak alias of __fesetround. Use
libm_hidden_weak.
* sysdeps/powerpc/powerpc32/e500/nofpu/fesetround.c (fesetround):
Likewise.
* sysdeps/s390/fpu/fesetround.c (fesetround): Likewise.
* sysdeps/sh/sh4/fpu/fesetround.c (fesetround): Likewise.
* sysdeps/sparc/fpu/fesetround.c (fesetround): Likewise.
* sysdeps/tile/math_private.h (__fesetround): New inline function.
* sysdeps/x86_64/fpu/fesetround.c (fesetround): Rename to
__fesetround and define as weak alias of __fesetround. Use
libm_hidden_weak.
* sysdeps/generic/math_private.h (default_libc_fesetround): Call
__fesetround instead of fesetround.
(default_libc_feholdexcept_setround): Likewise.
(libc_feholdsetround_ctx): Likewise.
(libc_feholdsetround_noex_ctx): Likewise.
The natural fix for some linknamespace test failures, where C90 libm
functions call C99 <fenv.h> functions, is to make fe* into weak
aliases for __fe* and call __fe* from within libm as needed.
To do this, the __fe* names need to be available for that purpose -
that is, they must not be used for something other than aliases of
fe*. On powerpc, however, __fegetround is an inline function in
fenv_libc.h, with no corresponding fegetround inline function;
fegetround has an equivalent macro expansion in bits/fenvinline.h, but
that is disabled if __NO_MATH_INLINES (which is defined for building
libm).
I see no need for that disabling; it's not even clear that
__NO_MATH_INLINES should affect <fenv.h>, and the results of
fegetround are completely defined so there is no semantic effect of
that disabling at all outside glibc. The x86 inline feraiseexcept is
conditioned on __USE_EXTERN_INLINES not __NO_MATH_INLINES (but that's
an inline function rather than a macro).
This patch removes the __NO_MATH_INLINES conditional on that
fegetround macro, so resulting in it being expanded inline inside
glibc. In turn, this means that direct calls to __fegetround from C99
functions in ldbl-128ibm can be changed to calls to fegetround, so
that nofpu fenv_libc.h files don't need to define __fegetround at all
and, by changing ldbl-128ibm files to use <fenv.h> not <fenv_libc.h>,
non-e500 nofpu no longer needs an fenv_libc.h file.
The other macros in fenvinline.h are left conditional on
__NO_MATH_INLINES, although since the only case where this should make
a difference is one involving undefined behavior (if the argument to
the function is not a valid exception macro).
The out-of-line definition for fegetround uses __fegetround (the
inline function removed by this patch). So this continues to work,
the fenvinline.h header is made to define __fegetround, and then to
define fegetround to call __fegetround.
Tested for powerpc32 (hard float) that installed stripped shared
libraries are unchanged by this patch; also tested that powerpc-nofpu
build still works. (This patch does not itself fix any bugs; it
simply cleans things up in preparation for separate bug fixes.)
* sysdeps/powerpc/bits/fenvinline.h (fegetround): Rename macro to
__fegetround and redefine to call __fegetround. Remove condition
on [!__NO_MATH_INLINES].
* sysdeps/powerpc/fpu/fenv_libc.h (__fegetround): Remove inline
function.
* sysdeps/powerpc/nofpu/fenv_libc.h: Remove file.
* sysdeps/powerpc/powerpc32/e500/nofpu/fenv_libc.h (__fegetround):
Remove macro.
* sysdeps/ieee754/ldbl-128ibm/s_llrintl.c: Include <fenv.h>
instead of <fenv_libc.h>.
(__llrintl): Call fegetround instead of __fegetround.
* sysdeps/ieee754/ldbl-128ibm/s_llroundl.c: Include <fenv.h>
instead of <fenv_libc.h>.
* sysdeps/ieee754/ldbl-128ibm/s_lrintl.c: Likewise.
(__lrintl): Call fegetround instead of __fegetround.
* sysdeps/ieee754/ldbl-128ibm/s_lroundl.c: Include <fenv.h>
instead of <fenv_libc.h>.
* sysdeps/ieee754/ldbl-128ibm/s_rintl.c: Likewise.
(__rintl): Call fegetround instead of __fegetround.
This patch optimizes the FPSCR update on exception and rounding change
functions by just updating its value if new value if different from
current one. It also optimizes fedisableexcept and feenableexcept by
removing an unecessary FPSCR read.
This patch helps some math functions performance by adding the libc_fexxx
variant of inline functions to handle both FPU round and exception set/restore
and by using them on the libc_fexxx_ctx functions. It is based on already coded
fexxx family functions for PPC with fpu.
Here is the summary of performance improvements due this patch (measured on a
POWER7 machine):
Before:
cos(): ITERS:9.5895e+07: TOTAL:5116.03Mcy, MAX:77.6cy, MIN:49.792cy, 18744 calls/Mcy
exp(): ITERS:2.827e+07: TOTAL:5187.15Mcy, MAX:494.018cy, MIN:38.422cy, 5450.01 calls/Mcy
pow(): ITERS:6.1705e+07: TOTAL:5144.26Mcy, MAX:171.95cy, MIN:29.935cy, 11994.9 calls/Mcy
sin(): ITERS:8.6898e+07: TOTAL:5117.06Mcy, MAX:83.841cy, MIN:46.582cy, 16982 calls/Mcy
tan(): ITERS:2.9473e+07: TOTAL:5115.39Mcy, MAX:191.017cy, MIN:172.352cy, 5761.63 calls/Mcy
After:
cos(): ITERS:2.05265e+08: TOTAL:5111.37Mcy, MAX:78.754cy, MIN:24.196cy, 40158.5 calls/Mcy
exp(): ITERS:3.341e+07: TOTAL:5170.84Mcy, MAX:476.317cy, MIN:15.574cy, 6461.23 calls/Mcy
pow(): ITERS:7.6153e+07: TOTAL:5129.1Mcy, MAX:147.5cy, MIN:30.916cy, 14847.2 calls/Mcy
sin(): ITERS:1.58816e+08: TOTAL:5115.11Mcy, MAX:1490.39cy, MIN:22.341cy, 31048.4 calls/Mcy
tan(): ITERS:3.4964e+07: TOTAL:5114.18Mcy, MAX:177.422cy, MIN:146.115cy, 6836.68 calls/Mcy
2008-11-13 Ryan S. Arnold <rsa@us.ibm.com>
[BZ #6411]
* sysdeps/powerpc/fpu/Makefile: Added test case tst-setcontext-fpscr.
* sysdeps/powerpc/fpu/feholdexcpt.c (_FPU_MASK_ALL): Define to replace
magic numbers.
* sysdeps/powerpc/fpu/fenv_libc.h (fesetenv_register): Dynamically
choose mtfsf insn based on PPC_FEATURE_HAS_DFP.
(relax_fenv_state): Same as above.
(FPSCR_29): Reserve bit in ISA 2.05.
(FPSCR_NI): Provide define for compat.
* sysdeps/powerpc/fpu/fesetenv.c (_FPU_MASK_ALL): Define to replace
magic numbers.
* sysdeps/powerpc/fpu/feupdateenv.c (_FPU_MASK_ALL): Define to replace
magic numbers.
* sysdeps/powerpc/fpu/tst-setcontext-fpscr.c: New file. Test case to
test setcontext and swapcontext with dynamic 64-bit FPSCR detection.
* sysdeps/powerpc/powerpc32/fpu/__longjmp-common.S (__longjmp): Adjust
access to hwcap to account for hwcap size increase to uint64_t.
* sysdeps/powerpc/powerpc32/fpu/setjmp-common.S (__sigsetjmp ):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/getcontext-common.S
(*setcontext): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/power6/fpu/setcontext.S:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/power6/fpu/swapcontext.S:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/setcontext-common.S
(*setcontext): dynamically select mtfsf insn based on
PPC_FEATURE_HAS_DFP. Adjust access to hwcap to account for hwcap size
increase to uint64_t.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/swapcontext-common.S
(*swapcontext): dynamically select mtfsf insn based on
PPC_FEATURE_HAS_DFP. Adjust access to hwcap to account for hwcap size
increase to uint64_t.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/power6/fpu/setcontext.S:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/power6/fpu/swapcontext.S:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/setcontext.S
(*setcontext): dynamically select mtfsf insn based on
PPC_FEATURE_HAS_DFP.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/swapcontext.S
(*swapcontext): dynamically select mtfsf insn based on
PPC_FEATURE_HAS_DFP.
__fe_nomask_env.
* sysdeps/powerpc/fpu/fe_nomask.c: Add libm_hidden_def.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/fe_nomask.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/fpu/fe_nomask.c: Likewise.
* sysdeps/powerpc/bits/fenv.h: Make safe for C++.
* sysdeps/unix/sysv/linux/powerpc/bits/mathinline.h: New file.
* sysdeps/powerpc/fpu/fegetexcept.c (__fegetexcept): Rename
function from fegetexcept and make old name weak alias.
* include/fenv.h: Declare __fegetexcept.
* sysdeps/powerpc/fpu/fedisblxcpt.c: Use __fegetexcept instead of
fegetexcept.
* sysdeps/powerpc/fpu/feenablxcpt.c: Likewise.
* sysdeps/powerpc/fpu/fraiseexcpt.c (__feraiseexcept): Avoid call
to fetestexcept.
* sysdeps/ieee754/ldbl-128ibm/s_log1pl.c (__log1pl): Use __frexpl
instead of frexpl to avoid local PLT.
* math/s_significandl.c (__significandl): Use __ilogbl instead of
ilogbl to avoid local PLT.
* sysdeps/ieee754/ldbl-128ibm/s_expm1l.c (__expm1l): Use __ldexpl
instead of ldexpl to avoid local PLT.
* sysdeps/ieee754/ldbl-128ibm/e_expl.c (__ieee754_expl): Use
__roundl not roundl to avoid local PLT.
* sysdeps/ieee754/ldbl-128/e_j0l.c: Use function names which avoid
local PLTs. Use __sincosl instead of separate sinl and cosl
calls.
* sysdeps/ieee754/ldbl-128/e_j1l.c: Likewise.
2001-07-06 Paul Eggert <eggert@twinsun.com>
* manual/argp.texi: Remove ignored LGPL copyright notice; it's
not appropriate for documentation anyway.
* manual/libc-texinfo.sh: "Library General Public License" ->
"Lesser General Public License".
2001-07-06 Andreas Jaeger <aj@suse.de>
* All files under GPL/LGPL version 2: Place under LGPL version
2.1.
