Commit Graph

305 Commits

Author SHA1 Message Date
Paul Eggert
581c785bf3 Update copyright dates with scripts/update-copyrights
I used these shell commands:

../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")

and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.

I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah.  I don't
know why I run into these diagnostics whereas others evidently do not.

remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
2022-01-01 11:40:24 -08:00
Sergey Bugaev
27ae52e4d1 testrun.sh: Add support for --tool=rpctrace
rpctrace(1) is a Hurd RPC tracer tool, which is used similar to how
strace(1) is used on GNU/Linux.

Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20210907133325.255690-6-bugaevc@gmail.com>
Acked-by: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2021-09-10 01:24:10 +02:00
Florian Weimer
8208be389b Install shared objects under their ABI names
Previously, the installed objects were named like libc-2.33.so,
and the ABI soname libc.so.6 was just a symbolic link.

The Makefile targets to install these symbolic links are no longer
needed after this, so they are removed with this commit.  The more
general $(make-link) command (which invokes scripts/rellns-sh) is
retained because other symbolic links are still needed.

Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@rehdat.com>
2021-06-28 08:33:57 +02:00
Adhemerval Zanella
47f24c21ee y2038: Add support for 64-bit time on legacy ABIs
A new build flag, _TIME_BITS, enables the usage of the newer 64-bit
time symbols for legacy ABI (where 32-bit time_t is default).  The 64
bit time support is only enabled if LFS (_FILE_OFFSET_BITS=64) is
also used.

Different than LFS support, the y2038 symbols are added only for the
required ABIs (armhf, csky, hppa, i386, m68k, microblaze, mips32,
mips64-n32, nios2, powerpc32, sparc32, s390-32, and sh).  The ABIs with
64-bit time support are unchanged, both for symbol and types
redirection.

On Linux the full 64-bit time support requires a minimum of kernel
version v5.1.  Otherwise, the 32-bit fallbacks are used and might
results in error with overflow return code (EOVERFLOW).

The i686-gnu does not yet support 64-bit time.

This patch exports following rediretions to support 64-bit time:

  * libc:
    adjtime
    adjtimex
    clock_adjtime
    clock_getres
    clock_gettime
    clock_nanosleep
    clock_settime
    cnd_timedwait
    ctime
    ctime_r
    difftime
    fstat
    fstatat
    futimens
    futimes
    futimesat
    getitimer
    getrusage
    gettimeofday
    gmtime
    gmtime_r
    localtime
    localtime_r
    lstat_time
    lutimes
    mktime
    msgctl
    mtx_timedlock
    nanosleep
    nanosleep
    ntp_gettime
    ntp_gettimex
    ppoll
    pselec
    pselect
    pthread_clockjoin_np
    pthread_cond_clockwait
    pthread_cond_timedwait
    pthread_mutex_clocklock
    pthread_mutex_timedlock
    pthread_rwlock_clockrdlock
    pthread_rwlock_clockwrlock
    pthread_rwlock_timedrdlock
    pthread_rwlock_timedwrlock
    pthread_timedjoin_np
    recvmmsg
    sched_rr_get_interval
    select
    sem_clockwait
    semctl
    semtimedop
    sem_timedwait
    setitimer
    settimeofday
    shmctl
    sigtimedwait
    stat
    thrd_sleep
    time
    timegm
    timerfd_gettime
    timerfd_settime
    timespec_get
    utime
    utimensat
    utimes
    utimes
    wait3
    wait4

  * librt:
    aio_suspend
    mq_timedreceive
    mq_timedsend
    timer_gettime
    timer_settime

  * libanl:
    gai_suspend

Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
2021-06-15 10:42:11 -03:00
Lucas A. M. Magalhaes
709e3709a0 testrun.sh: Improve --help message
The testrun.sh --help message was missing the "container" option.
Besides just adding the missing option I decide to rewrite it in the
same layout as other tools.

Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2021-05-25 10:14:19 +05:30
Paul Eggert
2b778ceb40 Update copyright dates with scripts/update-copyrights
I used these shell commands:

../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")

and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
2021-01-02 12:17:34 -08:00
Arjun Shankar
b3b0b6916a Set locale related environment variables in debugglibc.sh
Tests and binaries that use locale related functions need to run in the
correct locale environment when being debugged via debugglibc.sh.  This
commit sets up the environment, specifically: GCONV_PATH, LOCPATH, and
LC_ALL for such tests and binaries when they are being debugged outside
of a test container.

Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2020-09-24 14:58:36 +02:00
Carlos O'Donell
033362cfd7 test-container: Support $(complocaledir) and mkdirp.
Expand the support infrastructure:
- Create $(complocaledir) in the testroot.pristine to support localedef.
- Add the variable $complocaledir to script support.
- Add the script command 'mkdirp'.

All localedef tests which run with default paths need to have the
$(complocaledir) created in testroot.pristine. The localedef binary
will not by itself create the default path, but it will write into
the path. By adding this we can simplify the localedef tests.

The variable $complocaledir is the value of the configured
$(complocaledir) which is the location of the compiled locales that
will be searched by the runtime by default.

The command mkdirp will be available in script setup and will
be equivalent to running `mkdir -p`.

The variable and command can be used to write more complex tests.

Reviewed-by: DJ Delorie <dj@redhat.com>
2020-04-30 16:28:07 -04:00
Siddhesh Poyarekar
97ff54d2fc Drop dependency of dist target on ChangeLog
We no longer write manual ChangeLog entries since they are
auto-generated at release time.  Drop dependency of the `make dist`
target on the file and document the fact that the latest ChangeLog
entries can be read in the highest numbered ChangeLog.N file in
ChangeLog.old.

The ChangeLog.old/ChangeLog.20 file for 2.31 will thus be generated
just before tagging a release.

Reviewed-by: Paul Eggert <eggert@cs.ucla.edu>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
2020-01-09 13:28:08 +05:30
Joseph Myers
d614a75396 Update copyright dates with scripts/update-copyrights. 2020-01-01 00:14:33 +00:00
Gabriel F. T. Gomes
d0bc5b725d Do not use ld.so to open statically linked programs in debugglibc.sh
Debugging programs that have been dynamically linked against an
uninstalled glibc requires unusual steps, such as letting gdb know where
the thread db library is located and explicitly calling the loader.
However, when the program under test is statically linked, these steps
are not required (as a matter of fact, using the dynamic loader to run a
statically linked program is wrong and will fail), and gdb should be
called the usual way.

This patch modifies debugglibc.sh so that it checks if the program under
test is statically linked, then runs the debugger appropriately.

Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2019-12-04 09:17:06 -03:00
Gabriel F. T. Gomes
6ef1bab699 Attach to test in container from debugglibc.sh
Some test cases are meant to be ran inside the container infrastructure
and make check automatically runs them as such.  However, running a
single test case in a container without make check is useful.

This patch adds a new --tool option to testrun.sh that makes this easy,
as well as it adds a new option (-c or --in-container) to debugglibc.sh,
which causes the program under test to be ran in a container (with
WAIT_FOR_DEBUGGER=1), then automatically attaches GDB to it.

Automatically detecting if a test case is supposed to be ran inside a
container is harder (if not impossible), as Carlos pointed out [1],
however, this patch makes it easier to do it manually:

  Using testrun.sh with containerized test:

    $ ./testrun.sh --tool=container /absolute/path/to/program

  Using debugglibc.sh with containerized test:

    $ ./debugglibc.sh -c /absolute/path/to/program

Note: running these commands with relative paths causes error and
warning messages to be displayed, although the test case might succeed.

For example, with relative path:

  $ ./testrun.sh --tool=container elf/tst-ldconfig-bad-aux-cache
  error: subprocess failed: execv
  error:   unexpected error output from subprocess
  /sbin/ldconfig: Warning: ignoring configuration file that cannot be opened: /etc/ld.so.conf: No such file or directory
  info: f    0    1064   /var/cache/ldconfig/aux-cache            20 aux-cache
  [...]

Whereas with absolute paths, the errors and warnings are gone:

  $ ./testrun.sh --tool=container $PWD/elf/tst-ldconfig-bad-aux-cache
  info: f    0    1064   /var/cache/ldconfig/aux-cache            20 aux-cache
  [...]

[1] https://sourceware.org/ml/libc-alpha/2019-11/msg00873.html

Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2019-12-04 09:16:42 -03:00
Arjun Shankar
81a1fa6cbf Fix run-one-test so that it runs elf tests
The `test' make target passes a trailing slash in the subdir argument.  This
does not play well with elf/rtld-Rules which looks for `elf' without any
trailing slash, and therefore doesn't find a match when running an elf test
individually.  This commit removes the trailing slash from the invocation.

Reviewed-by: DJ Delorie <dj@redhat.com>
2019-11-05 17:45:07 +01:00
DJ Delorie
97476447ed Install charmaps uncompressed in testroot
The testroot does not have a gunzip command, so the charmap files
should not be installed gzipped else they cannot be used (and thus
tested).  With this patch, installing with INSTALL_UNCOMPRESSED=yes
installs uncompressed charmaps instead.

Note that we must purge the $(symbolic_link_list) as it contains
references to $(DESTDIR), which we change during the testroot
installation.

Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2019-10-24 17:01:04 -04:00
Joseph Myers
7db1fe38de Fix testroot.pristine creation copying dynamic linker.
This patch addresses an issue reported in
<https://sourceware.org/ml/libc-alpha/2019-07/msg00661.html> where the
creation of testroot.pristine, on encountering
LD_TRACE_LOADED_OBJECTS=1 of the form

        libc.so.6 => /scratch/jmyers/glibc/mbs/obj/glibc-8-0-mips64-linux-gnu-x86_64-linux-gnu/default/libc.so.6 (0x772dd000)
        /lib32/ld.so.1 => /scratch/jmyers/glibc/mbs/obj/glibc-8-0-mips64-linux-gnu-x86_64-linux-gnu/default/elf/ld.so.1 (0x7747b000)

tries to copy /lib32/ld.so.1 (which does not exist) into the testroot
instead of copying the path on the RHS of "=>", which does exist,
because the Makefile logic assumes that the path on such a line with
'/' should be copied, when if there are such paths on both the LHS and
the RHS of "=>", only the one on the RHS necessarily exists and so
only that should be copied.  The patch follows the approach suggested
by DJ in <https://sourceware.org/ml/libc-alpha/2019-07/msg00662.html>,
with the suggestion from Andreas in
<https://sourceware.org/ml/libc-alpha/2019-10/msg00514.html> of a
single sed command in place of pipeline of grep and three sed
commands.

Tested for x86_64, with and without --enable-hardcoded-path-in-tests;
a previous version with multiple sed commands, implementing the same
logic, also tested for MIPS, with and without
--enable-hardcoded-path-in-tests, to confirm it fixes the original
problem.

Co-authored-by: DJ Delorie <dj@redhat.com>
2019-10-22 20:24:10 +00:00
DJ Delorie
2ac579f9c2 Add run-one-test convenience target and makefile help text
Adds "make test" for re-running just one test.  Also adds
"make help" for help with our Makefile targets, and adds a
mini-help when you just run "make".

Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2019-10-18 15:46:04 -04:00
Arjun Shankar
21417aaa88 Enable passing arguments to the inferior in debugglibc.sh
This patch adds the ability to run debugglibc.sh's inferior program with
arguments specified on the command line. This enables convenient debugging
of non-testcase programs such as iconv/iconv_prog or other dynamically
linked programs. Program arguments may be passed using `--' as a separator.

For example:

  $ ./debugglibc.sh -b iconv -- iconv/iconv_prog -f ASCII -t UTF-8 input.txt
2019-10-02 14:01:24 +02:00
Gabriel F. T. Gomes
79ced5a893 Add helper script for glibc debugging
This patch adds a new make rule that generates a helper script for
debugging glibc test cases.  The new script, debugglibc.sh, is similar
to testrun.sh, in the sense that it allows the execution of the
specified test case, however, it opens the test case in GDB, setting the
library path the same way that testrun.sh does.  The commands are based
on the instructions on the wiki for glibc debugging [1,2].

By default, the script tells GDB to load the test case for symbol
information, so that, when a breakpoint is hit, the call stack is
displayed correctly (instead of printing lots of '??'s).  For instance,
after running 'make' and 'make check', one could do the following:

  $ ./debugglibc.sh nptl/tst-exec1 -b pthread_join

  Reading symbols from /home/gabriel/build/powerpc64le/glibc//elf/ld.so...done.
  Breakpoint 1 at 0x1444
  add symbol table from file "nptl/tst-exec1"
  [Thread debugging using libthread_db enabled]
  Using host libthread_db library "/home/gabriel/build/powerpc64le/glibc//nptl_db/libthread_db.so.1".

  Breakpoint 1, 0x00007ffff7fb1444 in _dl_start_user () from /home/gabriel/build/powerpc64le/glibc/elf/ld.so
  Breakpoint 2 at 0x7ffff7f49d48: file pthread_join.c, line 23.

Notice that the script will always start GDB with the program running
and halted at _dl_start_user.  So, in order to reach the actual
breakpoint of interest, one should hit 'c', not 'r':

  >>> c
  Continuing.
  [New Thread 0x7ffff7d1f180 (LWP 76443)]
  [Switching to Thread 0x7ffff7d1f180 (LWP 76443)]

  Thread 2 "ld.so" hit Breakpoint 2, __pthread_join (threadid=140737354087616, thread_return=0x0) at pthread_join.c:24
  24        return __pthread_timedjoin_ex (threadid, thread_return, NULL, true);

Then inspect the call stack with 'bt', as usual, and see symbols from
both the test case and from the libraries themselves:

  >>> bt
  #0  __pthread_join (threadid=140737354087616, thread_return=0x0) at pthread_join.c:24
  #1  0x0000000010001f4c in tf (arg=<optimized out>) at tst-exec1.c:37
  #2  0x00007ffff7f487e8 in start_thread (arg=0x7ffff7510000) at pthread_create.c:479
  #3  0x00007ffff7e523a8 in clone () at ../sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S:82

Tested for powerpc64le and x86_64.

[1] https://sourceware.org/glibc/wiki/Debugging/Loader_Debugging
[2] https://sourceware.org/glibc/wiki/Testing/Builds#Required_gdb_setup

Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Dmitry V. Levin <ldv@altlinux.org>
Reviewed-by: Joseph Myers <joseph@codesourcery.com>
Reviewed-by: Andreas Schwab <schwab@suse.de>
2019-09-30 08:37:18 -03:00
Paul Eggert
5a82c74822 Prefer https to http for gnu.org and fsf.org URLs
Also, change sources.redhat.com to sourceware.org.
This patch was automatically generated by running the following shell
script, which uses GNU sed, and which avoids modifying files imported
from upstream:

sed -ri '
  s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g
  s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g
' \
  $(find $(git ls-files) -prune -type f \
      ! -name '*.po' \
      ! -name 'ChangeLog*' \
      ! -path COPYING ! -path COPYING.LIB \
      ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \
      ! -path manual/texinfo.tex ! -path scripts/config.guess \
      ! -path scripts/config.sub ! -path scripts/install-sh \
      ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \
      ! -path INSTALL ! -path  locale/programs/charmap-kw.h \
      ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \
      ! '(' -name configure \
            -execdir test -f configure.ac -o -f configure.in ';' ')' \
      ! '(' -name preconfigure \
            -execdir test -f preconfigure.ac ';' ')' \
      -print)

and then by running 'make dist-prepare' to regenerate files built
from the altered files, and then executing the following to cleanup:

  chmod a+x sysdeps/unix/sysv/linux/riscv/configure
  # Omit irrelevant whitespace and comment-only changes,
  # perhaps from a slightly-different Autoconf version.
  git checkout -f \
    sysdeps/csky/configure \
    sysdeps/hppa/configure \
    sysdeps/riscv/configure \
    sysdeps/unix/sysv/linux/csky/configure
  # Omit changes that caused a pre-commit check to fail like this:
  # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines
  git checkout -f \
    sysdeps/powerpc/powerpc64/ppc-mcount.S \
    sysdeps/unix/sysv/linux/s390/s390-64/syscall.S
  # Omit change that caused a pre-commit check to fail like this:
  # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline
  git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
2019-09-07 02:43:31 -07:00
Tulio Magno Quites Machado Filho
354e4c1add test-container: Install with $(sorted-subdirs) [BZ #24794]
Commit 35e038c1d2 started to use an
incomplete list of subdirs based on $(all-subdirs) causing
testroot.pristine to miss files from nss.

Tested if the list of files in testroot.pristine remains the same.

	[BZ #24794]
	* Makeconfig (all-subdirs): Improved source comments.
	* Makefile (testroot.pristine/install.stamp): Pass
	subdirs='$(sorted-subdirs)' to make install.
2019-07-29 10:31:06 -03:00
Tulio Magno Quites Machado Filho
35e038c1d2 test-container: Install with $(all-subdirs) [BZ #24794]
Whenever a sub-make is created, it inherits the variable subdirs from its
parent.  This is also true when make check is called with a restricted
list of subdirs.  In this scenario, make install is executed "partially"
and testroot.pristine ends up with an incomplete installation.

	[BZ #24794]
	* Makefile (testroot.pristine/install.stamp): Pass
	subdirs='$(all-subdirs)' to make install.

Reviewed-by: DJ Delorie <dj@redhat.com>
2019-07-23 10:14:26 -03:00
Tulio Magno Quites Machado Filho
95da14dac0 test-container: Avoid copying unintended system libraries
Some DSOs are distributed in hardware capability directories, e.g.
/usr/lib64/power7/libc.so.6
Whenever the processor is able to use one of these hardware-enabled
DSOs, testroot.pristine ends up with copies of glibc-provided libraries
from the system because it can't overwrite or remove them.

This patch avoids the unintended copies by executing ld.so with the same
arguments passed to each glibc test.

	* Makefile (testroot.pristine/install.stamp): Execute ld.so with
	the same arguments used in all tests.
2019-07-23 10:04:01 -03:00
Florian Weimer
ad18dadec9 Add check for missing wrapper headers
If building on a subset of architectures only, it is easy to miss
wrapper headers which are required by other architectures because
they lack the corresponding sysdeps header.  The check ensures
that every installed header which is not itself a sysdeps header
has a header under include/ (that presumably wraps the header,
and perhaps also adding declarations and definitions for !_ISOMAC).

Also check for the absence of the sysdeps/generic/bits directory
removed in commit c72565e5f1, to make
accidental re-introduction more difficult.

Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2019-02-16 08:25:16 +01:00
Matthew Malcomson
5e10136b3c testrun.sh: Exit in case of incorrect argument 2019-02-04 13:06:15 +01:00
Joseph Myers
04277e02d7 Update copyright dates with scripts/update-copyrights.
* All files with FSF copyright notices: Update copyright dates
	using scripts/update-copyrights.
	* locale/programs/charmap-kw.h: Regenerated.
	* locale/programs/locfile-kw.h: Likewise.
2019-01-01 00:11:28 +00:00
Joseph Myers
bd598da9f4 Stop test-in-container trying to run other-OS binaries.
I noticed that, now that build-many-glibcs.py no longer copies glibc
sources, I was getting core dumps in my glibc source directories.  The
cause appears to be, from the i686-gnu build:

for dso in ` env LD_TRACE_LOADED_OBJECTS=1  \
        /scratch/jmyers/glibc-bot/build/glibcs/i686-gnu/glibc/elf/ld.so.1 \
        /scratch/jmyers/glibc-bot/build/glibcs/i686-gnu/glibc/testroot.pristine/bin/sh \
[...]
Segmentation fault (core dumped)

In this case, the x86 architecture means the binary executes, but
dumps core rather than actually working.

Anything involving running the newly built glibc should only be done
ifeq ($(run-built-tests),yes).  This patch conditions the relevant
part of the testroot setup accordingly.

Tested for x86_64, and with build-many-glibcs.py for i686-gnu.

	* Makefile ($(objpfx)testroot.pristine/install.stamp): Do not run
	dynamic linker unless [$(run-built-tests) = yes].
2018-12-04 16:52:39 +00:00
Andreas Schwab
4634128642 Remove leading space from testrun.sh 2018-09-26 10:13:13 +02:00
DJ Delorie
561b0bec44 Add test-in-container infrastructure.
* Makefile (testroot.pristine): New rules to initialize the
test-in-container "testroot".
* Makerules (all-testsuite): Add tests-container.
* Rules (tests-expected): Add tests-container.
(binaries-all-tests): Likewise.
(tests-container): New, run these tests in the testroot container.
* support/Makefile (others): Add *-container, support_paths.c,
xmkdirp, and links-dso-program.
* support/links-dso-program-c.c: New.
* support/links-dso-program.cc: New.
* support/test-container.c: New.
* support/shell-container.c: New.
* support/echo-container.c: New.
* support/true-container.c: New.
* support/xmkdirp.c: New.
* support/xsymlink.c: New.
* support/support_paths.c: New.
* support/support.h: Add support paths prototypes.
* support/xunistd.h: Add xmkdirp () and xsymlink ().

* nss/tst-nss-test3.c: Convert to test-in-container.
* nss/tst-nss-test3.root/: New.
2018-08-22 21:20:37 -04:00
Florian Weimer
f2873d2da0 testrun.sh: Implement --tool=strace, --tool=valgrind
$(file …) appears to be the only convenient way to create files
with newlines and make substitution variables.  This needs make 4.0
(released in 2013), so update the requirement to match.

Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2018-07-04 15:30:45 +02:00
Joseph Myers
688903eb3e Update copyright dates with scripts/update-copyrights.
* All files with FSF copyright notices: Update copyright dates
	using scripts/update-copyrights.
	* locale/programs/charmap-kw.h: Regenerated.
	* locale/programs/locfile-kw.h: Likewise.
2018-01-01 00:32:25 +00:00
Joseph Myers
644d38570a Remove add-ons mechanism.
glibc has an add-ons mechanism to allow additional software to be
integrated into the glibc build.  Such add-ons may be within the glibc
source tree, or outside it at a path passed to the --enable-add-ons
configure option.

localedata and crypt were once add-ons, distributed in separate
release tarballs, but long since stopped using that mechanism.
Linuxthreads was always an add-on.  Ports spent some time as an add-on
with separate release tarballs, then was first moved into the glibc
source tree, then had its sysdeps files moved into the main sysdeps
hierarchy so the add-ons mechanism was no longer used.  NPTL spent
some time as an add-on in the main glibc tree before stopping using
the add-on mechanism.  libidn used to have separate release tarballs
but no longer does so, but still uses the add-ons mechanism within the
glibc source tree.  Various other software has supported building with
the add-ons mechanism at times in the past, but I don't think any is
still widely used.

Add-ons involve significant, little-used complexity in the glibc build
system, and make it hard to understand what the space of possible
glibc configurations is.  This patch removes the add-ons mechanism.
libidn is now built via the Subdirs mechanism to cause any
configuration using sysdeps/unix/inet to build libidn; HAVE_LIBIDN
(which effectively means shared libraries are available) is now
defined via sysdeps/unix/inet/configure.  Various references to
add-ons around the source tree are removed (in the case of maint.texi,
the example list of sysdeps directories is still very out of date).

Externally maintained ports should now put their files in the normal
sysdeps directory structure rather than being arranged as add-ons;
they probably need to change e.g. elf.h anyway, rather than actually
being able to work just as a drop-in subtree.  Hurd libpthread should
be arranged similarly to NPTL, so some files might go in a
hurd-pthreads (or similar) top-level directory in glibc, while sysdeps
files should go in the normal sysdeps directory structure (possibly in
hurd or hurd-pthreads subdirectories, just as there are nptl
subdirectories in the sysdeps tree).

Tested for x86_64, and with build-many-glibcs.py.

	* configure.ac (--enable-add-ons): Remove option.
	(machine): Do not mention add-ons in comment.
	(LIBC_PRECONFIGURE): Likewise.
	(add_ons): Remove variable and sanity checks and logic to locate
	add-ons.
	(add_ons_automatic): Remove variable.
	(configured_add_ons): Likewise.
	(add_ons_sfx): Likewise.
	(add_ons_pfx): Likewise.
	(add_on_subdirs): Likewise.
	(sysnames_add_ons): Likewise.  Remove loop over add-ons and
	consideration of add-ons in Implies handling.
	(sysdeps_add_ons): Likewise.
	* configure: Regenerated.
	* libidn/configure.ac: Remove.
	* libidn/configure: Likewise.
	* sysdeps/unix/inet/configure.ac: New file.
	* sysdeps/unix/inet/configure: New generated file.
	* sysdeps/unix/inet/Subdirs: Add libidn.
	* Makeconfig (sysdeps-srcdirs): Remove variable.
	(+sysdep_dirs): Do not include $(sysdeps-srcdirs).
	($(common-objpfx)config.status): Do not depend on add-on files.
	($(common-objpfx)shlib-versions.v.i): Do not mention add-ons in
	comment.
	(all-subdirs): Do not include $(add-on-subdirs).
	* Makefile (dist-prepare): Do not use $(sysdeps-add-ons).
	* config.make.in (add-ons): Remove variable.
	(add-on-subdirs): Likewise.
	(sysdeps-add-ons): Likewise.
	* manual/Makefile (add-chapters): Remove.
	($(objpfx)texis): Do not depend on $(add-chapters).
	(nonexamples): Do not handle $(add-chapters).
	(examples): Do not handle $(add-ons).
	(chapters.% top-menu.%): Do not pass '$(add-chapters)' to
	libc-texinfo.sh.
	* manual/install.texi (Installation): Do not mention add-ons.
	(--enable-add-ons): Do not document configure option.
	* INSTALL: Regenerated.
	* manual/libc-texinfo.sh: Do not handle $2 add-ons argument.
	* manual/maint.texi (Hierarchy Conventions): Do not mention
	add-ons.
	* scripts/build-many-glibcs.py (Glibc.build_glibc): Do not use
	--enable-add-ons.
	* scripts/gen-sorted.awk: Do not handle Subdirs files from
	add-ons.
	* scripts/test-installation.pl: Do not handle glibc-compat add-on.
	* sysdeps/nptl/Makeconfig: Do not mention add-ons in comment.
2017-10-05 15:58:13 +00:00
Zack Weinberg
7c3018f9e4 Suppress internal declarations for most of the testsuite.
This patch adds a new build module called 'testsuite'.
IS_IN (testsuite) implies _ISOMAC, as do IS_IN_build and __cplusplus
(which means several ad-hoc tests for __cplusplus can go away).
libc-symbols.h now suppresses almost all of *itself* when _ISOMAC is
defined; in particular, _ISOMAC mode does not get config.h
automatically anymore.

There are still quite a few tests that need to see internal gunk of
one variety or another.  For them, we now have 'tests-internal' and
'test-internal-extras'; files in this category will still be compiled
with MODULE_NAME=nonlib, and everything proceeds as it always has.
The bulk of this patch is moving tests from 'tests' to
'tests-internal'.  There is also 'tests-static-internal', which has
the same effect on files in 'tests-static', and 'modules-names-tests',
which has the *inverse* effect on files in 'modules-names' (it's
inverted because most of the things in modules-names are *not* tests).
For both of these, the file must appear in *both* the new variable and
the old one.

There is also now a special case for when libc-symbols.h is included
without MODULE_NAME being defined at all.  (This happens during the
creation of libc-modules.h, and also when preprocessing Versions
files.)  When this happens, IS_IN is set to be always false and
_ISOMAC is *not* defined, which was the status quo, but now it's
explicit.

The remaining changes to C source files in this patch seemed likely to
cause problems in the absence of the main change.  They should be
relatively self-explanatory.  In a few cases I duplicated a definition
from an internal header rather than move the test to tests-internal;
this was a judgement call each time and I'm happy to change those
however reviewers feel is more appropriate.

	* Makerules: New subdir configuration variables 'tests-internal'
	and 'test-internal-extras'.  Test files in these categories will
	still be compiled with MODULE_NAME=nonlib.  Test files in the
	existing categories (tests, xtests, test-srcs, test-extras) are
	now compiled with MODULE_NAME=testsuite.
	New subdir configuration variable 'modules-names-tests'.  Files
	which are in both 'modules-names' and 'modules-names-tests' will
	be compiled with MODULE_NAME=testsuite instead of
	MODULE_NAME=extramodules.
	(gen-as-const-headers): Move to tests-internal.
	(do-tests-clean, common-mostlyclean): Support tests-internal.
	* Makeconfig (built-modules): Add testsuite.
	* Makefile: Change libof-check-installed-headers-c and
	libof-check-installed-headers-cxx to 'testsuite'.
	* Rules: Likewise.  Support tests-internal.
	* benchtests/strcoll-inputs/filelist#en_US.UTF-8:
	Remove extra-modules.mk.

	* config.h.in: Don't check for __OPTIMIZE__ or __FAST_MATH__ here.
	* include/libc-symbols.h: Move definitions of _GNU_SOURCE,
	PASTE_NAME, PASTE_NAME1, IN_MODULE, IS_IN, and IS_IN_LIB to the
	very top of the file and rationalize their order.
	If MODULE_NAME is not defined at all, define IS_IN to always be
	false, and don't define _ISOMAC.
	If any of IS_IN (testsuite), IS_IN_build, or __cplusplus are
	true, define _ISOMAC and suppress everything else in this file,
	starting with the inclusion of config.h.
	Do check for inappropriate definitions of __OPTIMIZE__ and
	__FAST_MATH__ here, but only if _ISOMAC is not defined.
        Correct some out-of-date commentary.

	* include/math.h: If _ISOMAC is defined, undefine NO_LONG_DOUBLE
	and _Mlong_double_ before including math.h.
	* include/string.h: If _ISOMAC is defined, don't expose
	_STRING_ARCH_unaligned. Move a comment to a more appropriate
	location.

	* include/errno.h, include/stdio.h, include/stdlib.h, include/string.h
	* include/time.h, include/unistd.h, include/wchar.h: No need to
	check __cplusplus nor use __BEGIN_DECLS/__END_DECLS.

	* misc/sys/cdefs.h (__NTHNL): New macro.
	* sysdeps/m68k/m680x0/fpu/bits/mathinline.h
	(__m81_defun): Use __NTHNL to avoid errors with GCC 6.

	* elf/tst-env-setuid-tunables.c: Include config.h with _LIBC
	defined, for HAVE_TUNABLES.
	* inet/tst-checks-posix.c: No need to define _ISOMAC.
	* intl/tst-gettext2.c: Provide own definition of N_.
	* math/test-signgam-finite-c99.c: No need to define _ISOMAC.
	* math/test-signgam-main.c: No need to define _ISOMAC.
	* stdlib/tst-strtod.c: Convert to test-driver. Split locale_test to...
	* stdlib/tst-strtod1i.c: ...this new file.
	* stdlib/tst-strtod5.c: Convert to test-driver and add copyright notice.
        Split tests of __strtod_internal to...
	* stdlib/tst-strtod5i.c: ...this new file.
	* string/test-string.h: Include stdint.h. Duplicate definition of
	inhibit_loop_to_libcall here (from libc-symbols.h).
	* string/test-strstr.c: Provide dummy definition of
	libc_hidden_builtin_def when including strstr.c.
	* sysdeps/ia64/fpu/libm-symbols.h: Suppress entire file in _ISOMAC
	mode; no need to test __STRICT_ANSI__ nor __cplusplus as well.
	* sysdeps/x86_64/fpu/math-tests-arch.h: Include cpu-features.h.
	Don't include init-arch.h.
	* sysdeps/x86_64/multiarch/test-multiarch.h: Include cpu-features.h.
	Don't include init-arch.h.

	* elf/Makefile: Move tst-ptrguard1-static, tst-stackguard1-static,
	tst-tls1-static, tst-tls2-static, tst-tls3-static, loadtest,
	unload, unload2, circleload1, neededtest, neededtest2,
	neededtest3, neededtest4, tst-tls1, tst-tls2, tst-tls3,
	tst-tls6, tst-tls7, tst-tls8, tst-dlmopen2, tst-ptrguard1,
	tst-stackguard1, tst-_dl_addr_inside_object, and all of the
	ifunc tests to tests-internal.
	Don't add $(modules-names) to test-extras.
	* inet/Makefile: Move tst-inet6_scopeid_pton to tests-internal.
	Add tst-deadline to tests-static-internal.
	* malloc/Makefile: Move tst-mallocstate and tst-scratch_buffer to
	tests-internal.
	* misc/Makefile: Move tst-atomic and tst-atomic-long to tests-internal.
	* nptl/Makefile: Move tst-typesizes, tst-rwlock19, tst-sem11,
	tst-sem12, tst-sem13, tst-barrier5, tst-signal7, tst-tls3,
	tst-tls3-malloc, tst-tls5, tst-stackguard1, tst-sem11-static,
	tst-sem12-static, and tst-stackguard1-static to tests-internal.
        Link tests-internal with libpthread also.
	Don't add $(modules-names) to test-extras.
	* nss/Makefile: Move tst-field to tests-internal.
	* posix/Makefile: Move bug-regex5, bug-regex20, bug-regex33,
	tst-rfc3484, tst-rfc3484-2, and tst-rfc3484-3 to tests-internal.
	* stdlib/Makefile: Move tst-strtod1i, tst-strtod3, tst-strtod4,
	tst-strtod5i, tst-tls-atexit, and tst-tls-atexit-nodelete to
	tests-internal.
        * sunrpc/Makefile: Move tst-svc_register to tests-internal.
	* sysdeps/powerpc/Makefile: Move test-get_hwcap and
	test-get_hwcap-static to tests-internal.
	* sysdeps/unix/sysv/linux/Makefile: Move tst-setgetname to
	tests-internal.
	* sysdeps/x86_64/fpu/Makefile: Add all libmvec test modules to
	modules-names-tests.
2017-05-11 19:27:59 -04:00
Joseph Myers
2072f5c34e Remove C++ namespace handling from glibc headers.
glibc headers include some code (not particularly consistent or
systematic) to put various declarations in C++ namespaces std and
__c99, if _GLIBCPP_USE_NAMESPACES is defined.

As noted in <https://gcc.gnu.org/ml/libstdc++/2017-03/msg00025.html>,
this macro was removed from libstdc++ in 2000.  I don't expect
compilation with such old versions of libstdc++ to work with current
glibc headers anyway (whereas old *binaries* are expected to stay
working with current glibc); this patch (which should be a no-op with
any libstdc++ version postdating that removal) removes all this code
from the glibc headers.

The begin-end-check.pl test, whose comments say it is about checking
these namespace macro calls, is also removed.  The code in that test
would have covered __BEGIN_DECLS / __END_DECLS as well, but if those
weren't properly matched it would show up with the
check-installed-headers-cxx tests, so I don't think there is an actual
use for keeping begin-end-check.pl with the namespace code removed.

Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).

	* misc/sys/cdefs.h (__BEGIN_NAMESPACE_STD): Remove macro.
	(__END_NAMESPACE_STD): Likewise.
	(__USING_NAMESPACE_STD): Likewise.
	(__BEGIN_NAMESPACE_C99): Likewise.
	(__END_NAMESPACE_C99): Likewise.
	(__USING_NAMESPACE_C99): Likewise.
	* math/math.h (_Mdouble_BEGIN_NAMESPACE): Do not define and
	undefine macro.
	(_Mdouble_END_NAMESPACE): Likewise.
	* ctype/ctype.h: Do not handle C++ namespaces.
	* libio/bits/stdio-ldbl.h: Likewise.
	* libio/stdio.h: Likewise.
	* locale/locale.h: Likewise.
	* math/bits/mathcalls.h: Likewise.
	* setjmp/setjmp.h: Likewise.
	* signal/signal.h: Likewise.
	* stdlib/bits/stdlib-float.h: Likewise.
	* stdlib/bits/stdlib-ldbl.h: Likewise.
	* stdlib/stdlib.h: Likewise.
	* string/string.h: Likewise.
	* sysdeps/x86/fpu/bits/mathinline.h: Likewise.
	* time/bits/types/clock_t.h: Likewise.
	* time/bits/types/struct_tm.h: Likewise.
	* time/bits/types/time_t.h: Likewise.
	* time/time.h: Likewise.
	* wcsmbs/bits/wchar-ldbl.h: Likewise.
	* wcsmbs/uchar.h: Likewise.
	* wcsmbs/wchar.h: Likewise.
	[_GLIBCPP_USE_NAMESPACES] (wint_t): Remove conditional definition.
	* wctype/wctype.h: Do not handle C++ namespaces.
	* scripts/begin-end-check.pl: Remove.
	* Makefile (installed-headers): Likewise.
	(tests-special): Do not add $(objpfx)begin-end-check.out.
	($(objpfx)begin-end-check.out): Remove.
2017-03-16 13:31:57 +00:00
Joseph Myers
bfff8b1bec Update copyright dates with scripts/update-copyrights. 2017-01-01 00:14:16 +00:00
Zack Weinberg
4775578486 Installed header hygiene (BZ#20366): Test of installed headers.
This adds a test to ensure that the problems fixed in the last several
patches do not recur.  Each directory checks the headers that it
installs for two properties: first, each header must be compilable in
isolation, as both C and C++, under a representative combination of
language and library conformance levels; second, there is a blacklist
of identifiers that may not appear in any installed header, currently
consisting of the legacy BSD typedefs.  (There is an exemption for the
headers that define those typedefs, and for the RPC headers.  It may be
necessary to make this more sophisticated if we add more stuff to the
blacklist in the future.)

In order for this test to work correctly, every wrapper header
that actually defines something must guard those definitions with
 #ifndef _ISOMAC.  This is the existing mechanism used by the conform/
tests to tell wrapper headers not to define anything that the public
header wouldn't, and not to use anything from libc-symbols.h.  conform/
only cares for headers that we need to check for standards conformance,
whereas this test applies to *every* header.  (Headers in include/ that
are either installed directly, or are internal-use-only and do *not*
correspond to any installed header, are not affected.)

	* scripts/check-installed-headers.sh: New script.
	* Rules: In each directory that defines header files to be installed,
	run check-installed-headers.sh on them as a special test.
	* Makefile: Likewise for the headers installed at top level.

	* include/aliases.h, include/alloca.h, include/argz.h
	* include/arpa/nameser.h, include/arpa/nameser_compat.h
	* include/elf.h, include/envz.h, include/err.h
	* include/execinfo.h, include/fpu_control.h, include/getopt.h
	* include/gshadow.h, include/ifaddrs.h, include/libintl.h
	* include/link.h, include/malloc.h, include/mcheck.h
	* include/mntent.h, include/netinet/ether.h
	* include/nss.h, include/obstack.h, include/printf.h
	* include/pty.h, include/resolv.h, include/rpc/auth.h
	* include/rpc/auth_des.h, include/rpc/auth_unix.h
	* include/rpc/clnt.h, include/rpc/des_crypt.h
	* include/rpc/key_prot.h, include/rpc/netdb.h
	* include/rpc/pmap_clnt.h, include/rpc/pmap_prot.h
	* include/rpc/pmap_rmt.h, include/rpc/rpc.h
	* include/rpc/rpc_msg.h, include/rpc/svc.h
	* include/rpc/svc_auth.h, include/rpc/xdr.h
	* include/rpcsvc/nis_callback.h, include/rpcsvc/nislib.h
	* include/rpcsvc/yp.h, include/rpcsvc/ypclnt.h
	* include/rpcsvc/ypupd.h, include/shadow.h
	* include/stdio_ext.h, include/sys/epoll.h
	* include/sys/file.h, include/sys/gmon.h, include/sys/ioctl.h
	* include/sys/prctl.h, include/sys/profil.h
	* include/sys/statfs.h, include/sys/sysctl.h
	* include/sys/sysinfo.h, include/ttyent.h, include/utmp.h
	* sysdeps/arm/nacl/include/bits/setjmp.h
	* sysdeps/mips/include/sys/asm.h
	* sysdeps/unix/sysv/linux/include/sys/sysinfo.h
	* sysdeps/unix/sysv/linux/include/sys/timex.h
	* sysdeps/x86/fpu/include/bits/fenv.h:
	Add #ifndef _ISOMAC guard around internal declarations.
	Add multiple-inclusion guard if not already present.
2016-09-23 08:43:56 -04:00
Joseph Myers
487890009e Support __STDC_WANT_LIB_EXT2__ feature test macro.
This patch implements support for the __STDC_WANT_LIB_EXT2__ feature
test macro from ISO/IEC TR 24731-2:2010, thereby implementing one
possible approach for supporting ISO C feature test macros.

Recall that, as described in
<https://sourceware.org/ml/libc-alpha/2016-05/msg00486.html>, these
macros work based on the definition when affected headers are
included, so cannot be handled once when the first system header is
included because that might not be one of the headers the particular
macro in question affects.
<https://sourceware.org/ml/libc-alpha/2016-05/msg00680.html> expresses
views on possible approaches for implementation and
<https://sourceware.org/ml/libc-alpha/2016-06/msg00039.html> follows
up on that.

This patch arranges things so that the relevant condition is
__GLIBC_USE (LIB_EXT2), following one of the suggestions given.
Headers using these macros include <bits/libc-header-start.h>, which
in turn includes <features.h>.  Headers must define
__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION before including
<bits/libc-header-start.h>, to discourage inclusion outside glibc as
requested.  __USE_GNU conditions on affected functions are changed to
__GLIBC_USE (LIB_EXT2), while it's added as an additional alternative
on the conditions for functions already enabled for some POSIX
versions.

It would be possible to convert existing __USE_* conditionals to
__GLIBC_USE (with the relevant __GLIBC_USE_* being defined in
<features.h> where __USE_* are presently defined), and so make them
typo-proof (given -Wundef -Werror in glibc builds) because __GLIBC_USE
is used with #if not #ifdef / #if defined.

No attempt is made to enforce the rule about diagnosing different
definitions of __STDC_WANT_LIB_EXT2__ when affected headers are
included; such a diagnostic is incompatible with multiple-include
guards on the affected headers, unless compiler extensions are added
to support it.

As previously noted, glibc does not implement all features from TR
24731-2:2010: the functions aswprintf vaswprintf getwdelim getwline
are not in glibc, although they would be appropriate to add if someone
wished to do so.  But I think it makes sense to support the feature
test macro if *any* of the controlled features are present in glibc.

Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).

	* bits/libc-header-start.h: New file.
	* Makefile (headers): Add bits/libc-header-start.h.
	* include/features.h (__STDC_WANT_LIB_EXT2__): Document.
	(__GLIBC_USE): New macro.
	* libio/stdio.h: Define
	__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
	<bits/libc-header-start.h> instead of including <features.h>.
	(fmemopen): Declare also if [__GLIBC_USE (LIB_EXT2)].
	(open_memstream): Likewise.
	(vasprintf): Declare if [__GLIBC_USE (LIB_EXT2)], not [__USE_GNU].
	(__asprintf): Likewise.
	(asprintf): Likewise.
	(__getdelim): Declare also if [__GLIBC_USE (LIB_EXT2)].
	(getdelim): Likewise.
	(getline): Likewise.
	* string/string.h: Define
	__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
	<bits/libc-header-start.h> instead of including <features.h>.
	(strdup): Declare also if [__GLIBC_USE (LIB_EXT2)]
	(strndup): Likewise.
	* wcsmbs/wchar.h: Define
	__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
	<bits/libc-header-start.h> instead of including <features.h>.
	(open_wmemstream): Declare also if [__GLIBC_USE (LIB_EXT2)].
	* manual/creature.texi (__STDC_WANT_LIB_EXT2__): Document macro.
2016-08-02 17:40:35 +00:00
Roland McGrath
684ce7e0fc Fix edito in last change. 2016-03-04 15:45:35 -08:00
Roland McGrath
1241b50b23 Conditionalize c++-types-check.out addition to tests-special. 2016-03-04 15:07:12 -08:00
Roland McGrath
00db8bf4db Fix c++-types-check conditionalization. 2016-03-04 13:22:00 -08:00
Joseph Myers
f7a9f785e5 Update copyright dates with scripts/update-copyrights. 2016-01-04 16:05:18 +00:00
Florian Weimer
c100dca32a Implement "make update-all-abi"
* scripts/update-abilist.sh: New file.
	* Makefile (+subdir_targets): Add subdir_update-all-abi.
	* Makerules (update-all-abi-%, update-all-abi)
	(subdir_update-all-abi): New targets.
	* elf/Makefile (update-all-abi): New target.
2015-11-24 17:10:19 +01:00
Joseph Myers
783dd2d3af Use -std=gnu11 instead of -std=gnu99.
Now that GCC 4.7 or later is required to build glibc, this patch moves
the build from using -std=gnu99 to -std=gnu11 (option added in 4.7).
This allows use of C11 features from GCC's headers, such as new
float.h macros and max_align_t.

Tested for x86_64 and x86 (testsuite; installed stripped shared
libraries are unchanged by the patch on x86_64, while I see some
slight code reordering of no significance on x86).

	* Makeconfig (CFLAGS): Use -std=gnu11 instead of -std=gnu99.
	* Makefile ($(objpfx)c++-types-check.out): Filter out -std=gnu11
	instead of -std=gnu99.
	* configure.ac (systemtap): Test with -std=gnu11 instead of
	-std=gnu99.
	* configure: Regenerated.
	* math/gen-auto-libm-tests.c: Use -std=gnu11 instead of -std=gnu99
	in compilation command in comment.
2015-10-27 21:47:22 +00:00
Joseph Myers
f5659917f9 Remove support for removing glibc 2.0 headers.
There is a configure test for the presence of glibc 2.0 headers (that
were renamed / no longer installed in glibc 2.1) and associated
support for removing them on "make install".

Normal practice for subsequent removal / renaming of installed files
has been not to do anything special about removing them; if you want
installed files from an old installation removed reliably, you need to
use a packaging system that tracks what files were installed by a
previous glibc package (via installing in an intermediate directory
with install_root).  I think it's been long enough since 2.0 that it's
not particularly useful to have that special logic for those old
headers either; this patch removes it.

Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).

	* configure.ac (old_glibc_headers): Remove configure test.
	* configure: Regenerated.
	* config.make.in (old-glibc-headers): Remove variable.
	* Makefile [!$(install_root) && $(old-glibc-headers) = yes]
	(install): Remove dependency on remove-old-headers.
	(headers2_0): Remove variable.
	(remove-old-headers): Remove rule.
2015-10-26 22:46:04 +00:00
Joseph Myers
8e2f7c6811 Use -Wold-style-definition.
This patch makes glibc build with -Wold-style-definition to avoid
old-style function definitions creeping back in by accident.

Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).  Also tested build for arm,
mips64 and powerpc32.  Hopefully there aren't any remaining
system-specific files with old-style definitions whose formatting
evaded my searches, but if there are, they will be easy to fix.

	* Makeconfig (+gccwarn-c): Add -Wold-style-definition.
	* Makefile ($(objpfx)c++-types-check.out): Filter out
	$(+gccwarn-c) instead of -Wstrict-prototypes.
2015-10-21 15:14:13 +00:00
Carlos O'Donell
3b2cc56dbc Prevent check-local-headers.sh hang.
Consensus in [1] was that the right way to fix this was simply to
redirect from /dev/null to terminate the test if no inputs was found
by the tests own globbing e.g. "*/*.{o,os,oS}.d" This can happen when
the build is incomplete and the tests are started. This failure causes
check-local-headers.sh to hang forever waiting for input from stdin.
This change makes the test terminate immediately if the glob doesn't
return any files.

[1] https://sourceware.org/ml/libc-alpha/2014-12/msg00337.html
2015-09-14 09:57:58 -04:00
Joseph Myers
625cd00f22 Don't install bits/libc-lock.h or bits/stdio-lock.h.
The bits/libc-lock.h and bits/stdio-lock.h headers are installed, but
not used by any other installed header.

Accordingly, this patch stops these headers from being installed.  A
followup is intended to move these headers out of the bits/ namespace.

Tested for x86_64 (testsuite, and that installed stripped shared
libraries are unchanged by the patch).

	* Makefile (headers): Remove bits/libc-lock.h.
	* libio/Makefile (headers): Remove bits/stdio-lock.h.
2015-09-03 20:25:55 +00:00
Siddhesh Poyarekar
99db95db37 Succeed if make check does not report any errors
The conditional that evaluates if there are any FAILed test cases
currently always fails, since we ensure it fails if we find any
unexpected results in tests.sum and it would obviously fail if it does
not find failed results in tests.sum.  This patch fixes this by simply
inverting the result of the egrep, i.e. succeed if egrep fails (to
find failed results) and fail if it succeeds.

Tested with 'make subdirs=localedata check' and 'make subdirs=locale
check' where all tests succeed and with 'make subdirs=elf check' where
a couple of tests fail for me.

	 * Makefile (summarize-tests): Fix return value on success.
2015-05-19 06:36:29 +05:30
Roland McGrath
44a6213c8e Let tests result in UNSUPPORTED; use that for unbuildable C++ cases 2015-03-10 15:13:14 -07:00
Joseph Myers
b168057aaa Update copyright dates with scripts/update-copyrights. 2015-01-02 16:29:47 +00:00
Joseph Myers
fc00cf7bcd Move semaphore.h to sysdeps/pthread/.
Carlos reported failures in conform/ tests in environments where the
compiler used could only find headers in glibc's source and build
trees, not any previously installed headers
<https://sourceware.org/ml/libc-alpha/2014-09/msg00040.html>.

This patch moves nptl/semaphore.h to sysdeps/pthread/semaphore.h so
that it can be found by builds from all glibc subdirectories; it's not
in any way NPTL-specific.  (I left the Makefile setting to install
this header in nptl/, but maybe it should move as well - it's just not
clear to me what ifeq ($(subdir),...) conditional should be used to
select the directory to associate the header with for installation
purposes.  The path in the toplevel Makefile used for begin-end-check
also remains hardcoded; it's a known todo issue to rework that test to
run in each subdirectory checking the headers installed from that
subdirectory, rather than a separate hardcoded list.)

Tested for x86_64 (testsuite, and that installed stripped shared
libraries are unchanged by the patch).  I did *not* test a
configuration such as that in which Carlos saw failure.

	* nptl/semaphore.h: Move to ...
	* sysdeps/pthread/semaphore.h: ... here.
	* Makefile (installed-headers): Change nptl/semaphore.h to
	sysdeps/pthread/semaphore.h.
2014-12-11 22:58:48 +00:00