Commit Graph

27 Commits

Author SHA1 Message Date
Joseph Myers
6d7e8eda9b Update copyright dates with scripts/update-copyrights 2023-01-06 21:14:39 +00:00
Siddhesh Poyarekar
67e3b0c63c tests/string: Drop simple/stupid/builtin tests
In most cases the simple/stupid/builtin functions were in there to
benchmark optimized implementations against.  Only in some cases the
functions are used to check expected results.

Remove these tests from IMPL() and only keep them in wherever they're
used for a specific purpose, e.g. to generate expected results.

This improves timing of `make subdirs=string` by over a minute and a
half (over 15%) on a Whiskey Lake laptop.

Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Noah Goldstein <libc-alpha@sourceware.org>
2022-04-06 20:53:24 +05:30
Paul Eggert
581c785bf3 Update copyright dates with scripts/update-copyrights
I used these shell commands:

../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")

and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.

I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah.  I don't
know why I run into these diagnostics whereas others evidently do not.

remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
2022-01-01 11:40:24 -08:00
Siddhesh Poyarekar
30891f35fa Remove "Contributed by" lines
We stopped adding "Contributed by" or similar lines in sources in 2012
in favour of git logs and keeping the Contributors section of the
glibc manual up to date.  Removing these lines makes the license
header a bit more consistent across files and also removes the
possibility of error in attribution when license blocks or files are
copied across since the contributed-by lines don't actually reflect
reality in those cases.

Move all "Contributed by" and similar lines (Written by, Test by,
etc.) into a new file CONTRIBUTED-BY to retain record of these
contributions.  These contributors are also mentioned in
manual/contrib.texi, so we just maintain this additional record as a
courtesy to the earlier developers.

The following scripts were used to filter a list of files to edit in
place and to clean up the CONTRIBUTED-BY file respectively.  These
were not added to the glibc sources because they're not expected to be
of any use in future given that this is a one time task:

https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dc
https://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02

Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2021-09-03 22:06:44 +05:30
Paul Eggert
2b778ceb40 Update copyright dates with scripts/update-copyrights
I used these shell commands:

../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")

and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
2021-01-02 12:17:34 -08:00
Joseph Myers
d614a75396 Update copyright dates with scripts/update-copyrights. 2020-01-01 00:14:33 +00:00
Stefan Liebler
bfdb731438 S390: Fix handling of needles crossing a page in strstr z15 ifunc-variant. [BZ #25226]
If the specified needle crosses a page-boundary, the s390-z15 ifunc variant of
strstr truncates the needle which results in invalid results.

This is fixed by loading the needle beyond the page boundary to v18 instead of v16.
The bug is sometimes observable in test-strstr.c in check1 and check2 as the
haystack and needle is stored on stack. Thus the needle can be on a page boundary.

check2 is now extended to test haystack / needles located on stack, at end of page
and on two pages.

This bug was introduced with commit 6f47401bd5
("S390: Add arch13 strstr ifunc variant.") and is already released in glibc 2.30.
2019-11-27 12:35:40 +01:00
Paul Eggert
5a82c74822 Prefer https to http for gnu.org and fsf.org URLs
Also, change sources.redhat.com to sourceware.org.
This patch was automatically generated by running the following shell
script, which uses GNU sed, and which avoids modifying files imported
from upstream:

sed -ri '
  s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g
  s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g
' \
  $(find $(git ls-files) -prune -type f \
      ! -name '*.po' \
      ! -name 'ChangeLog*' \
      ! -path COPYING ! -path COPYING.LIB \
      ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \
      ! -path manual/texinfo.tex ! -path scripts/config.guess \
      ! -path scripts/config.sub ! -path scripts/install-sh \
      ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \
      ! -path INSTALL ! -path  locale/programs/charmap-kw.h \
      ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \
      ! '(' -name configure \
            -execdir test -f configure.ac -o -f configure.in ';' ')' \
      ! '(' -name preconfigure \
            -execdir test -f preconfigure.ac ';' ')' \
      -print)

and then by running 'make dist-prepare' to regenerate files built
from the altered files, and then executing the following to cleanup:

  chmod a+x sysdeps/unix/sysv/linux/riscv/configure
  # Omit irrelevant whitespace and comment-only changes,
  # perhaps from a slightly-different Autoconf version.
  git checkout -f \
    sysdeps/csky/configure \
    sysdeps/hppa/configure \
    sysdeps/riscv/configure \
    sysdeps/unix/sysv/linux/csky/configure
  # Omit changes that caused a pre-commit check to fail like this:
  # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines
  git checkout -f \
    sysdeps/powerpc/powerpc64/ppc-mcount.S \
    sysdeps/unix/sysv/linux/s390/s390-64/syscall.S
  # Omit change that caused a pre-commit check to fail like this:
  # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline
  git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
2019-09-07 02:43:31 -07:00
Stefan Liebler
f0c5a803bd Fix gcc 9 build errors for make xcheck. [BZ #24556]
This patch fixes the following gcc 9 warnings for "make xcheck" / "make bench":
-string/tst-strcasestr.c:
../include/bits/../../misc/bits/error.h:42:5: error: ‘%s’ directive argument is null [-Werror=format-overflow=]

-argp/argp-test.c:
argp-test.c:130:20: error: ‘%d’ directive writing between 1 and 11 bytes into a region of size 10 [-Werror=format-overflow=]
argp-test.c:130:19: note: directive argument in the range [-2147483648, 122]
argp-test.c:130:5: note: ‘sprintf’ output between 2 and 12 bytes into a destination of size 10

-nss/tst-field.c:
tst-field.c:52:7: error: ‘%s’ directive argument is null [-Werror=format-overflow=]

-benchtests/bench-strstr.c:
../include/bits/../../misc/bits/error.h:42:5: error: ‘%s’ directive argument is null [-Werror=format-overflow=]

-benchtests/bench-malloc-simple.c:
bench-malloc-simple.c:93:16: error: iteration 3 invokes undefined behavior [-Werror=aggressive-loop-optimizations]

ChangeLog:

	[BZ #24556]
	* string/test-strcasestr.c (check_result): Add NULL check.
	* nss/tst-field.c (check_rewrite): Likewise.
	* benchtests/bench-strstr.c (do_one_test): Likewise.
	* string/test-strstr.c (check_result): Likewise.
	* argp/argp-test.c (popt): Increase size of buf to 12.
	* benchtests/bench-malloc-simple.c (bench):
	Do not initialize tests array out of bounds.
2019-06-19 12:32:04 +02:00
Joseph Myers
04277e02d7 Update copyright dates with scripts/update-copyrights.
* All files with FSF copyright notices: Update copyright dates
	using scripts/update-copyrights.
	* locale/programs/charmap-kw.h: Regenerated.
	* locale/programs/locfile-kw.h: Likewise.
2019-01-01 00:11:28 +00:00
Wilco Dijkstra
83a552b0bb Fix strstr bug with huge needles (bug 23637)
The generic strstr in GLIBC 2.28 fails to match huge needles.  The optimized
AVAILABLE macro reads ahead a large fixed amount to reduce the overhead of
repeatedly checking for the end of the string.  However if the needle length
is larger than this, two_way_long_needle may confuse this as meaning the end
of the string and return NULL.  This is fixed by adding the needle length to
the amount to read ahead.

	[BZ #23637]
	* string/test-strstr.c (pr23637): New function.
	(test_main): Add tests with longer needles.
	* string/strcasestr.c (AVAILABLE): Fix readahead distance.
	* string/strstr.c (AVAILABLE): Likewise.
2018-09-19 16:50:18 +01:00
Wilco Dijkstra
3ae725dfb6 Improve strstr performance
Improve strstr performance.  Strstr tends to be slow because it uses
many calls to memchr and a slow byte loop to scan for the next match.
Performance is significantly improved by using strnlen on larger blocks
and using strchr to search for the next matching character.  strcasestr
can also use strnlen to scan ahead, and memmem can use memchr to check
for the next match.

On the GLIBC bench tests the performance gains on Cortex-A72 are:
strstr: +25%
strcasestr: +4.3%
memmem: +18%

On a 256KB dataset strstr performance improves by 67%, strcasestr by 47%.

    Reviewd-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2018-07-16 17:51:52 +01:00
Joseph Myers
688903eb3e Update copyright dates with scripts/update-copyrights.
* All files with FSF copyright notices: Update copyright dates
	using scripts/update-copyrights.
	* locale/programs/charmap-kw.h: Regenerated.
	* locale/programs/locfile-kw.h: Likewise.
2018-01-01 00:32:25 +00:00
Zack Weinberg
7c3018f9e4 Suppress internal declarations for most of the testsuite.
This patch adds a new build module called 'testsuite'.
IS_IN (testsuite) implies _ISOMAC, as do IS_IN_build and __cplusplus
(which means several ad-hoc tests for __cplusplus can go away).
libc-symbols.h now suppresses almost all of *itself* when _ISOMAC is
defined; in particular, _ISOMAC mode does not get config.h
automatically anymore.

There are still quite a few tests that need to see internal gunk of
one variety or another.  For them, we now have 'tests-internal' and
'test-internal-extras'; files in this category will still be compiled
with MODULE_NAME=nonlib, and everything proceeds as it always has.
The bulk of this patch is moving tests from 'tests' to
'tests-internal'.  There is also 'tests-static-internal', which has
the same effect on files in 'tests-static', and 'modules-names-tests',
which has the *inverse* effect on files in 'modules-names' (it's
inverted because most of the things in modules-names are *not* tests).
For both of these, the file must appear in *both* the new variable and
the old one.

There is also now a special case for when libc-symbols.h is included
without MODULE_NAME being defined at all.  (This happens during the
creation of libc-modules.h, and also when preprocessing Versions
files.)  When this happens, IS_IN is set to be always false and
_ISOMAC is *not* defined, which was the status quo, but now it's
explicit.

The remaining changes to C source files in this patch seemed likely to
cause problems in the absence of the main change.  They should be
relatively self-explanatory.  In a few cases I duplicated a definition
from an internal header rather than move the test to tests-internal;
this was a judgement call each time and I'm happy to change those
however reviewers feel is more appropriate.

	* Makerules: New subdir configuration variables 'tests-internal'
	and 'test-internal-extras'.  Test files in these categories will
	still be compiled with MODULE_NAME=nonlib.  Test files in the
	existing categories (tests, xtests, test-srcs, test-extras) are
	now compiled with MODULE_NAME=testsuite.
	New subdir configuration variable 'modules-names-tests'.  Files
	which are in both 'modules-names' and 'modules-names-tests' will
	be compiled with MODULE_NAME=testsuite instead of
	MODULE_NAME=extramodules.
	(gen-as-const-headers): Move to tests-internal.
	(do-tests-clean, common-mostlyclean): Support tests-internal.
	* Makeconfig (built-modules): Add testsuite.
	* Makefile: Change libof-check-installed-headers-c and
	libof-check-installed-headers-cxx to 'testsuite'.
	* Rules: Likewise.  Support tests-internal.
	* benchtests/strcoll-inputs/filelist#en_US.UTF-8:
	Remove extra-modules.mk.

	* config.h.in: Don't check for __OPTIMIZE__ or __FAST_MATH__ here.
	* include/libc-symbols.h: Move definitions of _GNU_SOURCE,
	PASTE_NAME, PASTE_NAME1, IN_MODULE, IS_IN, and IS_IN_LIB to the
	very top of the file and rationalize their order.
	If MODULE_NAME is not defined at all, define IS_IN to always be
	false, and don't define _ISOMAC.
	If any of IS_IN (testsuite), IS_IN_build, or __cplusplus are
	true, define _ISOMAC and suppress everything else in this file,
	starting with the inclusion of config.h.
	Do check for inappropriate definitions of __OPTIMIZE__ and
	__FAST_MATH__ here, but only if _ISOMAC is not defined.
        Correct some out-of-date commentary.

	* include/math.h: If _ISOMAC is defined, undefine NO_LONG_DOUBLE
	and _Mlong_double_ before including math.h.
	* include/string.h: If _ISOMAC is defined, don't expose
	_STRING_ARCH_unaligned. Move a comment to a more appropriate
	location.

	* include/errno.h, include/stdio.h, include/stdlib.h, include/string.h
	* include/time.h, include/unistd.h, include/wchar.h: No need to
	check __cplusplus nor use __BEGIN_DECLS/__END_DECLS.

	* misc/sys/cdefs.h (__NTHNL): New macro.
	* sysdeps/m68k/m680x0/fpu/bits/mathinline.h
	(__m81_defun): Use __NTHNL to avoid errors with GCC 6.

	* elf/tst-env-setuid-tunables.c: Include config.h with _LIBC
	defined, for HAVE_TUNABLES.
	* inet/tst-checks-posix.c: No need to define _ISOMAC.
	* intl/tst-gettext2.c: Provide own definition of N_.
	* math/test-signgam-finite-c99.c: No need to define _ISOMAC.
	* math/test-signgam-main.c: No need to define _ISOMAC.
	* stdlib/tst-strtod.c: Convert to test-driver. Split locale_test to...
	* stdlib/tst-strtod1i.c: ...this new file.
	* stdlib/tst-strtod5.c: Convert to test-driver and add copyright notice.
        Split tests of __strtod_internal to...
	* stdlib/tst-strtod5i.c: ...this new file.
	* string/test-string.h: Include stdint.h. Duplicate definition of
	inhibit_loop_to_libcall here (from libc-symbols.h).
	* string/test-strstr.c: Provide dummy definition of
	libc_hidden_builtin_def when including strstr.c.
	* sysdeps/ia64/fpu/libm-symbols.h: Suppress entire file in _ISOMAC
	mode; no need to test __STRICT_ANSI__ nor __cplusplus as well.
	* sysdeps/x86_64/fpu/math-tests-arch.h: Include cpu-features.h.
	Don't include init-arch.h.
	* sysdeps/x86_64/multiarch/test-multiarch.h: Include cpu-features.h.
	Don't include init-arch.h.

	* elf/Makefile: Move tst-ptrguard1-static, tst-stackguard1-static,
	tst-tls1-static, tst-tls2-static, tst-tls3-static, loadtest,
	unload, unload2, circleload1, neededtest, neededtest2,
	neededtest3, neededtest4, tst-tls1, tst-tls2, tst-tls3,
	tst-tls6, tst-tls7, tst-tls8, tst-dlmopen2, tst-ptrguard1,
	tst-stackguard1, tst-_dl_addr_inside_object, and all of the
	ifunc tests to tests-internal.
	Don't add $(modules-names) to test-extras.
	* inet/Makefile: Move tst-inet6_scopeid_pton to tests-internal.
	Add tst-deadline to tests-static-internal.
	* malloc/Makefile: Move tst-mallocstate and tst-scratch_buffer to
	tests-internal.
	* misc/Makefile: Move tst-atomic and tst-atomic-long to tests-internal.
	* nptl/Makefile: Move tst-typesizes, tst-rwlock19, tst-sem11,
	tst-sem12, tst-sem13, tst-barrier5, tst-signal7, tst-tls3,
	tst-tls3-malloc, tst-tls5, tst-stackguard1, tst-sem11-static,
	tst-sem12-static, and tst-stackguard1-static to tests-internal.
        Link tests-internal with libpthread also.
	Don't add $(modules-names) to test-extras.
	* nss/Makefile: Move tst-field to tests-internal.
	* posix/Makefile: Move bug-regex5, bug-regex20, bug-regex33,
	tst-rfc3484, tst-rfc3484-2, and tst-rfc3484-3 to tests-internal.
	* stdlib/Makefile: Move tst-strtod1i, tst-strtod3, tst-strtod4,
	tst-strtod5i, tst-tls-atexit, and tst-tls-atexit-nodelete to
	tests-internal.
        * sunrpc/Makefile: Move tst-svc_register to tests-internal.
	* sysdeps/powerpc/Makefile: Move test-get_hwcap and
	test-get_hwcap-static to tests-internal.
	* sysdeps/unix/sysv/linux/Makefile: Move tst-setgetname to
	tests-internal.
	* sysdeps/x86_64/fpu/Makefile: Add all libmvec test modules to
	modules-names-tests.
2017-05-11 19:27:59 -04:00
Wainer dos Santos Moschetta
fb82116f24 Update string tests to use the support test driver.
Replaced all imports of test-skeleton.c with support/test-driver.c.

In some cases it was needed to adjust do_test to return int
instead of static int since that is the method's signature expected by
test-driver.c.

Checked on x86_64.

	* string/test-string.h (TEST_FUNCTION): Use test_main instead of
	test_main ().
	(CMDLINE_PROCESS): Use function instead of defined macro.
	* debug/test-strcpy_chk.c: Import support/test-driver.c and also
	<suppport/support.h> to use set_fortify_handler().
	* string/bug-envz1.c: Import support/test-driver.c instead of
	test-skeleton.c.
	* string/bug-strcoll2.c: Likewise.
	* string/bug-strtok1.c: Likewise.
	* string/stratcliff.c: Likewise.
	* string/test-ffs.c: Likewise.
	* string/test-memccpy.c: Likewise.
	* string/test-memchr.c: Likewise.
	* string/test-memcmp.c: Likewise.
	* string/test-memcpy.c: Likewise.
	* string/test-memmem.c: Likewise.
	* string/test-memmove.c: Likewise.
	* string/test-memrchr.c: Likewise.
	* string/test-memset.c: Likewise.
	* string/test-rawmemchr.c: Likewise.
	* string/test-strcasecmp.c: Likewise.
	* string/test-strcasestr.c: Likewise.
	* string/test-strcat.c: Likewise.
	* string/test-strchr.c: Likewise.
	* string/test-strcmp.c: Likewise.
	* string/test-strcpy.c: Likewise.
	* string/test-string.h: Likewise.
	* string/test-strlen.c: Likewise.
	* string/test-strncasecmp.c: Likewise.
	* string/test-strncat.c: Likewise.
	* string/test-strncmp.c: Likewise.
	* string/test-strncpy.c: Likewise.
	* string/test-strnlen.c: Likewise.
	* string/test-strpbrk.c: Likewise.
	* string/test-strrchr.c: Likewise.
	* string/test-strspn.c: Likewise.
	* string/test-strstr.c: Likewise.
	* string/tst-bswap.c: Likewise.
	* string/tst-cmp.c: Likewise.
	* string/tst-endian.c: Likewise.
	* string/tst-inlcall.c: Likewise.
	* string/tst-strcoll-overflow.c: Likewise.
	* string/tst-strfry.c: Likewise.
	* string/tst-strlen.c: Likewise.
	* string/tst-strtok.c: Likewise.
	* string/tst-strtok_r.c: Likewise.
	* string/tst-strxfrm.c: Likewise.
	* string/tst-strxfrm2.c: Likewise.
	* string/tst-svc.c: Likewise.
	* string/tst-svc2.c: Likewise.
2017-03-23 11:32:29 -03:00
Joseph Myers
bfff8b1bec Update copyright dates with scripts/update-copyrights. 2017-01-01 00:14:16 +00:00
Joseph Myers
f7a9f785e5 Update copyright dates with scripts/update-copyrights. 2016-01-04 16:05:18 +00:00
Joseph Myers
b168057aaa Update copyright dates with scripts/update-copyrights. 2015-01-02 16:29:47 +00:00
Allan McRae
d4697bc93d Update copyright notices with scripts/update-copyrights 2014-01-01 22:00:23 +10:00
Siddhesh Poyarekar
fec799f823 Remove performance-related bits from string tests 2013-06-11 15:08:13 +05:30
Joseph Myers
568035b787 Update copyright notices with scripts/update-copyrights. 2013-01-02 19:05:09 +00:00
H.J. Lu
69f07e5fd1 Add string IFUNC tests 2012-10-19 22:10:16 -07:00
H.J. Lu
5d41d91a3e Add a strstr test for page boundary 2012-10-06 16:04:56 -07:00
H.J. Lu
d7e0dab96d Add a testase for BZ #14602 2012-10-05 13:32:27 -07:00
H.J. Lu
03759f47db Test strcasestr/strchr/strstr under all implementations 2012-10-05 13:32:07 -07:00
Paul Eggert
59ba27a63a Replace FSF snail mail address with URLs. 2012-02-09 23:18:22 +00:00
Ulrich Drepper
dbc676d4ff Add performance tests for strstr and strcasestr. 2010-07-23 22:27:53 -07:00