The set_dataplane() API in <sys/dataplane.h> originally supported the
Tilera version of Linux as shipped to our customers. Once we started
upstreaming the dataplane support in the kernel, the API changed
to use fcntl() as part of the current task-isolation patch series.
It doesn't seem like continuing to support the old API is useful
for newly-compiled code, and even supporting the old glibc binary
API on an upstream kernel that supports the new task isolation mode
isn't straightforward, since the semantics have changed in ways that
make it hard to map the old semantics precisely to the new ones,
so just return ENOSYS.
This patch consolidates all Linux setrlimit and getrlimit on the default
sysdeps/unix/sysv/linux/{set,get}rlimit{64}.c. It contains two exceptions:
1. mips32 and mips64n32 which requires a versioned symbol for GLIBC 2.19
and higher due a broken RLIM64_INFINITY constant.
2. sparc32 does not define a compat symbol for getrlimit64 for old 2GB
limit. I am not sure if it is required, but a RLIM_INFINITY fix [1]
change its definition without adding a compat symbol. This patch does
not aim to address this possible issue, it follow current symbol
export.
The default implementation uses prlimit64 for 64 bit rlim_t ({set,get}rlimit64)
and if it fails with ENOSYS it fall back to {get,set}rlimit syscall. This
code path is only used on kernel older than 2.6.36 (basically now only x86)
and I avoid to user __ASSUME_PRLIMTI64 to simplify the implementation. Once
x86 moves to be on par with other architectures regarding minimum kernel
supported we can get rid of using old syscalls and default path.
A new type size define is added, __RLIM_T_MATCHES_RLIM64_T, where is set as
default for 64 bits ports. This allows the default implementation to avoid
{get,set}rlimit building and alias {get,set}rlimit64 to {get,set}rlimit.
Checked on x86_64, i386, armhf, aarch64, and powerpc64le. I also did a
sanity build plus check-abi on all other supported architectures.
[1] Commit 9c96ff2385
Adhemerval Zanella <adhemerval.zanella@linaro.org>
Yury Norov <ynorov@caviumnetworks.com>
* bits/typesizes.h (__RLIM_T_MATCHES_RLIM64_T): define.
* sysdeps/unix/sysv/linux/alpha/bits/typesizes.h
(__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/generic/bits/typesizes.h
(__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/s390/bits/typesizes.h [__s390x__]
(__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/typesizes.h
[__arch64__ || __sparcv9] (__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/x86/bits/typesizes.h [__86_64__]
(__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/arm/Makefile [$(subdir) = resource]
(sysdep_routines): Remove oldgetrlimit64.
* sysdeps/unix/sysv/linux/i386/Makefile [$(subdir) = resource]
(sysdep_routines): Likewise.
* sysdeps/unix/sysv/linux/m68k/Makefile [$(subdir) = resource]
(sysdep_routines): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/Makefile
[$(subdir) = resource] (sysdep_routines): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/Makefile
[$(subdir) = resource] (sysdep_routines): Likewise.
* sysdeps/unix/sysv/linux/arm/getrlimit64.c: Remove file.
* sysdeps/unix/sysv/linux/arm/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/hppa/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/i386/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/i386/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/sh/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/setrlimit64.c: Likewise.
* sysdeps/sysv/linux/generic/wordsize-32/syscalls.list: Remove
setrlimit and getrlimit.
* sysdeps/unix/sysv/linux/hppa/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/i386/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/getrlimit.c: New file.
* sysdeps/unix/sysv/linux/sparc/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/setrlimit.c: Likewise.
* sysdeps/unix/sysv/linux/getrlimit64.c (__getrlimit64): Handle
__RLIM_T_MATCHES_RLIM64_T and add alias if defined.
(__old_getrlimit64): Add compatibility symbol.
* sysdeps/unix/sysv/linux/setrlimit64.c (__setrlimit): Likewise.
The check-installed-headers tests show up that the Alpha <sys/user.h>
is not self-contained, using size_t without including any header that
defines it. This patch fixes it by including <stddef.h>, as done for
other architectures' versions of this header.
Tested for Alpha (compilation only).
* sysdeps/unix/sysv/linux/alpha/sys/user.h: Include <stddef.h>.
Implement an internal version of __access called __access_noerrno that
avoids setting errno. This is useful to check accessibility of files
very early on in process startup i.e. before TLS setup. This allows
tunables to replace MALLOC_CHECK_ safely (i.e. check existence of
/etc/suid-debug to enable/disable MALLOC_CHECK) and at the same time
initialize very early so that it can override IFUNCs.
Checked on x86_64.
* hurd/hurd.h (__hurd_fail_noerrno): New function.
* include/unistd.h [IS_IN (rtld) || !defined SHARED]: Declare
__access_noerrno.
* io/access.c (__access_noerrno): New function.
* sysdeps/mach/hurd/access.c (hurd_fail_seterrno): New function.
(hurd_fail_seterrno): Likewise.
(access_common): Likewise.
(__access_noerrno): Likewise.
* sysdeps/nacl/access.c (__access_noerrno): Likewise.
* sysdeps/unix/sysv/linux/access.c (__access_noerrno): Likewise.
* sysdeps/nacl/nacl-interfaces.h (NACL_CALL_NOERRNO): New
macro.
This patch fixes SH4 register-dump.h to declare a variable inside the
the build for soft-float.
Tested (compilation only) for SH4 soft-float.
* sysdeps/unix/sysv/linux/sh/sh4/register-dump.h (register_dump):
Only declare fpregs if [__SH_FPU_ANY__].
As discussed in the thread starting at
<https://sourceware.org/ml/libc-alpha/2015-06/msg00657.html>, there
are various problems with the sigcontext / mcontext / ucontext
structures on SH. The soft-float SH4 case in fact does not build at
present, with errors processing
sysdeps/unix/sysv/linux/sh/sh4/ucontext_i.sym with gen-as-const.awk
("error: 'mcontext_t {aka struct <anonymous>}' has no member named
'fpregs'").
Linux 4.8 (commit bbe6c77857c38f4acbdc4fc70399515226d1859a) moved to
always using the same sigcontext structure on SH, with room for
floating-point registers whether or not present on the processor.
This patch makes the glibc header match.
Tested (compilation only) for sh4-linux-gnu hard float, and in
conjunction with other fixes for soft float.
* sysdeps/unix/sysv/linux/sh/sys/ucontext.h [__SH4__ || __SH4A__]:
Make code unconditional.
[!(__SH4__ || __SH4A__)]: Remove conditional code.
This patch makes tilegx32 install libraries in lib32 directories,
matching what GCC expects and avoiding conflict with 64-bit libraries
installed in lib directories.
Tested (compilation only) for tilegx (32-bit and 64-bit, BE and LE,
GCC 5).
* sysdeps/unix/sysv/linux/tile/tilegx/configure.ac: Use
LIBC_SLIBDIR_RTLDDIR for tilegx32.
* sysdeps/unix/sysv/linux/tile/tilegx/configure: Regenerated.
The check-installed-headers tests show up that the SH <sys/user.h> is
not self-contained, using size_t without including any header that
defines it. This patch fixes it by including <stddef.h>, as done for
other architectures' versions of this header.
Tested for SH3 and SH4 (compilation only).
* sysdeps/unix/sysv/linux/sh/sys/user.h: Include <stddef.h>.
Since 327792c sh4 builds fails with:
../sysdeps/unix/sysv/linux/kernel-features.h:49:0: error: "__ASSUME_ST_INO_64_BIT" redefined [-Werror]
#define __ASSUME_ST_INO_64_BIT 1
^
In file included from ../sysdeps/unix/sysv/linux/sysdep.h:19:0,
from ../sysdeps/unix/sysv/linux/sh/sysdep.h:24,
from ../sysdeps/unix/sysv/linux/sh/sh4/sysdep.h:4,
from <stdin>:1:
../sysdeps/unix/sysv/linux/sh/kernel-features.h:47:0: note: this is the location of the previous definition
#define __ASSUME_ST_INO_64_BIT 0
It is because sh4 kernel-features.sh is included multiple times
without guards and this patch fixes by adding them.
Tested on a sh4-linux-gnu build.
* sysdeps/unix/sysv/linux/sh/kernel-features.h: Add include
guards.
This patch consolidates the Linux access implementation on
sysdeps/unix/sysv/linux/access.c. Similar to auto-generation through
syscalls.list, __NR_access is check and __NR_faccessat is used only
for newer architectures (where __NR_access is not defined).
Checked on x86_64.
* sysdeps/unix/sysv/linux/access.c: New file.
* sysdeps/unix/sysv/linux/generic/access.c: Remove file.
This patch consolidates all Linux truncate implementation on
sysdeps/unix/sysv/linux/truncate{64}.c. It is based on
{INTERNAL,INLINE}_SYSCALL patch [1] to simplify the syscall
construction.
General idea is to build ftruncate iff __OFF_T_MATCHES_OFF64_T is not
defined, otherwise ftruncate64 will be build and ftruncate will be an
alias. The fallocate will use old compat syscall and pass 32-bit off_t
argument, while fallocate64 will handle the correct off64_t passing using
__ALIGNMENT_ARG and SYSCALL_LL64 macros.
Tested on x86_64, i386, aarch64, and armhf.
* sysdeps/unix/sysv/linux/arm/truncate64.c: Remove file.
* sysdeps/unix/sysv/linux/generic/wordsize-32/truncate.c: Likewise.
* sysdeps/sysv/linux/generic/wordsize-32/truncate64.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/truncate64.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/truncate64.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/truncate64.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/truncate64.c: Likewise.
* sysdeps/unix/sysv/linux/truncate.c: New file.
* sysdeps/unix/sysv/linux/truncate64.c (truncate64): Use
INLINE_SYSCALL_CALL, __ALIGNMENT_ARG and SYSCALL_LL64 macros.
* sysdeps/unix/sysv/linux/mips/mips64/syscalls.list (truncate):
Remove.
* sysdeps/unix/sysv/linux/wordsize-64/syscalls.list (truncate):
Likewise.
[1] https://sourceware.org/ml/libc-alpha/2016-08/msg00646.html
THis patch consolidates all Linux ftruncate implementation on
sysdeps/unix/sysv/linux/ftruncate{64}.c. It is based on
{INTERNAL,INLINE}_SYSCALL patch [1] to simplify the syscall construction.
General idea is to build ftruncate iff __OFF_T_MATCHES_OFF64_T is not
defined, otherwise ftruncate64 will be build and ftruncate will be an
alias. The fallocate will use old compat syscall and pass 32-bit off_t
argument, while fallocate64 will handle the correct off64_t passing using
__ALIGNMENT_ARG and SYSCALL_LL64 macros.
Tested on x86_64, i386, aarch64, and armhf.
* posix/tst-truncate-common.c: New file.
* posix/tst-truncate.c: Use tst-truncate-common.c.
* posix/tst-truncate64.c: Likewise and add LFS tests.
* sysdeps/unix/sysv/linux/arm/ftruncate64.c: Remove file.
* sysdeps/unix/sysv/linux/generic/wordsize-32/ftruncate.c: Likewise.
* sysdeps/unix/sysv/linux/generic/wordsize-32/ftruncate64.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/ftruncate64.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/ftruncate64.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/ftruncate64.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/ftruncate64.c: Likewise.
* sysdeps/unix/sysv/linux/ftruncate.c: New file.
* sysdeps/unix/sysv/linux/ftruncate64.c (__ftruncate64): Use
INLINE_SYSCALL_CALL, __ALIGNMENT_ARG and SYSCALL_LL64 macros.
[__OFF_T_MATCHES_OFF64_T] (ftruncate): Add alias.
* sysdeps/unix/sysv/linux/mips/mips64/syscalls.list (ftruncate):
Remove.
* sysdeps/unix/sysv/linux/wordsize-64/syscalls.list (ftruncate):
Likewise.
[1] https://sourceware.org/ml/libc-alpha/2016-08/msg00646.html
This patch adds a localplt.data file for sh so that test passes. The
architecture-specific entries are for _Unwind_Find_FDE, _exit and
__errno_location.
Tested for sh3 and sh4.
* sysdeps/unix/sysv/linux/sh/localplt.data: New file.
This patch adds a localplt.data file for hppa so that test passes.
Architecture maintainers should feel free to clean up the sysdeps code
so that some or all of the system-specific entries
libc.so: _exit
libc.so: __sigsetjmp
libc.so: _IO_funlockfile
libc.so: sigprocmask
libc.so: __errno_location
libpthread.so: __errno_location
are no longer needed.
Tested for hppa. Note: check-execstack and check-textrel still fail;
you may wish to look at those to get to a clean baseline there (they
are less obvious for people not familiar with the architecture).
* sysdeps/unix/sysv/linux/hppa/localplt.data: New file.
This patch updates alpha localplt.data so the localplt test passes in
my compile-only all-ABIs glibc testing. The failures I see without
this patch are:
Missing required PLT reference: ld.so: __tls_get_addr
Missing required PLT reference: ld.so: free
Now, __tls_get_addr can be made optional. For free, rather than
making it optional as in libc.so it seems better to mark all the
malloc-related symbols in both libc.so and ld.so as allowing an
R_ALPHA_GLOB_DAT relocation as an alternative to using a PLT entry, so
this patch does so.
Tested for alpha.
* sysdeps/unix/sysv/linux/alpha/localplt.data: Make __tls_get_addr
optional in ld.so. Allow R_ALPHA_GLOB_DAT relocation for malloc,
calloc, realloc, free, memalign and __libc_memalign rather than
making them optional.
This patch updates nios2 localplt.data so the localplt test passes in
my compile-only all-ABIs glibc testing. A new PLT entry for
__extendsfdf2 is added.
Tested for nios2.
* sysdeps/unix/sysv/linux/nios2/localplt.data: Add __extendsfdf2
for libc.so.
This patch consolidates all Linux lseek/lseek64/llseek implementation
in on on sysdeps/unix/sysv/linux/lseek{64}.c. It also removes the llseek
file and instead consolidate the LFS lseek implementation on lseek64.c
as for other LFS symbols implementations.
The general idea is:
- lseek: ABIs that not define __OFF_T_MATCHES_OFF64_T will preferable
use __NR__llseek if kernel supports it, otherwise they will use __NR_lseek.
ABIs that defines __OFF_T_MATCHES_OFF64_T won't produce any symbol.
- lseek64: ABIs with __OFF_T_MATCHES_OFF64_T will preferable use __NR_lseek
(since it will use 64-bit arguments without low/high splitting) and
__NR__llseek if __NR_lseek is not defined (for some ILP32 ports).
- llseek: files will be removed and symbols will be aliased ot lseek64.
ABI without __OFF_T_MATCHES_OFF64_T and without __NR_llseek (basically MIPS64n32
so far) are covered by building lseek with off_t as expected and lseek64
using __NR_lseek (as expected for off64_t being passed using 64-bit registers).
For this consolidation I mantained the x32 assembly specific implementation
because to correctly fix this it would required both the x32 fix for
{INLINE,INTERNAL}_SYSCALL [1] and a wrapper to correctly subscribe it to
return 64 bits instead of default 32 bits (as for times). It could a future
cleanup.
It is based on my previous {INTERNAL,INLINE}_SYSCALL_CALL macro [2],
although it is mainly for simplification.
Tested on x86_64, i686, aarch64, armhf, and powerpc64le.
* nptl/Makefile (libpthread-routines): Remove ptw-llseek and add
ptw-lseek64.
* sysdeps/unix/sysv/linux/Makefile (sysdeps_routines): Remove llseek.
* sysdeps/unix/sysv/linux/alpha/Makefile (sysdeps_routines):
Likewise.
* sysdeps/unix/sysv/linux/generic/wordsize-32/llseek.c: Remove file.
* sysdeps/unix/sysv/linux/generic/wordsize-32/lseek.c: Remove file.
* sysdeps/unix/sysv/linux/mips/mips64/llseek.c: Likewise.
* sysdeps/unix/sysv/linux/llseek.c: Remove file.
* sysdeps/unix/sysv/linux/lseek.c: New file.
* sysdeps/unix/sysv/linux/lseek64.c: Add default Linux implementation.
* sysdeps/unix/sysv/linux/mips/mips64/syscalls.list: Remove lseek and
__libc_lseek64 from auto-generation.
* sysdeps/unix/sysv/linux/wordsize-64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/lseek64.S: New file.
[1] https://sourceware.org/ml/libc-alpha/2016-08/msg00443.html
[2] https://sourceware.org/ml/libc-alpha/2016-08/msg00646.html
This patch adds the missing Linux sparc definitions from d060cd0.
Both value are copied from default sparc value [1] and with this
fix now both sparc 32 and 64 bits builds on Linux.
* sysdeps/unix/sysv/linux/sparc/bits/wordsize.h
(__WORDSIZE_TIME64_COMPAT32): Define for both 32 and 64 bits.
[1] sysdeps/sparc/sparc{32,64}/bits/wordsize.h
The check-installed-headers tests show up that the MIPS <sys/user.h>
is not self-contained, using size_t without including any header that
defines it. This patch fixes it by including <stddef.h>, as done for
other architectures' versions of this header.
Tested for MIPS (all 24 ABIs, compilation only).
* sysdeps/unix/sysv/linux/mips/sys/user.h: Include <stddef.h>.
This patch marks the check-execstack test as expected to fail for
MIPS, with a comment referencing previous RFC discussion of the
changes that would be needed to support non-executable stacks on MIPS.
Tested for MIPS (all 24 ABIs).
* sysdeps/unix/sysv/linux/mips/Makefile [$(subdir) = elf]
(test-xfail-check-execstack): New variable.
TS 18661-1 defines canonicalize functions to produce a canonical
version of a floating-point representation. This patch implements
these functions for glibc.
As with the iscanonical macro, these functions are oriented to the
decimal floating-point case, where some values have both canonical and
noncanonical representations. However, the functions have a return
value that says whether they succeeded in storing a canonical result;
thus, they can fail for the case of an invalid representation (while
still not making any particular choice from among multiple equally
canonical valid representations of the same value). Since no
floating-point formats in glibc actually have noncanonical valid
representations, a type-generic implementation of these functions can
be used that expects iscanonical to return 0 only for invalid
representations. Now that iscanonical is used within libm.so,
libm_hidden_proto / libm_hidden_def are added for __iscanonicall.
The definition of these functions is intended to correspond to a
convertFormat operation to the same floating-point format. Thus, they
convert signaling NaNs to quiet NaNs, raising the "invalid" exception.
Such a conversion "should" produce "the canonical version of that
signaling NaN made quiet".
libm-test.inc is made to check NaN payloads for the output of these
functions, a new feature (at some point manipulation functions such as
fabs and copysign should have tests added that verify payload
preservation for them). As however some architectures may not follow
the recommended practice of preserving NaN payloads when converting a
signaling NaN to quiet, a new math-tests.h macro
SNAN_TESTS_PRESERVE_PAYLOAD is added, and defined to 0 for non-NAN2008
MIPS; any other architectures seeing test failures for lack of payload
preservation in this case should also define this macro to 0. (If any
cases arise where the sign isn't preserved either, those should have a
similar macro added.)
The ldbl-96 and ldbl-128ibm tests of iscanonical are renamed and
adapted to test canonicalizel as well on the same representations.
Tested for x86_64, x86, mips64 and powerpc.
* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(canonicalize): New declaration.
* math/Versions (canonicalize): New libm symbol at version
GLIBC_2.25.
(canonicalizef): Likewise.
(canonicalizel): Likewise.
* math/Makefile (gen-libm-calls): Add s_canonicalizeF.
* math/s_canonicalize_template.c: New file.
* math/libm-test.inc: Update comment on functions tested and
testing of NaN payloads.
(TEST_NAN_PAYLOAD): New macro.
(NO_TEST_INLINE): Update value.
(XFAIL_TEST): Likewise.
(ERRNO_UNCHANGED): Likewise.
(ERRNO_EDOM): Likewise.
(ERRNO_ERANGE): Likewise.
(IGNORE_RESULT): Likewise.
(NON_FINITE): Likewise.
(TEST_SNAN): Likewise.
(NO_TEST_MATHVEC): Likewise.
(TEST_NAN_PAYLOAD_CANONICALIZE): New macro.
(check_float_internal): Check NaN payloads if TEST_NAN_PAYLOAD.
(struct test_Ffp_b1_data): New type.
(RUN_TEST_Ffp_b1): New macro.
(RUN_TEST_LOOP_Ffp_b1): Likewise.
(canonicalize_test_data): New array.
(canonicalize_test): New function.
(main): Call canonicalize_test.
* manual/arith.texi (FP Bit Twiddling): Document canonicalize,
canonicalizef and canonicalizel.
* manual/libm-err-tab.pl: Update comment on interfaces without
ulps tabulated.
* sysdeps/ieee754/ldbl-opt/nldbl-canonicalize.c: New file.
* sysdeps/ieee754/ldbl-opt/s_canonicalizel.c: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
canonicalize.
(CFLAGS-nldbl-canonicalize.c): New variable.
* sysdeps/ieee754/ldbl-128ibm/test-iscanonical-ldbl-128ibm.c: Move
to ...
* sysdeps/ieee754/ldbl-128ibm/test-canonical-ldbl-128ibm.c:
... here.
(do_test): Also test canonicalizel.
* sysdeps/ieee754/ldbl-128ibm/Makefile (tests): Change
test-iscanonical-ldbl-128ibm to test-canonical-ldbl-128ibm.
* sysdeps/ieee754/ldbl-128ibm/include/bits/iscanonical.h: New
file.
* sysdeps/ieee754/ldbl-128ibm/s_iscanonicall.c (__iscanonicall):
Use libm_hidden_def.
* sysdeps/ieee754/ldbl-96/test-iscanonical-ldbl-96.c: Move to ...
* sysdeps/ieee754/ldbl-96/test-canonical-ldbl-96.c: ... here.
(do_test): Also test canonicalizel.
* sysdeps/ieee754/ldbl-96/Makefile (tests): Change
test-iscanonical-ldbl-96 to test-canonical-ldbl-96.
* sysdeps/ieee754/ldbl-96/include/bits/iscanonical.h: New file.
* sysdeps/ieee754/ldbl-96/s_iscanonicall.c (__iscanonicall): Use
libm_hidden_def.
* sysdeps/generic/math-tests.h (SNAN_TESTS_PRESERVE_PAYLOAD): New
macro.
* sysdeps/mips/math-tests.h [__mips_hard_float && !__mips_nan2008]
(SNAN_TESTS_PRESERVE_PAYLOAD): Likewise.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
ISO/IEC TS 18661-1 adds several functions in the strfrom family to stdlib.
This patch adds strfromd, strfromf, and strfroml. This is being done in
preparation for the new floating-point type, float128. The added functions
convert a floating-point value into a string, with configurable format.
Although conceptually correct for p{read,write}{64} offset argument passing,
sh4 implementation does not generate the correct expected code. The
__ALIGNMENT_ARG redefinition is incorrect for two reasons: 1. the
kernel-features.h header is included multiple times (since it contains no
guards) and 2. the value it redefines is also incorrect (should be '0, '
instead of empty definition).
This patch fixes it by adding another macro, SYSCALL_LL_PRW{64}, meant to be
used to pass the offset argument on p{read,write}64. It is basically the
already define SYSCALL_LL{64} plus __ALIGNMENT_ARG unless __ASSUME_PRW_DUMMY_ARG
is define. In this case an empty dummy argument is used regardless how
__ALIGNMENT_ARG is defined (sh4 case).
Checked on x86_64, i686, aarch64, armhf, and powerpc64le (basically a sanity
check). Also, John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> and
James Clarke <jrtc27@jrtc27.com> help me check on a debian sh4 bootstrap using
2.24 plus this patch to verify it also corrected fixed the regression issue.
I also verified the generated object for a 2.24 build and master with this
patch for sh4 and both look identical.
* sysdeps/unix/sysv/linux/pread.c (__libc_pread): Use SYSCALL_LL_PRW.
* sysdeps/unix/sysv/linux/pwrite.c (__libc_pwrite): Likewise.
* sysdeps/unix/sysv/linux/pread64.c (__libc_pread64): Use
SYSCALL_LL64_PRW.
* sysdeps/unix/sysv/linux/pwrite64.c (__libc_pwrite64): Likewise.
* sysdeps/unix/sysv/linux/sh/kernel-features.h: Define
__ASSUME_PRW_DUMMY_ARG.
* sysdeps/unix/sysv/linux/sh/pread.c: Remove file.
* sysdeps/unix/sysv/linux/sh/pread64.c: Likewise.
* sysdeps/unix/sysv/linux/sh/pwrite.c: Likewise.
* sysdeps/unix/sysv/linux/sh/pwrite64.c: Likewise.
* sysdeps/unix/sysv/linux/sysdep.h: Define SYSCALL_LL_PRW and
SYSCALL_LL_PRW64 based on __ASSUME_PRW_DUMMY_ARG.
TS 18661-1 defines functions for manipulating the payloads of NaNs.
This patch implements the getpayload functions for glibc; these
extract the NaN payload (from an argument passed as a pointer, for
which corresponding libm-test support is added) and return it in the
same floating-point type. The return value of these functions is
unspecified for non-NaN arguments; the patch does the simplest thing
to implement, which is that the functions do not check whether the
argument is a NaN and just treat the relevant bits of the
representation as a payload regardless. A conversion from integer to
floating-point is used to produce the required return value, except in
the ldbl-128 case; as 128-bit integers are not supported for all
configurations using ldbl-128, the code constructs the required
floating-point representation of the return value directly instead.
Tested for x86_64, x86, mips64 and powerpc.
* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(getpayload): New declaration.
* math/Versions (getpayload): New libm symbol at version
GLIBC_2.25.
(getpayloadf): Likewise.
(getpayloadl): Likewise.
* math/Makefile (libm-calls): Add s_getpayloadF.
* math/libm-test.inc: Include <nan-high-order-bit.h>.
(struct test_f_f_data): Add comment.
(RUN_TEST_fp_f): New macro.
(RUN_TEST_LOOP_fp_f): Likewise.
(getpayload_test_data): New array.
(getpayload_test): New function.
(main): Call getpayload_test.
* math/gen-libm-test.pl (parse_args): Handle 'p' in argument
descriptor.
* manual/arith.texi (FP Bit Twiddling): Document getpayload,
getpayloadf and getpayloadl.
* manual/libm-err-tab.pl: Update comment on interfaces without
ulps tabulated.
* sysdeps/ieee754/dbl-64/s_getpayload.c: New file.
* sysdeps/ieee754/dbl-64/wordsize-64/s_getpayload.c: Likewise.
* sysdeps/ieee754/flt-32/s_getpayloadf.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_getpayloadl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_getpayloadl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_getpayloadl.c: Likewise.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
The fallocate syscall might fail on Linux due missing support from
underlying filesystem (for instance some NFS versions). This patch
adds this check for fallocate tests. It also moves tst-fallocate{64}
to 'io' folder (since it is on fallocate{64} is built).
Checked on x86_64.
* sysdeps/unix/sysv/linux/Makefile [$(subdir) = math] (tests): Move
tst-fallocate{64}.
* sysdeps/unix/sysv/linux/tst-fallocate-common.c: Check for EOPNOTSUPP
on syscall return.
Recent binutils versions (at least 2.27) complains about libc.so
when linking sotruss-lib.so with:
libc.so:(*IND*+0x0): multiple definition of `posix_fadvise64@GLIBC_2.2'
libc.so::(.text+0xcf940): first defined here
libc.so:(*IND*+0x0): multiple definition of `posix_fadvise64'
collect2: error: ld returned 1 exit status
Dynamic symbols for libc.so shows (readelf --dyn-syms):
262: 000000000010b950 28 FUNC GLOBAL DEFAULT 12 posix_fadvise64@GLIBC_2.2
417: 000000000010b950 28 FUNC WEAK DEFAULT 12 posix_fadvise64@@GLIBC_2.2
1505: 000000000010b950 28 FUNC GLOBAL DEFAULT 12 posix_fadvise64@@GLIBC_2.3.3
That is, two separate definitions at version GLIBC_2.2. The issue is
sysdeps/unix/sysv/linux/posix_fadvise64.c creates posix_fadvise64 weak_alias,
while sysdeps/unix/sysv/linux/mips/mips64/n64/posix_fadvise64.c then adds
compat_symbol / versioned_symbol calls.
The patch remove the weak_alias definition on mips64 specific version so
direct weak_alias is disabled.
Checked on mips64n64 build with binutils 2.27.51.20161012.
* sysdeps/unix/sysv/linux/mips/mips64/n64/posix_fadvise64.c:
Undefine weak_alias.
TS 18661-1 defines totalorder functions implementing the totalOrder
comparison operation from IEEE 754-2008. This patch implements these
functions for glibc, including the type-generic macro in <tgmath.h>.
(The totalordermag functions will be added in a separate patch.)
The description of the totalOrder operation is complicated. However,
for IEEE interchange binary formats and the preferred quiet NaN
convention, what that complicated description means is that you
interpret the representation as a sign-magnitude integer (with -0
coming before +0) and do a <= comparison on that interpretation. For
finite values and infinities the ordering of the sign-magnitude
integers is just the same as the ordering of floating-point values, so
this extends that to all representations. (Different representations
of the same floating-point value - which includes same quantum in the
decimal case - must still be considered equal by this operation, but
that issue doesn't arise for IEEE interchange binary formats.) So the
complications are:
* When MIPS quiet NaN conventions are in use, the representation of
NaNs needs adjusting before making such an integer comparison. This
patch does this adjustment only when both arguments are NaNs, as
there's no need for it if only one is a NaN, and as long as both are
NaNs you can just flip the relevant bits without any problems from
this turning a NaN into an infinity.
* For the m68k version of ldbl-96, where the high mantissa bit is
"don't care" for infinities and NaNs, representations where it
differs must compare the same. Note: although the testcase for this
compiles, I have not actually tested on m68k.
* For ldbl-128ibm, the low part must be ignored when the high part is
NaN, and low parts of +0 and -0 must be considered the same whatever
the high part.
The new tests in libm-test.inc are the first tests there specifying
particular payloads for input NaNs. Separate tests are also added for
the ldbl-96 and ldbl-128ibm special cases where there are different
representations of the same value that must compare equal (which can't
be covered in libm-test.inc as that only specifies values, not
representations).
Tested for x86_64, x86, mips64 and powerpc.
* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(totalorder): New declaration.
* math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder):
New macro.
* math/Versions (totalorder): New libm symbol at version
GLIBC_2.25.
(totalorderf): Likewise.
(totalorderl): Likewise.
* math/Makefile (libm-calls): Add s_totalorderF.
* math/gen-libm-test.pl (parse_args): Escape quotes in test name
string.
* math/libm-test.inc (PAYLOAD_DIG): New macro.
(qnan_value_pl): Likewise.
(snan_value_pl): Likewise.
(qnan_value): Define using qnan_value_pl.
(snan_value): Define using snan_value_pl.
(struct test_ff_i_data): Add comment about which tests use this
structure.
(RUN_TEST_ff_b): New macro.
(RUN_TEST_LOOP_ff_b): Likewise.
(totalorder_test_data): New array.
(totalorder_test): New function.
(main): Call totalorder_test.
* math/test-tgmath.c (NCALLS): Increase to 122.
(F(compile_test)): Call totalorder.
(F(totalorder)): New function.
* manual/arith.texi (FP Comparison Functions): Document
totalorder, totalorderf and totalorderl.
* manual/libm-err-tab.pl: Update comment on interfaces without
ulps tabulated.
* sysdeps/ieee754/dbl-64/s_totalorder.c: New file.
* sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c: Likewise.
* sysdeps/ieee754/flt-32/s_totalorderf.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_totalorderl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_totalorderl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_totalorderl.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-totalorder.c: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
totalorder.
(CFLAGS-nldbl-totalorder.c): New variable.
* sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c: New
file.
* sysdeps/ieee754/ldbl-128ibm/Makefile [$(subdir) = math] (tests):
Add test-totalorderl-ldbl-128ibm.
* sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c: New file.
* sysdeps/ieee754/ldbl-96/Makefile [$(subdir) = math] (tests): Add
test-totalorderl-ldbl-96.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
This patch consolidates all the sync_file_range implementation for Linux
in only one (sysdeps/unix/sysv/linux/sync_file_range.c). It also removes
the syscall from the auto-generation using assembly macros (except for
x86_64 due x32 [1]).
For current minimum supported kernel (2.6.32 for x86_64 and 3.2 for all
other architectures) either sync_file_range or sync_file_range2 is supported
and it is expected that any future Linux ABI will provide either of one
syscall. So the code path that returns ENOSYS in the case of missing
syscall is removed.
Checked on x86_64, i386, powerpc64le, aarch64, and armhf.
* sysdeps/unix/sysv/linux/Makefile (tests): Add tst-sync_file_range.
* sysdeps/unix/sysv/linux/mips/mips32/sync_file_range.c: Remove file.
* sysdeps/sysv/linux/powerpc/powerpc64/sync_file_range.c: Likewise.
* sysdeps/unix/sysv/linux/sync_file_range.c: New file.
* sysdeps/unix/sysv/linux/tst-sync_file_range.c (sync_file_range):
Consolidate all Linux implementations.
[1] https://patchwork.ozlabs.org/patch/659794/
This patch consolidates mostly of the Linux posix_fadvise{64} implementations
on sysdeps/unix/sysv/linux/posix_fadvise{64}.c. It still keeps arch-specific
files for:
* S390-32: it uses a packed structure to pass all the arguments on syscall.
It is the only supported port that implements __NR_fadvise64_64 in this
way.
* ARM: it does not implement __NR_fadvise64 (as other 32-bits ports), so
posix_fadvise calls internal posix_fadvise64 symbol.
* MIPS64 n64: it requires a different version number that other ports.
The new macro SYSCALL_LL{64} is used to handle the offset argument and
INTERNAL_SYSCALL_CALL to handle passing the correct number of expect
arguments.
The default Linux adds two new defines a port can use to control how
__NR_fadvise64_64 passes the kernel arguments:
* __ASSUME_FADVISE64_64_6ARG: the 'advise' argument is moved on second
position. This is the case of powerpc32 and arm to avoid implement
7 argument syscall.
* __ASSUME_FADVISE64_64_NO_ALIGN: for ABIs that defines
__ASSUME_ALIGNED_REGISTER_PAIRS packs the offset without the leading
'0'. This is the case of tile 32 bits.
ARM also defines __NR_fadvise64_64 as __NR_arm_fadvise64_64 (which is also
handled on arch kernel-feature.h).
Tested on x86_64, x32, i686, armhf, and aarch64.
* posix/Makefile (tests): Add tst-posix_fadvise and tst-posix_fadvise64.
* posix/tst-posix_fadvise.c: New file.
* posix/tst-posix_fadvise64.c: Likewise.
* posix/tst-posix_fadvise-common.c: Likewise.
* sysdeps/unix/sysv/linux/arm/kernel-features.h
(__ASSUME_FADVISE64_64_6ARG): Define.
* sysdeps/unix/sysv/linux/powerpc/kernel-features.h
[!__powerpc64__] (__ASSUME_FADVISE64_64_6ARG): Add define.
* sysdeps/unix/sysv/linux/arm/posix_fadvise64.c: Remove file.
* sysdeps/unix/sysv/linux/generic/wordsize-32/posix_fadvise.c: Likewise.
* sysdeps/unix/sysv/linux/i386/posix_fadvise64.S: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/posix_fadvise.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/posix_fadvise64.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/posix_fadvise.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/posix_fadvise64.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/posix_fadvise.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/posix_fadvise.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/posix_fadvise64.c:
Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/posix_fadvise.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/posix_fadvise64.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/posix_fadvise64.c
(SHLIB_COMPAT(libc, GLIBC_2_2, GLIBC_2_3_3) [__posix_fadvise64_l64]:
Alias to __posix_fadvise64_l32.
(SHLIB_COMPAT(libc, GLIBC_2_2, GLIBC_2_3_3) [__posix_fadvise64_l32]:
Add compat definition to posix_fadvise64.
(SHLIB_COMPAT(libc, GLIBC_2_2, GLIBC_2_3_3) [__posix_fadvise64_l64]:
Add versioned definition to posix_fadvise64.
* sysdeps/unix/sysv/linux/posix_fadvise.c (posix_fadvise): Build iff
__OFF_T_MATCHES_OFF64_T is defined, use INTERNAL_SYSCALL_CALL, add
__ASSUME_FADVISE64_64_6ARG/__ASSUME_FADVISE64_64_NO_ALIGN support.
* sysdeps/unix/sysv/linux/posix_fadvise64.c (posix_fadvise64): Add
__ASSUME_FADVISE64_64_NO_ALIGN support and use INTERNAL_SYSCALL_CALL.
This patch consolidates all the posix_fallocate{64} implementation for Linux
in only one (sysdeps/unix/sysv/linux/posix_fallocate{64}.c). It also removes
the syscall from the auto-generation using assembly macros.
The macro SYSCALL_LL{64} is used to handle the offset argument along with
the new INTERNAL_SYSCALL_CALL macro to define correct argument count for
internal INTERNAL_SYSCALL call.
Tested on x86_64, i686, x32, aarch64, ppc64le, and armhf.
* io/Makefile (tests): Add tst-posix_fallocate and
tst-posix_fallocate64.
* io/tst-posix_fallocate-common.c: New file.
* io/tst-posix_fallocate.c: Likewise.
* io/tst-posix_fallocate64.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/posix_fallocate.c: Remove
file.
* sysdeps/unix/sysv/linux/mips/mips64/n32/posix_fallocate64.c:
Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/posix_fallocate.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/posix_fallocate64.c:
Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/posix_fallocate.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/posix_fallocate64.c: Likewise.
* sysdeps/unix/sysv/linux/posix_fallocate.c (posix_fallocate): Use
SYSCALL_LL to pass both offset and len arguments.
* sysdeps/unix/sysv/linux/posix_fallocate64.c (posix_fallocate64):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/syscalls.list (pwrite64): Add
__libc_pwrite64 alias used by posix_fallocate64.
This patch consolidates all the fallocate{64} implementation for Linux
in only one (sysdeps/unix/sysv/linux/fallocate{64}.c). It also removes the
syscall from the auto-generation using assembly macros.
The new macro SYSCALL_LL{64} is used to handle the offset argument.
Checked on x86_64, x32, i386, aarch64, and ppc64le.
* sysdeps/unix/sysv/linux/Makefile (test): Add tst-fallocate and
tst-fallocate64.
* sysdeps/unix/sysv/linux/tst-fallocate.c: New file.
* sysdeps/unix/sysv/linux/tst-fallocate64.c: Likewise.
* sysdeps/unix/sysv/linux/tst-fallocate-common.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/fallocate.c: Remove file.
* sysdeps/unix/sysv/linux/mips/mips64/n32/fallocate64.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/fallocate.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/fallocate64.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/fallocate.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/fallocate64.c: Likewise.
* sysdeps/unix/sysv/linux/fallocate.c (fallocate): Use SYSCALL_LL
macro on offset argument.
* sysdeps/unix/sysv/linux/fallocate64.c (fallocate64): Use
SYSCALL_LL64 on offset argument.
* test-skeleton.c (FAIL_RET): Add macro.
(FAIL_EXIT): Likewise.
(FAIL_EXIT1): Likewise.
(_FAIL): Likewise.
This patch uses the libc_ifunc macro to create already existing ifunc functions
longjmp_ifunc, siglongjmp_ifunc if HAVE_IFUNC is defined.
The s390 pt-longjmp.c includes the common pt-longjmp.c and uses strong_alias
to create the longjmp, siglongjmp symbols for glibc version 2.19.
ChangeLog:
* nptl/pt-longjmp.c (DEFINE_LONGJMP): Use libc_ifunc macro.
* sysdeps/unix/sysv/linux/s390/pt-longjmp.c (longjmp, siglongjmp):
Use strong_alias to create symbols for glibc verison 2.19.
This patch uses the libc_ifunc_hidden macro to create already existing ifunc functions
time and gettimeofday on power. This way, the libc_hidden_def macro can be used
instead of inline assemblies.
On ppc32, the __GI_* symbols do not target the ifunc symbol and thus the
redirection construct has to be applied here.
ChangeLog:
* sysdeps/unix/sysv/linux/powerpc/gettimeofday.c (__gettimeofday):
Use libc_ifunc_hidden and libc_hidden_def macro. Redirect ifunced function
in header for using it as type for ifunc function because __GI_* symbols
for ppc32 do not target the ifunc symbols.
* sysdeps/unix/sysv/linux/powerpc/time.c (time): Likewise.
This patch uses the libc_ifunc_hidden macro to create already existing ifunc functions
time and gettimeofday on intel. This way, the libc_hidden_def macro can be used
instead of the libc_ifunc_hidden_def one which was only used here. Thus the
macro is removed from libc-symbols.h.
On i386, the __GI_* symbols do not target the ifunc symbol and thus the
redirection construct has to be applied here.
ChangeLog:
* sysdeps/unix/sysv/linux/x86/gettimeofday.c (__gettimeofday):
Use libc_ifunc_hidden macro. Use libc_hidden_def instead of
libc_ifunc_hidden_def.
* sysdeps/unix/sysv/linux/x86/time.c (time): Likewise.
* sysdeps/unix/sysv/linux/i386/gettimeofday.c (__gettimeofday):
Redirect ifunced function in header for using it as type of ifunc'ed
function. Redefine libc_hidden_def to use fallback non ifunc'ed
function for __GI_* symbol.
* sysdeps/unix/sysv/linux/i386/time.c (time): Likewise.
* include/libc-symbols.h
(libc_ifunc_hidden_def, libc_ifunc_hidden_def1): Delete macro.
TS 18661-1 adds an iseqsig type-generic comparison macro to <math.h>.
This macro is like the == operator except that unordered operands
result in the "invalid" exception and errno being set to EDOM.
This patch implements this macro for glibc. Given the need to set
errno, this is implemented with out-of-line functions __iseqsigf,
__iseqsig and __iseqsigl (of which the last only exists at all if long
double is ABI-distinct from double, so no function aliases or compat
support are needed). The present patch ignores excess precision
issues; I intend to deal with those in a followup patch. (Like
comparison operators, type-generic comparison macros should *not*
convert operands to their semantic types but should preserve excess
range and precision, meaning that for some argument types and values
of FLT_EVAL_METHOD, an underlying function should be called for a
wider type than that of the arguments.)
The underlying functions are implemented with the type-generic
template machinery. Comparing x <= y && x >= y is sufficient in ISO C
to achieve an equality comparison with "invalid" raised for unordered
operands (and the results of those two comparisons can also be used to
tell whether errno needs to be set). However, some architectures have
GCC bugs meaning that unordered comparison instructions are used
instead of ordered ones. Thus, a mechanism is provided for
architectures to use an explicit call to feraiseexcept to raise
exceptions if required. If your architecture has such a bug you
should add a fix-fp-int-compare-invalid.h header for it, with a
comment pointing to the relevant GCC bug report; if such a GCC bug is
fixed, that header's contents should have a __GNUC_PREREQ conditional
added so that the workaround can eventually be removed for that
architecture.
Tested for x86_64, x86, mips64, arm and powerpc.
* math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (iseqsig): New
macro.
* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(__iseqsig): New declaration.
* math/s_iseqsig_template.c: New file.
* math/Versions (__iseqsigf): New libm symbol at version
GLIBC_2.25.
(__iseqsig): Likewise.
(__iseqsigl): Likewise.
* math/libm-test.inc (iseqsig_test_data): New array.
(iseqsig_test): New function.
(main): Call iseqsig_test.
* math/Makefile (gen-libm-calls): Add s_iseqsigF.
* manual/arith.texi (FP Comparison Functions): Document iseqsig.
* manual/libm-err-tab.pl: Update comment on interfaces without
ulps tabulated.
* sysdeps/generic/fix-fp-int-compare-invalid.h: New file.
* sysdeps/powerpc/fpu/fix-fp-int-compare-invalid.h: Likewise.
* sysdeps/x86/fpu/fix-fp-int-compare-invalid.h: Likewise.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
Fix powerpc-specific headers:
- Make it compatible to C89 by replace references to inline by __inline__.
- Get the definition of sigset_t used by
sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h.
- Includes missing header file.
TS 18661-1 adds an iscanonical classification macro to <math.h>.
The motivation for this is decimal floating-point, where some values
have both canonical and noncanonical encodings. For IEEE binary
interchange formats, all encodings are canonical. For x86/m68k
ldbl-96, and for ldbl-128ibm, there are encodings that do not
represent any valid value of the type; although formally iscanonical
does not need to handle trap representations (and so could just always
return 1), it seems useful, and in line with the description in the TS
of "representations that are extraneous to the floating-point model"
as being non-canonical (as well as "redundant representations of some
or all of its values"), for it to detect those representations and
return 0 for them.
This patch adds iscanonical to glibc. It goes in a header
<bits/iscanonical.h>, included under appropriate conditions in
<math.h>. The default header version just evaluates the argument
(converted to its semantic type, though current GCC will probably
discard that conversion and any exceptions resulting from it) and
returns 1. ldbl-96 and ldbl-128ibm then have versions of the header
that call a function __iscanonicall for long double (the sizeof-based
tests will of course need updating for float128 support, like other
such type-generic macro implementations). The ldbl-96 version of
__iscanonicall has appropriate conditionals to reflect the differences
in the m68k version of that format (where the high mantissa bit may be
either 0 or 1 when the exponent is 0 or 0x7fff). Corresponding tests
for those formats are added as well. Other architectures do not have
any new functions added because just returning 1 is correct for all
their floating-point formats.
Tested for x86_64, x86, mips64 (to test the default macro version) and
powerpc.
* math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Include
<bits/iscanonical.h>.
* bits/iscanonical.h: New file.
* math/s_iscanonicall.c: Likewise.
* math/Versions (__iscanonicall): New libm symbol at version
GLIBC_2.25.
* math/libm-test.inc (iscanonical_test_data): New array.
(iscanonical_test): New function.
(main): Call iscanonical_test.
* math/Makefile (headers): Add bits/iscanonical.h.
(type-ldouble-routines): Add s_iscanonicall.
* manual/arith.texi (Floating Point Classes): Document
iscanonical.
* manual/libm-err-tab.pl: Update comment on interfaces without
ulps tabulated.
* sysdeps/ieee754/ldbl-128ibm/bits/iscanonical.h: New file.
* sysdeps/ieee754/ldbl-128ibm/s_iscanonicall.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/test-iscanonical-ldbl-128ibm.c:
Likewise.
* sysdeps/ieee754/ldbl-128ibm/Makefile (tests): Add
test-iscanonical-ldbl-128ibm.
* sysdeps/ieee754/ldbl-96/bits/iscanonical.h: New file.
* sysdeps/ieee754/ldbl-96/s_iscanonicall.c: Likewise.
* sysdeps/ieee754/ldbl-96/test-iscanonical-ldbl-96.c: Likewise.
* sysdeps/ieee754/ldbl-96/Makefile: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Update.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
On posix_spawn open file action (issued by posix_spawn_file_actions_addopen)
POSIX states that if fildes was already an open file descriptor, it shall be
closed before the new file is openedi [1]. This avoid pontential issues when
posix_spawn plus addopen action is called with the process already at maximum
number of file descriptor opened and also for multiple actions on single-open
special paths (like /dev/watchdog).
This fixes its behavior on Linux posix_spawn implementation and also adds
a tests to check for its behavior.
Checked on x86_64.
* posix/Makefile (tests): Add tst-spawn3.
* posix/tst-spawn3.c: New file.
* sysdeps/unix/sysv/linux/spawni.c (__spawni_child): Close file descriptor
if it is already opened for open action.
[1] http://pubs.opengroup.org/onlinepubs/9699919799/functions/posix_spawn_file_actions_addclose.html
Using CLONE_VFORK already ensures that the parent does not run until the
child has either exec'ed succesfully or called _exit. Hence we don't
need to read from a CLOEXEC pipe to ensure proper synchronization - we
just make explicit use of the fact the the child and parent run in the
same VM, so the child can write an error code to a field of the
posix_spawn_args struct instead of sending it through a pipe.
To ensure that this mechanism really works, the parent initializes the
field to -1 and the child writes 0 before execing.
This eliminates some annoying bookkeeping that is necessary to avoid
the file actions from clobbering the write end of the pipe, and
getting rid of the pipe creation in the first place means fewer system
calls (four in the parent, usually one in the child) and fewer
chanches for the spawn to fail (e.g. if we're close to EMFILE).
Checked on x86_64 and i686.
* sysdeps/unix/sysv/linux/spawni.c (posix_spawn_args): Remove pipe
field, add err field.
(__spawni_child): Report error through err member instead of pipe.
(__spawnix): Likewise.
