Initially based on the versions found in wcsmbs/* ; these files have
been changed by hand unrolling, and adding some additional variables
to allow some read-ahead to occur, which then relieves some of the
wait-for-increment/wait-for-load/wait-for-compare-results pressure
that was slowing down every iteration through the while-loop.
For 64-bit Power7, These changes give an approx 20% throughput boost
for the wcschr and wcsrchr functions; and approx 40% boost for the
wcscpy function. 32-bit improvements appear to be slightly better
with ~ %30 and ~ %45 respectively. Results for Power6 closely match
those for power7.
Assorted tweaking, twisting and tuning to squeeze a few additional cycles
out of the memchr code. Changes include bypassing the shift pairs
(sld,srd) when they are not required, and unrolling the small_loop that
handles short and trailing strings.
Per scrollpipe data measuring aligned strings for 64-bit, these changes
save between five and eight cycles (9-13% overall) for short strings (<32),
Longer aligned strings see slight improvement of 1-3% due to bypassing the
shifts and the instruction rearranging.
In the past the "-ftree-loop-linear" switch provided a measurable
improvement in performance for certain functions. At some point it
was assigned as the responsibility of Graphite in GCC. It has been
found that even with Graphite enabled these flags no longer perform
any appreciable improvement over the baseline.
Graphite now has some open bugs which need to be fixed in order for it
to provide measurable performance improvements but it lacks active
development. As a result some compiler distributors may disable
Graphite. If Graphite is disabled then building GLIBC will fail if
the "-ftree-loop-linear" switch is used.
This patch removes the use of "-ftree-loop-linear" as unnecessary.
This patch provides optimized logb (1.2x on PPC32 and 2.5x on PPC64),
logbf (1.1x on PPC32 and 2.2x on PPC64), and logbl (1.3x on PPC32 and
50% on PPC64) for the POWER7 processor.
* sysdeps/powerpc/powerpc32/crti.S: New file.
* sysdeps/powerpc/powerpc32/crtn.S: New file.
* sysdeps/powerpc/powerpc64/crti.S: New file.
* sysdeps/powerpc/powerpc64/crtn.S: New file.
This patch tries to organize the implies files for ppc, since there are
a number of processors and most of them are compatible with each other
(backwards compatible).
Having in mind that we start the search for processor-specific files in
the sysdeps/unix/sysv/linux tree
(sysdeps/unix/sysv/linux/powerpc/powerpc[32|64]/[processor]/fpu to be
exact), we would like to grab any linux-specific code from that tree
prior to going through the other tree (sysdeps/powerpc/...).
For that, i removed the Implies files that were originally inside the
fpu directories and placed then in the non-fpu directories (still inside
the unix/sysv/linux tree). If no processor-specific/linux-specific files
could be found, we "imply" the other tree's (sysdeps/powerpc/...) fpu
directory for that specific processor AND also the non-fpu directory for
that same tree.
If, again, no processor-specific code is found, we read another Implies
file that will point to the most compatible processor that we should
grab code from, and so on, until we reach the power4 processor.
So, in summary, the Implies files will live inside these directories
now:
* sysdeps/unix/sysv/linux/powerpc/powerpc[32|64]/[processor]
* sysdeps/powerpc/powerpc[32|64]/[processor]
Practical example of the order we will use to pick power6-specific code
with the new structure.
sysdeps/unix/sysv/linux/powerpc/powerpc[32|64]/power6/fpu ->
sysdeps/unix/sysv/linux/powerpc/powerpc[32|64]/power6 ->
sysdeps/powerpc/powerpc[32|64]/power6/fpu ->
sysdeps/powerpc/powerpc[32|64]/power6 ->
sysdeps/powerpc/powerpc[32|64]/power5+/fpu ->
sysdeps/powerpc/powerpc[32|64]/power5+ ->
sysdeps/powerpc/powerpc[32|64]/power5/fpu ->
sysdeps/powerpc/powerpc[32|64]/power5 ->
sysdeps/powerpc/powerpc[32|64]/power4/fpu ->
sysdeps/powerpc/powerpc[32|64]/power4 (from here, it'll go to the
generic path as usual)
2008-11-13 Ryan S. Arnold <rsa@us.ibm.com>
[BZ #6411]
* sysdeps/powerpc/fpu/Makefile: Added test case tst-setcontext-fpscr.
* sysdeps/powerpc/fpu/feholdexcpt.c (_FPU_MASK_ALL): Define to replace
magic numbers.
* sysdeps/powerpc/fpu/fenv_libc.h (fesetenv_register): Dynamically
choose mtfsf insn based on PPC_FEATURE_HAS_DFP.
(relax_fenv_state): Same as above.
(FPSCR_29): Reserve bit in ISA 2.05.
(FPSCR_NI): Provide define for compat.
* sysdeps/powerpc/fpu/fesetenv.c (_FPU_MASK_ALL): Define to replace
magic numbers.
* sysdeps/powerpc/fpu/feupdateenv.c (_FPU_MASK_ALL): Define to replace
magic numbers.
* sysdeps/powerpc/fpu/tst-setcontext-fpscr.c: New file. Test case to
test setcontext and swapcontext with dynamic 64-bit FPSCR detection.
* sysdeps/powerpc/powerpc32/fpu/__longjmp-common.S (__longjmp): Adjust
access to hwcap to account for hwcap size increase to uint64_t.
* sysdeps/powerpc/powerpc32/fpu/setjmp-common.S (__sigsetjmp ):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/getcontext-common.S
(*setcontext): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/power6/fpu/setcontext.S:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/power6/fpu/swapcontext.S:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/setcontext-common.S
(*setcontext): dynamically select mtfsf insn based on
PPC_FEATURE_HAS_DFP. Adjust access to hwcap to account for hwcap size
increase to uint64_t.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/swapcontext-common.S
(*swapcontext): dynamically select mtfsf insn based on
PPC_FEATURE_HAS_DFP. Adjust access to hwcap to account for hwcap size
increase to uint64_t.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/power6/fpu/setcontext.S:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/power6/fpu/swapcontext.S:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/setcontext.S
(*setcontext): dynamically select mtfsf insn based on
PPC_FEATURE_HAS_DFP.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/swapcontext.S
(*swapcontext): dynamically select mtfsf insn based on
PPC_FEATURE_HAS_DFP.
* sysdeps/powerpc/powerpc32/fpu/s_lround.S (__lround): Fixed erroneous
result when x is +/-nextafter(+/-0.5,-/+1) i.e. all 1's in the
mantissa.
* sysdeps/powerpc/powerpc32/power4/fpu/s_llround.S (__llround):
Likewise. Also account for when x is an odd number between 2^52
and 2^53-1.
* sysdeps/powerpc/powerpc64/fpu/s_llround.S (__llround): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_llroundf.S (__llroundf): Likewise.
* math/libm-test.inc (lround_test, llround_test): Added test cases to
detect aforementioned erroneous conditions.
* sysdeps/powerpc/powerpc32/power4/hp-timing.h: New file.
* sysdeps/powerpc/powerpc64/hp-timing.h [_ARCH_PWR4] (HP_TIMING_NOW):
For ISA 2.01 and later replace mftb with mfspr 268.
* sysdeps/i386/i686/memcpy.S: Optimize copying of equally aligned
buffers.
* sysdeps/powerpc/powerpc32/power5/fpu/s_isnanf.S: New file.
* sysdeps/powerpc/powerpc32/power6/fpu/s_isnan.S: New file.
* sysdeps/powerpc/powerpc32/power6/fpu/s_isnanf.S: New file.
* sysdeps/powerpc/powerpc64/power5/fpu/s_isnan.S: New file.
* sysdeps/powerpc/powerpc64/power6/fpu/s_isnan.S: New file.
* sysdeps/powerpc/powerpc64/power6x/fpu/s_isnan.S: New file.
* sysdeps/powerpc/powerpc32/power5/fpu/Implies: New file.
* sysdeps/powerpc/powerpc32/power5+/fpu/Implies: New file.
* sysdeps/powerpc/powerpc32/power6/fpu/Implies: New file.
* sysdeps/powerpc/powerpc32/power6x/fpu/Implies: New file.
* sysdeps/powerpc/powerpc64/970/fpu/Implies: New file.
* sysdeps/powerpc/powerpc64/power5/fpu/Implies: New file.
* sysdeps/powerpc/powerpc64/power5+/fpu/Implies: New file.
* sysdeps/powerpc/powerpc64/power6/fpu/Implies: New file.
* sysdeps/powerpc/powerpc64/power6x/fpu/Implies: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/970/fpu/Implies: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/power4/fpu/Implies:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/power5/fpu/Implies:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/power5+/fpu/Implies:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/power6/fpu/Implies:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/power6x/fpu/Implies:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/970/fpu/Implies: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/power4/fpu/Implies:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/power5/fpu/Implies:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/power5+/fpu/Implies:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/power6/fpu/Implies:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/power6x/fpu/Implies:
New file.
2007-05-31 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/powerpc64/fpu/s_llrint.S: Move.
* sysdeps/powerpc/powerpc32/power4/fpu/s_llrint.S: To here.
* sysdeps/powerpc/powerpc32/powerpc64/fpu/s_llrintf.S: Move.
* sysdeps/powerpc/powerpc32/power4/fpu/s_llrintf.S: To here.
* sysdeps/powerpc/powerpc32/powerpc64/fpu/s_llround.S: Move.
* sysdeps/powerpc/powerpc32/power4/fpu/s_llround.S: To here.
* sysdeps/powerpc/powerpc32/powerpc64/fpu/s_llroundf.S: Move.
* sysdeps/powerpc/powerpc32/power4/fpu/s_llroundf.S: To here.
2007-05-22 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/power5+/fpu/s_round.S
(LONG_DOUBLE_COMPAT): Specify correct version, GLIBC_2_1.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_trunc.S
(LONG_DOUBLE_COMPAT): Specify correct version, GLIBC_2_1.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_round.S
(LONG_DOUBLE_COMPAT): Specify correct version, GLIBC_2_1.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_trunc.S
(LONG_DOUBLE_COMPAT): Specify correct version, GLIBC_2_1.
2007-05-21 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/power4/fpu/slowexp.c: New file.
* sysdeps/powerpc/powerpc32/power4/fpu/w_sqrt.c: New file.
* sysdeps/powerpc/powerpc64/power4/fpu/slowexp.c: New file.
* sysdeps/powerpc/powerpc64/power4/fpu/w_sqrt.c: New file.
2007-03-15 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/powerpc64/fpu/s_llrint.S
[LONG_DOUBLE_COMPAT]: Add compat_symbol for llrintl@@GLIBC_2_1.
2006-02-13 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/power6/fpu/s_llrint.S: New File
* sysdeps/powerpc/powerpc32/power6/fpu/s_llrintf.S: New File
* sysdeps/powerpc/powerpc32/power6/fpu/s_llround.S: New File
* sysdeps/powerpc/powerpc32/power6/fpu/s_llroundf.S: New File
2006-10-20 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/power4/fpu/slowpow.c: New file.
* sysdeps/powerpc/powerpc64/power4/fpu/slowpow.c: New file.
2006-10-03 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/powerpc64/fpu/s_llround.S: New file.
* sysdeps/powerpc/powerpc32/powerpc64/fpu/s_llroundf.S: New file.
* sysdeps/powerpc/powerpc32/powerpc64/fpu/Makefile: Moved.
* sysdeps/powerpc/powerpc32/powerpc64/fpu/mpa.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/Makefile: To here.
* sysdeps/powerpc/powerpc32/power4/fpu/mpa.c: Likewise.
2006-09-29 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/power6x/fpu/s_lrint.S: New file.
* sysdeps/powerpc/powerpc32/power6x/fpu/s_lround.S: New file.
* sysdeps/powerpc/powerpc64/power6x/fpu/s_llrint.S: New file.
* sysdeps/powerpc/powerpc64/power6x/fpu/s_llround.S: New file.
2006-09-28 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/power5+/fpu/s_llround.S: New file.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_llroundf.S: New file.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_lround.S: New file.
* sysdeps/powerpc/powerpc32/power6x/fpu/Implies: New file.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_llround.S: New file.
* sysdeps/powerpc/powerpc64/power6x/fpu/Implies: New file.
2006-08-31 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/powerpc64/fpu/Makefile: New file.
* sysdeps/powerpc/powerpc32/powerpc64/fpu/mpa.c: New file.
* sysdeps/powerpc/powerpc64/power4/fpu/Makefile: New file.
* sysdeps/powerpc/powerpc64/power4/fpu/mpa.c: New file.
2006-06-15 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/power5+/fpu/s_ceil.S: New file.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_ceilf.S: New file.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_floor.S: New file.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_floorf.S: New file.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_round.S: New file.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_roundf.S: New file.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_trunc.S: New file.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_truncf.S: New file.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_ceil.S: New file.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_ceilf.S: New file.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_floor.S: New file.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_floorf.S: New file.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_round.S: New file.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_roundf.S: New file.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_trunc.S: New file.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_truncf.S: New file.
2006-03-20 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/powerpc64/fpu/s_llrint.S: New file.
* sysdeps/powerpc/powerpc32/powerpc64/fpu/s_llrintf.S: New file.
2007-06-01 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/power6/memset.S: New file.
* sysdeps/powerpc/powerpc64/power6/memset.S: New file.
2007-05-31 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/970/Implies: New file.
* sysdeps/powerpc/powerpc32/power5/Implies: New file.
* sysdeps/powerpc/powerpc32/power5+/Implies: New file.
* sysdeps/powerpc/powerpc32/power6/Implies: New file.
* sysdeps/powerpc/powerpc32/power6x/Implies: New file.
* sysdeps/powerpc/powerpc64/970/Implies: New file.
* sysdeps/powerpc/powerpc64/power5/Implies: New file.
* sysdeps/powerpc/powerpc64/power5+/Implies: New file.
* sysdeps/powerpc/powerpc64/power6/Implies: New file.
* sysdeps/powerpc/powerpc64/power6x/Implies: New file.
2007-05-21 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/power4/memset.S: New file
2007-03-13 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc64/memcpy.S: Improve aligned loop to minimize
branch miss-predicts. Ensure that cache line crossing does not impact
dispatch grouping.
2006-12-13 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc64/power4/memcopy.h: Replace with include
"../../powerpc32/power4/memcopy.h".
* sysdeps/powerpc/powerpc64/power4/wordcopy.c: Replace with include
"../../powerpc32/power4/wordcopy.c".
2006-10-03 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/powerpc64/Makefile: Moved.
* sysdeps/powerpc/powerpc32/powerpc64/memcopy.h: Likewise.
* sysdeps/powerpc/powerpc32/powerpc64/wordcopy.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/Makefile: To here.
* sysdeps/powerpc/powerpc32/power4/memcopy.h: Likewise.
* sysdeps/powerpc/powerpc32/power4/wordcopy.c: Likewise.
2006-09-10 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/power6/memcpy.S: New file.
2006-08-31 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/power6/wordcopy.c: New file.
* sysdeps/powerpc/powerpc32/powerpc64/Makefile: New file.
* sysdeps/powerpc/powerpc32/powerpc64/memcopy.h: New file.
* sysdeps/powerpc/powerpc32/powerpc64/wordcopy.c: New file.
* sysdeps/powerpc/powerpc64/power4/Makefile: New file.
* sysdeps/powerpc/powerpc64/power4/memcopy.h: New file.
* sysdeps/powerpc/powerpc64/power4/wordcopy.c: New file.
* sysdeps/powerpc/powerpc64/power6/wordcopy.c: New file.
2006-07-06 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc64/power6/memcpy.S: New file.
2006-03-20 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/power4/memcmp.S: New file.
* sysdeps/powerpc/powerpc32/power4/memcpy.S: New file.
* sysdeps/powerpc/powerpc32/power4/memset.S: New file.
* sysdeps/powerpc/powerpc32/power4/strncmp.S: New file.
* sysdeps/powerpc/powerpc64/power4/memcmp.S: New file.
* sysdeps/powerpc/powerpc64/power4/memcpy.S: New file.
* sysdeps/powerpc/powerpc64/power4/strncmp.S: New file.
2006-04-03 Steven Munroe <sjmunroe@us.ibm.com>
[BZ #2505]
* sysdeps/powerpc/powerpc32/bits/atomic.h [_ARCH_PWR4]:
Define atomic_read_barrier and __ARCH_REL_INSTR using lwsync.
of non-volatile floating-point registers to the stack (fp14-fp31).
* sysdeps/powerpc/powerpc32/gprsave0.S: Add cfi_offset for spilling of
non-volatile general-purpose registers to the stack (gpr13-gpr31).
* sysdeps/powerpc/powerpc64/dl-trampoline.S: Add cfi_offset
for non-volatiles gpr30 - grp31 spilled to the stack.
* sysdeps/powerpc/powerpc64/memcpy.S: Add cfi_offset for non-volatile
gpr31 spill to the stack.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/setcontext-common.S:
Add cfi_offset for non-volatile gpr31 spill to the stack.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S: Add cfi_offset
for non-volatiles gpr28 - grp31 spilled to the stack.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/getcontext.S: Add
cfi_adjust_cfa_offset when a frame is stacked.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/setcontext.S:
(__novec_setcontext) : Add cfi_offset for non-volatile gpr31 spill
add LR saved to the stack. Add cfi_adjust_cfa_offset when frame is
stacked.
(__setcontext) : Add cfi_offset for non-volatile gpr31 spill to
the stack.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/swapcontext.S:
(__novec_swapcontext) : Add cfi_offset for non-volatile gpr31 spill
add LR saved to the stack.
(__swapcontext) : Add cfi_offset for non-volatile gpr31 spill add LR
saved to the stack. Add cfi_adjust_cfa_offset when frame is stacked.
* elf/check-textrel.c: Include config.h.
(AB(handle_file)): Don't fail if PF_X | PF_W on architectures known
to have executable writable PLT.
* sysdeps/powerpc/powerpc32/configure.in (HAVE_PPC_SECURE_PLT): New
test.
* config.h.in (HAVE_PPC_SECURE_PLT): Add.
* malloc/malloc.c (MALLOC_ALIGNMENT): Set to __alignof__ (long double)
if long double is more aligned than 2 * SIZE_SZ.
(misaligned_chunk): Define.
(public_rEALLOc, _int_free, _int_realloc): Use it.
Jakub Jelinek <jakub@redhat.com>
Roland McGrath <roland@redhat.com>
Steven Munroe <sjmunroe@us.ibm.com>
Alan Modra <amodra@bigpond.net.au>
* sysdeps/powerpc/powerpc64/fpu/s_truncf.S: Comment fix.
* sysdeps/powerpc/powerpc32/fpu/s_truncf.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_llroundf.S: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Update.
* math/libm-test.inc (check_float_internal): Allow ulp <= 0.5.
(erfc_test): Don't run erfcl (27.0L) test if erfcl (27.0L) is
denormal.
[TEST_LDOUBLE] (ceil_test, floor_test, llrint_test, llround_test,
rint_test, round_test, trunc_test): Add new tests.
* sysdeps/powerpc/powerpc32/fpu/s_copysignl.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_fabs.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_fabsl.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_fdim.c: New file.
* sysdeps/powerpc/powerpc32/fpu/s_fmax.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_fmin.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_isnan.c: New file.
* sysdeps/powerpc/powerpc64/fpu/s_ceill.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_copysignl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_fabs.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_fabsl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_fdim.c: New file.
* sysdeps/powerpc/powerpc64/fpu/s_floorl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_fmax.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_fmin.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_isnan.c: New file.
* sysdeps/powerpc/powerpc64/fpu/s_llrintl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_llroundl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_lrintl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_lroundl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_nearbyintl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_rintl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_roundl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_truncl.S: New file.
* sysdeps/unix/sysv/linux/powerpc/Implies: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/fpu/Implies: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/Implies: New file.
* sysdeps/unix/sysv/linux/powerpc/configure.in: New file.
* sysdeps/unix/sysv/linux/powerpc/configure: New file.
* sysdeps/unix/sysv/linux/powerpc/bits/wordsize.h
(__LONG_DOUBLE_MATH_OPTIONAL): Define.
(__NO_LONG_DOUBLE_MATH): Define.
* sysdeps/unix/sysv/linux/powerpc/nldbl-abi.h: New file.
* sysdeps/powerpc/fpu/s_isnan.c: Include math_ldbl_opt.h.
* sysdeps/powerpc/powerpc64/fpu/s_ceil.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (ceill): Add compatibility symbols.
* sysdeps/powerpc/powerpc64/fpu/s_copysign.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (copysignl): Add compatibility symbols.
* sysdeps/powerpc/powerpc64/fpu/s_floor.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (floorl): Add compatibility symbols.
* sysdeps/powerpc/powerpc64/fpu/s_llrint.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (llrintl, lrintl): Add compatibility symbols.
* sysdeps/powerpc/powerpc64/fpu/s_llround.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (llroundl, lroundl): Add compatibility symbols.
* sysdeps/powerpc/powerpc64/fpu/s_rint.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (rintl): Add compatibility symbols.
* sysdeps/powerpc/powerpc64/fpu/s_round.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (roundl): Add compatibility symbols.
* sysdeps/powerpc/powerpc64/fpu/s_trunc.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (truncl): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_ceil.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (ceill): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_copysign.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (copysignl): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_floor.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (floorl): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_lrint.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (lrintl): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_llrint.c: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (llrintl): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_lround.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (lroundl): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_rint.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (rintl): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_round.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (roundl): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_trunc.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (truncl): Add compatibility symbols.
* misc/qefgcvt_r.c [LDBL_MIN_10_EXP == -291] (FLOAT_MIN_10_NORM): New.
* sysdeps/powerpc/fpu/bits/mathdef.h (__NO_LONG_DOUBLE_MATH): Remove.
* sysdeps/powerpc/Implies: Add ieee754/ldbl-128ibm.
* sysdeps/powerpc/powerpc32/Implies: Remove powerpc/soft-fp.
* sysdeps/ieee754/ldbl-128ibm/Makefile: New file.
* sysdeps/ieee754/ldbl-128ibm/e_acoshl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_acosl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_asinl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_atan2l.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_atanhl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_coshl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_expl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_fmodl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_gammal_r.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_hypotl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_j0l.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_j1l.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_jnl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_lgammal_r.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_log10l.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_log2l.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_logl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_powl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_rem_pio2l.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_remainderl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_sinhl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_sqrtl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/ieee754.h: New file.
* sysdeps/ieee754/ldbl-128ibm/k_cosl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/k_sincosl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/k_sinl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/k_tanl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/ldbl2mpn.c: New file.
* sysdeps/ieee754/ldbl-128ibm/math_ldbl.h: New file.
* sysdeps/ieee754/ldbl-128ibm/mpn2ldbl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/printf_fphex.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_asinhl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_atanl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_cbrtl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_cosl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_erfl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_expm1l.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_fabsl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_finitel.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_fpclassifyl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_frexpl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_ilogbl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_isinfl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_isnanl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_log1pl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_logbl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_modfl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_nextafterl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_nexttoward.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_nexttowardf.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_remquol.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_rintl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_scalblnl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_scalbnl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_signbitl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_sincosl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_sinl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_tanhl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_tanl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_truncl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/strtold_l.c: New file.
* sysdeps/ieee754/ldbl-128ibm/t_sincosl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/w_expl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_copysignl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_floorl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_llrintl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_llroundl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_roundl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_ceill.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_nearbyintl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_lrintl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_lroundl.c: New file.
* sysdeps/ieee754/ldbl-128/e_powl.c: Fix old comment.
directive to ENTRY macros.
(END): Add cfi_endproc directive to END macro.
* sysdeps/powerpc/powerpc64/sysdep.h (ENTRY, EALIGN): Add cfi_startproc
directive to ENTRY macros.
(END, END_GEN_TB): Add cfi_endproc directive to END macros.
* sysdeps/powerpc/powerpc32/dl-start.S: Remove ENTRY()s for
_dl_start_user and _dl_main_dispatch.
* sysdeps/powerpc/powerpc32/fpu/fprrest.S: Use END macro.
* sysdeps/powerpc/powerpc32/fpu/fprsave.S: Use Likewise.
* sysdeps/powerpc/powerpc32/gprrest0.S: Likewise.
* sysdeps/powerpc/powerpc32/gprrest1.S: Likewise.
* sysdeps/powerpc/powerpc32/gprsave0.S: Likewise.
* sysdeps/powerpc/powerpc32/gprsave1.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/socket.S: Remove redundant
cfi_startproc and cfi_endproc.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/socket.S: Likewise.
2006-01-04 Ulrich Drepper <drepper@redhat.com>
* sysdeps/pthread/aio_misc.h (struct waitlist): Add result member.
* sysdeps/pthread/aio_notify.c (__aio_notify): For synchronous waiters,
failed I/O, and a result pointer, set value to -1.
* sysdeps/pthread/aio_suspend.c: Initialize result pointer to NULL.
* sysdeps/pthread/lio_listio.c: For LIO_WAIT, point result pointer in
wait list to local variable result. If nonzero afterwards, set errno
to EIO. For LIO_NOWAIT set result to NULL.
* rt/Makefile (tests): Add tst-aio8.
* rt/tst-aio8.c: New file.
value doesn't survive in a registers when the function returns.
* sysdeps/powerpc/powerpc32/fpu/setjmp-common.S: Likewise.
* sysdeps/powerpc/powerpc32/setjmp-common.S: Likewise.
2005-12-30 Jakub Jelinek <jakub@redhat.com>
* sysdeps/unix/sysv/linux/powerpc/powerpc32/sysdep.h: Define
PTR_MANGLE2.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/sysdep.h: Define
PTR_MANGLE2 and PTR_DEMANGLE2.
* sysdeps/powerpc/powerpc64/__longjmp-common.S: Use PTR_DEMANGLE2.
* sysdeps/powerpc/powerpc64/setjmp-common.S: Use PTR_MANGLE2.
* sysdeps/powerpc/powerpc32/fpu/setjmp-common.S: Likewise.
* sysdeps/powerpc/powerpc32/setjmp-common.S: Likewise.
2005-12-30 Ulrich Drepper <drepper@redhat.com>
Tom Gall <tom_gall@vnet.ibm.com>
* elf/rtld.c (dl_main): Initialize l_local_scope for sysinfo_map.
* sysdeps/powerpc/elf/libc-start.c: Move this...
* sysdeps/unix/sysv/linux/powerpc/libc-start.c: ...to here.
* sysdeps/powerpc/powerpc32/dl-start.S: Add _dl_main_dispatch label.
* sysdeps/powerpc/powerpc32/hp-timing.h: New file.
* sysdeps/unix/sysv/linux/powerpc/Versions: New file.
* sysdeps/unix/sysv/linux/clock_getres.c: If HAVE_CLOCK_GETRES_VSYSCALL
is not defined, redefine INTERNAL_VSYSCALL and INLINE_VSYSCALL to
INTERNAL_SYSCALL and INLINE_SYSCALL respectively. Otherwise include
<bits/libc-vdso.h>. Use INLINE_VSYSCALL and INTERNAL_SYSCALL instead
of the normal versions throughout the code.
* sysdeps/unix/sysv/linux/clock_gettime.c: Likewise if
HAVE_CLOCK_GETTIME_VSYSCALL is defined.
* sysdeps/unix/sysv/linux/powerpc/bits/libc-vdso.h: New file.
* sysdeps/unix/sysv/linux/powerpc/dl-vdso.c: New file.
* sysdeps/unix/sysv/linux/powerpc/dl-vdso.h: New file.
* sysdeps/unix/sysv/linux/powerpc/get_clockfreq.c: Use vDSO.
* sysdeps/unix/sysv/linux/powerpc/gettimeofday.c: New file.
* sysdeps/unix/sysv/linux/powerpc/Makefile: Add dl-vdso to routines.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/sysdep.h: Define
INLINE_VSYSCALL, INTERNAL_VSYSCALL, INTERNAL_SYSCALL_NCS,
INTERNAL_VSYSCALL_NO_SYSCALL_FALLBACK, HAVE_CLOCK_GETRES_VSYSCALL,
and HAVE_CLOCK_GETTIME_VSYSCALL.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/sysdep.h: Likewise.
* intl/dcigettext.c (_nl_find_msg): Add a cast.
* nis/nis_clone_dir.c (nis_clone_directory): Use char * for ADDR.
* nis/nis_clone_obj.c (nis_clone_object): Likewise.
* nis/nis_clone_res.c (nis_clone_result): Likewise.
* resolv/nss_dns/dns-network.c (getanswer_r): Use const unsigned char *
for END_OF_MESSAGE and CP.
* resolv/res_send.c (send_dg): Add else branch for case impossible
unless `poll' is buggy.
* crypt/crypt_util.c (__setkey_r): Add a cast.
* locale/programs/linereader.c (get_toplvl_escape): Use size_t for
NBYTES, and unsigned char * for BYTES.
* locale/programs/charmap.c (charmap_new_char): Use size_t and
unsighed char * for NBYTES, BYTES parameters.
* sysdeps/generic/dl-hash.h (_dl_elf_hash): Take const char * argument
and cast it.
* sysdeps/i386/i686/dl-hash.h (_dl_elf_hash): Likewise.
* sunrpc/create_xid.c (_create_xid): Don't use unsigned long for RES.
* sunrpc/svcauth_des.c (_svcauth_des): Fix cast type.
* sunrpc/auth_des.c (authdes_create): Don't use u_char for PKEY_DATA.
(authdes_marshal): Don't use unsigned int for LEN.
* sunrpc/xdr.c (xdr_hyper): Don't use unsigned long for T2.
(xdr_u_hyper): Likewise.
(xdr_u_short): Don't use u_long for L.
* sunrpc/xdr_intXX_t.c (xdr_int64_t): Don't use uint32_t for T2.
* inet/rexec.c (rexec_af): Use socklen_t.
* sunrpc/key_call.c (getkeyserv_handle): Likewise.
* sunrpc/rtime.c (rtime): Likewise.
* resolv/res_send.c (send_vc, send_dg): Likewise.
* nis/nis_callback.c (__nis_create_callback): Likewise.
* sysdeps/generic/libc-start.c: Use unsigned int for nthreads ptr.
* sysdeps/posix/getaddrinfo.c (gaih_inet): Fix type of ADDR local.
* libio/libio.h (_IO_BE): Add parenthesis around EXPR.
* intl/dcigettext.c (INTVARDEF, INTUSE): Macros removed.
(_nl_default_dirname): Use libc_hidden_data_def instead of INTVARDEF.
(libc_freeres_fn, DCIGETTEXT): Don't use INTUSE.
* intl/bindtextdom.c (INTUSE): Macro removed.
(_nl_default_dirname): Use libc_hidden_proto.
(set_binding_values): Don't use INTUSE.
* include/libintl.h (_libc_intl_domainname_internal): Decl removed.
(_libc_intl_domainname): Use libc_hidden_proto.
* posix/regex_internal.h (gettext): Remove INTUSE on it.
* locale/SYS_libc.c (_libc_intl_domainname): Use libc_hidden_data_def
rather than INTDEF.
* include/libintl.h (_): Don't use *_internal name.
* ctype/ctype-extn.c (__ctype_tolower, __ctype_toupper): Use int32_t,
not uint32_t.
* locale/lc-ctype.c (_nl_postload_ctype): Likewise for assignments.
* iconv/gconv_open.c (__gconv_open): Remove useless cast.
[BZ #721]
* sysdeps/i386/dl-machine.h (ELF_MACHINE_NO_RELA): Define this outside
of [RESOLVE_MAP].
* sysdeps/sh/dl-machine.h (ELF_MACHINE_NO_REL): Likewise.
* sysdeps/powerpc/powerpc32/dl-machine.h
(elf_machine_rel, elf_machine_rel_relative): Removed.
* sysdeps/powerpc/powerpc64/dl-machine.h
(elf_machine_rel, elf_machine_rel_relative): Removed.
2005-02-03 Alexandre Oliva <aoliva@redhat.com>
[BZ #721]
* elf/dynamic-link.h: Don't declare nested auto functions that are
not going to be defined.
2004-07-23 Jakub Jelinek <jakub@redhat.com>
[BZ #284]
* include/features.h (_POSIX_SOURCE, _POSIX_C_SOURCE): Define
if _XOPEN_SOURCE >= 500 even if __STRICT_ANSI__ is defined.
2005-02-16 Roland McGrath <roland@redhat.com>
* sysdeps/powerpc/powerpc32/dl-machine.c (__elf_machine_runtime_setup):
If profile != 0 does not anymore mean GLRO(dl_profile) != NULL.
* sysdeps/powerpc/powerpc32/bits/link.h: Fix types of some fields in
the register and result structures.
* sysdeps/powerpc/powerpc64/bits/link.h: Fix types of some fields
in the 32-bit register and result structures.
* sysdeps/powerpc/powerpc32/dl-trampoline.S (_dl_prof_resolve):
Extend _dl_prof_resolve to add pass extra parameters to
_dl_profile_fixup and set up structure with register content.
* sysdeps/powerpc/powerpc32/fpu/__longjmp-common.S: Make no_vmx symbol
local.
* sysdeps/powerpc/powerpc32/fpu/setjmp-common.S: Make no_vmx symbol
local.
* sysdeps/powerpc/powerpc64/__longjmp-common.S: Make no_vmx symbol
local.
* sysdeps/powerpc/powerpc64/setjmp-common.S: Make no_vmx and
aligned_save_vmx symbol local.
2004-07-05 Ulrich Drepper <drepper@redhat.com>
* elf/dl-init.c: Don't define and use _dl_starting_up if
HAVE_INLINED_SYSCALLS is defined and the variable is not used.
* elf/dl-support.c: Likewise.
* elf/rtld.c: Likewise.
* elf/dl-misc.c (_dl_debug_vdprintf): Use writev syscall directly
if HAVE_INLINED_SYSCALLS is defined.
* sysdeps/powerpc/powerpc64/dl-machine.h: Don't rest _dl_starting_up
here.
* sysdeps/powerpc/powerpc32/dl-start.S: Likewise.
* sysdeps/unix/sysv/linux/configure.in: Define HAVE_INLINED_SYSCALLS.
* config.h.in: Add entry for HAVE_INLINED_SYSCALLS.
* sysdeps/posix/profil.c: If compiled for ld.so, omit code which
is needed to stop profiling.
* elf/dl-open.c (dl_open_worker): If a newly opened object is to be
profile make sure it cannot be unloaded.
* sysdeps/unix/sysv/linux/dl-origin.c: Inline readlink syscall.
* sysdeps/unix/sysv/linux/fcntl.c: If compiled without cancellation
support, make sure the helper function is inlined.
* sysdeps/unix/sysv/linux/pread.c: Likewise.
* sysdeps/unix/sysv/linux/pwrite.c: Likewise.
* sysdeps/unix/sysv/linux/i386/fcntl.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/fcntl.c: Likewise.
2004-07-05 Jakub Jelinek <jakub@redhat.com>
* sysdeps/powerpc/novmx-longjmp.c (__libc_longjmp,
__libc_siglongjmp): Remove symbol_version.
* sysdeps/powerpc/longjmp.c (__libc_longjmp, __libc_siglongjmp):
Export @@GLIBC_PRIVATE, not @@GLIBC_2.3.4.
* sysdeps/powerpc/sigjmp.c (__sigjmp_save): Use strong_alias
unconditionally.
* sysdeps/powerpc/novmx-sigjmp.c (__sigjmp_save): Remove.
* sysdeps/powerpc/powerpc32/__longjmp.S (__longjmp): Use
strong_alias instead of default_symbol_version, remove
symbol_version.
* sysdeps/powerpc/powerpc64/__longjmp.S (__longjmp): Likewise.
* sysdeps/powerpc/powerpc32/bsd-setjmp.S (__novmx__setjmp): Change
into strong_alias to __novmxsetjmp.
(__vmx__setjmp): Similarly with __vmxsetjmp.
(__setjmp): Make it strong_alias to __vmx__setjmp, remove
default_symbol_version and symbol_version.
* sysdeps/powerpc/powerpc64/bsd-setjmp.S (__novmx__setjmp): Change
into strong_alias to __novmxsetjmp.
(__vmx__setjmp): Similarly with __vmxsetjmp.
(__setjmp): Make it strong_alias to __vmx__setjmp, remove
default_symbol_version and symbol_version.
* nscd/nscd_getgr_r.c: Include stdio-common/_itoa.h.
2004-06-11 Dwayne Grant McConnell <dgm69@us.ibm.com>
* sysdeps/powerpc/fpu/s_lround.c: Removed.
* sysdeps/powerpc/fpu/s_lroundf.c: Removed.
* sysdeps/powerpc/powerpc32/fpu/s_ceilf.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_ceil.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_floorf.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_floor.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_lrint.c: Removed.
* sysdeps/powerpc/powerpc32/fpu/s_lrint.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_lroundf.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_lround.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_rintf.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_rint.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_roundf.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_round.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_truncf.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_trunc.S: New file.
2004-05-25 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/fpu/Makefile: Make ld.so a dependency of libm.so.
* sysdeps/powerpc/fpu/bits/mathinline.h [__LIBC_INERNAL_MATH_INLINES]
(__ieee754_sqrt): Define as __MATH_INLINE using fsqrt instruction.
(__ieee754_sqrtf): Define as __MATH_INLINE using fsqrts instruction.
* sysdeps/powerpc/fpu/e_sqrt.c (__slow_ieee754_sqrt): Moved
implementation from w_sqrt.c.
* sysdeps/powerpc/fpu/e_sqrtf.c (__slow_ieee754_sqrtf): Moved
implementation from w_sqrtf.c.
* sysdeps/powerpc/fpu/w_sqrt.c (__sqrt): Wrapper implementation
using inline __ieee754_sqrt().
* sysdeps/powerpc/fpu/w_sqrtf.c (__sqrtf): Wrapper implementation
using inline __ieee754_sqrtf().
* sysdeps/powerpc/powerpc32/sysdep.h [__ASSEMBLER__]: Include
<sysdeps/powerpc/sysdep.h> independent of __ASSEMBLER__.
* sysdeps/powerpc/sysdep.h [__ASSEMBLER__] (PPC_FEATURE_*): Define
PPC_FEATURE_* independent of __ASSEMBLER__.
2004-05-25 Jakub Jelinek <jakub@redhat.com>
* sysdeps/pthread/aio_notify.c: Use <> instead of "" for aio_misc.h
include.
(aio_start_notify_thread): Define if not defined.
(notify_func_wrapper): Use it.
* sysdeps/pthread/aio_misc.c: Use <> instead of "" for aio_misc.h
include.
(aio_create_helper_thread): Define if not defined.
(__aio_create_helper_thread): New function.
(__aio_enqueue_request): Use aio_create_helper_thread.
* nis/ypclnt.c (ypall_data, ypall_foreach): Remove.
(struct ypresp_all_data): New type.
(__xdr_ypresp_all): Change second argument to
struct ypresp_all_data *. Replace ypall_foreach and
ypall_data with objp->foreach and objp->data.
(yp_all): Remove status variable, add data. Replace
all uses of status with data.status. Initialize data.foreach
and data.data instead of ypall_foreach and ypall_data.
2004-05-24 Jakub Jelinek <jakub@redhat.com>
* elf/dl-lookup.c (add_dependency): Set DF_1_NODELETE bit
in l_flags_1, not in l_flags.
* sysdeps/powerpc/powerpc32/__longjmp.S (JB_SIZE): Undefine before
including __longjmp-common.S again.
* sysdeps/powerpc/powerpc64/__longjmp.S (JB_SIZE): Likewise.
* sysdeps/powerpc/powerpc32/setjmp.S (JB_SIZE): Undefine before
including setjmp-common.S again.
* sysdeps/powerpc/powerpc64/setjmp.S (JB_SIZE): Likewise.
* sysdeps/powerpc/novmxsetjmp.h (__novmx__longjmp): Fix type of
first argument in the prototype.
* sysdeps/powerpc/longjmp.c (__vmx__longjmp, __vmx__libc_longjmp):
Remove bogus semicolons.
2004-02-13 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc64/__longjmp-common.S: New file.
* sysdeps/powerpc/powerpc64/__longjmp.S [NOT_IN_libc](__longjmp):
Non-versioned __longjmp for rtld-__longjmp.
[!NOT_IN_libc](__vmx__longjmp): Add VMX reg support and define as
default version of __longjmp.
[SHARED && SHLIB_COMPAT (libc, GLIBC_2_3, GLIBC_2_3_4)]
(__novmx__longjmp): Original version of __longjmp.
* sysdeps/powerpc/powerpc64/bsd-_setjmp.S [NOT_IN_libc](_setjmp):
Non-versioned _setjmp for rtld-_setjmp.
[!NOT_IN_libc](__vmx_setjmp): Branch to __vmx__sigsetjmp and define
as default version of _setjmp.
[SHARED && SHLIB_COMPAT (libc, GLIBC_2_3, GLIBC_2_3_4)]
(__novmx_setjmp): Original version of _setjmp.
* sysdeps/powerpc/powerpc64/bsd-setjmp.S (__vmxsetjmp): Branch to
__vmx__sigsetjmp and define as default version of setjmp.
[SHARED && SHLIB_COMPAT (libc, GLIBC_2_3, GLIBC_2_3_4)]
(__novmxsetjmp): Original version of setjmp.
* sysdeps/powerpc/powerpc64/setjmp-common.S: New file.
* sysdeps/powerpc/powerpc64/setjmp.S [NOT_IN_libc](__setjmp):
Non-versioned __sigsetjmp for rtld-setjmp.
[!NOT_IN_libc](__vmx__sigsetjmp): Add VMX reg support and define
as default version of __sigsetjmp.
[SHARED && SHLIB_COMPAT (libc, GLIBC_2_3, GLIBC_2_3_4)]
(__novmx__sigsetjmp): Original version of __sigsetjmp.
* sysdeps/powerpc/powerpc32/__longjmp-common.S: New File
* sysdeps/powerpc/powerpc32/__longjmp.S [NOT_IN_libc](__longjmp):
Non-versioned __longjmp for rtld-__longjmp.
[!NOT_IN_libc](__vmx__longjmp): Add VMX reg support and define as
default version of __longjmp.
[SHARED && SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_3_4)]
(__novmx__longjmp): Original version of __longjmp.
* sysdeps/powerpc/powerpc32/bsd-_setjmp.S [NOT_IN_libc](_setjmp):
Non-versioned _setjmp for rtld-_setjmp.
[!NOT_IN_libc](__vmx_setjmp): Branch to __vmx__sigsetjmp and define
as default version of _setjmp.
[SHARED && SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_3_4)]
(__novmx_setjmp): Original version of _setjmp.
* sysdeps/powerpc/powerpc32/bsd-setjmp.S (__vmxsetjmp): Branch to
__vmx__sigsetjmp and define as default version of setjmp.
[SHARED && SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_3_4)]
(__novmxsetjmp): Original version of setjmp.
* sysdeps/powerpc/powerpc32/fpu/__longjmp-common.S: New file.
* sysdeps/powerpc/powerpc32/fpu/__longjmp.S [NOT_IN_libc](__longjmp):
Non-versioned __longjmp for rtld-__longjmp.
[!NOT_IN_libc](__vmx__longjmp): Add VMX reg support and define as
default version of __longjmp.
[SHARED && SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_3_4)]
(__novmx__longjmp): Original version of __longjmp.
* sysdeps/powerpc/powerpc32/fpu/setjmp-common.S: New file.
* sysdeps/powerpc/powerpc32/fpu/setjmp.S [NOT_IN_libc](__setjmp):
Non-versioned __sigsetjmp for rtld-setjmp.
[!NOT_IN_libc](__vmx__sigsetjmp): Add VMX reg support and define
as default version of __sigsetjmp.
[SHARED && SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_3_4)]
(__novmx__sigsetjmp): Original version of __sigsetjmp.
* sysdeps/powerpc/powerpc32/setjmp-common.S: New file.
* sysdeps/powerpc/powerpc32/setjmp.S [NOT_IN_libc](__setjmp):
Non-versioned __sigsetjmp for rtld-setjmp.
[!NOT_IN_libc](__vmx__sigsetjmp): Add VMX reg support and define
as default version of __sigsetjmp.
[SHARED && SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_3_4)]
(__novmx__sigsetjmp): Original version of __sigsetjmp.
* sysdeps/powerpc/Dist: New File.
* sysdeps/powerpc/Makefile (sysdep_routines): Add novmx-longjmp.c
and novmx-sigjmp.c
* sysdeps/powerpc/Versions (libc): To GLIBC_2.3_4 add _longjmp,
__sigsetjmp, _setjmp, longjmp, and setjmp. To GLIBC_PRIVATE add
__novmx__libc_longjmp, __novmx__libc_siglongjmp, __vmx__libc_longjmp,
and __vmx__libc_siglongjmp.
* sysdeps/powerpc/bits/setjmp.h: Define JB_VRSAVE, JB_VRS, and adjust
JB_SIZE to add VMX regs to __jmp_buf.
* sysdeps/powerpc/longjmp.c: New file.
* sysdeps/powerpc/novmxsetjmp.h: New file.
* sysdeps/powerpc/novmx-longjmp.c: New file.
* sysdeps/powerpc/novmx-sigjmp.c: New file.
* sysdeps/powerpc/sigjmp.c: New file.
2004-02-06 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/dl-machine.c: Declare __cache_line_size as
weak extern.
(__elf_machine_runtime_setup): Invalidate the instruction cache over
the whole range of the PLT.
2003-04-16 Jakub Jelinek <jakub@redhat.com>
* elf/Makefile (distribute): Add tst-tlsmod{[7-9],1[0-2]}.c and
tst-tls10.h.
(tests): Add tst-tls1[0-2].
(modules-names): Add tst-tlsmod{[7-8],1[0-2]}.
($(objpfx)tst-tlsmod8.so): Depend on tst-tlsmod7.so.
($(objpfx)tst-tlsmod10.so): Depend on tst-tlsmod9.so.
($(objpfx)tst-tlsmod12.so): Depend on tst-tlsmod11.so.
($(objpfx)tst-tls10): Depend on tst-tlsmod8.so.
($(objpfx)tst-tls11): Depend on tst-tlsmod10.so.
($(objpfx)tst-tls12): Depend on tst-tlsmod12.so.
* elf/tst-tls10.c: New test.
* elf/tst-tls11.c: New test.
* elf/tst-tls12.c: New test.
* elf/tst-tls10.h: New file.
* elf/tst-tlsmod7.c: New file.
* elf/tst-tlsmod8.c: New file.
* elf/tst-tlsmod9.c: New file.
* elf/tst-tlsmod10.c: New file.
* elf/tst-tlsmod11.c: New file.
* elf/tst-tlsmod12.c: New file.
2003-04-15 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/bits/atomic.h: Moved ppc32/64 specific code to ...
* sysdeps/powerpc/powerpc32/bits/atomic.h: New file.
* sysdeps/powerpc/powerpc64/bits/atomic.h: New file.
* posix/regex.h: Include <sys/types.h>.
2003-04-15 Jakub Jelinek <jakub@redhat.com>
* sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_rela): Avoid
checking R_PPC_RELATIVE, R_PPC_NONE and whether relocation is
against local symbol in conflict processing.
(LIBC_START_MAIN, LIBC_START_MAIN_AUXVEC_ARG, MAIN_AUXVEC_ARG)
(INIT_MAIN_ARGS): Define, and #include <sysdeps/generic/libc-start.c>.
(__libc_start_main): Just call the generic one for most of the work.
* sysdeps/generic/libc-start.c [LIBC_START_MAIN]: If defined, define a
static function by that name instead of BP_SYM (__libc_start_main).
[LIBC_START_MAIN_AUXVEC_ARG]: Take AUXVEC as argument.
[MAIN_AUXVEC_ARG]: Pass 4th argument to MAIN.
[INIT_MAIN_ARGS]: Give INIT the same args as MAIN.
* sysdeps/generic/dl-sysdep.c (_dl_sysdep_start) [DL_PLATFORM_AUXV]:
Use this macro for extra AT_* cases.
* sysdeps/unix/sysv/linux/powerpc/dl-sysdep.c (DL_PLATFORM_AUXV):
New macro, guts from ...
(__aux_init_cache): ... here, function removed.
(DL_PLATFORM_INIT): Don't define this.
* sysdeps/powerpc/powerpc32/memset.S: Put __cache_line_size in bss.
* sysdeps/powerpc/powerpc64/memset.S: Likewise.
* Versions.def (libthread_db): Add GLICB_2.3.3 set.
Don't use weak_extern for dl_rtld_map. Instead check only if [SHARED].
(elf_machine_rela): Clean up.
* sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_rela): Clean up.
PowerPC TLS support contributed by Paul Mackerras <paulus@samba.org>.
* sysdeps/powerpc/powerpc32/elf/configure.in: New file.
* sysdeps/powerpc/powerpc32/elf/configure: New generated file.
* elf/tls-macros.h [__powerpc__ && !__powerpc64__]
(TLS_LE, TLS_IE, TLS_LD, TLS_GD): Define them.
* sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_rela): Support
new relocs for TLS.
* sysdeps/powerpc/dl-tls.h (TLS_TP_OFFSET, TLS_DTV_OFFSET): Move these
macros out of [SHARED].
(TLS_TPREL_VALUE, TLS_DTPREL_VALUE): New macros.
* elf/elf.h: Define R_PPC_* relocs for TLS support.
Clean up R_PPC64_* macro definition comments.
* sysdeps/powerpc/powerpc32/sysdep.h: New file. Define powerpc32
specific macros copied from sysdeps/powerpc/sysdep.h.
* sysdeps/powerpc/powerpc64/sysdep.h: New file. Define powerpc64
specific macros.
* sysdeps/unix/powerpc/sysdep.h: Include <bits/wordsize.h>.
[__WORDSIZE==64]: Include sysdeps/powerpc/powerpc64/sysdep.h.
[!__WORDSIZE==64]: Include sysdeps/powerpc/powerpc32/sysdep.h.
2002-07-29 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/__longjmp.S: Moved to...
* sysdeps/powerpc/powerpc32/__longjmp.S: ...here.
* sysdeps/powerpc/add_n.S: Moved to...
* sysdeps/powerpc/powerpc32/add_n.S: ...here.
* sysdeps/powerpc/addmul_1.S: Moved to...
* sysdeps/powerpc/powerpc32/addmul_1.S: ...here.
* sysdeps/powerpc/atomicity.h: Moved to...
* sysdeps/powerpc/powerpc32/atomicity.h: ...here.
* sysdeps/powerpc/backtrace.c: Moved to...
* sysdeps/powerpc/powerpc32/backtrace.c: ...here.
* sysdeps/powerpc/bp-asm.h: Moved to...
* sysdeps/powerpc/powerpc32/bp-asm.h: ...here.
* sysdeps/powerpc/bsd-_setjmp.S: Moved to...
* sysdeps/powerpc/powerpc32/bsd-_setjmp.S: ...here.
* sysdeps/powerpc/bsd-setjmp.S: Moved to...
* sysdeps/powerpc/powerpc32/bsd-setjmp.S: ...here.
* sysdeps/powerpc/dl-machine.c: Moved to...
* sysdeps/powerpc/powerpc32/dl-machine.c: ...here.
* sysdeps/powerpc/dl-machine.h: Moved to...
* sysdeps/powerpc/powerpc32/dl-machine.h: ...here.
* sysdeps/powerpc/dl-start.S: Moved to...
* sysdeps/powerpc/powerpc32/dl-start.S: ...here.
* sysdeps/powerpc/gprrest0.S: Moved to...
* sysdeps/powerpc/powerpc32/gprrest0.S: ...here.
* sysdeps/powerpc/gprrest1.S: Moved to...
* sysdeps/powerpc/powerpc32/gprrest1.S: ...here.
* sysdeps/powerpc/gprsave0.S: Moved to...
* sysdeps/powerpc/powerpc32/gprsave0.S: ...here.
* sysdeps/powerpc/gprsave1.S: Moved to...
* sysdeps/powerpc/powerpc32/gprsave1.S: ...here.
* sysdeps/powerpc/lshift.S: Moved to...
* sysdeps/powerpc/powerpc32/lshift.S: ...here.
* sysdeps/powerpc/memset.S: Moved to...
* sysdeps/powerpc/powerpc32/memset.S: ...here.
* sysdeps/powerpc/mul_1.S: Moved to...
* sysdeps/powerpc/powerpc32/mul_1.S: ...here.
* sysdeps/powerpc/ppc-mcount.S: Moved to...
* sysdeps/powerpc/powerpc32/ppc-mcount.S: ...here.
* sysdeps/powerpc/register-dump.h: Moved to...
* sysdeps/powerpc/powerpc32/register-dump.h: ...here.
* sysdeps/powerpc/rshift.S: Moved to...
* sysdeps/powerpc/powerpc32/rshift.S: ...here.
* sysdeps/powerpc/setjmp.S: Moved to...
* sysdeps/powerpc/powerpc32/setjmp.S: ...here.
* sysdeps/powerpc/stpcpy.S: Moved to...
* sysdeps/powerpc/powerpc32/stpcpy.S: ...here.
* sysdeps/powerpc/strchr.S: Moved to...
* sysdeps/powerpc/powerpc32/strchr.S: ...here.
* sysdeps/powerpc/strcmp.S: Moved to...
* sysdeps/powerpc/powerpc32/strcmp.S: ...here.
* sysdeps/powerpc/strcpy.S: Moved to...
* sysdeps/powerpc/powerpc32/strcpy.S: ...here.
* sysdeps/powerpc/strlen.S: Moved to...
* sysdeps/powerpc/powerpc32/strlen.S: ...here.
* sysdeps/powerpc/sub_n.S: Moved to...
* sysdeps/powerpc/powerpc32/sub_n.S: ...here.
* sysdeps/powerpc/submul_1.S: Moved to...
* sysdeps/powerpc/powerpc32/submul_1.S: ...here.
* sysdeps/powerpc/elf/bzero.S: Moved to...
* sysdeps/powerpc/powerpc32/elf/bzero.S: ...here.
* sysdeps/powerpc/elf/start.S: Moved to...
* sysdeps/powerpc/powerpc32/elf/start.S: ...here.
* sysdeps/powerpc/fpu/__longjmp.S: Moved to...
* sysdeps/powerpc/powerpc32/fpu/__longjmp.S: ...here.
* sysdeps/powerpc/fpu/fprrest.S: Moved to...
* sysdeps/powerpc/powerpc32/fpu/fprrest.S: ...here.
* sysdeps/powerpc/fpu/fprsave.S: Moved to...
* sysdeps/powerpc/powerpc32/fpu/fprsave.S: ...here.
* sysdeps/powerpc/fpu/setjmp.S: Moved to...
* sysdeps/powerpc/powerpc32/fpu/setjmp.S: ...here.
* sysdeps/powerpc/fpu/s_copysign.S: Moved to...
* sysdeps/powerpc/powerpc32/fpu/s_copysign.S: ...here.
* sysdeps/powerpc/fpu/s_copysignf.S: Moved to...
* sysdeps/powerpc/powerpc32/fpu/s_copysignf.S: ...here.
* sysdeps/unix/sysv/linux/powerpc/brk.S: Moved to...
* sysdeps/unix/sysv/linux/powerpc/powerpc32/brk.S: ...here.
* sysdeps/unix/sysv/linux/powerpc/clone.S: Moved to...
* sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S: ...here.
* sysdeps/unix/sysv/linux/powerpc/glob64.c: Moved to...
* sysdeps/unix/sysv/linux/powerpc/powerpc32/glob64.c: ...here.
* sysdeps/unix/sysv/linux/powerpc/kernel_stat.h: Moved to...
* sysdeps/unix/sysv/linux/powerpc/powerpc32/kernel_stat.h: ...here.
* sysdeps/unix/sysv/linux/powerpc/socket.S: Moved to...
* sysdeps/unix/sysv/linux/powerpc/powerpc32/socket.S: ...here.
* sysdeps/unix/sysv/linux/powerpc/sysdep.h: Moved to...
* sysdeps/unix/sysv/linux/powerpc/powerpc32/sysdep.h: ...here.
* sysdeps/unix/sysv/linux/powerpc/syscalls.list: Moved to...
* sysdeps/unix/sysv/linux/powerpc/powerpc32/syscalls.list: ...here.
Support PowerPC64. Separate powerpc into powerpc/powerpc32 and
powerpc/powerpc64.
2002-07-29 Steven Munroe <sjmunroe@us.ibm.com>
* FAQ.in: Add powerpc64 to supported targets list. Also state the
minimum gcc version is 3.2
* README: Add powerpc64 to supported targets list.
* configure.in: Change machine=powerpc to machine=powerpc/powerpc32.
Add powerpc64 and machine=powerpc/powerpc64.
(HAVE_ASM_GLOBAL_DOT_NAME): Define if linux*powerpc/powerpc64*.
* shlib-versions: Set DEFAULT version to 2.2.5 for powerpc64.
* sysdeps/powerpc/Dist: Remove dl-machine.c, dl-start.S, ppc-mcount.S,
gprsave1.S, gprsave0.S, gprrest1.S, and gprrest0.S.
* sysdeps/powerpc/powerpc32/Dist: New file.
* sysdeps/powerpc/Implies: Remove wordsize-32 and powerpc/soft-fp.
* sysdeps/powerpc/powerpc32/Implies: New file.
* sysdeps/powerpc/Makefile(cflags): Remove powerpc32 specific cflags.
($(with-fp) = no): Move test to powerpc32/Makefile.
($(subdir) = misc): Move to powerpc32/Makefile.
($(build-shared) = yes): Move to powerpc32/Makefile.
($(subdir) = csu): Move to powerpc32/Makefile.
(sysdep-rtld-routines): Remove dl-start. Moved these bits to ...
* sysdeps/powerpc/powerpc32/Makefile: New file.
* sysdeps/powerpc/Versions: Remove libgcc functions.
* sysdeps/powerpc/powerpc32/Versions: New file.
* sysdeps/powerpc/fpu/Makefile: Remove fprsave and fprrest.
* sysdeps/powerpc/powerpc32/fpu/Makefile: New file.
* sysdeps/unix/sysv/linux/configure.in (powerpc*):
Set arch_minimum_kernel=2.4.19 for powerpc/powerpc64. Also set
libc_cv_gcc_unwind_find_fde=yes only if !powerpc/powerpc64.
($machine): Add powerpc/powerpc64 to if ... | for
libc_cv_slibdir=/libc64.
(powerpc*): Set ldd_rewrite_script.
* sysdeps/unix/sysv/linux/powerpc/ldd-rewrite.sed: New file.
* sysdeps/unix/sysv/linux/powerpc/Dist: Remove clone.S.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/Dist: New file.
Add clone.S.
* sysdeps/unix/sysv/linux/powerpc/Makefile: Remove oldgetrlimit64.
* sysdeps/unix/sysv/linux/powerpc/Versions: Remove GLIBC_2.0
functions. Remove GLIBC_2.2 functions except getrlimit and
setrlimit. Moved them to ...
* sysdeps/unix/sysv/linux/powerpc/powerpc32/Versions: New file.
2002-09-04 Ulrich Drepper <drepper@redhat.com>
* libio/tst-atime.c: Include <errno.h>.
(do_test): Only perform fstatvfs check if ST_NOATIME is defined.
2002-09-03 Isamu Hasegawa <isamu@yamato.ibm.com>
* posix/regcomp.c (regcomp): Append "__restrict" modifier to avoid
warnings of some compilers.
(build_collating_symbol): Change the type of characters from
"unsigned char" to "char", and append a cast to "char*" pointer in
array subscript.
(build_collating_symbol): Likewise.
(build_equiv_class): Likewise.
(build_charclass): Likewise.
(re_compile_pattern): Remove incorrect cast.
(re_compile_fastmap_iter): Change the type of characters from
"unsigned char" to "char", and append a cast to "char*" pointer
in array subscript.
(parse_bracket_exp): Likewise.
* posix/regex_internal.c (re_string_construct_common): Likewise.
(re_string_allocate): Likewise.
(re_string_construct): Likewise.
(re_string_realloc_buffers): Likewise.
(build_wcs_buffer): Likewise.
(re_string_reconstruct): Likewise.
* posix/regex_internal.h: Change the type of characters in
re_string_t and bracket_elem_t from "unsigned char" to "char".
* posix/regexec.c (regexec): Append "__restrict" modifier to avoid
warnings of some compilers.
(transit_state_bkref_loop): Change the type of characters from
"unsigned char" to "char", and append a cast to "char*" pointer in
array subscript.
(check_node_accept_bytes): Likewise.
(find_collation_sequence_value): Likewise.