The Linux 3.2 clock_getres kernel code (kernel/posix-cpu-timers.c)
issued for clock_getres CLOCK_PROCESS_CPUTIME_ID (process_cpu_clock_getres)
and CLOCK_THREAD_CPUTIME_ID (thread_cpu_clock_getres) call
posix_cpu_clock_getres. And it fails on check_clock only if an invalid
clock is used (not the case) or if we pass an invalid the pid/tid in
29 msb of clock_id (not the case either).
This patch assumes that clock_getres syscall always support
CLOCK_PROCESS_CPUTIME_ID and CLOCK_THREAD_CPUTIME_ID, so there is no need
to fallback to hp-timing support for _SC_MONOTONIC_CLOCK neither to issue
the syscall to certify the clock_id is supported bt the kernel. This
allows simplify the sysconf support to always use the syscall.
it also removes ia64 itc drift check and assume kernel handles it correctly.
Checked on aarch64-linux-gnu, x86_64-linux-gnu, and i686-linux-gnu.
* sysdeps/unix/sysv/linux/ia64/has_cpuclock.c: Remove file.
* sysdeps/unix/sysv/linux/ia64/sysconf.c: Likewise.
* sysdeps/unix/sysv/linux/sysconf.c (has_cpuclock): Remove function.
(__sysconf): Assume kernel support for _SC_MONOTONIC_CLOCK,
_SC_CPUTIME, and _SC_THREAD_CPUTIME.
This patch removes CLOCK_THREAD_CPUTIME_ID and CLOCK_PROCESS_CPUTIME_ID support
from clock_gettime and clock_settime generic implementation. For Linux, kernel
already provides supports through the syscall and Hurd HTL lacks
__pthread_clock_gettime and __pthread_clock_settime internal implementation.
As described in clock_gettime man-page [1] on 'Historical note for SMP
system', implementing CLOCK_{THREAD,PROCESS}_CPUTIME_ID with timer registers
is error-prone and susceptible to timing and accurary issues that the libc
can not deal without kernel support.
This allows removes unused code which, however, still incur in some runtime
overhead in thread creation (the struct pthread cpuclock_offset
initialization).
If hurd eventually wants to support them it should either either implement as
a kernel facility (or something related due its architecture) or in system
specific implementation.
Checked on aarch64-linux-gnu, x86_64-linux-gnu, and i686-linux-gnu. I also
checked on a i686-gnu build.
* nptl/Makefile (libpthread-routines): Remove pthread_clock_gettime and
pthread_clock_settime.
* nptl/pthreadP.h (__find_thread_by_id): Remove prototype.
* elf/dl-support.c [!HP_TIMING_NOAVAIL] (_dl_cpuclock_offset): Remove.
(_dl_non_dynamic_init): Remove _dl_cpuclock_offset setting.
* elf/rtld.c (_dl_start_final): Likewise.
* nptl/allocatestack.c (__find_thread_by_id): Remove function.
* sysdeps/generic/ldsodefs.h [!HP_TIMING_NOAVAIL] (_dl_cpuclock_offset):
Remove.
* sysdeps/mach/hurd/dl-sysdep.c [!HP_TIMING_NOAVAIL]
(_dl_cpuclock_offset): Remove.
* nptl/descr.h (struct pthread): Rename cpuclock_offset to
cpuclock_offset_ununsed.
* nptl/nptl-init.c (__pthread_initialize_minimal_internal): Remove
cpuclock_offset set.
* nptl/pthread_create.c (START_THREAD_DEFN): Likewise.
* sysdeps/nptl/fork.c (__libc_fork): Likewise.
* nptl/pthread_clock_gettime.c: Remove file.
* nptl/pthread_clock_settime.c: Likewise.
* sysdeps/unix/clock_gettime.c (hp_timing_gettime): Remove function.
[HP_TIMING_AVAIL] (realtime_gettime): Remove CLOCK_THREAD_CPUTIME_ID
and CLOCK_PROCESS_CPUTIME_ID support.
* sysdeps/unix/clock_settime.c (hp_timing_gettime): Likewise.
[HP_TIMING_AVAIL] (realtime_gettime): Likewise.
* sysdeps/posix/clock_getres.c (hp_timing_getres): Likewise.
[HP_TIMING_AVAIL] (__clock_getres): Likewise.
* sysdeps/unix/clock_nanosleep.c (CPUCLOCK_P, INVALID_CLOCK_P):
Likewise.
(__clock_nanosleep): Remove CPUCLOCK_P and INVALID_CLOCK_P usage.
[1] http://man7.org/linux/man-pages/man2/clock_gettime.2.html
This patch adds new AArch64 HWCAPs from Linux 5.0 to the AArch64
bits/hwcap.h and dl-procinfo.c.
Tested (compilation only) with build-many-glibcs.py for
aarch64-linux-gnu.
* sysdeps/unix/sysv/linux/aarch64/bits/hwcap.h (HWCAP_SB): New
macro.
(HWCAP_PACA): Likewise.
(HWCAP_PACG): Likewise.
* sysdeps/unix/sysv/linux/aarch64/dl-procinfo.c (_DL_HWCAP_COUNT):
Increase to 32.
(_dl_aarch64_cap_flags): Add new entries for new HWCAPs.
This patch updates sysdeps/unix/sysv/linux/syscall-names.list for
Linux 5.0. Based on testing with build-many-glibcs.py, the only new
entry needed is for old_getpagesize (a newly added __NR_* name for an
old syscall on ia64). (Because 5.0 changes how syscall tables are
handled in the kernel, checking diffs wasn't a useful way of looking
for new syscalls in 5.0 as most of the syscall tables were moved to
the new representation without actually adding any syscalls to them.)
Tested with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/syscall-names.list: Update kernel
version to 5.0.
(old_getpagesize): New syscall.
The stub implementations are turned into compat symbols.
Linux actually has two reserved system call numbers (for getpmsg
and putpmsg), but these system calls have never been implemented,
and there are no plans to implement them, so this patch replaces
the wrappers with the generic stubs.
According to <https://bugzilla.redhat.com/show_bug.cgi?id=436349>,
the presence of the XSI STREAMS declarations is a minor portability
hazard because they are not actually implemented.
This commit does not change the TIRPC support code in
sunrpc/rpc_svcout.c. It uses additional XTI functionality and
therefore never worked with glibc.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Starting with commit 1616d034b6
the output was corrupted on some platforms as _dl_procinfo
was called for every auxv entry and on some architectures like s390
all entries were represented as "AT_HWCAP".
This patch is removing the condition and let _dl_procinfo decide if
an entry is printed in a platform specific or generic way.
This patch also adjusts all _dl_procinfo implementations which assumed
that they are only called for AT_HWCAP or AT_HWCAP2. They are now just
returning a non-zero-value for entries which are not handled platform
specifc.
ChangeLog:
* elf/dl-sysdep.c (_dl_show_auxv): Remove condition and always
call _dl_procinfo.
* sysdeps/unix/sysv/linux/s390/dl-procinfo.h (_dl_procinfo):
Ignore types other than AT_HWCAP.
* sysdeps/sparc/dl-procinfo.h (_dl_procinfo): Likewise.
* sysdeps/unix/sysv/linux/i386/dl-procinfo.h (_dl_procinfo):
Likewise.
* sysdeps/powerpc/dl-procinfo.h (_dl_procinfo): Adjust comment
in the case of falling back to generic output mechanism.
* sysdeps/unix/sysv/linux/arm/dl-procinfo.h (_dl_procinfo):
Likewise.
Mark the lr register as undefined at the start of execution, so unwind
will stop at this frame. run-backtrace-*.sh from elfutils testsuite will
fail without this patch.
* sysdeps/csky/abiv2/start.S: Mark lr as undefined.
* sysdeps/unix/sysv/linux/csky/abiv2/clone.S: Likewise.
* sysdeps/unix/sysv/linux/csky/abiv2/setcontext.S: Likewise.
C-SKY GDB dose not use this file for ptrace and coredump. ptrace can use
pt_regs definition from linux kernel directly. The old definition only
got 34 regs instead of 38 regs from linux kernel, which will corrupted
the memory after ptrace PTRACE_GETREGSET call.
* sysdeps/unix/sysv/linux/csky/sys/procfs.h: Use linux definition
directly.
* sysdeps/unix/sysv/linux/csky/sys/user.h: Remove user_regs
definition.
C-SKY defines SIGCONTEXT as siginfo_t *_si, struct ucontext_t * for
__profil_counter. ucontext_t get an extra __mask field which is miss
match with the struct sigcontext from linux kernel. The time value
from gprof report will be always zero without this patch. This
patch also fix the registers sequence in register-dump.h.
* sysdeps/unix/sysv/linux/csky/register-dump.h: Adjust offset change.
* sysdeps/unix/sysv/linux/csky/sys/ucontext.h: Remove __mask field
in mcontext_t
This patch fixes further coding style issues where code should have
broken lines before operators in accordance with the GNU Coding
Standards but instead was breaking lines after them.
Tested for x86_64, and with build-many-glibcs.py.
* stdio-common/vfscanf-internal.c (ARG): Break lines before rather
than after operators.
* sysdeps/mach/hurd/setitimer.c (timer_thread): Likewise.
(setitimer_locked): Likewise.
* sysdeps/mach/hurd/sigaction.c (__sigaction): Likewise.
* sysdeps/mach/hurd/sigaltstack.c (__sigaltstack): Likewise.
* sysdeps/mach/pagecopy.h (PAGE_COPY_FWD): Likewise.
* sysdeps/mach/thread_state.h (machine_get_basic_state): Likewise.
* sysdeps/powerpc/powerpc64/tst-ucontext-ppc64-vscr.c
(PPC_CPU_SUPPORTED): Likewise.
* sysdeps/unix/sysv/linux/alpha/a.out.h (N_TXTOFF): Likewise.
* sysdeps/unix/sysv/linux/generic/wordsize-32/overflow.h
(stat_overflow): Likewise.
(statfs_overflow): Likewise.
* sysdeps/unix/sysv/linux/tst-personality.c (do_test): Likewise.
* sysdeps/unix/sysv/linux/tst-ttyname.c (eq_ttyname): Likewise.
(eq_ttyname_r): Likewise.
(run_chroot_tests): Likewise.
This patch assumes realtime clock support for nptl and thus removes
all the associated code.
For __pthread_mutex_timedlock the fallback usage for the case where
lll_futex_timed_wait_bitset it not set define is also removed. The
generic lowlevellock-futex.h always define it, so for NPTL code the
check always yield true.
Checked on x86_64-linux-gnu and i686-linux-gnu.
* nptl/nptl-init.c (__have_futex_clock_realtime,
__have_futex_clock_realtime): Remove definition.
(__pthread_initialize_minimal_internal): Remove FUTEX_CLOCK_REALTIME
check test for !__ASSUME_FUTEX_CLOCK_REALTIME.
* nptl/pthread_mutex_timedlock.c (__pthread_mutex_timedlock): Assume
__ASSUME_FUTEX_CLOCK_REALTIME support.
* sysdeps/unix/sysv/linux/i386/lowlevellock.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/lowlevellock.S: Likewise.
* sysdeps/unix/sysv/linux/kernel-features.h
(__ASSUME_FUTEX_CLOCK_REALTIME): Remove.
* sysdeps/nptl/lowlevellock-futex.h (lll_futex_timed_wait_bitset):
Adjust comment.
On platforms where long double may have the same format as double
(-mlong-double-64), error and error_at_line do not take that into
account and might produce wrong output if a long double conversion is
requested by the format string ('%Lf'). This patch adds compatibility
functions for this situation and redirects calls via header magic.
Tested for powerpc, powerpc64 and powerpc64le.
When support for long double format with 128-bits (-mlong-double-128)
was added for platforms where long double had the same format as double,
such as powerpc, compatibility versions for the functions listed in the
commit title were missed. Since the older format of long double can
still be used (with -mlong-double-64), using these functions with a
format string that requests the printing of long double variables will
produce wrong outputs.
This patch adds the missing compatibility functions and header magic to
redirect calls to them when -mlong-double-64 is in use.
Tested for powerpc, powerpc64 and powerpc64le.
The functions argp_error and argp_failure are missing support for
printing long double values when long double has the same format as
double. This patch adds the new functions __nldbl_argp_error and
__nldbl_argp_failure, as well as header magic to redirect calls to them
when -mlong-double-64 is in use.
Tested for powerpc, powerpc64 and powerpc64le.
This patch fixes more places where a space should have been present
before '(' in accordance with the GNU Coding Standards (as with the
previous patch, mainly for calls to sizeof).
Tested with build-many-glibcs.py.
* sysdeps/powerpc/powerpc32/dl-machine.c
(__elf_machine_fixup_plt): Use space before '('.
(__process_machine_rela): Likewise.
* sysdeps/powerpc/powerpc32/register-dump.h (register_dump):
Likewise.
* sysdeps/powerpc/powerpc64/le/fpu/sfp-machine.h (TI_BITS):
Likewise.
* sysdeps/powerpc/powerpc64/register-dump.h (register_dump):
Likewise.
* sysdeps/powerpc/test-arith.c (union_t): Likewise.
(pattern): Likewise.
(delta): Likewise.
(check_result): Likewise.
(check_excepts): Likewise.
(check_op): Likewise.
(fail_xr): Likewise.
* sysdeps/unix/alpha/sysdep.h (syscall_promote): Likewise.
* sysdeps/unix/sysv/linux/alpha/a.out.h (AOUTHSZ): Likewise.
(SCNHSZ): Likewise.
* sysdeps/unix/sysv/linux/hppa/makecontext.c (FRAME_SIZE_BYTES):
Likewise.
(ARGS): Likewise.
(__makecontext): Likewise.
* sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h (ucontext_t):
Likewise.
From time to time the test misc/tst-clone3 fails with a timeout.
Then futex_wait is blocking. Usually ctid should be set to zero
due to CLONE_CHILD_CLEARTID and the futex should be waken up.
But the fail occures if the thread has already exited before
ctid is set to the return value of clone(). Then futex_wait() will
block as there will be nobody who wakes the futex up again.
This patch initializes ctid to a known value before calling clone
and the kernel is the only one who updates the value to zero after clone.
If futex_wait is called then it is either waked up due to the exited thread
or the futex syscall fails as *ctid_ptr is already zero instead of the
specified value 1.
ChangeLog:
* sysdeps/unix/sysv/linux/tst-clone3.c (do_test):
Initialize ctid with a known value and remove update of ctid
after clone.
(wait_tid): Adjust arguments and call futex_wait with ctid_val
as assumed current value of ctid_ptr.
With internal fcntl64 internal (commit 06ab719d), it is possible to
consolidate lockf implementation by using the LFS fcntl interface
instead of using arch and system-specific implementations.
For Linux, the i386 implementation is used as generic implementation
by replacing the direct syscall with fcntl64 call. The LFS symbol
alias for default LFS ABI (__OFF_T_MATCHES_OFF64_T) is used to avoid
the duplicate symbol (instead of overriding the implementation with an
empty file).
For Hurd lockf64 semantic is changed: previous generic lockf64
implementation returned EOVERFLOW if LEN input is larger than 32-bit
off_t. However, Hurd fcntl64 implementation for F_GETLK64, F_SETLK64,
and F_SETLKW64 do accept off64_t inputs (__f_setlk accepts only off64_t
inputs).
Checked on i686-linux-gnu and x86_64-linux-gnu along with a i686-gnu
build.
* io/Makefile (tests): Add tst-lockf.
* io/lockf.c (lockf): Use __fcntl and only define for
!__OFF_T_MATCHES_OFF64_T.
* io/lockf64.c (__lockf64): Call __fcntl64 and alias to lockf for
__OFF_T_MATCHES_OFF64_T case.
* io/tst-lockf.c: New file.
* sysdeps/unix/sysv/linux/i386/lockf64.c: Remove file.
* sysdeps/unix/sysv/linux/arm/lockf64.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/lockf64.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/lockf64.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/lockf64.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/lockf64.c: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/lockf64.c: Likewise.
* sysdeps/unix/sysv/linux/sh/lockf64.c: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/lockf64.c: Likewise.
Patch ce7eb0e903 ("nptl: Cleanup cancellation macros") changed the
join sequence for internal common __pthread_timedjoin_ex to use the
new macro lll_wait_tid. The idea was this macro would issue the
cancellable futex operation depending whether the timeout is used or
not. However if a timeout is used, __lll_timedwait_tid is called and
it is not a cancellable entrypoint.
This patch fixes it by simplifying the code in various ways:
- Instead of adding the cancellation handling on __lll_timedwait_tid,
it moves the generic implementation to pthread_join_common.c (called
now timedwait_tid with some fixes to use the correct type for pid).
- The llvm_wait_tid macro is removed, along with its replication on
x86_64, i686, and sparc arch-specific lowlevellock.h.
- sparc32 __lll_timedwait_tid is also removed, since the code is similar
to generic one.
- x86_64 and i386 provides arch-specific __lll_timedwait_tid which is
also removed since they are similar in functionality to generic C code
and there is no indication it is better than compiler generated code.
New tests, tst-join8 and tst-join9, are provided to check if
pthread_timedjoin_np acts as a cancellation point.
Checked on x86_64-linux-gnu, i686-linux-gnu, sparcv9-linux-gnu, and
aarch64-linux-gnu.
[BZ #24215]
* nptl/Makefile (lpthread-routines): Remove lll_timedwait_tid.
(tests): Add tst-join8 tst-join9.
* nptl/lll_timedwait_tid.c: Remove file.
* sysdeps/sparc/sparc32/lll_timedwait_tid.c: Likewise.
* sysdeps/unix/sysv/linux/i386/lll_timedwait_tid.c: Likewise.
* sysdeps/sysv/linux/x86_64/lll_timedwait_tid.c: Likewise.
* nptl/pthread_join_common.c (timedwait_tid): New function.
(__pthread_timedjoin_ex): Act as cancellation entrypoint is block
is set.
* nptl/tst-join5.c (thread_join): New function.
(tf1, tf2, do_test): Use libsupport and add pthread_timedjoin_np
check.
* nptl/tst-join8.c: New file.
* nptl/tst-join9.c: Likewise.
* sysdeps/nptl/lowlevellock-futex.h (lll_futex_wait_cancel,
lll_futex_timed_wait_cancel): Add generic macros.
* sysdeps/nptl/lowlevellock.h (__lll_timedwait_tid, lll_wait_tid):
Remove definitions.
* sysdeps/unix/sysv/linux/i386/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/x86_64/lowlevellock.h: Likewise.
* sysdeps/sparc/sparc32/lowlevellock.c (__lll_timedwait_tid):
Remove function.
* sysdeps/unix/sysv/linux/i386/lowlevellock.S (__lll_timedwait_tid):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/lowlevellock.S: Likewise.
* sysdeps/unix/sysv/linux/lowlevellock-futex.h
(lll_futex_timed_wait_cancel): New macro.
The clone.S patch fixes 2 elfutils testsuite unwind failures, where the
backtrace gets stuck repeating __thread_start until we hit the backtrace
limit. This was confirmed by building and installing a patched glibc and
then building elfutils and running its testsuite.
Unfortunately, the testcase isn't working as expected and I don't know why.
The testcase passes even when my clone.S patch is not installed. The testcase
looks logically similarly to the elfutils testcases that are failing. Maybe
there is a subtle difference in how the glibc unwinding works versus the
elfutils unwinding? I don't have good gdb pthread support yet, so I haven't
found a way to debug this. Anyways, I don't know if the testcase is useful or
not. If the testcase isn't useful then maybe the clone.S patch is OK without
a testcase?
Jim
[BZ #24040]
* elf/Makefile (CFLAGS-tst-unwind-main.c): Add -DUSE_PTHREADS=0.
* elf/tst-unwind-main.c: If USE_PTHEADS, include pthread.h and error.h
(func): New.
(main): If USE_PTHREADS, call pthread_create to run func. Otherwise
call func directly.
* nptl/Makefile (tests): Add tst-unwind-thread.
(CFLAGS-tst-unwind-thread.c): Define.
* nptl/tst-unwind-thread.c: New file.
* sysdeps/unix/sysv/linux/riscv/clone.S (__thread_start): Mark ra
as undefined.
This commit adds gettid to <unistd.h> on Linux, and not to the
kernel-independent GNU API.
gettid is now supportable on Linux because too many things assume a
1:1 mapping between libpthread threads and kernel threads.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
One group of warnings seen with -Wextra is warnings for static or
inline not at the start of a declaration (-Wold-style-declaration).
This patch fixes various such cases for inline, ensuring it comes at
the start of the declaration (after any static). A common case of the
fix is "static inline <type> __always_inline"; the definition of
__always_inline starts with __inline, so the natural change is to
"static __always_inline <type>". Other cases of the warning may be
harder to fix (one pattern is a function definition that gets
rewritten to be static by an including file, "#define funcname static
wrapped_funcname" or similar), but it seems worth fixing these cases
with inline anyway.
Tested for x86_64.
* elf/dl-load.h (_dl_postprocess_loadcmd): Use __always_inline
before return type, without separate inline.
* elf/dl-tunables.c (maybe_enable_malloc_check): Likewise.
* elf/dl-tunables.h (tunable_is_name): Likewise.
* malloc/malloc.c (do_set_trim_threshold): Likewise.
(do_set_top_pad): Likewise.
(do_set_mmap_threshold): Likewise.
(do_set_mmaps_max): Likewise.
(do_set_mallopt_check): Likewise.
(do_set_perturb_byte): Likewise.
(do_set_arena_test): Likewise.
(do_set_arena_max): Likewise.
(do_set_tcache_max): Likewise.
(do_set_tcache_count): Likewise.
(do_set_tcache_unsorted_limit): Likewise.
* nis/nis_subr.c (count_dots): Likewise.
* nptl/allocatestack.c (advise_stack_range): Likewise.
* sysdeps/ieee754/dbl-64/s_sin.c (do_cos): Likewise.
(do_sin): Likewise.
(reduce_sincos): Likewise.
(do_sincos): Likewise.
* sysdeps/unix/sysv/linux/x86/elision-conf.c
(do_set_elision_enable): Likewise.
(TUNABLE_CALLBACK_FNDECL): Likewise.
In the i386 case, it appears that the sole remaining LIBC_PROBE was
removed in commit a9fe4c5aa8 ("Support
six-argument syscalls from C for 32-bit x86, use generic
lowlevellock-futex.h (bug 18138)."), when
sysdeps/unix/sysv/linux/i386/lowlevellock-futex.h was replaced with
the generic version.
For x86_64, the relevant change is commit
76f71081cd ("Use generic
lowlevellock-futex.h in x86_64 lowlevellock.h."), again by using the
generic version of <lowlevellock-futex.h>.
Tested on i386 and x86_64, with and without --enable-systemtap.
On Linux, we define _POSIX_PRIORITY_SCHEDULING, but functions such
as sched_setparam and sched_setscheduler apply to individual threads,
not processes.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Clock_gettime, settime and getres implementations are unncessarily
complex due to using defines and C file inclusion. Simplify the
code by replacing the redundant defines and removing the inclusion,
making it much easier to understand. No functional changes.
* sysdeps/posix/clock_getres.c (__clock_getres): Cleanup.
* sysdeps/unix/clock_gettime.c (__clock_gettime): Cleanup.
* sysdeps/unix/clock_settime.c (__clock_settime): Cleanup.
* sysdeps/unix/sysv/linux/clock_getres.c (__clock_getres): Cleanup.
* sysdeps/unix/sysv/linux/clock_gettime.c (__clock_gettime): Cleanup.
* sysdeps/unix/sysv/linux/clock_settime.c (__clock_settime): Cleanup.
Emag is a 64-bit CPU core released by AmpereComputing.
Add its name to cpu list, and corresponding macro as utilities for
later IFUNC dispatch.
* manual/tunables.texi (Tunable glibc.cpu.name): Add emag.
* sysdeps/unix/sysv/linux/aarch64/cpu-features.c (cpu_list):
Add emag.
* sysdeps/unix/sysv/linux/aarch64/cpu-features.h (IS_EMAG):
New macro.
This patch fix VSCR position on ucontext. VSCR was read in the wrong
position on ucontext structure because it was ignoring the machine
endianess.
[BZ #24088]
* sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h (vscr_t): Added
ifdef to fix read of VSCR.
* sysdeps/powerpc/powerpc64/Makefile [$subdir == stdlib]: Add
tst-ucontext-ppc64-vscr.c to test list.
* sysdeps/powerpc/powerpc64/tst-ucontext-ppc64-vscr.c: New test file.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Add Ares to the midr_el0 list and support ifunc dispatch. Since Ares
supports 2 128-bit loads/stores, use Neon registers for memcpy by
selecting __memcpy_falkor by default (we should rename this to
__memcpy_simd or similar).
* manual/tunables.texi (glibc.cpu.name): Add ares tunable.
* sysdeps/aarch64/multiarch/memcpy.c (__libc_memcpy): Use
__memcpy_falkor for ares.
* sysdeps/unix/sysv/linux/aarch64/cpu-features.h (IS_ARES):
Add new define.
* sysdeps/unix/sysv/linux/aarch64/cpu-features.c (cpu_list):
Add ares cpu.
An attempt to re-create a different PTY under the same name can fail
if the PTY has a very high number. Try to increase the file
descriptor limit in this case, and bail out if this still does not
allow the test to proceed.
This patch wraps all uses of *_{enable,disable}_asynccancel and
and *_CANCEL_{ASYNC,RESET} in either already provided macros
(lll_futex_timed_wait_cancel) or creates new ones if the
functionality is not provided (SYSCALL_CANCEL_NCS, lll_futex_wait_cancel,
and lll_futex_timed_wait_cancel).
Also for some generic implementations, the direct call of the macros
are removed since the underlying symbols are suppose to provide
cancellation support.
This is a priliminary patch intended to simplify the work required
for BZ#12683 fix. It is a refactor change, no semantic changes are
expected.
Checked on x86_64-linux-gnu and i686-linux-gnu.
* nptl/pthread_join_common.c (__pthread_timedjoin_ex): Use
lll_wait_tid with timeout.
* nptl/sem_wait.c (__old_sem_wait): Use lll_futex_wait_cancel.
* sysdeps/nptl/aio_misc.h (AIO_MISC_WAIT): Use
futex_reltimed_wait_cancelable for cancelabla mode.
* sysdeps/nptl/gai_misc.h (GAI_MISC_WAIT): Likewise.
* sysdeps/posix/open64.c (__libc_open64): Do not call cancelation
macros.
* sysdeps/posix/sigwait.c (__sigwait): Likewise.
* sysdeps/posix/waitid.c (__sigwait): Likewise.
* sysdeps/unix/sysdep.h (__SYSCALL_CANCEL_CALL,
SYSCALL_CANCEL_NCS): New macro.
* sysdeps/nptl/lowlevellock.h (lll_wait_tid): Add timeout argument.
(lll_timedwait_tid): Remove macro.
* sysdeps/unix/sysv/linux/i386/lowlevellock.h (lll_wait_tid):
Likewise.
(lll_timedwait_tid): Likewise.
* sysdeps/unix/sysv/linux/sparc/lowlevellock.h (lll_wait_tid):
Likewise.
(lll_timedwait_tid): Likewise.
* sysdeps/unix/sysv/linux/x86_64/lowlevellock.h (lll_wait_tid):
Likewise.
(lll_timedwait_tid): Likewise.
* sysdeps/unix/sysv/linux/clock_nanosleep.c (__clock_nanosleep):
Use INTERNAL_SYSCALL_CANCEL.
* sysdeps/unix/sysv/linux/futex-internal.h
(futex_reltimed_wait_cancelable): Use LIBC_CANCEL_{ASYNC,RESET}
instead of __pthread_{enable,disable}_asynccancel.
* sysdeps/unix/sysv/linux/lowlevellock-futex.h
(lll_futex_wait_cancel): New macro.
bits/hwcap.h should be updated together with dl-procinfo.c.
* sysdeps/unix/sysv/linux/aarch64/bits/hwcap.h: Add comment.
* sysdeps/unix/sysv/linux/aarch64/dl-procinfo.c (_DL_HWCAP_COUNT):
Update.
Austin Group issue #411 [1] proposes that posix_spawn file action
posix_spawn_file_actions_adddup2 resets the close-on-exec when
source and destination refer to same file descriptor.
It solves the issue on multi-thread applications which uses
close-on-exec as default, and want to hand-chose specifically
file descriptor to purposefully inherited into a child process.
Current approach to achieve this scenario is to use two adddup2 file
actions and a temporary file description which do not conflict with
any other, coupled with a close file action to avoid leaking the
temporary file descriptor. This approach, besides being complex,
may fail with EMFILE/ENFILE file descriptor exaustion.
This can be more easily accomplished with an in-place removal of
FD_CLOEXEC. Although the resulting adddup2 semantic is slight
different than dup2 (equal file descriptors should be handled as
no-op), the proposed possible solution are either more complex
(fcntl action which a limited set of operations) or results in
unrequired operations (dup3 which also returns EINVAL for same
file descriptor).
Checked on aarch64-linux-gnu.
[BZ #23640]
* posix/tst-spawn.c (do_prepare, handle_restart, do_test): Add
posix_spawn_file_actions_adddup2 test to check O_CLOCEXEC reset.
* sysdeps/unix/sysv/linux/spawni.c (__spawni_child): Add
close-on-exec reset for adddup2 file action.
* sysdeps/posix/spawni.c (__spawni_child): Likewise.
[1] http://austingroupbugs.net/view.php?id=411
This patch consolidates the Linux termios.h by removing the arch-specific
one.
No semantic change is expected, checked on a build against x86_64-linux-gnu,
alpha-linux-gnu, mips64-linux-gnu, and sparc64-linux-gnu.
* sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add
bits/termios-misc.h.
* sysdeps/unix/sysv/linux/alpha/bits/termios.h: Remove file.
* sysdeps/unix/sysv/linux/mips/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/bits/termios-misc.h: New file.
* sysdeps/unix/sysv/linux/bits/termios.h: Include termios-misc.h.
It is used only on hurd.
No semantic change is expected, checked on a build against x86_64-linux-gnu,
alpha-linux-gnu, mips64-linux-gnu, and sparc64-linux-gnu.
* sysdeps/unix/sysv/linux/bits/termios.h (_IOT_termios): Remove.
* sysdeps/unix/sysv/linux/alpha/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/mips/bits/termios.h: Likewise.
This patch consolidates the termios symbolic constants for use with tcflow
in its own header. The Linux generic implementation values match the
kernel UAPI and each architecture with deviate values have their own
implementation (currently only mips).
No semantic change is expected, checked on a build against x86_64-linux-gnu,
alpha-linux-gnu, mips64-linux-gnu, and sparc64-linux-gnu.
* sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add
termios-tcflow.h.
* sysdeps/unix/sysv/linux/bits/termios-tcflow.h: New file.
* sysdeps/unix/sysv/linux/mips/bits/termios-tcflow.h: Likewise.
* sysdeps/unix/sysv/linux/bits/termios.h (TCSANOW, TCSADRAIN,
TCSAFLUSH): Move to termios-tcflow.h.
* sysdeps/unix/sysv/linux/alpha/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/mips/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/termios.h: Likewise.
This patch consolidates the termios symbolic constants used for local
mode with c_lflag member on its own header. The Linux generic implementation
values match the kernel UAPI and each architecture with deviate values
have their own implementation (in this case alpha, mips, and powerpc).
No semantic change is expected, checked on a build against x86_64-linux-gnu,
alpha-linux-gnu, mips64-linux-gnu, and sparc64-linux-gnu.
* sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add
termios-c_lflag.h.
* sysdeps/unix/sysv/linux/bits/termios-c_lflag.h: New file.
* sysdeps/unix/sysv/linux/alpha/bits/termios-c_lflag.h: Likewise.
* sysdeps/unix/sysv/linux/mips/bits/termios-c_lflag.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/termios-c_lflag.h: Likewise.
* sysdeps/unix/sysv/linux/bits/termios.h (ISIG, ISCANON, ECHO, ECHOE,
ECHOK, ECHONL, NOFLSH, TOSTOP, IEXTEN): Move to termios-c_lflag.h.
[__USE_MISC || (__USE_XOPEN && !__USE_XOPEN2K)] (XCASE): Likewise.
[__USE_MISC] (ECHOCTL, ECHOPRT, ECHOKE, FLUSHO, PENDIN, EXTPROC):
Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/mips/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/termios.h: Likewise.
This patch consolidates the termios symbolic constants used for output
mode with c_cflag memver on its own header. The Linux generic
implementation values match the kernel UAPI and each architecture with
deviate values have their own implementation (in this case alpha and
powerpc).
No semantic change is expected, checked on a build against x86_64-linux-gnu,
alpha-linux-gnu, mips64-linux-gnu, and sparc64-linux-gnu.
* sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add
termios-c_cflag.h.
* sysdeps/unix/sysv/linux/bits/termios-c_cflag.h: New file.
* sysdeps/unix/sysv/linux/alpha/bits/termios-c_cflag.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/termios-c_cflag.h: Likewise.
* sysdeps/unix/sysv/linux/bits/termios.h (CSIZE, CS5, CS6, CS7, CS8,
CSTOPB, CREAD, PARENB, PARODD, HUPCL, CLOCAL): Move to
termios-c_cflag.h.
* sysdeps/unix/sysv/linux/alpha/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/mips/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/termios.h: Likewise.
This patch consolidates the termios symbolic constants used for baud rates
selection used along with speed_t on its own header. The Linux generic
implementation values match the kernel UAPI and each architecture with
deviate values have their own implementation (in this case alpha and
powerpc).
No semantic change is expected, checked on a build against x86_64-linux-gnu,
alpha-linux-gnu, mips64-linux-gnu, and sparc64-linux-gnu.
[BZ #23783]
* sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add
termios-baud.h.
* sysdeps/unix/sysv/linux/bits/termios-baud.h: New file.
* sysdeps/unix/sysv/linux/alpha/bits/termios-baud.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/termios-baud.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/termios-baud.h: Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/termios.h (B57600, B115200,
B230400, B460800, B500000, B576000, B921600, B1000000, B1152000,
B1500000, B2000000, B2500000, B3000000, B3500000, B4000000,
__MAX_BAUD): Move to termios-baud.h.
[__USE_MISC] (CBAUD, CBAUDEX): Likewise.
* sysdeps/unix/sysv/linux/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/mips/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/termios.h: Likewise.
This patch consolidates the termios symbolic constants used for ouput
modes with c_oflag member on its own header. The Linux generic implementation
values match the kernel UAPI and each architecture with deviate values
have their own implementation (in this case alpha, powerpc, and sparc).
No semantic change is expected, checked on a build against x86_64-linux-gnu,
alpha-linux-gnu, mips64-linux-gnu, and sparc64-linux-gnu.
* sysdeps/unix/sysv/linux/Makefile (sysdep_routines): Add
termios-c_oflag.h.
* sysdeps/unix/sysv/linux/bits/termios-c_oflag.h: New file.
* sysdeps/unix/sysv/linux/alpha/bits/termios-c_oflag.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/termios-c_oflag.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/termios-c_oflag.h: Likewise.
* sysdeps/unix/sysv/linux/bits/termios.h (OPOST, OLCUC, ONLCR, OCRNL,
ONOCR, ONLRET, OFILL, OFDEL, VTDLY, VT0, VT1): Move to
termios-c_oflag.h.
[__USE_MISC || __USE_XOPEN] (NLDLY, NL0, NL1, CRDLY, CR0, CR1, CR2,
CR3, TABDLY, TAB0, TAB1, TAB2, TAB3, BSDLY, BS0, BS1, FFDLY, FF0,
FFR1): Likewise.
[USE_MISC] (XTABS): Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/mips/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/termios.h Likewise.
This patch consolidates the termios symbolic constants used for input
modes with c_iflag member on its own header. The Linux generic implementation
values match the kernel UAPI and each architecture with deviate values
have their own implementation (in this case alpha and powerpc).
No semantic change is expected, checked on a build against x86_64-linux-gnu,
alpha-linux-gnu, mips64-linux-gnu, and sparc64-linux-gnu.
* sysdeps/unix/sysv/linux/Makefile (sysdeps_headers): Add
termios-c_iflag.h.
* sysdeps/unix/sysv/linux/bits/termios-c_iflag.h: New file.
* sysdeps/unix/sysv/linux/alpha/bits/termios-c_iflag.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/termios-c_iflag.h: Likewise.
* sysdeps/unix/sysv/linux/bits/termios.h (IGNBRK, BRKINT, IGNPAR, PARMRK,
INPCK, ISTRIP, INLCR, IGNCR, ICRNL, IXON, IXOFF, IXANY, IUCLC, IMAXBEL,
IUTF8): Move to termios-c_iflag.h.
* sysdeps/unix/sysv/linux/alpha/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/mips/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/termios.h: Likewise.
This patch consolidates the termios symbolic constants used as subscript
for the array c_cc on its own header. The Linux generic implementation
values match the kernel UAPI and each architecture with deviate values
have their own implementation (in this case alpha, mips64, sparc64, and
powerpc).
No semantic change is expected, checked on a build against x86_64-linux-gnu,
alpha-linux-gnu, mips64-linux-gnu, and sparc64-linux-gnu.
* sysdeps/unix/sysv/linux/Makefile (sysdeps_headers): Add
termios-cc.h.
* sysdeps/unix/sysv/linux/bits/termios-c_cc.h: Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/termios-c_cc.h: New file.
* sysdeps/unix/sysv/linux/mips/bits/termios-c_cc.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/termios-c_cc.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/termios-c_cc.h: Likewise.
* sysdeps/unix/sysv/linux/bits/termios.h (VINTR, VQUIT, VERASE,
VKILL, VEOF, VTIME, VMIN, VSWTC, VSTART, VSTOP, VSUSP, VEOL,
VREPRINT, VDISCARD, VWERASE, VLNEXT, VEOLF2): Move to termios-cc.h.
* sysdeps/unix/sysv/linux/alpha/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/mips/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/termios.h: Likewise.
This patch consolidates the struct termios definition on its own header
and adds arch-defined ones for ABIs that deviate from generic
implementation. They are:
- alpha which has a slight different layout than generic one (c_cc
field is defined prior c_line).
- sparc and mips which do not have the c_ispeed/c_ospeed fields.
No semantic change is expected, checked on a build against x86_64-linux-gnu,
alpha-linux-gnu, mips64-linux-gnu, and sparc64-linux-gnu.
* sysdeps/unix/sysv/linux/alpha/bits/termios-struct.h: New file.
* sysdeps/unix/sysv/linux/bits/termios-struct.h: Likewise.
* sysdeps/unix/sysv/linux/mips/bits/termios-struct.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/termios-struct.h: Likewise.
* sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add
termios-struct.h.
* sysdeps/unix/sysv/linux/bits/termios.h (struct termios): Move to
termios-struct.h.
* sysdeps/unix/sysv/linux/alpha/bits/termios.h (struct termios):
Likewise.
* sysdeps/unix/sysv/linux/mips/bits/termios.h (struct termios):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/termios.h (struct termios):
Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/termios.h (struct termios):
Likewise.
* sysdeps/unix/sysv/linux/kernel_termios.h (_HAVE_C_ISPEED,
_HAVE_C_OSPEED): Define.
* sysdeps/unix/sysv/linux/mips/kernel_termios.h (_HAVE_C_ISPEED,
_HAVE_C_OSPEED): Likewise.
* sysdeps/unix/sysv/linux/sparc/kernel_termios.h (_HAVE_C_ISPEED,
_HAVE_C_OSPEED): Likewise.
* sysdeps/unix/sysv/linux/speed.c [_HAVE_STRUCT_TERMIOS_C_OSPEED]
(cfsetospeed): Check for define value instead of existence.
[_HAVE_STRUCT_TERMIOS_C_ISPEED] (cfsetispeed): Likewise.
* sysdeps/unix/sysv/linux/tcgetattr.c [_HAVE_STRUCT_TERMIOS_C_ISPEED
&& _HAVE_C_ISPEED] (__tcgetattr): Likewise.
* sysdeps/unix/sysv/linux/tcsetattr.c [_HAVE_STRUCT_TERMIOS_C_ISPEED
&& _HAVE_C_ISPEED] (__tcsetattr): Likewise.
This patch defines TIOCSER_TEMT on all architectures using the __USE_MISC
guards similar to BZ#17782 fix. Latest Linux UAPI defines TIOCSER_TEMT
with the same value for all architectures, so it is safe to use the value
as default for all ABIs.
Checked on x86_64linux-gnu and build against sparc64-linux-gnu and
powerpc64le-linux-gnu.
[BZ #17783]
* sysdeps/unix/sysv/linux/bits/termios.h [__USE_MISC] (TIOCSER_TEMT):
Define.
* sysdeps/unix/sysv/linux/powerpc/bits/termios.h [__USE_MISC]
(TIOCSER_TEMT): Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/termios.h [__USE_MISC]
(TEOCSER_TEMT): Likewise.
This patch updates the Linux kernel version in tst-mman-consts.py to
4.20 (meaning that's the version for which glibc is expected to have
the same constants as the kernel, up to the exceptions listed in the
test). (Once we have more such tests sharing common infrastructure, I
expect the kernel version will be something set in the infrastructure
shared by all such tests, rather than something needing updating
separately for each test for each new kernel version.)
Tested with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/tst-mman-consts.py (main): Expect
constants to match with Linux 4.20.
The pre-ARMv7 CPUs are missing atomic compare and exchange and/or
barrier instructions. Therefore those are implemented using kernel
assistance, calling a kernel function at a specific address, and passing
the arguments in the r0 to r4 registers. This is done by specifying
registers for local variables. The a_ptr variable is placed in the r2
register and declared with __typeof (mem). According to the GCC
documentation on local register variables, if mem is a constant pointer,
the compiler may substitute the variable with its initializer in asm
statements, which may cause the corresponding operand to appear in a
different register.
This happens in __libc_start_main with the pointer to the thread counter
for static binaries (but not the shared ones):
# ifdef SHARED
unsigned int *ptr = __libc_pthread_functions.ptr_nthreads;
# ifdef PTR_DEMANGLE
PTR_DEMANGLE (ptr);
# endif
# else
extern unsigned int __nptl_nthreads __attribute ((weak));
unsigned int *const ptr = &__nptl_nthreads;
# endif
This causes static binaries using threads to crash when the GNU libc is
built with GCC 8 and most notably tst-cancel21-static.
To fix that, use the same trick than for the volatile qualifier,
defining a_ptr as a union.
Changelog:
[BZ #24034]
* sysdeps/unix/sysv/linux/arm/atomic-machine.h
(__arm_assisted_compare_and_exchange_val_32_acq): Use uint32_t rather
than __typeof (...) for the a_ptr variable.
This patch adds the IPV6_MULTICAST_ALL constant from Linux 4.20 to
bits/in.h.
Tested for x86_64.
* sysdeps/unix/sysv/linux/bits/in.h (IPV6_MULTICAST_ALL): New
macro.
This patch adds the PACKET_IGNORE_OUTGOING constant from Linux 4.20 to
netpacket/packet.h.
Tested for x86_64.
* sysdeps/unix/sysv/linux/netpacket/packet.h
(PACKET_IGNORE_OUTGOING): New macro.
This patch adds the HWCAP_SSBS constant from Linux 4.20 to the AArch64
bits/hwcap.h.
Tested with build-many-glibcs.py for aarch64-linux-gnu.
* sysdeps/unix/sysv/linux/aarch64/bits/hwcap.h (HWCAP_SSBS): New
macro.
This patch updates sysdeps/unix/sysv/linux/syscall-names.list for
Linux 4.20. Although there are no new syscalls, the
riscv_flush_icache syscall has moved to asm/unistd.h (previously in
asm/syscalls.h) and so now needs to be added to the list.
Tested with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/syscall-names.list: Update kernel
version to 4.20.
(riscv_flush_icache): New syscall.
<asm/syscalls.h> has been removed by
commit 27f8899d6002e11a6e2d995e29b8deab5aa9cc25
Author: David Abdurachmanov <david.abdurachmanov@gmail.com>
Date: Thu Nov 8 20:02:39 2018 +0100
riscv: add asm/unistd.h UAPI header
Marcin Juszkiewicz reported issues while generating syscall table for riscv
using 4.20-rc1. The patch refactors our unistd.h files to match some other
architectures.
- Add asm/unistd.h UAPI header, which has __ARCH_WANT_NEW_STAT only for 64-bit
- Remove asm/syscalls.h UAPI header and merge to asm/unistd.h
- Adjust kernel asm/unistd.h
So now asm/unistd.h UAPI header should show all syscalls for riscv.
<asm/syscalls.h> may be restored by
Subject: [PATCH] riscv: restore asm/syscalls.h UAPI header
Date: Tue, 11 Dec 2018 09:09:35 +0100
UAPI header asm/syscalls.h was merged into UAPI asm/unistd.h header,
which did resolve issue with missing syscalls macros resulting in
glibc (2.28) build failure. It also broke glibc in a different way:
asm/syscalls.h is being used by glibc. I noticed this while doing
Fedora 30/Rawhide mass rebuild.
The patch returns asm/syscalls.h header and incl. it into asm/unistd.h.
I plan to send a patch to glibc to use asm/unistd.h instead of
asm/syscalls.h
In the meantime, we use __has_include__, which was added to GCC 5, to
check if <asm/syscalls.h> exists before including it. Tested with
build-many-glibcs.py for riscv against kernel 4.19.12 and 4.20-rc7.
[BZ #24022]
* sysdeps/unix/sysv/linux/riscv/flush-icache.c: Check if
<asm/syscalls.h> exists with __has_include__ before including it.
The recent difftime changes introduced localplt test failures on nios2
and sparc32, two configurations where some soft-fp functions are
defined in / exported from libc.so, and where the difftime changes
affected the particular set of floating-point operations used in
libc.so. This patch adds those functions to localplt.data, alongside
other such functions already there. (In the sparc32 case, and more
generally on any platform where long double is a software
floating-point type, it would probably be more efficient to avoid
using long double at all in difftime, but that's a pre-existing
issue.)
Tested with build-many-glibcs.py for its nios2 and sparcv9
configurations.
[BZ #24023]
* sysdeps/unix/sysv/linux/nios2/localplt.data: Allow __floatundidf
PLT reference in libc.so.
* sysdeps/unix/sysv/linux/sparc/sparc32/localplt.data: Allow
_Q_lltoq and _Q_qtod PLT references in libc.so.
S390 kernel sigaction is the same as the Linux generic one.
Checked with a s390-linux-gnu and s390x-linux-gnu build.
* sysdeps/unix/sysv/linux/s390/kernel_sigaction.h: Use Linux generic
kernel_sigction definition.
IA64 kernel_sigaction.h definition is the sama as the Linux generic
one.
Checked on ia64-linux-gnu.
* sysdeps/unix/sysv/linux/ia64/kernel_sigaction.h: Remove file.
HPPA kernel_sigaction.h definition is the sama as the Linux generic
one and old_kernel_sigaction is not used.
Checked on hppa-linux-gnu.
* sysdeps/unix/sysv/linux/hppa/kernel_sigaction.h: Remove file.
Alpha rt_sigaction syscall uses a slight different kernel ABI than
generic one:
arch/alpha/kernel/signal.c
90 SYSCALL_DEFINE5(rt_sigaction, int, sig, const struct sigaction __user *, act,
91 struct sigaction __user *, oact,
92 size_t, sigsetsize, void __user *, restorer)
Similar as sparc, the syscall expects a restorer function. However
different than sparc, alpha defines the restorer as the 5th argument
(sparc defines as the 4th).
This patch removes the arch-specific alpha sigaction implementation,
adapt the Linux generic one to different restore placements (through
STUB macro), and make alpha use the Linux generic kernel_sigaction
definition.
Checked on alpha-linux-gnu and x86_64-linux-gnu (for sanity).
* sysdeps/unix/sysv/linux/alpha/Makefile: Update comment about
__syscall_rt_sigaction.
* sysdeps/unix/sysv/linux/alpha/kernel_sigaction.h
(kernel_sigaction): Use Linux generic defintion.
(STUB): Define.
(__syscall_rt_sigreturn, __syscall_sigreturn): Add prototype.
* sysdeps/unix/sysv/linux/alpha/rt_sigaction.S
(__syscall_rt_sigaction): Remove implementation.
(__syscall_sigreturn, __syscall_rt_sigreturn): Define as global and
hidden.
* sysdeps/unix/sysv/linux/alpha/sigaction.c: Remove file.
* sysdeps/unix/sysv/linux/alpha/sysdep.h (INLINE_SYSCALL,
INTERNAL_SYSCALL): Remove definitions.
* sysdeps/unix/sysv/linux/sigaction.c: Define STUB to accept both the
action and signal set size.
* sysdeps/unix/sysv/linux/sparc/sparc32/sigaction.c (STUB): Redefine.
* sysdeps/unix/sysv/linux/sparc/sparc64/sigaction.c (STUB): Likewise.
Commit b4a5d26d88 (linux: Consolidate sigaction implementation) added
a wrong kernel_sigaction definition for m68k, meant for __NR_sigaction
instead of __NR_rt_sigaction as used on generic Linux sigaction
implementation. This patch fixes it by using the Linux generic
definition meant for the RT kernel ABI.
Checked the signal tests on emulated m68-linux-gnu (Aranym). It fixes
the faulty signal/tst-sigaction and man works as expected.
Adhemerval Zanella <adhemerval.zanella@linaro.org>
James Clarke <jrtc27@jrtc27.com>
[BZ #23960]
* sysdeps/unix/sysv/linux/kernel_sigaction.h (HAS_SA_RESTORER):
Define if SA_RESTORER is defined.
(kernel_sigaction): Define sa_restorer if HAS_SA_RESTORER is defined.
(SET_SA_RESTORER, RESET_SA_RESTORER): Define iff the macro are not
already defined.
* sysdeps/unix/sysv/linux/m68k/kernel_sigaction.h (SA_RESTORER,
kernel_sigaction, SET_SA_RESTORER, RESET_SA_RESTORER): Remove
definitions.
(HAS_SA_RESTORER): Define.
* sysdeps/unix/sysv/linux/sparc/kernel_sigaction.h (SA_RESTORER,
SET_SA_RESTORER, RESET_SA_RESTORER): Remove definition.
(HAS_SA_RESTORER): Define.
* sysdeps/unix/sysv/linux/nios2/kernel_sigaction.h: Include generic
kernel_sigaction after define SET_SA_RESTORER and RESET_SA_RESTORER.
* sysdeps/unix/sysv/linux/powerpc/kernel_sigaction.h: Likewise.
* sysdeps/unix/sysv/linux/x86_64/sigaction.c: Likewise.
kernel-features.h has a macro __ASSUME_ST_INO_64_BIT, with a comment
"However, SH is lame, and still does not have a 64-bit inode field.".
The macro is, in fact, defined to 0 by Alpha as well as SH. The Alpha
case is, however, trivially useless: none of the files that test
__ASSUME_ST_INO_64_BIT are built for Alpha (which gained kernel
support for stat64 syscalls, with a 64-bit st_ino field, in Linux
2.6.4; the define to 0 for Alpha in glibc predates that).
The SH kernel gained support for a 64-bit st_ino in struct stat64 in
commit 760bcb1deec13c50e20399c84cb6a8ea41cc2820 ("sh: Fix fstatat64()
syscall."), which is in Linux 2.6.22 and later. So the redefinition
of __ASSUME_ST_INO_64_BIT to 0 is of no use for SH either; three of
the files testing it do so immediately after a stat64-family syscall
has been used, which will always have set the 64-bit st_ino correctly
(in addition to the 32-bit __st_ino), while the relevant code
__xstat32_conv executes only after such a syscall in the function
calling __xstat32_conv.
Thus this patch removes __ASSUME_ST_INO_64_BIT and code testing it.
Removing the useless [!__ASSUME_ST_INO_64_BIT] code in __xstat32_conv
renders the [_HAVE_STAT64___ST_INO] and [!_HAVE_STAT64___ST_INO] cases
around it identical, so that conditional is also removed.
Tested compilation with build-many-glibcs.py for its Alpha and SH
configurations; also ran the glibc testsuite for x86_64 and x86.
* sysdeps/unix/sysv/linux/kernel-features.h
(__ASSUME_ST_INO_64_BIT): Remove macro definition.
* sysdeps/unix/sysv/linux/alpha/kernel-features.h
(__ASSUME_ST_INO_64_BIT): Do not undefine and define.
* sysdeps/unix/sysv/linux/sh/kernel-features.h
(__ASSUME_ST_INO_64_BIT): Likewise.
* sysdeps/unix/sysv/linux/fxstat64.c: Do not include
<kernel-features.h>.
(___fxstat64) [_HAVE_STAT64___ST_INO && !__ASSUME_ST_INO_64_BIT]:
Remove conditional code.
* sysdeps/unix/sysv/linux/lxstat64.c: Do not include
<kernel-features.h>.
(___lxstat64) [_HAVE_STAT64___ST_INO && !__ASSUME_ST_INO_64_BIT]:
Remove conditional code.
* sysdeps/unix/sysv/linux/xstat64.c: Do not include
<kernel-features.h>.
(___xstat64) [_HAVE_STAT64___ST_INO && !__ASSUME_ST_INO_64_BIT]:
Remove conditional code.
* sysdeps/unix/sysv/linux/xstatconv.c: Do not include
<kernel-features.h>.
(__xstat32_conv) [_HAVE_STAT64___ST_INO]: Remove conditional code.
[!_HAVE_STAT64___ST_INO]: Make code unconditional.
GCC mainline now gives errors for an asm that clobbers the stack
pointer. According to
<https://gcc.gnu.org/ml/gcc-patches/2018-12/msg00932.html> GCC
previously ignored such a clobber; thus, this patch removes it from
the clobbers for ia64 syscalls.
Tested with build-many-glibcs.py for ia64-linux-gnu.
* sysdeps/unix/sysv/linux/ia64/sysdep.h (ASM_CLOBBERS_6_COMMON):
Do not clobber r12.
Continuing the process of building up and using Python infrastructure
for extracting and using values in headers, this patch adds a test
that MAP_* constants from sys/mman.h agree with those in the Linux
kernel headers. (Other sys/mman.h constants could be added to the
test separately.)
This set of constants has grown over time, so the generic code is
enhanced to allow saying extra constants are OK on either side of the
comparison (where the caller sets those parameters based on the Linux
kernel headers version, compared with the version the headers were
last updated from). Although the test is a custom Python file, my
intention is to move in future to a single Python script for such
tests and text files it takes as inputs, once there are enough
examples to provide a guide to the common cases in such tests (I'd
like to end up with most or all such sets of constants copied from
kernel headers having such tests, and likewise for structure layouts
from the kernel).
The Makefile code is essentially the same as for tst-signal-numbers,
but I didn't try to find an object file to depend on to represent the
dependency on the headers used by the test (the conform/ tests don't
try to represent such header dependencies at all, for example).
Tested with build-many-glibcs.py, and also for x86_64 with older
kernel headers.
* scripts/glibcextract.py (compare_macro_consts): Take parameters
to allow extra macros from first or second sources.
* sysdeps/unix/sysv/linux/tst-mman-consts.py: New file.
* sysdeps/unix/sysv/linux/Makefile [$(subdir) = misc]
(tests-special): Add $(objpfx)tst-mman-consts.out.
($(objpfx)tst-mman-consts.out): New makefile target.
Linux kernel have remove stat64 family from default syscall set, new
implementations with statx is needed when __ARCH_WANT_STAT64 is not
define. This patch add conditionals for relevant functions, using statx
system call to get information and then copy to the return buf, ref to
include/linux/fs.h from linux kernel.
* sysdeps/unix/sysv/linux/Makefile: Add statx_cp.c.
* sysdeps/unix/sysv/linux/fxstat64.c: Add conditionals for kernel
without stat64 system call support.
* sysdeps/unix/sysv/linux/fxstatat64.c: Likewise.
* sysdeps/unix/sysv/linux/generic/wordsize-32/fxstat.c: Likewise.
* sysdeps/unix/sysv/linux/generic/wordsize-32/fxstatat.c: Likewise.
* sysdeps/unix/sysv/linux/generic/wordsize-32/lxstat.c: Likewise.
* sysdeps/unix/sysv/linux/generic/wordsize-32/lxstat64.c: Likewise.
* sysdeps/unix/sysv/linux/generic/wordsize-32/xstat.c: Likewise.
* sysdeps/unix/sysv/linux/generic/wordsize-32/xstat64.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/statx_cp.c: New file.
* sysdeps/unix/sysv/linux/statx_cp.c: Likewise.
* sysdeps/unix/sysv/linux/statx_cp.h: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/statx_cp.c: Likewise.
This patch converts the tst-signal-numbers test from shell + awk to
Python.
As with gen-as-const, the point is not so much that shell and awk are
problematic for this code, as that it's useful to build up general
infrastructure in Python for use of a range of code involving
extracting values from C headers. This patch moves some code from
gen-as-const.py to a new glibcextract.py, which also gains functions
relating to listing macros, and comparing the values of a set of
macros from compiling two different pieces of code.
It's not just signal numbers that should have such tests; pretty much
any case where glibc copies constants from Linux kernel headers should
have such tests that the values and sets of constants agree except
where differences are known to be OK. Much the same also applies to
structure layouts (although testing those without hardcoding lists of
fields to test will be more complicated).
Given this patch, another test for a set of macros would essentially
be just a call to glibcextract.compare_macro_consts (plus boilerplate
code - and we could move to having separate text files defining such
tests, like the .sym inputs to gen-as-const, so that only a single
Python script is needed for most such tests). Some such tests would
of course need new features, e.g. where the set of macros changes in
new kernel versions (so you need to allow new macro names on the
kernel side if the kernel headers are newer than the version known to
glibc, and extra macros on the glibc side if the kernel headers are
older). tst-syscall-list.sh could become a Python script that uses
common code to generate lists of macros but does other things with its
own custom logic.
There are a few differences from the existing shell + awk test.
Because the new test evaluates constants using the compiler, no
special handling is needed any more for one signal name being defined
to another. Because asm/signal.h now needs to pass through the
compiler, not just the preprocessor, stddef.h is included as well
(given the asm/signal.h issue that it requires an externally provided
definition of size_t). The previous code defined __ASSEMBLER__ with
asm/signal.h; this is removed (__ASSEMBLY__, a different macro,
eliminates the requirement for stddef.h on some but not all
architectures).
Tested for x86_64, and with build-many-glibcs.py.
* scripts/glibcextract.py: New file.
* scripts/gen-as-const.py: Do not import os.path, re, subprocess
or tempfile. Import glibcexctract.
(compute_c_consts): Remove. Moved to glibcextract.py.
(gen_test): Update reference to compute_c_consts.
(main): Likewise.
* sysdeps/unix/sysv/linux/tst-signal-numbers.py: New file.
* sysdeps/unix/sysv/linux/tst-signal-numbers.sh: Remove.
* sysdeps/unix/sysv/linux/Makefile
($(objpfx)tst-signal-numbers.out): Use tst-signal-numbers.py.
Redirect stderr as well as stdout.
I have tested that this builds and the resulting program still work.
This was tested on gcc23.fsffrance.org, and for some reason the vdso
there seems unused even when using shared libraries.
[BZ #19767]
* sysdeps/unix/sysv/linux/mips/init-first.c: Remove #ifdef SHARED.
* sysdeps/unix/sysv/linux/mips/libc-vdso.h: Remove #ifdef SHARED.
* sysdeps/unix/sysv/linux/mips/mips32/sysdep.h: Define
ALWAYS_USE_VSYSCALL.
* sysdeps/unix/sysv/linux/mips/mips64/n32/sysdep.h: Define
ALWAYS_USE_VSYSCALL.
* sysdeps/unix/sysv/linux/mips/mips64/n64/sysdep.h: Define
ALWAYS_USE_VSYSCALL.
Along with posix_spawn_file_actions_addchdir,
posix_spawn_file_actions_addfchdir is the subject of a change proposal
for POSIX: <http://austingroupbugs.net/view.php?id=1208>
I have tested that this builds and the resulting program still work.
The kernel in gcc117 (which I ussed for testing) seems to be missing
https://patchwork.kernel.org/patch/10060431/, so the vdso is never used.
[BZ #19767]
* sysdeps/unix/sysv/linux/arm/init-first.c: Remove #ifdef SHARED.
* sysdeps/unix/sysv/linux/arm/libc-vdso.h: Remove #ifdef SHARED.
* sysdeps/unix/sysv/linux/arm/sysdep.h: Define
ALWAYS_USE_VSYSCALL.
This patch uses posix_spawn on system implementation. On Linux this has
the advantage of much lower memory consumption (usually 32 Kb minimum for
the mmap stack area).
Although POSIX does not require, glibc system implementation aims to be
thread and cancellation safe. The cancellation code is moved to generic
implementation and enabled iff SIGCANCEL is defined (similar on how the
cancellation handler is enabled on nptl-init.c).
Checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu,
arm-linux-gnueabihf, and powerpc64le-linux-gnu.
* sysdeps/unix/sysv/linux/spawni.c (__spawni_child): Use
__sigismember instead of sigismember.
* sysdeps/posix/system.c [SIGCANCEL] (cancel_handler_args,
cancel_handler): New definitions.
(CLEANUP_HANDLER, CLEANUP_RESET): Likewise.
(DO_LOCK, DO_UNLOCK, INIT_LOCK, ADD_REF, SUB_REF): Remove.
(do_system): Use posix_spawn instead of fork and execl and remove
reentracy code.
* sysdeps/generic/not-errno.h (__kill_noerrno): New prototype.
* sysdeps/unix/sysv/linux/not-errno.h (__kill_noerrno): Likewise.
* sysdeps/unix/sysv/linux/ia64/system.c: Remove file.
* sysdeps/unix/sysv/linux/s390/system.c: Likewise.
* sysdeps/unix/sysv/linux/sparc/system.c: Likewise.
* sysdeps/unix/sysv/linux/system.c: Likewise.
All the required code already existed, and some of it was already
running.
AT_SYSINFO_EHDR is processed if NEED_DL_SYSINFO_DSO is defined, but it
looks like it always is. The call to setup_vdso is also unconditional,
so all that was left to do was setup the function pointers and use
them. This patch just deletes some #ifdef to enable that.
[BZ #19767]
* nptl/Makefile (tests-static): Add tst-cond11-static.
(tests): Likewise.
* nptl/tst-cond11-static.c: New File.
* sysdeps/unix/sysv/linux/Makefile (tests-static): Add
tst-affinity-static.
(tests): Likewise.
* sysdeps/unix/sysv/linux/sysdep-vdso.h: Check USE_VSYSCALL
instead of SHARED.
* sysdeps/unix/sysv/linux/sysdep.h (ALWAYS_USE_VSYSCALL): New.
(USE_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/tst-affinity-static.c: New file.
* sysdeps/unix/sysv/linux/x86/libc-vdso.h: Check USE_VSYSCALL
instead of SHARED.
* sysdeps/unix/sysv/linux/x86_64/init-first.c: Don't check
SHARED.
* sysdeps/unix/sysv/linux/x86_64/sysdep.h (ALWAYS_USE_VSYSCALL):
New.
The generic kernel-features.h defines __ASSUME_COPY_FILE_RANGE for 4.5
and later kernels. However, for 32-bit Arm binaries running on 64-bit
Arm kernels, the syscall was only wired up in the 4.7 kernel, although
the 32-bit Arm kernel had the syscall from 4.5 onwards. This patch
corrects the Arm kernel-features.h to undefine the macro for
configured minimum kernel versions before 4.7.
Tested (compilation only) with a build-many-glibcs.py build for
arm-linux-gnueabi.
[BZ #23915]
* sysdeps/unix/sysv/linux/arm/kernel-features.h
[__LINUX_KERNEL_VERSION < 0x040700] (__ASSUME_COPY_FILE_RANGE):
Undefine.
Introduce new pow symbol version that doesn't do SVID compatible error
handling. The standard errno and fp exception based error handling is
inline in the new code and does not have significant overhead.
The wrapper is disabled for sysdeps/ieee754/dbl-64 by using empty
w_pow.c and enabled for targets with their own pow implementation or
ifunc dispatch on __ieee754_pow by including math/w_pow.c.
The compatibility symbol version still uses the wrapper with SVID error
handling around the new code. There is no new symbol version nor
compatibility code on !LIBM_SVID_COMPAT targets (e.g. riscv).
On targets where previously powl was an alias of pow, now it points to
the compatibility symbol with the wrapper, because it still need the
SVID compatible error handling. This affects NO_LONG_DOUBLE (e.g. arm)
and LONG_DOUBLE_COMPAT (e.g. alpha) targets as well.
The __pow_finite symbol is now an alias of pow. Both __pow_finite and
pow set errno and thus not const functions.
The ia64 asm is changed so the compat and new symbol versions map to the
same address.
On x86_64 #include <math.h> was added before macro definitions that
may affect that header.
Tested with build-many-glibcs.py.
* math/Versions (GLIBC_2.29): Add pow.
* math/w_pow_compat.c (__pow_compat): Change to versioned compat
symbol.
* math/w_pow.c: New file.
* sysdeps/i386/fpu/w_pow.c: New file.
* sysdeps/ia64/fpu/e_pow.S: Add versioned symbols.
* sysdeps/ieee754/dbl-64/e_pow.c (__ieee754_pow): Rename to __pow
and add necessary aliases.
* sysdeps/ieee754/dbl-64/w_pow.c: New file.
* sysdeps/m68k/m680x0/fpu/w_pow.c: New file.
* sysdeps/mach/hurd/i386/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Update.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Update.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Update.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Update.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Update.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Update.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Update.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Update.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Update.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Update.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Update.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Update.
* sysdeps/x86_64/fpu/multiarch/e_pow-fma.c (__ieee754_pow): Rename to
__pow.
* sysdeps/x86_64/fpu/multiarch/e_pow-fma4.c (__ieee754_pow): Likewise.
* sysdeps/x86_64/fpu/multiarch/e_pow.c (__ieee754_pow): Likewise.
* sysdeps/x86_64/fpu/multiarch/w_pow.c: New file.
Introduce new log2 symbol version that doesn't do SVID compatible error
handling. The standard errno and fp exception based error handling is
inline in the new code and does not have significant overhead.
The wrapper is disabled for sysdeps/ieee754/dbl-64 by using empty
w_log2.c and enabled for targets with their own log2 implementation by
including math/w_log2.c.
The compatibility symbol version still uses the wrapper with SVID error
handling around the new code. There is no new symbol version nor
compatibility code on !LIBM_SVID_COMPAT targets (e.g. riscv).
On targets where previously log2l was an alias of log2, now it points to
the compatibility symbol with the wrapper, because it still need the
SVID compatible error handling. This affects NO_LONG_DOUBLE (e.g. arm)
and LONG_DOUBLE_COMPAT (e.g. alpha) targets as well.
The __log2_finite symbol is now an alias of log2. Both __log2_finite
and log2 set errno and thus not const functions.
The ia64 asm is changed so the compat and new symbol versions map to the
same address.
Tested with build-many-glibcs.py.
* math/Versions (GLIBC_2.29): Add log2.
* math/w_log2_compat.c (__log2_compat): Change to versioned compat
symbol.
* math/w_log2.c: New file.
* sysdeps/i386/fpu/w_log2.c: New file.
* sysdeps/ia64/fpu/e_log2.S: Add versioned symbols.
* sysdeps/ieee754/dbl-64/e_log2.c (__ieee754_log2): Rename to __log2
and add necessary aliases.
* sysdeps/ieee754/dbl-64/w_log2.c: New file.
* sysdeps/m68k/m680x0/fpu/w_log2.c: New file.
* sysdeps/mach/hurd/i386/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Update.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Update.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Update.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Update.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Update.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Update.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Update.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Update.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Update.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Update.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Update.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Update.
Introduce new log symbol version that doesn't do SVID compatible error
handling. The standard errno and fp exception based error handling is
inline in the new code and does not have significant overhead.
The wrapper is disabled for sysdeps/ieee754/dbl-64 by using empty
w_log.c and enabled for targets with their own log implementation by
including math/w_log.c.
The compatibility symbol version still uses the wrapper with SVID error
handling around the new code. There is no new symbol version nor
compatibility code on !LIBM_SVID_COMPAT targets (e.g. riscv).
On targets where previously logl was an alias of log, now it points to
the compatibility symbol with the wrapper, because it still need the
SVID compatible error handling. This affects NO_LONG_DOUBLE (e.g. arm)
and LONG_DOUBLE_COMPAT (e.g. alpha) targets as well.
The __log_finite symbol is now an alias of log. Both __log_finite and
log set errno and thus not const functions.
The ia64 asm is changed so the compat and new symbol versions map to the
same address.
On x86_64 #include <math.h> was added before macro definitions that may
affect that header.
Tested with build-many-glibcs.py.
* math/Versions (GLIBC_2.29): Add log.
* math/w_log_compat.c (__log_compat): Change to versioned compat
symbol.
* math/w_log.c: New file.
* sysdeps/i386/fpu/w_log.c: New file.
* sysdeps/ia64/fpu/e_log.S: Update.
* sysdeps/ieee754/dbl-64/e_log.c (__ieee754_log): Rename to __log
and add necessary aliases.
* sysdeps/ieee754/dbl-64/w_log.c: New file.
* sysdeps/m68k/m680x0/fpu/w_log.c: New file.
* sysdeps/mach/hurd/i386/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Update.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Update.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Update.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Update.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Update.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Update.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Update.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Update.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Update.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Update.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Update.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Update.
* sysdeps/x86_64/fpu/multiarch/e_log-avx.c (__ieee754_log): Rename to
__log.
* sysdeps/x86_64/fpu/multiarch/e_log-fma.c (__ieee754_log): Likewise.
* sysdeps/x86_64/fpu/multiarch/e_log-fma4.c (__ieee754_log): Likewise.
* sysdeps/x86_64/fpu/multiarch/e_log.c (__ieee754_log): Likewise.
* sysdeps/x86_64/fpu/multiarch/w_log.c: New file.
Introduce new exp and exp2 symbol version that don't do SVID compatible
error handling. The standard errno and fp exception based error handling
is inline in the new code and does not have significant overhead.
The double precision wrappers are disabled for sysdeps/ieee754/dbl-64
by using empty w_exp.c and w_exp2.c files, the math/w_exp.c and
math/w_exp2.c files use the wrapper template and can be included by
targets that have their own exp and exp2 implementations or use ifunc
on the glibc internal __ieee754_exp symbol.
The compatibility symbol versions still use the wrapper with SVID error
handling around the new code. There is no new symbol version nor
compatibility code on !LIBM_SVID_COMPAT targets (e.g. riscv).
On targets where previously expl and exp2l were aliases of exp and exp2,
now they point to the compatibility symbols with the wrapper, because
they still need the SVID compatible error handling. This affects
NO_LONG_DOUBLE (e.g arm) and LONG_DOUBLE_COMPAT (e.g. alpha) targets
as well.
The _finite symbols are now aliases of the standard symbols (they have
no performance advantage anymore). Both the standard symbols and
_finite symbols set errno and thus not const functions.
The ia64 asm is changed so the compat and new symbol versions map to the
same address.
On x86_64 #include <math.h> was added before macro definitions that may
affect that header (the new macro name is __exp instead of __ieee754_exp
which breaks some math.h macros).
Tested with build-many-glibcs.py.
* math/Versions (GLIBC_2.29): Add exp and exp2.
* math/w_exp2_compat.c (__exp2_compat): Change to versioned compat
symbol, handle NO_LONG_DOUBLE and LONG_DOUBLE_COMPAT explicitly.
* math/w_exp_compat.c (__exp_compat): Likewise.
* math/w_exp.c: New file.
* math/w_exp2.c: New file.
* sysdeps/i386/fpu/w_exp.c: New file.
* sysdeps/i386/fpu/w_exp2.c: New file.
* sysdeps/ia64/fpu/e_exp.S: Add versioned symbols.
* sysdeps/ia64/fpu/e_exp2.S: Likewise.
* sysdeps/ieee754/dbl-64/e_exp.c (__ieee754_exp): Rename to __exp
and add necessary aliases.
* sysdeps/ieee754/dbl-64/e_exp2.c (__ieee754_exp2): Rename to __exp2
and add necessary aliases.
* sysdeps/ieee754/dbl-64/w_exp.c: New file.
* sysdeps/ieee754/dbl-64/w_exp2.c: New file.
* sysdeps/m68k/m680x0/fpu/w_exp.c: New file.
* sysdeps/m68k/m680x0/fpu/w_exp2.c: New file.
* sysdeps/mach/hurd/i386/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Update.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Update.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Update.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Update.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Update.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Update.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Update.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Update.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Update.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Update.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Update.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Update.
* sysdeps/x86_64/fpu/multiarch/e_exp-avx.c (__exp1): Remove.
(__ieee754_exp): Rename to __exp.
* sysdeps/x86_64/fpu/multiarch/e_exp-fma.c (__exp1): Remove.
(__ieee754_exp): Rename to __exp.
* sysdeps/x86_64/fpu/multiarch/e_exp-fma4.c (__exp1): Remove.
(__ieee754_exp): Rename to __exp.
* sysdeps/x86_64/fpu/multiarch/e_exp.c (__ieee754_exp): Rename to
__exp.
* sysdeps/x86_64/fpu/multiarch/w_exp.c: New file.
The __ASSUME_SOCKETCALL macro in kernel-features.h is no longer used
for anything. (It used to be used in defining other macros related to
accept4 / recvmmsg / sendmmsg availability, but the code in that area
was simplified once we could assume a kernel with those features,
whether through a syscall or through socketcall, so allowing those
functions to be handled much like other socket operations, without
requring __ASSUME_SOCKETCALL.) This patch removes that unused macro.
(Note: once we can assume a Linux 4.4 or later kernel, much of the
support for using socketcall at all can be removed from glibc,
although a few functions may need that support in glibc for longer.)
Tested with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/kernel-features.h: Remove comment about
__ASSUME_SOCKETCALL.
* sysdeps/unix/sysv/linux/i386/kernel-features.h
(__ASSUME_SOCKETCALL): Remove.
* sysdeps/unix/sysv/linux/m68k/kernel-features.h
(__ASSUME_SOCKETCALL): Likewise.
* sysdeps/unix/sysv/linux/microblaze/kernel-features.h
(__ASSUME_SOCKETCALL): Likewise.
* sysdeps/unix/sysv/linux/powerpc/kernel-features.h
(__ASSUME_SOCKETCALL): Likewise.
* sysdeps/unix/sysv/linux/s390/kernel-features.h
(__ASSUME_SOCKETCALL): Likewise.
* sysdeps/unix/sysv/linux/sh/kernel-features.h
(__ASSUME_SOCKETCALL): Likewise.
* sysdeps/unix/sysv/linux/sparc/kernel-features.h
(__ASSUME_SOCKETCALL): Likewise.
The generic kernel-features.h defines __ASSUME_MLOCK2 for 4.4 and
later kernels. However, for 32-bit ARM binaries running on 64-bit ARM
kernels, and for MicroBlaze, the syscall was only wired up in the 4.7
kernel. (32-bit ARM kernels did have the syscall from 4.4 onwards.)
This patch duly arranges for the macro to be undefined for those
architectures for kernels before 4.7.
Tested with build-many-glibcs.py for its ARM and MicroBlaze
configurations.
[BZ #23867]
* sysdeps/unix/sysv/linux/arm/kernel-features.h
[__LINUX_KERNEL_VERSION < 0x040700] (__ASSUME_MLOCK2): Undefine.
* sysdeps/unix/sysv/linux/microblaze/kernel-features.h
[__LINUX_KERNEL_VERSION < 0x040700] (__ASSUME_MLOCK2): Undefine.
The SH kernel-features.h undefines __ASSUME_RENAMEAT2 for kernel
versions before 4.8, but fails to undefine __ASSUME_EXECVEAT,
__ASSUME_MLOCK2 and __ASSUME_COPY_FILE_RANGE, although all those
syscalls (and several others) were added for SH in the same Linux
kernel commit (first released in 4.8). This patch adds the proper
undefines of those macros.
Tested with build-many-glibcs.py for its SH configurations.
[BZ #23862]
* sysdeps/unix/sysv/linux/sh/kernel-features.h
[__LINUX_KERNEL_VERSION < 0x040800] (__ASSUME_EXECVEAT): Undefine.
[__LINUX_KERNEL_VERSION < 0x040800] (__ASSUME_MLOCK2): Likewise.
[__LINUX_KERNEL_VERSION < 0x040800] (__ASSUME_COPY_FILE_RANGE):
Likewise.
Looking at kernel-features.h files, I saw that SPARC was missing full
information on when it gained separate socket syscalls.
This patch adds such information to the SPARC kernel-features.h. It
also corrects what appear to be bugs in the existing code (that would
cause syscalls to be assumed to be present when not actually present).
Various __ASSUME_* macros, defined by default, were not undefined for
32-bit despite those syscalls only being added for 32-bit in Linux
4.4. Some syscalls were used in the SPARC64 syscalls.list but only
added in 4.4; this was harmless before the __NR_* macros were defined
at all, but once the macros were defined it means a build with
post-4.4 headers would assume the syscalls to be present regardless of
--enable-kernel version. Then, various __ASSUME_* macros were
previously not defined in cases where they could be defined (this part
of the patch is just an optimization, not a bug fix).
Note the observation in a comment in the patch that even the latest
Linux kernel for SPARC does not have getpeername and getsockname
syscalls in the compat syscall table for 32-bit binaries on 64-bit
kernels (so glibc can't assume those syscalls to be present for 32-bit
at all, although the 32-bit syscall table gained them in 4.4).
Tested (compilation only) for SPARC with build-many-glibcs.py.
[BZ #23848]
* sysdeps/unix/sysv/linux/sparc/kernel-features.h [!__arch64__ &&
__LINUX_KERNEL_VERSION < 0x040400] (__ASSUME_SENDMSG_SYSCALL):
Undefine.
[!__arch64__ && __LINUX_KERNEL_VERSION < 0x040400]
(__ASSUME_RECVMSG_SYSCALL): Likewise.
[!__arch64__ && __LINUX_KERNEL_VERSION < 0x040400]
(__ASSUME_SENDTO_SYSCALL): Likewise.
[!__arch64__ && __LINUX_KERNEL_VERSION < 0x040400]
(__ASSUME_ACCEPT_SYSCALL): Undefine under this condition, not just
[!__arch64__].
[!__arch64__ && __LINUX_KERNEL_VERSION < 0x040400]
(__ASSUME_CONNECT_SYSCALL): Likewise.
[!__arch64__ && __LINUX_KERNEL_VERSION < 0x040400]
(__ASSUME_RECVFROM_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040400] (__ASSUME_BIND_SYSCALL):
Define.
[__LINUX_KERNEL_VERSION >= 0x040400] (__ASSUME_LISTEN_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040400]
(__ASSUME_SETSOCKOPT_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/syscalls.list (bind):
Remove.
(listen): Likewise.
(setsockopt): Likewise.
The #else of two nested #if clauses were identical.
* sysdeps/unix/sysv/linux/sysdep-vdso.h: Simplify an #if #else
#endif.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
This patch adds the IN_MASK_CREATE macro from Linux 4.19 to
sys/inotify.h.
Tested for x86_64.
* sysdeps/unix/sysv/linux/sys/inotify.h (IN_MASK_CREATE): New
macro.
