mirror of
https://sourceware.org/git/glibc.git
synced 2024-12-27 13:10:29 +00:00
ca3aac57ef
289 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Wilco Dijkstra
|
ca3aac57ef |
Remove unused math files
Remove empty files due to the sin/cos improvements: k_sinf.c, k_cosf.c, k_cos.c, k_sin.c. After the tanf change s_rem_pio2f.c and k_rem_pio2f.c (and the ia64, m68k and powerpc equivalents) are no longer used, so remove them. All e_rem_pio2.c files were already empty or commented out, so remove them too. Passes build-many-glibcs. * math/Makefile: Remove empty files k_sin(f).c, k_cos(f).c. Remove unused files e_rem_pio2(f).c, k_rem_pio2f.c. * sysdeps/i386/fpu/e_rem_pio2.c: Delete file. * sysdeps/ia64/fpu/e_rem_pio2.c: Likewise. * sysdeps/ia64/fpu/e_rem_pio2f.c: Likewise. * sysdeps/ia64/fpu/k_rem_pio2f.c: Likewise. * sysdeps/ieee754/dbl-64/e_rem_pio2.c: Likewise. * sysdeps/ieee754/dbl-64/k_cos.c: Likewise. * sysdeps/ieee754/dbl-64/k_sin.c: Likewise. * sysdeps/ieee754/flt-32/e_rem_pio2f.c: Likewise. * sysdeps/ieee754/flt-32/k_cosf.c: Likewise. * sysdeps/ieee754/flt-32/k_rem_pio2f.c: Likewise. * sysdeps/ieee754/flt-32/k_sinf.c: Likewise. * sysdeps/m68k/m680x0/fpu/e_rem_pio2.c: Likewise * sysdeps/m68k/m680x0/fpu/e_rem_pio2f.c: Likewise * sysdeps/m68k/m680x0/fpu/k_rem_pio2f.c: Likewise * sysdeps/powerpc/fpu/e_rem_pio2f.c: Likewise. * sysdeps/powerpc/fpu/k_rem_pio2f.c: Likewise. |
||
|
Wilco Dijkstra
|
ea5c662c62 |
Improve performance of sincosf
This patch is a complete rewrite of sincosf. The new version is significantly faster, as well as simple and accurate. The worst-case ULP is 0.5607, maximum relative error is 0.5303 * 2^-23 over all 4 billion inputs. In non-nearest rounding modes the error is 1ULP. The algorithm uses 3 main cases: small inputs which don't need argument reduction, small inputs which need a simple range reduction and large inputs requiring complex range reduction. The code uses approximate integer comparisons to quickly decide between these cases. The small range reducer uses a single reduction step to handle values up to 120.0. It is fastest on targets which support inlined round instructions. The large range reducer uses integer arithmetic for simplicity. It does a 32x96 bit multiply to compute a 64-bit modulo result. This is more than accurate enough to handle the worst-case cancellation for values close to an integer multiple of PI/4. It could be further optimized, however it is already much faster than necessary. sincosf throughput gains on Cortex-A72: * |x| < 0x1p-12 : 1.6x * |x| < M_PI_4 : 1.7x * |x| < 2 * M_PI: 1.5x * |x| < 120.0 : 1.8x * |x| < Inf : 2.3x * math/Makefile: Add s_sincosf_data.c. * sysdeps/ia64/fpu/s_sincosf_data.c: New file. * sysdeps/ieee754/flt-32/s_sincosf.h (abstop12): Add new function. (sincosf_poly): Likewise. (reduce_small): Likewise. (reduce_large): Likewise. * sysdeps/ieee754/flt-32/s_sincosf.c (sincosf): Rewrite. * sysdeps/ieee754/flt-32/s_sincosf_data.c: New file with sincosf data. * sysdeps/m68k/m680x0/fpu/s_sincosf_data.c: New file. * sysdeps/x86_64/fpu/s_sincosf_data.c: New file. |
||
Joseph Myers
|
2813e41e90 |
Replace gen-libm-test.pl with gen-libm-test.py.
Following the recent discussion of using Python instead of Perl and Awk for glibc build / test, this patch replaces gen-libm-test.pl with a new gen-libm-test.py script. This script should work with all Python versions supported by glibc (tested by hand with Python 2.7, tested in the build system with Python 3.5; configure prefers Python 3 if available). This script is designed to give identical output to gen-libm-test.pl for ease of verification of the change, except for generated comments referring to .py instead of .pl. (That is, identical for actual inputs passed to the script, not necessarily for all possible input; for example, this version more precisely follows the C standard syntax for floating-point constants when deciding when to add LIT macro calls.) In one place a comment notes that the generation of NON_FINITE flags is replicating a bug in the Perl script to assist in such comparisons (with the expectation that this bug can then be separately fixed in the Python script later). Tested for x86_64, including comparison of generated files (and hand testing of the case of generating a sorted libm-test-ulps file, which isn't covered by normal "make check"). I'd expect to follow this up by extending the new script to produce the ulps tables for the manual as well (replacing manual/libm-err-tab.pl, so that then we just have one ulps file parser) - at which point the manual build would depend on both Perl and Python (eliminating the Perl dependency would require someone to rewrite summary.pl in Python, and that would only eliminate the *direct* Perl dependency; current makeinfo is written in Perl so there would still be an indirect dependency). I think install.texi is more or less equally out-of-date regarding Perl and Python uses before and after this patch, so I don't think this patch depends on my patch <https://sourceware.org/ml/libc-alpha/2018-08/msg00133.html> to update install.texi regarding such uses (pending review). * math/gen-libm-test.py: New file. * math/gen-libm-test.pl: Remove. * math/Makefile [$(PERL) != no]: Change condition to [PYTHON]. ($(objpfx)libm-test-ulps.h): Use gen-libm-test.py instead of gen-libm-test.pl. ($(libm-test-c-noauto-obj)): Likewise. ($(libm-test-c-auto-obj)): Likewise. ($(libm-test-c-narrow-obj)): Likewise. (regen-ulps): Likewise. * math/README.libm-test: Update references to gen-libm-test.pl. * math/libm-test-driver.c (struct test_fj_f_data): Update comment referencing gen-libm-test.pl. * math/libm-test-nexttoward.inc (nexttoward_test_data): Likewise. * math/libm-test-support.c: Likewise. * math/libm-test-support.h: Likewise. * sysdeps/generic/libm-test-ulps: Likewise. |
||
Tulio Magno Quites Machado Filho
|
5e79e0292b |
Add a generic significand implementation
Create a template for significand. * math/Makefile (libm-calls): Move s_significandF to... (gen-libm-calls): ... here. * math/s_significand_template.c: New file. * math/s_significand.c: Removed. * math/s_significandf.c: Removed. * math/s_significandl.c: Removed. * sysdeps/ieee754/ldbl-opt/s_significand.c: Removed. * sysdeps/ieee754/ldbl-opt/s_significandl.c: Removed. Signed-off-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com> |
||
|
Joseph Myers
|
48b12ed54c |
Do not use const attribute for nan functions (bug 23277).
As in https://gcc.gnu.org/bugzilla/show_bug.cgi?id=86113 for __builtin_nan, bits/mathcalls.h wrongly declares the nan function with the __const__ attribute. Because the function reads memory pointed to by an argument, it's only pure, not const. This patch removes the incorrect attribute and adds a testcase for the bug. No __pure__ attribute is added to replace the incorrect __const__ one, since that would introduce problems when using GCC versions that have the incorrect built-in __const__ attribute and warn for the combination of those two attributes. Tested for x86_64. [BZ #23277] * math/bits/mathcalls.h [__USE_ISOC99] (nan): Do not use __const__ attribute. * math/test-nan-const.c: New file. * math/Makefile (tests): Add test-nan-const. (CFLAGS-test-nan-const.c): New variable. |
||
|
Joseph Myers
|
7c67e6e8b9 |
Split test-tgmath3 by function.
It has been noted that test-tgmath3 is slow to compile, and to link on some systems <https://sourceware.org/ml/libc-alpha/2018-02/msg00477.html>, because of the size of the test. I'm working on tgmath.h support for the TS 18661-1 / 18661-3 functions that round their results to a narrower type. For the functions already present in glibc, this wouldn't make test-tgmath3 much bigger, because those functions only have two arguments. For the narrowing versions of fma (for which I've not yet added the functions to glibc), however, it would result in many configurations building tests of the type-generic macros f32fma, f64fma, f32xfma, f64xfma, each with 21 possible types for each of three arguments (float, double, long double aren't valid argument types for these macros when they return a _FloatN / _FloatNx type), so substantially increasing the size of the testcase. To avoid further increasing the size of a single test when adding the type-generic narrowing fma macros, this patch arranges for the test-tgmath3 tests to be run separately for each function tested. The fma tests are still by far the largest (next is pow, as that has two arguments that can be real or complex; after that, the two-argument real-only functions), but each type-generic fma macro for a different return type would end up with its tests being run separately, rather than increasing the size of a single test. To avoid accidentally missing testing a macro because gen-tgmath-tests.py supports testing it but the makefile fails to call it for that function, a test is also added that verifies that the lists of macros in the makefile and gen-tgmath-tests.py agree. Tested for x86_64. * math/gen-tgmath-tests.py: Import sys. (Tests.__init__): Initialize macros_seen. (Tests.add_tests): Add macro to macros_seen. Only generate tests if requested to do so for this macro. (Tests.add_all_tests): Take argument for macro for which to generate tests. (Tests.check_macro_list): New function. (main): Handle check-list argument and argument specifying macro for which to generate tests. * math/Makefile [PYTHON] (tgmath3-macros): New variable. [PYTHON] (tgmath3-macro-tests): Likewise. [PYTHON] (tests): Add $(tgmath3-macro-tests) not test-tgmath3. [PYTHON] (generated): Add $(addsuffix .c,$(tgmath3-macro-tests)) not test-tgmath3.c. [PYTHON] (CFLAGS-test-tgmath3.c): Remove. [PYTHON] ($(tgmath3-macro-tests:%=$(objpfx)%.o): Add -fno-builtin to CFLAGS. [PYTHON] ($(objpfx)test-tgmath3.c): Replace rule by.... [PYTHON] ($(foreach m,$(tgmath3-macros),$(objpfx)test-tgmath3-$(m).c): ... this. New rule. [PYTHON] (tests-special): Add $(objpfx)test-tgmath3-macro-list.out. [PYTHON] ($(objpfx)test-tgmath3-macro-list.out): New rule. |
||
|
Joseph Myers
|
632a6cbe44 |
Add narrowing divide functions.
This patch adds the narrowing divide functions from TS 18661-1 to glibc's libm: fdiv, fdivl, ddivl, f32divf64, f32divf32x, f32xdivf64 for all configurations; f32divf64x, f32divf128, f64divf64x, f64divf128, f32xdivf64x, f32xdivf128, f64xdivf128 for configurations with _Float64x and _Float128; __nldbl_ddivl for ldbl-opt. The changes are mostly essentially the same as for the other narrowing functions, so the description of those generally applies to this patch as well. Tested for x86_64, x86, mips64 (all three ABIs, both hard and soft float) and powerpc, and with build-many-glibcs.py. * math/Makefile (libm-narrow-fns): Add div. (libm-test-funcs-narrow): Likewise. * math/Versions (GLIBC_2.28): Add narrowing divide functions. * math/bits/mathcalls-narrow.h (div): Use __MATHCALL_NARROW. * math/gen-auto-libm-tests.c (test_functions): Add div. * math/math-narrow.h (CHECK_NARROW_DIV): New macro. (NARROW_DIV_ROUND_TO_ODD): Likewise. (NARROW_DIV_TRIVIAL): Likewise. * sysdeps/ieee754/float128/float128_private.h (__fdivl): New macro. (__ddivl): Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fdiv and ddiv. (CFLAGS-nldbl-ddiv.c): New variable. (CFLAGS-nldbl-fdiv.c): Likewise. * sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add __nldbl_ddivl. * sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_ddivl): New prototype. * manual/arith.texi (Misc FP Arithmetic): Document fdiv, fdivl, ddivl, fMdivfN, fMdivfNx, fMxdivfN and fMxdivfNx. * math/auto-libm-test-in: Add tests of div. * math/auto-libm-test-out-narrow-div: New generated file. * math/libm-test-narrow-div.inc: New file. * sysdeps/i386/fpu/s_f32xdivf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_f32xdivf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_fdiv.c: Likewise. * sysdeps/ieee754/float128/s_f32divf128.c: Likewise. * sysdeps/ieee754/float128/s_f64divf128.c: Likewise. * sysdeps/ieee754/float128/s_f64xdivf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_ddivl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_f64xdivf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_fdivl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_ddivl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fdivl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_ddivl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_fdivl.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-ddiv.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-fdiv.c: Likewise. * sysdeps/ieee754/soft-fp/s_ddivl.c: Likewise. * sysdeps/ieee754/soft-fp/s_fdiv.c: Likewise. * sysdeps/ieee754/soft-fp/s_fdivl.c: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps: Update. * sysdeps/mach/hurd/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
||
|
Joseph Myers
|
69a01461ee |
Add narrowing multiply functions.
This patch adds the narrowing multiply functions from TS 18661-1 to glibc's libm: fmul, fmull, dmull, f32mulf64, f32mulf32x, f32xmulf64 for all configurations; f32mulf64x, f32mulf128, f64mulf64x, f64mulf128, f32xmulf64x, f32xmulf128, f64xmulf128 for configurations with _Float64x and _Float128; __nldbl_dmull for ldbl-opt. The changes are mostly essentially the same as for the narrowing add functions, so the description of those generally applies to this patch as well. f32xmulf64 for i386 cannot use precision control as used for add and subtract, because that would result in double rounding for subnormal results, so that uses round-to-odd with long double intermediate result instead. The soft-fp support involves adding a new FP_TRUNC_COOKED since soft-fp multiplication uses cooked inputs and outputs. Tested for x86_64, x86, mips64 (all three ABIs, both hard and soft float) and powerpc, and with build-many-glibcs.py. * math/Makefile (libm-narrow-fns): Add mul. (libm-test-funcs-narrow): Likewise. * math/Versions (GLIBC_2.28): Add narrowing multiply functions. * math/bits/mathcalls-narrow.h (mul): Use __MATHCALL_NARROW. * math/gen-auto-libm-tests.c (test_functions): Add mul. * math/math-narrow.h (CHECK_NARROW_MUL): New macro. (NARROW_MUL_ROUND_TO_ODD): Likewise. (NARROW_MUL_TRIVIAL): Likewise. * soft-fp/op-common.h (FP_TRUNC_COOKED): Likewise. * sysdeps/ieee754/float128/float128_private.h (__fmull): New macro. (__dmull): Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fmul and dmul. (CFLAGS-nldbl-dmul.c): New variable. (CFLAGS-nldbl-fmul.c): Likewise. * sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add __nldbl_dmull. * sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_dmull): New prototype. * manual/arith.texi (Misc FP Arithmetic): Document fmul, fmull, dmull, fMmulfN, fMmulfNx, fMxmulfN and fMxmulfNx. * math/auto-libm-test-in: Add tests of mul. * math/auto-libm-test-out-narrow-mul: New generated file. * math/libm-test-narrow-mul.inc: New file. * sysdeps/i386/fpu/s_f32xmulf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_f32xmulf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_fmul.c: Likewise. * sysdeps/ieee754/float128/s_f32mulf128.c: Likewise. * sysdeps/ieee754/float128/s_f64mulf128.c: Likewise. * sysdeps/ieee754/float128/s_f64xmulf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_dmull.c: Likewise. * sysdeps/ieee754/ldbl-128/s_f64xmulf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_fmull.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_dmull.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fmull.c: Likewise. * sysdeps/ieee754/ldbl-96/s_dmull.c: Likewise. * sysdeps/ieee754/ldbl-96/s_fmull.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-dmul.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-fmul.c: Likewise. * sysdeps/ieee754/soft-fp/s_dmull.c: Likewise. * sysdeps/ieee754/soft-fp/s_fmul.c: Likewise. * sysdeps/ieee754/soft-fp/s_fmull.c: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps: Update. * sysdeps/mach/hurd/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
||
|
Joseph Myers
|
8d3f9e85cf |
Add narrowing subtract functions.
This patch adds the narrowing subtract functions from TS 18661-1 to glibc's libm: fsub, fsubl, dsubl, f32subf64, f32subf32x, f32xsubf64 for all configurations; f32subf64x, f32subf128, f64subf64x, f64subf128, f32xsubf64x, f32xsubf128, f64xsubf128 for configurations with _Float64x and _Float128; __nldbl_dsubl for ldbl-opt. The changes are essentially the same as for the narrowing add functions, so the description of those generally applies to this patch as well. Tested for x86_64, x86, mips64 (all three ABIs, both hard and soft float) and powerpc, and with build-many-glibcs.py. * math/Makefile (libm-narrow-fns): Add sub. (libm-test-funcs-narrow): Likewise. * math/Versions (GLIBC_2.28): Add narrowing subtract functions. * math/bits/mathcalls-narrow.h (sub): Use __MATHCALL_NARROW. * math/gen-auto-libm-tests.c (test_functions): Add sub. * math/math-narrow.h (CHECK_NARROW_SUB): New macro. (NARROW_SUB_ROUND_TO_ODD): Likewise. (NARROW_SUB_TRIVIAL): Likewise. * sysdeps/ieee754/float128/float128_private.h (__fsubl): New macro. (__dsubl): Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fsub and dsub. (CFLAGS-nldbl-dsub.c): New variable. (CFLAGS-nldbl-fsub.c): Likewise. * sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add __nldbl_dsubl. * sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_dsubl): New prototype. * manual/arith.texi (Misc FP Arithmetic): Document fsub, fsubl, dsubl, fMsubfN, fMsubfNx, fMxsubfN and fMxsubfNx. * math/auto-libm-test-in: Add tests of sub. * math/auto-libm-test-out-narrow-sub: New generated file. * math/libm-test-narrow-sub.inc: New file. * sysdeps/i386/fpu/s_f32xsubf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_f32xsubf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_fsub.c: Likewise. * sysdeps/ieee754/float128/s_f32subf128.c: Likewise. * sysdeps/ieee754/float128/s_f64subf128.c: Likewise. * sysdeps/ieee754/float128/s_f64xsubf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_dsubl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_f64xsubf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_fsubl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_dsubl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fsubl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_dsubl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_fsubl.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-dsub.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-fsub.c: Likewise. * sysdeps/ieee754/soft-fp/s_dsubl.c: Likewise. * sysdeps/ieee754/soft-fp/s_fsub.c: Likewise. * sysdeps/ieee754/soft-fp/s_fsubl.c: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps: Update. * sysdeps/mach/hurd/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
||
|
Wilco Dijkstra
|
610ee1fc93 |
Remove mplog and mpexp
Remove the now unused mplog and mpexp files. * math/Makefile: Remove mpexp.c and mplog.c * sysdeps/i386/fpu/mpexp.c: Delete file. * sysdeps/i386/fpu/mplog.c: Likewise. * sysdeps/ia64/fpu/mpexp.c: Likewise. * sysdeps/ia64/fpu/mplog.c: Likewise. * sysdeps/ieee754/dbl-64/e_exp.c: Remove mention of mpexp and mplog. * sysdeps/ieee754/dbl-64/mpa.h (__pow_mp): Remove unused function. * sysdeps/ieee754/dbl-64/mpexp.c: Delete file. * sysdeps/ieee754/dbl-64/mplog.c: Likewise. * sysdeps/m68k/m680x0/fpu/mpexp.c: Likewise. * sysdeps/m68k/m680x0/fpu/mplog.c: Likewise. * sysdeps/x86_64/fpu/multiarch/Makefile: Remove mpexp* and mplog*. * sysdeps/x86_64/fpu/multiarch/e_log-avx.c: Remove unused defines. * sysdeps/x86_64/fpu/multiarch/e_log-fma.c: Likewise. * sysdeps/x86_64/fpu/multiarch/e_log-fma4.c: Likewise. * sysdeps/x86_64/fpu/multiarch/mpexp-avx.c: Delete file. * sysdeps/x86_64/fpu/multiarch/mpexp-fma.c: Likewise. * sysdeps/x86_64/fpu/multiarch/mpexp-fma4.c: Likewise. * sysdeps/x86_64/fpu/multiarch/mplog-avx.c: Likewise. * sysdeps/x86_64/fpu/multiarch/mplog-fma.c: Likewise. * sysdeps/x86_64/fpu/multiarch/mplog-fma4.c: Likewise. |
||
Szabolcs Nagy
|
de800d8305 |
Remove slow paths from exp
Remove the __slowexp code, so exp is no longer correctly rounded. The result is computed to about 70 bits precision so the worst case ulp error is about 0.500007 in nearest rounding mode. * manual/probes.texi: Remove slowexp probes. * math/Makefile: Remove slowexp. * sysdeps/generic/math_private.h (__slowexp): Remove. * sysdeps/ieee754/dbl-64/e_exp.c (__ieee754_exp): Remove __slowexp and document error bounds. * sysdeps/i386/fpu/slowexp.c: Remove. * sysdeps/ia64/fpu/slowexp.c: Remove. * sysdeps/ieee754/dbl-64/slowexp.c: Remove. * sysdeps/ieee754/dbl-64/uexp.h (err_0): Remove. * sysdeps/m68k/m680x0/fpu/slowexp.c: Remove. * sysdeps/powerpc/power4/fpu/Makefile (CPPFLAGS-slowexp.c): Remove. * sysdeps/x86_64/fpu/multiarch/Makefile: Remove slowexp-fma. * sysdeps/x86_64/fpu/multiarch/e_exp-avx.c (__slowexp): Remove. * sysdeps/x86_64/fpu/multiarch/e_exp-fma.c (__slowexp): Remove. * sysdeps/x86_64/fpu/multiarch/e_exp-fma4.c (__slowexp): Remove. * sysdeps/x86_64/fpu/multiarch/slowexp-avx.c: Remove. * sysdeps/x86_64/fpu/multiarch/slowexp-fma.c: Remove. * sysdeps/x86_64/fpu/multiarch/slowexp-fma4.c: Remove. |
||
|
Wilco Dijkstra
|
c3d466cba1 |
Remove slow paths from pow
Remove the slow paths from pow. Like several other double precision math functions, pow is exactly rounded. This is not required from math functions and causes major overheads as it requires multiple fallbacks using higher precision arithmetic if a result is close to 0.5ULP. Ridiculous slowdowns of up to 100000x have been reported when the highest precision path triggers. All GLIBC math tests pass on AArch64 and x64 (with ULP of pow set to 1). The worst case error is ~0.506ULP. A simple test over a few hundred million values shows pow is 10% faster on average. This fixes BZ #13932. [BZ #13932] * sysdeps/ieee754/dbl-64/uexp.h (err_1): Remove. * benchtests/pow-inputs: Update comment for slow path cases. * manual/probes.texi (slowpow_p10): Delete removed probe. (slowpow_p10): Likewise. * math/Makefile: Remove halfulp.c and slowpow.c. * sysdeps/aarch64/libm-test-ulps: Set ULP of pow to 1. * sysdeps/generic/math_private.h (__exp1): Remove error argument. (__halfulp): Remove. (__slowpow): Remove. * sysdeps/i386/fpu/halfulp.c: Delete file. * sysdeps/i386/fpu/slowpow.c: Likewise. * sysdeps/ia64/fpu/halfulp.c: Likewise. * sysdeps/ia64/fpu/slowpow.c: Likewise. * sysdeps/ieee754/dbl-64/e_exp.c (__exp1): Remove error argument, improve comments and add error analysis. * sysdeps/ieee754/dbl-64/e_pow.c (__ieee754_pow): Add error analysis. (power1): Remove function: (log1): Remove error argument, add error analysis. (my_log2): Remove function. * sysdeps/ieee754/dbl-64/halfulp.c: Delete file. * sysdeps/ieee754/dbl-64/slowpow.c: Likewise. * sysdeps/m68k/m680x0/fpu/halfulp.c: Likewise. * sysdeps/m68k/m680x0/fpu/slowpow.c: Likewise. * sysdeps/powerpc/power4/fpu/Makefile: Remove CPPFLAGS-slowpow.c. * sysdeps/x86_64/fpu/libm-test-ulps: Set ULP of pow to 1. * sysdeps/x86_64/fpu/multiarch/Makefile: Remove slowpow-fma.c, slowpow-fma4.c, halfulp-fma.c, halfulp-fma4.c. * sysdeps/x86_64/fpu/multiarch/e_pow-fma.c (__slowpow): Remove define. * sysdeps/x86_64/fpu/multiarch/e_pow-fma4.c (__slowpow): Likewise. * sysdeps/x86_64/fpu/multiarch/halfulp-fma.c: Delete file. * sysdeps/x86_64/fpu/multiarch/halfulp-fma4.c: Likewise. * sysdeps/x86_64/fpu/multiarch/slowpow-fma.c: Likewise. * sysdeps/x86_64/fpu/multiarch/slowpow-fma4.c: Likewise. |
||
|
Joseph Myers
|
d8742dd82f |
Add narrowing add functions.
This patch adds the narrowing add functions from TS 18661-1 to glibc's libm: fadd, faddl, daddl, f32addf64, f32addf32x, f32xaddf64 for all configurations; f32addf64x, f32addf128, f64addf64x, f64addf128, f32xaddf64x, f32xaddf128, f64xaddf128 for configurations with _Float64x and _Float128; __nldbl_daddl for ldbl-opt. As discussed for the build infrastructure patch, tgmath.h support is deliberately deferred, and FP_FAST_* macros are not applicable without optimized function implementations. Function implementations are added for all relevant pairs of formats (including certain cases of a format and itself where more than one type has that format). The main implementations use round-to-odd, or a trivial computation in the case where both formats are the same or where the wider format is IBM long double (in which case we don't attempt to be correctly rounding). The sysdeps/ieee754/soft-fp implementations use soft-fp, and are used automatically for configurations without exceptions and rounding modes by virtue of existing Implies files. As previously discussed, optimized versions for particular architectures are possible, but not included. i386 gets a special version of f32xaddf64 to avoid problems with double rounding (similar to the existing fdim version), since this function must round just once without an intermediate rounding to long double. (No such special version is needed for any other function, because the nontrivial functions use round-to-odd, which does the intermediate computation with the rounding mode set to round-to-zero, and double rounding is OK except in round-to-nearest mode, so is OK for that intermediate round-to-zero computation.) mul and div will need slightly different special versions for i386 (using round-to-odd on long double instead of precision control) because of the possibility of inexact intermediate results in the subnormal range for double. To reduce duplication among the different function implementations, math-narrow.h gets macros CHECK_NARROW_ADD, NARROW_ADD_ROUND_TO_ODD and NARROW_ADD_TRIVIAL. In the trivial cases and for any architecture-specific optimized implementations, the overhead of the errno setting might be significant, but I think that's best handled through compiler built-in functions rather than providing separate no-errno versions in glibc (and likewise there are no __*_finite entry points for these function provided, __*_finite effectively being no-errno versions at present in most cases). Tested for x86_64 and x86, with both GCC 6 and GCC 7. Tested for mips64 (all three ABIs, both hard and soft float) and powerpc with GCC 7. Tested with build-many-glibcs.py with both GCC 6 and GCC 7. * math/Makefile (libm-narrow-fns): Add add. (libm-test-funcs-narrow): Likewise. * math/Versions (GLIBC_2.28): Add narrowing add functions. * math/bits/mathcalls-narrow.h (add): Use __MATHCALL_NARROW . * math/gen-auto-libm-tests.c (test_functions): Add add. * math/math-narrow.h (CHECK_NARROW_ADD): New macro. (NARROW_ADD_ROUND_TO_ODD): Likewise. (NARROW_ADD_TRIVIAL): Likewise. * sysdeps/ieee754/float128/float128_private.h (__faddl): New macro. (__daddl): Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fadd and dadd. (CFLAGS-nldbl-dadd.c): New variable. (CFLAGS-nldbl-fadd.c): Likewise. * sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add __nldbl_daddl. * sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_daddl): New prototype. * manual/arith.texi (Misc FP Arithmetic): Document fadd, faddl, daddl, fMaddfN, fMaddfNx, fMxaddfN and fMxaddfNx. * math/auto-libm-test-in: Add tests of add. * math/auto-libm-test-out-narrow-add: New generated file. * math/libm-test-narrow-add.inc: New file. * sysdeps/i386/fpu/s_f32xaddf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_f32xaddf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_fadd.c: Likewise. * sysdeps/ieee754/float128/s_f32addf128.c: Likewise. * sysdeps/ieee754/float128/s_f64addf128.c: Likewise. * sysdeps/ieee754/float128/s_f64xaddf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_daddl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_f64xaddf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_faddl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_daddl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_faddl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_daddl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_faddl.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-dadd.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-fadd.c: Likewise. * sysdeps/ieee754/soft-fp/s_daddl.c: Likewise. * sysdeps/ieee754/soft-fp/s_fadd.c: Likewise. * sysdeps/ieee754/soft-fp/s_faddl.c: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps: Update. * sysdeps/mach/hurd/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
||
|
Joseph Myers
|
8e554659ad |
Add test infrastructure for narrowing libm functions.
This patch continues preparations for adding TS 18661-1 narrowing libm functions by adding the required testsuite infrastructure to test such functions through the libm-test infrastructure. That infrastructure is based around testing for a single type, FLOAT. For the narrowing functions, FLOAT, the "main" type for testing, is the function return type; the argument type is ARG_FLOAT. This is consistent with how the code built once for each type, libm-test-support.c, depends on FLOAT for such things as calculating ulps errors in results but can already handle different argument types (pointers, integers, long double for nexttoward). Makefile machinery is added to handle building tests for all pairs of types for which there are narrowing functions (as with non-narrowing functions, aliases are tested just the same as the functions they alias). gen-auto-libm-tests gains a --narrow option for building outputs for narrowing functions (so narrowing sqrt and fma will share the same inputs as non-narrowing, but gen-auto-libm-tests will be run with and without that option to generate different output files). In the narrowing case, the auto-libm-test-out-narrow-* files include annotations for each test about what properties ARG_FLOAT must have to be able to represent all the inputs for that test; those annotations result in calls to the TEST_COND_arg_fmt macro. gen-libm-test.pl has some minor updates to handle narrowing tests (for example, arguments in such tests must be surrounded by ARG_LIT calls instead of LIT calls). Various new macros are added to the C test support code (for example, sNaN initializers need to be properly typed, so arg_snan_value is added; other such arg_* macros are added as it seems cleanest to do so, though some are not strictly required). Special-casing of the ibm128 format to allow for its limitations is adjusted to handle it as the argument format as well as as the result format; thus, the tests of the new functions allow nonzero ulps only in the case where ibm128 is the argument format, as otherwise the functions correspond to fully-defined IEEE operations. The ulps in question appear as e.g. 'Function: "add_ldouble"' in libm-test-ulps (with 1ulp errors then listed for double and float for that function in powerpc); no support is added to generate corresponding faddl / daddl ulps listings in the ulps table in the manual. For the previous patch, I noted the need to avoid spurious macro expansions of identifiers such as "add". A test test-narrow-macros.c is added to verify such macro expansions are successfully avoided, and there is also a -mlong-double-64 version of that test for ldbl-opt. This test is set up to cover the full set of relevant identifiers from the start rather than adding functions one at a time as each function group is added. Tested for x86_64 (this patch in isolation, as well as testing for various configurations in conjunction with the actual addition of "add" functions). * math/Makefile (test-type-pairs): New variable. (test-type-pairs-f64xf128-yes): Likewise. (tests): Add test-narrow-macros. (libm-test-funcs-narrow): New variable. (libm-test-c-narrow): Likewise. (generated): Add $(libm-test-c-narrow). (libm-tests-base-narrow): New variable. (libm-tests-narrow): Likewise. (libm-tests): Add $(libm-tests-narrow). (libm-tests-for-type): Handle $(libm-tests-narrow). (libm-test-c-narrow-obj): New variable. ($(libm-test-c-narrow-obj)): New rule. ($(foreach t,$(libm-tests-narrow),$(objpfx)$(t).c)): Likewise. ($(foreach f,$(libm-test-funcs-narrow),$(objpfx)$(o)-$(f).o)): Use $(o-iterator) to set dependencies and CFLAGS. * math/gen-auto-libm-tests.c: Document use for narrowing functions. (output_for_one_input_case): Take argument NARROW. (generate_output): Likewise. Update call to output_for_one_input_case. (main): Take --narrow option. Update call to generate_output. * math/gen-libm-test.pl (_apply_lit): Take macro name as argument. (apply_lit): Update call to _apply_lit. (apply_arglit): New function. (parse_args): Handle "a" arguments. (parse_auto_input): Handle format names using ":". * math/README.libm-test: Document "a" parameter type. * math/libm-test-support.h (ARG_TYPE_MIN): New macro. (ARG_TYPE_TRUE_MIN): Likewise. (ARG_TYPE_MAX): Likwise. (ARG_MIN_EXP): Likewise. (ARG_MAX_EXP): Likewise. (ARG_MANT_DIG): Likewise. (TEST_COND_arg_ibm128): Likewise. (TEST_COND_ibm128_libgcc): Define conditional on [ARG_FLOAT]. (TEST_COND_arg_fmt): New macro. (init_max_error): Update prototype. * math/libm-test-support.c (test_ibm128): New variable. (init_max_error): Take argument testing_ibm128 and set test_ibm128 instead of using [TEST_COND_ibm128] conditional. (test_exceptions): Use test_ibm128 instead of TEST_COND_ibm128. * math/libm-test-driver.c (STR_ARG_FLOAT): New macro. [TEST_NARROW] (TEST_MSG): New definition. (arg_plus_zero): New macro. (arg_minus_zero): Likewise. (arg_plus_infty): Likewise. (arg_minus_infty): Likewise. (arg_qnan_value_pl): Likewise. (arg_qnan_value): Likewise. (arg_snan_value_pl): Likewise. (arg_snan_value): Likewise. (arg_max_value): Likewise. (arg_min_value): Likewise. (arg_min_subnorm_value): Likewise. [ARG_FLOAT] (struct test_aa_f_data): New struct type. (RUN_TEST_LOOP_aa_f): New macro. (TEST_SUFF): New macro. (TEST_SUFF_STR): Likewise. [!TEST_MATHVEC] (VEC_SUFF): Don't define. (TEST_COND_any_ibm128): New macro. (START): Use TEST_SUFF and TEST_SUFF_STR in initializer for this_func. Update call to init_max_error. * math/test-double.h (FUNC_NARROW_PREFIX): New macro. * math/test-float.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float128.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-math-scalar.h (TEST_NARROW): Likewise. * math/test-math-vector.h (TEST_NARROW): Likewise. * math/test-arg-double.h: New file. * math/test-arg-float128.h: Likewise. * math/test-arg-float32x.h: Likewise. * math/test-arg-float64.h: Likewise. * math/test-arg-float64x.h: Likewise. * math/test-arg-ldouble.h: Likewise. * math/test-math-narrow.h: Likewise. * math/test-narrow-macros.c: Likewise. * sysdeps/ieee754/ldbl-opt/test-narrow-macros-ldbl-64.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (tests): Add test-narrow-macros-ldbl-64. (CFLAGS-test-narrow-macros-ldbl-64.c): New variable. |
||
|
Joseph Myers
|
63716ab270 |
Add build infrastructure for narrowing libm functions.
TS 18661-1 defines libm functions that carry out an operation (+ - * / sqrt fma) on their arguments and return a result rounded to a (usually) narrower type, as if the original result were computed to infinite precision and then rounded directly to the result type without any intermediate rounding to the argument type. For example, fadd, faddl and daddl for addition. These are the last remaining TS 18661-1 functions left to be added to glibc. TS 18661-3 extends this to corresponding functions for _FloatN and _FloatNx types. As functions parametrized by two rather than one varying floating-point types, these functions require infrastructure in glibc that was not required for previous libm functions. This patch provides such infrastructure - excluding test support, and actual function implementations, which will be in subsequent patches. Declaring the functions uses a header bits/mathcalls-narrow.h, which is included many times, for each relevant pair of types. This will end up containing macro calls of the form __MATHCALL_NARROW (__MATHCALL_NAME (add), __MATHCALL_REDIR_NAME (add), 2); for each family of narrowing functions. (The structure of this macro call, with the calls to __MATHCALL_NAME and __MATHCALL_REDIR_NAME there rather than in the definition of __MATHCALL_NARROW, arises from the names such as "add" *not* themselves being reserved identifiers - meaning it's necessary to avoid any indirection that would result in a user-defined "add" macro being expanded.) Whereas for existing functions declaring long double functions is disabled if _LIBC in the case where they alias double functions, to facilitate defining the long double functions as aliases of the double ones, there is no such logic for the narrowing functions in this patch. Rather, the files defining such functions are expected to use #define to hide the original declarations of the alias names, to avoid errors about defining aliases with incompatible types. math/Makefile support is added for building the functions (listed in libm-narrow-fns, currently empty) for all relevant pairs of types. An internal header math-narrow.h is added for macros shared between multiple function implementations - currently a ROUND_TO_ODD macro to facilitate writing functions using the round-to-odd implementation approach, and alias macros to create all the required function aliases. libc_feholdexcept_setroundf128 and libc_feupdateenv_testf128 are added for use when required (only for x86_64). float128_private.h support is added for ldbl-128 narrowing functions to be used for _Float128. Certain things are specifically omitted from this patch and the immediate followups. tgmath.h support is deferred; there remain unresolved questions about how the type-generic macros for these functions are supposed to work, especially in the case of arguments of integer type. The math.h / bits/mathcalls-narrow.h logic, and the logic for determining what functions / aliases to define, will need some adjustments to support the sqrt and fma functions, where e.g. f32xsqrtf64 can just be an alias for sqrt rather than a separate function. TS 18661-1 defines FP_FAST_* macros but no support is included for defining them (they won't in general be true without architecture-specific optimized function versions). For each of the function groups (add sub mul div sqrt fma) there are always six functions present (e.g. fadd, faddl, daddl, f32addf64, f32addf32x, f32xaddf64). When _Float64x and _Float128 are supported, there are seven more (e.g. f32addf64x, f32addf128, f64addf64x, f64addf128, f32xaddf64x, f32xaddf128, f64xaddf128). In addition, in the ldbl-opt case there are function names such as __nldbl_daddl (an alias for f32xaddf64, which is not a reserved name in TS 18661-1, only in TS 18661-3), for calls to daddl to be mapped to in the -mlong-double-64 case. (Calls to faddl just get mapped to fadd, and for sqrt and fma there won't be __nldbl_* functions because dsqrtl and dfmal can just be mapped to sqrt and fma with -mlong-double-64.) While there are six or thirteen functions present in each group (plus __nldbl_* names only as an ABI, not an API), not all are distinct; they fall in various groups of aliases. There are two distinct versions built if long double has the same format as double; four if they have distinct formats but there is no _Float64x or _Float128 support; five if long double has binary128 format; seven when _Float128 is distinct from long double. Architecture-specific optimized versions are possible, but not included in my patches. For example, IA64 generally supports narrowing the result of most floating-point instructions; Power ISA 2.07 (POWER8) supports double values as arguments to float instructions, with the results narrowed as expected; Power ISA 3 (POWER9) supports round-to-odd for float128 instructions, so meaning that approach can be used without needing to set and restore the rounding mode and test "inexact". I intend to leave any such optimized versions to the architecture maintainers. Generally in such cases it would also make sense for calls to these functions to be expanded inline (given -fno-math-errno); I put a suggestion for TS 18661-1 built-in functions at <https://gcc.gnu.org/wiki/SummerOfCode>. Tested for x86_64 (this patch in isolation, as well as testing for various configurations in conjunction with further patches). * math/bits/mathcalls-narrow.h: New file. * include/bits/mathcalls-narrow.h: Likewise. * math/math-narrow.h: Likewise. * math/math.h (__MATHCALL_NARROW_ARGS_1): New macro. (__MATHCALL_NARROW_ARGS_2): Likewise. (__MATHCALL_NARROW_ARGS_3): Likewise. (__MATHCALL_NARROW_NORMAL): Likewise. (__MATHCALL_NARROW_REDIR): Likewise. (__MATHCALL_NARROW): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)]: Repeatedly include <bits/mathcalls-narrow.h> with _Mret_, _Marg_ and __MATHCALL_NAME defined. [__GLIBC_USE (IEC_60559_TYPES_EXT)]: Likewise. * math/Makefile (headers): Add bits/mathcalls-narrow.h. (libm-narrow-fns): New variable. (libm-narrow-types-basic): Likewise. (libm-narrow-types-ldouble-yes): Likewise. (libm-narrow-types-float128-yes): Likewise. (libm-narrow-types-float128-alias-yes): Likewise. (libm-narrow-types): Likewise. (libm-routines): Add narrowing functions. * sysdeps/i386/fpu/fenv_private.h [__x86_64__] (libc_feholdexcept_setroundf128): New macro. [__x86_64__] (libc_feupdateenv_testf128): Likewise. * sysdeps/ieee754/float128/float128_private.h: Include <math/math-narrow.h>. [libc_feholdexcept_setroundf128] (libc_feholdexcept_setroundl): Undefine and redefine. [libc_feupdateenv_testf128] (libc_feupdateenv_testl): Likewise. (libm_alias_float_ldouble): Undefine and redefine. (libm_alias_double_ldouble): Likewise. |
||
|
Joseph Myers
|
bfd475876f |
Remove unused math/Makefile variable libm-test-incs.
The math/Makefile variable libm-test-incs was formerly used, but no longer is. This patch removes it. Tested for x86_64. * math/Makefile [$(PERL) != no] (libm-test-incs): Remove variable. |
||
|
Joseph Myers
|
b9256ab6bb |
Reduce command length in regen-ulps.
I found that "make regen-ulps" failed when building with unmodified GNU make 4.1, and an objdir /some/where/math/ longer than about 37 characters, because the list of tests in the "for run in $^" loop exceeded the Linux kernel's MAX_ARG_STRLEN limit (131072 bytes) on the length of a single argument passed to a command. Some GNU/Linux distributions have a patch to make to work around this limit (see e.g. Debian bug 688601), but clearly this ought to work without needing such a patch. This patch arranges for the shell loop to be over the test names without a $(objdir) prefix, which reduces the space used to less than half MAX_ARG_STRLEN. (I think we ought to aim to get rid of bits/mathinline.h completely - filing GCC bugs for any optimizations GCC can't currently do with -ffast-math - which would mean we could halve the number of libm tests run because separate inline function tests would no longer be needed. However, with a long directory name even half the number of tests could make this command exceed MAX_ARG_STRLEN without my patch.) Tested regen-ulps on a system where it failed before this patch. * math/Makefile (run-regen-ulps): Add $(objpfx) to test name here. (regen-ulps): Use $(libm-tests) not $^ in shell loop. |
||
|
Joseph Myers
|
688903eb3e |
Update copyright dates with scripts/update-copyrights.
* All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise. |
||
Gabriel F. T. Gomes
|
c85e54ac6c |
Provide a C++ version of iseqsig (bug 22377)
In C++ mode, __MATH_TG cannot be used for defining iseqsig, because __MATH_TG relies on __builtin_types_compatible_p, which is a C-only builtin. This is true when float128 is provided as an ABI-distinct type from long double. Moreover, the comparison macros from ISO C take two floating-point arguments, which need not have the same type. Choosing what underlying function to call requires evaluating the formats of the arguments, then selecting which is wider. The macro __MATH_EVAL_FMT2 provides this information, however, only the type of the macro expansion is relevant (actually evaluating the expression would be incorrect). This patch provides a C++ version of iseqsig, in which only the type of __MATH_EVAL_FMT2 (__typeof or decltype) is used as a template parameter for __iseqsig_type. This function calls the appropriate underlying function. Tested for powerpc64le and x86_64. [BZ #22377] * math/Makefile [C++] (tests): Add test for iseqsig. * math/math.h [C++] (iseqsig): New implementation, which does not rely on __MATH_TG/__builtin_types_compatible_p. * math/test-math-iseqsig.cc: New file. * sysdeps/powerpc/powerpc64le/Makefile (CFLAGS-test-math-iseqsig.cc): New variable. |
||
|
Joseph Myers
|
f1e005022e |
Revert exp reimplementation (causes test failures).
Revert: 2017-12-19 Joseph Myers <joseph@codesourcery.com> * sysdeps/x86_64/fpu/libm-test-ulps: Update. 2017-12-19 Patrick McGehearty <patrick.mcgehearty@oracle.com> * sysdeps/ieee754/dbl-64/e_exp.c: Include <math-svid-compat.h> and <errno.h>. Include "eexp.tbl". (half): New constant. (one): Likewise. (__ieee754_exp): Rewrite. (__slowexp): Remove prototype. * sysdeps/ieee754/dbl-64/eexp.tbl: New file. * sysdeps/ieee754/dbl-64/slowexp.c: Remove file. * sysdeps/i386/fpu/slowexp.c: Likewise. * sysdeps/ia64/fpu/slowexp.c: Likewise. * sysdeps/m68k/m680x0/fpu/slowexp.c: Likewise. * sysdeps/x86_64/fpu/multiarch/slowexp-avx.c: Likewise. * sysdeps/x86_64/fpu/multiarch/slowexp-fma.c: Likewise. * sysdeps/x86_64/fpu/multiarch/slowexp-fma4.c: Likewise. * sysdeps/generic/math_private.h (__slowexp): Remove prototype. * sysdeps/ieee754/dbl-64/e_pow.c: Remove mention of slowexp.c in comment. * sysdeps/powerpc/power4/fpu/Makefile [$(subdir) = math] (CPPFLAGS-slowexp.c): Remove variable. * sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines): Remove slowexp-fma, slowexp-fma4 and slowexp-avx. (CFLAGS-slowexp-fma.c): Remove variable. (CFLAGS-slowexp-fma4.c): Likewise. (CFLAGS-slowexp-avx.c): Likewise. * sysdeps/x86_64/fpu/multiarch/e_exp-avx.c (__slowexp): Do not define as macro. * sysdeps/x86_64/fpu/multiarch/e_exp-fma.c (__slowexp): Likewise. * sysdeps/x86_64/fpu/multiarch/e_exp-fma4.c (__slowexp): Likewise. * math/Makefile (type-double-routines): Remove slowexp. * manual/probes.texi (slowexp_p6): Remove. (slowexp_p32): Likewise. |
||
Patrick McGehearty
|
6fd0a3c6a8 |
Improve __ieee754_exp() performance by greater than 5x on sparc/x86.
These changes will be active for all platforms that don't provide
their own exp() routines. They will also be active for ieee754
versions of ccos, ccosh, cosh, csin, csinh, sinh, exp10, gamma, and
erf.
Typical performance gains is typically around 5x when measured on
Sparc s7 for common values between exp(1) and exp(40).
Using the glibc perf tests on sparc,
sparc (nsec) x86 (nsec)
old new old new
max 17629 395 5173 144
min 399 54 15 13
mean 5317 200 1349 23
The extreme max times for the old (ieee754) exp are due to the
multiprecision computation in the old algorithm when the true value is
very near 0.5 ulp away from an value representable in double
precision. The new algorithm does not take special measures for those
cases. The current glibc exp perf tests overrepresent those values.
Informal testing suggests approximately one in 200 cases might
invoke the high cost computation. The performance advantage of the new
algorithm for other values is still large but not as large as indicated
by the chart above.
Glibc correctness tests for exp() and expf() were run. Within the
test suite 3 input values were found to cause 1 bit differences (ulp)
when "FE_TONEAREST" rounding mode is set. No differences in exp() were
seen for the tested values for the other rounding modes.
Typical example:
exp(-0x1.760cd2p+0) (-1.46113312244415283203125)
new code: 2.31973271630014299393707e-01 0x1.db14cd799387ap-3
old code: 2.31973271630014271638132e-01 0x1.db14cd7993879p-3
exp = 2.31973271630014285508337 (high precision)
Old delta: off by 0.49 ulp
New delta: off by 0.51 ulp
In addition, because ieee754_exp() is used by other routines, cexp()
showed test results with very small imaginary input values where the
imaginary portion of the result was off by 3 ulp when in upward
rounding mode, but not in the other rounding modes. For x86, tgamma
showed a few values where the ulp increased to 6 (max ulp for tgamma
is 5). Sparc tgamma did not show these failures. I presume the tgamma
differences are due to compiler optimization differences within the
gamma function.The gamma function is known to be difficult to compute
accurately.
* sysdeps/ieee754/dbl-64/e_exp.c: Include <math-svid-compat.h> and
<errno.h>. Include "eexp.tbl".
(half): New constant.
(one): Likewise.
(__ieee754_exp): Rewrite.
(__slowexp): Remove prototype.
* sysdeps/ieee754/dbl-64/eexp.tbl: New file.
* sysdeps/ieee754/dbl-64/slowexp.c: Remove file.
* sysdeps/i386/fpu/slowexp.c: Likewise.
* sysdeps/ia64/fpu/slowexp.c: Likewise.
* sysdeps/m68k/m680x0/fpu/slowexp.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/slowexp-avx.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/slowexp-fma.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/slowexp-fma4.c: Likewise.
* sysdeps/generic/math_private.h (__slowexp): Remove prototype.
* sysdeps/ieee754/dbl-64/e_pow.c: Remove mention of slowexp.c in
comment.
* sysdeps/powerpc/power4/fpu/Makefile [$(subdir) = math]
(CPPFLAGS-slowexp.c): Remove variable.
* sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines):
Remove slowexp-fma, slowexp-fma4 and slowexp-avx.
(CFLAGS-slowexp-fma.c): Remove variable.
(CFLAGS-slowexp-fma4.c): Likewise.
(CFLAGS-slowexp-avx.c): Likewise.
* sysdeps/x86_64/fpu/multiarch/e_exp-avx.c (__slowexp): Do not
define as macro.
* sysdeps/x86_64/fpu/multiarch/e_exp-fma.c (__slowexp): Likewise.
* sysdeps/x86_64/fpu/multiarch/e_exp-fma4.c (__slowexp): Likewise.
* math/Makefile (type-double-routines): Remove slowexp.
* manual/probes.texi (slowexp_p6): Remove.
(slowexp_p32): Likewise.
|
||
H.J. Lu
|
36975e8e7e |
Replace = with += in CFLAGS-xxx.c/CPPFLAGS-xxx.c
Replace = with += in CFLAGS-xxx.c and CPPFLAGS-xxx.c to allow Makefile under sysdeps to define CFLAGS-xx.c and CPPFLAGS-xxx.c. * argp/Makefile (CFLAGS-argp-help.c): Replace = with +=. (CFLAGS-argp-parse.c): Likewise. (CFLAGS-argp-fmtstream.c): Likewise. * crypt/Makefile (CPPFLAGS-sha256-crypt.c): Likewise. (CPPFLAGS-sha512-crypt.c): Likewise. (CPPFLAGS-md5-crypt.c): Likewise. * debug/Makefile (CFLAGS-stack_chk_fail.c): Likewise. (CFLAGS-stack_chk_fail_local.c): Likewise. (CFLAGS-backtrace.c): Likewise. (CFLAGS-sprintf_chk.c): Likewise. (CFLAGS-snprintf_chk.c): Likewise. (CFLAGS-vsprintf_chk.c): Likewise. (CFLAGS-vsnprintf_chk.c): Likewise. (CFLAGS-asprintf_chk.c): Likewise. (CFLAGS-vasprintf_chk.c): Likewise. (CFLAGS-obprintf_chk.c): Likewise. (CFLAGS-dprintf_chk.c): Likewise. (CFLAGS-vdprintf_chk.c): Likewise. (CFLAGS-printf_chk.c): Likewise. (CFLAGS-fprintf_chk.c): Likewise. (CFLAGS-vprintf_chk.c): Likewise. (CFLAGS-vfprintf_chk.c): Likewise. (CFLAGS-gets_chk.c): Likewise. (CFLAGS-fgets_chk.c): Likewise. (CFLAGS-fgets_u_chk.c): Likewise. (CFLAGS-fread_chk.c): Likewise. (CFLAGS-fread_u_chk.c): Likewise. (CFLAGS-swprintf_chk.c): Likewise. (CFLAGS-vswprintf_chk.c): Likewise. (CFLAGS-wprintf_chk.c): Likewise. (CFLAGS-fwprintf_chk.c): Likewise. (CFLAGS-vwprintf_chk.c): Likewise. (CFLAGS-vfwprintf_chk.c): Likewise. (CFLAGS-fgetws_chk.c): Likewise. (CFLAGS-fgetws_u_chk.c): Likewise. (CFLAGS-read_chk.c): Likewise. (CFLAGS-pread_chk.c): Likewise. (CFLAGS-pread64_chk.c): Likewise. (CFLAGS-recv_chk.c): Likewise. (CFLAGS-recvfrom_chk.c): Likewise. (CFLAGS-tst-longjmp_chk.c): Likewise. (CPPFLAGS-tst-longjmp_chk.c): Likewise. (CFLAGS-tst-longjmp_chk2.c): Likewise. (CPPFLAGS-tst-longjmp_chk2.c): Likewise. (CFLAGS-tst-longjmp_chk3.c): Likewise. (CPPFLAGS-tst-longjmp_chk3.c): Likewise. (CFLAGS-tst-chk1.c): Likewise. (CFLAGS-tst-chk2.c): Likewise. (CFLAGS-tst-chk3.c): Likewise. (CFLAGS-tst-chk4.cc): Likewise. (CFLAGS-tst-chk5.cc): Likewise. (CFLAGS-tst-chk6.cc): Likewise. (CFLAGS-tst-lfschk1.c): Likewise. (CFLAGS-tst-lfschk2.c): Likewise. (CFLAGS-tst-lfschk3.c): Likewise. (CFLAGS-tst-lfschk4.cc): Likewise. (CFLAGS-tst-lfschk5.cc): Likewise. (CFLAGS-tst-lfschk6.cc): Likewise. (CFLAGS-tst-ssp-1.c): Likewise. * dirent/Makefile (CFLAGS-scandir.c): Likewise. (CFLAGS-scandir64.c): Likewise. (CFLAGS-scandir-tail.c): Likewise. (CFLAGS-scandir64-tail.c): Likewise. * elf/Makefile (CPPFLAGS-dl-tunables.c): Likewise. (CFLAGS-dl-tunables.c): Likewise. (CFLAGS-dl-runtime.c): Likewise. (CFLAGS-dl-lookup.c): Likewise. (CFLAGS-dl-iterate-phdr.c): Likewise. (CFLAGS-vismain.c): Likewise. (CFLAGS-tst-linkall-static.c): Likewise. (CFLAGS-tst-linkall-static.c): Likewise. (CPPFLAGS-dl-load.c): Likewise. (CFLAGS-ldconfig.c): Likewise. (CFLAGS-dl-cache.c): Likewise. (CFLAGS-cache.c): Likewise. (CFLAGS-rtld.c): Likewise. (CFLAGS-multiload.c): Likewise. (CFLAGS-filtmod1.c): Likewise. (CFLAGS-tst-align.c): Likewise. (CFLAGS-tst-align2.c): Likewise. (CFLAGS-tst-alignmod.c): Likewise. (CFLAGS-tst-alignmod2.c): Likewise. (CPPFLAGS-tst-execstack.c): Likewise. (CFLAGS-tst-ptrguard1-static.c): Likewise. (CFLAGS-tst-latepthreadmod.c): Likewise. * grp/Makefile (CFLAGS-getgrgid_r.c): Likewise. (CFLAGS-getgrnam_r.c): Likewise. (CFLAGS-getgrent_r.c): Likewise. (CFLAGS-getgrent.c): Likewise. (CFLAGS-fgetgrent.c): Likewise. (CFLAGS-fgetgrent_r.c): Likewise. (CFLAGS-putgrent.c): Likewise. (CFLAGS-initgroups.c): Likewise. (CFLAGS-getgrgid.c): Likewise. * gshadow/Makefile (CFLAGS-getsgent_r.c): Likewise. (CFLAGS-getsgent.c): Likewise. (CFLAGS-fgetsgent.c): Likewise. (CFLAGS-fgetsgent_r.c): Likewise. (CFLAGS-putsgent.c): Likewise. (CFLAGS-getsgnam.c): Likewise. (CFLAGS-getsgnam_r.c): Likewise. * iconv/Makefile (CFLAGS-iconv_prog.c): Likewise. (CFLAGS-iconv_charmap.c): Likewise. (CFLAGS-dummy-repertoire.c): Likewise. (CFLAGS-charmap.c): Likewise. (CFLAGS-linereader.c): Likewise. (CFLAGS-simple-hash.c): Likewise. (CFLAGS-gconv_conf.c): Likewise. (CFLAGS-iconvconfig.c): Likewise. * inet/Makefile (CFLAGS-gethstbyad_r.c): Likewise. (CFLAGS-gethstbyad.c): Likewise. (CFLAGS-gethstbynm_r.c): Likewise. (CFLAGS-gethstbynm.c): Likewise. (CFLAGS-gethstbynm2_r.c): Likewise. (CFLAGS-gethstbynm2.c): Likewise. (CFLAGS-gethstent_r.c): Likewise. (CFLAGS-gethstent.c): Likewise. (CFLAGS-rcmd.c): Likewise. (CFLAGS-getnetbynm_r.c): Likewise. (CFLAGS-getnetbynm.c): Likewise. (CFLAGS-getnetbyad_r.c): Likewise. (CFLAGS-getnetbyad.c): Likewise. (CFLAGS-getnetent_r.c): Likewise. (CFLAGS-getnetent.c): Likewise. (CFLAGS-getaliasent_r.c): Likewise. (CFLAGS-getaliasent.c): Likewise. (CFLAGS-getrpcent_r.c): Likewise. (CFLAGS-getrpcent.c): Likewise. (CFLAGS-getservent_r.c): Likewise. (CFLAGS-getservent.c): Likewise. (CFLAGS-getprtent_r.c): Likewise. (CFLAGS-getprtent.c): Likewise. (CFLAGS-either_ntoh.c): Likewise. (CFLAGS-either_hton.c): Likewise. (CFLAGS-getnetgrent.c): Likewise. (CFLAGS-getnetgrent_r.c): Likewise. (CFLAGS-tst-checks-posix.c): Likewise. (CFLAGS-tst-sockaddr.c): Likewise. * intl/Makefile (CFLAGS-tst-gettext.c): Likewise. (CFLAGS-tst-translit.c): Likewise. (CFLAGS-tst-gettext2.c): Likewise. (CFLAGS-tst-codeset.c): Likewise. (CFLAGS-tst-gettext3.c): Likewise. (CFLAGS-tst-gettext4.c): Likewise. (CFLAGS-tst-gettext5.c): Likewise. (CFLAGS-tst-gettext6.c): Likewise. * io/Makefile (CFLAGS-open.c): Likewise. (CFLAGS-open64.c): Likewise. (CFLAGS-creat.c): Likewise. (CFLAGS-creat64.c): Likewise. (CFLAGS-fcntl.c): Likewise. (CFLAGS-poll.c): Likewise. (CFLAGS-ppoll.c): Likewise. (CFLAGS-lockf.c): Likewise. (CFLAGS-statfs.c): Likewise. (CFLAGS-fstatfs.c): Likewise. (CFLAGS-statvfs.c): Likewise. (CFLAGS-fstatvfs.c): Likewise. (CFLAGS-fts.c): Likewise. (CFLAGS-fts64.c): Likewise. (CFLAGS-ftw.c): Likewise. (CFLAGS-ftw64.c): Likewise. (CFLAGS-lockf.c): Likewise. (CFLAGS-posix_fallocate.c): Likewise. (CFLAGS-posix_fallocate64.c): Likewise. (CFLAGS-fallocate.c): Likewise. (CFLAGS-fallocate64.c): Likewise. (CFLAGS-read.c): Likewise. (CFLAGS-write.c): Likewise. (CFLAGS-test-stat.c): Likewise. (CFLAGS-test-lfs.c): Likewise. * libio/Makefile (CFLAGS-fileops.c): Likewise. (CFLAGS-fputc.c): Likewise. (CFLAGS-fputwc.c): Likewise. (CFLAGS-freopen64.c): Likewise. (CFLAGS-freopen.c): Likewise. (CFLAGS-fseek.c): Likewise. (CFLAGS-fseeko64.c): Likewise. (CFLAGS-fseeko.c): Likewise. (CFLAGS-ftello64.c): Likewise. (CFLAGS-ftello.c): Likewise. (CFLAGS-fwide.c): Likewise. (CFLAGS-genops.c): Likewise. (CFLAGS-getc.c): Likewise. (CFLAGS-getchar.c): Likewise. (CFLAGS-getwc.c): Likewise. (CFLAGS-getwchar.c): Likewise. (CFLAGS-iofclose.c): Likewise. (CFLAGS-iofflush.c): Likewise. (CFLAGS-iofgetpos64.c): Likewise. (CFLAGS-iofgetpos.c): Likewise. (CFLAGS-iofgets.c): Likewise. (CFLAGS-iofgetws.c): Likewise. (CFLAGS-iofputs.c): Likewise. (CFLAGS-iofputws.c): Likewise. (CFLAGS-iofread.c): Likewise. (CFLAGS-iofsetpos64.c): Likewise. (CFLAGS-iofsetpos.c): Likewise. (CFLAGS-ioftell.c): Likewise. (CFLAGS-iofwrite.c): Likewise. (CFLAGS-iogetdelim.c): Likewise. (CFLAGS-iogetline.c): Likewise. (CFLAGS-iogets.c): Likewise. (CFLAGS-iogetwline.c): Likewise. (CFLAGS-ioputs.c): Likewise. (CFLAGS-ioseekoff.c): Likewise. (CFLAGS-ioseekpos.c): Likewise. (CFLAGS-iosetbuffer.c): Likewise. (CFLAGS-iosetvbuf.c): Likewise. (CFLAGS-ioungetc.c): Likewise. (CFLAGS-ioungetwc.c): Likewise. (CFLAGS-oldfileops.c): Likewise. (CFLAGS-oldiofclose.c): Likewise. (CFLAGS-oldiofgetpos64.c): Likewise. (CFLAGS-oldiofgetpos.c): Likewise. (CFLAGS-oldiofsetpos64.c): Likewise. (CFLAGS-oldiofsetpos.c): Likewise. (CFLAGS-peekc.c): Likewise. (CFLAGS-putc.c): Likewise. (CFLAGS-putchar.c): Likewise. (CFLAGS-putwc.c): Likewise. (CFLAGS-putwchar.c): Likewise. (CFLAGS-rewind.c): Likewise. (CFLAGS-wfileops.c): Likewise. (CFLAGS-wgenops.c): Likewise. (CFLAGS-oldiofopen.c): Likewise. (CFLAGS-iofopen.c): Likewise. (CFLAGS-iofopen64.c): Likewise. (CFLAGS-oldtmpfile.c): Likewise. (CFLAGS-tst_putwc.c): Likewise. * locale/Makefile (CFLAGS-md5.c): Likewise. (CFLAGS-charmap.c): Likewise. (CFLAGS-locfile.c): Likewise. (CFLAGS-charmap-dir.c): Likewise. * login/Makefile (CFLAGS-grantpt.c): Likewise. (CFLAGS-getpt.c): Likewise. (CFLAGS-pt_chown.c): Likewise. * malloc/Makefile (CFLAGS-mcheck-init.c): Likewise. (CFLAGS-obstack.c): Likewise. * math/Makefile (CFLAGS-test-tgmath3.c): Likewise. (CFLAGS-test-double-vlen4-wrappers.c): Likewise. (CFLAGS-test-double-vlen8-wrappers.c): Likewise. (CFLAGS-test-float-vlen8-wrappers.c): Likewise. (CFLAGS-test-float-vlen16-wrappers.c): Likewise. (CFLAGS-test-tgmath.c): Likewise. (CFLAGS-test-tgmath2.c): Likewise. (CFLAGS-test-tgmath-ret.c): Likewise. (CFLAGS-test-powl.c): Likewise. (CFLAGS-test-snan.c): Likewise. (CFLAGS-test-signgam-finite.c): Likewise. (CFLAGS-test-signgam-finite-c99.c): Likewise. (CFLAGS-test-signgam-finite-c11.c): Likewise. (CFLAGS-test-signgam-uchar.c): Likewise. (CFLAGS-test-signgam-uchar-init.c): Likewise. (CFLAGS-test-signgam-uchar-static.c): Likewise. (CFLAGS-test-signgam-uchar-init-static.c): Likewise. (CFLAGS-test-signgam-uint.c): Likewise. (CFLAGS-test-signgam-uint-init.c): Likewise. (CFLAGS-test-signgam-uint-static.c): Likewise. (CFLAGS-test-signgam-uint-init-static.c): Likewise. (CFLAGS-test-signgam-ullong.c): Likewise. (CFLAGS-test-signgam-ullong-init.c): Likewise. (CFLAGS-test-signgam-ullong-static.c): Likewise. (CFLAGS-test-signgam-ullong-init-static.c): Likewise. (CFLAGS-test-math-cxx11.cc): Likewise. (CFLAGS-test-math-isinff.cc): Likewise. (CFLAGS-test-math-iszero.cc): Likewise. (CFLAGS-test-math-issignaling.cc): Likewise. (CFLAGS-test-math-iscanonical.cc): Likewise. (CFLAGS-test-iszero-excess-precision.c): Likewise. (CFLAGS-test-iseqsig-excess-precision.c): Likewise. (CFLAGS-test-flt-eval-method.c): Likewise. (CFLAGS-test-fe-snans-always-signal.c): Likewise. (CFLAGS-test-finite-macros.c): Likewise. * misc/Makefile (CFLAGS-select.c): Likewise. (CFLAGS-tsearch.c): Likewise. (CFLAGS-lsearch.c): Likewise. (CFLAGS-pselect.c): Likewise. (CFLAGS-readv.c): Likewise. (CFLAGS-writev.c): Likewise. (CFLAGS-preadv.c): Likewise. (CFLAGS-preadv64.c): Likewise. (CFLAGS-pwritev.c): Likewise. (CFLAGS-pwritev64.c): Likewise. (CFLAGS-preadv2.c): Likewise. (CFLAGS-preadv64v2.c): Likewise. (CFLAGS-pwritev2.c): Likewise. (CFLAGS-pwritev64v2.c): Likewise. (CFLAGS-usleep.c): Likewise. (CFLAGS-syslog.c): Likewise. (CFLAGS-error.c): Likewise. (CFLAGS-getpass.c): Likewise. (CFLAGS-mkstemp.c): Likewise. (CFLAGS-mkstemp64.c): Likewise. (CFLAGS-getsysstats.c): Likewise. (CFLAGS-getusershell.c): Likewise. (CFLAGS-err.c): Likewise. (CFLAGS-tst-tsearch.c): Likewise. (CFLAGS-msync.c): Likewise. (CFLAGS-fdatasync.c): Likewise. (CFLAGS-fsync.c): Likewise. * nptl/Makefile (CFLAGS-nptl-init.c): Likewise. (CFLAGS-unwind.c): Likewise. (CFLAGS-unwind-forcedunwind.c): Likewise. (CFLAGS-pthread_cancel.c): Likewise. (CFLAGS-pthread_setcancelstate.c): Likewise. (CFLAGS-pthread_setcanceltype.c): Likewise. (CFLAGS-cancellation.c): Likewise. (CFLAGS-libc-cancellation.c): Likewise. (CFLAGS-pthread_exit.c): Likewise. (CFLAGS-forward.c): Likewise. (CFLAGS-pthread_testcancel.c): Likewise. (CFLAGS-pthread_join.c): Likewise. (CFLAGS-pthread_timedjoin.c): Likewise. (CFLAGS-pthread_once.c): Likewise. (CFLAGS-pthread_cond_wait.c): Likewise. (CFLAGS-sem_wait.c): Likewise. (CFLAGS-sem_timedwait.c): Likewise. (CFLAGS-fcntl.c): Likewise. (CFLAGS-lockf.c): Likewise. (CFLAGS-pread.c): Likewise. (CFLAGS-pread64.c): Likewise. (CFLAGS-pwrite.c): Likewise. (CFLAGS-pwrite64.c): Likewise. (CFLAGS-wait.c): Likewise. (CFLAGS-waitpid.c): Likewise. (CFLAGS-sigwait.c): Likewise. (CFLAGS-msgrcv.c): Likewise. (CFLAGS-msgsnd.c): Likewise. (CFLAGS-tcdrain.c): Likewise. (CFLAGS-open.c): Likewise. (CFLAGS-open64.c): Likewise. (CFLAGS-pause.c): Likewise. (CFLAGS-recv.c): Likewise. (CFLAGS-send.c): Likewise. (CFLAGS-accept.c): Likewise. (CFLAGS-sendto.c): Likewise. (CFLAGS-connect.c): Likewise. (CFLAGS-recvfrom.c): Likewise. (CFLAGS-recvmsg.c): Likewise. (CFLAGS-sendmsg.c): Likewise. (CFLAGS-close.c): Likewise. (CFLAGS-read.c): Likewise. (CFLAGS-write.c): Likewise. (CFLAGS-nanosleep.c): Likewise. (CFLAGS-sigsuspend.c): Likewise. (CFLAGS-msync.c): Likewise. (CFLAGS-fdatasync.c): Likewise. (CFLAGS-fsync.c): Likewise. (CFLAGS-pt-system.c): Likewise. (CFLAGS-tst-cleanup2.c): Likewise. (CFLAGS-tst-cleanupx2.c): Likewise. (CFLAGS-flockfile.c): Likewise. (CFLAGS-ftrylockfile.c): Likewise. (CFLAGS-funlockfile.c): Likewise. (CFLAGS-tst-initializers1.c): Likewise. (CFLAGS-tst-initializers1-c89.c): Likewise. (CFLAGS-tst-initializers1-c99.c): Likewise. (CFLAGS-tst-initializers1-c11.c): Likewise. (CFLAGS-tst-initializers1-gnu89.c): Likewise. (CFLAGS-tst-initializers1-gnu99.c): Likewise. (CFLAGS-tst-initializers1-gnu11.c): Likewise. * nscd/Makefile (CFLAGS-nscd_getpw_r.c): Likewise. (CFLAGS-nscd_getgr_r.c): Likewise. (CFLAGS-nscd_gethst_r.c): Likewise. (CFLAGS-nscd_getai.c): Likewise. (CFLAGS-nscd_initgroups.c): Likewise. * posix/Makefile (CFLAGS-getaddrinfo.c): Likewise. (CFLAGS-pause.c): Likewise. (CFLAGS-pread.c): Likewise. (CFLAGS-pread64.c): Likewise. (CFLAGS-pwrite.c): Likewise. (CFLAGS-pwrite64.c): Likewise. (CFLAGS-sleep.c): Likewise. (CFLAGS-wait.c): Likewise. (CFLAGS-waitid.c): Likewise. (CFLAGS-waitpid.c): Likewise. (CFLAGS-getopt.c): Likewise. (CFLAGS-wordexp.c): Likewise. (CFLAGS-sysconf.c): Likewise. (CFLAGS-pathconf.c): Likewise. (CFLAGS-fpathconf.c): Likewise. (CFLAGS-spawn.c): Likewise. (CFLAGS-spawnp.c): Likewise. (CFLAGS-spawni.c): Likewise. (CFLAGS-glob.c): Likewise. (CFLAGS-glob64.c): Likewise. (CFLAGS-getconf.c): Likewise. (CFLAGS-nanosleep.c): Likewise. * pwd/Makefile (CFLAGS-getpwent_r.c): Likewise. (CFLAGS-getpwent.c): Likewise. (CFLAGS-getpw.c): Likewise. (CFLAGS-fgetpwent_r.c): Likewise. * resolv/Makefile (CFLAGS-res_hconf.c): Likewise. * rt/Makefile (CFLAGS-aio_suspend.c): Likewise. (CFLAGS-mq_timedreceive.c): Likewise. (CFLAGS-mq_timedsend.c): Likewise. (CFLAGS-clock_nanosleep.c): Likewise. (CFLAGS-librt-cancellation.c): Likewise. * shadow/Makefile (CFLAGS-getspent_r.c): Likewise. (CFLAGS-getspent.c): Likewise. (CFLAGS-fgetspent.c): Likewise. (CFLAGS-fgetspent_r.c): Likewise. (CFLAGS-putspent.c): Likewise. (CFLAGS-getspnam.c): Likewise. (CFLAGS-getspnam_r.c): Likewise. * signal/Makefile (CFLAGS-sigpause.c): Likewise. (CFLAGS-sigsuspend.c): Likewise. (CFLAGS-sigtimedwait.c): Likewise. (CFLAGS-sigwait.c): Likewise. (CFLAGS-sigwaitinfo.c): Likewise. (CFLAGS-sigreturn.c): Likewise. * stdio-common/Makefile (CFLAGS-vfprintf.c): Likewise. (CFLAGS-vfwprintf.c): Likewise. (CFLAGS-tmpfile.c): Likewise. (CFLAGS-tmpfile64.c): Likewise. (CFLAGS-tempname.c): Likewise. (CFLAGS-psignal.c): Likewise. (CFLAGS-vprintf.c): Likewise. (CFLAGS-cuserid.c): Likewise. (CFLAGS-errlist.c): Likewise. (CFLAGS-siglist.c): Likewise. (CFLAGS-scanf15.c): Likewise. (CFLAGS-scanf17.c): Likewise. * stdlib/Makefile (CFLAGS-bsearch.c): Likewise. (CFLAGS-msort.c): Likewise. (CFLAGS-qsort.c): Likewise. (CFLAGS-system.c): Likewise. (CFLAGS-fmtmsg.c): Likewise. (CFLAGS-strfmon.c): Likewise. (CFLAGS-strfmon_l.c): Likewise. (CFLAGS-strfromd.c): Likewise. (CFLAGS-strfromf.c): Likewise. (CFLAGS-strfroml.c): Likewise. (CFLAGS-tst-bsearch.c): Likewise. (CFLAGS-tst-qsort.c): Likewise. (CFLAGS-tst-makecontext2.c): Likewise. * sunrpc/Makefile (CFLAGS-xbootparam_prot.c): Likewise. (CFLAGS-xnlm_prot.c): Likewise. (CFLAGS-xrstat.c): Likewise. (CFLAGS-xyppasswd.c): Likewise. (CFLAGS-xklm_prot.c): Likewise. (CFLAGS-xrex.c): Likewise. (CFLAGS-xsm_inter.c): Likewise. (CFLAGS-xmount.c): Likewise. (CFLAGS-xrusers.c): Likewise. (CFLAGS-xspray.c): Likewise. (CFLAGS-xnfs_prot.c): Likewise. (CFLAGS-xrquota.c): Likewise. (CFLAGS-xkey_prot.c): Likewise. (CFLAGS-auth_unix.c): Likewise. (CFLAGS-key_call.c): Likewise. (CFLAGS-pmap_rmt.c): Likewise. (CFLAGS-clnt_perr.c): Likewise. (CFLAGS-openchild.c): Likewise. * sysvipc/Makefile (CFLAGS-msgrcv.c): Likewise. (CFLAGS-msgsnd.c): Likewise. * termios/Makefile (CFLAGS-tcdrain.c): Likewise. * time/Makefile (CFLAGS-tzfile.c): Likewise. (CFLAGS-tzset.c): Likewise. (CFLAGS-getdate.c): Likewise. (CFLAGS-test_time.c): Likewise. (CPPFLAGS-tst-tzname.c): Likewise. * timezone/Makefile (CFLAGS-zdump.c): Likewise. (CFLAGS-zic.c): Likewise. * wcsmbs/Makefile (CFLAGS-wcwidth.c): Likewise. (CFLAGS-wcswidth.c): Likewise. (CFLAGS-wcstol.c): Likewise. (CFLAGS-wcstoul.c): Likewise. (CFLAGS-wcstoll.c): Likewise. (CFLAGS-wcstoull.c): Likewise. (CFLAGS-wcstod.c): Likewise. (CFLAGS-wcstold.c): Likewise. (CFLAGS-wcstof128.c): Likewise. (CFLAGS-wcstof.c): Likewise. (CFLAGS-wcstol_l.c): Likewise. (CFLAGS-wcstoul_l.c): Likewise. (CFLAGS-wcstoll_l.c): Likewise. (CFLAGS-wcstoull_l.c): Likewise. (CFLAGS-wcstod_l.c): Likewise. (CFLAGS-wcstold_l.c): Likewise. (CFLAGS-wcstof128_l.c): Likewise. (CFLAGS-wcstof_l.c): Likewise. (CPPFLAGS-tst-wchar-h.c): Likewise. (CPPFLAGS-wcstold_l.c): Likewise. Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> |
||
|
Joseph Myers
|
1f9055ce04 |
Add _Float32 function aliases.
This patch concludes filling out TS 18661-3 support for different types by adding *f32 function aliases of float functions to support _Float32. As with _Float64 and _Float32x, this is supported for all glibc configurations. As with the previous such patches there are some x86 ulps updates because of inline functions present for float but not for _Float32. The patch also has the usual bits/floatn-common.h update, symbol versions, ABI baselines updates, test enablement and documentation. Tested for x86_64 and x86, and with build-many-glibcs.py, with both GCC 6 and GCC 7. * bits/floatn-common.h (__HAVE_FLOAT32): Define to 1. * manual/math.texi (Mathematics): Document support for _Float32. * math/Makefile (test-types): Add float32. * math/Versions (GLIBC_2.27): Add _Float32 functions. * stdlib/Versions (GLIBC_2.27): Likewise. * wcsmbs/Versions (GLIBC_2.27): Likewise. * sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise. |
||
|
Joseph Myers
|
0d93b7fd7c |
Add _Float64, _Float32x function aliases.
This patch continues filling out TS 18661-3 support by adding *f64 and *f32x function aliases, supporting _Float64 and _Float32x, as aliases for double functions. These types are supported for all glibc configurations. The API corresponds exactly to that for _Float128 and _Float64x. _Float32 aliases to float functions remain to be added in subsequent patches to complete this process (then there are a few miscellaneous functions in TS 18661-3 to implement that aren't simply versions of existing functions for new types). The patch enables the feature in bits/floatn-common.h, adds symbol versions and documentation with updates to ABI baselines, and arranges for the libm functions for the new types to be tested. As with the _Float64x changes there are some x86 ulps updates because of header inlines not used for the new types (and one other change to the non-multiarch libm-test-ulps, which I suppose comes from using a different compiler version / configuration from when it was last regenerated). Tested for x86_64 and x86, and with build-many-glibcs.py, with both GCC 6 and GCC 7. * bits/floatn-common.h (__HAVE_FLOAT64): Define to 1. (__HAVE_FLOAT32X): Likewise. * manual/math.texi (Mathematics): Document support for _Float64 and _Float32x. * math/Makefile (test-types): Add float64 and float32x. * math/Versions (GLIBC_2.27): Add _Float64 and _Float32x functions. * stdlib/Versions (GLIBC_2.27): Likewise. * wcsmbs/Versions (GLIBC_2.27): Likewise. * sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise. |
||
|
Joseph Myers
|
ae7207d033 |
Support testing _Float64x libm functions.
This patch adds support for testing _Float64x libm functions. A configuration with such functions sets float64x-alias-fcts = yes in a sysdeps Makeconfig file; until such settings are added, this test support is inactive. Tested for x86_64, including in conjunction with _Float64x support patches. * math/test-float64x.h: New file. * math/Makefile (type-float64x-yes): New variable. (test-types): Add $(type-float64x-$(float64x-alias-fcts)). |
||
|
Joseph Myers
|
eda162dd8a |
Remove _Mlong_double_ etc. macros.
math.h has a macro _Mlong_double_ for the type to use when declaring
long double functions, and similar macros for other types.
math/Makefile uses -D_Mlong_double_=double in the case of long double
having the same ABI as double.
This originates with:
Mon Jul 8 13:37:40 1996 Roland McGrath <roland@delasyd.gnu.ai.mit.edu>
* math/math.h (_Mfloat_, _Mlong_double_): New macros, defined iff not
already defined to float, long double. Use those macros for _Mdouble_
defns when including mathcalls.h.
* math/Makefile [$(long-double-fcts) != yes] (CPPFLAGS): Append
-D_Mlong_double_=double.
However, math.h stopped declaring long double functions in the case of
long double having the same ABI as double (and thus probably stopped
actually needing the Makefile definition of _Mlong_double_) with:
1998-11-05 Ulrich Drepper <drepper@cygnus.com>
* math/math.h: Unconditionally include bits/mathdef.h. Declare
long double functions only if __NO_LONG_DOUBLE_MATH is not
defined.
* sysdeps/generic/bits/mathdef.h: Define only if __USE_ISOC9X.
Define __NO_LONG_DOUBLE_MATH.
* sysdeps/m68k/fpu/bits/mathdef.h: Define only if __USE_ISOC9X.
* sysdeps/i386/fpu/bits/mathdef.h: Likewise.
The declarations were since restored for compiling user code, but
remain absent when _LIBC is defined, which is sufficient to avoid
problems declaring function aliases of incompatible types. Thus the
indirection through the _Mlong_double_ macro is not needed (probably
since that 1998 patch), and this patch removes _Mlong_double_ and
associated macros for other types, leaving only the macro _Mdouble_
which is actually used as the type for which a given inclusion of
<bits/mathcalls.h> should declared functions.
Tested for x86_64, and tested with build-many-glibcs.py that installed
stripped shared libraries are unchanged by this patch.
* math/math.h [!_Mfloat_] (_Mfloat_): Do not define.
[!_Mlong_double_] (_Mlong_double_): Likewise.
[!_Mfloat16_] (_Mfloat16_): Likewise.
[!_Mfloat32_] (_Mfloat32_): Likewise.
[!_Mfloat64_] (_Mfloat64_): Likewise.
[!_Mfloat128_] (_Mfloat128_): Likewise.
[!_Mfloat32x_] (_Mfloat32x_): Likewise.
[!_Mfloat64x_] (_Mfloat64x_): Likewise.
[!_Mfloat128x_] (_Mfloat128x_): Likewise.
(_Mdouble_): Define without indirection through those macros.
* math/complex.h [!_Mfloat_] (_Mfloat_): Do not define.
[!_Mfloat128_] (_Mfloat128_): Likewise.
[_Mlong_double_] (_Mlong_double_): Likewise.
(_Mdouble_): Define without indirection through those macros.
* math/Makefile [$(long-double-fcts) != yes] (math-CPPFLAGS): Do
not add -D_Mlong_double_=double.
* include/math.h [_ISOMAC] (_Mlong_double_): Do not undefine.
* math/test-signgam-finite-c99.c (_Mlong_double_): Likewise.
|
||
|
Joseph Myers
|
797ba44ba2 |
Add bits/floatn.h defines for more _FloatN / _FloatNx types.
The bits/floatn.h header currently only has defines relating to _Float128. This patch adds defines relating to other _FloatN / _FloatNx types. The approach taken is to add defines for all _FloatN / _FloatNx types known to GCC, and to put them in a common bits/floatn-common.h header included at the end of all the individual bits/floatn.h headers. If in future some defines become different for different glibc configurations, they will move out into the separate bits/floatn.h headers. Some defines are expected always to be the same across glibc ports. Corresponding defines are nevertheless put in this header. The intent is that where there are conditionals (in headers or in non-installed files) that can just repeat the same or nearly the same logic for each floating-point type, they should do so, even if in fact the cases for some types could be unconditionally present or absent because the same conditionals are true or false for all glibc configurations. This should make the glibc code with such conditionals easier to read, because the reader can just see that the same conditionals are repeated for each type, rather than seeing different conditionals for different types and needing to reason, at each location with such differences, why those differences are indeed correct there. (Cases involving per-format rather than per-type logic are more likely still to need differences in how they handle different types.) Having such defines and conditionals also helps in incremental preparation for adding _Float32 / _Float64 / _Float32x / _Float64x function aliases. I intend subsequent patches to add such conditionals corresponding to those already present for _Float128, as well as making more architecture-specific function implementations use common macros to define aliases in preparation for adding such _FloatN / _FloatNx aliases. Tested for x86_64. * bits/floatn-common.h: New file. * math/Makefile (headers): Add bits/floatn-common.h. * bits/floatn.h: Include <bits/floatn-common.h>. * sysdeps/ia64/bits/floatn.h: Likewise. * sysdeps/ieee754/ldbl-128/bits/floatn.h: Likewise. * sysdeps/mips/ieee754/bits/floatn.h: Likewise. * sysdeps/powerpc/bits/floatn.h: Likewise. * sysdeps/x86/bits/floatn.h: Likewise. |
||
|
Joseph Myers
|
596f70134a |
Support running libm tests for float128 as alias for long double.
This patch adds support for running libm tests for float128 in the case where the float128 functions are aliases of long double functions. In this case, the sysdeps Makeconfig file (i.e. sysdeps/ieee754/ldbl-128/Makeconfig) will need to define "float128-alias-fcts = yes" to enable the tests. Tested for x86_64. Also tested with build-many-glibcs.py; installed stripped shared libraries are unchanged by the patch. Also tested together with changes to enable the float128 aliases. * math/Makefile (test-types): Add $(type-float128-$(float128-alias-fcts)). * math/test-float128.h (TYPE_STR): Define conditional on [FLT128_MANT_DIG == LDBL_MANT_DIG]. (ULP_IDX): Likewise. (ULP_I_IDX): Likewise. |
||
|
Joseph Myers
|
bc9620d040 |
Run libm long double tests for long double = double.
All interfaces in the glibc API ought to be covered by the testsuite, even where they alias other interfaces. This patch arranges for libm tests to be run for long double when it aliases double; previously those tests were run only for the floating-point types with distinct formats. The long double tests are made to use the double ulps values in this case, as having a separate duplicate set of ulps for them seems unnecessary; to accommodate that, the test-<type>.h headers now specify the macro indexing into the ulps array explicitly instead of having it computed from PREFIX. Nothing special is done about vector function tests. None are supported for any long double = double platforms, and supporting vector functions for a type alias such as _Float32 would not simply fall out of adding the scalar aliases for that type - it would require vector function wrappers like those for *_finite (or, better, a new GCC feature to allow specifying the asm name for vector functions independently of that for scalar ones, as previously discussed), so it seems reasonable to require the sysdeps makefile setting of libmvec-tests to be updated if any such tests are to be run for type aliases. Tested for x86_64 and arm. * math/Makefile (test-types-basic): New variable. (test-types): Likewise. (libm-test-support): Use $(test-types) instead of $(types). (libm-tests-base-normal): Likewise. (libm-tests-base-finite): Likewise. (libm-tests-base-inline): Likewise. (generated): Likewise. ($(objpfx)libm-test-support-$(t).c): Likewise. (libm-tests-for-type iterator): Likewise. (libm-test-support iterator): Likewise. * math/libm-test-support.c (ulp_i_idx): Use ULP_I_IDX. (ulp_idx): Use ULP_IDX. * math/test-ldouble.h: Include <float.h>. (TYPE_STR): Define conditional on [LDBL_MANT_DIG == DBL_MANT_DIG]. (ULP_IDX): New macro. (ULP_I_IDX): Likewise. * math/test-double.h (ULP_IDX): Likewise. (ULP_I_IDX): Likewise. * math/test-float.h (ULP_IDX): Likewise. (ULP_I_IDX): Likewise. * math/test-float128.h (ULP_IDX): Likewise. (ULP_I_IDX): Likewise. |
||
Jonathan Wakely
|
d6c064e914 |
Ensure C99 and C11 interfaces are available for C++ [BZ #21326]
This patch ensures that the C99 and C11 features required by C++ are defined according to the value of the __cplusplus macro, and not just because G++ always defines _GNU_SOURCE. This will allow G++ to stop defining _GNU_SOURCE some day, without causing the C99 and C11 interfaces to disappear for C++ programs. [BZ #21326] * include/features.h [__cplusplus >= 201103] (__USE_ISOC99): Define. [__cplusplus >= 201703] (__USE_ISOCXX17, __USE_ISOC11): Define. * math/Makefile (test-math-cxx11): New test. * math/test-math-cxx11.cc: New file. |
||
|
Gabriel F. T. Gomes
|
aa0235dfde |
Add C++ versions of iscanonical for ldbl-96 and ldbl-128ibm (bug 22235)
All representations of floating-point numbers in types with IEC 60559 binary exchange format are canonical. On the other hand, types with IEC 60559 extended formats, such as those implemented under ldbl-96 and ldbl-128ibm, contain representations that are not canonical. TS 18661-1 introduced the type-generic macro iscanonical, which returns whether a floating-point value is canonical or not. In Glibc, this type-generic macro is implemented using the macro __MATH_TG, which, when support for float128 is enabled, relies on __builtin_types_compatible_p to select between floating-point types. However, this use of iscanonical breaks C++ applications, because the builtin is only available in C mode. This patch provides a C++ implementation of iscanonical that relies on function overloading, rather than builtins, to select between floating-point types. Unlike the C++ implementations for iszero and issignaling, this implementation ignores __NO_LONG_DOUBLE_MATH. The double type always matches IEC 60559 double format, which is always canonical. Thus, when double and long double are the same (__NO_LONG_DOUBLE_MATH), iscanonical always returns 1 and is not implemented with __MATH_TG. Tested for powerpc64, powerpc64le and x86_64. [BZ #22235] * math/math.h: Trivial fix for unbalanced parentheses in comment. * math/Makefile [CXX] (tests): Add test-math-iscanonical.cc. (CFLAGS-test-math-iscanonical.cc): New variable. * math/test-math-iscanonical.cc: New file. * sysdeps/ieee754/ldbl-96/bits/iscanonical.h (iscanonical): Provide a C++ implementation based on function overloading, rather than using __MATH_TG, which uses C-only builtins. * sysdeps/ieee754/ldbl-128ibm/bits/iscanonical.h (iscanonical): Likewise. * sysdeps/powerpc/powerpc64le/Makefile (CFLAGS-test-math-iscanonical.cc): New variable. |
||
|
Szabolcs Nagy
|
4ea49f4c08 |
New generic powf
without wrapper on aarch64: powf reciprocal-throughput: 4.2x faster powf latency: 2.6x faster old worst-case error: 1.11 ulp new worst-case error: 0.82 ulp aarch64 .text size: -780 bytes aarch64 .rodata size: +144 bytes powf(x,y) is implemented as exp2(y*log2(x)) with the same algorithms that are used in exp2f and log2f, except that the log2f polynomial is larger for extra precision and its output (and exp2f input) may be scaled by a power of 2 (POWF_SCALE) to simplify the argument reduction step of exp2 (possible when efficient round and convert toint operation is available). The special case handling tries to minimize the checks in the hot path. When the input of exp2_inline is checked, int arithmetics is used as that was faster on the tested aarch64 cores. * math/Makefile (type-float-routines): Add e_powf_log2_data. * sysdeps/ieee754/flt-32/e_powf.c: New implementation. * sysdeps/ieee754/flt-32/e_powf_log2_data.c: New file. * sysdeps/ieee754/flt-32/math_config.h (__powf_log2_data): Define. (issignalingf_inline): Likewise. (POWF_LOG2_TABLE_BITS): Likewise. (POWF_LOG2_POLY_ORDER): Likewise. (POWF_SCALE_BITS): Likewise. (POWF_SCALE): Likewise. * sysdeps/i386/fpu/e_powf_log2_data.c: New file. * sysdeps/ia64/fpu/e_powf_log2_data.c: New file. * sysdeps/m68k/m680x0/fpu/e_powf_log2_data.c: New file. |
||
|
Szabolcs Nagy
|
875c76c704 |
New generic log2f
Similar to the new logf: double precision arithmetics and a small lookup table is used. The argument reduction step is the same as in the new logf. without wrapper on aarch64: log2f reciprocal-throughput: 2.3x faster log2f latency: 2.1x faster old worst case error: 1.72 ulp new worst case error: 0.75 ulp aarch64 .text size: -252 bytes aarch64 .rodata size: +244 bytes * math/Makefile (type-float-routines): Add e_log2f_data. * sysdeps/ieee754/flt-32/e_log2f.c: New implementation. * sysdeps/ieee754/flt-32/e_log2f_data.c: New file. * sysdeps/ieee754/flt-32/math_config.h (__log2f_data): Define. (LOG2F_TABLE_BITS, LOG2F_POLY_ORDER): Define. * sysdeps/i386/fpu/e_log2f_data.c: New file. * sysdeps/ia64/fpu/e_log2f_data.c: New file. * sysdeps/m68k/m680x0/fpu/e_log2f_data.c: New file. |
||
|
Szabolcs Nagy
|
bf27d3973d |
New generic logf
without wrapper on aarch64: logf reciprocal-throughput: 2.2x faster logf latency: 1.9x faster old worst case error: 0.89 ulp new worst case error: 0.82 ulp aarch64 .text size: -356 bytes aarch64 .rodata size: +240 bytes Uses double precision arithmetics and a lookup table to allow smaller polynomial and avoid the use of division. Data is in a separate translation unit with fixed layout to prevent the compiler generating suboptimal literal access. Errors are handled inline according to POSIX rules, but this patch keeps the wrapper with SVID compatible error handling. Needs libm-test-ulps adjustment for clogf in non-nearest rounding mode. * math/Makefile (type-float-routines): Add e_logf_data. * sysdeps/ieee754/flt-32/e_logf.c: New implementation. * sysdeps/ieee754/flt-32/e_logf_data.c: New file. * sysdeps/ieee754/flt-32/math_config.h (__logf_data): Define. (LOGF_TABLE_BITS, LOGF_POLY_ORDER): Define. * sysdeps/i386/fpu/e_logf_data.c: New file. * sysdeps/ia64/fpu/e_logf_data.c: New file. * sysdeps/m68k/m680x0/fpu/e_logf_data.c: New file. |
||
|
Szabolcs Nagy
|
72aa623345 |
Optimized generic expf and exp2f with wrappers
Based on new expf and exp2f code from https://github.com/ARM-software/optimized-routines/ with wrapper on aarch64: expf reciprocal-throughput: 2.3x faster expf latency: 1.7x faster without wrapper on aarch64: expf reciprocal-throughput: 3.3x faster expf latency: 1.7x faster without wrapper on aarch64: exp2f reciprocal-throughput: 2.8x faster exp2f latency: 1.3x faster libm.so size on aarch64: .text size: -152 bytes .rodata size: -1740 bytes expf/exp2f worst case nearest rounding error: 0.502 ulp worst case non-nearest rounding error: 1 ulp Error checks are inline and errno setting is in separate tail called functions, but the wrappers are kept in this patch to handle the _LIB_VERSION==_SVID_ case. (So e.g. errno is set twice for expf calls and once for __expf_finite calls on targets where the new code is used.) Double precision arithmetics is used which is expected to be faster on most targets (including soft-float) than using single precision and it is easier to get good precision result with it. Const data is kept in a separate translation unit which complicates maintenance a bit, but is expected to give good code for literal loads on most targets and allows sharing data across expf, exp2f and powf. (This data is disabled on i386, m68k and ia64 which have their own expf, exp2f and powf code.) Some details may need target specific tweaks: - best convert and round to int operation in the arg reduction may be different across targets. - code was optimized on fma target, optimal polynomial eval may be different without fma. - gcc does not always generate good code for fp bit representation access via unions or it may be inherently slow on some targets. The libm-test-ulps will need adjustment because.. - The argument reduction ideally uses nearest rounded rint, but that is not efficient on most targets, so the polynomial can get evaluated on a wider interval in non-nearest rounding mode making 1 ulp errors common in that case. - The polynomial is evaluated such that it may have 1 ulp error on negative tiny inputs with upward rounding. * math/Makefile (type-float-routines): Add math_errf and e_exp2f_data. * sysdeps/aarch64/fpu/math_private.h (TOINT_INTRINSICS): Define. (roundtoint, converttoint): Likewise. * sysdeps/ieee754/flt-32/e_expf.c: New implementation. * sysdeps/ieee754/flt-32/e_exp2f.c: New implementation. * sysdeps/ieee754/flt-32/e_exp2f_data.c: New file. * sysdeps/ieee754/flt-32/math_config.h: New file. * sysdeps/ieee754/flt-32/math_errf.c: New file. * sysdeps/ieee754/flt-32/t_exp2f.h: Remove. * sysdeps/i386/fpu/e_exp2f_data.c: New file. * sysdeps/i386/fpu/math_errf.c: New file. * sysdeps/ia64/fpu/e_exp2f_data.c: New file. * sysdeps/ia64/fpu/math_errf.c: New file. * sysdeps/m68k/m680x0/fpu/e_exp2f_data.c: New file. * sysdeps/m68k/m680x0/fpu/math_errf.c: New file. |
||
|
Joseph Myers
|
c0c49d60cf |
Simplify NAN definitions.
Similar to my patches for HUGE_VAL and INFINITY. this patch eliminates
the bits/nan.h headers. __builtin_nanf ("") is used to define NAN for
GCC 3.3 and later; the fallback is (0.0f / 0.0f), which is a constant
expression for a quiet NaN of type float, but raises a spurious
"invalid" exception outside static initializers, which seems the best
that can be done purely in standard C. Again, if anyone actually uses
a compiler with its own incompatible extension for producing a
constant quiet NaN, we can add compiler conditionals.
Tested for x86_64.
* math/math.h [__USE_ISOC99] (NAN): Define directly here. Do not
include <bits/nan.h>.
* math/Makefile (headers): Remove bits/nan.h.
* bits/nan.h: Remove.
* sysdeps/ieee754/bits/nan.h: Likewise.
* sysdeps/mips/bits/nan.h: Likewise.
|
||
|
Joseph Myers
|
5ef1b2138d |
Simplify INFINITY definitions.
Similar to my patch for HUGE_VAL, this patch eliminates the bits/inf.h headers and just unconditionally uses the same definitions as the sysdeps/ieee754 version did (__builtin_inff () for GCC >= 3.3, otherwise HUGE_VALF), directly in math.h, so removing an unnecessary level of indirection. Tested for x86_64. * math/math.h [__USE_ISOC99] (INFINITY): Define directly here. Do not include <bits/inf.h>. * math/Makefile (headers): Remove bits/inf.h. * bits/inf.h: Remove. * sysdeps/ieee754/bits/inf.h: Likewise. |
||
|
Joseph Myers
|
a60eca2e55 |
Simplify HUGE_VAL definitions.
There are various bits/huge_val*.h headers to define HUGE_VAL and related macros. All of them use __builtin_huge_val etc. for GCC 3.3 and later. Then there are various fallbacks, such as using a large hex float constant for GCC 2.96 and later, or using unions (with or without compound literals) to construct the bytes of an infinity, with this last being the reason for having architecture-specific files. Supporting TS 18661-3 _FloatN / _FloatNx types that have the same format as other supported types will mean adding more such macros; needing to add more headers for them doesn't seem very desirable. The fallbacks based on bytes of the representation of an infinity do not meet the standard requirements for a constant expression. At least one of them is also wrong: sysdeps/sh/bits/huge_val.h is producing a mixed-endian representation which does not match what GCC does. This patch eliminates all those headers, defining the macros directly in math.h. For GCC 3.3 and later, the built-in functions are used as now. For other compilers, a large constant 1e10000 (with appropriate suffix) is used. This is like the fallback for GCC 2.96 and later, but without using hex floats (which have no apparent advantage here). It is unambiguously valid standard C for all floating-point formats with infinities, which covers all formats supported by glibc or likely to be supported by glibc in future (C90 DR#025 said that if a floating-point format represents infinities, all real values lie within the range of representable values, so the constraints for constant expressions are not violated), but may generate compiler warnings and wouldn't handle the TS 18661-1 FENV_ROUND pragma correctly. If someone is actually using a compiler with glibc that does not claim to be GCC 3.3 or later, but which has a better way to define the HUGE_VAL macros, we can always add compiler conditionals in with alternative definitions. I intend to make similar changes for INF and NAN. The SNAN macros already just use __builtin_nans etc. with no fallback for compilers not claiming to be GCC 3.3 or later. Tested for x86_64. * math/math.h: Do not include bits/huge_val.h, bits/huge_valf.h, bits/huge_vall.h or bits/huge_val_flt128.h. (HUGE_VAL): Define directly here. [__USE_ISOC99] (HUGE_VALF): Likewise. [__USE_ISOC99] (HUGE_VALL): Likewise. [__HAVE_FLOAT128 && __GLIBC_USE (IEC_60559_TYPES_EXT)] (HUGE_VAL_F128): Likewise. * math/Makefile (headers): Remove bits/huge_val.h, bits/huge_valf.h, bits/huge_vall.h and bits/huge_val_flt128.h. * bits/huge_val.h: Remove. * bits/huge_val_flt128.h: Likewise. * bits/huge_valf.h: Likewise. * bits/huge_vall.h: Likewise. * sysdeps/ia64/bits/huge_vall.h: Likewise. * sysdeps/ieee754/bits/huge_val.h: Likewise. * sysdeps/ieee754/bits/huge_valf.h: Likewise. * sysdeps/m68k/m680x0/bits/huge_vall.h: Likewise. * sysdeps/sh/bits/huge_val.h: Likewise. * sysdeps/sparc/bits/huge_vall.h: Likewise. * sysdeps/x86/bits/huge_vall.h: Likewise. |
||
|
Joseph Myers
|
7daada0319 |
Fix bits/math-finite.h _MSUF_ expansion namespace (bug 22028).
The current bits/math-finite.h approach to defining functions for different types, involving math.h defining _MSUF_ and _MSUFTO_ for the function suffixes involved, is not namespace-clean if one of those suffixes (f, l, f128) is defined as a macro by the user before math.h is included; too many levels of macro expansion occur. Instead, those suffixes should appear directly in the expansion of the macro using ## so they don't get expanded even if defined as macros by the user (that is, math.h should be defining __REDIRFROM_X and __REDIRTO_X directly to use those suffixes rather than suffixes being passed as an argument by macro callers). This patch makes that change. Tested for x86_64. [BZ #22028] * math/math.h [__FINITE_MATH_ONLY__ && __FINITE_MATH_ONLY__ > 0] (_MSUF_): Remove macro. [__FINITE_MATH_ONLY__ && __FINITE_MATH_ONLY__ > 0] (_MSUFTO_): Likewise. [__FINITE_MATH_ONLY__ && __FINITE_MATH_ONLY__ > 0] (__REDIRFROM_X): New macro. [__FINITE_MATH_ONLY__ && __FINITE_MATH_ONLY__ > 0] (__REDIRTO_X): Likewise. * math/bits/math-finite.h (__REDIRFROM_X): Remove macro. (__REDIRTO_X): Likewise. (__MATH_REDIRCALL): Do not pass _MSUF_ or _MSUFTO_ macro arguments. (__MATH_REDIRCALL_2): Likewise. (__MATH_REDIRCALL_INTERNAL): Likewise. (__REDIRFROM (lgamma, , _MSUF_)): Likewise. (__REDIRFROM (gamma, , _MSUF_)): Likweise. (__REDIRFROM (__gamma, _r_finite, _MSUF_)): Likewise. (__REDIRFROM (tgamma, , _MSUF_)): Likewise. * math/test-finite-macros.c: New file. * math/Makefile (tests): Add test-finite-macros. (CFLAGS-test-finite-macros.c): New variable. |
||
Gabriel F. T. Gomes
|
a16e8bc08e |
Provide a C++ version of issignaling that does not use __MATH_TG
The macro __MATH_TG contains the logic to select between long double and _Float128, when these types are ABI-distinct. This logic relies on __builtin_types_compatible_p, which is not available in C++ mode. On the other hand, C++ function overloading provides the means to distinguish between the floating-point types. The overloading resolution will match the correct parameter regardless of type qualifiers, i.e.: const and volatile. Tested for powerpc64le, s390x, and x86_64. * math/math.h [defined __cplusplus] (issignaling): Provide a C++ definition for issignaling that does not rely on __MATH_TG, since __MATH_TG uses __builtin_types_compatible_p, which is only available in C mode. (CFLAGS-test-math-issignaling.cc): New variable. * math/Makefile [CXX] (tests): Add test-math-issignaling. * math/test-math-issignaling.cc: New test for C++ implementation of type-generic issignaling. * sysdeps/powerpc/powerpc64le/Makefile [subdir == math] (CXXFLAGS-test-math-issignaling.cc): Add -mfloat128 to the build options of test-math-issignaling on powerpc64le. |
||
Florian Weimer
|
a4d57b7947 | math: Statically link tests of internal functionality | ||
|
Joseph Myers
|
813378e9fe |
Obsolete matherr, _LIB_VERSION, libieee.a.
This patch obsoletes support for SVID libm error handling (the system where a user-defined function matherr is called on a libm function error; only enabled if you also set _LIB_VERSION = _SVID_ or _LIB_VERSION = _XOPEN_) and the use of the _LIB_VERSION global variable to control libm error handling. matherr and _LIB_VERSION are made into compat symbols, not supported for new ports or for static linking. The libieee.a object file (which sets _LIB_VERSION = _IEEE_, so disabling errno setting for some functions) is also removed, and all the related definitions are removed from math.h. The manual already recommends against using matherr, and it's already not supported for _Float128 functions (those use new wrappers that don't support matherr, only errno) - this patch means that it becomes possible to e.g. add sinf32 as an alias to sinf without that resulting in undesired matherr support in sinf32 for existing glibc ports. matherr support is not part of any standard supported by glibc (it was removed in XPG4). Because matherr is a function to be defined by the user, of course user programs defining such a function will still continue to link; it just quietly won't be used. If they try to write to the library's copy of _LIB_VERSION to enable SVID error handling, however, they will get a link error (but if they define their own _LIB_VERSION variable, they won't). I expect the most likely case of build failures from this patch to be programs with unconditional cargo-culted uses of -lieee (based on a notion of "I want IEEE floating point", not any actual requirement for that library). Ideally, the new-port-or-static-linking case would use the new wrappers used for _Float128. This is not implemented in this patch, because of the complication of architecture-specific (powerpc32 and sparc) sqrt wrappers that use _LIB_VERSION and __kernel_standard directly. Thus, the old wrappers and __kernel_standard are still built unconditionally, and _LIB_VERSION still exists in static libm. But when the old wrappers and __kernel_standard are built in the non-compat case, _LIB_VERSION and matherr are defined as macros so code to support those features isn't actually built into static libm or new ports' shared libm after this patch. I intend to move to the new wrappers for static libm and new ports in followup patches. I believe the sqrt wrappers for powerpc32 and sparc can reasonably be removed. GCC already optimizes the normal case of sqrt by generating code that uses a hardware instruction and only calls the sqrt function if the argument was negative (if -fno-math-errno, of course, it just uses the hardware instruction without any check for negative argument being needed). Thus those wrappers will only actually get called in the case of negative arguments, which is not a case it makes sense to optimize for. But even without removing the powerpc32 and sparc wrappers it should still be possible to move to the new wrappers for static libm and new ports, just without having those dubious architecture-specific optimizations in static libm. Everything said about matherr equally applies to matherrf and matherrl (IA64-specific, undocumented), except that the structure of IA64 libm means it won't be converted to using the new wrappers (it doesn't use the old ones either, but its own error-handling code instead). As with other tests of compat symbols, I expect test-matherr and test-matherr-2 to need to become appropriately conditional once we have a system for disabling such tests for ports too new to have the relevant symbols. Tested for x86_64 and x86, and with build-many-glibcs.py. * math/math.h [__USE_MISC] (_LIB_VERSION_TYPE): Remove. [__USE_MISC] (_LIB_VERSION): Likewise. [__USE_MISC] (struct exception): Likewise. [__USE_MISC] (matherr): Likewise. [__USE_MISC] (DOMAIN): Likewise. [__USE_MISC] (SING): Likewise. [__USE_MISC] (OVERFLOW): Likewise. [__USE_MISC] (UNDERFLOW): Likewise. [__USE_MISC] (TLOSS): Likewise. [__USE_MISC] (PLOSS): Likewise. [__USE_MISC] (HUGE): Likewise. [__USE_XOPEN] (MAXFLOAT): Define even if [__USE_MISC]. * math/math-svid-compat.h: New file. * conform/linknamespace.pl (@whitelist): Remove matherr, matherrf and matherrl. * include/math.h [!_ISOMAC] (__matherr): Remove. * manual/arith.texi (FP Exceptions): Do not document matherr. * math/Makefile (tests): Change test-matherr to test-matherr-3. (tests-internal): New variable. (install-lib): Do not add libieee.a. (non-lib.a): Likewise. (extra-objs): Do not add libieee.a and ieee-math.o. (CPPFLAGS-s_lib_version.c): Remove variable. ($(objpfx)libieee.a): Remove rule. ($(addprefix $(objpfx), $(tests-internal)): Depend on $(libm). * math/ieee-math.c: Remove. * math/libm-test-support.c (matherr): Remove. * math/test-matherr.c: Use <support/test-driver.c>. Add copyright and license notices. Include <math-svid-compat.h> and <shlib-compat.h>. (matherr): Undefine as macro. Use compat_symbol_reference. (_LIB_VERSION): Likewise. * math/test-matherr-2.c: New file. * math/test-matherr-3.c: Likewise. * sysdeps/generic/math_private.h (__kernel_standard): Remove declaration. (__kernel_standard_f): Likewise. (__kernel_standard_l): Likewise. * sysdeps/ieee754/s_lib_version.c: Do not include <math.h> or <math_private.h>. Include <math-svid-compat.h>. (_LIB_VERSION): Undefine as macro. (_LIB_VERSION_INTERNAL): Always initialize to _POSIX_. Define only if [LIBM_SVID_COMPAT || !defined SHARED]. If [LIBM_SVID_COMPAT], use compat_symbol. * sysdeps/ieee754/s_matherr.c: Do not include <math.h> or <math_private.h>. Include <math-svid-compat.h>. (matherr): Undefine as macro. (__matherr): Define only if [LIBM_SVID_COMPAT]. Use compat_symbol. * sysdeps/ia64/fpu/libm_error.c: Include <math-svid-compat.h>. [_LIBC && LIBM_SVID_COMPAT] (matherrf): Use compat_symbol_reference. [_LIBC && LIBM_SVID_COMPAT] (matherrl): Likewise. [_LIBC && !LIBM_SVID_COMPAT] (matherrf): Define as macro. [_LIBC && !LIBM_SVID_COMPAT] (matherrl): Likewise. * sysdeps/ia64/fpu/libm_support.h: Include <math-svid-compat.h>. (MATHERR_D): Remove declaration. [!_LIBC] (_LIB_VERSION_TYPE): Likewise [!LIBM_BUILD] (_LIB_VERSIONIMF): Likewise. [LIBM_BUILD] (pmatherrf): Likewise. [LIBM_BUILD] (pmatherr): Likewise. [LIBM_BUILD] (pmatherrl): Likewise. (DOMAIN): Likewise. (SING): Likewise. (OVERFLOW): Likewise. (UNDERFLOW): Likewise. (TLOSS): Likewise. (PLOSS): Likewise. * sysdeps/ia64/fpu/s_matherrf.c: Include <math-svid-compat.h>. (__matherrf): Define only if [LIBM_SVID_COMPAT]. Use compat_symbol. * sysdeps/ia64/fpu/s_matherrl.c: Include <math-svid-compat.h>. (__matherrl): Define only if [LIBM_SVID_COMPAT]. Use compat_symbol. * math/lgamma-compat.h: Include <math-svid-compat.h>. * math/w_acos_compat.c: Likewise. * math/w_acosf_compat.c: Likewise. * math/w_acosh_compat.c: Likewise. * math/w_acoshf_compat.c: Likewise. * math/w_acoshl_compat.c: Likewise. * math/w_acosl_compat.c: Likewise. * math/w_asin_compat.c: Likewise. * math/w_asinf_compat.c: Likewise. * math/w_asinl_compat.c: Likewise. * math/w_atan2_compat.c: Likewise. * math/w_atan2f_compat.c: Likewise. * math/w_atan2l_compat.c: Likewise. * math/w_atanh_compat.c: Likewise. * math/w_atanhf_compat.c: Likewise. * math/w_atanhl_compat.c: Likewise. * math/w_cosh_compat.c: Likewise. * math/w_coshf_compat.c: Likewise. * math/w_coshl_compat.c: Likewise. * math/w_exp10_compat.c: Likewise. * math/w_exp10f_compat.c: Likewise. * math/w_exp10l_compat.c: Likewise. * math/w_exp2_compat.c: Likewise. * math/w_exp2f_compat.c: Likewise. * math/w_exp2l_compat.c: Likewise. * math/w_fmod_compat.c: Likewise. * math/w_fmodf_compat.c: Likewise. * math/w_fmodl_compat.c: Likewise. * math/w_hypot_compat.c: Likewise. * math/w_hypotf_compat.c: Likewise. * math/w_hypotl_compat.c: Likewise. * math/w_j0_compat.c: Likewise. * math/w_j0f_compat.c: Likewise. * math/w_j0l_compat.c: Likewise. * math/w_j1_compat.c: Likewise. * math/w_j1f_compat.c: Likewise. * math/w_j1l_compat.c: Likewise. * math/w_jn_compat.c: Likewise. * math/w_jnf_compat.c: Likewise. * math/w_jnl_compat.c: Likewise. * math/w_lgamma_main.c: Likewise. * math/w_lgamma_r_compat.c: Likewise. * math/w_lgammaf_main.c: Likewise. * math/w_lgammaf_r_compat.c: Likewise. * math/w_lgammal_main.c: Likewise. * math/w_lgammal_r_compat.c: Likewise. * math/w_log10_compat.c: Likewise. * math/w_log10f_compat.c: Likewise. * math/w_log10l_compat.c: Likewise. * math/w_log2_compat.c: Likewise. * math/w_log2f_compat.c: Likewise. * math/w_log2l_compat.c: Likewise. * math/w_log_compat.c: Likewise. * math/w_logf_compat.c: Likewise. * math/w_logl_compat.c: Likewise. * math/w_pow_compat.c: Likewise. * math/w_powf_compat.c: Likewise. * math/w_powl_compat.c: Likewise. * math/w_remainder_compat.c: Likewise. * math/w_remainderf_compat.c: Likewise. * math/w_remainderl_compat.c: Likewise. * math/w_scalb_compat.c: Likewise. * math/w_scalbf_compat.c: Likewise. * math/w_scalbl_compat.c: Likewise. * math/w_sinh_compat.c: Likewise. * math/w_sinhf_compat.c: Likewise. * math/w_sinhl_compat.c: Likewise. * math/w_sqrt_compat.c: Likewise. * math/w_sqrtf_compat.c: Likewise. * math/w_sqrtl_compat.c: Likewise. * math/w_tgamma_compat.c: Likewise. * math/w_tgammaf_compat.c: Likewise. * math/w_tgammal_compat.c: Likewise. * sysdeps/ieee754/dbl-64/w_exp_compat.c: Likewise. * sysdeps/ieee754/flt-32/w_expf_compat.c: Likewise. * sysdeps/ieee754/k_standard.c: Likewise. * sysdeps/ieee754/k_standardf.c: Likewise. * sysdeps/ieee754/k_standardl.c: Likewise. * sysdeps/ieee754/ldbl-128/w_expl_compat.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/w_expl_compat.c: Likewise. * sysdeps/ieee754/ldbl-96/w_expl_compat.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/w_sqrt_compat.S: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/w_sqrtf_compat.S: Likewise. * sysdeps/powerpc/powerpc32/power5/fpu/w_sqrt_compat.S: Likewise. * sysdeps/powerpc/powerpc32/power5/fpu/w_sqrtf_compat.S: Likewise. * sysdeps/sparc/sparc32/fpu/w_sqrt_compat.S: Likewise. * sysdeps/sparc/sparc32/fpu/w_sqrtf_compat.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrt_compat-vis3.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrtf_compat-vis3.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/w_sqrt_compat.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/w_sqrtf_compat.S: Likewise. * sysdeps/sparc/sparc64/fpu/w_sqrt_compat.S: Likewise. * sysdeps/sparc/sparc64/fpu/w_sqrtf_compat.S: Likewise. |
||
|
Joseph Myers
|
2dd0aec531 |
Add more thorough generated tgmath.h test.
This patch adds a more thorough test of tgmath.h macros, verifying both the return type and the function called for all the cases of valid argument types. (Cases with current problems - I've just filed four bugs - are disabled or omitted pending fixing those problems.) The test uses a Python generator (works with both Python 2 and 3) to generate a C file which is then built and run as a test in the usual way (and that C file includes its own dummy definitions of libm functions similar to existing tgmath.h tests). The motivation is to make it easier to add tests of tgmath.h for _Float128 when adding tgmath.h support for that type; the _FloatN / _FloatNx support is present in the script, but disabled until the tgmath.h support is written. Tested for x86_64, and for arm to check things in the long double = double case. (In that case, it's OK to call either double or long double functions when the selected type is double or long double, as long as the return type of the macro is exactly correct.) * math/gen-tgmath-tests.py: New file. * math/Makefile [PYTHON] (tests): Add test-tgmath3. [PYTHON] (generated): Add test-tgmath3.c. [PYTHON] (CFLAGS-test-tgmath3.c): New variable. [PYTHON] ($(objpfx)test-tgmath3.c): New rule. |
||
|
Gabriel F. T. Gomes
|
7620dc1235 |
Convert e_exp2l.c into a template
This patch converts the implementation of exp2l in math/e_exp2l.c into a template in math/e_exp2_template.c, then adjusts Makefile to use this template for long double (the implementations for float and double in sysdeps have higher precedence and are not used). This template can also be used for float128, thus reducing the amount of duplicated code that gets added when adding support the new type. Tested for powerpc64le and s390x. * math/Makefile (libm-calls): Move e_exp2F to gen-libm-calls. (gen-libm-calls): Add e_exp2F to use the template. * math/e_exp2l.c: Rename to math/e_exp2_template.c. * math/e_exp2_template.c: New file, renamed from math/e_exp2l.c, and made into a template. * sysdeps/generic/math-type-macros.h (M_MIN_EXP): New macro. |
||
Paul E. Murphy
|
fcee5905d3 |
float128: Add public _Float128 declarations to libm.
This introduces the machine-dependent bits/floatn.h to control the inclusion of _Float128 ABI. * bits/floatn.h: New file. * bits/huge_val_flt128.h: Likewise. * bits/libm-simd-decl-stubs.h (__DECL_SIMD_cosf128): New macro. (__DECL_SIMD_sinf128): Likewise. (__DECL_SIMD_sincosf128): Likewise. (__DECL_SIMD_logf128): Likewise. (__DECL_SIMD_expf128): Likewise. (__DECL_SIMD_powf128): Likewise. * math/Makefile (headers): Install bits/floatn.h and bits/huge_val_flt128.h. * math/bits/cmathcalls.h (_Mdouble_complex_): Only define if not defined. * math/bits/mathcalls.h (pow10, isinf, finite, drem, significand) (isnan, gamma, nexttoward, scalb): Only define if not __MATH_DECLARING_FLOATN. (nextdown, nextup, llogb, roundeven, fromfp, ufromfp, fromfpx) (ufromfpx, fmaxmag, fminmag, totalorder, totalordermag) (canonicalize, getpayload, setpayload, setpayloadsig): Declare for _FloatN even if __STDC_WANT_IEC_60559_BFP_EXT__ is not defined. * math/complex.h: Include bits/libc-header-start.h and bits/floatn.h. Include bits/cmathcalls.h to get the declarations of _Float128 versions of complex functions. [__HAVE_FLOAT128 && __GLIBC_USE (IEC_60559_TYPES_EXT)] (CMPLXF128): Define macro. * math/math.h: Include bits/floatn.h and bits/huge_val_flt128.h. Include bits/mathcalls-helper-functions.h and bits/mathcalls.h to get the declarations of _Float128 versions of math functions. (__MATH_DECLARING_FLOATN): New macro to control declaration of _FloatN types. [__GNUC_PREREQ (6,0)] (signbit): Since GCC 6.0, __builtin_signbit is type-generic, so use it without __MATH_TG. [__HAVE_DISTINCT_FLOAT128] (isinf): This builtin is broken for _Float128 type on GCC < 7.0. Explicitly call __isinff128 for _Float128 type and GCC < 7.0, otherwise use the builtin. [__HAVE_FLOAT128 && defined __USE_GNU] (M_Ef128, M_LOG2Ef128) (M_LOG10Ef128, M_LN2f128, M_LN10f128, M_PIf128, M_PI_2f128) (M_PI_4f128, M_1_PIf128, M_2_PIf128, M_SQRT2f128, M_SQRT1_2f128): New _GNU_SOURCE enabled macros. |
||
|
Paul E. Murphy
|
26265c3bce |
float128: Add _Float128 make bits to libm.
This adds the appropriate common bits for a platform to enable float128 and expose ABI. * math/Makefile: (type-float128-suffix): New variable (type-float128-routines): Likewise (type-float128-yes): Likewise (types): Append float128 if supported (types-basic): New variable to control the use of templates for float, double, and long double, but not for float128 or newer types. (type-basic-foreach): Likewise. * sysdeps/ieee754/float128/Makeconfig: New file. * sysdeps/ieee754/float128/Versions: New file. |
||
|
Gabriel F. T. Gomes
|
ff80ec4283 |
Split helper classification macros from mathcalls.h
The classification macros: finite, fpclassify, iseqsig, isinf, isnan, issignaling, and signbit are defined by ISO C11 and declared in mathcalls.h for each of the floating-point types: float, double, and long double. TS 18661-3 does not mention these macros for float128, however support for them must be present when _Float128 is present. This is true, even when the feature test macro __STDC_WANT_IEC_60559_TYPES_EXT__ is false. Other function declarations in mathcalls.h, on the other hand, depend on __STDC_WANT_IEC_60559_TYPES_EXT__. This patch splits the helper functions (__finite, __fpclassify, __iseqsig, __isinf, __isnan, __issignaling, and __signbit) from mathcalls.h, so that these helper functions can be declared for _Float128, even when __STDC_WANT_IEC_60559_TYPES_EXT__ is false. Tested for powerpc64le, s390x, and x86_64. * include/bits/mathcalls-helper-functions.h: New file. * math/Makefile (headers): Add bits/mathcalls-helper-functions.h. * math/bits/mathcalls.h (__finite, __fpclassify, __iseqsig) (__isinf, __isnan, __issignaling, __signbit): Move declarations to math/bits/mathcalls-helper-functions.h. * math/bits/mathcalls-helper-functions.h: New file. * math/math.h: Include bits/mathcalls-helper-functions.h for float, double, and long double. |
||
|
Joseph Myers
|
92061bb033 |
Run libm tests separately for each function.
At present, libm tests for each function get built into a single executable (for each floating point type, for each of normal / inline / finite-math-only functions, plus vector variants) and run together, resulting in a single PASS or FAIL (for each of those nine variants plus vector variants). Building this executable involves reading over 50 MB of libm-test-*.c sources. This patch arranges for tests of each function to be run separately from the makefiles instead. There are 121 functions being tested for each (type, variant pair) (actually 126, but run as 121 from the Makefile because each of the pairs (exp10, pow10), (isfinite, finite), (lgamma, gamma), (remainder, drem), (scalbn, ldexp), shares a table of test results and so is run together), so 1089 separate tests run from the Makefile, plus 48 vector tests on x86_64 (six functions for eight vector variants). Each test only involves a libm-test-<func>.c file of no more than about 4 MB, rather than all such files taking about 50 MB. With tests run separately, test summaries will indicate which functions actually have problems (of course, those problems may just be out-of-date libm-test-ulps files if the file hasn't been updated for the architecture in question recently). All the .c files for the 1089+48 tests are generated automatically from the Makefiles. Various checked-in boilerplate .c files are removed as no longer needed. CFLAGS definitions for the different kinds of tests are generated using makefile iterators to apply target-specific variable settings. libm-have-vector-test.h is no longer needed; the list of functions to test for each vector type is now in the sysdeps Makefile. This should reduce the amount of boilerplate needed for float128 testing support; test-float128.h will still be needed, but not various .c files or Makefile CFLAGS definitions. The logic for creating dependencies on libm-test-support-*.o files should also render <https://sourceware.org/ml/libc-alpha/2017-02/msg00279.html> unnecessary. Tested for x86_64 and x86. * math/Makefile (libm-tests-generated): Remove variable. (libm-tests-base-normal): New variable. (libm-tests-base-finite): Likewise. (libm-tests-base-inline): Likewise. (libm-tests-base): Likewise. (libm-tests-normal): Likewise. (libm-tests-finite): Likewise. (libm-tests-inline): Likewise. (libm-tests-vector): Likewise. (libm-tests): Define in terms of these new variables. (libm-tests-for-type): New variable. (libm-tests.o): Move definition. (tests): Move addition of $(libm-tests). (generated): Update for new and removed libm test files. ($(objpfx)libm-test.c): Remove target. ($(objpfx)libm-have-vector-test.h): Likewise. (CFLAGS-test-double-vlen2.c): Remove variable. (CFLAGS-test-double-vlen4.c): Likewise. (CFLAGS-test-double-vlen8.c): Likewise. (CFLAGS-test-float-vlen4.c): Likewise. (CFLAGS-test-float-vlen8.c): Likewise. (CFLAGS-test-float-vlen16.c): Likewise. (CFLAGS-test-float.c): Likewise. (CFLAGS-test-float-finite.c): Likewise. (CFLAGS-libm-test-support-float.c): Likewise. (CFLAGS-test-double.c): Likewise. (CFLAGS-test-double-finite.c): Likewise. (CFLAGS-libm-test-support-double.c): Likewise. (CFLAGS-test-ldouble.c): Likewise. (CFLAGS-test-ldouble-finite.c): Likewise. (CFLAGS-libm-test-support-ldouble.c): Likewise. (libm-test-inline-cflags): New variable. (CFLAGS-test-ifloat.c): Remove variable. (CFLAGS-test-idouble.c): Likewise. (CFLAGS-test-ildouble.c): Likewise. ($(addprefix $(objpfx), $(libm-tests.o))): Move target and update dependencies. ($(foreach t,$(libm-tests-normal),$(objpfx)$(t).c)): New rule. ($(foreach t,$(libm-tests-finite),$(objpfx)$(t).c)): Likewise. ($(foreach t,$(libm-tests-inline),$(objpfx)$(t).c)): Likewise. ($(foreach t,$(libm-tests-vector),$(objpfx)$(t).c)): Likewise. ($(foreach t,$(types),$(objpfx)libm-test-support-$(t).c)): Likewise. (dependencies on libm-test-support-*.o): Remove. ($(foreach f,$(libm-test-funcs-all),$(objpfx)$(o)-$(f).o)): New rules using iterators. ($(addprefix $(objpfx),$(call libm-tests-for-type,$(o)))): Likewise. ($(objpfx)libm-test-support-$(o).o): Likewise. ($(addprefix $(objpfx),$(filter-out $(tests-static) $(libm-vec-tests),$(tests)))): Filter out $(libm-tests-vector) instead. ($(addprefix $(objpfx), $(libm-vec-tests))): Use iterator to define rule instead. * math/README.libm-test: Update. * math/libm-test-acos.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-acosh.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-asin.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-asinh.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-atan.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-atan2.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-atanh.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-cabs.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-cacos.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-cacosh.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-canonicalize.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-carg.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-casin.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-casinh.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-catan.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-catanh.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-cbrt.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-ccos.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-ccosh.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-ceil.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-cexp.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-cimag.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-clog.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-clog10.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-conj.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-copysign.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-cos.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-cosh.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-cpow.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-cproj.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-creal.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-csin.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-csinh.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-csqrt.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-ctan.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-ctanh.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-erf.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-erfc.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-exp.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-exp10.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-exp2.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-expm1.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-fabs.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-fdim.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-floor.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-fma.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-fmax.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-fmaxmag.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-fmin.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-fminmag.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-fmod.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-fpclassify.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-frexp.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-fromfp.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-fromfpx.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-getpayload.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-hypot.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-ilogb.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-iscanonical.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-iseqsig.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-isfinite.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-isgreater.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-isgreaterequal.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-isinf.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-isless.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-islessequal.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-islessgreater.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-isnan.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-isnormal.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-issignaling.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-issubnormal.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-isunordered.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-iszero.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-j0.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-j1.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-jn.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-lgamma.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-llogb.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-llrint.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-llround.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-log.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-log10.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-log1p.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-log2.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-logb.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-lrint.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-lround.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-modf.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-nearbyint.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-nextafter.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-nextdown.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-nexttoward.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-nextup.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-pow.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-remainder.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-remquo.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-rint.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-round.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-roundeven.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-scalb.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-scalbln.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-scalbn.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-setpayload.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-setpayloadsig.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-signbit.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-significand.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-sin.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-sincos.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-sinh.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-sqrt.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-tan.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-tanh.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-tgamma.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-totalorder.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-totalordermag.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-trunc.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-ufromfp.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-ufromfpx.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-y0.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-y1.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-yn.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-driver.c: Do not include libm-have-vector-test.h. (HAVE_VECTOR): Remove macro. (START): Do not call HAVE_VECTOR. * math/test-double-vlen2.h (FUNC_TEST): Remove macro. * math/test-double-vlen4.h (FUNC_TEST): Remove macro. * math/test-double-vlen8.h (FUNC_TEST): Remove macro. * math/test-float-vlen16.h (FUNC_TEST): Remove macro. * math/test-float-vlen4.h (FUNC_TEST): Remove macro. * math/test-float-vlen8.h (FUNC_TEST): Remove macro. * math/test-math-vector.h (FUNC_TEST): New macro. (WRAPPER_DECL): Rename to WRAPPER_DECL_f. * sysdeps/x86_64/fpu/Makefile (double-vlen2-funcs): New variable. (double-vlen4-funcs): Likewise. (double-vlen4-avx2-funcs): Likewise. (double-vlen8-funcs): Likewise. (float-vlen4-funcs): Likewise. (float-vlen8-funcs): Likewise. (float-vlen8-avx2-funcs): Likewise. (float-vlen16-funcs): Likewise. (CFLAGS-test-double-vlen4-avx2.c): Remove variable. (CFLAGS-test-float-vlen8-avx2.c): Likewise. * sysdeps/x86_64/fpu/test-double-vlen4.h (TEST_VECTOR_cos): Remove macro. (TEST_VECTOR_sin): Likewise. (TEST_VECTOR_sincos): Likewise. (TEST_VECTOR_log): Likewise. (TEST_VECTOR_exp): Likewise. (TEST_VECTOR_pow): Likewise. * sysdeps/x86_64/fpu/test-double-vlen8.h (TEST_VECTOR_cos): Likewise. (TEST_VECTOR_sin): Likewise. (TEST_VECTOR_sincos): Likewise. (TEST_VECTOR_log): Likewise. (TEST_VECTOR_exp): Likewise. (TEST_VECTOR_pow): Likewise. * sysdeps/x86_64/fpu/test-float-vlen16.h (TEST_VECTOR_cosf): Likewise. (TEST_VECTOR_sinf): Likewise. (TEST_VECTOR_sincosf): Likewise. (TEST_VECTOR_logf): Likewise. (TEST_VECTOR_expf): Likewise. (TEST_VECTOR_powf): Likewise. * sysdeps/x86_64/fpu/test-float-vlen8.h (TEST_VECTOR_cosf): Likewise. (TEST_VECTOR_sinf): Likewise. (TEST_VECTOR_sincosf): Likewise. (TEST_VECTOR_logf): Likewise. (TEST_VECTOR_expf): Likewise. (TEST_VECTOR_powf): Likewise. * math/gen-libm-have-vector-test.sh: Remove file. * math/libm-test.inc: Likewise. * math/libm-test-support-double.c: Likewise. * math/libm-test-support-float.c: Likewise. * math/libm-test-support-ldouble.c: Likewise. * math/test-double-finite.c: Likewise.: Likewise. * math/test-double.c: Likewise. * math/test-float-finite.c: Likewise. * math/test-float.c: Likewise. * math/test-idouble.c: Likewise. * math/test-ifloat.c: Likewise. * math/test-ildouble.c: Likewise. * math/test-ldouble-finite.c: Likewise. * math/test-ldouble.c: Likewise. * sysdeps/x86_64/fpu/test-double-vlen2.c: Likewise. * sysdeps/x86_64/fpu/test-double-vlen2.h: Likewise. * sysdeps/x86_64/fpu/test-double-vlen4-avx2.c: Likewise. * sysdeps/x86_64/fpu/test-double-vlen4.c: Likewise. * sysdeps/x86_64/fpu/test-double-vlen8.c: Likewise. * sysdeps/x86_64/fpu/test-float-vlen16.c: Likewise. * sysdeps/x86_64/fpu/test-float-vlen4.c: Likewise. * sysdeps/x86_64/fpu/test-float-vlen4.h: Likewise. * sysdeps/x86_64/fpu/test-float-vlen8-avx2.c: Likewise. * sysdeps/x86_64/fpu/test-float-vlen8.c: Likewise. |
||
|
Gabriel F. T. Gomes
|
aec0821ce7 |
Add new templates for IEEE wrappers
Several wrappers for IEEE functions use _LIB_VERSION / matherr / __kernel_standard functionality, which we want to obsolete. New wrappers, such as for float128, must not use this functionality. This patch adds new wrappers that only __set_errno and can be used by the new float128 wrappers. Tested for powerpc64le. * math/Makefile: Add wrappers to gen-libm-calls. * math/w_acos_template.c: New file. * math/w_acosh_template.c: Likewise. * math/w_asin_template.c: Likewise. * math/w_atan2_template.c: Likewise. * math/w_atanh_template.c: Likewise. * math/w_cosh_template.c: Likewise. * math/w_exp10_template.c: Likewise. * math/w_exp2_template.c: Likewise. * math/w_exp_template.c: Likewise. * math/w_fmod_template.c: Likewise. * math/w_hypot_template.c: Likewise. * math/w_j0_template.c: Likewise. * math/w_j1_template.c: Likewise. * math/w_jn_template.c: Likewise. * math/w_lgamma_r_template.c: Likewise. * math/w_lgamma_template.c: Likewise. * math/w_log10_template.c: Likewise. * math/w_log2_template.c: Likewise. * math/w_log_template.c: Likewise. * math/w_pow_template.c: Likewise. * math/w_remainder_template.c: Likewise. * math/w_sinh_template.c: Likewise. * math/w_sqrt_template.c: Likewise. * math/w_tgamma_template.c: Likewise.: Likewise. * sysdeps/generic/math-type-macros-double.h (__USE_WRAPPER_TEMPLATE): New macro to control inclusion of the new wrappers. * sysdeps/generic/math-type-macros-float.h: Likewise. * sysdeps/generic/math-type-macros-ldouble.h: Likewise. |
||
|
Joseph Myers
|
2c51dfd05d |
Move tests of catan, catanh to auto-libm-test-*.
This patch moves tests of catan and catanh with finite inputs (other than the divide-by-zero cases producing an exact infinity) to using the auto-libm-test machinery. Each of auto-libm-test-out-catan and auto-libm-test-out-catanh takes about three seconds to generate on my system (so in fact it wasn't necessary after all to defer the move to auto-libm-test-* until the output files were split up by function). Tested for x86_64 and x86 and ulps updated accordingly. * math/auto-libm-test-in: Add tests of catan and catanh. * math/auto-libm-test-out-catan: New generated file. * math/auto-libm-test-out-catanh: Likewise. * math/libm-test-catan.inc (catan_test_data): Use AUTO_TESTS_c_c. Move tests with finite inputs, except divide-by-zero cases, to auto-libm-test-in. * math/libm-test-catanh.inc (catanh_test_data): Likewise. * math/Makefile (libm-test-funcs-auto): Add catan and catanh. (libm-test-funcs-noauto): Remove catan and catanh. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise. |