The merge of the latest gettext code introduced changes to the yacc
parser source that are incompatible with versions of bison older
than 2.7. Add a configure check for the appropriate versions and
document the requirement in INSTALL.
ChangeLog:
2014-12-22 Will Newton <will.newton@linaro.org>
* manual/install.texi: Document that we require bison 2.7
or above.
* INSTALL: Regenerate.
* configure.ac: Use AC_CHECK_PROG_VER instead of
AC_PATH_PROG when checking for bison and check for
version 2.7 or above.
* configure: Regenerate.
It seems we require texinfo 4.7 for the --plaintext option, so
document that and check for the correct version in configure.
ChangeLog:
2014-12-15 Will Newton <will.newton@linaro.org>
* manual/install.texi: Bump required version of texinfo
to 4.7 from 4.5.
* INSTALL: Regenerated.
* configure.ac: Check for makeinfo version 4.7 and above.
* configure: Regenerated.
As discussed starting at
<https://sourceware.org/ml/libc-alpha/2014-11/msg00323.html>, this
patch makes the glibc build use -Werror by default to avoid
accidentally adding new warnings to the build. The configure option
--disable-werror can be used to disable this.
-Wno-error=undef is temporarily used because the build isn't clean
regarding -Wundef warnings. The idea is that once the remaining
-Wundef warnings have been cleaned up (in at least one configuration),
-Wno-error=undef will be removed.
I get a clean build and test on x86_64 (GCC 4.9 branch) with this
patch. The expectation is that this may well break the build for some
other configurations, and people seeing such breakage should make
appropriate fixes to fix or suppress the warnings for their
configurations. In some cases that may involve using pragmas as the
right fix (I think that will be right for the -Wno-inline issue for
MIPS I referred to in
<https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, for
example), in some cases -Wno-error in sysdeps makefiles (__restore_rt
in MIPS sigaction, for example), in some cases substantive fixes for
the warnings.
Note that if, with a view to listing all the warnings then fixing them
all, you just look for "warning:" in output from building and testing
with --disable-werror, you'll see lots of warnings from the linker
about functions such as tmpnam. Those warnings can be ignored - only
compiler warnings are relevant to -Werror, not linker warnings.
* configure.ac (--disable-werror): New configure option.
(enable_werror): New AC_SUBST.
* configure: Regenerated.
* config.make.in (enable-werror): New variable.
* Makeconfig [$(enable-werror) = yes] (+gccwarn): Add -Werror
-Wno-error=undef.
(+gccwarn-c): Do not use -Werror=implicit-function-declaration.
* manual/install.texi (Configuring and compiling): Document
--disable-werror.
* INSTALL: Regenerated.
* debug/Makefile (CFLAGS-tst-chk1.c): Add -Wno-error.
(CFLAGS-tst-chk2.c): Likewise.
(CFLAGS-tst-chk3.c): Likewise.
(CFLAGS-tst-chk4.cc): Likewise.
(CFLAGS-tst-chk5.cc): Likewise.
(CFLAGS-tst-chk6.cc): Likewise.
(CFLAGS-tst-lfschk1.c): Likewise.
(CFLAGS-tst-lfschk2.c): Likewise.
(CFLAGS-tst-lfschk3.c): Likewise.
(CFLAGS-tst-lfschk4.cc): Likewise.
(CFLAGS-tst-lfschk5.cc): Likewise.
(CFLAGS-tst-lfschk6.cc): Likewise.
As discussed in the thread starting at
<https://sourceware.org/ml/libc-alpha/2014-10/msg00792.html>, and
continuing into November, this patch increases the minimum GCC version
for building glibc to 4.6 (there seemed to be no clear consensus for
4.7). In particular, this allows us to use #pragma GCC diagnostic for
fine-grained warning control with -Werror (subject to establishing a
suitable policy for that use). The documentation has a statement, as
requested, about the most recent GCC version tested for building
glibc, and I've updated <https://sourceware.org/glibc/wiki/Release> to
refer to updating that statement. A NEWS entry is added for this
change, although previous such changes didn't get them.
Tested for x86_64 (testsuite, and that installed shared libraries are
unchanged by this patch).
* configure.ac (libc_cv_compiler_ok): Require GCC 4.6 or later.
* configure: Regenerated.
* manual/install.texi (Tools for Compilation): Document a
requirement of GCC 4.6 or later and that GCC 4.9 is the newest
compiler verified to work.
* INSTALL: Regenerated.
I noticed that install.texi was out of date with regard to the actual
autoconf version requirement for regenerating configure scripts. This
patch updates the documentation.
* manual/install.texi (Tools for Compilation): Update autoconf
version requirements.
* INSTALL: Regenerated.
Various glibc build / install / test code has C locale settings that
are redundant with LC_ALL=C.
LC_ALL takes precedence over LANG, so anywhere that sets LC_ALL=C
(explicitly, or through it being in the default environment for
running tests) does not need to set LANG=C. LC_ALL=C also takes
precedence over LANGUAGE, since
2001-01-02 Ulrich Drepper <drepper@redhat.com>
* intl/dcigettext.c (guess_category_value): Rewrite so that LANGUAGE
value is ignored if the selected locale is the C locale.
* intl/tst-gettext.c: Set locale for above change.
* intl/tst-translit.c: Likewise.
and so settings of LANGUAGE=C are also redundant when LC_ALL=C is
set. One test also had LC_ALL=C in its -ENV setting, although it's
part of the default environment used for tests.
This patch removes the redundant settings. It removes a suggestion in
install.texi of setting LANGUAGE=C LC_ALL=C for "make install"; the
Makefile.in target "install" already sets LC_ALL_C so there's no need
for the user to set it (and nor should there be any need for the user
to set it).
If some build machine tool used by "make install" uses a version of
libintl predating that 2001 change, and the user has LANGUAGE set, the
removal of LANGUAGE=C from the Makefile.in "install" rule could in
principle affect the user's installation. However, I don't think we
need to be concerned about pre-2001 build tools.
Tested x86_64.
* Makefile (install): Don't set LANGUAGE.
* Makefile.in (install): Likewise.
* assert/Makefile (test-assert-ENV): Remove variable.
(test-assert-perr-ENV): Likewise.
* elf/Makefile (neededtest4-ENV): Likewise.
* iconvdata/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Don't set LANGUAGE.
* io/ftwtest-sh (LANG): Remove variable.
* libio/Makefile (tst-widetext-ENV): Likewise.
* manual/install.texi (Running make install): Don't refer to
environment settings for make install.
* INSTALL: Regenerated.
* nptl/tst-tls6.sh: Don't set LANG.
* posix/globtest.sh (LANG): Remove variable.
* string/Makefile (tester-ENV): Likewise.
(inl-tester-ENV): Likewise.
(noinl-tester-ENV): Likewise.
* sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Don't set LANGUAGE.
* timezone/Makefile (build-testdata): Use $(built-program-cmd)
without explicit environment settings.
localedata/ChangeLog:
* tst-fmon.sh: Don't set LANGUAGE.
* tst-locale.sh: Likewise.
One wart in the original support for test wrappers for cross testing,
as noted in
<https://sourceware.org/ml/libc-alpha/2012-10/msg00722.html>, is the
requirement for test wrappers to pass a poorly-defined set of
environment variables from the build system to the system running the
glibc under test. Although some variables are passed explicitly via
$(test-wrapper-env), including LD_* variables that simply can't be
passed implicitly because of the side effects they'd have on the build
system's dynamic linker, others are passed implicitly, including
variables such as GCONV_PATH and LOCPATH that could potentially affect
the build system's libc (so effectively relying on any such effects
not breaking the wrappers). In addition, the code in
cross-test-ssh.sh for preserving environment variables is fragile (it
depends on how bash formats a list of exported variables, and could
well break for multi-line variable definitions where the contents
contain things looking like other variable definitions).
This patch moves to explicitly passing environment variables via
$(test-wrapper-env). Makefile variables that previously used
$(test-wrapper) are split up into -before-env and -after-env parts
that can be passed separately to the various .sh files used in
testing, so those files can then insert environment settings between
the two parts.
The common default environment settings in make-test-out are made into
a separate makefile variable that can also be passed to scripts,
rather than many scripts duplicating those settings (for testing an
installed glibc, it is desirable to have the GCONV_PATH setting on
just one place, so just that one place needs to support it pointing to
an installed sysroot instead of the build tree). The default settings
are included in the variables such as $(test-program-prefix), so that
if tests do not need any non-default settings they can continue to use
single variables rather than the split-up variables.
Although this patch cleans up LC_ALL=C settings (that being part of
the common defaults), various LANG=C and LANGUAGE=C settings remain.
Those are generally unnecessary and I propose a subsequent cleanup to
remove them. LC_ALL takes precedence over LANG, and while LANGUAGE
takes precedence over LC_ALL, it only does so for settings other than
LC_ALL=C. So LC_ALL=C on its own is sufficient to ensure the C
locale, and anything that gets LC_ALL=C does not need the other
settings.
While preparing this patch I noticed some tests with .sh files that
appeared to do nothing beyond what the generic makefile support for
tests can do (localedata/tst-wctype.sh - the makefiles support -ENV
variables and .input files - and localedata/tst-mbswcs.sh - just runs
five tests that could be run individually from the makefile). So I
propose another subsequent cleanup to move those to using the generic
support instead of special .sh files.
Tested x86_64 (native) and powerpc32 (cross).
* Makeconfig (run-program-env): New variable.
(run-program-prefix-before-env): Likewise.
(run-program-prefix-after-env): Likewise.
(run-program-prefix): Define in terms of new variables.
(built-program-cmd-before-env): New variable.
(built-program-cmd-after-env): Likewise.
(built-program-cmd): Define in terms of new variables.
(test-program-prefix-before-env): New variable.
(test-program-prefix-after-env): Likewise.
(test-program-prefix): Define in terms of new variables.
(test-program-cmd-before-env): New variable.
(test-program-cmd-after-env): Likewise.
(test-program-cmd): Define in terms of new variables.
* Rules (make-test-out): Use $(run-program-env).
* scripts/cross-test-ssh.sh (env_blacklist): Remove variable.
(help): Do not mention environment variables. Mention
--timeoutfactor option.
(timeoutfactor): New variable.
(blacklist_exports): Remove function.
(exports): Remove variable.
(command): Do not include ${exports}.
* manual/install.texi (Configuring and compiling): Do not mention
test wrappers preserving environment variables. Mention that last
assignment to a variable must take precedence.
* INSTALL: Regenerated.
* benchtests/Makefile (run-bench): Use $(run-program-env).
* catgets/Makefile ($(objpfx)test1.cat): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
($(objpfx)test2.cat): Do not specify environment variables
explicitly.
($(objpfx)de/libc.cat): Use $(built-program-cmd-before-env),
$(run-program-env) and $(built-program-cmd-after-env).
($(objpfx)test-gencat.out): Use $(test-program-cmd-before-env),
$(run-program-env) and $(test-program-cmd-after-env).
($(objpfx)sample.SJIS.cat): Do not specify environment variables
explicitly.
* catgets/test-gencat.sh: Use test_program_cmd_before_env,
run_program_env and test_program_cmd_after_env arguments.
* elf/Makefile ($(objpfx)tst-pathopt.out): Use $(run-program-env).
* elf/tst-pathopt.sh: Use run_program_env argument.
* iconvdata/Makefile ($(objpfx)iconv-test.out): Use
$(test-wrapper-env) and $(run-program-env).
* iconvdata/run-iconv-test.sh: Use test_wrapper_env and
run_program_env arguments.
* iconvdata/tst-table.sh: Do not set GCONV_PATH explicitly.
* intl/Makefile ($(objpfx)tst-gettext.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
($(objpfx)tst-gettext2.out): Likewise.
* intl/tst-gettext.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* intl/tst-gettext2.sh: Likewise.
* intl/tst-gettext4.sh: Do not set environment variables
explicitly.
* intl/tst-gettext6.sh: Likewise.
* intl/tst-translit.sh: Likewise.
* malloc/Makefile ($(objpfx)tst-mtrace.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* malloc/tst-mtrace.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* math/Makefile (run-regen-ulps): Use $(run-program-env).
* nptl/Makefile ($(objpfx)tst-tls6.out): Use $(run-program-env).
* nptl/tst-tls6.sh: Use run_program_env argument. Set LANG=C
explicitly with each use of ${test_wrapper_env}.
* posix/Makefile ($(objpfx)wordexp-tst.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* posix/tst-getconf.sh: Do not set environment variables
explicitly.
* posix/wordexp-tst.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* stdio-common/tst-printf.sh: Do not set environment variables
explicitly.
* stdlib/Makefile ($(objpfx)tst-fmtmsg.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* stdlib/tst-fmtmsg.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
Split $test calls into $test_pre and $test.
* timezone/Makefile (build-testdata): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
localedata/ChangeLog:
* Makefile ($(addprefix $(objpfx),$(CTYPE_FILES))): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
($(objpfx)sort-test.out): Use $(test-program-prefix-before-env),
$(run-program-env) and $(test-program-prefix-after-env).
($(objpfx)tst-fmon.out): Use $(run-program-prefix-before-env),
$(run-program-env) and $(run-program-prefix-after-env).
($(objpfx)tst-locale.out): Use $(built-program-cmd-before-env),
$(run-program-env) and $(built-program-cmd-after-env).
($(objpfx)tst-trans.out): Use $(run-program-prefix-before-env),
$(run-program-env), $(run-program-prefix-after-env),
$(test-program-prefix-before-env) and
$(test-program-prefix-after-env).
($(objpfx)tst-ctype.out): Use $(test-program-cmd-before-env),
$(run-program-env) and $(test-program-cmd-after-env).
($(objpfx)tst-wctype.out): Likewise.
($(objpfx)tst-langinfo.out): Likewise.
($(objpfx)tst-langinfo-static.out): Likewise.
* gen-locale.sh: Use localedef_before_env, run_program_env and
localedef_after_env arguments.
* sort-test.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* tst-ctype.sh: Use tst_ctype_before_env, run_program_env and
tst_ctype_after_env arguments.
* tst-fmon.sh: Use run_program_prefix_before_env, run_program_env
and run_program_prefix_after_env arguments.
* tst-langinfo.sh: Use tst_langinfo_before_env, run_program_env
and tst_langinfo_after_env arguments.
* tst-locale.sh: Use localedef_before_env, run_program_env and
localedef_after_env arguments.
* tst-mbswcs.sh: Do not set environment variables explicitly.
* tst-numeric.sh: Likewise.
* tst-rpmatch.sh: Likewise.
* tst-trans.sh: Use run_program_prefix_before_env,
run_program_env, run_program_prefix_after_env,
test_program_prefix_before_env and test_program_prefix_after_env
arguments.
* tst-wctype.sh: Use tst_wctype_before_env, run_program_env and
tst_wctype_after_env arguments.
This patch increases the minimum Linux kernel version for glibc to
2.6.32, as discussed in the thread starting at
<https://sourceware.org/ml/libc-alpha/2014-01/msg00511.html>.
This patch just does the minimal change to arch_minimum_kernel
settings (and LIBC_LINUX_VERSION, which determines the minimum kernel
headers version, as it doesn't make sense for that to be older than
the minimum kernel that can be used at runtime). Followups would be
expected to do, roughly and not necessarily precisely in this order:
* Remove __LINUX_KERNEL_VERSION checks in kernel-features.h files
where those checks are always true / always false for kernels 2.6.32
and above.
* Otherwise simplify/improve conditionals in those files (for example,
where defining once in the main file then undefining in
architecture-specific files makes things clearer than having lots of
separate definitions of the same macro), possibly fixing in the
process cases where a macro should optimally have been defined for a
given architecture but wasn't. (In the review in preparation for
this version increase I checked what the right conditions should be
for all macros in the main kernel-features.h whose definitions there
would have been affected by the increase - but I only fixed that
subset of the issues found where --enable-kernel=2.6.32 would have
caused a kernel feature to be wrongly assumed to be present, not any
cases where a feature is not assumed but could be assumed.)
* Remove conditionals on __ASSUME_* where they can now be taken to be
always-true, and the definitions when the macros are only used in
Linux-specific files.
* Split more architectures out of the main kernel-features.h (like
ex-ports architectures), once various of the architecture
conditionals there have been eliminated so the new
architecture-specific files are no larger than actually necessary.
Tested x86_64.
2014-03-27 Joseph Myers <joseph@codesourcery.com>
[BZ #9894]
* sysdeps/unix/sysv/linux/configure.ac (LIBC_LINUX_VERSION):
Change to 2.6.32.
(arch_minimum_kernel): Change all 2.6.16 settings to 2.6.32.
* sysdeps/unix/sysv/linux/configure: Regenerated.
* sysdeps/unix/sysv/linux/microblaze/configure.ac: Remove file.
* sysdeps/unix/sysv/linux/microblaze/configure: Likewise.
* sysdeps/unix/sysv/linux/tile/configure.ac: Likewise.
* sysdeps/unix/sysv/linux/tile/configure: Likewise.
* README: Update reference to required Linux kernel version.
* manual/install.texi (Linux): Update reference to required Linux
kernel headers version.
* INSTALL: Regenerated.
This patch is an updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00198.html> and
<https://sourceware.org/ml/libc-alpha/2014-03/msg00180.html>.
Normal practice for software testsuites is that rather than
terminating immediately when a test fails, they continue running and
report at the end on how many tests passed or failed.
The principle behind the glibc testsuite stopping on failure was
probably that the expected state is no failures and so any failure
indicates a problem such as miscompilation. In practice, while this
is fairly close to true for native testing on x86_64 and x86 (kernel
bugs and race conditions can still cause intermittent failures), it's
less likely to be the case on other platforms, and so people testing
glibc run the testsuite with "make -k" and then examine the logs to
determine whether the failures are what they expect to fail on that
platform, possibly with some automation for the comparison.
This patch switches the glibc testsuite to the normal convention of
not stopping on failure - unless you use stop-on-test-failure=y, in
which case it behaves essentially as it did before (and does not
generate overall test summaries on failure). Instead, the summary
tests.sum may contain tests that FAILed. At the end of the test run,
any FAIL or ERROR lines from tests.sum are printed, and then it exits
with error status if there were any such lines. In addition, build
failures will also cause the test run to stop - this has the
justification that those *do* indicate serious problems that should be
promptly fixed and aren't generally hard to fix (but apart from that,
avoiding the build stopping on those failures seems harder).
Note that unlike the previous patches in this series, this *does*
require people with automation around testing glibc to change their
processes - either to start using tests.sum / xtests.sum to track
failures and compare them with expectations (with or without also
using "make -k" and examining "make" logs to identify build failures),
or else to use stop-on-test-failure=y and ignore the new tests.sum /
xtests.sum mechanism. (If all you check is the exit status from "make
check", no changes are needed unless you want to avoid test runs
continuing after the first failure.)
Tested x86_64.
* scripts/evaluate-test.sh: Handle fourth argument to determine
whether test run should stop on failure.
* Makeconfig (stop-on-test-failure): New variable.
(evaluate-test): Pass fourth argument to evaluate-test.sh based on
$(stop-on-test-failure).
* Makefile (tests): Give a summary of results from testing and
exit with failure status if they include an ERROR or FAIL.
(xtests): Likewise.
* manual/install.texi (Configuring and compiling): Mention
stop-on-test-failure=y.
* INSTALL: Regenerated.
The commit d136c6dc resulted in menu text for the "Top" node being added
to the INSTALL file on regeneration. As the full menu is not displayed
in the plain text file anyway, suppress the menu section completely to
avoid the additional text.
Also regenerate the INSTALL file to commit a small formatting change
introduced in the same commit.
Autoconf has been deprecating configure.in for quite a long time.
Rename all our configure.in and preconfigure.in files to .ac.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The pt-chown binary is discussed in the "Running make install" section
without clarification of the needed configure option. Clarify this
and simplfy the discription which is already covered in the "Configuring
and compiling" section.
The helper binary pt_chown tricked into granting access to another
user's pseudo-terminal.
Pre-conditions for the attack:
* Attacker with local user account
* Kernel with FUSE support
* "user_allow_other" in /etc/fuse.conf
* Victim with allocated slave in /dev/pts
Using the setuid installed pt_chown and a weak check on whether a file
descriptor is a tty, an attacker could fake a pty check using FUSE and
trick pt_chown to grant ownership of a pty descriptor that the current
user does not own. It cannot access /dev/pts/ptmx however.
In most modern distributions pt_chown is not needed because devpts
is enabled by default. The fix for this CVE is to disable building
and using pt_chown by default. We still provide a configure option
to enable hte use of pt_chown but distributions do so at their own
risk.
[BZ #13750]
Do not build manual anymore in the source dir. Also clean up the
Makefile and remove rules that have been used previously
when we had a stand-alone Makefile which was obsoleted recently.
We use sourceware.org consistently to reference the
server that RedHat provides for community services
to open-source projects.
[BZ # 13963]
* manual/install.texi: Use sourceware.org.
2003-01-14 Ulrich Drepper <drepper@redhat.com>
* manual/install.texi: Correct description of header preparation for
Linux build. Patch by mhwood@Ameritech.Net [PR libc/4941].
* configure: Regenerated.
* manual/install.texi (Tools for Compilation): Say 3.2 is required.
(Configuring and compiling): Don't mention older GCC versions any more.
* INSTALL: Regenerated.
* manual/install.texi (Configuring and compiling, Installation,
Running make install, Linux): Linux -> GNU/Linux where appropriate.
* elf/rtld.c (_dl_start_final): Move defn before _dl_start so it can
be inlined. Declare it with always_inline if [DONT_USE_BOOTSTRAP_MAP]
and with noinline otherwise. Remove hack alloca use to prevent
inlining, we can ask for it explicitly nowadays.
2001-05-25 Bruce Mitchener <bruce@cubik.org>
* manual/ctype.texi: Minor fix.
* manual/install.texi: Likewise.
* manual/startup.texi: Likewise.
* manual/examples/dir.c: Use perror() rather than puts().
2001-05-25 David Mosberger <davidm@hpl.hp.com>
* sysdeps/unix/sysv/linux/ia64/bits/sigcontext.h: Put stuff following
#endif directive inside a comment to avoid compiler warnings.
2001-05-25 Philipp Thomas <pthomas@suse.de>
* nis/nis_print.c (nis_nstype2str): Don't mark names of
naming services for translation, only UNKNOWN needs it.
Add comment to prevent it for the future.
2001-05-25 Joseph S. Myers <jsm28@cam.ac.uk>
* misc/sys/cdefs.h (__restrict_arr): Define appropriately for GCC
3.1 and non-GCC C99 compilers.
Patch by "Hasbullah Pit (sebol)" <sebol@ikhlas.com>.
2001-05-14 Andreas Jaeger <aj@suse.de>
* locales/ms_MY: Fix entries for Tue and Wednesday.
Patch by "Hasbullah Pit (sebol)" <sebol@ikhlas.com>.
2001-04-08 Hans-Peter Nilsson <hp@axis.com>
* sysdeps/unix/sysv/linux/cris/Dist: New file.
* sysdeps/unix/sysv/linux/cris/Makefile: New file.
* sysdeps/unix/sysv/linux/cris/_G_config.h: New file.
* sysdeps/unix/sysv/linux/cris/bits/fcntl.h: New file.
* sysdeps/unix/sysv/linux/cris/bits/mman.h: New file.
* sysdeps/unix/sysv/linux/cris/bits/resource.h: New file.
* sysdeps/unix/sysv/linux/cris/brk.c: New file.
* sysdeps/unix/sysv/linux/cris/chown.c: New file.
* sysdeps/unix/sysv/linux/cris/clone.S: New file.
* sysdeps/unix/sysv/linux/cris/fchown.c: New file.
* sysdeps/unix/sysv/linux/cris/fcntl.c: New file.
* sysdeps/unix/sysv/linux/cris/fxstat.c: New file.
* sysdeps/unix/sysv/linux/cris/getegid.c: New file.
* sysdeps/unix/sysv/linux/cris/geteuid.c: New file.
* sysdeps/unix/sysv/linux/cris/getgid.c: New file.
* sysdeps/unix/sysv/linux/cris/getgroups.c: New file.
* sysdeps/unix/sysv/linux/cris/getresgid.c: New file.
* sysdeps/unix/sysv/linux/cris/getresuid.c: New file.
* sysdeps/unix/sysv/linux/cris/getrlimit.c: New file.
* sysdeps/unix/sysv/linux/cris/getrlimit64.c: New file.
* sysdeps/unix/sysv/linux/cris/getuid.c: New file.
* sysdeps/unix/sysv/linux/cris/lchown.c: New file.
* sysdeps/unix/sysv/linux/cris/lockf64.c: New file.
* sysdeps/unix/sysv/linux/cris/lxstat.c: New file.
* sysdeps/unix/sysv/linux/cris/mmap.S: New file.
* sysdeps/unix/sysv/linux/cris/mmap64.S: New file.
* sysdeps/unix/sysv/linux/cris/msgctl.c: New file.
* sysdeps/unix/sysv/linux/cris/profil-counter.h: New file.
* sysdeps/unix/sysv/linux/cris/register-dump.h: New file.
* sysdeps/unix/sysv/linux/cris/semctl.c: New file.
* sysdeps/unix/sysv/linux/cris/setegid.c: New file.
* sysdeps/unix/sysv/linux/cris/seteuid.c: New file.
* sysdeps/unix/sysv/linux/cris/setfsgid.c: New file.
* sysdeps/unix/sysv/linux/cris/setfsuid.c: New file.
* sysdeps/unix/sysv/linux/cris/setgid.c: New file.
* sysdeps/unix/sysv/linux/cris/setgroups.c: New file.
* sysdeps/unix/sysv/linux/cris/setregid.c: New file.
* sysdeps/unix/sysv/linux/cris/setresgid.c: New file.
* sysdeps/unix/sysv/linux/cris/setresuid.c: New file.
* sysdeps/unix/sysv/linux/cris/setreuid.c: New file.
* sysdeps/unix/sysv/linux/cris/setrlimit.c: New file.
* sysdeps/unix/sysv/linux/cris/setuid.c: New file.
* sysdeps/unix/sysv/linux/cris/shmctl.c: New file.
* sysdeps/unix/sysv/linux/cris/socket.S: New file.
* sysdeps/unix/sysv/linux/cris/sys/ucontext.h: New file.
* sysdeps/unix/sysv/linux/cris/syscall.S: New file.
* sysdeps/unix/sysv/linux/cris/sysdep.S: New file.
* sysdeps/unix/sysv/linux/cris/sysdep.h: New file.
* sysdeps/unix/sysv/linux/cris/vfork.S: New file.
* sysdeps/unix/sysv/linux/cris/xstat.c: New file.
2001-04-08 Hans-Peter Nilsson <hp@axis.com>
* sysdeps/cris/Dist: New file.
* sysdeps/cris/Implies: New file.
* sysdeps/cris/Makefile: New file.
* sysdeps/cris/__longjmp.S: New file.
* sysdeps/cris/_mcount.S: New file.
* sysdeps/cris/bits/endian.h: New file.
* sysdeps/cris/bits/setjmp.h: New file.
* sysdeps/cris/bits/string.h: New file.
* sysdeps/cris/dl-machine.h: New file.
* sysdeps/cris/elf/start.S: New file.
* sysdeps/cris/machine-gmon.h: New file.
* sysdeps/cris/memcopy.h: New file.
* sysdeps/cris/memusage.h: New file.
* sysdeps/cris/setjmp.S: New file.
* sysdeps/cris/sysdep.h: New file.
* sysdeps/cris/wordcopy.c: New file.
2001-04-08 Hans-Peter Nilsson <hp@axis.com>
* elf/elf.h: Add new relocations for CRIS.
2001-04-08 Hans-Peter Nilsson <hp@axis.com>
* shlib-versions: Add cases for Linux on CRIS.
2001-04-08 Hans-Peter Nilsson <hp@axis.com>
* configure.in (ASM_LINE_SEP tests): Handle CRIS assembly, with
';' for comments and '@' for line separator.
2001-04-08 Hans-Peter Nilsson <hp@axis.com>
* sysdeps/unix/sysv/linux/hppa/sysdep.h (INLINE_SYSCALL): Fix
typo; s/==/=/ for assignment.
2001-04-08 Hans-Peter Nilsson <hp@axis.com>
* malloc/Makefile: Correct comment; mtrace is Perl, not AWK.
2001-04-08 Hans-Peter Nilsson <hp@axis.com>
* iconv/gconv_simple.c (internal_ucs4_loop_unaligned): Check for
empty input before checking full output.
2001-04-08 Hans-Peter Nilsson <hp@axis.com>
* iconv/gconv.c (__gconv): Don't derefer parameter cd before
checking if == -1L.
2001-04-08 Ulrich Drepper <drepper@redhat.com>
* inet/rexec.c (rexec_af): Avoid calling perror with errno being set.
2000-08-09 Andreas Jaeger <aj@suse.de>
* configure.in: Change required make versions.
* manual/install.texi (Tools for Compilation): Document required
make version.
(Supported Configurations): Update list of supported
configurations.
* crypt/md5-crypt.c (__md5_crypt_r): Clear arrays the key and salt
string got copied in.
Patch by Solar Designer <solar@false.com>.
2000-07-05 Andreas Jaeger <aj@suse.de>
* manual/install.texi (Installation): Update information about
add-ons.
(Configuring and compiling): Update for glibc 2.2.
2000-07-04 Andreas Jaeger <aj@suse.de>
* sysdeps/i386/fpu_control.h (_FPU_DEFAULT): Correct value.
(_FPU_IEEE): Likewise.
* math/Makefile (tests): Add test-fpucw.
* math/test-fpucw.c (main): New file.
2000-07-05 Ulrich Drepper <drepper@redhat.com>
2000-04-19 Jakub Jelinek <jakub@redhat.com>
* locale/programs/ld-ctype.c (ctype_output): Set size of the idx
field to nelems * sizeof (uint32_t).
* locale/programs/ld-address.c (address_output): Align word fields
properly.
* locale/programs/ld-monetary.c (monetary_output): Likewise.
Don't restart idx pointers to idx end at the duo_int_curr_symbol
field.
Avoid giving arbitrary garbage in the crncystr field.
Use sizeof(uint32_t) instead of 4 for len in uno_valid_from,
uno_valid_to, duo_valid_from, duo_valid_to and conversion_rate
fields.
* locale/programs/ld-numeric.c (numeric_output): Likewise.
Don't restart idx pointers to idx end at the decimal_point_wc field.
* locale/programs/ld-time.c (time_output): week_1stday should be
word, not byte. Align it properly.
2000-04-19 H.J. Lu <hjl@gnu.org>
* csu/gmon-start.c (_start): Declared as "extern void".
(etext): Likewise.
2000-04-18 Andreas Jaeger <aj@suse.de>
* manual/install.texi (Running make install): Don't mention utmpd
anymore.
2000-04-18 Andreas Jaeger <aj@suse.de>
* linuxthreads/Versions: Use ld instead of ld.so.
* elf/Makefile (ld-map): Use ld.map.
* Versions.def: Use ld instead of ld.so.
* elf/Versions: Likewise.
* sysdeps/mach/hurd/Versions: Likewise.
1999-11-25 H.J. Lu <hjl@gnu.org>
* stdlib/exit.c (exit): Run funtions only if
__exit_funcs->idx > 0.
1999-11-25 Ulrich Drepper <drepper@cygnus.com>
* manual/charset.texi (iconv Examples): Add iconv call to flush
state. Reported by Andrew Clausen <clausen@alphalink.com.au>.
1999-11-25 Andreas Jaeger <aj@suse.de>
* manual/install.texi (Running make install): Better describe
update from libc5.
Patch by Michael Deutschmann <michael@talamasca.wkpowerlink.com>.
1999-11-25 Andreas Jaeger <aj@suse.de>
* include/sys/mman.h: Remove K&R compatibility.
1999-11-15 Andreas Jaeger <aj@suse.de>
* misc/sys/mman.h: Use __REDIRECT for mmap, correct prototype to
use __off64_t.
1999-11-25 Ulrich Drepper <drepper@cygnus.com>
* iconv/iconv_prog.c (process_block): For stateful charsets write
out byte sequence to get to initial state at the end of the file.
which was reported to not work (which proofed to be wrong).
* sysdeps/unix/sysv/linux/sys/raw.h (RAW_MAJOR): Added.
1999-09-08 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* manual/install.texi (Configuring and compiling): Mention GCC 2.95.
1999-09-08 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* configure.in: Fix make version test for make 3.77.95 and later
versions.
Based on a patch by Paul D. Smith <psmith@baynetworks.com>.
1999-09-10 Ulrich Drepper <drepper@cygnus.com>
1999-08-28 Ulrich Drepper <drepper@cygnus.com>
* malloc/malloc.c (ptmalloc_init): Don't use variables to set
thresholds for SUID binaries. [PR libc/1277]
1999-08-28 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* manual/install.texi (Running make install): Give examples for
timezone and locale installation.
1999-08-28 Zack Weinberg <zack@bitmover.com>
* glibcbug.in: Get CCVERSION from autoconf substitution.
* configure.in: Calculate and substitute CCVERSION.
1999-08-28 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* sysdeps/unix/sysv/linux/mips/bits/sigaction.h: Fix sa_flags,
partially reverting a patch from 1998-12-29. We just can't change
the flags, kernels with different flags lead to
incompatibilities.
1999-07-25 Jakub Jelinek <jj@ultra.linux.cz>
* sysdeps/sparc/sparc32/sparcv8/Makefile: -mv8 is deprecated, use
-mcpu=v8.
* sysdeps/sparc/sparc32/sparcv9/Makefile: Likewise.
* sysdeps/sparc/sparc64/Makefile: Make %g7 register available for
libc's private use (as assembly routine clobber it anyway).
1999-07-26 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* README.template (configurations): The crypt add-on has a new
ftp site.
* manual/install.texi (Installation): Likewise.
1999-06-06 Ulrich Drepper <drepper@cygnus.com>
* malloc/malloc.c: Introduce local variable __libc_getpagesize to
avoid multiple calls to getpagesize() which might be a syscall.
1999-06-06 Philip Blundell <philb@gnu.org>
* stdio-common/tstscanf.c (main): Test the half-word format "%hd".
1999-06-06 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* manual/install.texi (Running make install): Correct typo in
dynamic linker invocation.
1999-06-05 Philip Blundell <philb@gnu.org>
* sysdeps/arm/dl-machine.h (elf_machine_load_address): Fix
problems with GOT addressing.
1999-06-05 Wolfram Gloger <wmglo@dent.med.uni-muenchen.de>
* malloc/malloc.c (check_action): Change into bitmap so that both
diagnostic and abort can be requested by setting it to 3.
(mALLOC_SET_STATe): Disable malloc checking if necessary.
1999-04-03 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* manual/install.texi (Configuring and compiling): Explain that
files are changed in the source directory.
Closes PR libc/981.
(Configuring and compiling): Explain situation with PARALLELMFLAGS
in the source directory.
1999-04-24 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
* locale/programs/ld-ctype.c: Spelling fixes.
(ctype_finish): Fix argument of error message format.
* locale/programs/ld-messages.c: Spelling fixes.
* locale/programs/ld-monetary.c: Spelling fixes.
* locale/programs/ld-time.c (time_finish): Make sure that name and
format of era_entries are adjacent.
(time_output): Reduce the size of the io vector.
1999-04-25 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
* manual/filesys.texi (Attribute Meanings): Move a misplaced
paragraph.
1999-04-23 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
* locale/programs/ld-collate.c (collate_output): Convert
undefined_offset to an array index. Fix computation of other
endian extra table.
1999-04-10 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* manual/install.texi (Configuring and compiling): Comment out
description of --disable-static since this doesn't work currently
(see change by Ulrich Drepper on 1998-12-07 for configure.in).
1999-03-05 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* manual/llio.texi (Open-time Flags): Clarify that O_SHLOCK and
O_EXLOCK are BSD extensions.
Reported by Jochen Voss <voss@mathematik.uni-kl.de> [PR libc/985].
1999-02-02 Ulrich Drepper <drepper@cygnus.com>
* sysdeps/unix/sysv/linux/reboot.c: Make sure first parameter is
correctly passed to the kernel even on 64bit platforms.
Patch by Bruce Elliott <bde@nwlink.com>.
* localedata/locales/it_CH: New file.
Contributed by Giacomo Amabile Catenazzi <gcatenaz@g26.ethz.ch>.
1998-11-09 18:16 Ulrich Drepper <drepper@cygnus.com>
* math/complex.h: Include bits/mathdef.h to get __NO_LONG_DOUBLE_MATH
is needed.
Don't define long double functions if __NO_LONG_DOUBLE_MATH is defined.
Don't define `complex' but instead `_Complex'. The later is the
reserved keyword.
* math/bits/cmathcalls.c: Define _Mdouble_complex_ using _Complex,
not complex.
1998-11-07 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
* manual/libc.texinfo: Remove colon from category name.
* manual/Makefile (dir-add.info): Likewise.
1998-11-07 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
* configure.in: Avoid autoconf bug.
1998-10-28 H.J. Lu <hjl@gnu.org>
* posix/getopt.h: Add "__" to arguments in prototypes.
1998-11-05 H.J. Lu <hjl@gnu.org>
* libio/iofgets.c (_IO_fgets): Don't report error
if something was read in and errno is set to
EAGAIN.
* libio/iofgets_u.c (fgets_unlocked): Likewise.
1998-11-05 Philip Blundell <philb@gnu.org>
* sysdeps/unix/sysv/linux/net/if_packet.h: Don't include kernel
header; it defines too much. Provide a local definition of struct
sockaddr_pkt and a comment advising against its use.
1998-11-06 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
* extra-lib.mk: Avoid empty include list.
1998-11-04 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
* extra-lib.mk: Add support for $(lib)-shared-only-routines.
* elf/Makefile (libdl-routines): Add dlopenold only if doing
versioning.
(libdl-shared-only-routines): New variable.
1998-11-06 Paul Eggert <eggert@twinsun.com>
Don't invoke localtime_r or gmtime_r unless it's the GNU C
library's localtime_r and gmtime_r; there are too many buggy
implementations of localtime_r and gmtime_r out there, and
it's not worth keeping track of all the different bugs.
* time/mktime.c (__EXTENSIONS__): Remove.
(<unistd.h>): No need to include.
Remove.
(my_mktime_localtime_r): Renamed from localtime_r; all uses changed.
Base it on localtime unless _LIBC.
* time/strftime.c (my_strftime_gmtime_r): Renamed from gmtime_r;
all uses changed.
(my_strftime_localtime_r): Renamed from localtime_r; all uses changed.
Base them on localtime/gmtime if not _LIBC.
* elf/rtld.c: Add a few __builtin_expects where they will improve
a lot.
1998-11-05 Ulrich Drepper <drepper@cygnus.com>
1998-11-04 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
* libio/genops.c (_IO_least_marker): Add additional parameter
end_p replacing fp->_IO_read_end.
(save_for_backup): Likewise. All callers changed. Use _IO_size_t
and _IO_ssize_t instead of int.
(_IO_switch_to_main_get_area): Remove use of _IO_save_ptr.
(_IO_switch_to_backup_area): Likewise. Fix comments.
(_IO_seekmark): Undo last change.
(_IO_default_pbackfail): Correct use of backup area.
* libio/libio.h (_IO_FILE_complete): Remove _IO_save_ptr.
1998-04-07 08:51 Ulrich Drepper <drepper@cygnus.com>
* iconv/gconv.c: Take care for NULL arguments.
* iconv/gconv_dl.c: Make find_func function global.
* iconv/gconv_int.h: Add prototype for __gconv_find_func.
Add prototypes for ASCII conversion functions.
* iconv/gconv_simple.c: Add ASCII conversion functions.
* locale/C-ctype.c: Correct charset name.
* wcsmbs/Makefile (distribute): Add wcsmbsload.h.
(routines): Remove wmemrtowcs and wmemrtombs, add wcsnlen and
wcsmbsload.
* wcsmbs/btowc.c: Rewrite to use iconv functionality.
* wcsmbs/mbrtowc.c: Likewise.
* wcsmbs/mbsnrtowcs.c: Likewise.
* wcsmbs/mbsrtowcs.c: Likewise.
* wcsmbs/wcrtomb.c: Likewise.
* wcsmbs/wcsnrtombs.c: Likewise.
* wcsmbs/wcsrtombs.c: Likewise.
* wcsmbs/wctob.c: Likewise.
* wcsmbs/wchar.h: Add prototype for __wcslen, wcsnlen. Remove
prototypes for wmemr*.
* wcsmbs/wcslen.c: Rename to __wcslen and make wcslen weak alias.
* wcsmbs/wcsnlen.c: New file.
* wcsmbs/wcsmbsload.c: New file.
* wcsmbs/wcsmbsload.h: New file.
* manual/filesys.texi: Mention risks of tmpnam and mktemp.
* manual/install.texi: Describe some more critical points.
* string/string.h: Add prototype for __strnlen.
* string/strnlen.c: Rename to __strnlen and make strnlen weak alias.
* sysdeps/posix/mktemp.c: Rewrite to allow many more files and
much less predictable names.
* sysdeps/posix/mkstemp.c: Likewise.
1998-04-05 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* manual/libc.texinfo (Top): Change "file namespace" to "local
namespace".
* manual/socket.texi: Change file namespace to local namespace.
(Out-of-Band Data): Remove unneeded variable link.
(Host Address Functions): Use uint32_t consequently and add a
number of clarifications for IPv4/IPv6, classless addresses.
(Internet Namespace): Added some paragraphs about IPv6.
Based on suggestions by Francesco Potorti` <F.Potorti@cnuce.cnr.it>.
1998-04-05 Philip Blundell <Philip.Blundell@pobox.com>
Update for draft-ietf-ipngwg-bsd-api-new-01.txt:
* resolv/netdb.h (getnameinfo): Use `socklen_t' not `size_t'.
(NI_NUMERICHOST, et al.): Tidy up and add comments.
(AI_NUMERICHOST): Define.
(getnodebyname): New prototype.
(AI_V4MAPPED, et al.): New constants.
* sysdeps/unix/bsd/bsd4.4/bits/sockaddr.h (SA_LEN): New macro.<
* sysdeps/generic/bits/sockaddr.h (SA_LEN): Likewise.
* sysdeps/unix/sysv/linux/Makefile (sysdep_routines): Add sa_len
for socket.
* sysdeps/unix/sysv/linux/sa_len.c: New file.
* sysdeps/unix/sysv/linux/Dist: Add sa_len.c.
* sysdeps/unix/sysv/linux/bits/socket.h: Make multiple #inclusion safe.
* sysdeps/generic/bits/sockunion.h: New file, defining sockaddr_union.
* sysdeps/unix/sysv/linux/bits/sockunion.h: Likewise.
* socket/Makefile (headers): Add bits/sockunion.h.
* socket/sys/socket.h: Include <bits/sockunion.h>
* inet/netinet/in.h: Include <bits/sockaddr.h> rather than
<sys/socket.h>, to avoid getting sockaddr_union defined.
* sysdeps/generic/bits/socket.h: Allow inclusion from netinet.in.h.
* sysdeps/unix/sysv/linux/bits/socket.h: Likewise.
* sysdeps/unix/sysv/linux/mips/bits/socket.h: Likewise.
* sysdeps/unix/sysv/linux/if_index.c: Remove use of SIOCGIFCOUNT
(2.2.x kernels won't have it).
1998-04-06 21:21 Ulrich Drepper <drepper@cygnus.com>
* sysdeps/mach/hurd/bits/ioctls.h: Allow inclusion from hurd/ioctl.h.
* sysdeps/mach/hurd/dl-sysdep.c: Use __ptr_t not caddr_t.
* iconv/gconv_conf.c: Define MAXPATHLEN if not available before.
Patches by UCHIYAMA Yasushi <uch@nop.or.jp>.
1998-04-05 Philip Blundell <Philip.Blundell@pobox.com>
* manual/socket.texi (Socket Addresses): Fix a typo.
(Interface Naming): New section.
1998-04-05 23:29 Zack Weinberg <zack@rabi.phys.columbia.edu>
* configure.in: Check for CC using $ac_tool_prefix, to handle
cross-compilation. Use AC_CHECK_TOOL to find MiG.
* config.make.in: Add MIG to be substituted.
* mach/Machrules: Don't define MIG variable.
Patch by Gordon Matzigkeit <gord@profitpress.com>.
1998-04-05 Mark Kettenis <kettenis@phys.uva.nl>
* elf/dl-load.c (decompose_rpath): Use local_strdup instead of
strdupa to copy rpath.
1998-04-05 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* configure.in: Fix gcc version check.
* aclocal.m4 (AC_PROG_CHECK_VER): Rewritten to make less confusing.
1998-04-05 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* configure.in: Fix gcc version check.
* aclocal.m4 (AC_PROG_CHECK_VER): Rewritten to make less
confusing.
1998-04-05 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* configure.in: Fix gcc version check.
* aclocal.m4 (AC_PROG_CHECK_VER): Rewritten to make less
confusing.
1998-03-31 Mark Kettenis <kettenis@phys.uva.nl>
* sysdeps/unix/bsd/unlockpt.c (unlockpt): Call __ptsname_r instead
of ptsname_r.
* stdlib/stdlib.h: Change prototype of ptsname_r to make it more
like ttyname_r.
* sysdeps/unix/sysv/linux/ptsname.c (__ptsname_r): Likewise.
* sysdeps/generic/ptsname.c (__ptsname_r): Likewise.
* sysdeps/unix/grantpt.c (grantpt): Change check of return value
of __ptsname_r accordingly.
* login/openpty.c (openpty): Likewise.
1998-06-04 18:47 H.J. Lu <hjl@gnu.org>
* libio/fileops.c (_IO_file_xsgetn): Adjust pointers.
1998-04-06 13:58 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* Makeconfig (libtypes): Redo H.J. Lu's change of 1998-03-27.
* Makerules: Readd missing rule for $(objpfx)stamp.oS.
1998-04-06 Thorsten Kukuk <kukuk@vt.uni-paderborn.de>
* nis/ypclnt.c: Don't give YPERR_RPC back, use the do_ypcall
return value for better error checking.
1998-03-30 12:53 Ulrich Drepper <drepper@cygnus.com>
* sysdeps/i386/i486/bits/string.h (__strcat_c) [__i686__]: Correct
scanning for \0.
(__strncat_g): Add i686 specific code.
1998-03-30 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* manual/install.texi (Reporting Bugs): Ask to include section
names in reports.
1998-03-28 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* sysdeps/unix/sysv/linux/Makefile ($(objpfx)syscall-%.h): Emit
guard against direct inclusion.
1998-03-28 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
Rework support for libc_nonshared.a:
* Makeconfig (object-suffixes-for-libc): New variable.
* Rules: Remove handling of static-only and shared-only routines.
* Makerules: Handle them here instead. Use
object-suffixes-for-libc instead of object-suffixes when dealing
with libc objects.
(object-suffixes-for-rules): Remove variable.
(elide-routines.oS): Elide all routines except static-only
routines.
($(objpfx)stamp.oS): Special rule for when static-only-routines is
empty.
(installed-libcs): Remove special case for .oS.
(rmobjs): Likewise.
1998-03-28 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* Makefile (do-collate-test, do-xfrm-test, do-tst-fmon,
do-tst-rpmatch): New targets.
(test): Use them.
(install-locales): Ignore comment lines.
1998-03-28 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* elf/Makefile ($(objpfx)ld.so): Depend on version script.
($(objpfx)trusted-dirs.h): Depend also on $(..)Makeconfig.
($(objpfx)rtldtbl.h): Likewise.
(CPPFLAGS-dl-load.c): Fix reference to object directory.
1998-03-30 09:36 Ulrich Drepper <drepper@cygnus.com>
* manual/string.texi (Finding Tokens in a String): Extend strsep
description and correct example.
1998-03-28 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* manual/socket.texi: Remove misguided explicit line breaks and
fix the formatting problem instead by reformulating the
paragraphs.
* manual/filesys.texi: Likewise.
* manual/conf.texi: Likewise. Don't typeset table with index
fonts, that looks worse than a minimally overfull line.
1998-03-28 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* nscd/Makefile (nscd-modules): Move definition outside of
conditional.
* pwd/Makefile: Use have-thread-library to test for thread
library.
1998-03-30 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* nss/getXXent_r.c (INTERNAL): Remove unused variable current_nip.
* iconvdata/uhc.c (gconv): Remove unused variable idx.
1998-03-30 Ulrich Drepper <drepper@cygnus.com>
* sysdeps/unix/sysv/linux/Dist: Add lddlibc4.c.
1998-03-26 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* manual/install.texi (Supported Configurations): Add
arm-linuxaout and arm-none.
1998-03-26 Ulrich Drepper <drepper@cygnus.com>
* version.h (VERSION): Bump to 2.0.93.
1998-03-25 07:30 H.J. Lu <hjl@gnu.org>
* configure.in (libc_cv_ar_S): New to indicate if ar S works.
* config.make.in (have-ar-S): New, substituted by libc_cv_ar_S.
* Makerules (CREATE_ARFLAGS): New determined by $(have-ar-S).
(do-ar, build-extra-lib): Use $(CREATE_ARFLAGS) for $(AR).
1998-03-26 Ulrich Drepper <drepper@cygnus.com>
* Makeconfig (link-libc): Add missing use of libc_nonshared.a.
1998-03-26 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
Put the static-only routines in a separate library.
* Makeconfig (libtype.oS, CFLAGS-.oS, CPPFLAGS-.oS): New
variables.
(all-object-suffixes): Add .oS.
* Makerules (libc_static-name): New variable.
(installed-libcs): Add libc_nonshared.a.
($(inst_libdir)/libc.so): Use libc_nonshared.a instead of libc.a.
(object-suffixes-for-rules): New variable. Use it instead of
object-suffixes for generating compilation rules.
(rmobjs): Also remove *.oS.
* Rules (subdir_lib): Depend on $(objpfx)stamp.oS.
($(objpfx)stamp.oS): New target.
1998-03-26 Ulrich Drepper <drepper@cygnus.com>
* Makefile (FAQ): Automatically check in regenerated FAQ.
1998-03-26 10:16 Zack Weinberg <zack@rabi.phys.columbia.edu>
* Makefile (INSTALL): Depend on install.texi, not maint.texi.
1998-03-25 Ulrich Drepper <drepper@cygnus.com>
* glibcbug.in: Create files safely when mktemp is not available.
* sysdeps/unix/sysv/linux/adjtime.c: Make weak alias appear again.
Patch by a sun <asun@saul1.u.washington.edu>.
1998-03-25 Thorsten Kukuk <kukuk@vt.uni-paderborn.de>
* libc.map: Rename getname to getnetname.
1998-03-25 13:35 Ulrich Drepper <drepper@cygnus.com>
* manual/maint.texi: Use supported platform in examples.
* manual/install.texi: Document some installation tips.
1998-03-25 10:56 Ulrich Drepper <drepper@cygnus.com>
* posix/wordexp.c: Fix some memory leaks and makes $* more efficient.
Fix a bug so that it returns an error if a numeric parameter is
unset and WRDE_UNDEF is set.
Patch by Andreas Schwab and Tim Waugh.
* posix/wordexp-test.c: Add new new test.
1998-03-25 Ulrich Drepper <drepper@cygnus.com>
* posix/regex.c (regex_compile): Last patch wasn't entirely
correct. Patch by Alain Magloire <alainm@rcsm.ece.mcgill.ca>.
1998-03-24 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* manual/filesys.texi (Scanning Directory Content): Fix typo.
1998-03-25 09:24 Bernd Schmidt <crux@Pool.Informatik.RWTH-Aachen.DE>
* sysdeps/i386/bits/string.h: Fix all assembler statements so that
clobbered registers don't appear as operands.
1998-03-18 14:25 Ulrich Drepper <drepper@cygnus.com>
* string/bits/string2.h: Add optimization for strdup.
Always define __strsep and __strtok_r and make real names available
when feature select macros are defined.
1998-03-18 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* manual/install.texi (Installation): Use i486-linux as example
instead of the unsupported sunos4.
(Reporting Bugs): Mention glibcbug script.
(Tools for Installation): gcc 2.8.1/egcs 1.0.2 is required.
1998-03-16 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* posix/wordexp-tst.sh: Make portable. Add more tests.
* posix/Makefile (do-globtest do-wordexp-test): New targets.
1998-03-18 13:38 Ulrich Drepper <drepper@cygnus.com>
* sysdeps/unix/sysv/linux/libc-start.c: Moved to ...
* sysdeps/generic/libc-start.c: ...here, replacing former content.
* sysdeps/unix/sysv/linux/Dist: Add netash/ash.h and
netpacket/packet.h.
* sysdeps/unix/sysv/linux/bits/socket.h: Pretty print.
1998-03-17 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* sysdeps/unix/sysv/linux/bits/resource.h: Remove trailing comma
in enumerator for strict standard compliance.
* sysdeps/generic/bits/resource.h: Likewise.
1998-03-18 10:04 Philip Blundell <pb@nexus.co.uk>
* sysdeps/arm/sysdep.h (__ARM_USES_FP): Deleted.
(PLTJMP): New macro.
* sysdeps/arm/fpu/__longjmp.S: New file, implementation of
longjmp() when floating point enabled.
* sysdeps/arm/fpu/setjmp.S: Likewise for setjmp().
* sysdeps/arm/__longjmp.S: Remove floating point code.
* sysdeps/arm/setjmp.S: Likewise.
* sysdeps/arm/bsd-setjmp.S: Call __sigsetjmp by correct name.
* sysdeps/arm/bsd-_setjmp.S: Likewise.
* sysdeps/arm/memset.S: New file; optimised ARM implementation of
memset().
* sysdeps/generic/setsockopt.c (setsockopt): Keep in step with
prototype.
1998-03-17 16:16 Philip Blundell <pb@nexus.co.uk>
Based on patches from Pat Beirne and Scott Bambrough:
* sysdeps/arm/__longjmp.S: Use ip, not r2, as temporary.
* sysdeps/arm/bits/fenv.h: New file.
* sysdeps/arm/dl-machine.h: New file. Add ELF support.
* sysdeps/arm/elf/setjmp.S: Likewise.
* sysdeps/arm/elf/start.S: Likewise.
* sysdeps/arm/init-first.c: Likewise.
* sysdeps/arm/setjmp.S: Call __sigjmp_save through PLT
* sysdeps/arm/sysdep.h: Change format of .type directive. Correct
comment about floating point to reflect current reality.
* sysdeps/unix/arm/brk.S: Support PIC.
* sysdeps/unix/arm/sysdep.S (syscall_error): Support PIC and
re-entrant code.
* sysdeps/unix/sysv/linux/arm/socket.S: Check correctly for error
return; call syscall_error through PLT.
* sysdeps/unix/sysv/linux/arm/sysdep.h (ENTRY): Correct error jump.
1998-03-04 12:01 Philip Blundell <pb@nexus.co.uk>
* sysdeps/unix/sysv/linux/netpacket/packet.h: New file.
* sysdeps/unix/sysv/linux/netash/ash.h: Likewise.
* sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Install them.
1998-03-18 00:25 Tim Waugh <tim@cyberelk.demon.co.uk>
* posix/wordexp.c (parse_comm): Allow quoting inside $(...).
(parse_param): Fold in Andreas' fixes to do with when the end of
the parameter name has been reached, and quoting inside ${...}.
(parse_dollars): Fix differentiation between $(((1+3)*(4-2))) and
$((echo);(ls)).
1998-03-16 22:10 Zack Weinberg <zack@rabi.phys.columbia.edu>
* manual/maint.texi: Split out installation and contribution
sections to their own appendices. Misc cleanups.
* manual/install.texi: New file. Mention add-ons. Refer to FAQ.
* manual/contrib.texi: New file.
* manual/libc.texinfo: Pull in new appendices.
* manual/header.texi: Correct node pointer.
1998-03-17 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* manual/process.texi (Process Completion): Clarify return value
of waitpid a bit. Patch by Zack Weinberg. [PR libc/490]
