When swapcontext.c is compiled without -g, the following error occurs:
Error: CFI instruction used without previous .cfi_startproc
Fix by converting swapcontext routine to assembler.
This patch associates iconv_close as a deallocator for iconv_open. This
required moving the iconv_close declaration above iconv_open.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
This patch associates closedir as a deallocation for opendir and fdopendir.
This required moving the closedir declaration above the other 2 functions.
Reviewed-by: Paul Eggert <eggert@cs.ucla.edu>
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
This patch adds access function attributes to the re-entrant functions
in grp.h and shadow headers.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
dlopen may clobber errno. The nss_test_errno module uses an ELF
constructor to achieve that, but there could be internal errors
during dlopen that cause this, too. Therefore, the NSS framework
has to guard against such errno clobbers.
__nss_module_get_function is currently the only function that calls
__nss_module_load, so it is sufficient to save and restore errno
around this call.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
They are not actually installed. Use the nss_files version instead
in nss/Makefile, similar to how __nss_shlib_revision is derived
from LIBNSS_FILES_SO.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This addresses more (correct) use-after-free warnings reported by
GCC 12 on some targets.
Fixes commit c094c232eb ("Avoid
-Wuse-after-free in tests [BZ #26779].").
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
This patch adds some missing access function attributes to getrandom /
getentropy and several functions in sys/xattr.h
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The _IO_wfile_overflow does not check if the write pointer for wide
data is valid before access, different than _IO_file_overflow. This
leads to crash on some cases, as described by bug 28828.
The minimal sequence to produce the crash was:
#include <stdio.h>
#include <wchar.h>
int main (int ac, char **av)
{
setvbuf (stdout, NULL, _IOLBF, 0);
fgetwc (stdin);
fputwc (10, stdout); /*CRASH HERE!*/
return 0;
}
The "fgetwc(stdin);" is necessary since it triggers the bug by setting
the flag _IO_CURRENTLY_PUTTING on stdout indirectly (file wfileops.c,
function _IO_wfile_underflow, line 213).
Signed-off-by: Jose Bollo <jobol@nonadev.net>
The 'not_first' is accessed on nrl_domainname() in a non atomically
way, although it is only updated after the lock is taken.
This patch fix the double-checked locking by using acquire-release
atomic operation instead of plain load and by moving the 'not_first'
store only after 'domain' is actually set.
Checked on x86_64-linux-gnu.
Reviewed-by: DJ Delorie <dj@redhat.com>
Commit ac759b1fbf added attribute
"overlap" to bench-memmove-walk, whose value is a string. This change
makes compare_strings.py fail since benchout_strings.schema.json
requires the values of attributes to be number.
This patch relaxes such constraint.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
