Rename atomic_exchange_rel/acq to use atomic_exchange_release/acquire
since these map to the standard C11 atomic builtins.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
We should default to the larger code model, in order to support
larger applications built with -static -pie. This should be
consistent with pic-ccflag, which defaults to -fPIC.
Remove the now redundant override from sysdeps/sparc/Makefile.
Note that -fno-pie and -fno-PIE have the same effect.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Add a proper bounds check to __libc_ifunc_impl_list. This makes MAX_IFUNC
redundant and fixes several targets that will write outside the array.
To avoid unnecessary large diffs, pass the maximum in the argument 'i' to
IFUNC_IMPL_ADD - 'max' can be used in new ifunc definitions and existing
ones can be updated if desired.
Passes buildmanyglibc.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Since ad43cac44a the generic code already shuffles the argv/envp/auxv
on the stack to remove the ld.so own arguments and thus _dl_skip_args
is always 0. So there is no need to adjust the argc or argv.
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Both float, double, and _Float128 are assumed to be supported
(float and double already only uses builtins). Only long double
is parametrized due GCC bug 29253 which prevents its usage on
powerpc.
It allows to remove i686, ia64, x86_64, powerpc, and sparc arch
specific implementation.
On ia64 it also fixes the sNAN handling:
math/test-float64x-fabs
math/test-ldouble-fabs
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc-linux-gnu,
powerpc64-linux-gnu, sparc64-linux-gnu, and ia64-linux-gnu.
_dl_skip_args is always 0, so the target specific code that modifies
argv after relro protection is applied is no longer used.
After the patch relro protection is applied to _dl_argv consistently
on all targets.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
PI_STATIC_AND_HIDDEN indicates whether accesses to internal linkage
variables and hidden visibility variables in a shared object (ld.so)
need dynamic relocations (usually R_*_RELATIVE). PI (position
independent) in the macro name is a misnomer: a code sequence using GOT
is typically position-independent as well, but using dynamic relocations
does not meet the requirement.
Not defining PI_STATIC_AND_HIDDEN is legacy and we expect that all new
ports will define PI_STATIC_AND_HIDDEN. Current ports defining
PI_STATIC_AND_HIDDEN are more than the opposite. Change the configure
default.
No functional change.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
-z combreloc has been the default regadless of the architecture since
binutils commit f4d733664aabd7bd78c82895e030ec9779a92809 (2002). The
configure check added in commit fdde83499a (2001) has long been
unneeded.
We can therefore treat HAVE_Z_COMBRELOC as always 1 and delete dead code
paths in dl-machine.h files (many were copied from commit a711b01d34
and ee0cb67ec2).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
For sparc64 is the same as the generic implementation, while for
sparc32 the builtin generates the same code.
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
Prelinked binaries and libraries still work, the dynamic tags
DT_GNU_PRELINKED, DT_GNU_LIBLIST, DT_GNU_CONFLICT just ignored
(meaning the process is reallocated as default).
The loader environment variable TRACE_PRELINKING is also removed,
since it used solely on prelink.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
And use machine-sp.h instead. The Linux implementation is based on
already provided CURRENT_STACK_FRAME (used on nptl code) and
STACK_GROWS_UPWARD is replaced with _STACK_GROWS_UP.
It consolidates the code required to call la_pltexit audit
callback.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Build glibc programs and tests as PIE by default and enable static-pie
automatically if the architecture and toolchain supports it.
Also add a new configuration option --disable-default-pie to prevent
building programs as PIE.
Only the following architectures now have PIE disabled by default
because they do not work at the moment. hppa, ia64, alpha and csky
don't work because the linker is unable to handle a pcrel relocation
generated from PIE objects. The microblaze compiler is currently
failing with an ICE. GNU hurd tries to enable static-pie, which does
not work and hence fails. All these targets have default PIE disabled
at the moment and I have left it to the target maintainers to enable PIE
on their targets.
build-many-glibcs runs clean for all targets. I also tested x86_64 on
Fedora and Ubuntu, to verify that the default build as well as
--disable-default-pie work as expected with both system toolchains.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
TLS_INIT_TCB_ALIGN is not actually used. TLS_TCB_ALIGN was likely
introduced to support a configuration where the thread pointer
has not the same alignment as THREAD_SELF. Only ia64 seems to use
that, but for the stack/pointer guard, not for storing tcbhead_t.
Some ports use TLS_TCB_OFFSET and TLS_PRE_TCB_SIZE to shift
the thread pointer, potentially landing in a different residue class
modulo the alignment, but the changes should not impact that.
In general, given that TLS variables have their own alignment
requirements, having different alignment for the (unshifted) thread
pointer and struct pthread would potentially result in dynamic
offsets, leading to more complexity.
hppa had different values before: __alignof__ (tcbhead_t), which
seems to be 4, and __alignof__ (struct pthread), which was 8
(old default) and is now 32. However, it defines THREAD_SELF as:
/* Return the thread descriptor for the current thread. */
# define THREAD_SELF \
({ struct pthread *__self; \
__self = __get_cr27(); \
__self - 1; \
})
So the thread pointer points after struct pthread (hence __self - 1),
and they have to have the same alignment on hppa as well.
Similarly, on ia64, the definitions were different. We have:
# define TLS_PRE_TCB_SIZE \
(sizeof (struct pthread) \
+ (PTHREAD_STRUCT_END_PADDING < 2 * sizeof (uintptr_t) \
? ((2 * sizeof (uintptr_t) + __alignof__ (struct pthread) - 1) \
& ~(__alignof__ (struct pthread) - 1)) \
: 0))
# define THREAD_SELF \
((struct pthread *) ((char *) __thread_self - TLS_PRE_TCB_SIZE))
And TLS_PRE_TCB_SIZE is a multiple of the struct pthread alignment
(confirmed by the new _Static_assert in sysdeps/ia64/libc-tls.c).
On m68k, we have a larger gap between tcbhead_t and struct pthread.
But as far as I can tell, the port is fine with that. The definition
of TCB_OFFSET is sufficient to handle the shifted TCB scenario.
This fixes commit 23c77f6018
("nptl: Increase default TCB alignment to 32").
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
rseq support will use a 32-byte aligned field in struct pthread,
so the whole struct needs to have at least that alignment.
nptl/tst-tls3mod.c uses TCB_ALIGNMENT, therefore include <descr.h>
to obtain the fallback definition.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
No bug.
This commit adds support for __memcmpeq() as a new ABI for all
targets. In this commit __memcmpeq() is implemented only as an alias
to the corresponding targets memcmp() implementation. __memcmpeq() is
added as a new symbol starting with GLIBC_2.35 and defined in string.h
with comments explaining its behavior. Basic tests that it is callable
and works where added in string/tester.c
As discussed in the proposal "Add new ABI '__memcmpeq()' to libc"
__memcmpeq() is essentially a reserved namespace for bcmp(). The means
is shares the same specifications as memcmp() except the return value
for non-equal byte sequences is any non-zero value. This is less
strict than memcmp()'s return value specification and can be better
optimized when a boolean return is all that is needed.
__memcmpeq() is meant to only be called by compilers if they can prove
that the return value of a memcmp() call is only used for its boolean
value.
All tests in string/tester.c passed. As well build succeeds on
x86_64-linux-gnu target.
The 4af6982e4c fix does not fully handle RTLD_BOOTSTRAP usage on
rtld.c due two issues:
1. RTLD_BOOTSTRAP is also used on dl-machine.h on various
architectures and it changes the semantics of various machine
relocation functions.
2. The elf_get_dynamic_info() change was done sideways, previously
to 490e6c62aa get-dynamic-info.h was included by the first
dynamic-link.h include *without* RTLD_BOOTSTRAP being defined.
It means that the code within elf_get_dynamic_info() that uses
RTLD_BOOTSTRAP is in fact unused.
To fix 1. this patch now includes dynamic-link.h only once with
RTLD_BOOTSTRAP defined. The ELF_DYNAMIC_RELOCATE call will now have
the relocation fnctions with the expected semantics for the loader.
And to fix 2. part of 4af6982e4c is reverted (the check argument
elf_get_dynamic_info() is not required) and the RTLD_BOOTSTRAP
pieces are removed.
To reorganize the includes the static TLS definition is moved to
its own header to avoid a circular dependency (it is defined on
dynamic-link.h and dl-machine.h requires it at same time other
dynamic-link.h definition requires dl-machine.h defitions).
Also ELF_MACHINE_NO_REL, ELF_MACHINE_NO_RELA, and ELF_MACHINE_PLT_REL
are moved to its own header. Only ancient ABIs need special values
(arm, i386, and mips), so a generic one is used as default.
The powerpc Elf64_FuncDesc is also moved to its own header, since
csu code required its definition (which would require either include
elf/ folder or add a full path with elf/).
Checked on x86_64, i686, aarch64, armhf, powerpc64, powerpc32,
and powerpc64le.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
dynamic-link.h is included more than once in some elf/ files (rtld.c,
dl-conflict.c, dl-reloc.c, dl-reloc-static-pie.c) and uses GCC nested
functions. This harms readability and the nested functions usage
is the biggest obstacle prevents Clang build (Clang doesn't support GCC
nested functions).
The key idea for unnesting is to add extra parameters (struct link_map
*and struct r_scope_elm *[]) to RESOLVE_MAP,
ELF_MACHINE_BEFORE_RTLD_RELOC, ELF_DYNAMIC_RELOCATE, elf_machine_rel[a],
elf_machine_lazy_rel, and elf_machine_runtime_setup. (This is inspired
by Stan Shebs' ppc64/x86-64 implementation in the
google/grte/v5-2.27/master which uses mixed extra parameters and static
variables.)
Future simplification:
* If mips elf_machine_runtime_setup no longer needs RESOLVE_GOTSYM,
elf_machine_runtime_setup can drop the `scope` parameter.
* If TLSDESC no longer need to be in elf_machine_lazy_rel,
elf_machine_lazy_rel can drop the `scope` parameter.
Tested on aarch64, i386, x86-64, powerpc64le, powerpc64, powerpc32,
sparc64, sparcv9, s390x, s390, hppa, ia64, armhf, alpha, and mips64.
In addition, tested build-many-glibcs.py with {arc,csky,microblaze,nios2}-linux-gnu
and riscv64-linux-gnu-rv64imafdc-lp64d.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch adds the narrowing fused multiply-add functions from TS
18661-1 / TS 18661-3 / C2X to glibc's libm: ffma, ffmal, dfmal,
f32fmaf64, f32fmaf32x, f32xfmaf64 for all configurations; f32fmaf64x,
f32fmaf128, f64fmaf64x, f64fmaf128, f32xfmaf64x, f32xfmaf128,
f64xfmaf128 for configurations with _Float64x and _Float128;
__f32fmaieee128 and __f64fmaieee128 aliases in the powerpc64le case
(for calls to ffmal and dfmal when long double is IEEE binary128).
Corresponding tgmath.h macro support is also added.
The changes are mostly similar to those for the other narrowing
functions previously added, especially that for sqrt, so the
description of those generally applies to this patch as well. As with
sqrt, I reused the same test inputs in auto-libm-test-in as for
non-narrowing fma rather than adding extra or separate inputs for
narrowing fma. The tests in libm-test-narrow-fma.inc also follow
those for non-narrowing fma.
The non-narrowing fma has a known bug (bug 6801) that it does not set
errno on errors (overflow, underflow, Inf * 0, Inf - Inf). Rather
than fixing this or having narrowing fma check for errors when
non-narrowing does not (complicating the cases when narrowing fma can
otherwise be an alias for a non-narrowing function), this patch does
not attempt to check for errors from narrowing fma and set errno; the
CHECK_NARROW_FMA macro is still present, but as a placeholder that
does nothing, and this missing errno setting is considered to be
covered by the existing bug rather than needing a separate open bug.
missing-errno annotations are duly added to many of the
auto-libm-test-in test inputs for fma.
This completes adding all the new functions from TS 18661-1 to glibc,
so will be followed by corresponding stdc-predef.h changes to define
__STDC_IEC_60559_BFP__ and __STDC_IEC_60559_COMPLEX__, as the support
for TS 18661-1 will be at a similar level to that for C standard
floating-point facilities up to C11 (pragmas not implemented, but
library functions done). (There are still further changes to be done
to implement changes to the types of fromfp functions from N2548.)
Tested as followed: natively with the full glibc testsuite for x86_64
(GCC 11, 7, 6) and x86 (GCC 11); with build-many-glibcs.py with GCC
11, 7 and 6; cross testing of math/ tests for powerpc64le, powerpc32
hard float, mips64 (all three ABIs, both hard and soft float). The
different GCC versions are to cover the different cases in tgmath.h
and tgmath.h tests properly (GCC 6 has _Float* only as typedefs in
glibc headers, GCC 7 has proper _Float* support, GCC 8 adds
__builtin_tgmath).
All the ports now have THREAD_GSCOPE_IN_TCB set to 1. Remove all
support for !THREAD_GSCOPE_IN_TCB, along with the definition itself.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20210915171110.226187-4-bugaevc@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
include/math.h has a mechanism to redirect internal calls to various
libm functions, that can often be inlined by the compiler, to call
non-exported __* names for those functions in the case when the calls
aren't inlined, with the redirection being disabled when
NO_MATH_REDIRECT. Add fma to the functions to which this mechanism is
applied.
At present, libm-internal fma calls (generally to __builtin_fma*
functions) are only done when it's known the call will be inlined,
with alternative code not relying on an fma operation being used in
the caller otherwise. This patch is in preparation for adding the TS
18661 / C2X narrowing fma functions to glibc; it will be natural for
the narrowing function implementations to call the underlying fma
functions unconditionally, with this either being inlined or resulting
in an __fma* call. (Using two levels of round-to-odd computation like
that, in the case where there isn't an fma hardware instruction, isn't
optimal but is certainly a lot simpler for the initial implementation
than writing different narrowing fma implementations for all the
various pairs of formats.)
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by the patch (using
<https://sourceware.org/pipermail/libc-alpha/2021-September/130991.html>
to fix installed library stripping in build-many-glibcs.py). Also
tested for x86_64.
We stopped adding "Contributed by" or similar lines in sources in 2012
in favour of git logs and keeping the Contributors section of the
glibc manual up to date. Removing these lines makes the license
header a bit more consistent across files and also removes the
possibility of error in attribution when license blocks or files are
copied across since the contributed-by lines don't actually reflect
reality in those cases.
Move all "Contributed by" and similar lines (Written by, Test by,
etc.) into a new file CONTRIBUTED-BY to retain record of these
contributions. These contributors are also mentioned in
manual/contrib.texi, so we just maintain this additional record as a
courtesy to the earlier developers.
The following scripts were used to filter a list of files to edit in
place and to clean up the CONTRIBUTED-BY file respectively. These
were not added to the glibc sources because they're not expected to be
of any use in future given that this is a one time task:
https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dchttps://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
They provide TLS_GD/TLS_LD/TLS_IE/TLS_IE macros for TLS testing. Now
that we have migrated to __thread and tls_model attributes, these macros
are unused and the tls-macros.h files can retire.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Only the placeholder compatibility symbols are left now.
The __errno_location symbol was removed (moved) using
scripts/move-symbol-to-libc.py.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
For some architectures, the two functions are aliased, so these
symbols need to be moved at the same time.
The symbols were moved using scripts/move-symbol-to-libc.py.
For j0f/j1f/y0f/y1f, the largest error for all binary32
inputs is reduced to at most 9 ulps for all rounding modes.
The new code is enabled only when there is a cancellation at the very end of
the j0f/j1f/y0f/y1f computation, or for very large inputs, thus should not
give any visible slowdown on average. Two different algorithms are used:
* around the first 64 zeros of j0/j1/y0/y1, approximation polynomials of
degree 3 are used, computed using the Sollya tool (https://www.sollya.org/)
* for large inputs, an asymptotic formula from [1] is used
[1] Fast and Accurate Bessel Function Computation,
John Harrison, Proceedings of Arith 19, 2009.
Inputs yielding the new largest errors are added to auto-libm-test-in,
and ulps are regenerated for various targets (thanks Adhemerval Zanella).
Tested on x86_64 with --disable-multi-arch and on powerpc64le-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This will be used to consolidate the libgcc_s access for backtrace
and pthread_cancel.
Unlike the existing backtrace implementations, it provides some
hardening based on pointer mangling.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It turns out the startup code in csu/elf-init.c has a perfect pair of
ROP gadgets (see Marco-Gisbert and Ripoll-Ripoll, "return-to-csu: A
New Method to Bypass 64-bit Linux ASLR"). These functions are not
needed in dynamically-linked binaries because DT_INIT/DT_INIT_ARRAY
are already processed by the dynamic linker. However, the dynamic
linker skipped the main program for some reason. For maximum
backwards compatibility, this is not changed, and instead, the main
map is consulted from __libc_start_main if the init function argument
is a NULL pointer.
For statically linked binaries, the old approach based on linker
symbols is still used because there is nothing else available.
A new symbol version __libc_start_main@@GLIBC_2.34 is introduced because
new binaries running on an old libc would not run their ELF
constructors, leading to difficult-to-debug issues.
Remove the wordsize-64 implementations by merging them into the main dbl-64
directory. The second patch just moves all wordsize-64 files and removes a
few wordsize-64 uses in comments and Implies files.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
Now __thread_gscope_wait (the function behind THREAD_GSCOPE_WAIT,
formerly __wait_lookup_done) can be implemented directly in ld.so,
eliminating the unprotected GL (dl_wait_lookup_done) function
pointer.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
There are several compiler implementations that allow large stack
allocations to jump over the guard page at the end of the stack and
corrupt memory beyond that. See CVE-2017-1000364.
Compilers can emit code to probe the stack such that the guard page
cannot be skipped, but on aarch64 the probe interval is 64K by default
instead of the minimum supported page size (4K).
This patch enforces at least 64K guard on aarch64 unless the guard
is disabled by setting its size to 0. For backward compatibility
reasons the increased guard is not reported, so it is only observable
by exhausting the address space or parsing /proc/self/maps on linux.
On other targets the patch has no effect. If the stack probe interval
is larger than a page size on a target then ARCH_MIN_GUARD_SIZE can
be defined to get large enough stack guard on libc allocated stacks.
The patch does not affect threads with user allocated stacks.
Fixes bug 26691.
This consolidates the copy-pasted arch specific semaphore header into
single version (based on s390) which suffices 32-bit and and 64-bit
arch/ABI based on the canonical WORDSIZE.
For now I've left out arches which use alternate defines to choose for
32 vs 64-bit builds (aarch64, mips) which in theory can also use the same
header.
Passes build-many for
aarch64-linux-gnu arm-linux-gnueabi arm-linux-gnueabihf
riscv64-linux-gnu-rv64imac-lp64 riscv64-linux-gnu-rv64imafdc-lp64
x86_64-linux-gnu microblaze-linux-gnu nios2-linux-gnu
Suggested-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
