To check for the pidfd functions pidfd_open, pidfd_getfd, pid_send_signal,
and waitid with P_PIDFD.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.4 (3695eae5fee0605f316fbaad0b9e3de791d7dfaf)
to extend waitid to wait on pidfd.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This was added on Linux 5.1(3eb39f47934f9d5a3027fe00d906a45fe3a15fad)
as a way to avoid the race condition of using kill (where PID might be
reused by the kernel between between obtaining the pid and sending the
signal).
If the siginfo_t argument is NULL then pidfd_send_signal is equivalent
to kill. If it is not NULL pidfd_send_signal is equivalent to
rt_sigqueueinfo.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This was added on Linux 5.6 (8649c322f75c96e7ced2fec201e123b2b073bf09)
as a way to retrieve a file descriptors for another process though
pidfd (created either with CLONE_PIDFD or pidfd_getfd). The
functionality is similar to recvmmsg SCM_RIGHTS.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This was added on Linux 5.3 (32fcb426ec001cb6d5a4a195091a8486ea77e2df)
as a way to retrieve a pid file descriptors for process that has not
been created CLONE_PIDFD (by usual fork/clone).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
A separate asm file is easier to maintain than a macro that expands to
inline asm.
The RTLD_START macro is only needed now because _dl_start is local in
rtld.c, but _start has to call it, if _dl_start was made hidden then it
could be empty.
_dl_skip_args is no longer needed.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This is for bug 23293 and it relies on the glibc test system running
tests via explicit ld.so invokation by default.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
_dl_skip_args is always 0, so the target specific code that modifies
argv after relro protection is applied is no longer used.
After the patch relro protection is applied to _dl_argv consistently
on all targets.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
When an executable is invoked as
./ld.so [ld.so-args] ./exe [exe-args]
then the argv is adujusted in ld.so before calling the entry point of
the executable so ld.so args are not visible to it. On most targets
this requires moving argv, env and auxv on the stack to ensure correct
stack alignment at the entry point. This had several issues:
- The code for this adjustment on the stack is written in asm as part
of the target specific ld.so _start code which is hard to maintain.
- The adjustment is done after _dl_start returns, where it's too late
to update GLRO(dl_auxv), as it is already readonly, so it points to
memory that was clobbered by the adjustment. This is bug 23293.
- _environ is also wrong in ld.so after the adjustment, but it is
likely not used after _dl_start returns so this is not user visible.
- _dl_argv was updated, but for this it was moved out of relro, which
changes security properties across targets unnecessarily.
This patch introduces a generic _dl_start_args_adjust function that
handles the argument adjustments after ld.so processed its own args
and before relro protection is applied.
The same algorithm is used on all targets, _dl_skip_args is now 0, so
existing target specific adjustment code is no longer used. The bug
affects aarch64, alpha, arc, arm, csky, ia64, nios2, s390-32 and sparc,
other targets don't need the change in principle, only for consistency.
The GNU Hurd start code relied on _dl_skip_args after dl_main returned,
now it checks directly if args were adjusted and fixes the Hurd startup
data accordingly.
Follow up patches can remove _dl_skip_args and DL_ARGV_NOT_RELRO.
Tested on aarch64-linux-gnu and cross tested on i686-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The Linux version used by i686 and m68k provide three overrrides for
generic code:
1. DISTINGUISH_LIB_VERSIONS to print additional information when
libc5 is used by a dependency.
2. EXTRA_LD_ENVVARS to that enabled LD_LIBRARY_VERSION environment
variable.
3. EXTRA_UNSECURE_ENVVARS to add two environment variables related
to aout support.
None are really requires, it has some decades since libc5 or aout
suppported was removed and Linux even remove support for aout files.
The LD_LIBRARY_VERSION is also dead code, dl_correct_cache_id is not
used anywhere.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
The kernel version check is used to avoid glibc to run on older
kernels where some syscall are not available and fallback code are
not enabled to handle graciously fail. However, it does not prevent
if the kernel does not correctly advertise its version through
vDSO note, uname or procfs.
Also kernel version checks are sometime not desirable by users,
where they want to deploy on different system with different kernel
version knowing the minimum set of syscall is always presented on
such systems.
The kernel version check has been removed along with the
LD_ASSUME_KERNEL environment variable. The minimum kernel used to
built glibc is still provided through NT_GNU_ABI_TAG ELF note and
also printed when libc.so is issued.
Checked on x86_64-linux-gnu.
Currently on Linux __get_nprocs_conf first tries to enumerate the
cpus present in the system by iterating on /sys/devices/system/cpuX
directories. This only enumerates the CPUs that are present in
system (but possibly offline), not taking in account possible CPU
that might added in the system through hotplugging.
Linux provides the maximum number of configured cpus on the
/sys/devices/system/cpu file. Although it might present a larger
value of possible active CPUs on some system (where kernel either
get the information from firmaware or is configured at boot time),
the information is what kernel presents to userland.
This also change the returned value of _SC_NPROCESSORS_CONF, which
aligns as the maximum configure cpu in the system.
Checked on x86_64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
This implements mmap fallback for a brk failure during TLS
allocation.
scripts/tls-elf-edit.py is updated to support the new patching method.
The script no longer requires that in the input object is of ET_DYN
type.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Both symbols are marked as legacy in POSIX.1-2001 and removed on
POSIX.1-2008, although the prototypes are defined for _GNU_SOURCE
or _DEFAULT_SOURCE.
GCC also replaces bcopy with a memmove and bzero with memset on default
configuration (to actually get a bzero libc call the code requires
to omit string.h inclusion and built with -fno-builtin), so it is
highly unlikely programs are actually calling libc bzero symbol.
On a recent Linux distro (Ubuntu 22.04), there is no bzero calls
by the installed binaries.
$ cat count_bstring.sh
#!/bin/bash
files=`IFS=':';for i in $PATH; do test -d "$i" && find "$i" -maxdepth 1 -executable -type f; done`
total=0
for file in $files; do
symbols=`objdump -R $file 2>&1`
if [ $? -eq 0 ]; then
ncalls=`echo $symbols | grep -w $1 | wc -l`
((total=total+ncalls))
if [ $ncalls -gt 0 ]; then
echo "$file: $ncalls"
fi
fi
done
echo "TOTAL=$total"
$ ./count_bstring.sh bzero
TOTAL=0
Checked on x86_64-linux-gnu.
Avoid fiddling with autoconf internals and use AC_DEFINE_UNQUOTED to
define macros in the configuration headers rather than handcoding an
equivalent shell sequence with the use of the `as_echo' undocumented
variable.
Switch to using AC_MSG_ERROR rather than `echo' and `exit' directly for
error handling. Owing to the lack of any kind of error annotation it
makes it difficult to spot the message in the flood in a parallel build
and neither it is logged in `config.log'.
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Avoid fiddling with autoconf internals and use AC_DEFINE_UNQUOTED to
define macros in the configuration headers rather than handcoding an
equivalent shell sequence with the use of the `as_echo' undocumented
variable.
Similarly use AC_MSG_ERROR for error handling rather than the internal
undocumented `as_fn_error' variable. Switch to using 1 as the exit code
as it makes no sense to refer $? in the contexts involved, it's not a
command failure handled there.
Switch to using AC_MSG_ERROR rather than `echo' and `exit' directly for
error handling. Owing to the lack of any kind of error annotation it
makes it difficult to spot the message in the flood in a parallel build
and neither it is logged in `config.log'.
Avoid fiddling with autoconf internals and use AC_DEFINE_UNQUOTED to
define macros in the configuration headers rather than handcoding an
equivalent shell sequence with the use of the `as_echo' undocumented
variable.
Switch to using AC_MSG_ERROR rather than `echo' and `exit' directly for
error handling. Owing to the lack of any kind of error annotation it
makes it difficult to spot the message in the flood in a parallel build
and neither it is logged in `config.log'.
The siglist.c is built with -fno-toplevel-reorder to avoid compiler
to reorder the compat assembly directives due an assembler
issue [1] (fixed on 2.39).
This patch removes the compiler flags by split the compat symbol
generation in two phases. First the __sys_siglist and __sys_sigabbrev
without any compat symbol directive is preprocessed to generate an
assembly source code. This generate assembly is then used as input
on a platform agnostic siglist.S which then creates the compat
definitions. This prevents compiler to move any compat directive
prior the _sys_errlist definition itself.
Checked on a make check run-built-tests=no on all affected ABIs.
Reviewed-by: Fangrui Song <maskray@google.com>
The errlist.c is built with -fno-toplevel-reorder to avoid compiler to
reorder the compat assembly directives due an assembler issue [1]
(fixed on 2.39).
This patch removes the compiler flags by split the compat symbol
generation in two phases. First the _sys_errlist_internal internal
without any compat symbol directive is preprocessed to generate an
assembly source code. This generate assembly is then used as input
on a platform agnostic errlist-data.S which then creates the compat
definitions. This prevents compiler to move any compat directive
prior the _sys_errlist_internal definition itself.
Checked on a make check run-built-tests=no on all affected ABIs.
[1] https://sourceware.org/bugzilla/show_bug.cgi?id=29012
And keep the previous definition if it exists. This allows
disabling IA64_USE_NEW_STUB while keeping USE_DL_SYSINFO defined.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Unlike MMAP_CALL, this avoids a TCB dependency for an errno update
on failure.
<mmap_internal.h> cannot be included as is on several architectures
due to the definition of page_unit, so introduce a separate header
file for the definition of MMAP_CALL and MMAP_CALL_INTERNAL,
<mmap_call.h>.
Reviewed-by: Stefan Liebler <stli@linux.ibm.com>
Improve libmvec benchmark integration so that in future other
architectures may be able to run their libmvec benchmarks as well. This
now allows libmvec benchmarks to be run with `make BENCHSET=bench-math`.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The libmvec benchmarks print a message indicating that a certain CPU
feature is unsupported and exit prematurelyi, which breaks the JSON in
bench.out.
Handle this more elegantly in the bench makefile target by adding
support for an UNSUPPORTED exit status (77) so that bench.out continues
to have output for valid tests.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The AT_SYMLINK_NOFOLLOW emulation ues the default 32 bit stat internal
calls, which fails with EOVERFLOW if the file constains timestamps
beyond 2038.
Checked on i686-linux-gnu.
'get_fast_jitter' is meant to be used purely for performance
purposes. In all cases it's used it should be acceptable to get no
randomness (see default case). An example use case is in setting
jitter for retries between threads at a lock. There is a
performance benefit to having jitter, but only if the jitter can
be generated very quickly and ultimately there is no serious issue
if no jitter is generated.
The implementation generally uses 'HP_TIMING_NOW' iff it is
inlined (avoid any potential syscall paths).
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Copied from gnulib/lib/glob.c in order to fix rhbz 1982608
Also fixes swbz 25659
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
PI_STATIC_AND_HIDDEN indicates whether accesses to internal linkage
variables and hidden visibility variables in a shared object (ld.so)
need dynamic relocations (usually R_*_RELATIVE). PI (position
independent) in the macro name is a misnomer: a code sequence using GOT
is typically position-independent as well, but using dynamic relocations
does not meet the requirement.
Not defining PI_STATIC_AND_HIDDEN is legacy and we expect that all new
ports will define PI_STATIC_AND_HIDDEN. Current ports defining
PI_STATIC_AND_HIDDEN are more than the opposite. Change the configure
default.
No functional change.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
These failures were caught while building glibc master for Fedora
Rawhide which is built with '-mtune=generic -msse2 -mfpmath=sse'
using gcc 11.3 (gcc-11.3.1-2.fc35) on a Cascadelake Intel Xeon
processor.
The new code unrolls the main loop slightly without adding too much
overhead and minimizes the comparisons for the search CHAR.
Geometric Mean of all benchmarks New / Old: 0.755
See email for all results.
Full xcheck passes on x86_64 with and without multiarch enabled.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
The new code unrolls the main loop slightly without adding too much
overhead and minimizes the comparisons for the search CHAR.
Geometric Mean of all benchmarks New / Old: 0.832
See email for all results.
Full xcheck passes on x86_64 with and without multiarch enabled.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
The new code unrolls the main loop slightly without adding too much
overhead and minimizes the comparisons for the search CHAR.
Geometric Mean of all benchmarks New / Old: 0.741
See email for all results.
Full xcheck passes on x86_64 with and without multiarch enabled.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
This is necessary to place the libio vtables into the RELRO segment.
New tests elf/tst-relro-ldso and elf/tst-relro-libc are added to
verify that this is what actually happens.
The new tests fail on ia64 due to lack of (default) RELRO support
inbutils, so they are XFAILed there.
m68k is a non-PI_STATIC_AND_HIDDEN arch which uses a GOT relocation when
loading the address of a jump table. The GOT load may be reordered
before processing R_68K_RELATIVE relocations, leading to an
unrelocated/incorrect jump table, which will cause a crash.
The foolproof approach is to add an optimization barrier (e.g. calling
an non-inlinable function after relative relocations are resolved). That
is non-trivial given the current code structure, so just use the simple
approach to avoid the jump table: handle only the essential reloctions
for RTLD_BOOTSTRAP code.
This is based on Andreas Schwab's patch and fixed ld.so crash on m68k.
Reviewed-by: Adheemrval Zanella <adhemerval.zanella@linaro.org>
