It seems we require texinfo 4.7 for the --plaintext option, so
document that and check for the correct version in configure.
ChangeLog:
2014-12-15 Will Newton <will.newton@linaro.org>
* manual/install.texi: Bump required version of texinfo
to 4.7 from 4.5.
* INSTALL: Regenerated.
* configure.ac: Check for makeinfo version 4.7 and above.
* configure: Regenerated.
In send_vc function at resolv/res_send.c, There is the
following warning on some architectures:
'resplen' may be used uninitialized in this function
[-Wmaybe-uninitialized]
And this is a false positive. This patch suppress the
compiler warning.
Carlos reported failures in conform/ tests in environments where the
compiler used could only find headers in glibc's source and build
trees, not any previously installed headers
<https://sourceware.org/ml/libc-alpha/2014-09/msg00040.html>.
This patch moves nptl/semaphore.h to sysdeps/pthread/semaphore.h so
that it can be found by builds from all glibc subdirectories; it's not
in any way NPTL-specific. (I left the Makefile setting to install
this header in nptl/, but maybe it should move as well - it's just not
clear to me what ifeq ($(subdir),...) conditional should be used to
select the directory to associate the header with for installation
purposes. The path in the toplevel Makefile used for begin-end-check
also remains hardcoded; it's a known todo issue to rework that test to
run in each subdirectory checking the headers installed from that
subdirectory, rather than a separate hardcoded list.)
Tested for x86_64 (testsuite, and that installed stripped shared
libraries are unchanged by the patch). I did *not* test a
configuration such as that in which Carlos saw failure.
* nptl/semaphore.h: Move to ...
* sysdeps/pthread/semaphore.h: ... here.
* Makefile (installed-headers): Change nptl/semaphore.h to
sysdeps/pthread/semaphore.h.
Carlos reported failures in conform/ tests in environments where the
compiler used could only find headers in glibc's source and build
trees, not any previously installed headers
<https://sourceware.org/ml/libc-alpha/2014-09/msg00040.html>.
This patch adds wrappers for two of the affected headers to include/,
which is the normal way to make headers visible when building or
testing in directories other than the one containing the header (I
suppose these headers weren't needed in any such directories except
conform/, or other build or test failures would have resulted). I
believe the same issue applies at least to regexp.h and re_comp.h - we
don't currently have conform/ expectations for those, but when such
expectations are added we'll also need to add header wrappers.
Tested for x86_64 (testsuite, and that installed stripped shared
libraries are unchanged by the patch). I did *not* test a
configuration such as that in which Carlos saw failure.
* include/cpio.h: New file.
* include/fmtmsg.h: Likewise.
Without this, on gcc 4.8.2 the built glibc crashes when memcpy
or memset are invoked, since they call themselves recursively.
See commit 85c2e6110c for the generic inhibit_loop_to_libcall.
ldbl-128ibm uses ldbl-128 e_lgammal_r implementation as is, however some
constants definitions overflows for IBM long double range. This patch
suppress the compiler warnings until the ldbl-128ibm implementation is
fixed.
This patch merges the latest release of gettext into the intl
subdirectory. The initial motivation was to include the plural.y
changes which enable building with bison 3.0, but the majority
of the other changes are merely cosmetic so it seemed like merging
the whole directory was simpler than trying to take it piecemeal.
The merge was done by copying across the latext gettext code and
adding in a few small glibc changes that have been added over the
years that seemed beneficial, as well as a couple of small build
fixes that should be merged back to gettext. I also reverted the
gettext commit:
commit 279b57fc367251666f00e8e2b599b83703451afb
Author: Bruno Haible <bruno@clisp.org>
Date: Fri Jun 14 12:03:49 2002 +0000
Make absolute pathnames inside $LANGUAGE work.
As it caused localedata/tst-setlocale3 to fail and it wasn't clear
that glibc wanted that behaviour.
The merge has dropped many uses of __glibc_likely/unlikely. This is
intentional given that it eases merging. It seems to me that the cost
of continually rewriting these lines when merging and the risk of adding
bugs when doing so outweighs the benefits of using these macros when
code is shared with another project.
Tested with make check on x86_64.
ChangeLog:
2014-12-11 Will Newton <will.newton@linaro.org>
Merge gettext 0.19.3 into intl/.
This involves a number of cosmetic changes to comments
and ANSI function definitions and prototypes throughout
all the files. The gettext copyright header is used but
with the date ranges taken from the glibc copy.
* NEWS: Add gettext merge to 2.21.
* intl/bindtextdom.c: Switch to gettext copyright.
Use ANSI definitions and prototypes.
Use gl_* locking primitives rather than __libc_* ones.
Use __builtin_expect rather than __glibc_likely/unlikely.
* intl/dcgettext.c: Switch to gettext copyright.
Use ANSI definitions and prototypes.
* intl/dcigettext.c: Switch to gettext copyright.
Use ANSI definitions and prototypes.
(INTDIV0_RAISES_SIGFPE): New define.
Use gl_* locking primitives rather than __libc_* ones.
Include eval-plural.h instead of plural-eval.c.
Use __builtin_expect rather than __glibc_likely/unlikely.
* intl/dcngettext.c: Switch to gettext copyright.
Use ANSI definitions and prototypes.
* intl/dgettext.c: Likewise.
* intl/dngettext.c: Likewise.
* intl/plural-eval.c: Renamed to...
* intl/eval-plural.h: ...this.
* intl/explodename.c: Switch to gettext copyright.
Use ANSI definitions and prototypes.
(_nl_explode_name): Use strchr instead of __rawmemchr.
* intl/finddomain.c: Switch to gettext copyright.
Use ANSI definitions and prototypes.
Use gl_* locking primitives rather than __libc_* ones.
(_nl_find_domain): Use malloc rather than alloca for
allocation of temporary locale name.
* intl/gettext.c: Switch to gettext copyright.
Use ANSI definitions and prototypes.
* intl/gettextP.h: Switch to gettext copyright.
Use ANSI definitions and prototypes.
Use gl_* locking primitives rather than __libc_* ones.
* intl/gmo.h: Switch to gettext copyright.
(struct sysdep_string): Move struct segment_pair outside of
struct definition.
* intl/hash-string.c: Use ANSI definitions and prototypes.
* intl/hash-string.h: Switch to gettext copyright.
Use ANSI definitions and prototypes.
* intl/l10nflist.c: Switch to gettext copyright.
Use ANSI definitions and prototypes.
(_nl_normalize_codeset): Avoid integer overflow.
* intl/loadinfo.h: Switch to gettext copyright.
Use ANSI definitions and prototypes.
(LIBINTL_DLL_EXPORTED): New define.
(PATH_SEPARATOR): New define.
* intl/loadmsgcat.c: Switch to gettext copyright.
* intl/localealias.c: Switch to gettext copyright.
Use ANSI definitions and prototypes.
(_nl_expand_alias): Use PATH_SEPARATOR.
* intl/ngettext.c: Switch to gettext copyright.
Use ANSI definitions and prototypes.
* intl/plural-exp.c: Likewise.
* intl/plural-exp.h: Switch to gettext copyright.
Use ANSI definitions and prototypes.
(struct expression): Move definition of enum operator outside
of struct definition.
* intl/plural.c: Regenerate.
* intl/plural.y: Switch to gettext copyright.
Use ANSI definitions and prototypes.
Port to bison 3.0.
* intl/textdomain.c: Switch to gettext copyright.
Use ANSI definitions and prototypes.
Use gl_* locking primitives rather than __libc_* ones.
As previously discussed in
<https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, MIPS (o32)
waitid has build warnings (now errors) because a function is declared
inline but functions with five-argument syscalls cannot be inlined for
MIPS o32.
This patch disables the -Winline warnings for waitid.c using a
MIPS-specific wrapper file. As it's whole-file disabling, there's no
point in using push and pop, so just DIAG_IGNORE_NEEDS_COMMENT is
used.
* sysdeps/unix/sysv/linux/mips/mips32/waitid.c: New file.
Building MIPS sigaction (for ABIs other than o32) fails because of
"'restore_rt' used but never defined", arising from static functions
being defined in asms and referred to from C code. There is no
corresponding -W option for that warning, so this patch uses
-Wno-error for building sigaction.c.
* sysdeps/unix/sysv/linux/mips/mips64/Makefile
[$(subdir) == signal] (CFLAGS-sigaction.c): New variable.
[$(subdir) == nptl] (CFLAGS-sigaction.c): Likewise.
Use of strftime, a C90 function, ends up bringing in wcschr, which is
not a C90 function. Although not a conformance bug (C90 reserves
wcs*), this is still contrary to glibc practice of avoiding relying on
those reservations; this patch arranges for the internal uses to use
__wcschr instead, with wcschr being a weak alias. This is more
complicated than some such patches because of the various IFUNC
definitions of wcschr (which include code redefining libc_hidden_def
in a way that involves creating __GI_wcschr manually and so also needs
to create __GI___wcschr after the change of internal uses to use
__wcschr).
Tested for x86_64 and 32-bit x86 (testsuite, and that disassembly of
installed shared libraries is unchanged by the patch).
2014-12-10 Joseph Myers <joseph@codesourcery.com>
Adhemerval Zanella <azanella@linux.vnet.ibm.com>
[BZ #17634]
* wcsmbs/wcschr.c [!WCSCHR] (wcschr): Define as __wcschr.
Undefine after defining function. Define as weak alias of
__wcschr. Use libc_hidden_weak.
* include/wchar.h (__wcschr): Declare. Use libc_hidden_proto.
* sysdeps/i386/i686/multiarch/wcschr-c.c [IS_IN (libc) && SHARED]
(libc_hidden_def): Also define __GI___wcschr alias.
* sysdeps/i386/i686/multiarch/wcschr.S (wcschr): Rename to
__wcschr and define as weak alias of __wcschr.
* sysdeps/powerpc/power6/wcschr.c [!WCSCHR] (WCSCHR): Define as
__wcschr.
[!WCSCHR] (DEFAULT_WCSCHR): Define.
[DEFAULT_WCSCHR] (__wcschr): Use libc_hidden_def.
[DEFAULT_WCSCHR] (wcschr): Define as weak alias of __wcschr. Use
libc_hidden_weak. Do not use libc_hidden_def.
* sysdeps/powerpc/powerpc32/power4/multiarch/wcschr-ppc32.c
[IS_IN (libc) && SHARED] (libc_hidden_def): Also define
__GI___wcschr alias.
* sysdeps/powerpc/powerpc32/power4/multiarch/wcschr.c
[IS_IN (libc)] (wcschr): Define as macro expanding to
__redirect_wcschr.
[IS_IN (libc)] (__wcschr_ppc): Use __redirect_wcschr in typeof.
[IS_IN (libc)] (__wcschr_power6): Likewise.
[IS_IN (libc)] (__wcschr_power7): Likewise.
[IS_IN (libc)] (__libc_wcschr): New. Define with libc_ifunc
instead of wcschr.
[IS_IN (libc)] (wcschr): Undefine and define as weak alias of
__libc_wcschr.
[!IS_IN (libc)] (libc_hidden_def): Do not undefine and redefine.
* sysdeps/powerpc/powerpc64/multiarch/wcschr.c (wcschr): Rename to
__wcschr and define as weak alias of __wcschr. Use
libc_hidden_builtin_def.
* sysdeps/x86_64/wcschr.S (wcschr): Rename to __wcschr and define
as weak alias of __wcschr. Use libc_hidden_weak.
* time/alt_digit.c (_nl_get_walt_digit): Use __wcschr instead of
wcschr.
* time/era.c (_nl_init_era_entries): Likewise.
* conform/Makefile (test-xfail-ISO/time.h/linknamespace): Remove
variable.
(test-xfail-XPG3/time.h/linknamespace): Likewise.
(test-xfail-XPG4/time.h/linknamespace): Likewise.
A recent change to libio/tst-ftell-active-handler.c (postdating my
last check for warnings on x86) introduced a format warning from a
long int variable used with a %zu format. This patch fixes it by
using %ld for the format to match the variable.
Tested for x86.
* libio/tst-ftell-active-handler.c (do_ftruncate_test): Use %ld
format for long int variable.
Under certain conditions on the size of the array and its items,
qsort() may fall back to an in-place quicksort if it cannot allocate
memory for a temporary array with malloc(). This algorithm is not a
stable sort even if the comparison function is written in the
described manner.
Fixes#10672.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
As discussed starting at
<https://sourceware.org/ml/libc-alpha/2014-11/msg00323.html>, this
patch makes the glibc build use -Werror by default to avoid
accidentally adding new warnings to the build. The configure option
--disable-werror can be used to disable this.
-Wno-error=undef is temporarily used because the build isn't clean
regarding -Wundef warnings. The idea is that once the remaining
-Wundef warnings have been cleaned up (in at least one configuration),
-Wno-error=undef will be removed.
I get a clean build and test on x86_64 (GCC 4.9 branch) with this
patch. The expectation is that this may well break the build for some
other configurations, and people seeing such breakage should make
appropriate fixes to fix or suppress the warnings for their
configurations. In some cases that may involve using pragmas as the
right fix (I think that will be right for the -Wno-inline issue for
MIPS I referred to in
<https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, for
example), in some cases -Wno-error in sysdeps makefiles (__restore_rt
in MIPS sigaction, for example), in some cases substantive fixes for
the warnings.
Note that if, with a view to listing all the warnings then fixing them
all, you just look for "warning:" in output from building and testing
with --disable-werror, you'll see lots of warnings from the linker
about functions such as tmpnam. Those warnings can be ignored - only
compiler warnings are relevant to -Werror, not linker warnings.
* configure.ac (--disable-werror): New configure option.
(enable_werror): New AC_SUBST.
* configure: Regenerated.
* config.make.in (enable-werror): New variable.
* Makeconfig [$(enable-werror) = yes] (+gccwarn): Add -Werror
-Wno-error=undef.
(+gccwarn-c): Do not use -Werror=implicit-function-declaration.
* manual/install.texi (Configuring and compiling): Document
--disable-werror.
* INSTALL: Regenerated.
* debug/Makefile (CFLAGS-tst-chk1.c): Add -Wno-error.
(CFLAGS-tst-chk2.c): Likewise.
(CFLAGS-tst-chk3.c): Likewise.
(CFLAGS-tst-chk4.cc): Likewise.
(CFLAGS-tst-chk5.cc): Likewise.
(CFLAGS-tst-chk6.cc): Likewise.
(CFLAGS-tst-lfschk1.c): Likewise.
(CFLAGS-tst-lfschk2.c): Likewise.
(CFLAGS-tst-lfschk3.c): Likewise.
(CFLAGS-tst-lfschk4.cc): Likewise.
(CFLAGS-tst-lfschk5.cc): Likewise.
(CFLAGS-tst-lfschk6.cc): Likewise.
This patch uses diagnostic control pragmas to disable warnings in
stdio-common/tst-printfsz.c for use of the deprecated
register_printf_function. Because this test is testing printf_size
and printf_size_info, and the latter has the interface expected for
register_printf_function instead of the newer
register_printf_specifier, it seems correct for this test to use the
deprecated interface (wrapping printf_size_info in some way to use
register_printf_specifier would seem an excessive change to what's
tested).
Tested for x86_64.
* stdio-common/tst-printfsz.c: Include <libc-internal.h>.
(main): Disable -Wdeprecated-declarations around calls to
register_printf_function.
This patch uses diagnostic control pragmas to disable some
division-by-zero warnings in stdio-common/tst-unlockedio.c. This is
another test where disabling warnings using diagnostic pragmas seems
appropriate (the warnings are not wildly inappropriate for what the
test deliberately does; the deliberate use of unusual arguments to the
macros being tested means that changing the arguments in a way that
avoids the warning would also unduly perturb what is being tested).
Tested for x86_64.
* stdio-common/tst-unlockedio.c: Include <libc-internal.h>.
(do_test): Disable -Wdiv-by-zero around some calls to
fwrite_unlocked and fread_unlocked.
In <https://sourceware.org/ml/libc-alpha/2014-11/msg00326.html>,
Roland requested internal macros for use of "#pragma GCC diagnostic".
This patch adds such macros and uses them to disable -Wformat warnings
for some code testing GNU scanf %as where GCC expects C99 scanf %a
(several other stdio tests currently use -Wno-format to disable
warnings). Limitations in GCC's diagnostic pragmas require separate
macros before and after the code generating the warnings, rather than
a single macro taking that code as an argument.
The macros are named DIAG_*_NEEDS_COMMENT to emphasise to reviewers
the need for a comment accompanying any use of them (such comments may
however just appear once for several uses of the macros for the same
issue in the same file). I put a GCC version in the arguments to
DIAG_IGNORE_NEEDS_COMMENT, as that seems something useful to grep for
when obsoleting support for an old GCC version and needing to decide
if warning-disabling code is still relevant.
These macros should be usable for replacing existing -Wno-* use in
makefiles (as also suggested by Roland), though I have no plans to
work on that (only on use of the macros in cases where warnings are
currently present that need disabling to use -Werror).
Tested for x86_64.
* include/libc-internal.h (DIAG_PUSH_NEEDS_COMMENT): New macro.
(DIAG_POP_NEEDS_COMMENT): Likewise.
(_DIAG_STR1): Likewise.
(_DIAG_STR): Likewise.
(DIAG_IGNORE_NEEDS_COMMENT): Likewise.
* stdio-common/bug21.c: Include <libc-internal.h>.
(do_test): Disable -Wformat around call to sscanf.
* stdio-common/scanf14.c: Include <libc-internal.h>.
(main): Disable -Wformat around some calls to scanf functions.
Some pthreads functions use getrlimit and gettimeofday, but these
functions are XSI, not base POSIX; this is a namespace issue for
dynamic linking as well as static linking. This patch makes them use
__getrlimit and __gettimeofday instead - the former needed to be newly
exported from libc.so at GLIBC_PRIVATE (and so now needs
libc_hidden_proto / libc_hidden_def), the latter was already exported.
Tested for x86_64 (testsuite, and that disassembly of installed shared
libraries is unchanged by the patch).
[BZ #17682]
* resource/Versions (libc): Add __getrlimit at GLIBC_PRIVATE.
* resource/getrlimit.c (__getrlimit): Use libc_hidden_def.
* sysdeps/mach/hurd/getrlimit.c (__getrlimit): Likewise.
* include/sys/resource.h (__getrlimit): Use libc_hidden_proto.
* nptl/nptl-init.c (__pthread_initialize_minimal_internal): Use
__getrlimit instead of getrlimit.
* nptl/pthread_cond_timedwait.c (__pthread_cond_timedwait): Use
__gettimeofday instead of gettimeofday.
* nptl/pthread_rwlock_timedrdlock.c (pthread_rwlock_timedrdlock):
Likewise.
* nptl/pthread_rwlock_timedwrlock.c (pthread_rwlock_timedwrlock):
Likewise.
* sysdeps/pthread/aio_misc.c (handle_fildes_io): Likewise.
* conform/Makefile (test-xfail-POSIX2008/aio.h/linknamespace):
Remove variable.
(test-xfail-POSIX2008/pthread.h/linknamespace): Likewise.
(test-xfail-POSIX2008/time.h/linknamespace): Likewise.
On 'do_ftell_test' the code:
365 if (test_modes[i].fd_mode != O_WRONLY)
366 {
367 char tmpbuf[data_len];
368
369 rewind (fp);
370
371 while (fgets_func (tmpbuf, sizeof (tmpbuf), fp) && !feof (fp));
The 'data_len' is calculated with wsclen and allocated as 'char'. The
subsequent fgetws will then try to write at most 'data_len' wchar_t
in a buffer with just data_len 'char'. This patch fixes it by
allocating the tmpbuf using 'wchar_t' * data_len bytes.
Some linknamespace tests were failing because of references to
h_errno. References to this symbol should be allowed for XPG4, UNIX98
and XOPEN2K; this patch adds it to the list of allowed data symbols
for those standards. (h_errno was removed in the 2008 edition of
POSIX, so POSIX2008 and XOPEN2K8 references to it are genuine bugs;
fortunately it's not a public data symbol - __h_errno_location is
public, TLS h_errno is GLIBC_PRIVATE - so the symbol can simply be
renamed to __h_errno to fix those bugs without the ABI complications
normally associated with namespace issues for data symbols.)
Tested for x86_64.
* conform/list-header-symbols.pl (%extra_syms): Add h_errno for
XPG4, UNIX98 and XOPEN2K.
* conform/Makefile (test-xfail-XOPEN2K/grp.h/linknamespace):
Remove variable.
(test-xfail-XOPEN2K/pwd.h/linknamespace): Likewise.
POSIX allows applications to switch file handles when a read results
in an end of file. Unset the cached offset at this point so that it
is queried again.
The test case fails to truncate the file when a file is intended to be
opened in w or w+ mode. Add O_TRUNC to fix this. The test still
succeeds with this change.
Currently we seek to end of file if there are unflushed writes or the
stream is in write mode, to get the current offset for writing in
append mode, which is the end of file. The latter case (i.e. stream
is in write mode, but no unflushed writes) is unnecessary since it
will only happen when the stream has just been flushed, in which case
the recorded offset ought to be reliable.
Removing that case lets ftell give the correct offset when it follows
an ftruncate. The latter truncates the file, but does not change the
file position, due to which it is permissible to call ftell without an
intervening fseek call.
Tested on x86_64 to verify that the added test case fails without the
patch and succeeds with it, and that there are no additional
regressions due to it.
[BZ #17647]
* libio/fileops.c (do_ftell): Seek only when there are
unflushed writes.
* libio/wfileops.c (do_ftell_wide): Likewise.
* libio/tst-ftell-active-handler.c (do_ftruncate_test): New
test case.
(do_one_test): Call it.
Some linknamespace tests were failing because of references to
getdate_err. References to this symbol should be allowed for XPG4 and
later XSI standards; it was missing from the whitelist of data
symbols. This patch adds it to that list.
Tested for x86_64.
* conform/list-header-symbols.pl (%extra_syms): Add getdate_err
for XPG4, UNIX98, XOPEN2K and XOPEN2K8.
* conform/Makefile (test-xfail-XOPEN2K/pthread.h/linknamespace):
Remove variable.
(test-xfail-XOPEN2K/time.h/linknamespace): Likewise.
(test-xfail-XOPEN2K8/pthread.h/linknamespace): Likewise.
(test-xfail-XOPEN2K8/time.h/linknamespace): Likewise.
It seems two of the XFAILed linknamespace tests were completely fixed
by some of my recent namespace fixes in combination (although not by
any individual one of those fixes relative to the sources used for
testing each patch, or that individual fix would also have removed the
XFAIL in question). This patch removes those XFAILs that are no
longer needed.
Tested for x86_64.
* conform/Makefile (test-xfail-XOPEN2K/aio.h/linknamespace):
Remove variable.
(test-xfail-XOPEN2K8/aio.h/linknamespace): Likewise.
Various objects in glibc bring in ifaddrs.o (via references to
__netlink_*) and thereby getifaddrs and freeifaddrs, which are not
part of any standard supported by glibc. These should be weak aliases
of __getifaddrs and __freeifaddrs; this patch makes them so.
(The path by which these functions are brought in is Linux-specific,
but it seems less confusing to make all versions of these functions
weak aliases rather than only the Linux-specific versions that
definitely need it.)
Tested for x86_64 (testsuite, and that disassembly of installed shared
libraries is unchanged by this patch).
[BZ #17668]
* inet/ifaddrs.c (getifaddrs): Rename to __getifaddrs and define
as weak alias of __getifaddrs. Use libc_hidden_weak.
(freeifaddrs): Rename to __freeifaddrs and define as weak alias of
__freeifaddrs. Use libc_hidden_weak.
* sysdeps/gnu/ifaddrs.c (getifaddrs): Rename to __getifaddrs and
define as weak alias of __getifaddrs. Use libc_hidden_weak.
(freeifaddrs): Rename to __freeifaddrs and define as weak alias of
__freeifaddrs. Use libc_hidden_weak.
* sysdeps/unix/sysv/linux/ifaddrs.c (getifaddrs): Rename to
__getifaddrs and define as weak alias of __getifaddrs. Use
libc_hidden_weak.
(freeifaddrs): Rename to __freeifaddrs and define as weak alias of
__freeifaddrs. Use libc_hidden_weak.
* conform/Makefile (test-xfail-XOPEN2K/net/if.h/linknamespace):
Remove variable.
(test-xfail-POSIX2008/net/if.h/linknamespace): Likewise.
(test-xfail-XOPEN2K8/net/if.h/linknamespace): Likewise.
Since __libc_start_main may not be in the same 256MB-aligned region as
the function __start, replace use of jal instruction with la/jalr.
This fixes linker issue reported in:
https://sourceware.org/bugzilla/show_bug.cgi?id=17601
[BZ #17601]
* sysdeps/mips/start.S (__start): Use indirect jump to call
__libc_start_main.
This patch fixes a warning in a test that was added since my recent
warning cleanup:
tst-stack4.c: In function 'dso_process':
tst-stack4.c:64:7: warning: format '%i' expects argument of type 'int', but argument 3 has type 'uintptr_t' [-Wformat=]
The original variable has type int then is cast to uintptr_t, and from
there to void *, to pass it to a thread, so reversing the process by
casting to uintptr_t and then to int is natural; this patch does so.
Tested for x86_64.
* nptl/tst-stack4.c (dso_process): Use int not uintptr_t for t.
This patch fixes -Waddress warnings in nptl/tst-mutex1.c from
comparing the address of an object with NULL (ATTR may either be NULL,
or the address of an object when included from other tests, and the
warning arises in the latter case). A macro ATTR_NULL is defined
alongside ATTR and used for the tests.
Tested for x86_64.
* nptl/tst-mutex1.c: Include <stdbool.h>.
[!ATTR] (ATTR_NULL): New macro.
(do_test): Test !ATTR_NULL instead of ATTR != NULL.
* nptl/tst-mutexpi1.c (ATTR_NULL): New macro.
* nptl/tst-mutexpp1.c (ATTR_NULL): New macro.
This patch fixes a "discards qualifiers" warning in
posix/tst-getopt_long1.c. glibc is built with -Wwrite-strings,
meaning a char * cannot be initialized directly with a string
constant; the patch casts the string constants to char *.
Tested for x86_64.
* posix/tst-getopt_long1.c (do_test): Cast elements of argv array
to char *.
For XPG3/XPG4 (defined __USE_XOPEN && !defined __USE_UNIX98), unistd.h
declares many functions that should only be declared for __USE_MISC
(none of them are in XPG3/XPG4): sethostname sethostid getdomainname
setdomainname vhangup revoke profil acct getusershell endusershell
setusershell daemon. The whole block with the [__USE_MISC ||
(__USE_XOPEN && !__USE_UNIX98)] conditional contains only functions
that are not in XPG3/XPG4, so this patch simply changes the
conditional.
Tested for x86_64 (testsuite, and that installed stripped shared
libraries are unchanged by this patch).
[BZ #17665]
* posix/unistd.h [__USE_MISC || (__USE_XOPEN && !__USE_UNIX98)]:
Change conditional to [__USE_MISC].
Various POSIX functions bring in res_init.o, res_hconf.o or
mntent_r.o, which use fgets_unlocked, which is not a POSIX function.
This patch arranges for them to use __fgets_unlocked instead. (The
IS_IN (libc) conditional in rec_hconf.c is needed because that file is
also used in nscd.)
Tested for x86_64 (testsuite, and that disassembly of installed shared
libraries is unchanged by the patch except for an assertion line
number). Note that most of the linknamespace tests that failed
because of fgets_unlocked from the resolver also fail because of other
symbols brought in by the resolver, so the number of XFAILs this
removes is limited. Also note that fgets_unlocked failures for
unistd.h for XPG3/XPG4 showed up that actually unistd.h is declaring
too much for XPG3/XPG4 (bug 17665) - there is no actual need to make
getusershell.c use __fgets_unlocked (at least as regards formal
standards are concerned; maybe it should still change for
namespace-cleanness of _DEFAULT_SOURCE) because the functions there
aren't actually in any of the supported standards; the correct fix for
those failures will be to stop the *usershell* functions appearing in
unistd.h for XPG3/XPG4.
[BZ #17664]
* misc/mntent_r.c (__getmntent_r): Use __fgets_unlocked instead of
fgets_unlocked.
* resolv/res_hconf.c [IS_IN (libc)] (fgets_unlocked): Define to
__fgets_unlocked.
* resolv/res_init.c (__res_vinit): Use __fgets_unlocked instead of
fgets_unlocked.
* conform/Makefile (test-xfail-XPG4/sys/statvfs.h/linknamespace):
Remove variable.
(test-xfail-POSIX/sys/mman.h/linknamespace): Likewise.
(test-xfail-UNIX98/sys/mman.h/linknamespace): Likewise.
(test-xfail-UNIX98/sys/statvfs.h/linknamespace): Likewise.
(test-xfail-XOPEN2K/sys/mman.h/linknamespace): Likewise.
(test-xfail-XOPEN2K/sys/statvfs.h/linknamespace): Likewise.
(test-xfail-POSIX2008/sys/mman.h/linknamespace): Likewise.
(test-xfail-POSIX2008/sys/statvfs.h/linknamespace): Likewise.
(test-xfail-XOPEN2K8/sys/mman.h/linknamespace): Likewise.
(test-xfail-XOPEN2K8/sys/statvfs.h/linknamespace): Likewise.
This patch fixes a warning "tst-unique4lib.cc:17:12: warning: 'b'
defined but not used [-Wunused-variable]". I'm not sure exactly what
aspects of the test are or are not significant for the issue it is
testing for; the patch makes the minimal change of marking the
variable with __attribute__ ((used)).
Tested for x86_64.
* elf/tst-unique4lib.cc (b): Mark with __attribute__ ((used)).
This patch makes the POWER7 optimized strpbrk generic by using
default doubleword stores to zero the hash, instead of VSX
instructions. Performance on POWER7/POWER8 does not change.
This patch makes the POWER7 optimized strcspn generic by using
default doubleword stores to zero the hash, instead of VSX
instructions. Performance on POWER7/POWER8 does not change.
This patch makes the POWER7 optimized strspn generic by using
default doubleword stores to zero the hash, instead of VSX
instructions. Performance on POWER7/POWER8 machines does not changed.
[BZ #17581] The checking chain of unused chunks was terminated by a hash of
the block pointer, which was sometimes confused with the chunk length byte.
The chain is now terminated by a NULL byte.
This patch optimizes strtok and strtok_r for POWERPC64.
A table of 256 characters is created and marked based on
the 'accept' argument and used to check for any occurance on
the input string.Loop unrolling is also used to gain improvements.
Developers creating development packages must take care
to have their static linker DSO link point to the actual
SONAME file. This allows ldconfig to correctly create
the required links for the SONAME. The behaviour is now
more clearly documented in a code comment added by this
patch.
This patch addresses one known caveat in the linknamespace tests: with
this patch they will now only look for definitions of symbols in
relevant libraries, meaning that librt and libpthread are not checked
for ISO C standards, XPG3 and XPG4.
In particular, this means that if __pthread_initialize_minimal is
somehow brought in for one of those standards, the definition from
libc-tls.o will be considered instead of that from libpthread, so
avoiding bringing in lots of other libpthread symbols. This should
address some of the failures reported by Carlos in
<https://sourceware.org/ml/libc-alpha/2014-11/msg00882.html>, where
__pointer_chk_guard_local brought in __pthread_initialize_minimal.
Tested for x86_64. The removal of one XFAIL for XPG4 actually shows
up a header bug (shm_open should not be declared for XPG4 - the
namespace issue was for symbols brought in by shm_open, which is no
longer found at all now librt isn't searched; I've filed bug 17663 for
the header bug, though it would show up eventually anyway in the
course of review of conform/ data against XPG4).
Committed.
* conform/Makefile (linknamespace-symlist-stdlibs-base): New
variable.
(linknamespace-symlist-stdlibs-tests): Likewise.
(tests-special): Append $(linknamespace-symlist-stdlibs-tests)
instead of $(objpfx)symlist-stdlibs.
(linknamespace-libs-isoc): New variable.
(linknamespace-libs): Use $(linknamespace-libs-isoc).
(linknamespace-libs-ISO): New variable.
(linknamespace-libs-ISO99): Likewise.
(linknamespace-libs-ISO11): Likewise.
(linknamespace-libs-XPG3): Likewise.
(linknamespace-libs-XPG4): Likewise.
(linknamespace-libs-POSIX): Likewise.
(linknamespace-libs-UNIX98): Likewise.
(linknamespace-libs-XOPEN2K): Likewise.
(linknamespace-libs-POSIX2008): Likewise.
(linknamespace-libs-XOPEN2K8): Likewise.
($(objpfx)symlist-stdlibs): Replace by
$(linknamespace-symlist-stdlibs-tests). Use
$(linknamespace-libs-$*) as set of libraries.
($(linknamespace-header-tests)): Update dependencies. Use
$(objpfx)symlist-stdlibs-$$std for --libsyms argument.
(test-xfail-XPG4/sys/mman.h/linknamespace): Remove.
* conform/linknamespace.pl: Remove comment about considering
definitions of symbols from irrelevant libraries.
This patch changes _dl_allocate_tls_init to resize DTV if the current DTV
isn't big enough. Tested on X86-64, x32 and ia32.
[BZ #13862]
* elf/dl-tls.c: Include <atomic.h>.
(oom): Remove #ifdef SHARED/#endif.
(_dl_static_dtv, _dl_initial_dtv): Moved before ...
(_dl_resize_dtv): This. Extracted from _dl_update_slotinfo.
(_dl_allocate_tls_init): Resize DTV if the current DTV isn't
big enough.
(_dl_update_slotinfo): Call _dl_resize_dtv to resize DTV.
* nptl/Makefile (tests): Add tst-stack4.
(modules-names): Add tst-stack4mod.
($(objpfx)tst-stack4): New.
(tst-stack4mod.sos): Likewise.
($(objpfx)tst-stack4.out): Likewise.
($(tst-stack4mod.sos)): Likewise.
(clean): Likewise.
* nptl/tst-stack4.c: New file.
* nptl/tst-stack4mod.c: Likewise.
misc/tst-pselect.c uses the deprecated sigblock interface, resulting
in "tst-pselect.c:42:3: warning: 'sigblock' is deprecated (declared at
../signal/signal.h:189) [-Wdeprecated-declarations]". The choice of
sigblock rather than sigprocmask has nothing to do with what this test
is testing, so this patch changes it to use sigprocmask to avoid the
warning.
Tested for x86_64.
* misc/tst-pselect.c (do_test): Use sigprocmask instead of
sigblock.
This patch fixes a warning "variable 'wc' set but not used" in
libio/bug-ungetwc1.c.
The test didn't verify much about the results of the functions it
called. This patch makes it check the result of getwc (thereby fixing
the warning), check end of file does not arrive too late in the getwc
loop, and check EOF is no longer set after ungetwc.
Tested for x86_64.
* libio/bug-ungetwc1.c (do_test): Verify results of getwc and
feof.
This patch fixes a "set but not used" warning from
dlfcn/failtestmod.c. A variable is used only to store the return
value from dlsym. As I understand this test, the point is simply to
do a sequence of load / unload operations in a loop, and all that
matters here is that dlsym gets called and returns without crashing,
not what its return value is. So this patch removes the assignment to
a variable.
Tested for x86_64.
* dlfcn/failtestmod.c (constr): Do not store result of dlsym in a
variable.
gcc now warns when the arguments to memset may have been accidentally
transposed (i.e. length set to zero instead of the byte), so we don't
need that bit of the code in glibc headers anymore.
Tested on x86_64. Coe generated by gcc 4.8 is identical with or
without the patch. I also tested gcc master, which does not result in
any new failures. It does fail quite a few FORTIFY_SOURCE tests, but
those failures are not due to this patch.
Testing for 32-bit x86 shows up warnings in
stdio-common/tst-fmemopen.c where off_t values are passed to %zu
printf formats. Since the values are in messages relating to function
calls where the relevant argument is of type size_t, it seems most
appropriate to cast explicitly to size_t when passing to printf, which
this patch does.
Tested for 32-bit x86.
* stdio-common/tst-fmemopen.c (do_test): Cast st_size values to
size_t for %zu format.
Testing for 32-bit x86 shows up a warning "tst-nss-test1.c:25:3:
warning: format '%ju' expects argument of type 'uintmax_t', but
argument 2 has type 'int' [-Wformat=]". The argument is a difference
of two pointers, a signed quantity of type ptrdiff_t for which the
right format is %td; this patch makes this test use that format.
Tested for 32-bit x86.
* nss/tst-nss-test1.c (do_test): Use %td printf format for pointer
difference, not %ju.
This patch avoids warnings for unused results of setuid and setgid in
nscd/connections.c using an ignore_value macro along the lines
suggested by Paul in
<https://sourceware.org/ml/libc-alpha/2014-11/msg00733.html>.
Tested for x86_64.
* include/libc-internal.h (ignore_value): New macro.
* nscd/connections.c (restart): Wrap calls to setuid and setgid
with ignore_value.
This patch fixes
../sysdeps/mips/__longjmp.c:27:1: warning: function declaration isn't a prototype [-Wstrict-prototypes]
which arose I think from the MIPS16 changes (renaming the function to
____longjmp with an alias __longjmp, so a prior header prototype for
__longjmp no longer sufficed to prevent a warning). I've made the
function use a prototype definition, which is what we want for all
function definitions in glibc anyway.
Tested for MIPS.
* sysdeps/mips/__longjmp.c (____longjmp): Use prototype
definition.
This patch fixes "../sysdeps/nptl/pthread.h:670:26: warning:
initialization discards 'volatile' qualifier from pointer target type"
arising when building nptl/tst-cancel-self-cancelstate.c. The problem
is passing a volatile int * to a macro expecting void *; the patch
adds an explicit cast.
Tested for x86_64.
* nptl/tst-cancel-self-cancelstate.c (do_test): Cast argument of
pthread_cleanup_push to void *.
This patch fixes a warning
../include/features.h:328:4: warning: #warning _FORTIFY_SOURCE requires compiling with optimization (-O) [-Wcpp]
seen when building for ARM. This warning comes from libc-do-syscall.S
being built for nscd: the nscd build uses _FORTIFY_SOURCE, while .S
files aren't built with -O, and the combination produces a warning.
As _FORTIFY_SOURCE doesn't do anything for .S files, undefining it in
libc-do-syscall.S seems the simplest solution.
Tested for ARM.
* sysdeps/unix/sysv/linux/arm/libc-do-syscall.S (_FORTIFY_SOURCE):
Undefine.
This patch fixes bugs in ldbl-128ibm frexpl for 32-bit systems shown
up by warnings:
../sysdeps/ieee754/ldbl-128ibm/s_frexpl.c:82:4: warning: left shift count >= width of type
../sysdeps/ieee754/ldbl-128ibm/s_frexpl.c:129:5: warning: left shift count >= width of type
This did in fact show up in test-ldouble.out (alongside all the other
problems there ... maybe we should again consider running the libm
tests at finer granularity from the makefiles) as already covered by
the testsuite after the previous patch that fixed these bugs for
64-bit systems. The fix is simply using 1LL instead of 1L when
shifting by 52.
Tested for powerpc32 (soft float).
[BZ #16619]
[BZ #16740]
* sysdeps/ieee754/ldbl-128ibm/s_frexpl.c (__frexpl): Use 1LL << 52
instead of 1L << 52.
This patch fixes "set but not used" warnings in the tests
libio/bug-rewind.c and libio/bug-rewind2.c by checking the return
values from fwscanf and making the tests fail if those values aren't
as expected.
Tested for x86_64.
* libio/bug-rewind.c (do_test): Check fwscanf return values.
* libio/bug-rewind2.c (do_test): Likewise.
TEST_IFUNC is only tested in two headers, bench-string.h and
test-string.h, after it gets defined by those headers, and it never
gets undefined.
Thus no defines of TEST_IFUNC are needed, and the *-ifunc.c tests that
just define TEST_IFUNC and include other tests are also redundant, as
is the code to remove $(tests-ifunc) and $(xtests-ifunc) conditionally
from tests and xtests. This patch removes the useless defines and
tests of TEST_IFUNC and the associated useless tests and makefile
code. It thereby fixes a series of warnings
"../string/test-string.h:21:0: warning: "TEST_IFUNC" redefined" where
test-string.h defines TEST_IFUNC to empty, other files define it to 1
and this produces warnings.
Tested for x86_64.
* debug/test-stpcpy_chk-ifunc.c: Remove file.
* debug/test-strcpy_chk-ifunc.c: Likewise.
* wcsmbs/test-wcschr-ifunc.c: Likewise.
* wcsmbs/test-wcscmp-ifunc.c: Likewise.
* wcsmbs/test-wcscpy-ifunc.c: Likewise.
* wcsmbs/test-wcslen-ifunc.c: Likewise.
* wcsmbs/test-wcsrchr-ifunc.c: Likewise.
* wcsmbs/test-wmemcmp-ifunc.c: Likewise.
* Rules [$(multi-arch) = no] (tests): Do not filter out
$(tests-ifunc).
[$(multi-arch) = no] (xtests): Do not filter out $(xtests-ifunc).
* debug/Makefile (tests-ifunc): Remove variable.
(tests): Do not add $(tests-ifunc).
* wcsmbs/Makefile (tests-ifunc): Remove variable.
(tests): Do not add $(tests-ifunc).
* benchtests/bench-string.h (TEST_IFUNC): Remove macro.
[TEST_IFUNC]: Remove conditionals.
* string/test-string.h (TEST_IFUNC): Remove macro.
[TEST_IFUNC]: Remove conditionals.
string/test-strchr.c is used for both wide and narrow string testing,
but produces a series of warnings for wide string testing because of
hardcoded use of narrow characters in the function check1. This patch
fixes that function to use macros abstracting away the wide / narrow
string choice, adding a new such macro to handle the string and
character constants.
Tested for x86_64.
* string/test-strchr.c [!WIDE] (L): New macro.
[WIDE] (L): Likewise.
(check1): Use CHAR instead of char. Use L on string and character
constants.
On powerpc, atomic_exchange_and_add is implemented without any
barriers. This patchs adds the missing instruction and memory barrier
for acquire and release semanthics.
This patch fixes a "set but not used" warning in setjmp/jmpbug.c. A
variable is used only to store the result of alloca. A cast to void
is added to avoid the warning, and the variable is made volatile to
ensure the call to alloca isn't optimized away for being unused.
Tested for x86_64.
* setjmp/jmpbug.c (test): Make foo volatile and cast it to
void.
This patch fixes warnings of the form "tst-printf-round.c:202:17:
warning: passing argument 3 of 'test_hex_in_one_mode' discards 'const'
qualifier from pointer target type", by adding an extra const to that
argument (so that after array-to-pointer conversion it's const char
*const *).
Tested for x86_64.
* stdio-common/tst-printf-round.c (test_hex_in_one_mode): Make
third argument const.
* posix/fnmatch_loop.c (FCT): Use a scalar not a one-item array.
This works around a bug with x86-64 GCC 4.9.2 and earlier
where 'gcc -O2 -Wmaybe-uninitialized' incorrectly complains
"../locale/weightwc.h:93:7: warning: '*((void *)&str+4)' may be
used uninitialized in this function [-Wmaybe-uninitialized]".
This patch fixes a "set but not used" warning in posix/bug-regex31.c.
A variable res stored an indication of whether the test behaved as
expected, but was then ignored and the test returned 0 unconditionally
(as an mtrace test, the auxiliary test for leaks could still have
failed if that bug was present). This patch makes the test return
res.
Tested for x86_64.
* posix/bug-regex31.c (main): Return RES not 0.
perror, an ISO C function, uses fileno, which is not an ISO C
function. This patch makes it use __fileno instead. (The nearby call
to fdopen is not a problem because that's #defined to _IO_new_fdopen.)
Tested for x86_64 (testsuite, and that installed stripped shared
libraries are unchanged by this patch).
[BZ #17633]
* stdio-common/perror.c (perror): Call __fileno instead of fileno.
* conform/Makefile (test-xfail-ISO/stdio.h/linknamespace): Remove
variable.
(test-xfail-ISO99/stdio.h/linknamespace): Likewise.
(test-xfail-ISO11/stdio.h/linknamespace): Likewise.
This change is only useful for the conformance tests since the headers
changed are not installed. The conformance tests fail due to IS_IN
not being defined, so wrap it with a check to make sure that _ISOMAC
is defined.
* include/bits/stdlib-float.h: Use IS_IN only if _ISOMAC is
defined.
* include/mqueue.h: Likewise.
* include/stdlib.h: Likewise.
Ignoring IS_IN_build, which has a different purpose altogether, this
patch removes the last bit of IS_IN_* macro definitions. Now barring
NOT_IN_libc, all cases use the IN_MODULE scheme.
Generated code unchanged on x86_64.
* extra-lib.mk (CPPFLAGS-$(lib)): Remove IS_IN_$(lib).
Replace with IS_IN (ldconfig). No change in generated code.
* elf/Makefile (CFLAGS-ldconfig.c): Remove definition of
IS_IN_ldconfig.
* sysdeps/unix/sysv/linux/x86_64/dl-procinfo.c: Use IS_IN.
* sysdeps/unix/sysv/linux/x86_64/dl-procinfo.h: Likewise.
Replace it with IS_IN (libc) and remove the one place that it
is defined in. The generated code remains unchanged on x86_64.
* include/shlib-compat.h [!NOT_IN_libc]: Remove.
* nss/nss_files/files-parse.c (IS_IN_libc): Replace with
IS_IN (libc).
Make sure that all instances where NOT_IN_libc is defined also defines
IN_MODULE to facilitate removal NOT_IN_libc in future passes.
Verified that the generated code is unchanged on x86_64.
* elf/Makefile (libof-sotruss-lib): Set as extramodules.
Replace with IS_IN and IS_IN_LIB macros instead. This change results
in a change in generated code, because it fixes a subtle bug. The bug
was introduced when systemtap probes were added to lowlevellock.h,
which resulted in stap-probe.h being included in a number of places.
stap-probe.h always defines IN_LIB, which breaks a check in errno.h
and netdb.h since they rely on that macro to decide whether to
implement an internal version of a declaration or an external one.
The components that see a code change due to this are:
iconv_prog
libmemusage.so
libpcprofile.so
libSegFault.so
libutil.so.1
locale
localedef
nscd
All other built components (i.e. libc, libpthread, etc.) remain
unchanged by this on x86_64.
* elf/Makefile (CPPFLAGS-.os): Remove IN_LIB.
* elf/rtld-Rules (rtld-CPPFLAGS): Likewise.
* extra-lib.mk (CPPFLAGS-$(lib)): Likewise.
* include/libc-symbols.h (IS_IN_LIB): New macro.
* include/errno.h: Use IS_IN_LIB instead of IN_LIB.
* include/netdb.h: Likewise.
* include/stap-probe.h: Remove all uses of IN_LIB.
Define MODULE_NAME in the build command and define IN_MODULE using
MODULE_NAME. Verified that the generated code is unchanged on x86_64.
* Makeconfig (module-cppflags-real): Define MODULE_NAME
instead of IN_MODULE.
* include/libc-symbols.h (IN_MODULE): Define using
MODULE_NAME.
(PASTE_NAME, PASTE_NAME1): New macros.
* include/stap-probe.h (LIBC_PROBE_1): Use MODULE_NAME instead
of IN_LIB.
(STAP_PROBE_ASM): Likewise.
dlopening libraries from a static program would dlopen libc.so,
which thus needs its own initialization, done in posixland_init,
which was missing initializing RPCs so far.
ChangeLog:
2014-11-23 Samuel Thibault <samuel.thibault@ens-lyon.org>
* sysdeps/mach/hurd/i386/init-first.c (posixland_init): Call
__mach_init in dlopened libc.
GCC marked OABI obsolete in 4.7 and dropped it in 4.8. So the number
of people this is catching is shrinking every day. At this point,
it's not terribly useful, so just drop it.
This patch reformats the inline-asm in elf_machine_load_address so it is
easier to change only part of the inline-asm. That is using string
concatenating instead of string continuation.
Also document why this inline-asm works - it depends on the 32bit
relocation being resolved at link time.
ChangeLog:
2014-11-21 Will Newton <will.newton@linaro.org>
Andrew Pinski <andrew.pinski@caviumnetworks.com>
* sysdeps/aarch64/dl-machine.h (elf_machine_load_address):
Refactor inline-asm. Also add comment.
Using the macros for ELF types is required for adding ILP32 support.
In the standard AArch64 configuration this makes no difference to
the types used.
ChangeLog:
2014-11-21 Will Newton <will.newton@linaro.org>
Andrew Pinski <andrew.pinski@caviumnetworks.com>
* sysdeps/aarch64/bits/link.h (la_aarch64_gnu_pltenter): Use
ElfW macro instead of hardcoded Elf64 types.
(la_aarch64_gnu_pltenter): Likewise.
* sysdeps/aarch64/dl-machine.h
(elf_machine_runtime_setup): Use ElfW(Addr).
The latest version of the binutils ELF header defines a new set of
dynamic relocations for ILP32 and renames some to make the naming
more uniform.
ChangeLog:
2014-11-21 Will Newton <will.newton@linaro.org>
Andrew Pinski <andrew.pinski@caviumnetworks.com>
* elf/elf.h (R_AARCH64_P32_ABS32, R_AARCH64_P32_COPY,
R_AARCH64_P32_GLOB_DAT, R_AARCH64_P32_JUMP_SLOT,
R_AARCH64_P32_RELATIVE, R_AARCH64_P32_TLS_DTPMOD,
R_AARCH64_P32_TLS_DTPREL, R_AARCH64_P32_TLS_TPREL,
R_AARCH64_P32_TLSDESC, R_AARCH64_P32_IRELATIVE): Define.
(R_AARCH64_TLS_DTPMOD64): Rename to ..
(R_AARCH64_TLS_DTPMOD): This.
(R_AARCH64_TLS_DTPREL64): Rename to ...
(R_AARCH64_TLS_DTPREL): This.
(R_AARCH64_TLS_TPREL64): Rename to ...
(R_AARCH64_TLS_TPREL): This.
* sysdeps/aarch64/dl-machine.h (elf_machine_type_class): Update
R_AARCH64_TLS_DTPMOD64, R_AARCH64_TLS_DTPREL64, and
R_AARCH64_TLS_TPREL64.
(elf_machine_rela): Likewise.
This should only happen if the domain to search is the root,
represented as "." rather than by an empty string. Skipping it here
prevents libc_res_nquerydomain from duplicating the trailing dot,
which would cause the domain name compression to fail.
for ChangeLog
[BZ #16469]
* resolv/res_query.c (__libc_res_nsearch): Skip leading dot in
search domain names.
If we drop it here, we will fail to detect a duplicate trailing dot
later on. Retaining, OTOH, has no ill effects whatsoever, and it even
saves us the trouble of copying the domain name minus the trailing
dot, like we used to do.
for ChangeLog
[BZ #16469]
* NEWS: Update.
* resolv/res_query.c (__libc_res_nquerydomain): Retain
trailing dot.
* posix/tst-getaddrinfo5.c: New.
* posix/Makefile (tests): Add it.
nss_db uses nss_files code for services, but a continue on protocol
mismatch that doesn't affect nss_files skipped the code that advanced
to the next db entry. Any one of these changes would suffice to fix
it, but fixing both makes them both safer to reuse elsewhere.
for ChangeLog
[BZ #14498]
* NEWS: Fixed.
* nss/nss_db/db-XXX.c (_nss_db_get##name##_r): Update hidx
after parsing line but before break_if_match.
* nss/nss_files/files-service (DB_LOOKUP): Don't "continue;"
if there is a protocol mismatch.
for ChangeLog
* sysdeps/posix/ctermid.c (ctermid): Return a pointer to a
string literal if not passed a buffer.
* manual/job.texi (ctermid): Update reasoning, note deviation
from posix, suggest mtasurace when not passed a buffer, for
future non-preliminary safety notes.
for ChangeLog
* manual/Makefile ($(objpfx)stamp-summary): Require
check-safety.sh to pass.
* manual/check-safety.sh: Wish for verification that every
@deftypefn and @deftypefun is followed by a @safety remark.
This sets __HAVE_64B_ATOMICS if provided. It also sets
USE_ATOMIC_COMPILER_BUILTINS to true if the existing atomic ops use the
__atomic* builtins (aarch64, mips partially) or if this has been
tested (x86_64); otherwise, this is set to false so that C11 atomics will
be based on the existing atomic operations.
The function wordexp() fails to properly handle the WRDE_NOCMD
flag when processing arithmetic inputs in the form of "$((... ``))"
where "..." can be anything valid. The backticks in the arithmetic
epxression are evaluated by in a shell even if WRDE_NOCMD forbade
command substitution. This allows an attacker to attempt to pass
dangerous commands via constructs of the above form, and bypass
the WRDE_NOCMD flag. This patch fixes this by checking for WRDE_NOCMD
in exec_comm(), the only place that can execute a shell. All other
checks for WRDE_NOCMD are superfluous and removed.
We expand the testsuite and add 3 new regression tests of roughly
the same form but with a couple of nested levels.
On top of the 3 new tests we add fork validation to the WRDE_NOCMD
testing. If any forks are detected during the execution of a wordexp()
call with WRDE_NOCMD, the test is marked as failed. This is slightly
heuristic since vfork might be used in the future, but it provides a
higher level of assurance that no shells were executed as part of
command substitution with WRDE_NOCMD in effect. In addition it doesn't
require libpthread or libdl, instead we use the public implementation
namespace function __register_atfork (already part of the public ABI
for libpthread).
Tested on x86_64 with no regressions.
Remove libc-modules.h from the tree and auto-generate it from
soversions.i and the list of modules in the built-modules variable
defined in Makeconfig. Macros generated have increasing numbered
values, with built-modules having lower values starting from 1,
following which a separator value LIBS_BEGIN is added and then finally
the library names from soversions.i are appended to the list. This
allows us to conveniently differentiate between the versioned
libraries and other built modules, which is needed in errno.h and
netdb.h to decide whether to use an internal symbol or an external
one.
Verified that generated code remains unchanged on x86_64.
* Makeconfig (built-modules): List non-library modules to be
built.
(module-cppflags): Include libc-modules.h for
everything except shlib-versions.v.i.
(CPPFLAGS): Use it.
(before-compile): Add libc-modules.h.
($(common-objpfx)libc-modules.h,
$(common-objpfx)libc-modules.stmp): New targets.
(common-generated): Add libc-modules.h and libc-modules.stmp.
($(common-objpfx)Versions.v.i): Depend on libc-modules.h.
* include/libc-symbols.h: Don't include libc-modules.h.
* include/libc-modules.h: Remove file.
* scripts/gen-libc-modules.awk: New script to generate
libc-modules.h.
* sysdeps/unix/Makefile ($(common-objpfx)sysd-syscalls):
Depend on libc-modules.stmp.
The current scheme to identify which module a translation unit is
built in depends on defining multiple macros IS_IN_* and also defining
NOT_IN_libc if we're building a non-libc module. In addition, there
is an IN_LIB macro that does effectively the same thing, but for
different modules (notably the systemtap probes). This macro scheme
unifies both ideas to use just one macro IN_MODULE and assign it a
value depending on the module it is being built into. If the module
is not defined, it defaults to MODULE_libc.
Patches that follow will replace uses of IS_IN_* variables with the
IS_IN() macro. libc-symbols.h has been converted already to give an
example of how such a transition will look.
Verified that there are no relevant binary changes. One source change
that will crop up repeatedly is that of nscd_stat, since it uses the
build timestamp as a constant in its logic.
* Makeconfig (in-module): Get value of libof set for the
translation unit.
(CPPFLAGS): Use $(in-module).
* Makerules: Don't suffix routine names for nonlib.
* include/libc-modules.h: New file.
* include/libc-symbols.h: Include libc-modules.h
(IS_IN): New macro to replace IS_IN_* macros.
* elf/Makefile: Set libof-* for each routine.
* elf/rtld-Rules: Likewise.
* extra-modules.mk: Likewise.
* iconv/Makefile: Likewise.
* iconvdata/Makefile: Likewise.
* locale/Makefile: Likewise.
* malloc/Makefile: Likewise.
* nss/Makefile: Likewise.
* sysdeps/gnu/Makefile: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile: Likewise.
* sysdeps/unix/sysv/linux/Makefile: Likewise.
* sysdeps/s390/s390-64/Makefile: Likewise.
* nscd/Makefile: Set libof-* for each routine. Set CFLAGS and
CPPFLAGS for nscd instead of nonlib.
libm uses symbols mpone and mptwo for internal purposes. This patch
moves them to the implementation namespace (__mpone and __mptwo).
Tested for x86_64 (testsuite, and that installed stripped shared
libraries are unchanged by the patch).
[BZ #17616]
* sysdeps/ieee754/dbl-64/mpa.c (mpone): Rename to __mpone.
(mptwo): Rename to __mptwo.
(__inv): Use __mptwo instead of mptwo.
* sysdeps/ieee754/dbl-64/mpa.h (mpone): Rename to __mpone.
(mptwo): Rename to __mptwo.
* sysdeps/ieee754/dbl-64/mpatan.c (__mpatan): Use __mpone instead
of mpone and __mptwo instead of mptwo.
* sysdeps/ieee754/dbl-64/mpatan2.c (__mpatan2): Use __mpone
instead of mpone.
* sysdeps/ieee754/dbl-64/mpexp.c (__mpexp): Likewise.
* sysdeps/ieee754/dbl-64/mplog.c (__mplog): Likewise.
* sysdeps/ieee754/dbl-64/sincos32.c (__c32): Use __mpone instead
of mpone and __mptwo instead of mptwo.
(__mpranred): Use __mpone instead of mpone.
* conform/Makefile (test-xfail-ISO/math.h/linknamespace): Remove
variable.
(test-xfail-ISO99/complex.h/linknamespace): Likewise.
(test-xfail-ISO99/math.h/linknamespace): Likewise.
(test-xfail-ISO99/tgmath.h/linknamespace): Likewise.
(test-xfail-ISO11/complex.h/linknamespace): Likewise.
(test-xfail-ISO11/math.h/linknamespace): Likewise.
(test-xfail-ISO11/tgmath.h/linknamespace): Likewise.
(test-xfail-XPG3/math.h/linknamespace): Likewise.
(test-xfail-XPG4/math.h/linknamespace): Likewise.
(test-xfail-POSIX/math.h/linknamespace): Likewise.
(test-xfail-UNIX98/math.h/linknamespace): Likewise.
(test-xfail-XOPEN2K/complex.h/linknamespace): Likewise.
(test-xfail-XOPEN2K/math.h/linknamespace): Likewise.
(test-xfail-XOPEN2K/tgmath.h/linknamespace): Likewise.
(test-xfail-POSIX2008/complex.h/linknamespace): Likewise.
(test-xfail-POSIX2008/math.h/linknamespace): Likewise.
(test-xfail-POSIX2008/tgmath.h/linknamespace): Likewise.
(test-xfail-XOPEN2K8/complex.h/linknamespace): Likewise.
(test-xfail-XOPEN2K8/math.h/linknamespace): Likewise.
(test-xfail-XOPEN2K8/tgmath.h/linknamespace): Likewise.
2014-11-18 Tom de Vries <tom@codesoucery.com>
* manual/signal.texi (Primitives Interrupted by Signals): In section,
replace BSD Handler xref with BSD Signal Handling.
Commit 5c0508a318 broke the Alpha
port, as the extra parenthesis got in the way of some token pasting
that we were doing in a redefined raw unpack macro.
Avoid this situation in the future by not attempting to redefine a
basic macro, but rather work from the outermost public interface.
The compiler does in fact see through the added indirection.
* sysdeps/alpha/soft-fp/local-soft-fp.h (_FP_UNPACK_RAW_2): Remove.
(_FP_PACK_RAW_2): Remove.
(AXP_DECL_RETURN_Q): Rename from FP_DECL_RETURN, use _FP_UNION_Q.
(AXP_RETURN_Q): Rename from FP_RETURN, use _FP_UNION_Q.
(AXP_UNPACK_RAW_Q, AXP_UNPACK_SEMIRAW_Q, AXP_UNPACK_Q): New.
(AXP_PACK_RAW_Q, AXP_PACK_SEMIRAW_Q, AXP_PACK_Q): New.
* sysdeps/alpha/soft-fp/ots_add.c (_OtsAddX): Update to match.
* sysdeps/alpha/soft-fp/ots_cmp.c (internal_equality): Likewise.
* sysdeps/alpha/soft-fp/ots_cmpe.c (internal_compare): Likewise.
* sysdeps/alpha/soft-fp/ots_cvtqux.c (_OtsCvtQUX): Likewise.
* sysdeps/alpha/soft-fp/ots_cvtqx.c (_OtsCvtQX): Likewise.
* sysdeps/alpha/soft-fp/ots_cvttx.c (_OtsConvertFloatTX): Likewise.
* sysdeps/alpha/soft-fp/ots_cvtxq.c (_OtsCvtXQ): Likewise.
* sysdeps/alpha/soft-fp/ots_cvtxt.c (_OtsConvertFloatXT): Likewise.
* sysdeps/alpha/soft-fp/ots_div.c (_OtsDivX): Likewise.
* sysdeps/alpha/soft-fp/ots_mul.c (_OtsMulX): Likewise.
* sysdeps/alpha/soft-fp/ots_nintxq.c (_OtsNintXQ): Likewise.
* sysdeps/alpha/soft-fp/ots_sub.c (_OtsSubX): Likewise.
This patch removes a conditional on __GNUC_PREREQ (4, 6) in x86_64
code.
Tested for x86_64 that installed shared libraries are unchanged by
this patch. Committed (I think this file reasonably comes under math
maintainership).
* sysdeps/x86_64/fpu/dla.h [__FMA4__ && __GNUC_PREREQ (4, 6)]
(DLA_FMS): Make definition conditional only on [__FMA4__].
[__FMA4__ && !__GNUC_PREREQ (4, 6)] (DLA_FMS): Remove conditional
definition.
This patch removes conditionals in ARM code on __GNUC_PREREQ(4,4),
which were already obsolete even before the move from 4.4 to 4.6 as
minimum GCC version for building glibc.
Tested for ARM that installed shared libraries are unchanged by this
patch.
* sysdeps/arm/sysdep.h [PROF && __GNUC_PREREQ(4,4)] (CALL_MCOUNT):
Make definition conditional only on [PROF].
[PROF && !__GNUC_PREREQ(4,4)] (CALL_MCOUNT): Remove conditional
definition.
[__GNUC_PREREQ(4,4)] (mcount): Make definition unconditional.
[!__GNUC_PREREQ(4,4)] (mcount): Remove conditional definition.
This patch makes the installed signal.h declare __sigpause only when
necessary (when a macro definition of sigpause makes use of
__sigpause), rather than unconditionally. This fixes false positives
in the linknamespace tests by making it visible to those tests that no
use of ISO C functionality will actually bring in the definition of
__sigpause and so bring in the other symbols defined in the same
object. There is no bug filed in Bugzilla because this is fixing
false positives rather than any user-visible bug.
Tested for x86_64 (testsuite, and that installed stripped shared
libraries are unchanged by this patch).
* signal/signal.h (__sigpause): Only declare if [__USE_XOPEN &&
!__GNUC__].
* include/signal.h (__sigpause): Move declaration above call to
libc_hidden_proto.
* conform/Makefile (test-xfail-ISO/signal.h/linknamespace): Remove
variable.
(test-xfail-ISO99/signal.h/linknamespace): Likewise.
(test-xfail-ISO11/signal.h/linknamespace): Likewise.
As discussed in the thread starting at
<https://sourceware.org/ml/libc-alpha/2014-10/msg00792.html>, and
continuing into November, this patch increases the minimum GCC version
for building glibc to 4.6 (there seemed to be no clear consensus for
4.7). In particular, this allows us to use #pragma GCC diagnostic for
fine-grained warning control with -Werror (subject to establishing a
suitable policy for that use). The documentation has a statement, as
requested, about the most recent GCC version tested for building
glibc, and I've updated <https://sourceware.org/glibc/wiki/Release> to
refer to updating that statement. A NEWS entry is added for this
change, although previous such changes didn't get them.
Tested for x86_64 (testsuite, and that installed shared libraries are
unchanged by this patch).
* configure.ac (libc_cv_compiler_ok): Require GCC 4.6 or later.
* configure: Regenerated.
* manual/install.texi (Tools for Compilation): Document a
requirement of GCC 4.6 or later and that GCC 4.9 is the newest
compiler verified to work.
* INSTALL: Regenerated.
This patch fixes the build of C mempcpy and stpcpy by disabling the
redirection to __mempcpy and __stpcpy asm names if
NO_MEMPCPY_STPCPY_REDIRECT is defined, and defining that macro in the
relevant source files.
Tested for powerpc32 that the build is fixed.
* include/string.h [NO_MEMPCPY_STPCPY_REDIRECT] (mempcpy): Do not
redeclare with asm name.
[NO_MEMPCPY_STPCPY_REDIRECT] (stpcpy): Likewise.
* string/mempcpy.c (NO_MEMPCPY_STPCPY_REDIRECT): Define before
including <string.h>.
* string/stpcpy.c (NO_MEMPCPY_STPCPY_REDIRECT): Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/mempcpy.c
[!NOT_IN_libc] (NO_MEMPCPY_STPCPY_REDIRECT): Likewise.
* sysdeps/powerpc/powerpc64/multiarch/mempcpy.c
[!NOT_IN_libc] (NO_MEMPCPY_STPCPY_REDIRECT): Likewise.
* sysdeps/powerpc/powerpc64/multiarch/stpcpy.c
[SHARED && !NOT_IN_libc] (NO_MEMPCPY_STPCPY_REDIRECT): Likewise.
This patch fixes those warnings by using a prototype definition for
__strtol.
Tested for x86_64 that stripped installed shared libraries are
unchanged by this patch.
* stdlib/strtol.c (__strtol): Use prototype definition.
For 32-bit platforms, strtoll and strtoull are strong symbols in libc,
but they are not in ISO C90, and are brought in by references to
__strtoll_internal / __strtoull_internal from scanf. (For 64-bit
platforms, they are properly weak.) This patch makes them weak for
32-bit (it has a side-effect of making other symbols weak that don't
need to be weak, such as strtol, but that's harmless).
Tested for x86 (testsuite, and that the disassembly of installed
shared libraries is unchanged by the patch). This fixes all 120
unXFAILed FAILs of the new linknamespace tests seen for x86 (in fact,
there are now seven XPASSes of those tests for x86
XPASS: conform/POSIX2008/fcntl.h/linknamespace
XPASS: conform/UNIX98/libgen.h/linknamespace
XPASS: conform/XOPEN2K/fcntl.h/linknamespace
XPASS: conform/XOPEN2K/libgen.h/linknamespace
XPASS: conform/XOPEN2K8/fcntl.h/linknamespace
XPASS: conform/XOPEN2K8/libgen.h/linknamespace
XPASS: conform/XPG4/libgen.h/linknamespace
so suggesting that the failures seen for those on x86_64 are in some
way architecture-specific or 64-bit-specific).
[BZ #17594]
* stdlib/strtol.c (SYM__): New macro.
(SYM__1): Likewise.
(__strtol): Likewise.
(strtol): Rename to __strtol and define as weak alias of
__strtol. Use libc_hidden_weak.
intl/localealias.c is brought in by ISO C functions, but uses
fgets_unlocked, which is not an ISO C function. This patch changes
this to use __fgets_unlocked.
Tested for x86_64 (testsuite, and that stripped installed shared
libraries are unchanged by the patch).
[BZ #17589]
* intl/localealias.c [_LIBC] (FGETS): Use __fgets_unlocked instead
of fgets_unlocked.
Locale code, brought in by ISO C functions, calls memmem, which is not
an ISO C function. This isn't an ISO C conformance bug, because all
mem* names are reserved, but glibc practice is not to rely on that
reservation (thus, memmem is only declared in string.h if __USE_GNU
even though ISO C would allow it to be declared unconditionally, for
example). This patch changes that code to use __memmem.
Note: there are uses of memmem elsewhere in glibc that I didn't
change, although it may turn out some of those also need to use
__memmem.
Tested for x86_64 (testsuite, and that disassembly of installed shared
libraries is unchanged by this patch).
[BZ #17585]
* string/memmem.c [!_LIBC] (__memmem): Define to memmem.
(memmem): Rename to __memmem and define as weak alias of
__memmem. Use libc_hidden_weak.
(__memmem): Use libc_hidden_def.
* include/string.h (__memmem): Declare. Use libc_hidden_proto.
* locale/findlocale.c (valid_locale_name): Use __memmem instead of
memmem.
__get_nprocs is called from malloc code, but calls fgets_unlocked,
which is not an ISO C or POSIX function. This patch fixes it to call
a new __fgets_unlocked name instead.
Note: there are various other uses of fgets_unlocked in glibc's
libraries, and I haven't yet investigated which others might also be
problematic (called directly or indirectly from standard functions)
and so need to change to use __fgets_unlocked.
Tested for x86_64 (testsuite, and that disassembly of installed shared
libraries is unchanged by the patch).
[BZ #17582]
* libio/iofgets.c [weak_alias && !_IO_MTSAFE_IO]
(__fgets_unlocked): Add alias of _IO_fgets. Use libc_hidden_def.
* libio/iofgets_u.c (fgets_unlocked): Rename to __fgets_unlocked
and define as weak alias of __fgets_unlocked. Use
libc_hidden_weak.
(__fgets_unlocked): Use libc_hidden_def.
* include/stdio.h (__fgets_unlocked): Declare. Use
libc_hidden_proto.
* sysdeps/unix/sysv/linux/getsysstats.c (phys_pages_info): Use
__fgets_unlocked instead of fgets_unlocked.
* sysdeps/unix/sysv/linux/alpha/getsysstats.c
(GET_NPROCS_CONF_PARSER): Likewise.
* sysdeps/unix/sysv/linux/sparc/getsysstats.c
(GET_NPROCS_CONF_PARSER): Likewise.
__printf_fp calls wmemset, but that is not an ISO C90 function. This
patch fixes it to call a new __wmemset name instead (with wmemset
being a weak alias).
Tested for x86_64 (testsuite, and that disassembly of installed shared
libraries is unchanged by the patch).
[BZ #17574]
* wcsmbs/wmemset.c (wmemset): Rename to __wmemset and define as
weak alias of __wmemset. Use libc_hidden_weak.
(__wmemset): Use libc_hidden_def.
* include/wchar.h (__wmemset): Declare. Use libc_hidden_proto.
* stdio-common/printf_fp.c (___printf_fp): Call __wmemset instead
of wmemset.
Various glibc functions call __stpcpy and __mempcpy for namespace
reasons instead of plain stpcpy and mempcpy. But __stpcpy and
__mempcpy are macros that call __builtin_stpcpy and __builtin_mempcpy,
and unless GCC optimizes the calls, they end up calling the C
functions stpcpy and mempcpy.
For calls from within shared libc, libc_hidden_builtin_proto ensures
that calls to those C functions are in turn mapped to call __GI_stpcpy
and __GI_mempcpy. However, for static libc, and for calls from shared
libraries other than libc, the ELF symbols stpcpy and mempcpy end up
getting called, breaking the ISO C namespace (in the case of stpcpy)
or glibc conventions about not relying on the "future library
directions" reservations (in the case of mempcpy).
This patch fixes this by adding declarations of these functions to
include/string.h, under an appropriate condition, with __asm__ used to
change the assembler name used for calls (the mempcpy case was
previously discussed, and the approach for the fix is as I suggested
in <https://sourceware.org/ml/libc-alpha/2013-02/msg00063.html>).
Tested for x86_64 with the testsuite; also checked that dcigettext.o
(an example previously noted of undesired calls to stpcpy and mempcpy)
now calls __stpcpy and __mempcpy instead, as do non-libc shared
libraries (__stpcpy and __mempcpy were already exported from shared
libc). Disassembly of installed shared libraries isn't easy to
compare because of reordered PLT entries resulting from the change in
functions called (libnsl, libnss_compat, libnss_dns, libnss_files,
libnss_hesiod, libnss_nis, libnss_nisplus, libpthread, librt all have
such changes).
[BZ #17573]
* include/string.h [NOT_IN_libc || !SHARED] (mempcpy): Declare
with asm name __mempcpy.
[NOT_IN_libc || !SHARED] (stpcpy): Declare with asm name __stpcpy.
rawmemchr is not an ISO C function, but __rawmemchr is called from ISO
C functions, so rawmemchr should be a weak alias. On most
architecture it is, but x86_64 defines the function as rawmemchr with
__rawmemchr as a strong alias. This patch makes x86_64 follow the
same arrangements as other architectures.
Tested for x86_64 (testsuite, and that disassembly of installed shared
libraries is unchanged by the patch).
[BZ #17572]
* sysdeps/x86_64/rawmemchr.S (rawmemchr): Rename to __rawmemchr
and define as weak alias of __rawmemchr.
(__rawmemchr): Do not define as strong alias of rawmemchr.
qsort_r is defined in the same file as qsort, but is not an ISO C
function, so should be a weak alias for __qsort_r. The uses in
getaddrinfo should also call __qsort_r, since getaddrinfo is a POSIX
function and qsort_r isn't. This patch implements this. Because nscd
uses the getaddrinfo sources outside libc, as do the tst-rfc3484
tests, a #define of __qsort_r to qsort_r is added there alongside the
similar defines for other libc-internal symbols used in getaddrinfo.
Tested for x86_64 (testsuite, and that disassembly of installed shared
libraries is unchanged by the patch).
[BZ #17571]
* stdlib/msort.c (qsort_r): Rename to __qsort_r and define as weak
alias of __qsort_r.
(qsort): Call __qsort_r instead of qsort_r.
* include/stdlib.h (qsort_r): Do not call libc_hidden_proto.
(__qsort_r): Declare. Call libc_hidden_proto.
* sysdeps/posix/getaddrinfo.c (getaddrinfo): Call __qsort_r
instead of qsort_r.
* nscd/gai.c (__qsort_r): Define to qsort_r.
* posix/tst-rfc3484.c (__qsort_r): Likewise.
* posix/tst-rfc3484-2.c (__qsort_r): Likewise.
* posix/tst-rfc3484-3.c (__qsort_r): Likewise.
malloc_info is defined in the same file as malloc and free, but is not
an ISO C function, so should be a weak symbol. This patch makes it
so.
Tested for x86_64 (testsuite, and that disassembly of installed shared
libraries is unchanged by the patch).
[BZ #17570]
* malloc/malloc.c (malloc_info): Rename to __malloc_info and
define as weak alias of __malloc_info.
__getcwd is called from dcigettext.o (brought in by various ISO C
functionality), but calls rewinddir, which is not an ISO C function.
This patch makes __getcwd call __rewinddir instead and makes rewinddir
a weak alias for __rewinddir.
Since getcwd.c is shared with gnulib (albeit not merged in either
direction for a long time, and omitted from gnulib's
config/srclist.txt list of shared files) I put in a #ifndef _LIBC
define of __rewinddir to rewinddir, although a future merged version
of getcwd could end up looking significantly different.
Tested for x86_64 (testsuite, and that disassembly of installed shared
libraries is unchanged by this patch).
[BZ #17584]
* dirent/rewinddir.c (rewinddir): Rename to __rewinddir and define
as weak alias of __rewinddir. Don't use libc_hidden_def.
(__rewinddir): Use libc_hidden_def.
* sysdeps/mach/hurd/rewinddir.c: Rename to __rewinddir and define
as weak alias of __rewinddir. Don't use libc_hidden_def.
(__rewinddir): Use libc_hidden_def.
* sysdeps/posix/rewinddir.c: Rename to __rewinddir and define as
weak alias of __rewinddir. Don't use libc_hidden_def.
(__rewinddir): Use libc_hidden_def.
* include/dirent.h (rewinddir): Don't use libc_hidden_proto.
(__rewinddir): Use libc_hidden_proto.
* sysdeps/posix/getcwd.c [!_LIBC] (__rewinddir): Define to
rewinddir.
(__getcwd): Use __rewinddir instead of rewinddir.
tzfile.c is brought in by various ISO C functions, but calls fileno,
fread_unlocked and ftello, which are not ISO C functions. This patch
adds names __fileno, __fread_unlocked and __ftello for those
functions, making tzfile.c use those new names.
Note: there are various uses of fileno elsewhere in glibc that I
didn't change, although it may turn out that some of those also need
to use __fileno.
Tested for x86_64 with the glibc testsuite. Changed line numbers in
tzfile.c cause changes in assertions, and for some reason this ends up
with different instruction choice and register allocation, affecting
the size of __tzfile_read and so making comparison of disassembly for
libc.so problematic.
[BZ #17583]
* libio/fileno.c (fileno): Rename to __fileno and define as weak
alias of __fileno. Use libc_hidden_weak.
(__fileno): Use libc_hidden_def.
[weak_alias] (fileno_unlocked): Define as weak alias of __fileno.
* libio/ftello.c (ftello): Rename to __ftello and define as weak
alias of __ftello.
[__OFF_T_MATCHES_OFF64_T] (ftello64): Define as weak alias of
__ftello.
* libio/iofread.c [weak_alias && !_IO_MTSAFE_IO]
(__fread_unlocked): Define as strong alias of _IO_fread. Use
libc_hidden_def.
(fread_unlocked): Don't use libc_hidden_ver.
* libio/iofread_u.c (fread_unlocked): Rename to __fread_unlocked
and define as weak alias of __fread_unlocked. Don't use
libc_hidden_def.
(__fread_unlocked): Use libc_hidden_def.
* include/stdio.h (__fileno): Declare. Use libc_hidden_proto.
(ftello): Don't use libc_hidden_proto.
(__ftello): Declare. Use libc_hidden_proto.
(fread_unlocked): Don't use libc_hidden_proto.
(__fread_unlocked): Declare. Use libc_hidden_proto.
* time/tzfile.c (__tzfile_read): Use __fileno, __fread_unlocked
and __ftello instead of fileno, fread_unlocked and ftello.
The s390 ABI requires the stack pointer to be aligned at 8-bytes.
When a program is invoked as an argument to the dynamic linker,
_dl_start_user adjusts the stack to remove the dynamic linker
arguments so that the program sees only its name and arguments. This
may result in the stack being misaligned since each argument shift is
only a word and not a double-word.
This is now fixed shifting argv and envp down instead of shifting argc
up and reclaiming the stack. This requires _dl_argv to be adjusted
and hence, is no longer relro.
Modifies the test examination in test-skeleton.c so that a test can be
successful if it is interrupted or it returns uninterrupted with the
expected status. For this both EXPECTED_SIGNAL and EXPECTED_STATUS
have to be set, as is done in tst-strcoll-overflow.c.
Continuing the removal of unused __libc_* function names, this patch
removes the __libc_waitpid name.
Tested for x86_64 (testsuite, and that disassembly of installed shared
libraries is unchanged by the patch; __waitpid, which is exported from
shared libc, changes from weak to strong on some configurations, which
is of no significance).
* include/sys/wait.h (__libc_waitpid): Remove declaration.
* posix/waitpid.c (__libc_waitpid): Rename to __waitpid.
(__waitpid): Don't define as alias. Use libc_hidden_def not
libc_hidden_weak.
(waitpid): Define as alias of __waitpid.
* sysdeps/unix/bsd/waitpid.c (__libc_waitpid): Rename to
__waitpid.
(__waitpid): Don't define as alias. Use libc_hidden_def not
libc_hidden_weak.
(waitpid): Define as alias of __waitpid.
* sysdeps/unix/sysv/linux/i386/syscalls.list (waitpid): Remove
__libc_waitpid alias.
* sysdeps/unix/sysv/linux/m68k/syscalls.list (waitpid): Likewise.
* sysdeps/unix/sysv/linux/powerpc/syscalls.list (waitpid):
Likewise.
* sysdeps/unix/sysv/linux/sh/syscalls.list (waitpid): Likewise.
* sysdeps/unix/sysv/linux/sparc/syscalls.list (waitpid): Likewise.
* sysdeps/unix/sysv/linux/tile/waitpid.S (__libc_waitpid): Remove
alias.
* sysdeps/unix/sysv/linux/waitpid.c (__libc_waitpid): Rename to
__waitpid.
(__waitpid): Don't define as alias. Use libc_hidden_def not
libc_hidden_weak.
(waitpid): Define as alias of __waitpid.
We add Linux-realted comments about the atomicity of
write with respect to file offsets. As of Linux 3.14
the file offset update is atomic. That means that
multiple threads calling the write syscall can not possibly
get the same file offset. Therefore the writes should
not overlap and data should not be lost as is required
by POSIX.
For maximum paranoia we run ld.so through the normal set
of tests for all of the shared libraries. This includes
running ld.so through check-localplt, check-textrel, and
check-execstack. While none of these should trigger any
failures given the way ld.so is built, it might possibly
fail if a developer does something wrong. This paranoia
was triggered by a discussion over the use of __strcpy
vs. strcpy [1] and if the symbol could leak and use the
libc.so version.
The check-localplt test fails right away because localplt.data
needs updating for all arches. By default we add 6 new symbols:
__tls_get_addr, __libc_memalign, malloc, calloc, realloc and
free. Other machines like i386, power, and s390 require some
different symbol sets e.g. ___tls_get_addr vs. __tls_get_addr
for i386.
Verified for i386
Verified for x86_64
Verified for ppc32
Verified for ppc64
Verified for ppc64le
Verified for arm
Verified for aarch64
Verified for s390
Verified for s390x
Guessed for alpha
Guessed for ia64
Guessed for m68k
Guessed for microblaze
Guessed for sparc32
Guessed for sparc64
Defaults for sh
Defaults for mips
Defaults for hppa
Defaults for tile
Machine manintainers notified to double check the data
used in localplt.data.
[1] https://sourceware.org/ml/libc-alpha/2014-10/msg00548.html
Completing the removal of the obsolete INTDEF / INTUSE mechanism, this
patch removes the final use - that for _dl_starting_up - replacing it
by rtld_hidden_def / rtld_hidden_proto. Having removed the last use,
the mechanism itself is also removed.
Tested for x86_64 that installed stripped shared libraries are
unchanged by the patch. (This is not much of a test since this
variable is only defined and used in the !HAVE_INLINED_SYSCALLS case.)
[BZ #14132]
* include/libc-symbols.h (INTUSE): Remove macro.
(INTDEF): Likewise.
(INTVARDEF): Likewise.
(_INTVARDEF): Likewise.
(INTDEF2): Likewise.
(INTVARDEF2): Likewise.
* elf/rtld.c [!HAVE_INLINED_SYSCALLS] (_dl_starting_up): Use
rtld_hidden_def instead of INTVARDEF.
* sysdeps/generic/ldsodefs.h [IS_IN_rtld]
(_dl_starting_up_internal): Remove declaration.
(_dl_starting_up): Use rtld_hidden_proto.
* elf/dl-init.c [!HAVE_INLINED_SYSCALLS] (_dl_starting_up): Remove
declaration.
[!HAVE_INLINED_SYSCALLS] (_dl_starting_up_internal): Likewise.
(_dl_init) [!HAVE_INLINED_SYSCALLS]: Don't use INTUSE with
_dl_starting_up.
* elf/dl-writev.h (_dl_writev): Likewise.
* sysdeps/powerpc/powerpc64/dl-machine.h [!HAVE_INLINED_SYSCALLS]
(DL_STARTING_UP_DEF): Use __GI__dl_starting_up instead of
_dl_starting_up_internal.
Add a microbenchmark for measuring malloc and free performance with
varying numbers of threads. The benchmark allocates and frees buffers
of random sizes in a random order and measures the overall execution
time and RSS. Variants of the benchmark are run with 1, 8, 16 and
32 threads.
The random block sizes used follow an inverse square distribution
which is intended to mimic the behaviour of real applications which
tend to allocate many more small blocks than large ones.
ChangeLog:
2014-11-05 Will Newton <will.newton@linaro.org>
* benchtests/Makefile: (bench-malloc): Add malloc thread
scalability benchmark.
* benchtests/bench-malloc-threads.c: New file.
Here is an optimized implementation of __strchrnul. The
simplification that we don't have to track precisely why the loop
terminates (match or end-of-string) means we have to do less work in
both setup and the core inner loop. That means this should never be
slower than strchr.
As with strchr, the use of LD1 means we do not need different versions
for big-/little-endian.
Continuing the removal of the obsolete INTDEF / INTUSE mechanism, this
patch replaces its use for _dl_mcount with use of rtld_hidden_def /
rtld_hidden_proto.
Tested for x86_64 that installed stripped shared libraries are
unchanged by the patch.
[BZ #14132]
* elf/dl-profile.c (_dl_mcount): Use rtld_hidden_def instead of
INTDEF.
* sysdeps/generic/ldsodefs.h (_dl_mcount_internal): Remove
declaration.
(_dl_mcount): Use rtld_hidden_proto.
* elf/dl-runtime.c (_dl_profile_fixup): Don't use INTUSE with
_dl_mcount.
* elf/rtld.c (_rtld_global_ro): Likewise.
Continuing the removal of the obsolete INTDEF / INTUSE mechanism, this
patch eliminates its use for _dl_init. Since _dl_init was already
declared with hidden visibility, creating a second hidden alias for it
was completely pointless, so this patch replaces all uses of
_dl_init_internal with plain _dl_init instead of using hidden_proto /
hidden_def (which are only needed when you want a hidden alias for a
non-hidden symbol; it's quite possible there are cases where they are
used but don't need to be because the symbol in question is not part
of the public ABI and is only used within a single library, so using
attributes_hidden instead would suffice).
Tested for x86_64 that installed stripped shared libraries are
unchanged by the patch.
[BZ #14132]
* elf/dl-init.c (_dl_init): Don't use INTDEF.
* sysdeps/aarch64/dl-machine.h (RTLD_START): Use _dl_init instead
of _dl_init_internal.
* sysdeps/alpha/dl-machine.h (RTLD_START): Likewise.
* sysdeps/arm/dl-machine.h (RTLD_START): Likewise.
* sysdeps/hppa/dl-machine.h (RTLD_START): Likewise.
* sysdeps/i386/dl-machine.h (RTLD_START): Likewise.
* sysdeps/ia64/dl-machine.h (RTLD_START): Likewise.
* sysdeps/m68k/dl-machine.h (RTLD_START): Likewise.
* sysdeps/microblaze/dl-machine.h (RTLD_START): Likewise.
* sysdeps/mips/dl-machine.h (RTLD_START): Likewise.
* sysdeps/powerpc/powerpc32/dl-start.S (_start): Likewise.
* sysdeps/s390/s390-32/dl-machine.h (RTLD_START): Likewise.
* sysdeps/s390/s390-64/dl-machine.h (RTLD_START): Likewise.
* sysdeps/sh/dl-machine.h (RTLD_START): Likewise.
* sysdeps/sparc/sparc32/dl-machine.h (RTLD_START): Likewise.
* sysdeps/sparc/sparc64/dl-machine.h (RTLD_START): Likewise.
* sysdeps/tile/dl-start.S (_start): Likewise.
* sysdeps/x86_64/dl-machine.h (RTLD_START): Likewise.
* sysdeps/x86_64/x32/dl-machine.h (RTLD_START): Likewise.
Continuing the removal of the obsolete INTDEF / INTUSE mechanism, this
patch replaces its use for _dl_argv with rtld_hidden_data_def and
rtld_hidden_proto. Some places in .S files that previously used
_dl_argv_internal or INTUSE(_dl_argv) now use __GI__dl_argv directly
(there are plenty of existing examples of such direct use of __GI_*).
A single place in rtld.c previously used _dl_argv without INTUSE,
apparently accidentally, while the rtld_hidden_proto mechanism avoids
such accidential omissions. As a consequence, this patch *does*
change the contents of stripped ld.so. However, the installed
stripped shared libraries are identical to those you get if instead of
this patch you change that single _dl_argv use to use INTUSE, without
any other changes.
Tested for x86_64 (testsuite as well as comparison of installed
stripped shared libraries as described above).
[BZ #14132]
* sysdeps/generic/ldsodefs.h (_dl_argv): Use rtld_hidden_proto.
[IS_IN_rtld] (_dl_argv_internal): Do not declare.
(rtld_progname): Make macro definition unconditional.
* elf/rtld.c (_dl_argv): Use rtld_hidden_data_def instead of
INTDEF.
(dlmopen_doit): Do not use INTUSE with _dl_argv.
(dl_main): Likewise.
* elf/dl-sysdep.c (_dl_sysdep_start): Likewise.
* sysdeps/alpha/dl-machine.h (RTLD_START): Use __GI__dl_argv
instead of _dl_argv_internal.
* sysdeps/powerpc/powerpc32/dl-start.S (_dl_start_user): Use
__GI__dl_argv instead of INTUSE(_dl_argv).
* sysdeps/powerpc/powerpc64/dl-machine.h (RTLD_START): Use
__GI__dl_argv instead of _dl_argv_internal.
Continuing the series of patches adding soft-fp features from the
kernel version of soft-fp to glibc so that glibc's version is able to
replace the old fork of soft-fp in the kernel, this patch adds the
last major such feature: _FP_TO_INT_ROUND, converting a floating-point
number to an integer with rounding according to the current rounding
direction (as opposed to truncating towards zero, which _FP_TO_INT
does).
The general structure of the implementation follows that of
_FP_TO_INT, but of course is more complicated. As with glibc's
_FP_TO_INT it works with raw input (the kernel versions of these
macros predate the conversion of _FP_TO_INT and many other macros to
raw or semi-raw input). I have not tried to work out what bugs there
might be in the kernel version that this might fix; it's a
from-scratch implementation based on _FP_TO_INT.
Tested for powerpc (soft-float) that there is no change to the
installed shared libraries; also tested with the libm tests with lrint
/ lrintf / llrint / llrintf made to use _FP_TO_INT_ROUND, to provide
some test of the functionality. As we don't have benchmarks for those
functions, I haven't actually included the soft-fp versions of them,
although I expect them to be faster than the existing code (given that
the existing code involves adding and subtracting numbers such as
0x1p52 to achieve the desired rounding, which is not particularly
efficient when the underlying floating point is software floating
point).
2014-11-04 Joseph Myers <joseph@codesourcery.com>
* soft-fp/op-common.h (_FP_TO_INT_ROUND): New macro.
* soft-fp/double.h [_FP_W_TYPE_SIZE < 64] (FP_TO_INT_ROUND_D): New
macro.
[_FP_W_TYPE_SIZE >= 64] (FP_TO_INT_ROUND_D): Likewise.
* soft-fp/extended.h [_FP_W_TYPE_SIZE < 64] (FP_TO_INT_ROUND_E):
New macro.
[_FP_W_TYPE_SIZE >= 64] (FP_TO_INT_ROUND_E): Likewise.
* soft-fp/quad.h [_FP_W_TYPE_SIZE < 64] (FP_TO_INT_ROUND_Q): New
macro.
[_FP_W_TYPE_SIZE >= 64] (FP_TO_INT_ROUND_Q): Likewise.
* soft-fp/single.h (FP_TO_INT_ROUND_S): New macro.
Continuing the removal of unused __libc_* function names, this patch
removes the __libc_nanosleep name.
Tested for x86_64 (testsuite, and that the disassembly of installed
shared libraries is unchanged by the patch; __nanosleep changes from
weak to strong, which is of no significance).
* posix/nanosleep.c (__libc_nanosleep): Rename to __nanosleep.
(__nanosleep): Do not define as alias.
(nanosleep): Define as alias of __nanosleep.
* sysdeps/unix/sysv/linux/syscalls.list (nanosleep): Remove
__libc_nanosleep name.
This hook can be used to perform additional compatibility checks
between shared libraries by inspecting custom program header
information.
* elf/dl-machine-reject-phdr.h: New file.
* elf/dl-load.c: #include that.
(open_verify): Call elf_machine_reject_phdr_p and ignore the file
if that returned true.
I noticed that install.texi was out of date with regard to the actual
autoconf version requirement for regenerating configure scripts. This
patch updates the documentation.
* manual/install.texi (Tools for Compilation): Update autoconf
version requirements.
* INSTALL: Regenerated.
Continuing the removal of unused __libc_* function names, this patch
removes the __libc_pselect alias.
Tested for x86_64 that installed stripped shared libraries are
unchanged by this patch.
* misc/pselect.c [!__pselect] (__libc_pselect): Remove alias.
* sysdeps/unix/sysv/linux/pselect.c [__NR_pselect6]
(__libc_pselect): Likewise.
Concluding the move of syscall definitions to syscalls.list, where the
removal of support for old kernel versions has made this possible,
this patch removes C definitions of pread, pread64, pwrite and
pwrite64 for powerpc64. As far as I can tell, the existing
syscalls.list definitions in
sysdeps/unix/sysv/linux/wordsize-64/syscalls.list should suffice to
produce results equivalent to what these C files do.
[BZ #14138]
* sysdeps/unix/sysv/linux/powerpc/powerpc64/pread.c: Remove file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/pread64.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/pwrite.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/pwrite64.c: Likewise.
Continuing the removal of __libc_* function names that are no longer
used anywhere, this patch removes the __libc_readv and __libc_writev
names.
Tested for x86_64 that stripped installed shared libraries are
unchanged by the patch.
* include/sys/uio.h (__libc_readv): Remove declaration.
(__libc_writev): Likewise.
* misc/readv.c (__libc_readv): Rename to __readv.
(__readv): Do not define as alias.
(readv): Define as alias of __readv.
* misc/writev.c (__libc_writev): Rename to __writev.
(__writev): Do not define as alias.
(writev): Define as alias of __writev.
* sysdeps/posix/readv.c (__libc_readv): Rename to __readv.
(__readv): Do not define as alias.
(readv): Define unconditionally as alias of __readv.
* sysdeps/posix/writev.c (__libc_writev): Rename to __writev.
(__writev): Do not define as alias.
(writev): Define unconditionally as alias of __writev.
* sysdeps/unix/syscalls.list (readv): Do not define __libc_readv
name.
(writev): Do not define __libc_writev name.
glibc has lots of __libc_* function names that no longer serve any
purpose (are not used for any calls or exported at a public symbol
version). This patch removes __libc_creat. It has the effect of
creat becoming a strong symbol instead of a weak symbol in various
cases, but that's fine; in shared libraries it doesn't matter at all,
while for static linking the only other symbol sometimes defined in
the same object is creat64, and whenever creat64 is a reserved name so
is creat.
Other such cases of unnecessary __libc_* symbols are expected to be
dealt with in separate patches over time.
Tested for x86_64 (testsuite, and that the disassembly of installed
shared libraries is unchanged by the patch).
* include/fcntl.h (__libc_creat): Remove declaration.
* io/creat.c (__libc_creat): Rename to creat.
(creat): Do not define as alias.
* sysdeps/unix/sysv/linux/alpha/creat.c (creat64): Define as alias
of creat instead of __libc_creat.
* sysdeps/unix/sysv/linux/generic/creat.c (__libc_creat): Rename
to creat.
(creat): Do not define as alias.
[__WORDSIZE == 64] (creat64): Define as alias of creat instead of
__libc_creat.
* sysdeps/unix/sysv/linux/syscalls.list (creat): Do not define
__libc_creat name.
* sysdeps/unix/sysv/linux/wordsize-64/syscalls.list (creat):
Likewise.
Add Linux-specific comments about the atomicity of write() and
the POSIX requirements.
2014-10-29 Carlos O'Donell <carlos@redhat.com>
* manual/llio.texi: Add comments discussing why write() may be
considered MT-unsafe on Linux.
During a refactoring pass several repeated blocks of code in dl-load.c
were turned into a call to a local function named local_strdup. There
is no need for local_strdup, and the routines should instead call
__strdup. This change does just that. We call the internal symbol
__strdup because calling strdup is unsafe. The user might be
using a standard that doesn't include strdup and may have defined this
symbol in their application. During a static link we might reference
the user defined symbol and crash if it doesn't implement a standards
conforming strdup. The resulting code is simpler to understand, and
makes it easier to debug.
No regressions on x86_64.
2014-10-28 Carlos O'Donell <carlos@redhat.com>
* dl-load.c (local_strdup): Remove.
(expand_dynamic_string_token): Use __strdup.
(decompose_rpath): Likewise.
(_dl_map_object): Likewise.
Continuing the removal of the obsolete INTDEF / INTUSE mechanism, this
patch replaces its use in unwind-dw2-fde.c with hidden_def and
hidden_proto.
Tested for x86. This patch does result in code generation differences
(for some reason GCC decides to partition __register_frame_info_bases
after the patch).
[BZ #14132]
* sysdeps/generic/unwind-dw2-fde.c
(__register_frame_info_bases_internal): Do not declare.
(__register_frame_info_table_bases_internal): Likewise.
(__deregister_frame_info_bases_internal): Likewise.
(__register_frame_info_bases): Declare and use hidden_proto before
definition. Use hidden_def instead of INTDEF.
(__register_frame_info_table_bases): Likewise.
(__deregister_frame_info_bases): Likewise.
(__register_frame_info): Do not use INTUSE.
(__register_frame): Likewise.
(__register_frame_info_table): Likewise.
(__register_frame_table): Likewise.
(__deregister_frame_info): Likewise.
(__deregister_frame): Likewise.
ARM linux kernels before 3.14.3 may or may not support
futex_atomic_cmpxchg_inatomic depending on the kernel configuration (e.g.
CONFIG_CPU_USE_DOMAINS && CONFIG_SMP configuration was not supported)
Starting with 3.14.3 the linux kernel unconditionally enables support for
ARM, and this re-enables the relevant __ASSUME_* macros.
Tested on ARM both with kernels >= 3.14.3 and older kernels.
* sysdeps/unix/sysv/linux/arm/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x030E03] (__ASSUME_FUTEX_LOCK_PI): Do
not undefine.
[__LINUX_KERNEL_VERSION >= 0x030E03] (__ASSUME_REQUEUE_PI):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x030E03] (__ASSUME_SET_ROBUST_LIST):
Likewise.
this
will improve performance even on targets which don't have an optimized strlen. It is about twice
as
fast as the original strncat in bench-strncat.
implementation, so this improves performance even on targets which don't have an optimized
strlen and strcpy - it is 25% faster in bench-strcat. On targets which don't provide an
optimized strcat but which do have an optimized strlen and strcpy, performance gain is > 2x.
Continuing the move of syscall definitions to syscalls.list, where the
removal of support for old kernel versions has made this possible,
this patch moves various definitions of chown, lchown and fchown.
In most cases the need for special syscalls.list entries (rather than
existing generic ones) is because these architectures use chown32,
lchown32 and fchown32 as syscall names. Some architectures also have
symbol versioning compatibility for older versions of chown having
been equivalent to lchown.
The aliases specified for s390-32 had the effect of exporting
__chown@@GLIBC_2.1 (but not __chown@GLIBC_2.0) despite it not being
listed in Versions files. (I'm not sure why versioned_symbol but not
compat_symbol were effective like that to create such __chown exports
in the absence of Versions entries.) The natural way to preserve that
versioned export of __chown seems to be to add it in a Versions file,
so I did so. (Maybe actually it should be a compat symbol,
__chown@GLIBC_2.1, unless there's a good reason for that export, but
this patch doesn't change anything there.)
Tested for x86.
[BZ #14138]
* sysdeps/unix/sysv/linux/i386/chown.c: Remove file.
* sysdeps/unix/sysv/linux/i386/fchown.c: Likewise.
* sysdeps/unix/sysv/linux/i386/lchown.c: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/chown.c: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/fchown.c: Remove file.
* sysdeps/unix/sysv/linux/s390/s390-32/lchown.c: Likewise.
* sysdeps/unix/sysv/linux/sh/chown.c: Likewise.
* sysdeps/unix/sysv/linux/sh/fchown.c: Likewise.
* sysdeps/unix/sysv/linux/sh/lchown.c: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/chown.c: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/fchown.c: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/lchown.c: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/Versions (GLIBC_2.1): Add
__chown.
* sysdeps/unix/sysv/linux/i386/syscalls.list (chown): Add syscall.
(lchown): Likewise.
(fchown): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/syscalls.list (chown):
Likewise.
(lchown): Likewise.
(fchown): Likewise.
* sysdeps/unix/sysv/linux/sh/syscalls.list (chown): Likewise.
(lchown): Likewise.
(fchown): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/syscalls.list (chown):
Likewise.
(lchown): Likewise.
(fchown): Likewise.
In the Linux kernel version 3.17 the signal numbers were rearranged in
order to make hppa like every other arch. Previously we started
__SIGRTMIN at 37, and that meant several pieces of important software,
including systemd, would fail to build. To support systemd we removed
SIGEMT and SIGLOST, and rearranged the others according to expected
values. This is technically an ABI incompatible change, but because
zero applications use SIGSTKFLT, SIGXCPU, SIGXFSZ and SIGSYS nothing
broke. Nothing uses SIGEMT and SIGLOST, and they were present for
HPUX compatibility which is no longer supported. Thus because nothing
breaks we don't do any compatibility work here.
Upstream kernel commit is 1f25df2eff5b25f52c139d3ff31bc883eee9a0ab.
Signed-off-by: Carlos O'Donell <carlos@systemhalted.org>
Signed-off-by: Helge Deller <deller@gmx.de>
2014-10-23 Carlos O'Donell <carlos@systemhalted.org>
Helge Deller <deller@gmx.de>
[BZ #17508]
* sysdeps/unix/sysv/linux/hppa/bits/signum.h: Remove SIGEMT.
Define SIGSTKFLT as 7. Define SIGSYS as 31. Define SIGXCPU as 12.
Remove SIGLOST. Define SIGXFSZ as 30. Define __SIGRTMIN as 32.
Continuing the removal of the obsolete INTDEF / INTUSE mechanism, this
patch removes the use of INTUSE to rename symbols in
sysdeps/powerpc/powerpc32/libgcc-compat.S. As the names in question
are purely internal to this particular object and not used anywhere
else, it doesn't matter at all whether __*_v_glibc20 or __*_internal
is used, so this patch just removes the macros in question.
Tested for powerpc32 that stripped installed shared libraries are
unchanged by this patch.
[BZ #14132]
* sysdeps/powerpc/powerpc32/libgcc-compat.S (__ashldi3_v_glibc20):
Remove macro definition.
(__ashrdi3_v_glibc20): Likewise.
(__lshrdi3_v_glibc20): Likewise.
(__cmpdi2_v_glibc20): Likewise.
(__ucmpdi2_v_glibc20): Likewise.
[!_SOFT_FLOAT && !__NO_FPRS__] (__fixdfdi_v_glibc20): Likewise.
[!_SOFT_FLOAT && !__NO_FPRS__] (__fixsfdi_v_glibc20): Likewise.
[!_SOFT_FLOAT && !__NO_FPRS__] (__fixunsdfdi_v_glibc20): Likewise.
[!_SOFT_FLOAT && !__NO_FPRS__] (__fixunssfdi_v_glibc20): Likewise.
[!_SOFT_FLOAT && !__NO_FPRS__] (__floatdidf_v_glibc20): Likewise.
[!_SOFT_FLOAT && !__NO_FPRS__] (__floatdisf_v_glibc20): Likewise.
