Add a FAIL test failure helper analogous to FAIL_RET, that does not
cause the current function to return, providing a standardized way to
report a test failure with a message supplied while permitting the
caller to continue executing, for further reporting, cleaning up, etc.
Update existing test cases that provide a conflicting definition of FAIL
by removing the local FAIL definition and then as follows:
- tst-fortify-syslog: provide a meaningful message in addition to the
file name already added by <support/check.h>; 'support_record_failure'
is already called by 'support_print_failure_impl' invoked by the new
FAIL test failure helper.
- tst-ctype: no update to FAIL calls required, with the name of the file
and the line number within of the failure site additionally included
by the new FAIL test failure helper, and error counting plus count
reporting upon test program termination also already provided by
'support_record_failure' and 'support_report_failure' respectively,
called by 'support_print_failure_impl' and 'adjust_exit_status' also
respectively. However in a number of places 'printf' is called and
the error count adjusted by hand, so update these places to make use
of FAIL instead. And last but not least adjust the final summary just
to report completion, with any error count following as reported by
the test driver.
- test-tgmath2: no update to FAIL calls required, with the name of the
file of the failure site additionally included by the new FAIL test
failure helper. Also there is no need to track the return status by
hand as any call to FAIL will eventually cause the test case to return
an unsuccesful exit status regardless of the return status from the
test function, via a call to 'adjust_exit_status' made by the test
driver.
Reviewed-by: DJ Delorie <dj@redhat.com>
The error message in xgetsockname was incorrectly referring to a
different function. This commit fixes that.
Suggested-by: Arjun Shankar <arjun@redhat.com>
Signed-off-by: Avinal Kumar <avinal.xlvii@gmail.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was raised on libc-help [1] that some Linux kernel interfaces expect
the libc to define __USE_TIME_BITS64 to indicate the time_t size for the
kABI. Different than defined by the initial y2038 design document [2],
the __USE_TIME_BITS64 is only defined for ABIs that support more than
one time_t size (by defining the _TIME_BITS for each module).
The 64 bit time_t redirects are now enabled using a different internal
define (__USE_TIME64_REDIRECTS). There is no expected change in semantic
or code generation.
Checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu, and
arm-linux-gnueabi
[1] https://sourceware.org/pipermail/libc-help/2024-January/006557.html
[2] https://sourceware.org/glibc/wiki/Y2038ProofnessDesign
Reviewed-by: DJ Delorie <dj@redhat.com>
For container tests, gdb needs to set the sysroot to the corresponding
testroot.root directory. The assumption was that PIDs < 3 means that
we are running within a container.
Starting with commit 2fe64148a8
"Allow for unpriviledged nested containers", the default is to use
the PID namespace of the parent. Thus support_test_main.c does not
recognize our container anymore.
This patch now assumes that we are running inside a container if
test-container.c has set PID_OUTSIDE_CONTAINER and always uses this
PID independent of having a new PID namespace or not.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
If the binary to run is 'env', test-containers skips it and adds
any required environment variable on the process envs variables.
This simplifies the required code to spawn new process (no need
to build an env-like program).
However, this is an issue for recursive_remove if there is any
LD_PRELOAD, since test-container will not prepend the loader command
along with required paths. If the required preloaded library can
not be loaded by the system glibc, the 'post-clean rsync' will
eventually fail.
One example is if system glibc does not support DT_RELR and the
built glibc does, the nss/tst-nss-gai-hv2-canonname test fails
with:
../scripts/evaluate-test.sh nss/tst-nss-gai-hv2-canonname $? false false
86_64-linux-gnu/nss/tst-nss-gai-hv2-canonname.test-result
rm: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_ABI_DT_RELR' not
found (required by x86_64-linux-gnu/malloc/libc_malloc_debug.so)
Instead trying to figure out the required loader arguments on how
to spawn the 'rm -rf', replace the command with a nftw call.
Checked on x86_64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Stefan Liebler <stli@linux.ibm.com>
Changing tst-cleanup4.c to use xread instead of read caused
the nptl/tst-cleanupx4 test to fail. The routines in libsupport.a
need to be built with exception handling and asynchronous unwind
table support.
v2: Use "CFLAGS-.oS" instead of "override CFLAGS".
With fortification enabled, system calls return result needs to be checked,
has it gets the __wur macro enabled.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
With fortification enabled, read calls return result needs to be checked,
has it gets the __wur macro enabled.
Note on read call removal from sysdeps/pthread/tst-cancel20.c and
sysdeps/pthread/tst-cancel21.c:
It is assumed that this second read call was there to overcome the race
condition between pipe closure and thread cancellation that could happen
in the original code. Since this race condition got fixed by
d0e3ffb7a5 the second call seems
superfluous. Hence, instead of checking for the return value of read, it
looks reasonable to simply remove it.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
With fortification enabled, fgets calls return result needs to be checked,
has it gets the __wur macro enabled.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
With fortification enabled, fread calls return result needs to be checked,
has it gets the __wur macro enabled.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
With fortification enabled, few function calls return result need to be
checked, has they get the __wur macro enabled.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
In some cases (e.g. when podman creates user containers), the only other
group assigned to the executing user is nobody and fchown fails with it
because the group is not mapped. Do not fail the test in this case,
instead exit as unsupported.
Reported-by: Frédéric Bérat <fberat@redhat.com>
Tested-by: Frédéric Bérat <fberat@redhat.com>
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Add list end markers.
Sort text using scripts/sort-makefile-lines.py.
No code generation changes observed in non-test binary artifacts.
No regressions on x86_64 and i686.
Prevent sh from interpreting a user string as shell options if it
starts with '-' or '+'. Since the version of /bin/sh used for testing
system() is different from the full-fledged system /bin/sh add support
to it for handling "--" after "-c". Add a testcase to ensure the
expected behavior.
Signed-off-by: Joe Simmons-Talbott <josimmon@redhat.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Fix bug that SIGCHLD is erroneously blocked forever in the following
scenario:
1. Thread A calls system but hasn't returned yet
2. Thread B calls another system but returns
SIGCHLD would be blocked forever in thread B after its system() returns,
even after the system() in thread A returns.
Although POSIX does not require, glibc system implementation aims to be
thread and cancellation safe. This bug was introduced in
5fb7fc9635 when we moved reverting signal
mask to happen when the last concurrently running system returns,
despite that signal mask is per thread. This commit reverts this logic
and adds a test.
Signed-off-by: Adam Yi <ayi@janestreet.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
C2x adds binary integer constants starting with 0b or 0B, and supports
those constants for the %i scanf format (in addition to the %b format,
which isn't yet implemented for scanf in glibc). Implement that scanf
support for glibc.
As with the strtol support, this is incompatible with previous C
standard versions, in that such an input string starting with 0b or 0B
was previously required to be parsed as 0 (with the rest of the input
potentially matching subsequent parts of the scanf format string).
Thus this patch adds 12 new __isoc23_* functions per long double
format (12, 24 or 36 depending on how many long double formats the
glibc configuration supports), with appropriate header redirection
support (generally very closely following that for the __isoc99_*
scanf functions - note that __GLIBC_USE (DEPRECATED_SCANF) takes
precedence over __GLIBC_USE (C2X_STRTOL), so the case of GNU
extensions to C89 continues to get old-style GNU %a and does not get
this new feature). The function names would remain as __isoc23_* even
if C2x ends up published in 2024 rather than 2023.
When scanf %b support is added, I think it will be appropriate for all
versions of scanf to follow C2x rules for inputs to the %b format
(given that there are no compatibility concerns for a new format).
Tested for x86_64 (full glibc testsuite). The first version was also
tested for powerpc (32-bit) and powerpc64le (stdio-common/ and wcsmbs/
tests), and with build-many-glibcs.py.
From the tests point of view, this is a necessary step for another
patch [1] and allows parsing macros such as "#define A | B". Without
it, a few tests [2] choke when the other patch [1] is applied:
/src/glibc/scripts/../elf/elf.h:4167: error: uninterpretable macro
token sequence: ( EF_ARC_MACH_MSK | EF_ARC_OSABI_MSK )
Traceback (most recent call last):
File "/src/glibc/elf/tst-glibcelf.py", line 23, in <module>
import glibcelf
File "/src/glibc/scripts/glibcelf.py", line 226, in <module>
_elf_h = _parse_elf_h()
^^^^^^^^^^^^^^
File "/src/glibc/scripts/glibcelf.py", line 223, in _parse_elf_h
raise IOError('parse error in elf.h')
OSError: parse error in elf.h
[1] ARC: update definitions in elf/elf.h
https://sourceware.org/pipermail/libc-alpha/2022-November/143503.html
[2]
tst-glibcelf, tst-relro-ldso, and tst-relro-libc
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Shahab Vahedi <shahab@synopsys.com>
Since Linux 4.9, the kernel provides
/proc/sys/user/max_{mnt,pid,user}_namespace as a limitation of number of
namespaces. Some distros (for example, Slint Linux 14.2.1) set them (or
only max_user_namespace) to zero as a "security policy" for disabling
namespaces.
The clone() call will set errno to ENOSPC under such a limitation. We
didn't check ENOSPC in the code so the test will FAIL, and report:
unable to unshare user/fs: No space left on device
This message is, unfortunately, very unhelpful. It leads people to
check the memory or disk space, instead of finding the real issue.
To improve the situation, we should check for ENOSPC and return
UNSUPPORTED as the test result. Also refactor check_for_unshare_hints()
to emit a proper message telling people how to make the test work, if
they really need to run the namespaced tests.
Reported-by: Philippe Delavalade <philippe.delavalade@orange.fr>
URL: https://lists.linuxfromscratch.org/sympa/arc/lfs-support/2022-06/msg00022.html
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Reviewed-by: DJ Delorie <dj@redhat.com>
It makes sense to include the owner name (LHS) and record type in the
output, so that they can be checked for correctness.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Comment out bits of code that are only used when we *have* pid
namespaces, to avoid "unused code" warnings.
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-Id: <xno817tnds.fsf@greed.delorie.com>
If the build itself is run in a container, we may not be able to
fully set up a nested container for test-container testing.
Notably is the mounting of /proc, since it's critical that it
be mounted from within the same PID namespace as its users, and
thus cannot be bind mounted from outside the container like other
mounts.
This patch defaults to using the parent's PID namespace instead of
creating a new one, as this is more likely to be allowed.
If the test needs an isolated PID namespace, it should add the "pidns"
command to its init script.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Use INT_STRLEN_BOUND to proper get the maximum pid_t size. Also
fix the wrong calculation (the 3 should multiply the sizeof (pid_t)).
Checked on x86_64-linux-gnu.
Check if the socket support 64-bit network packages timestamps
(SO_TIMESTAMP and SO_TIMESTAMPNS). This will be used on recvmsg
and recvmmsg tests to check if the timestamp should be generated.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Add new helpers support_create_and_chdir_toolong_temp_directory and
support_chdir_toolong_temp_directory to create and descend into
directory trees longer than PATH_MAX.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Some functions (e.g. stpcpy, pread64, etc.) had moved to POSIX in the
main headers as they got incorporated into the standard, but their
fortified variants remained under __USE_GNU. As a result, these
functions did not get fortified when _GNU_SOURCE was not defined.
Add test wrappers that check all functions tested in tst-chk0 at all
levels with _GNU_SOURCE undefined and then use the failures to (1)
exclude checks for _GNU_SOURCE functions in these tests and (2) Fix
feature macro guards in the fortified function headers so that they're
the same as the ones in the main headers.
This fixes BZ #28746.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Check if the socket support 64-bit network packages timestamps
(SO_TIMESTAMP and SO_TIMESTAMPNS). This will be used on recvmsg
and recvmmsg tests to check if the timestamp should be generated.
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
On Ice Lake and Tiger Lake laptops, some test programs timeout when there
are 3 "make check -j8" runs in parallel. Add --with-timeoutfactor=NUM to
specify an integer to scale the timeout of test programs, which can be
overriden by TIMEOUTFACTOR environment variable.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
This is the first of a 2-part patch set that fixes slow DSO sorting behavior in
the dynamic loader, as reported in BZ #17645. In order to facilitate such a
large modification to the dynamic loader, this first patch implements a testing
framework for validating shared object sorting behavior, to enable comparison
between old/new sorting algorithms, and any later enhancements.
This testing infrastructure consists of a Python script
scripts/dso-ordering-test.py' which takes in a description language, consisting
of strings that describe a set of link dependency relations between DSOs, and
generates testcase programs and Makefile fragments to automatically test the
described situation, for example:
a->b->c->d # four objects linked one after another
a->[bc]->d;b->c # a depends on b and c, which both depend on d,
# b depends on c (b,c linked to object a in fixed order)
a->b->c;{+a;%a;-a} # a, b, c serially dependent, main program uses
# dlopen/dlsym/dlclose on object a
a->b->c;{}!->[abc] # a, b, c serially dependent; multiple tests generated
# to test all permutations of a, b, c ordering linked
# to main program
(Above is just a short description of what the script can do, more
documentation is in the script comments.)
Two files containing several new tests, elf/dso-sort-tests-[12].def are added,
including test scenarios for BZ #15311 and Redhat issue #1162810 [1].
Due to the nature of dynamic loader tests, where the sorting behavior and test
output occurs before/after main(), generating testcases to use
support/test-driver.c does not suffice to control meaningful timeout for ld.so.
Therefore a new utility program 'support/test-run-command', based on
test-driver.c/support_test_main.c has been added. This does the same testcase
control, but for a program specified through a command-line rather than at the
source code level. This utility is used to run the dynamic loader testcases
generated by dso-ordering-test.py.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1162810
Signed-off-by: Chung-Lin Tang <cltang@codesourcery.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
GCC 4.9.0 added the alloc_align attribute to say that a function
argument specifies the alignment of the returned pointer. Clang supports
the attribute too. Using the attribute can allow a compiler to generate
better code if it knows the returned pointer has a minimum alignment.
See https://gcc.gnu.org/PR60092 for more details.
GCC implicitly knows the semantics of aligned_alloc and posix_memalign,
but not the obsolete memalign. As a result, GCC generates worse code
when memalign is used, compared to aligned_alloc. Clang knows about
aligned_alloc and memalign, but not posix_memalign.
This change adds a new __attribute_alloc_align__ macro to <sys/cdefs.h>
and then uses it on memalign (where it helps GCC) and aligned_alloc
(where GCC and Clang already know the semantics, but it doesn't hurt)
and xposix_memalign. It can't be used on posix_memalign because that
doesn't return a pointer (the allocated pointer is returned via a void**
parameter instead).
Unlike the alloc_size attribute, alloc_align only allows a single
argument. That means the new __attribute_alloc_align__ macro doesn't
really need to be used with double parentheses to protect a comma
between its arguments. For consistency with __attribute_alloc_size__
this patch defines it the same way, so that double parentheses are
required.
Signed-off-by: Jonathan Wakely <jwakely@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
