This patch defines ELF_MACHINE_NO_RELA on all architectures. Tested
only on x86_64 to verify that the sources before and after are
identical except for two instructions that pass the current line
number in dl-machine.h to assert_fail.
This patch fixes -Wundef warnings related to the _ABI* macros on MIPS.
GCC predefines only the _ABI* macro related to the ABI actually in
use, meaning that a conditional such as "#if _MIPS_SIM == _ABI64" is
true only for the ABI in question (all the macros are nonzero), but
produces a -Wundef warning for the other ABIs. The normal approach to
using these macros is to include <sgidefs.h>, which ensures that all
three _ABI* macros are defined rather than just one; this patch does
so in the places that caused warnings (the bulk of the warnings
arising from <bits/wordsize.h>). Tested that the warnings are fixed.
* sysdeps/mips/bits/wordsize.h: Include <sgidefs.h>.
* sysdeps/unix/sysv/linux/mips/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/mips/setrlimit64.c: Likewise.
Testing on mips64 showed missing underflow exceptions (from exp, for
example) in non-default rounding modes, caused by
libc_feresetround*_ctx wrongly restoring a saved environment without
preserving exceptions, when that's only valid for the _noex variants.
(I don't know why Steve didn't see this in his testing.) This patch
fixes this by using libc_feupdateenv_mips_ctx for the relevant macros
and removing the problem definitions.
The problem definitions aren't suitable for the _noex macros either
because they only discard exceptions in non-default rounding modes,
and while for some uses of *_noex/*_NOEX it doesn't matter whether
exceptions are discarded, dbl-64/e_remainder.c requires
SET_RESTORE_ROUND_NOEX to cause exceptions to be discarded. I think
the accumulated set of macros / functions for optimized exception /
rounding mode handling could do with a careful review by now, and
possible refactoring, and at least one new feature (extracting the
saved rounding mode from an environment / context variable - see
dbl-64/e_sqrt.c for a case where this could be used).
Tested mips64.
* sysdeps/mips/math_private.h [__mips_hard_float]
(libc_feresetround_ctx): Define to libc_feupdateenv_mips_ctx not
libc_feresetround_mips_ctx.
[__mips_hard_float] (libc_feresetroundf_ctx): Likewise.
[__mips_hard_float] (libc_feresetroundl_ctx): Likewise.
[__mips_hard_float] (libc_feresetround_mips_ctx): Remove.
As recently discussed
<https://sourceware.org/ml/libc-alpha/2014-02/msg00670.html>, it
doesn't seem particularly useful for libm-test-ulps files to contain
huge amounts of data on ulps for individual tests; just the global
maximum observed ulps for each function, together with the
verification of exceptions, errno and special results such as
infinities and NaNs for each test, suffices to verify that a
function's behavior on the given test inputs is within the expected
accuracy. Removing this data reduces source tree churn caused by
updates to these files when libm tests are added, and reduces the
frequency with which testsuite additions actually need libm-test-ulps
changes at all.
Accordingly, this patch removes that data, so that individual tests
get checked against the global bounds for the given function and only
generate an error if those are exceeded. Tested x86_64 (including
verifying that if an ulps value is artificially reduced, the tests do
indeed fail as they should and "make regen-ulps" generates the
expected changes).
* math/libm-test.inc (struct ulp_data): Don't refer to ulps for
individual tests in comment.
(libm-test-ulps.h): Don't refer to test_ulps in #include comment.
(prev_max_error): New variable.
(prev_real_max_error): Likewise.
(prev_imag_max_error): Likewise.
(compare_ulp_data): Don't refer to test names in comment.
(find_test_ulps): Remove function.
(find_function_ulps): Likewise.
(find_complex_function_ulps): Likewise.
(init_max_error): Take function name as argument. Look up ulps
for that function.
(print_ulps): Remove function.
(print_max_error): Use prev_max_error instead of calling
find_function_ulps.
(print_complex_max_error): Use prev_real_max_error and
prev_imag_max_error instead of calling find_complex_function_ulps.
(check_float_internal): Take max_ulp parameter instead of calling
find_test_ulps. Don't call print_ulps.
(check_float): Update call to check_float_internal.
(check_complex): Update calls to check_float_internal.
(START): Pass argument to init_max_error.
* math/gen-libm-test.pl (%results): Don't include "kind"
information.
(parse_ulps): Don't handle ulps of individual tests.
(print_ulps_file): Likewise.
(output_ulps): Likewise.
* math/README.libm-test: Update.
* manual/libm-err-tab.pl (parse_ulps): Don't handle ulps of
individual tests.
* sysdeps/aarch64/libm-test-ulps: Remove individual test ulps.
* sysdeps/alpha/fpu/libm-test-ulps: Likewise.
* sysdeps/arm/libm-test-ulps: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/ia64/fpu/libm-test-ulps: Likewise.
* sysdeps/m68k/coldfire/fpu/libm-test-ulps: Likewise.
* sysdeps/m68k/m680x0/fpu/libm-test-ulps: Likewise.
* sysdeps/microblaze/libm-test-ulps: Likewise.
* sysdeps/mips/mips32/libm-test-ulps: Likewise.
* sysdeps/mips/mips64/libm-test-ulps: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Likewise.
* sysdeps/powerpc/nofpu/libm-test-ulps: Likewise.
* sysdeps/s390/fpu/libm-test-ulps: Likewise.
* sysdeps/sh/libm-test-ulps: Likewise.
* sysdeps/sparc/fpu/libm-test-ulps: Likewise.
* sysdeps/tile/libm-test-ulps: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* sysdeps/hppa/fpu/libm-test-ulps: Remove individual test ulps.
This is a patch to the MIPS math_private.h file to define HAVE_RM_CTX and
implement the ctx macros. I also defined a few other macros and inline
functions that I skipped the first time.
GCC trunk now uses soft-fp for MIPS64 long double, so supporting
integration with hardware exceptions and rounding modes. This patch
updates MIPS math-tests.h accordingly not to disable exception and
rounding mode tests in this case.
Tested mips64 and ulps updated to reflect the newly run tests.
* sysdeps/mips/math-tests.h: Include <features.h>.
[!__mips_soft_float && _MIPS_SIM != _ABIO32 && __GNUC_PREREQ (4, 9)]
(ROUNDING_TESTS_long_double): Do not define.
[!__mips_soft_float && _MIPS_SIM != _ABIO32 && __GNUC_PREREQ (4, 9)]
(EXCEPTION_TESTS_long_double): Likewise.
* sysdeps/mips/mips64/libm-test-ulps: Update.
IEEE 754-2008 defines two ways in which tiny results can be detected,
"before rounding" (based on the infinite-precision result) and "after
rounding" (based on the result when rounded to normal precision as if
the exponent range were unbounded). All binary operations on an
architecture must use the same choice of how tininess is detected.
soft-fp has so far implemented only before-rounding tininess
detection. This patch adds support for after-rounding tininess
detection. A new macro _FP_TININESS_AFTER_ROUNDING is added that
sfp-machine.h must define (soft-fp is meant to be self-contained so
the existing tininess.h files aren't used here, though the information
going in sfp-machine.h has been taken from them). The soft-fp macros
dealing with raising underflow exceptions then handle the cases where
the choice matters specially, rounding a copy of the input to the
appropriate precision to see if a value that's tiny before rounding
isn't tiny after rounding.
Tested for mips64 using GCC trunk (which now uses soft-fp on MIPS, so
supporting exceptions and rounding modes for long double where not
previously supported - this is the immediate motivation for doing this
patch now) together with (a) a patch to sysdeps/mips/math-tests.h to
enable exceptions / rounding modes tests for long double for GCC 4.9
and later, and (b) corresponding changes applied to libgcc's soft-fp
and sfp-machine.h files. In the libgcc context this is also tested on
x86_64 (also an after-rounding architecture) with testcases for
__float128 that I intend to add to the GCC testsuite when updating
soft-fp there.
(To be clear: this patch does not fix any glibc bugs that were
user-visible in past releases, since after-rounding architectures
didn't use soft-fp in any affected case with support for
floating-point exceptions - so there is no corresponding Bugzilla bug.
Rather, it works together with the GCC changes to use soft-fp on MIPS
to allow previously absent long double functionality to work properly,
and allows soft-fp to be used in glibc on after-rounding architectures
in cases where it couldn't previously be used.)
* soft-fp/op-common.h (_FP_DECL): Mark exponent as possibly
unused.
(_FP_PACK_SEMIRAW): Determine tininess based on rounding shifted
value if _FP_TININESS_AFTER_ROUNDING and unrounded value is in
subnormal range.
(_FP_PACK_CANONICAL): Determine tininess based on rounding to
normal precision if _FP_TININESS_AFTER_ROUNDING and unrounded
value has largest subnormal exponent.
* soft-fp/soft-fp.h [FP_NO_EXCEPTIONS]
(_FP_TININESS_AFTER_ROUNDING): Undefine and redefine to 0.
* sysdeps/aarch64/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): New macro.
* sysdeps/alpha/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/arm/soft-fp/sfp-machine.h (_FP_TININESS_AFTER_ROUNDING):
Likewise.
* sysdeps/mips/mips64/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/mips/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/powerpc/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/sh/soft-fp/sfp-machine.h (_FP_TININESS_AFTER_ROUNDING):
Likewise.
* sysdeps/sparc/sparc32/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/sparc/sparc64/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/tile/sfp-machine.h (_FP_TININESS_AFTER_ROUNDING):
Likewise.
MIPS has its own version of dl-lookup.c to deal with differences
between undefined symbol semantics in the PIC and non-PIC ABIs. This
is often liable to get out of date with respect to the generic file
(for example, the recent __builtin_expect changes didn't cover ports,
and it's not obvious to anyone changing dl-lookup.c that there would
be architecture-specific versions).
This patch adds a macro that dl-machine.h can define that is used in
the appropriate place in dl-lookup.c, so that MIPS no longer needs its
own version of that file.
Tested for mips64 that the only changes to disassembly of installed
shared libraries appear to be ld.so changes attributable to different
line numbers and paths in assertions.
* elf/dl-lookup.c (ELF_MACHINE_SYM_NO_MATCH): Define if not
already defined.
(do_lookup_x): Use ELF_MACHINE_SYM_NO_MATCH.
* sysdeps/mips/dl-lookup.c: Remove.
* sysdeps/mips/dl-machine.h (ELF_MACHINE_SYM_NO_MATCH): New macro.
I've moved the MIPS port from ports to the main sysdeps hierarchy.
Beyond the README update, the move of the files was simply
git mv ports/sysdeps/mips sysdeps/mips
git mv ports/sysdeps/unix/mips sysdeps/unix/mips
git mv ports/sysdeps/unix/sysv/linux/mips sysdeps/unix/sysv/linux/mips
and in addition to the ChangeLog entries here, I put a note at the top
of ports/ChangeLog.mips similar to those in other files.
Tested that disassembly of installed shared libraries for mips is the
same before and after this patch (except for ld.so where paths in
assertions are involved, as for arm).
* sysdeps/mips: Move directory from ports/sysdeps/mips.
* sysdeps/unix/mips: Move directory from ports/sysdeps/unix/mips.
* sysdeps/unix/sysv/linux/mips: Move directory from
ports/sysdeps/unix/sysv/linux/mips.
* README: Update listing for mips-*-linux-gnu and
mips64-*-linux-gnu.
* sysdeps/mips: Move directory to ../sysdeps/mips.
* sysdeps/unix/mips: Move directory to ../sysdeps/unix/mips.
* sysdeps/unix/sysv/linux/mips: Move directory to
../sysdeps/unix/sysv/linux/mips.
* math/multc3.c: New file.
* sysdeps/unix/sysv/linux/sparc/sparc32/Makefile
[$(subdir) = math] (libm-routines): Add multc3, divtc3.
* sysdeps/unix/sysv/linux/sparc/sparc32/fpu/Implies: New file.
* sysdeps/sparc/sparc32/fpu/s_fabsl.c: Include math.h and
math_ldbl_opt.h.
(fabsl): Use long_double_symbol instead of weak_alias.
* sysdeps/sparc/sparc32/fpu/s_fabs.c: Include math.h and
math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (fabsl): Add compat_symbol.
2006-01-31 Martin Schwidefsky <schwidefsky@de.ibm.com>
Jakub Jelinek <jakub@redhat.com>
* sysdeps/unix/sysv/linux/s390/Implies: New file.
* sysdeps/unix/sysv/linux/s390/fpu/Implies: New file.
* sysdeps/unix/sysv/linux/s390/nldbl-abi.h: New file.
* sysdeps/s390/fpu/bits/mathinline.h (signbitl, sqrtl): New inlines.
* sysdeps/s390/bits/mathdef.h: New file.
* sysdeps/s390/fpu/e_sqrtl.c: New file.
* sysdeps/s390/s390-32/bits/wordsize.h (__LONG_DOUBLE_MATH_OPTIONAL,
__NO_LONG_DOUBLE_MATH): Define.
* sysdeps/s390/s390-64/bits/wordsize.h: Likewise.
* sysdeps/s390/Implies: Add ieee754/ldbl-128.
* sysdeps/s390/ldbl2mpn.c: File removed.
* sysdeps/s390/fpu/libm-test-ulps: Updated.
2006-01-31 Roland McGrath <roland@redhat.com>
* sysdeps/alpha/fpu/bits/mathdef.h: Moved to ...
* sysdeps/alpha/bits/mathdef.h: ... here.
* sysdeps/i386/fpu/bits/mathdef.h: Moved to ...
* sysdeps/i386/bits/mathdef.h: ... here.
* sysdeps/mips/fpu/bits/mathdef.h: Moved to ...
* sysdeps/mips/bits/mathdef.h: ... here.
* sysdeps/m68k/fpu/bits/mathdef.h: Moved to ...
* sysdeps/m68k/bits/mathdef.h: ... here.
* sysdeps/powerpc/fpu/bits/mathdef.h: Moved to ...
* sysdeps/powerpc/bits/mathdef.h: ... here.
* sysdeps/sparc/fpu/bits/mathdef.h: Moved to ...
* sysdeps/sparc/bits/mathdef.h: ... here.
* sysdeps/ia64/fpu/bits/mathdef.h: Moved to ...
* sysdeps/ia64/bits/mathdef.h: ... here.
* sysdeps/sh/sh4/fpu/bits/mathdef.h: Moved to ...
* sysdeps/sh/sh4/bits/mathdef.h: ... here.
* sysdeps/x86_64/fpu/bits/mathdef.h: Moved to ...
* sysdeps/x86_64/bits/mathdef.h: ... here.
2006-01-31 Jakub Jelinek <jakub@redhat.com>
* sysdeps/i386/jmpbuf-unwind.h: New file, moved from nptl/.
* sysdeps/mips/jmpbuf-unwind.h: New file, moved from nptl/.
* sysdeps/powerpc/jmpbuf-unwind.h: New file, moved from nptl/.
* sysdeps/s390/jmpbuf-unwind.h: New file, moved from nptl/.
* sysdeps/sh/jmpbuf-unwind.h: New file, moved from nptl/.
* sysdeps/sparc/sparc32/jmpbuf-unwind.h: New file, moved from nptl/.
* sysdeps/sparc/sparc64/jmpbuf-unwind.h: New file, moved from nptl/.
* sysdeps/x86_64/jmpbuf-unwind.h: New file, moved from nptl/.
protection and allow pthread.h to include bits/setjmp.h as well as
setjmp.h.
* sysdeps/m68k/bits/setjmp.h: Likewise.
* sysdeps/s390/bits/setjmp.h: Make sure only setjmp.h or pthread.h
are allow to include bits/setjmp.h.
* sysdeps/mips/bits/setjmp.h (_JMPBUF_UNWINDS): Cast rhs to match lhs
cast of address.
* sysdeps/sh/bits/setjmp.h: Likewise.
2005-11-12 Jim Meyering <jim@meyering.net>
* sysdeps/unix/opendir.c (__alloc_dir): Declare STATP parameter
to be pointer to const.
* include/dirent.h: Update decl.
__NTH instead of __THROW in the inline definition.
* sysdeps/unix/sysv/linux/mips/sys/tas.h (_test_and_set): Likewise.
* sysdeps/mips/bits/dlfcn.h (RTLD_DEEPBIND): New macro.
* sysdeps/unix/sysv/linux/mips/bits/mman.h
(PROT_GROWSDOWN, PROT_GROWSUP): New macros.
* sysdeps/unix/sysv/linux/mips/Makefile ($(objpfx)syscall-%.h):
Sort by syscalls. Make sure we get headers such as sgidefs.h from
the build tree before just-installed ones.
* sysdeps/mips/atomicity.h, sysdeps/mips/dl-machine.h,
sysdeps/mips/machine-gmon.h, sysdeps/mips/bits/setjmp.h,
sysdeps/mips/fpu/bits/mathdef.h,
sysdeps/mips/mips64/__longjmp.c,
sysdeps/mips/mips64/setjmp_aux.c,
sysdeps/unix/sysv/linux/mips/kernel_stat.h,
sysdeps/unix/sysv/linux/mips/pread.c,
sysdeps/unix/sysv/linux/mips/pread64.c,
sysdeps/unix/sysv/linux/mips/ptrace.c,
sysdeps/unix/sysv/linux/mips/pwrite.c,
sysdeps/unix/sysv/linux/mips/pwrite64.c,
sysdeps/unix/sysv/linux/mips/sigaction.c,
sysdeps/unix/sysv/linux/mips/sigcontextinfo.h,
sysdeps/unix/sysv/linux/mips/bits/fcntl.h,
sysdeps/unix/sysv/linux/mips/bits/sigcontext.h,
sysdeps/unix/sysv/linux/mips/bits/stat.h,
sysdeps/unix/sysv/linux/mips/sys/procfs.h,
sysdeps/unix/sysv/linux/mips/sys/ptrace.h,
sysdeps/unix/sysv/linux/mips/sys/tas.h,
sysdeps/unix/sysv/linux/mips/sys/ucontext.h,
sysdeps/unix/sysv/linux/mips/sys/user.h: Use standard names
for ABI macros, include sgidefs.h where appropriate.
sysdeps/unix/sysv/linux/mips/Makefile ($(objpfx)syscall-%.h):
Likewise.
sysdeps/unix/sysv/linux/mips/configure.in (asm-unistd.h):
Likewise.
sysdeps/unix/sysv/linux/mips/configure: Rebuilt.
* sysdeps/mips/dl-machine.h (ELF_DL_FRAME_SIZE)
(ELF_DL_SAVE_ARG_REGS, ELF_DL_RESTORE_ARG_REGS): For the N32
and 64 ABIs, save and restore regs $10 and $11 (a6 and a7).
