POSIX requires that we make a copy, so we allocate a new string
and free it in posix_spawn_file_actions_destroy.
Reported by David Reid, Alex Gaynor, and Glyph Lefkowitz. This bug
may have security implications.
Various glibc build / install / test code has C locale settings that
are redundant with LC_ALL=C.
LC_ALL takes precedence over LANG, so anywhere that sets LC_ALL=C
(explicitly, or through it being in the default environment for
running tests) does not need to set LANG=C. LC_ALL=C also takes
precedence over LANGUAGE, since
2001-01-02 Ulrich Drepper <drepper@redhat.com>
* intl/dcigettext.c (guess_category_value): Rewrite so that LANGUAGE
value is ignored if the selected locale is the C locale.
* intl/tst-gettext.c: Set locale for above change.
* intl/tst-translit.c: Likewise.
and so settings of LANGUAGE=C are also redundant when LC_ALL=C is
set. One test also had LC_ALL=C in its -ENV setting, although it's
part of the default environment used for tests.
This patch removes the redundant settings. It removes a suggestion in
install.texi of setting LANGUAGE=C LC_ALL=C for "make install"; the
Makefile.in target "install" already sets LC_ALL_C so there's no need
for the user to set it (and nor should there be any need for the user
to set it).
If some build machine tool used by "make install" uses a version of
libintl predating that 2001 change, and the user has LANGUAGE set, the
removal of LANGUAGE=C from the Makefile.in "install" rule could in
principle affect the user's installation. However, I don't think we
need to be concerned about pre-2001 build tools.
Tested x86_64.
* Makefile (install): Don't set LANGUAGE.
* Makefile.in (install): Likewise.
* assert/Makefile (test-assert-ENV): Remove variable.
(test-assert-perr-ENV): Likewise.
* elf/Makefile (neededtest4-ENV): Likewise.
* iconvdata/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Don't set LANGUAGE.
* io/ftwtest-sh (LANG): Remove variable.
* libio/Makefile (tst-widetext-ENV): Likewise.
* manual/install.texi (Running make install): Don't refer to
environment settings for make install.
* INSTALL: Regenerated.
* nptl/tst-tls6.sh: Don't set LANG.
* posix/globtest.sh (LANG): Remove variable.
* string/Makefile (tester-ENV): Likewise.
(inl-tester-ENV): Likewise.
(noinl-tester-ENV): Likewise.
* sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Don't set LANGUAGE.
* timezone/Makefile (build-testdata): Use $(built-program-cmd)
without explicit environment settings.
localedata/ChangeLog:
* tst-fmon.sh: Don't set LANGUAGE.
* tst-locale.sh: Likewise.
One wart in the original support for test wrappers for cross testing,
as noted in
<https://sourceware.org/ml/libc-alpha/2012-10/msg00722.html>, is the
requirement for test wrappers to pass a poorly-defined set of
environment variables from the build system to the system running the
glibc under test. Although some variables are passed explicitly via
$(test-wrapper-env), including LD_* variables that simply can't be
passed implicitly because of the side effects they'd have on the build
system's dynamic linker, others are passed implicitly, including
variables such as GCONV_PATH and LOCPATH that could potentially affect
the build system's libc (so effectively relying on any such effects
not breaking the wrappers). In addition, the code in
cross-test-ssh.sh for preserving environment variables is fragile (it
depends on how bash formats a list of exported variables, and could
well break for multi-line variable definitions where the contents
contain things looking like other variable definitions).
This patch moves to explicitly passing environment variables via
$(test-wrapper-env). Makefile variables that previously used
$(test-wrapper) are split up into -before-env and -after-env parts
that can be passed separately to the various .sh files used in
testing, so those files can then insert environment settings between
the two parts.
The common default environment settings in make-test-out are made into
a separate makefile variable that can also be passed to scripts,
rather than many scripts duplicating those settings (for testing an
installed glibc, it is desirable to have the GCONV_PATH setting on
just one place, so just that one place needs to support it pointing to
an installed sysroot instead of the build tree). The default settings
are included in the variables such as $(test-program-prefix), so that
if tests do not need any non-default settings they can continue to use
single variables rather than the split-up variables.
Although this patch cleans up LC_ALL=C settings (that being part of
the common defaults), various LANG=C and LANGUAGE=C settings remain.
Those are generally unnecessary and I propose a subsequent cleanup to
remove them. LC_ALL takes precedence over LANG, and while LANGUAGE
takes precedence over LC_ALL, it only does so for settings other than
LC_ALL=C. So LC_ALL=C on its own is sufficient to ensure the C
locale, and anything that gets LC_ALL=C does not need the other
settings.
While preparing this patch I noticed some tests with .sh files that
appeared to do nothing beyond what the generic makefile support for
tests can do (localedata/tst-wctype.sh - the makefiles support -ENV
variables and .input files - and localedata/tst-mbswcs.sh - just runs
five tests that could be run individually from the makefile). So I
propose another subsequent cleanup to move those to using the generic
support instead of special .sh files.
Tested x86_64 (native) and powerpc32 (cross).
* Makeconfig (run-program-env): New variable.
(run-program-prefix-before-env): Likewise.
(run-program-prefix-after-env): Likewise.
(run-program-prefix): Define in terms of new variables.
(built-program-cmd-before-env): New variable.
(built-program-cmd-after-env): Likewise.
(built-program-cmd): Define in terms of new variables.
(test-program-prefix-before-env): New variable.
(test-program-prefix-after-env): Likewise.
(test-program-prefix): Define in terms of new variables.
(test-program-cmd-before-env): New variable.
(test-program-cmd-after-env): Likewise.
(test-program-cmd): Define in terms of new variables.
* Rules (make-test-out): Use $(run-program-env).
* scripts/cross-test-ssh.sh (env_blacklist): Remove variable.
(help): Do not mention environment variables. Mention
--timeoutfactor option.
(timeoutfactor): New variable.
(blacklist_exports): Remove function.
(exports): Remove variable.
(command): Do not include ${exports}.
* manual/install.texi (Configuring and compiling): Do not mention
test wrappers preserving environment variables. Mention that last
assignment to a variable must take precedence.
* INSTALL: Regenerated.
* benchtests/Makefile (run-bench): Use $(run-program-env).
* catgets/Makefile ($(objpfx)test1.cat): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
($(objpfx)test2.cat): Do not specify environment variables
explicitly.
($(objpfx)de/libc.cat): Use $(built-program-cmd-before-env),
$(run-program-env) and $(built-program-cmd-after-env).
($(objpfx)test-gencat.out): Use $(test-program-cmd-before-env),
$(run-program-env) and $(test-program-cmd-after-env).
($(objpfx)sample.SJIS.cat): Do not specify environment variables
explicitly.
* catgets/test-gencat.sh: Use test_program_cmd_before_env,
run_program_env and test_program_cmd_after_env arguments.
* elf/Makefile ($(objpfx)tst-pathopt.out): Use $(run-program-env).
* elf/tst-pathopt.sh: Use run_program_env argument.
* iconvdata/Makefile ($(objpfx)iconv-test.out): Use
$(test-wrapper-env) and $(run-program-env).
* iconvdata/run-iconv-test.sh: Use test_wrapper_env and
run_program_env arguments.
* iconvdata/tst-table.sh: Do not set GCONV_PATH explicitly.
* intl/Makefile ($(objpfx)tst-gettext.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
($(objpfx)tst-gettext2.out): Likewise.
* intl/tst-gettext.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* intl/tst-gettext2.sh: Likewise.
* intl/tst-gettext4.sh: Do not set environment variables
explicitly.
* intl/tst-gettext6.sh: Likewise.
* intl/tst-translit.sh: Likewise.
* malloc/Makefile ($(objpfx)tst-mtrace.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* malloc/tst-mtrace.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* math/Makefile (run-regen-ulps): Use $(run-program-env).
* nptl/Makefile ($(objpfx)tst-tls6.out): Use $(run-program-env).
* nptl/tst-tls6.sh: Use run_program_env argument. Set LANG=C
explicitly with each use of ${test_wrapper_env}.
* posix/Makefile ($(objpfx)wordexp-tst.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* posix/tst-getconf.sh: Do not set environment variables
explicitly.
* posix/wordexp-tst.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* stdio-common/tst-printf.sh: Do not set environment variables
explicitly.
* stdlib/Makefile ($(objpfx)tst-fmtmsg.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* stdlib/tst-fmtmsg.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
Split $test calls into $test_pre and $test.
* timezone/Makefile (build-testdata): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
localedata/ChangeLog:
* Makefile ($(addprefix $(objpfx),$(CTYPE_FILES))): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
($(objpfx)sort-test.out): Use $(test-program-prefix-before-env),
$(run-program-env) and $(test-program-prefix-after-env).
($(objpfx)tst-fmon.out): Use $(run-program-prefix-before-env),
$(run-program-env) and $(run-program-prefix-after-env).
($(objpfx)tst-locale.out): Use $(built-program-cmd-before-env),
$(run-program-env) and $(built-program-cmd-after-env).
($(objpfx)tst-trans.out): Use $(run-program-prefix-before-env),
$(run-program-env), $(run-program-prefix-after-env),
$(test-program-prefix-before-env) and
$(test-program-prefix-after-env).
($(objpfx)tst-ctype.out): Use $(test-program-cmd-before-env),
$(run-program-env) and $(test-program-cmd-after-env).
($(objpfx)tst-wctype.out): Likewise.
($(objpfx)tst-langinfo.out): Likewise.
($(objpfx)tst-langinfo-static.out): Likewise.
* gen-locale.sh: Use localedef_before_env, run_program_env and
localedef_after_env arguments.
* sort-test.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* tst-ctype.sh: Use tst_ctype_before_env, run_program_env and
tst_ctype_after_env arguments.
* tst-fmon.sh: Use run_program_prefix_before_env, run_program_env
and run_program_prefix_after_env arguments.
* tst-langinfo.sh: Use tst_langinfo_before_env, run_program_env
and tst_langinfo_after_env arguments.
* tst-locale.sh: Use localedef_before_env, run_program_env and
localedef_after_env arguments.
* tst-mbswcs.sh: Do not set environment variables explicitly.
* tst-numeric.sh: Likewise.
* tst-rpmatch.sh: Likewise.
* tst-trans.sh: Use run_program_prefix_before_env,
run_program_env, run_program_prefix_after_env,
test_program_prefix_before_env and test_program_prefix_after_env
arguments.
* tst-wctype.sh: Use tst_wctype_before_env, run_program_env and
tst_wctype_after_env arguments.
Tests run using the default $(make-test-out) automatically get
GCONV_PATH and LC_ALL set, whether or not those environment variables
are actually needed for the individual test. However, they do not get
LOCPATH set, meaning that a large number of tests have -ENV settings
just to set LOCPATH.
This patch moves LOCPATH into the default environment used for all
tests, on the principle that like GCONV_PATH any settings needed to
use files associated with the newly built library, rather than any old
installed files, are appropriate to use by default.
A further motivation is that various tests using .sh files also set
some combination of LC_ALL, GCONV_PATH and LOCPATH. Preferably .sh
files should also use the default environment with any additions
required for the individual test. Now, it was suggested in
<https://sourceware.org/ml/libc-alpha/2014-05/msg00715.html> that
various Makefile variables used in testing should be derived by
composing the -before-env and -after-env variables used when explicit
environment settings are required. With such a change, it's also
natural for those variables to include the default settings (via some
intermediate makefile variable also used in make-test-out).
Because some .sh files only set variables that correspond to the
default settings, or a subset thereof, and this applies to more of the
.sh files once LOCPATH is in the default settings, doing so reduces
the size of a revised version of
<https://sourceware.org/ml/libc-alpha/2014-05/msg00596.html>: scripts
only needing the (expanded) default settings will not need to receive
the separate -before-env and -after-env variables, only the single
variable they do at present. So moving LOCPATH into the default
settings can reduce churn caused by subsequent patches.
Tested x86_64 and x86.
* Rules (make-test-out): Include
LOCPATH=$(common-objpfx)localedata in default environment.
* debug/Makefile (tst-chk1-ENV): Remove variable.
(tst-chk2-ENV): Likewise.
(tst-chk3-ENV): Likewise.
(tst-chk4-ENV): Likewise.
(tst-chk5-ENV): Likewise.
(tst-chk6-ENV): Likewise.
(tst-lfschk1-ENV): Likewise.
(tst-lfschk2-ENV): Likewise.
(tst-lfschk3-ENV): Likewise.
(tst-lfschk4-ENV): Likewise.
(tst-lfschk5-ENV): Likewise.
(tst-lfschk6-ENV): Likewise.
* iconvdata/Makefile (bug-iconv6-ENV): Likewise.
(tst-iconv7-ENV): Likewise.
* intl/Makefile (LOCPATH-ENV): Likewise.
(tst-codeset-ENV): Likewise.
(tst-gettext3-ENV): Likewise.
(tst-gettext5-ENV): Likewise.
* libio/Makefile (tst-widetext-ENV): Don't set LOCPATH.
(tst-fopenloc-ENV): Likewise.
(tst-fgetws-ENV): Remove variable.
(tst-ungetwc1-ENV): Likewise.
(tst-ungetwc2-ENV): Likewise.
(bug-ungetwc2-ENV): Likewise.
(tst-swscanf-ENV): Likewise.
(bug-ftell-ENV): Likewise.
(tst-fgetwc-ENV): Likewise.
(tst-fseek-ENV): Likewise.
(tst-ftell-partial-wide-ENV): Likewise.
(tst-ftell-active-handler-ENV): Likewise.
(tst-ftell-append-ENV): Likewise.
* posix/Makefile (tst-fnmatch-ENV): Likewise.
(tst-regexloc-ENV): Likewise.
(bug-regex1-ENV): Likewise.
(tst-regex-ENV): Likewise.
(tst-regex2-ENV): Likewise.
(bug-regex5-ENV): Likewise.
(bug-regex6-ENV): Likewise.
(bug-regex17-ENV): Likewise.
(bug-regex18-ENV): Likewise.
(bug-regex19-ENV): Likewise.
(bug-regex20-ENV): Likewise.
(bug-regex22-ENV): Likewise.
(bug-regex23-ENV): Likewise.
(bug-regex25-ENV): Likewise.
(bug-regex26-ENV): Likewise.
(bug-regex30-ENV): Likewise.
(bug-regex32-ENV): Likewise.
(bug-regex33-ENV): Likewise.
(bug-regex34-ENV): Likewise.
(bug-regex35-ENV): Likewise.
(tst-rxspencer-ENV): Likewise.
(tst-rxspencer-no-utf8-ENV): Likewise.
* stdio-common/Makefile (tst-sprintf-ENV): Likewise.
(tst-sscanf-ENV): Likewise.
(tst-swprintf-ENV): Likewise.
(tst-swscanf-ENV): Likewise.
(test-vfprintf-ENV): Likewise.
(scanf13-ENV): Likewise.
(bug14-ENV): Likewise.
(tst-grouping-ENV): Likewise.
* stdlib/Makefile (tst-strtod-ENV): Likewise.
(tst-strtod3-ENV): Likewise.
(tst-strtod4-ENV): Likewise.
(tst-strtod5-ENV): Likewise.
(testmb2-ENV): Likewise./
* string/Makefile (tst-strxfrm-ENV): Likewise.
(tst-strxfrm2-ENV): Likewise.
(bug-strcoll1-ENV): Likewise.
(test-strcasecmp-ENV): Likewise.
(test-strncasecmp-ENV): Likewise.
* time/Makefile (tst-strptime-ENV): Likewise.
(tst-ftime_l-ENV): Likewise.
* wcsmbs/Makefile (tst-btowc-ENV): Likewise.
(tst-mbrtowc-ENV): Likewise.
(tst-wcrtomb-ENV): Likewise.
(tst-mbrtowc2-ENV): Likewise.
(tst-c16c32-1-ENV): Likewise.
(tst-mbsnrtowcs-ENV): Likewise.
localedata/ChangeLog:
* Makefile (TEST_MBWC_ENV): Remove variable.
(tst_iswalnum-ENV): Likewise.
(tst_iswalpha-ENV): Likewise.
(tst_iswcntrl-ENV): Likewise.
(tst_iswctype-ENV): Likewise.
(tst_iswdigit-ENV): Likewise.
(tst_iswgraph-ENV): Likewise.
(tst_iswlower-ENV): Likewise.
(tst_iswprint-ENV): Likewise.
(tst_iswpunct-ENV): Likewise.
(tst_iswspace-ENV): Likewise.
(tst_iswupper-ENV): Likewise.
(tst_iswxdigit-ENV): Likewise.
(tst_mblen-ENV): Likewise.
(tst_mbrlen-ENV): Likewise.
(tst_mbrtowc-ENV): Likewise.
(tst_mbsrtowcs-ENV): Likewise.
(tst_mbstowcs-ENV): Likewise.
(tst_mbtowc-ENV): Likewise.
(tst_strcoll-ENV): Likewise.
(tst_strfmon-ENV): Likewise.
(tst_strxfrm-ENV): Likewise.
(tst_swscanf-ENV): Likewise.
(tst_towctrans-ENV): Likewise.
(tst_towlower-ENV): Likewise.
(tst_towupper-ENV): Likewise.
(tst_wcrtomb-ENV): Likewise.
(tst_wcscat-ENV): Likewise.
(tst_wcschr-ENV): Likewise.
(tst_wcscmp-ENV): Likewise.
(tst_wcscoll-ENV): Likewise.
(tst_wcscpy-ENV): Likewise.
(tst_wcscspn-ENV): Likewise.
(tst_wcslen-ENV): Likewise.
(tst_wcsncat-ENV): Likewise.
(tst_wcsncmp-ENV): Likewise.
(tst_wcsncpy-ENV): Likewise.
(tst_wcspbrk-ENV): Likewise.
(tst_wcsrtombs-ENV): Likewise.
(tst_wcsspn-ENV): Likewise.
(tst_wcsstr-ENV): Likewise.
(tst_wcstod-ENV): Likewise.
(tst_wcstok-ENV): Likewise.
(tst_wcstombs-ENV): Likewise.
(tst_wcswidth-ENV): Likewise.
(tst_wcsxfrm-ENV): Likewise.
(tst_wctob-ENV): Likewise.
(tst_wctomb-ENV): Likewise.
(tst_wctrans-ENV): Likewise.
(tst_wctype-ENV): Likewise.
(tst_wcwidth-ENV): Likewise.
(tst-digits-ENV): Likewise.
(tst-mbswcs6-ENV): Likewise.
(tst-xlocale1-ENV): Likewise.
(tst-xlocale2-ENV): Likewise.
(tst-strfmon1-ENV): Likewise.
(tst-strptime-ENV): Likewise.
(tst-setlocale-ENV): Don't set LOCPATH.
(bug-iconv-trans-ENV): Remove variable.
(tst-sscanf-ENV): Likewise.
(tst-leaks-ENV): Don't set LOCPATH.
(bug-setlocale1-ENV): Remove variable.
(bug-setlocale1-static-ENV): Likewise.
(tst-setlocale2-ENV): Likewise.
As noted in bug 16978, older POSIX versions include
in the specified contents of <tar.h>, with only the 2001 edition
introducing the notion of XSI-conditional definitions and conditioning
that definition. Thus, this macro should be defined for
!__USE_XOPEN2K as well as for __USE_XOPEN, and this patch duly defines
it in that case. Tested x86_64.
[BZ #16978]
* posix/tar.h [!__USE_XOPEN2K] (TSVTX): Define macro.
* conform/Makefile (test-xfail-POSIX/tar.h/conform): Remove
variable.
This patch fixes one of the header namespace issues shown up by
conformtest, <sched.h> failing to expose all symbols from <time.h> as
required by older standards. The patch keeps the existing behavior if
__USE_XOPEN2K is defined (the default; POSIX.1-2001 was the version
that made it optional to expose these symbols), but ensures that all
the symbols from <time.h> are exposed if an older standard is
selected. Tested x86_64.
[BZ #16670]
* posix/sched.h [!__USE_XOPEN2K] (__need_time_t): Don't define
before #include of <time.h>.
[!__USE_XOPEN2K] (__need_timespec): Likewise.
* conform/Makefile (test-xfail-POSIX/sched.h/conform): Remove.
(test-xfail-UNIX98/sched.h/conform): Likewise.
This patch systematically renames miscellaneous tests so their outputs
use a *.out name (unless the test is just running some glibc program
with its conventional output file name, rather than a special program
at all, as in catgets tests generating *.cat). In the case of the
iconv test test-iconvconfig, output is redirected where it wasn't
before.
In various places the "generated" variable is updated to reflect the
revised test names; in iconvdata/Makefile a typo (mmtrace-tst-loading)
is also fixed. resolv/Makefile sets both "generate" (which appears
unused) and "generated". Bitrot in the settings of these variables
could no doubt be fixed so that "make clean" after build and testing
leaves results the same as after configure (and indeed the
tests-special / xtests-special variables could be used to simplify
things, by removing those files automatically rather than listing them
manually in these variables), and "make distclean" leaves an empty
build directory, but right now it appears various files don't get
deleted. I think they are liable to continue to bitrot in the absence
of routine testing that these targets actually work, given that
building in the source directory isn't supported and that was the main
use of such makefile targets.
Tested x86_64.
* elf/Makefile (tests-special): Rename tests to end with .out.
($(objpfx)noload-mem): Likewise.
($(objpfx)tst-leaks1-mem): Likewise.
($(objpfx)tst-leaks1-static-mem.out): Likewise.
* iconv/Makefile (xtests-special): Change test-iconvconfig to
$(objpfx)test-iconvconfig.out.
(test-iconvconfig): Change to $(objpfx)test-iconvconfig.out. Use
set -e inside subshell and redirect output to file.
* iconvdata/Makefile (generated): Rename tests to end with .out.
Correct type.
(tests-special): Rename tests to end with .out.
($(objpfx)mtrace-tst-loading): Likewise.
* intl/Makefile (generated): Likewise.
(tests-special): Likewise.
($(objpfx)mtrace-tst-gettext): Likewise.
* misc/Makefile (generated): Likewise.
(tests-special): Likewise.
($(objpfx)tst-error1-mem): Likewise.
* nptl/Makefile (tests-special): Likewise.
($(objpfx)tst-stack3-mem): Likewise.
(generated): Likewise.
* posix/Makefile (generated): Likewise.
(tests-special): Likewise.
(xtests-special): Likewise.
($(objpfx)tst-fnmatch-mem): Likewise.
($(objpfx)bug-regex2-mem): Likewise.
($(objpfx)bug-regex14-mem): Likewise.
($(objpfx)bug-regex21-mem): Likewise.
($(objpfx)bug-regex31-mem): Likewise.
($(objpfx)tst-vfork3-mem): Likewise.
($(objpfx)tst-rxspencer-no-utf8-mem): Likewise.
($(objpfx)tst-pcre-mem): Likewise.
($(objpfx)tst-boost-mem): Likewise.
($(objpfx)bug-ga2-mem): Likewise.
($(objpfx)bug-glob2-mem): Likewise.
* resolv/Makefile (generate): Likewise.
(tests-special): Likewise.
(xtests-special): Likewise.
(generated): Likewise.
($(objpfx)mtrace-tst-leaks): Likewise.
($(objpfx)mtrace-tst-leaks2): Likewise.
localedata:
* Makefile (generated): Rename tests to end with .out.
(tests-special): Likewise.
($(objpfx)mtrace-tst-leaks): Likewise.
This patch is a revised and updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>.
In order to generate overall summaries of the results of all tests in
the glibc testsuite, we need to identify and concatenate the files
with the results of individual tests.
Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this.
However, the normal glibc approach is explicit enumeration of the
expected set of files with a given property, rather than all files
matching some pattern like that. Furthermore, we would like to be
able to mark tests as UNRESOLVED if the file with their results is for
some reason missing, and in future we would like to be able to mark
tests as UNSUPPORTED if they are disabled for a particular
configuration (rather than simply having them missing from the list of
tests as at present). Such handling of tests that were not run or did
not record results requires an explicit enumeration of tests.
For the tests following the default makefile rules, $(tests) (and
$(xtests)) provides such an enumeration. Others, however, are added
directly as dependencies of the "tests" and "xtests" makefile
targets. This patch changes the makefiles to put them in variables
tests-special and xtests-special, with appropriate dependencies on the
tests listed there then being added centrally.
Those variables are used in Rules and so need to be set before Rules
is included in a subdirectory makefile, which is often earlier in the
makefile than the dependencies were present before. We previously
discussed the question of where to include Rules; see the question at
<https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a
discussion in
<https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why
Rules is included early rather than late in subdirectory makefiles.
It was necessary to avoid an indirection through the check-abi target
and get the check-abi-* targets for individual libraries into the
tests-special variable. The intl/ test $(objpfx)tst-gettext.out,
previously built only because of dependencies from other tests, was
also added to tests-special for the same reason.
The entries in tests-special are the full makefile targets, complete
with $(objpfx) and .out. If a future change causes tests to be named
consistently with a .out suffix, this can be changed to include just
the path relative to $(objpfx), without .out.
Tested x86_64, including that the same set of files is generated in
the build directory by a build and testsuite run both before and after
the patch (except for changes to the
elf/tst-null-argv.debug.out.<number> file name), and a build with
run-built-tests=no to verify there aren't any more obvious instances
of the issue Marcus Shawcroft reported with a previous version in
<https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>.
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(tests): Depend on $(tests-special).
* Makerules (check-abi-list): New variable.
(check-abi): Depend on $(check-abi-list).
[$(subdir) = elf] (tests-special): Add
$(objpfx)check-abi-libc.out.
[$(build-shared) = yes && subdir] (tests-special): Add
$(check-abi-list).
[$(build-shared) = yes && subdir] (tests): Do not depend on
check-abi.
* Rules (tests): Depend on $(tests-special).
(xtests): Depend on $(xtests-special).
* catgets/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* conform/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* elf/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* grp/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* iconv/Makefile (xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* iconvdata/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* intl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable. Also add
$(objpfx)tst-gettext.out.
* io/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* libio/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* malloc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* misc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl_db/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* posix/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* resolv/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* stdio-common/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(do-tst-unbputc): Remove target.
(do-tst-printf): Likewise.
* stdlib/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* string/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* sysdeps/x86/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
localedata:
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
This patch, an updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00195.html>, makes it
possible for .test-result files for individual tests to contain XPASS
and XFAIL rather than PASS and FAIL in cases where failure is
expected. This replaces the marking of two individual tests with "-"
to cause them to be expected at makefile level to fail;
evaluate-test.sh will ensure it exits with status 0 for an expected
failure.
Tested x86_64.
* scripts/evaluate-test.sh: Take new argument indicating whether
failure is expected.
* Makeconfig (evaluate-test): Pass argument to evaluate-test.sh
indicating whether failure is expected.
* conform/Makefile (test-xfail-run-conformtest): New variable.
($(objpfx)run-conformtest.out): Don't expect to fail at makefile
level.
* posix/Makefile (test-xfail-annexc): New variable.
($(objpfx)annexc.out): Don't expect to fail at makefile level.
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I
noted it was necessary to add includes of Makeconfig early in various
subdirectory makefiles for the tests-special variable settings added
by that patch to be conditional on configuration information. No-one
commented on the general question there of whether Makeconfig should
always be included immediately after the definition of subdir.
This patch implements that early inclusion of Makeconfig in each
directory (which is a lot easier than consistent placement of includes
of Rules). Includes are added if needed, or moved up if already
present. Subdirectory "all:" targets are removed, since Makeconfig
provides one.
There is potential for further cleanups I haven't done. Rules and
Makerules have code such as
ifneq "$(findstring env,$(origin headers))" ""
headers :=
endif
to override to empty any value of various variables that came from the
environment. I think there is a case for Makeconfig setting all the
subdirectory variables (other than subdir) to empty to ensure no
outside value is going to take effect if a subdirectory fails to
define a variable. (A list of such variables, possibly out of date
and incomplete, is in manual/maint.texi.) Rules and Makerules would
give errors if Makeconfig hadn't already been included, instead of
including it themselves. The special code to override values coming
from the environment would then be obsolete and could be removed.
Tested x86_64, including that installed binaries are identical before
and after the patch.
* argp/Makefile: Include Makeconfig immediately after defining
subdir.
* assert/Makefile: Likewise.
* benchtests/Makefile: Likewise.
* catgets/Makefile: Likewise.
* conform/Makefile: Likewise.
* crypt/Makefile: Likewise.
* csu/Makefile: Likewise.
(all): Remove target.
* ctype/Makefile: Include Makeconfig immediately after defining
subdir.
* debug/Makefile: Likewise.
* dirent/Makefile: Likewise.
* dlfcn/Makefile: Likewise.
* gmon/Makefile: Likewise.
* gnulib/Makefile: Likewise.
* grp/Makefile: Likewise.
* gshadow/Makefile: Likewise.
* hesiod/Makefile: Likewise.
* hurd/Makefile: Likewise.
(all): Remove target.
* iconvdata/Makefile: Include Makeconfig immediately after
defining subdir.
* inet/Makefile: Likewise.
* intl/Makefile: Likewise.
* io/Makefile: Likewise.
* libio/Makefile: Likewise.
(all): Remove target.
* locale/Makefile: Include Makeconfig immediately after defining
subdir.
* login/Makefile: Likewise.
* mach/Makefile: Likewise.
(all): Remove target.
* malloc/Makefile: Include Makeconfig immediately after defining
subdir.
(all): Remove target.
* manual/Makefile: Include Makeconfig immediately after defining
subdir.
* math/Makefile: Likewise.
* misc/Makefile: Likewise.
* nis/Makefile: Likewise.
* nss/Makefile: Likewise.
* po/Makefile: Likewise.
(all): Remove target.
* posix/Makefile: Include Makeconfig immediately after defining
subdir.
* pwd/Makefile: Likewise.
* resolv/Makefile: Likewise.
* resource/Makefile: Likewise.
* rt/Makefile: Likewise.
* setjmp/Makefile: Likewise.
* shadow/Makefile: Likewise.
* signal/Makefile: Likewise.
* socket/Makefile: Likewise.
* soft-fp/Makefile: Likewise.
* stdio-common/Makefile: Likewise.
* stdlib/Makefile: Likewise.
* streams/Makefile: Likewise.
* string/Makefile: Likewise.
* sunrpc/Makefile: Likewise.
(all): Remove target.
* sysvipc/Makefile: Include Makeconfig immediately after defining
subdir.
* termios/Makefile: Likewise.
* time/Makefile: Likewise.
* timezone/Makefile: Likewise.
(all): Remove target.
* wcsmbs/Makefile: Include Makeconfig immediately after defining
subdir.
* wctype/Makefile: Likewise.
libidn/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
localedata/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
(all): Remove target.
nptl/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
nptl_db/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
Most glibc tests that use mtrace to verify that there were no memory
leaks from the glibc facilities used in a given test depend on the
.out file of the previous test so that the mtrace test runs mtrace and
nothing else.
Two, however, have a single target combining mtrace with something
else. In the case of libio/tst-fopenloc.check, the test both compares
the output with an expected baseline and runs mtrace. In the case of
posix/tst-rxspencer-mem, the test is run (with different command line
from the main run) and then mtrace is run, from the same makefile
target.
This patch splits both of these tests up to use separate makefile
targets for each thing tested; in the tst-rxspencer case, a file
tst-rxspencer-no-utf8.c is created that just includes tst-rxspencer.c,
as is usual for tests where the same code gets tested in different
compile-time or runtime configurations.
Adding $(evaluate-test) to test commands, as in
<https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html>, will no
longer need to insert && between multiple commands, as all tests will
either have just a single command or already use &&.
Tested x86_64.
* libio/Makefile ($(objpfx)tst-fopenloc.check): Split into
separate $(objpfx)tst-fopenloc-cmp.out and
$(objpfx)tst-fopenloc-mem.out targets.
(tests): Update dependencies.
* posix/Makefile (tests variable): Add tst-rxspencer-no-utf8.
(generated): Change tst-rxspencer-mem and tst-rxspencer.mtrace to
tst-rxspencer-no-utf8-mem and tst-rxspencer-no-utf8.mtrace.
(tst-rxspencer-no-utf8-ARGS): New variable.
(tst-rxspencer-no-utf8-ENV): Likewise.
(tests target): Depend on $(objpfx)tst-rxspencer-no-utf8-mem
instead of $(objpfx)tst-rxspencer-mem.
($(objpfx)tst-rxspencer-mem): Change target to
$(objpfx)tst-rxspencer-no-utf8-mem. Depend on
$(objpfx)tst-rxspencer-no-utf8.out instead of running test program.
* posix/tst-rxspencer-no-utf8.c: New file.
This patch cleans up cases of __USE_MISC that are trivially redundant
after the recent substitution of __USE_MISC for __USE_BSD and
__USE_SVID: either in constructs such as "defined __USE_MISC ||
defined __USE_MISC", or else (in the bits/mman.h case) a conditional
on __USE_MISC nested inside another __USE_MISC conditional. (The
cleanups remaining after this patch are still quite large, but it
seems a reasonable piece to separate out.)
Tested x86_64.
* bits/mman.h [__USE_MISC]: Remove redundant conditionals.
* ctype/ctype.h [__USE_MISC]: Likewise.
* dirent/dirent.h [__USE_MISC]: Likewise.
* grp/grp.h [__USE_MISC]: Likewise.
* io/fcntl.h [__USE_MISC]: Likewise.
* io/sys/stat.h [__USE_MISC]: Likewise.
* libio/stdio.h [__USE_MISC]: Likewise.
* posix/unistd.h [__USE_MISC]: Likewise.
* pwd/pwd.h [__USE_MISC]: Likewise.
* stdlib.h [__USE_MISC]: Likewise.
* string/bits/string2.h [__USE_MISC]: Likewise.
* string/string.h [__USE_MISC]: Likewise.
* time/time.h [__USE_MISC]: Likewise.
As detailed in PR11157, the use of '__block' is known to interfere
with keywords in some environments, such as the Clang -fblocks extension.
Recently a similar issue was raised concerning the use of '__unused'
and a '__glibc' prefix was proposed to create a glibc implementation
namespace for these sorts of issues [1]. This patches takes that
approach.
[1] https://sourceware.org/ml/libc-alpha/2012-02/msg00047.html
[2] http://lists.debian.org/debian-glibc/2013/11/msg00020.html
Colin Watson reported that some versions of gcc warn about
attribute leaf used on a static function, since it has no
effect on anything but external functions.
* posix/glob.c (next_brace_sub, prefix_array, collated_compare):
Use __THROWNL rather than __THROW on static functions.
Signed-off-by: Eric Blake <eblake@redhat.com>
This helps testing for regression of BZ#15339. Creation of network
isolated environments is a privileged operation and therefore is not
included to the test.
Fixes BZ #12723
The variable pipe buffer size does nothing to the value of PIPE_BUF,
since the number of bytes that are atomically written is still
PIPE_BUF on Linux.
* sysdeps/posix/getaddrinfo.c (default_scopes): Map RFC 1918
* addresses
to global scope.
* posix/tst-rfc3484.c: Verify 10/8, 172.16/12 and 196.128/16
addresses are in the same scope as 192.0.2/24.
* posix/gai.conf: Document new scope table defaults.
* posix/regex_internal.c (re_string_skip_chars): Fix miscomputation
of remain_len that may cause incomplete multi-byte character and
false match.
* posix/bug-regex33.c: New file.
* posix/Makefile (tests): Add bug-regex33.
The problem is that parse_bracket_symbol is miscompiled, and it turns
out it is because of an incorrect attribute on re_string_fetch_byte_case.
Unlike re_string_peek_byte_case, this one is really not pure, it modifies memory
(increments pstr->cur_idx), and with the pure attribute GCC assumed it doesn't
and it cached the presumed value of regexp->cur_idx in a variable across the
for (;; ++i)
{
if (i >= BRACKET_NAME_BUF_SIZE)
return REG_EBRACK;
if (token->type == OP_OPEN_CHAR_CLASS)
ch = re_string_fetch_byte_case (regexp);
else
ch = re_string_fetch_byte (regexp);
if (re_string_eoi(regexp))
return REG_EBRACK;
if (ch == delim && re_string_peek_byte (regexp, 0) == ']')
break;
elem->opr.name[i] = ch;
}
According to the getopt documentation, if "W;" is part of optstring, then '-W
foo' should behave like '--foo'. But if "foo" uses an optional_argument, this
is not the case, since optarg is not NULL when using -W.
This is another bug in computing the fastmap. It was reported by a user
of sed because it usually does not happen with !_LIBC. However, it is
there in that case too.
The bug is that whenever we have a range at the beginning of the regex,
the regex must be tested on any possible multibyte character. The reason
why _LIBC masks it, is that in general there is a collation symbol for
each possible multibyte-character lead byte, so all the lead bytes are
in general already part of the fastmap.
The tests use cyrillic characters as an example. With _LIBC, they pass
without the patch too, but you can make them fail by removing collation
symbols handling.
The posix/tst-rfc3484* test cases caused warnings in newer gccs
because the unused but copied sin_zero part of sockaddr_in wasn't
explicitly initialized.
_POSIX2_C_DEV, _POSIX2_SW_DEV, _POSIX2_LOCALEDEF): Define to
200809L instead of 200112L.
(_XOPEN_VERSION): For __USE_XOPEN2K8 define to 700.
* posix/tst-sysconf.c (STDVER): Define to 200809L instead of 200112L.
2009-03-10 Jakub Jelinek <jakub@redhat.com>
* wcsmbs/wchar.h: mbsnrtowcs, open_wmemstream, wcpcpy, wcpncpy,
wcscasecmp, wcsdup, wcsncasecmp, wcsnlen, wcsnrtombs,
wcscasecmp_l, wcsncasecmp_l, wcscoll_l, and wcsxfrm_l.
* sysdeps/mach/hurd/bits/posix_opt.h: Reset value of macros from
200112L to 200809L.
* sysdeps/unix/sysv/linux/bits/posix_opt.h: Likewise.
* posix/getconf.c (vars): Add _SC_THREAD_ROBUST_PRIO_INHERIT and
_SC_THREAD_ROBUST_PRIO_PROTECT entries.
* bits/confname.h: Add _SC_THREAD_ROBUST_PRIO_INHERIT and
_SC_THREAD_ROBUST_PRIO_PROTECT.
* posix/unistd.h: fexecve is in POSIX 2008.
* time/time.h: strftime_l is in POSIX 2008.
* io/sys/stat.h: futimens is in POSIX 2008.
* string/strings.h: strcasecmp_l and strncasecmp_l are in POSIX 2008.
* string/string.h: stpcpy, stpncpy, strndup, strnlen, strsignal,
strcoll_l, strerror_l, and strxfrm_l are in POSIX 2008.
* stdlib/stdlib.h: mkdtemp is in POSIX 2008.
by default a POSIX mode, also define __USE_POSIX_IMPLICITLY.
* posix/Versions: Export __posix_getopt.
* posix/getopt.c (_getopt_initialize): Take additional parameter.
Use it to alternatively initialize __posixly_correct.
(_getopt_internal_r): Take addition parameter. Pass on to
_getopt_initialize.
(_getopt_internal): Take addition parameter. Pass on to
_getopt_internal_r.
(getopt): Pass additional zero to _getopt_internal.
(__posix_getopt): New function.
* posix/getopt.h: Add redirection for getopt.
* posix/getopt1.c (getopt_long): Pass additional zero to
_getopt_internal.
(getopt_long_only): Likewise.
(_getopt_long_r): Pass additional zero to _getopt_internal_r.
(_getopt_long_only_r): Likewise.
* posix/getopt_int.h: Adjust declarations of _getopt_internal and
_getopt_internal_r.
* elf/ldd.bash.in: Likewise.
* elf/sprof.c: Likewise.
* locale/programs/locale.c: Likewise.
* malloc/memusage.sh: Likewise.
* nss/getent.c: Likewise.
2009-02-06 Joseph Myers <joseph@codesourcery.com>
* debug/pcprofiledump.c (print_version,
argp_program_version_hook): New function.
* elf/ldconfig.c (more_help): New function.
(argp): Use it.
* elf/sln.c (usage): New function.
(main): Support --help and --version.
* malloc/memusagestat.c (print_version): New function.
(argp_program_version_hook): New variable.
* nscd/nscd.c (more_help): New function.
(argp): Use it.
* posix/getconf.c (main): Send --version output to stdout.
Support --help.
* sunrpc/rpc_main.c (usage, options_usage): Take STREAM and STATUS
arguments. All callers changed.
(print_version): New function.
(parseargs): Support --help and --version.
* sunrpc/rpcinfo.c (usage): Take STREAM argument. All callers
changed.
(print_version): New function.
(main): Use getopt_long. Support --help and --version.
* sysdeps/unix/sysv/linux/lddlibc4.c (main): Support --help and
--version.
2009-02-06 Ulrich Drepper <drepper@redhat.com>
* posix/regexec.c (prune_impossible_nodes): Handle sifted_states[0]
being NULL also if there are no backreferences.
* posix/rxspencer/tests: Add testcases.
file descriptors with close-on-exec set.
(exec_comm_child): Fix the case where the write end of the pipe is
STDOUT_FILENO already. In case it is, clear close-on-exec.
2008-03-29 Eric Blake <ebb9@byu.net>
Rewrite string searches to O(n) rather than O(n^2).
* string/str-two-way.h: New file. For linear fixed-allocation
string searching.
* string/memmem.c: New implementation.
* string/strstr.c: New implementation.
* string/strcasestr.c: New implementation.
* sysdeps/posix/getaddrinfo.c (getaddrinfo): Call _res_hconf_init
opr.ctx_type.
(calc_first): Initialize constraint field.
(duplicate_node_closure): Use it instead of special casing ANCHORS.
Use search_duplicated_node to avoid loops. Fix grammar.
(duplicate_node): Merge constraint field for all node types.
(calc_eclosure_iter): Look at constraint field for all node types.
* posix/regex_internal.c (create_cd_newstate): Don't look at
create_cd_newstate.
* posix/tst-rfc3484.c: Add dummy definition of _res_hconf_init.
* posix/tst-rfc3484-2.c: Likewise.
* posix/tst-rfc3484-3.c: Likewise.
field. Use sockaddr_in6 for source_addr.
(get_scope): Change type of parameter to sockaddr_in6. Adjust.
(match_prefix): Likewise.
(get_label): Likewise.
(get_precedence): Likewise.
(rfc3484_sort): Change to use indirect access to results array.
Adjust to use of sockaddr_in6. Replace service_order test with
simple index comparison.
(getaddrinfo): Define order array. Initialize it. Don't initialize
service_order field. Adjust qsort_t calls. Access sorted result
array indirectly through order array.
* posix/tst-rfc3484.c: Adjust for change of rfc3484_sort.
* posix/tst-rfc3484-2.c: Likewise.
* posix/tst-rfc3484-3.c: Likewise.
(struct in6addrinfo): Add index element.
Declare __check_native.
* inet/Makefile (aux): Add check_native.
* sysdeps/unix/sysv/linux/check_native.c: New file.
* sysdeps/unix/sysv/linux/check_pf.c: No need to recognize
IFA_F_TEMPORARY. Pass back ifa_index.
* sysdeps/posix/getaddrinfo.c: Remove netlink compatibility code.
(rfc3484_sort): Add new parameter. Implement rule 7 correctly:
call __check_native if necessary.
(getaddrinfo): Fill in index field. Use qsort_r instead of qsort
to sort addresses. Pass information about the results.
* posix/tst-rfc3484.c: Adjust for addition of index field and change
of rfc3484_sort interface.
* posix/tst-rfc3484-2.c: Likewise.
with __warning__/__error__ attributes.
(__warnattr): Define.
* stdlib/bits/stdlib.h (__realpath_chk_warn, __ptsname_r_chk_warn,
__mbstowcs_chk_warn, __wcstombs_chk_warn): New aliases with
__warnattr.
(realpath, ptsname_r, mbstowcs, wcstombs): Call __*_chk_warn instead
of __*_chk if compile time detectable overflow is found.
* libio/bits/stdio2.h (__fgets_chk_warn, __fread_chk_warn,
__fgets_unlocked_chk_warn, __fread_unlocked_chk_warn): New aliases
with __warnattr.
(fgets, fread, fgets_unlocked, fread_unlocked): Call __*_chk_warn
instead of __*_chk if compile time detectable overflow is found.
(__gets_alias): Rename to...
(__gets_warn): ... this. Add __warnattr.
(gets): Call __gets_warn instead of __gets_alias.
* socket/bits/socket2.h (__recv_chk_warn, __recvfrom_chk_warn): New
aliases with __warnattr.
(recv, recvfrom): Call __*_chk_warn instead of __*_chk if compile
time detectable overflow is found.
* posix/bits/unistd.h (__read_chk_warn, __pread_chk_warn,
__pread64_chk_warn, __readlink_chk_warn, __readlinkat_chk_warn,
__getcwd_chk_warn, __confstr_chk_warn, __getgroups_chk_warn,
__ttyname_r_chk_warn, __getlogin_r_chk_warn, __gethostname_chk_warn,
__getdomainname_chk_warn): New aliases with __warnattr.
(read, pread, pread64, readlink, readlinkat, getcwd, confstr,
getgroups, ttyname_r, getlogin_r, gethostname, getdomainname): Call
__*_chk_warn instead of __*_chk if compile time detectable overflow
is found.
(__getgroups_chk): Rename argument to __listlen from listlen.
(__getwd_alias): Rename to...
(__getwd_warn): ... this. Add __warnattr.
(getwd): Call __getwd_warn instead of __getwd_alias.
* wcsmbs/bits/wchar2.h (__wmemcpy_chk_warn, __wmemmove_chk_warn,
__wmempcpy_chk_warn, __wmemset_chk_warn, __wcsncpy_chk_warn,
__wcpncpy_chk_warn, __fgetws_chk_warn, __fgetws_unlocked_chk_warn,
__mbsrtowcs_chk_warn, __wcsrtombs_chk_warn, __mbsnrtowcs_chk_warn,
__wcsnrtombs_chk_warn): New aliases with __warnattr.
(wmemcpy, wmemmove, wmempcpy, wmemset, mbsrtowcs, wcsrtombs,
mbsnrtowcs, wcsnrtombs): Call __*_chk_warn instead of __*_chk if
compile time detectable overflow is found.
(wcsncpy, wcpncpy): Likewise. For constant __n fix check whether
to use __*_chk or not.
(fgetws, fgetws_unlocked): Divide __bos by sizeof (wchar_t), both
in comparisons which function should be called and in __*_chk*
arguments. Call __*_chk_warn instead of __*_chk if compile time
detectable overflow is found.
(swprintf, vswprintf): Divide __bos by sizeof (wchar_t) in
__*_chk argument.
* debug/tst-chk1.c (do_test): Add a few more tests.
* misc/bits/syslog.h (syslog): When __va_arg_pack is defined,
implement as __extern_always_inline function.
(vsyslog): Define as __extern_always_inline function unconditionally.
* libio/bits/stdio2.h (sprintf, snprintf, printf, fprintf):
When __va_arg_pack is defined, implement as __extern_always_inline
functions.
(vsprintf, vsnprintf, vprintf, vfprintf): Define as
__extern_always_inline functions unconditionally.
* libio/bits/stdio.h (vprintf): Ifdef out the inline when
bits/stdio2.h will be included.
* wcsmbs/bits/wchar2.h (__swprintf_alias): New redirect.
(swprintf, wprintf, fwprintf): When __va_arg_pack is defined,
implement as __extern_always_inline functions.
(vswprintf, vwprintf, vfwprintf): Define as
__extern_always_inline functions unconditionally.
* debug/tst-chk1.c (do_test): Enable remaining tests for C++.
2007-09-03 Jakub Jelinek <jakub@redhat.com>
* misc/sys/cdefs.h (__extern_inline, __extern_always_inline): Only
define in C++ for GCC 4.3+, in C++ always use __gnu_inline__
attribute.
* include/features.h (__USE_EXTERN_INLINES): Define only when
__extern_inline is defined.
* stdlib/stdlib.h: Include bits/stdlib.h when __extern_always_inline
is defined instead of when not __cplusplus.
* misc/sys/syslog.h: Include bits/syslog.h when __extern_always_inline
is defined instead of when not __cplusplus.
* socket/sys/socket.h: Include bits/socket2.h when
__extern_always_inline is defined instead of when not __cplusplus.
* libio/stdio.h: Include bits/stdio2.h when __extern_always_inline
is defined instead of when not __cplusplus.
* posix/unistd.h: Include bits/unistd.h when __extern_always_inline
is defined instead of when not __cplusplus.
* string/string.h: Include bits/string3.h when __extern_always_inline
is defined instead of when not __cplusplus.
* wcsmbs/wchar.h: Include bits/wchar2.h when __extern_always_inline
is defined instead of when not __cplusplus.
(btowc, wctob): Don't guard the inlines with ifndef __cplusplus.
* io/fcntl.h: Don't include bits/fcntl2.h if __extern_always_inline
is not defined.
* misc/bits/syslog-ldbl.h: Guard *_chk stuff with
defined __extern_always_inline instead of !defined __cplusplus.
* libio/bits/stdio-ldbl.h: Likewise.
* wcsmbs/bits/wchar-ldbl.h: Likewise.
* misc/bits/syslog.h (syslog): Don't define for C++.
(vsyslog): Use __extern_always_inline function for C++ instead of
a macro.
* libio/bits/stdio.h (__STDIO_INLINE): Define to __extern_inline
whenever that macro is defined.
(vprintf): Don't provide the inline for C++.
(fread_unlocked, fwrite_unlocked): Don't define the macros for C++.
* libio/bits/stdio2.h (sprintf, snprintf, printf, fprintf): Don't
define the macros for C++.
(vsprintf, vsnprintf, vprintf, vfprintf): Define as
__extern_always_inline functions for C++.
* io/sys/stat.h (stat, lstat, fstat, fstatat, mknod, mknodat,
stat64, lstat64, fstat64, fstatat64): Don't define if not
__USE_EXTERN_INLINES.
* wcsmbs/bits/wchar2.h: Fix #error message.
(swprintf, wprintf, fwprintf): Don't define the macros for C++.
(vswprintf, vwprintf, vfwprintf): Define using
__extern_always_inline functions for C++.
* string/bits/string3.h: Don't #undef macros if __cplusplus.
(memcpy, memmove, mempcpy, memset, bcopy, bzero, strcpy, stpcpy,
strncpy, strcat, strncat): Define as __extern_always_inline
functions instead of macros for C++.
* math/bits/cmathcalls.h: Guard __extern_inline routines with
defined __extern_inline.
* sysdeps/alpha/fpu/bits/mathinline.h (__MATH_INLINE): Define
to __extern_inline whenever that macro is defined.
* sysdeps/ia64/fpu/bits/mathinline.h (__MATH_INLINE): Likewise.
* sysdeps/i386/fpu/bits/mathinline.h (__MATH_INLINE): Likewise.
* sysdeps/i386/i486/bits/string.h (__STRING_INLINE): Likewise.
* sysdeps/s390/bits/string.h (__STRING_INLINE): Likewise.
* sysdeps/s390/fpu/bits/mathinline.h (__MATH_INLINE): Likewise.
* sysdeps/powerpc/fpu/bits/mathinline.h (__MATH_INLINE): Likewise.
* sysdeps/x86_64/fpu/bits/mathinline.h (__MATH_INLINE): Likewise.
* sysdeps/sparc/fpu/bits/mathinline.h (__MATH_INLINE): Likewise.
* sysdeps/unix/sysv/linux/sys/sysmacros.h (gnu_dev_major,
gnu_dev_minor, gnu_dev_makedev): Remove __extern_inline from
prototypes. Only provide __extern_inline routines if
__USE_EXTERN_INLINES.
* debug/Makefile: Add rules to build and run tst-{,lfs}chk{4,5,6}
tests.
* debug/tst-chk1.c (do_prepare, do_test): Allow compilation as C++.
For now avoid some *printf tests in C++. Skip all testing
if __USE_FORTIFY_LEVEL is defined, but __extern_always_inline macro
is not.
* debug/tst-chk4.cc: New file.
* debug/tst-chk5.cc: New file.
* debug/tst-chk6.cc: New file.
* debug/tst-lfschk4.cc: New file.
* debug/tst-lfschk5.cc: New file.
* debug/tst-lfschk6.cc: New file.
* include/wchar.h (__vfwprintf_chk, __vswprintf_chk): Avoid
prototypes in C++.
* include/stdio.h (__sprintf_chk, __snprintf_chk, __vsprintf_chk,
__vsnprintf_chk, __printf_chk, __fprintf_chk, __vprintf_chk,
__vfprintf_chk, __fgets_unlocked_chk, __fgets_chk): Likewise.
* posix/Makefile ($(inst_libexecdir)/getconf): Make hard links to
$(inst_bindir)/getconf if possible.
* posix/Makefile ($(objpfx)getconf.speclist): New target.
(generated): Add it.
($(inst_libexecdir)/getconf): Use it.
void **.
* nss/nsswitch.h (service_user): Use void * type for KNOWN field.
* nss/nss_files/files-hosts.c (LINE_PARSER): Cast host_addr to
char * to avoid warning.
* nis/nss_nis/nis-hosts.c (LINE_PARSER): Likewise.
* timezone/Makefile (CFLAGS-zdump.c): Add -fwrapv.
* locale/programs/ld-ctype.c (ctype_finish, set_class_defaults,
allocate_arrays): Cast second argument to charmap_find_symbol
to char * to avoid warnings.
* locale/programs/repertoire.c (repertoire_new_char): Change
from_nr, to_nr and cnt to unsigned long, adjust printf format
string.
* locale/programs/ld-collate.c (insert_value, handle_ellipsis):
Cast second argument to new_element to char * to avoid warnings.
* locale/weightwc.h (findidx): Cast &extra[-i] to const int32_t *.
* intl/gettextP.h (struct loaded_domain): Change plural to const
struct expression *.
* intl/plural-eval.c (plural_eval): Change first argument to
const struct expression *.
* intl/plural-exp.c (EXTRACT_PLURAL_EXPRESSION): Change first
argument to const struct expression **.
* intl/plural-exp.h (EXTRACT_PLURAL_EXPRESSION, plural_eval): Adjust
prototypes.
* intl/loadmsgcat (_nl_unload_domain): Cast away const
in call to __gettext_free_exp.
* posix/fnmatch.c (fnmatch): Rearrange code to avoid maybe
unitialized wstring/wpattern var warnings.
* posix/runtests.c (struct a_test): Make data field const char *.
* stdio-common/tst-sprintf2.c (main): Don't declere u, v and buf
vars if not LDBL_MANT_DIG >= 106.
* stdio-common/Makefile (CFLAGS-vfwprintf.c): Add -Wno-unitialized.
* stdio-common/vfprintf.c (vfprintf): Cast first arugment to
__find_specmb to avoid warning.
* rt/tst-mqueue1.c (do_one_test): Add casts to avoid warnings.
* debug/test-strcpy_chk.c (do_tests, do_random_tests): Add casts
to avoid warnings.
* sysdeps/ieee754/ldbl-96/s_roundl.c (huge): Add L suffix to
initializer.
* sysdeps/unix/clock_gettime.c (clock_gettime): Only define
tv var when it will be actually used.
* sunrpc/rpc_cmsg.c (xdr_callmsg): Cast IXDR_PUT_* to void
to avoid warnings.
* signal/signal.h <__USE_BSD || __USE_XOPEN_EXTENDED>: Define
__need_size_t and include stddef.h.
* sysvipc/sys/msg.h: Likewise.
* posix/sched.h: Likewise.
* hurd/hurd/signal.h (__need_size_t): Define.
* CONFORMANCE: ctype.h and wctype.h no longer define size_t,
neither does signal.h in pedantic ISO C namespaces. stdio.h
no longer defines wint_t or wchar_t.
